Best Selling Products

Silver Rocket Customized Porsche Motorsport Strut Tower Plates Applications: Porsche 718 (all models) Porsche 981 (all models) The Porsche front strut mount is uniform across all 981 and 718 model variants as part of the aluminum body structure. For GT and RS sub-models, which are frequently used on track, the pressure on the strut mount is significantly higher than for street-only cars. As a result, catastrophic front strut tower failures are more common in GT/RS models compared to standard models. To address this issue in Porsche factory race cars, they are equipped with Porsche Motorsport strut tower reinforcement plates designed to prevent such failures. These reinforcement plates effectively increase the strength and durability of the front strut tower mounting points, greatly reducing the risk of failure. The performance results are impressive, with race cars rarely experiencing strut mount failures compared to street cars. To bring this level of durability to GT/RS street cars, Silver Rocket has customized these Porsche Motorsport race car strut tower reinforcement plates for a direct fit. Now your GT/RS street car can benefit from the same structural reinforcement as a factory race car, allowing you to enjoy track time with confidence and safety. Silver Rocket Porsche Motorsport Strut Reinforcement Highlights Based on genuine Porsche Motorsports race car strut tower reinforcement plates Proven effective by thousands of Porsche 991 Cup and GT4 factory race cars over several years Custom-designed by Silver Rocket for a direct fit on Porsche 718 GT4/GT4 RS and 981 GT4 street cars Includes all necessary installation hardware and a detailed installation manual

Silver Rocket GT4 RS Dry Carbon Fiber 3" Wing Risers This product fits the following car: Porsche 718 GT4 RS (2022+) The Silver Rocket GT4 RS Dry Carbon Fiber 3-inch Wing Riser is the only carbon fiber riser available on the market that is 100% customized for the Porsche 718 GT4 RS model. It is the upgraded version of our best-selling Silver Rocket GT4 RS 3-inch wing riser (OEM AlSi7Mg casting). The Silver Rocket 3" Dry Carbon Fiber Wing Riser raises the Porsche 718 GT4 RS rear wing up 3 inches into the cleaner air flowing over the top of the car, adding downforce and improving rearward visibility from within the cockpit. Silver Rocket 3" CF Wing Riser Highlights Lightest Wing Riser: weighing in at only 3.3 lbs (1493g), the Silver Rocket 3" Dry Carbon Fiber Wing Riser is 2.4 lbs (1089g) lighter than the stock Porsche wing brackets, making it the lightest wing riser for the GT4 RS. Track-tested Quality: Silver Rocket uses 100% racing-grade dry carbon fiber in the making of this wing riser to ensure its superior quality. The riser has been rigorously tested both in the lab and on track, exhibiting great strength and stability under extreme conditions during lap time record tests. It can withstand over 500 lbs. of downforce even with the Porsche Clubsport Rear Wing, while maintaining extreme stability. Improved Rear Visibility: the Silver Rocket 3" Dry Carbon Fiber WIng Risers also provide added visibility benefits. See clearly through the rear mirror, crucial for high-speed racing safety. Enhanced Downforce: by extending the factory wing 3 inches higher, these Silver Rocket risers enhance rear downforce, delivering exceptional performance on both the track and street. Sleek Full Carbon Aesthetics: with its 100% dry carbon fiber construction, sleek design, and attention to detail, this wing riser elevates the overall appearance of your GT4 RS to a whole new level. Hassle-Free Installation: it is designed to be 100% OEM compatible, seamlessly integrating with your Porsche 718 GT4 RS. No need for drilling additional holes or complex modifications. Install with ease and get ready to experience the difference. The SR GT4 RS Dry Carbon Fiber 3-inch Wing Riser optimizes rear wing downforce by raising the factory wing 3 inches, further improving the car's aerodynamic performance. Additionally, it improves rear-view visibility to ensure that the driver's overall rear vision, particularly in high-pressure track environments, is not obstructed by the wing, significantly enhancing driving safety.

