Best Selling Products

Stilo ST5 & ST 5.1 Helmet Owner's Kit The Perfect Accessories For Your Stilo ST5/ST5.1 Helmet This kit has everything you need to get the most out of your Stilo ST5 or ST5.1 helmet, including a Stilo Race Gear Bag to keep your helmet, HANS device, and other racing gear safe and secure. Plus the proper care products to ensure your helmet and visor stay clean, fresh, and last for years. What Makes Up the Stilo Helmet Owner's Kit? Stilo YY0070 Race Gear Bag fits your Stilo ST5 or ST5.1 helmet, most brands of head-and-neck restraints, and other track-day gear. Acrysol* shield cleaner, the only cleaner recommended by Stilo for use with their helmet shields Molecule Refresh 16 oz. spray gets the funk out and keeps your helmet looking & smelling fresh * Note: Acrysol is only safe to use on Stilo ST5 and ST5.1 shields. It should not be used on Stilo ST6 shields or other helmet brands.

Bell KC7-EV CMS Karting Helmet The Bell KC7-EV CMS Karting Helmet is engineered for young racers who demand professional-level protection, exceptional visibility, and lightweight comfort. Based on Bell's Formula 1-proven HP7 helmet platform, the KC7-EV combines advanced carbon-fiberglass composite construction, an extra-wide eyeport, and an efficient ventilation system in a helmet developed specifically for junior karting competition. Certified to Snell-FIA CMS-2016, the Bell KC7-EV delivers the protective performance required for applicable youth karting categories while maintaining a lightweight shell designed to minimize unnecessary strain on developing drivers. Its aerodynamic design and advanced multi-density liner provide a balance of impact protection, stability, and comfort for competitive racing. One of the KC7-EV's most distinctive features is its expanded eyeport, which is more than 20mm wider than the standard Bell KC7-CMR and provides approximately 30% greater peripheral visibility. This increased field of vision helps young racers maintain awareness of nearby competitors, identify racing lines, and react confidently during close karting competition. The helmet also includes an optical-grade 2mm Double Screen Anti-Fog visor, 14-channel ventilation system, and synthetic rubber eyeport gasket. Whether competing in local karting events, regional championships, or demanding race weekends, the Bell KC7-EV CMS offers advanced technology for the next generation of motorsport competitors. Bell KC7-EV CMS Karting Helmet Features Snell-FIA CMS-2016 Certified: Homologated to the children's motorsport helmet standard for applicable youth karting categories. Extra-Wide Eyeport: More than 20mm wider than the standard KC7-CMR, providing approximately 30% greater peripheral visibility. Lightweight Carbon-Fiberglass Composite Shell: Advanced shell construction combines impact protection, structural strength, and reduced helmet mass. HP7-Inspired Design: Developed using technology and design principles from Bell's Formula 1-proven HP7 platform. Advanced Multi-Density Liner: Multi-piece energy-absorbing interior designed to manage impact forces effectively. 2mm Double Screen Anti-Fog Visor: Optical-grade injected DSAF shield helps minimize fogging and preserve visibility. 14-Channel Ventilation System: Integrated top and chin-bar ventilation with air intake and extraction channels for improved airflow. Aerodynamic Shell Profile: Optimized shell and shield design helps improve aerodynamic performance and reduce internal noise. Synthetic Rubber Eyeport Gasket: Creates a protective seal that helps prevent dirt and water from entering the helmet. Durable Karting Interior: Non-fire-retardant black fabric and synthetic leather lining engineered for comfort and durability. Optional Air Intake Accessories: Compatible with designated Bell ventilation accessories for customized airflow. Optional Rear Spoiler: Supports compatible aerodynamic components sold separately. SE07EV Shield System: Uses the model-specific Bell SE07EV 2mm visor and SV(SE07) pivot kit. Expanded Size Range: Available in nine sizes from 51 through 59. Classic White Finish: Professional racing appearance suitable for personalized racing graphics. Youth-Specific Engineering: Developed with helmet weight, comfort, and visibility considerations for young drivers. Snell-FIA CMS2016 Certified Youth Karting Protection The Bell KC7-EV is homologated