Sparco Superleggera K Kart Racing Suit FIA 8877-2022 Grade 1 Certified, Ultralight Elite Performance The Sparco Superleggera K Kart Racing Suit represents the pinnacle of Sparco’s karting innovation, delivering uncompromising safety, ultra-lightweight performance, and professional-grade comfort. Certified to the latest FIA 8877-2022 Grade 1 kart suit standard, the Superleggera K is purpose-built for serious kart racers competing at the highest levels. With its cutting-edge materials and driver-focused design, this suit sets the benchmark for the next generation of Sparco kart racing suits. Engineered with multi-layer ultra-lightweight construction and strategically placed stretch panels, the Superleggera K offers optimal ventilation, flexibility, and fit. Its precision tailoring, ergonomic cut, and breathable inner lining keep you cool and focused under pressure, making it one of the best karting suits for both sprint and endurance karting. Whether you're chasing a championship or looking for that competitive edge, this Sparco suit for karting provides the responsiveness and performance that elite drivers expect from a top-tier FIA kart suit. Now available at Discovery Parts, your trusted destination for premium race wear, expert support, and fast shipping. Experience why Sparco is the name trusted by champions worldwide—and why the Superleggera K is the ultimate lightweight kart suit for racers who demand the best. The Sparco Superleggera-K Kart Suit is the lightest kart suit Sparco has ever produced while adhering to the latest FIA 8877-2022 Grade 1 approval, ensuring the highest levels of safety. Its innovative AIR-IN system features silicone intakes at the shoulder, promoting cool airflow through the suit to keep you cooler and reduce perspiration during demanding race sessions. Sparco Superleggera K Suit Features and Benefits AIR-IN System: Silicone intakes at the shoulders channel cool airflow throughout the suit, enhancing comfort during intense competition. Ultra-Lightweight Fabric: Breathable, durable fabric weighing only 300 g/m², providing maximum freedom of movement and reducing fatigue. FIA 8877-2022 Grade 1 Approval: Certified to the latest international kart racing safety standard for maximum protection. Innovative Collar Fastening System: Improved ergonomic fastening for enhanced comfort and reduced distractions on track. Large Stretch Panel: Located on the lower back, offering optimized seating comfort and flexibility during races. Superior Breathability: Construction promotes airflow to manage perspiration and keep drivers cool under pressure. Infinity Option Availability: Custom design options available to match personal style preferences. During kart races, staying cool and dry is crucial for maintaining focus and achieving peak performance. The Sparco Superleggera-K suit effectively channels airflow through its innovative AIR-IN system, ensuring that you remain comfortable even in the heat of competition. Its ultra-lightweight fabric and breathable design work together to reduce perspiration and fatigue, allowing you to concentrate fully on driving without distraction. Investing in the Sparco Superleggera-K means choosing the lightest, most advanced karting suit available—offering enhanced airflow, safety, and freedom of movement to help you race at your best every time. Sparco Superleggera K Kart Racing Suit Technology Ultra-lightweight suit material Specially designed silicone air intakes to cool the driver Cordura back panels for abrasion resistance Hidden zipper and pockets for secure storage Perforated stretch panel on lower back for flexibility Certified to FIA 8877-2022 Grade 1 homologation standards Sparco Superleggera K Kart Racing Suit Size Chart Frequently Asked Questions (FAQ) – Sparco Superleggera K Kart Racing Suit What is the difference between a kart suit and an auto racing suit?A kart racing suit like the Sparco Superleggera K is specifically designed for karting, prioritizing abrasion resistance rather than fire protection. Since karting involves minimal fire risk, FIA kart suits like this one are not fire-retardant. In contrast, auto racing suits are built with flame-resistant materials and are certified to FIA or SFI standards for fire protection in car racing environments. Where are Sparco suits made?Sparco kart racing suits, including the Superleggera K, are designed and manufactured in Italy. Sparco is world-renowned for its commitment to Italian craftsmanship, performance innovation, and consistent quality control—making it a top choice for racers globally. What is the Sparco Superleggera K kart racing suit?The Sparco Superleggera K is an ultra-premium, ultra-lightweight FIA 8877-2022 kart suit designed for professional and competitive kart racers. It features an advanced multi-layer construction, optimized fit, and ventilation system to keep drivers cool, agile, and protected during demanding race sessions. It’s the lightest karting suit Sparco has ever made. What is the Sparco Superleggera K made of?This lightweight kart suit uses state-of-the-art materials, including abrasion-resistant outer layers and breathable mesh inserts. Its multi-layer construction is engineered to reduce fatigue, improve flexibility, and deliver maximum driver comfort without compromising FIA safety standards. Is the Sparco Superleggera K FIA certified?Yes. The Superleggera K is homologated to the current FIA 8877-2022 kart suit standard, which is required for most FIA-sanctioned karting competitions. It meets the highest safety benchmarks for kart racing suits worldwide. Is this a lightweight kart suit?Absolutely. The Sparco Superleggera K is the lightest karting suit in Sparco’s lineup, specifically engineered for high-performance racing where weight savings and mobility can make a critical difference. Who is the Sparco Superleggera K ideal for?This suit is ideal for serious kart racers—whether you're competing in junior, senior, or elite-level classes. It’s designed for drivers who demand the ultimate in weight reduction, ventilation, and ergonomic design while staying compliant with the latest FIA kart suit regulations. Why choose Sparco for karting gear?Sparco kart racing suits are known for their combination of performance, comfort, and Italian craftsmanship. With decades of motorsports heritage and cutting-edge innovation, Sparco continues to be the brand of choice for world-class racers.

Sparco X-Light FE Driver Race Suit Full Efficiency Tech Extended to the X-Light Suit Line The Sparco X-Light Full Efficiency Race Suit offers superior lightweight comfort with a focus on sustainability, crafted from regenerated materials to reduce waste while maintaining top-tier safety standards. Engineered with cutting-edge features like breathable inserts and ultra-flat seams, it ensures the ultimate in comfort, protection, and eco-responsibility. Key features, benefits, and outcomes: Regenerated Material Construction: Utilizes recycled fabric from Sparco's production process, reducing waste and CO₂ emissions by 7kg per suit, benefiting the environment without sacrificing performance or safety. 2-Layer Lightweight Design: Incorporates Sparco’s latest lightweight materials, ensuring high-level protection while keeping weight at a minimum, allowing you to perform without added bulk. Breathable Inserts in Groin Area: Provides targeted airflow in high-heat zones, promoting cooling during intense driving sessions and enhancing comfort. Fully Floating Pre-Curved Sleeves: Uses advanced fabric construction for unrestricted arm movement, giving you optimal flexibility and reducing muscle strain during extended wear. Anti-Abrasion Elasticated Lower Back Panel: Ensures a snug fit without restriction in the seated position, minimizing friction and discomfort for a smoother driving experience. Ultra-Flat Internal Seams: Reduces pressure points, decreasing fatigue over long periods by minimizing internal friction against the skin. Seamless Cuffs and Ankles: Delivers a sleek, irritation-free finish around extremities, enhancing comfort and ease of movement. Hidden Pockets: Discreet storage options within the suit, providing secure space for small essentials without affecting the suit's fit or profile. Adjustable Velcro Belt: Allows you to fine-tune the fit for your body, ensuring stability and comfort throughout the race. Fully focused on delivering exceptional heat and flame protection, the Sparco X-Light Full Efficiency Race Suit keeps you both safe and comfortable during high-intensity drives. The breathable inserts channel airflow exactly where you need it, reducing heat buildup so you stay cool under pressure. Ultra-flat seams and seamless cuffs minimise potential pressure points, which means reduced fatigue even over prolonged sessions. With its precision-engineered design, every component works together to ensure freedom of movement, preventing restriction during those crucial moments on the track. Choose a suit that combines environmental responsibility with race-grade performance. Experience the Sparco X-Light Full Efficiency Race Suit and see the difference in comfort, protection, and eco-conscious engineering. The hallmark of the Sparco X-Light FE race suit is its innovative, advanced design with an extra focus on comfort and efficiency using 70% regenerated fibers and is LCA Certified. The Sparco X-Light race suit pushes the boundaries of Sparco’s revolutionary lightweight race suit design, using a lightweight Nomex outer layer along with an ultra-soft inner layer comprised of 90% regenerated fibers which provides superior fire protection with a comfortable feel. The Sparco X-Light features stretch panel technology derived from Sparco's Hocotex® Eagle suit. This specially-engineered stretch fabric is lighter and more durable than traditional elastic fabric. The Sparco X-Light race suit has pre-curved fully floating sleeves with stretch elbow panels, multi directional back stretch panels along with full side stretch panels that run from under the arm to the thighs. The X-Light race suit has another unique feature which is a breathable stretch panel that runs from inner thigh to inner thigh. The X-Light suit has the most stretch panels of any Sparco suit which gives ultimate comfort in the seated driving position. The X-Light FE is available in three colors in sizes from EU48-66. The X-Light FE race suit is FIA 8856-2018 approved. Sparco X-Light FE Driver Race Suit Details: Lightweight, comfortable fabric weighs a mere 270g/m2 Three-layer construction for maximum protection Pre-curved arms with elbow stretch panels Fully floating knit sleeves Multi-directional rear stretch panels create a fully-floating upper Full side mesh stretch panel Inner thigh mesh stretch panel FIA 8856-2018 homologated Sparco X-Light FE Driver Race Suit Sizing Chart