to Snell-FIA CMS-2016, a children's motorsport helmet standard developed for youth racing applications. The certification establishes protective performance requirements while accounting for the importance of minimizing helmet mass for younger competitors. Its advanced carbon-fiberglass composite shell works together with a multi-density, multi-piece energy-absorbing liner to manage impact forces. This protective system is designed to provide reliable performance while maintaining a balanced, lightweight helmet. The KC7-EV is intended for junior karting categories that accept CMS2016-certified helmets. Drivers should confirm the applicable age restrictions and certification requirements of their racing organization before purchasing. Extra-Wide Eyeport with 30% Greater Peripheral Visibility The Bell KC7-EV CMS features an expanded eyeport developed specifically to increase driver visibility. Compared with the standard KC7-CMR helmet, the KC7-EV visor opening is more than 20mm wider, delivering approximately 30% greater peripheral vision. This expanded viewing area provides an important advantage for young racers competing in close karting environments. Improved peripheral visibility helps drivers monitor surrounding competitors when entering corners, defending positions, and executing overtaking maneuvers. The larger eyeport also provides a more open field of vision, helping drivers identify braking points, maintain accurate kart placement, and remain aware of changing track conditions. Lightweight Carbon-Fiberglass Composite Shell The Bell KC7-EV CMS uses a lightweight carbon-fiberglass composite shell designed to balance structural strength, impact management, and reduced weight. Bell specifies an approximate weight of 1,185 grams for sizes 51 through 56 and 1,230 grams for sizes 57 through 59, with a manufacturing tolerance of plus or minus 3%. Lower helmet mass is particularly beneficial for younger competitors, helping reduce unnecessary neck loading during repeated cornering forces and extended racing sessions. The aerodynamic shell profile is based on Bell's HP7 design platform and is engineered to provide a stable and comfortable racing experience. Advanced 14-Channel Ventilation System The Bell KC7-EV features a high-efficiency ventilation system incorporating 14 air intake and extraction channels. Strategically positioned openings in the upper shell and chin bar promote airflow throughout the helmet, helping manage interior temperatures during demanding racing conditions. Improved ventilation is especially valuable during hot-weather karting events, where drivers may participate in multiple practice sessions, qualifying runs, and races throughout the day. The KC7-EV can be used with or without compatible Bell air-intake accessories, allowing drivers to customize the ventilation configuration for different conditions. 2mm Double Screen Anti-Fog Visor The Bell KC7-EV CMS includes an optical-grade injected 2mm Double Screen Anti-Fog visor engineered to provide clear visibility and reduce condensation. Its double-screen construction helps manage fogging during changing temperatures, high humidity, and wet-weather competition. The larger shield opening also provides the expanded peripheral visibility that distinguishes the KC7-EV from the standard KC7-CMR. A synthetic rubber eyeport gasket helps prevent water, dirt, and airborne debris from entering the helmet while the visor is closed. The KC7-EV uses the model-specific Bell SE07EV 2mm shield and SV(SE07) pivot kit. Drivers should select replacement visors specifically designated for KC7-EV compatibility rather than substituting standard KC7-CMR shields. HP7-Inspired Aerodynamics and Racing Stability Derived from Bell's Formula 1-proven HP7 platform, the KC7-EV incorporates a streamlined shell and shield design intended to improve aerodynamic stability and reduce internal wind noise. The aerodynamic construction helps provide a controlled and comfortable experience during high-speed karting sessions, supporting concentration and consistent driving performance. Compatible Bell rear spoilers and ventilation accessories are available separately for drivers seeking additional aerodynamic customization. Comfortable Youth-Specific Interior The Bell KC7-EV features a durable black interior combining high-strength comfort fabric and synthetic