Sparco Gulf Racing Driver Suit The Golden Age of Endurance Racing Brought Back to Life! In the golden years of endurance racing, Sparco and Gulf Racing contributed to the triumphs of the best racing drivers in the world. Now this partnership is renewed, and fans of the Gulf Racing historical livery have access to beautiful re-creations of the original Sparco products. All of Sparco's Gulf Racing reproductions have been updated with the newest Sparco safety technology and carry current FIA homologations. Classic Racing Heritage Meets Modern Technology The Sparco Gulf Racing Replica Race Suit is made with all-new lightweight three-layer fabric. It offers superior fire protection, breathability, and comfort when compared to the original worn back in the day. The suit features iconic Gulf Racing embroideries and patches to faithfully recreate the original look. The Gulf Racing replica race suit is made from Sparco's latest generation fabrics, offering a soft, lightweight outer fabric and breathable inserts at the sides, plus a large lower-back stretch panel for maximum comfort. The Sparco Gulf Racing Replica Race Suit also features a light-weight zipper and collar, pre-curved arms, pockets, classic tone-on-tone box quilt stitching and Sparco's signature epaulettes. Available in sizes EU48 - EU66. Sparco Gulf Replica Race Suit Details: Gulf Racing embroideries Lightweight three-layer fabric Pre-curved arms  Lightweight zipper and collar Breathable stretch panels FIA 8856-2018 approved Suit only (shoes, helmet, gloves, balaclava, house and car not included)

CAK-65 Lightweight Race Car Antenna Racing Radios Lightweight CAK-65 wave monopole race car radio antenna includes a flexible wire ground plane with a detachable radio antenna SMA connector and lightweight cabling. Easily installs with included hex locknuts. ANTENNA FEATURES Manufacturer: Racing Radios Manufacturer part no.: RR-CAK-65 Detachable SMA connector radio antenna Lightweight cabling Easy installation Flexible ground wire plane Upgraded lightweight cable with configurable adapter connector CONFIGURABLE ADAPTER Your choice of adapter cabe configurations. Choose between BNC, BNC90, Mini UHF, and Mini UHF90 connectors. QUALITY AND RELIABILITY Today's top professional teams and drivers use the CAK-65 (CAK65) Racing Radio Antenna. That is why they have been The Leader in Racing Communications Worldwide since 1979. Please note: this is a custom-made item and will require a one to two days to build. As a custom-made part, it is non-returnable.

Sparco Circuit / Circuit II Carbon Fiber Racing Seat 2028 Expiry The Sparco Circuit Carbon is the carbon fiber version of the Circuit QRT which is a competition seat designed to provide additional head and neck protection. It is constructed with light weight “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The Circuit Carbon includes integrated bolsters to protect the head from lateral impacts. This seat can be used with an FHR (frontal head restraint) device for even greater protection. The ultra-light shell is features impact-absorbing material surround on the headrest. It has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The Circuit Carbon is FIA 8859-1999 approved. SPARCO CIRCUIT CARBON FIBER RACE SEAT TECHNOLOGY Ultralight Pre-Preg Carbon Fiber shellExcellent fitment (for a head restraint seat) into smaller cockpitsExcellent ergonomicsFire-retardant fabricSpecial non-slip fabricFIA 8859-1999 The Sparco Circuit Carbon Fiber is an ultra-light competition seat specifically designed for circuit use. Made from carbon fiber, the Sparco Circuit Carbon Fiber has an ultra-light shell. The Sparco Circuit Carbon Fiber includes integrated bolsters to protect the head. This seat can be used with a Hans device for even greater protection. The ultra-light shell is then wrapped in an impact-absorbing and fire retardant fabric that helps hold the body.  The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear. The Sparco Circuit Carbon Fiber is FIA approved and available in two sizes: Circuit (Standard) and Circuit II (Large). The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear. SPARCO CIRCUIT SIZING Small / Narrow – up to a 32” waist (pants size) SPARCO CIRCUIT II SIZING Medium – up to a 36” waist (pants size)