leather. These materials are selected to provide support and comfort throughout competitive karting events. The interior uses non-fire-retardant materials developed specifically for karting rather than automobile racing applications. Combined with the helmet's lightweight shell and carefully engineered padding, the interior is designed to provide a stable, supportive fit that helps minimize excessive helmet movement. Bell KC7-EV CMS vs. Bell KC7-CMR Both the Bell KC7-EV CMS and Bell KC7-CMR are lightweight youth karting helmets derived from Bell's HP7 design platform. They share advanced composite construction, multi-density impact liners, efficient ventilation, and Double Screen Anti-Fog visor technology. The most significant difference is the eyeport. The KC7-EV features an expanded opening that is more than 20mm wider than the standard KC7-CMR, providing approximately 30% additional peripheral visibility. The KC7-EV also offers an extended size range from 51 through 59 and uses a dedicated SE07EV visor system. The standard KC7-CMR carries Snell-FIA CMR2016 certification, while the KC7-EV is homologated to Snell-FIA CMS2016. Drivers should select the model that provides the best fit, visibility, and certification compatibility with their karting series. Bell KC7-EV CMS Karting Helmet Specifications Manufacturer: Bell Racing Model: KC7-EV CMS Helmet Category: Youth Full-Face Karting Helmet Homologation: Snell-FIA CMS-2016 Shell Construction: Carbon-Fiberglass Composite Impact Liner: Multi-Density, Multi-Piece Energy-Absorbing Liner Approximate Weight, Sizes 51–56: 1,185 g (+/- 3%) Approximate Weight, Sizes 57–59: 1,230 g (+/- 3%) Eyeport: Extra-Wide, Over 20mm Wider Than KC7-CMR Peripheral Visibility: Approximately 30% Greater Than KC7-CMR Visor: Optical-Grade 2mm Double Screen Anti-Fog Replacement Shield: Bell SE07EV 2mm Pivot Kit: SV(SE07) Ventilation: 14 Air Intake and Extraction Channels Eyeport Seal: Synthetic Rubber Gasket Interior: Non-Fire-Retardant High-Comfort Fabric and Synthetic Leather Interior Color: Black Available Sizes: 51, 52, 53, 54, 55, 56, 57, 58, 59 Exterior Color: White Optional Accessories: Compatible Air Intakes, Rear Spoiler, Replacement Visors, and Tear-Offs HANS/FHR Compatibility: Not Compatible Road Use: Not Intended for Road Use Recommended Application: Competitive Youth Kart Racing Bell KC7-EV CMS Karting Helmet Sizing Chart Frequently Asked Questions Is the Bell KC7-EV CMS certified for competitive karting? Yes. The Bell KC7-EV carries Snell-FIA CMS-2016 homologation and is designed for youth karting categories that recognize this certification. Always confirm your racing organization's current helmet requirements. What is the difference between the Bell KC7-EV and KC7-CMR? The KC7-EV features an eyeport more than 20mm wider than the standard KC7-CMR, delivering approximately 30% greater peripheral visibility. It also offers sizes 51 through 59 and uses a model-specific SE07EV shield. The helmets carry different youth karting homologations. What certification does the Bell KC7-EV carry? The KC7-EV CMS is homologated to Snell-FIA CMS-2016. It should not be confused with the standard KC7-CMR, which carries Snell-FIA CMR-2016 certification. How much more visibility does the KC7-EV provide? Bell specifies that the KC7-EV has a visor opening more than 20mm wider than the standard KC7-CMR, providing approximately 30% greater peripheral vision. Is the Bell KC7-EV a full carbon fiber helmet? No. The KC7-EV uses a lightweight carbon-fiberglass composite shell. It is not constructed entirely from carbon fiber. How much does the Bell KC7-EV weigh? Bell lists approximately 1,185 grams for sizes 51 through 56 and 1,230 grams for sizes 57 through 59, with a manufacturing tolerance of plus or minus 3%. Does the Bell KC7-EV include an anti-fog visor? Yes. The helmet includes an optical-grade 2mm Double Screen Anti-Fog visor designed to reduce condensation and maintain clear visibility. What replacement visor fits the Bell KC7-EV? The KC7-EV uses the Bell SE07EV 2mm visor with the SV(SE07) pivot kit. This model-specific shield should not be confused with the standard KC7-CMR SE07 2mm shield. Can I use a standard KC7-CMR visor on the KC7-EV? No. The KC7-EV requires the dedicated SE07EV 2mm shield designed for its expanded eyeport. Always confirm replacement visor compatibility before purchasing. Does the Bell KC7-EV have good ventilation? Yes. The KC7-EV features 14 air intake and extraction channels designed to improve airflow and manage heat during racing. Can the Bell KC7-EV be fitted with a rear spoiler? Yes. Bell offers compatible rear aerodynamic spoilers separately. Use accessories specifically approved for the KC7-EV. Is the Bell KC7-EV compatible with a HANS device? No. The KC7-EV is not designed for HANS or other Frontal Head Restraint anchor systems. Is the Bell KC7-EV interior fireproof? No. The helmet features a durable non-fire-retardant interior designed for karting. It should not be used as a substitute for an automobile racing helmet where fire-resistant construction is required. What sizes are available for the KC7-EV? The KC7-EV is available in nine sizes: 51, 52, 53, 54, 55, 56, 57, 58, and 59. Is the Bell KC7-EV designed for younger drivers? Yes. The KC7-EV is engineered for youth karting, with a lightweight composite shell, expanded visibility, and a size range designed to accommodate smaller head circumferences. Drivers must meet their racing organization's applicable age and helmet certification requirements. Can the Bell KC7-EV be used for automobile racing? The KC7-EV is designed for karting and carries Snell-FIA CMS-2016 homologation. Automobile racing organizations commonly require different helmet certifications and protective features. Always follow your specific racing regulations. Does the Bell KC7-EV accommodate prescription glasses? The enlarged eyeport may provide additional room for certain prescription glasses. Actual compatibility depends on the frame shape and individual helmet fit. Always test the combination before racing. Is the KC7-EV suitable for endurance karting? Yes. Its lightweight construction, improved visibility, 14-channel ventilation system, and DSAF visor make it a practical option for extended youth karting sessions where its certification is accepted. How do I clean the Bell KC7-EV helmet? Clean the exterior using a soft microfiber cloth and manufacturer-approved cleaning products. Avoid harsh solvents, abrasive materials, and excessive heat. Follow Bell's recommendations for cleaning the interior and maintaining the visor. Can the Bell KC7-EV be custom painted? The white exterior provides a suitable base for custom racing graphics. Any painting or modification should follow Bell's instructions and use materials and methods approved for helmet shells. Why choose the Bell KC7-EV CMS Karting Helmet? The Bell KC7-EV combines Snell-FIA CMS2016 homologation, lightweight carbon-fiberglass construction, an extra-wide eyeport, 14-channel ventilation, and advanced DSAF visor technology. Its larger viewing area and expanded sizing options make it an excellent choice for young racers seeking protection, visibility, and comfort.

Bell HP7 EVO-IV Carbon Fiber FIA 8860-2018 Helmet The Bell HP7 EVO-IV Carbon Fiber Helmet is Bell Racing's flagship FIA 8860-2018 full-face racing helmet, developed through close collaboration with leading Formula 1 drivers and teams. Engineered for professional drivers competing at the highest levels of motorsport, the HP7 EVO-IV combines an ultra-lightweight carbon fiber shell, advanced impact-energy management, exceptional ventilation, and aerodynamic performance. Designed for both open-cockpit and closed-cockpit competition, the HP7 EVO-IV gives racers access to Bell's advanced aerospace composite technology and multi-density energy-absorbing liner system while maintaining the comfort required for long and demanding race sessions. FIA 8860-2018 Advanced Helmet The Bell HP7 EVO-IV is homologated to the FIA 8860-2018 standard. This high-level FIA helmet specification is intended for professional drivers competing in high-speed motorsports where advanced impact performance and lightweight construction are critical. The HP7 EVO-IV is the FIA 8860-2018 version of Bell's HP7 platform. Drivers specifically requiring FIA 8860-2018 ABP ballistic protection should select the HP77 rather than the standard HP7 EVO-IV. High-Strength Carbon Fiber Shell The HP7 EVO-IV features an ultra-lightweight high-strength and high-modulus carbon fiber shell. Bell's advanced carbon construction is designed to provide exceptional structural performance while minimizing unnecessary helmet weight and bulk. The