Racing Radios Helmet Adapter IMSA-US Stay Connected on the Track with the Racing Radios Helmet Adapter IMSA to 5/C (US Connection) When every millisecond counts, you can’t afford to have your communication system drop the ball. Enter the Racing Radios Helmet Adapter IMSA to 5/C (US Connection)—a sleek, high-performance solution for bridging your 4/C IMSA racing helmet to a 5/C US wiring car harness. It's your fast pass to seamless communication, whether you're battling for pole position or just trying to avoid a chaotic pit stop. Features That Make This Adapter a Game-Changer 4/C Male (IMSA Wiring) to 5/C Female (US Wiring): Your IMSA-wired helmet meets its match for ultimate compatibility with US-standard systems. Top-Tier Materials: High-quality cabling and components ensure durability and reliability, race after race. Effortless Conversion: Transforms your 4/C racing helmet into a 5/C car harness connection without the hassle—or the headache. Experience the Difference Picture this: you’re tearing through the back straight, engine roaring, adrenaline pumping. Your crew chief’s calm voice comes through crystal clear: “Box, box, box.” No static. No missed cues. Just razor-sharp communication to keep your race strategy on point. With this adapter, you don’t just connect—you conquer. Specifications Connection Type: 4/C Male (IMSA Wiring) to 5/C Female (US Wiring) Cable Quality: Built to withstand the wear and tear of motorsport conditions Application: Ideal for track days, endurance racing, and competitive motorsport setups Racing Radios Helmet Adapter IMSA-US FAQs 1. Will this work with any IMSA-wired helmet?Yes, if your helmet has IMSA 4/C wiring, this adapter is ready to plug and play with your US-style 5/C harness. 2. How durable is this adapter?It’s made from high-quality materials designed to survive the rigors of racing, from bumpy circuits to long endurance events. 3. Why do I need an adapter for 4/C to 5/C?This adapter bridges the gap between IMSA-wired helmets and US-wired systems, saving you the cost and hassle of replacing your entire comm setup. 4. Can I use this adapter for other racing series?Absolutely! This adapter is versatile and works for most setups requiring a 4/C to 5/C connection. Make Every Second Count Don’t let a communication hiccup be the reason you miss your best lap—or your team’s crucial instructions. With the Racing Radios Helmet Adapter IMSA to 5/C (US Connection), you get reliable, race-ready communication in a compact, easy-to-use package. 🏁 Click Add to Cart now and gear up for the next green flag. Your crew chief—and your lap times—will thank you!

Racing Radios Helmet Adapter IMSA to 5/C When you're pushing limits on the track, precision isn't just important—it's everything. The Racing Radios Helmet Adapter IMSA to 5/C isn't just an adapter; it's your ticket to flawless in-car communication. Whether you're coordinating a pit stop or carving through an apex, this little gem ensures your message is as clear as your line. Features That Make You Feel Like a Pro 4/C Female to 5/C Male Adapter: Seamlessly bridges your 4/C IMSA racing helmet to your 5/C car harness. It's like finding that missing puzzle piece for your comms setup. Selectable Driver ID: With a built-in detent switch, choose Driver IDs 1 through 5—ideal for multi-driver endurance races or pit crew efficiency. Premium Cabling & Components: Built to endure the rigors of motorsport, this adapter won’t quit when you’re in the heat of competition. Versatile Connectivity: Converts your trusty 4/C racing helmet into a 5/C car-ready setup, saving you from a costly helmet upgrade. Feel the Difference on Track Imagine flying into a hairpin corner, your crew chief calling the perfect moment to brake. With this adapter, there’s zero interference, zero static—just the crystal-clear connection you need to shave precious seconds off your lap time. It’s not just a piece of gear; it’s peace of mind at 150 mph. Specifications Compatibility: 4/C IMSA female wiring to 5/C male connection Driver ID Options: 5 selectable positions (1–5) Cable Quality: Racing-grade durability Application: Perfect for endurance racing, multi-driver events, or anyone upgrading to a 5/C car harness FAQs 1. Can I use this adapter with any IMSA-wired helmet?Absolutely! If your helmet is wired for 4/C IMSA, this adapter is plug-and-play compatible. 2. What does the Driver ID feature do?The Driver ID feature allows your team to know exactly who’s in the car. No more guessing games when swapping drivers during endurance events. 3. Is this adapter durable enough for extreme racing conditions?Yes! With high-quality materials and robust design, it’s built to handle everything from bumpy tracks to rainy race days. 4. Will this work with my existing 5/C car harness?You bet. It’s specifically designed to convert 4/C IMSA helmets to pair with 5/C in-car systems seamlessly. Your Next Best Move Don’t let communication failures slow you down. Equip yourself with the Racing Radios Helmet Adapter IMSA to 5/C and stay in sync with your crew, no matter the pace. Hit the apex of performance, safety, and teamwork—because every second counts. 🚦 Ready to gear up? Click Add to Cart now and get race-day-ready!

Stilo ST6 FN Carbon Fiber 8860-2018 Racing Helmet The Legendary Stilo Carbon Helmet - Forever Ahead For over 25 years Stilo has lead the way in racing helmet innovation, and the new ST6 line marks a bold new chapter. With input from Porsche and F1 teams, Stilo developed enhanced front and top aerodynamics to deliver exceptional performance from the new Stilo ST6 line of helmets. Developed with the world's top drivers from Formula One and endurance racing, the ST6 reflects real-world needs at ever level of auto racing. The ST6 carbon fiber helmet is one of the lightest helmets on the market. Featuring enhanced airflow, visibility, and comfort while maintaining market-leading safety standards. Developed with input from the Aston martin F1 team, every feature of the ST6 including the track-tested aerodynamics and a cutting edge dual lock visor system, its designed to give racers a performance edge. The Brand New Stilo ST6 helmet improves on the market-leading Stilo ST5 in every way including; 10% Lighter than Stilo ST5 26% More Airflow than Stilo ST5 11% More Visibility More Comfortable Liner and Cheek pads More Shell Sizes for Lower Weight Better Visor Construction for Durability and Ease of Care Higher Quality Visor Hardware for Increased Reliability Stilo ST6 FN 8860 Carbon Fiber Auto Racing Helmet Features Puro Tech - Stilo's proprietary carbon fiber manufacturing process eliminates the need for extra lacquers or additional coatings, minimizing the weight of your new helmet. With the Puro process, Stilo delivers the lightest and safest helmet on the market. New Shell Size Options - ST6 FN Now offered in four shell sizes, the Stilo ST6 FN auto racing helmet allows you to receive the lightest and smallest shell size possible for your head shape. Increased Airflow Design - by utilizing our key partnerships with Formula One teams we have redesigned our front ventilation to increase airflow while maximizing safety. The new Stilo ST6 also comes standard with ventilation holes in the top channeling airflow through the EPS foam to reduce sweat and moisture to keep you performing at your best.   Increased Downward Visibility - with input from professional drivers around the globe, Stilo has increased the downward Field of view of the Stilo ST6 carbon fiber helmet creating a wider field of vision for greater awareness on the track.   Interior Comfort - New and improved, the Stilo ST6 carbon fiber helmet cheek padding is redesigned to enhance stability and increase comfort.   Injection Molded Visor - brand new high performance visors provide exceptional vision and are coated in a new high performance washable anti-fog treatment. Dual Visor Lock - pioneering the industry, this dual visor lock complies with FIA standards both in fully closed and ventilation positions.   Updated Visor Hardware - designed for easy installation and smoother activation, this visor hardware can be purchased in a variety of anodized finishes. Stilo ST6 FN Carbon Fiber 8860-2018 Racing Helmet Sizing Chart  Stilo ST6 FN 8860-2018 Carbon Fiber Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: AA0810AG1R Homologation: FIA 8860-2018 Compatible shields: Stilo ST6 helmet shields Noise-attenuating earmuffs included Other Versions of the Stilo ST6 Racing Helmet Stilo ST6 GT SA2020 Carbon Fiber Helmet Stilo Helmet ST6 FN 8859-ABP Helmet Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Zero ABP 8860-2018 Carbon Fiber Helmet Stilo ST6 GT Composite Helmet Stilo ST6 FN 8859-ABP Helmet Stilo ST6 GT 8860 Carbon Fiber Helmet Stilo ST6 FN 8860-ABP Carbon Fiber Helmet Stilo ST6 FN Carbon Fiber Helmet Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet Stilo ST6 FN 8860-2018 Carbon Fiber Helmet Questions & Answers What certification does the Stilo ST6 FN Carbon Fiber Helmet have?The Stilo ST6 FN is homologated to the FIA 8860-2018 helmet standard. What head shape is the Stilo ST6 FN designed for?The ST6 FN is designed around an intermediate oval head shape. How much lighter is the ST6 than the ST5?Stilo states that the ST6 platform is approximately 10% lighter than the previous ST5 generation. Does the ST6 have more ventilation than the ST5?Yes. The ST6 provides approximately 26% more airflow than the ST5 through redesigned front ventilation and top airflow channels. Does the Stilo ST6 FN provide more visibility?Yes. The ST6 provides approximately 11% more visibility than the ST5, including an increased downward field of view. How many shell sizes does the ST6 FN use?The ST6 FN platform uses four shell sizes to better match the external shell to the driver's head size and help reduce unnecessary weight and bulk. What is Stilo Puro technology?Puro is Stilo's carbon fiber manufacturing process designed to minimize unnecessary coatings and finishing materials, helping reduce helmet weight while maintaining the required structural performance. What type of visor does the ST6 FN use?The ST6 FN uses an injection-molded Stilo ST6 visor with a washable high-performance anti-fog treatment. What is the dual visor lock?The ST6 dual visor lock allows the visor to be securely positioned in both the fully closed and ventilation positions while meeting the applicable FIA requirements. Are ST5 shields compatible with the ST6 FN?No. The ST6 FN uses the redesigned Stilo ST6 visor and hardware system and requires compatible ST6 helmet shields. Does the ST6 FN include noise-attenuating earmuffs?Yes. Noise-attenuating earmuffs are included with the helmet. What is the difference between the ST6 FN and ST6 GT?The ST6 FN does not have the integrated side communication and hydration ports found on the ST6 GT. The FN is designed for racers who prefer a cleaner and more streamlined helmet configuration. Does this helmet require a signature for delivery?Yes. A signature is required when this helmet is delivery

CMS Performance Bolt In Roll Bar For FR-S/BRZ/GT86 This Roll Bar Fits The Following Cars: Scion FR-S (ZN6), 2013-2016 Toyota GT86 (ZN6), 2017-2020 Subaru BRZ (ZC6), 2013-2020 THE SUPERIOR BOLT-IN ROLL BAR FOR THE FR-S/BRZ/GT86 The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the first-gen Scion FR-S, Toyota GT86, and Subaru BRZ. Engineered with a premium placed on safety and structural rigidity, the exceptional design of the CMS Performance Roll Bar integrates perfectly with the car's sporty, all-business interior. CMS Performance uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength, impact absorption, and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used by other roll bar manufacturers. This makes the CMS Performance Roll Bar for the Scion FR-S/Toyota GT86/Subaru BRZ superior in every way, including resistance to deformation, weld integrity, and energy dissipation. The one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. The rearward kickers are optimized for support in a roll-over event while maintaining an unobstructed rear view for the driver. The main hoop cross bar is designed to locate your racing harness shoulder straps at the proper angle (0° to -20° front-to-back) to the driver's shoulders regardless of seat position. TRUE BOLT-IN INSTALLATION, SUPERIOR SAFETY Click Here for Installation Instructions The CMS Performance Roll Bar bolts directly to chassis strong points without the need for any significant modifications to the chassis or use of under-car backing plates. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. EXCEPTIONAL COLOR OPTIONS SET CMS PERFORMANCE APART Each CMS Performance roll bar includes custom powder coating in your choice of color-matched factory paint colors for Scion, Toyota, and Subaru1. You don't have to settle for generic black or red. CMS Performance can also powder coat your roll bar in one of our amazing technical colors, such as the astoundingly cool Superchrome! And, of course, there's always our rich satin black option for a stealthy installation. REAR SEAT DELETE CMS Performance offers an optional Shrader rear seat delete kit made specifically for the Scion FR-S, Toyota GT86, and Subaru BRZ. You will need to make some modifications to the RSD to fit around the mounting points of your CMS Performance roll bar. The end result is it gives your installation a finished look. CMS PERFORMANCE: THE BEST PRODUCTS AT THE BEST PRICE An unwavering focus on cutting-edge materials, unsurpassed design & construction, and premium fit & finish has propelled CMS Performance roll bars to the top of the industry. The CMS Performance Scion FR-S/Toyota GT86/Subaru BRZ Roll Bar is the latest addition to our growing catalog, offering unsurpassed safety, integrity, design and customization to customers taking this amazing car to the next level on the street or at the track. CMS PERFORMANCE SCION FR-S/SUBARU BRZ ROLL BAR DETAILS Manufacturer: CMS Performance Manufacturer Part: CPRB-GT86 Materials: 1.75″ X .095" Docol R8 Advanced High Strength Steel Features: One-piece main hoop for superior strength and occupant safety; proprietary kicker design eases installation while maintaining exceptional strength CNC-cut mounting plates CNC machined high-strength-steel interlocking joints Allows full seat travel with virtually any seat All USA-made Grade 8 hardware included Comes with detailed installation instructions This product is intended for off-road race track use only. 1 Note: CMS Performance powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car.

Stilo ST5 CHEEK PADS With USA FLAG Elevate your racing experience with the Stilo ST5 Cheek Pads, now featuring a patriotic touch with the American flag embroidered into each pad. Designed to offer unparalleled comfort and personalized fit, these cheek pads allow drivers to tailor their helmet for optimal performance on the track. Available in a range of thicknesses including 20mm, 25mm, 30mm, 33mm, and 35mm, these cheek pads provide the flexibility to accommodate different head shapes and comfort preferences. Whether you're aiming for a snug fit or a bit more room to maneuver, our cheek pads ensure maximum comfort and stability during every race. To ensure the best fitting experience, we highly recommend visiting one of our authorized Stilo dealers. Our expert staff will assist you in selecting the appropriate cheek pad size to complement your helmet size and enhance your overall racing experience. It's important to note that Stilo helmets are known for their snug fit, and our cheek pads offer the added benefit of adjustability even after purchasing your helmet. With the American flag embroidered into each pad, you can showcase your patriotism while enjoying customized comfort and performance on the track.

AiM Sports Tire Temperature Sensor Kit AiM Tire Temperature sensors have been specifically designed to measure the surface temperature of tires, providing important info for chassis tuning, tire management, and driver behavior. AiM sensors have a 35° field-of-view to measure temperatures between -20ºC and 120°C (-4ºF and 248ºF) and provide a 0-5V output signal. The four AiM Tire Temperature sensors come in a kit including an Infrared Temperature Controller device, necessary for connection to MyChron5/5S/2T. Installation should done using the dedicated installation bracket kit. AiM KARTING TIRE TEMPERATURE SENSOR KIT DETAILS Manufacturer: AiM Sports Manufacturer part no.: X08TTK014120 IR Temperature Controller Output: 0-5V Field of View: 35° Temperature range: -20° to 120°C (-4ºF to 248ºF) IR temperature controller dimensions: 127.6 x 32 x 39mm IR temperature controller cable length: 400mm (15.8 in.) Sensor dimensions: 26.6 x 17.2mm Sensor cable length: 250mm (9.8 in.) WHAT'S IN THE BOX? (1) IR temperature controller (4) Tire temperature sensors (1) Power Cable (2) 712+719  patch cables, 4-pin, 1m (3.3 ft.) length (2) 712+719  patch cables, 4-pin, 2m (6.6 ft.) length Optional: Installation bracket kit X90KSTTS0 (add it in the dropdown above) AiM MyChron dash/data-logger sold separately.

CMS Performance Sub Strap + Lap Belt Mount for GT350/GT350R/S550 This Mount Fits All Variants of the Following Cars: Ford Performance Shelby GT350 (2015-2020) Ford Performance Shelby GT350R (2016-2020) Ford Performance Shelby GT500 (2021+) Ford S550 Mustang GT (2015-2023) The Best Way to Mount Harness Lap and Sub Belts in Your Shelby Mustang The CMS Performance Sub Strap + Lap Belt Mount is designed to be installed and used with your factory Ford Performance seats, giving you strong, secure mounting points for racing harness lap- and sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original Ford mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap + Lap Belt Mount provides an extremely strong structure to which you can clip or bolt your harness lap belts and wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap + Lap Belt Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap + Lap Belt Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap + Lap Belt Mount Details: Manufacturer: CMS Performance Manufacturer part no.: CMS-SL-003 Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Harness Install Kit For C7 Corvette This Product Fits The Following Cars: Chevrolet Corvette Stingray & Z51, C7 (2014-2019) Chevrolet Corvette Z06, C7 (2015-2019) Quick and Easy Installation of Harness Lap Belts in the C7 Corvette The CMS Performance Harness Install Kit for the C7 Corvette provides two strong, secure anchors for the lap belts of your racing harness using the factory seats of your C7 Corvette. Each CMS Performance C7 Corvette Harness Install Kit is for one seat (driver or passenger side, the kit works on either seat). Ordering two kits saves you $25 overall and you can install a harness for your passenger or instructor. CMS Performance is 100% Designed and Built in the USA All CMS Performance products are designed, constructed, and finished in our USA manufacturing and powder coating facility. The CMS Performance C7 Corvette Harness Install Kit is CNC cut and fully TIG-welded from high-strength stainless steel, then powder coated a rich satin black to blend seamlessly into your interior when you don't have harnesses installed. Complete detailed instructions make installation straightforward (figure about an hour if you're reasonably handy). Click here for installation instructions. For the C7 Corvette, we recommend the Schroth Profi II ASM or Sabelt Steel Series four-point harnesses for use with this kit. Schroth's proprietary Anti-Submarine (ASM) technology was developed specifically for use in street cars like the C7 Corvette without a sub strap a pass-through in the seats. Sabelt's four point Steel Series offers an alternative that gives you a significant safety upgrade at a reasonable price! CMS Performance Harness Install Kit Details: Manufacturer: CMS Performance manufacturer Part: Harninstall-C7 Construction: 360o TIG welded stainless steel Finish: Satin black powder coat Designed, manufactured, and powder coated by CMS Performance in the USA This product is intended for off-road use only.