carbon shell is finished in Bell's distinctive matte carbon appearance, exposing the premium motorsport construction that defines the High Performance Series. Advanced Multi-Density Impact Liner Inside the carbon shell is an advanced multi-density, multi-piece energy-absorbing liner. The liner system is engineered to manage impact energy while maintaining the compact dimensions and comfortable fit required for professional racing. Optical-Grade DSAF Shield The Bell HP7 EVO-IV uses an optical-grade injection-molded Double Screen Anti-Fog (DSAF) shield. The dual-screen construction helps control fogging while providing excellent optical clarity in changing cockpit and weather conditions. The HP7 EVO-IV uses the Bell SE07 3mm shield with the SV(SE07) pivot system. Replacement clear, tinted, and specialty shield options are available separately. 12-Channel Ventilation System Bell equips the HP7 EVO-IV with a powerful top and chin-bar ventilation system featuring 12 intake and extraction channels. The system uses a two-piece center intake together with low-profile side intakes to move air through the helmet while maintaining aerodynamic efficiency. The ventilation design also helps reduce internal noise and improve driver comfort during long racing sessions. Aerodynamic Shell and Shield Design The shell and shield system are designed as an integrated aerodynamic package. The HP7 EVO-IV's streamlined profile helps manage airflow around the helmet while reducing unnecessary turbulence and internal noise. Drivers can further tune the helmet's aerodynamic characteristics with optional Bell accessories including a rear spoiler, top gurney, and chin-bar gurney. Integrated Communication System Channels The HP7 EVO-IV includes integrated channels within the face area that provide multiple routing options for racing communication equipment. This allows radio wiring and related communication components to be installed more cleanly without unnecessary interference with the helmet's interior fit. Drink Tube Compatible The HP7 EVO-IV can also be configured for hydration use. Available configurations provide routing for a drink tube, and a special-order frontal chin-bar opening is available for drivers requiring direct hydration-system integration. Factory-Installed HANS Anchors Factory-installed HANS anchors are included as original equipment, making the HP7 EVO-IV ready for use with compatible Head and Neck Restraint systems. Synthetic Rubber Visor Seal A synthetic rubber gasket surrounds the eyeport to help prevent dirt and water from entering the helmet around the shield opening. This additional sealing is particularly useful for racers competing in open-cockpit cars or changing weather conditions. Bell HP7 EVO-IV Features FIA 8860-2018 homologation Developed with leading Formula 1 drivers and teams High-strength and high-modulus carbon fiber shell Ultra-lightweight High Performance Series construction Advanced multi-density, multi-piece impact liner Optical-grade Double Screen Anti-Fog shield Bell SE07 3mm shield compatibility SV(SE07) pivot system 12 intake and extraction ventilation channels Top and chin-bar ventilation Aerodynamically optimized shell and shield design Integrated communication-system channels Drink-tube installation capability Factory-installed HANS anchors Synthetic rubber eyeport gasket Optional rear spoiler available Optional top gurney available Optional chin-bar gurney available Matte carbon fiber finish Helmet bag included Designed for Open and Closed-Cockpit Racing The HP7 EVO-IV is suitable for a broad range of high-level motorsport applications. Its aerodynamic profile and lightweight construction make it an excellent option for open-cockpit competition, while its comfort, ventilation, and communication compatibility also make it highly effective in sports cars and GT racing. HP7 EVO-IV vs. HP77 EVO-IV The HP7 EVO-IV is homologated to FIA 8860-2018 and is suitable for both open and closed-cockpit racing. The HP77 EVO-IV builds on the HP7 platform and adds the Advanced Ballistic Protection required for FIA 8860-2018 ABP homologation. If your racing series specifically requires FIA 8860-2018 ABP certification, choose the HP77 EVO-IV. If FIA 8860-2018 is the required standard, the HP7 EVO-IV provides Bell's premium carbon construction without the additional ABP specification. Bell HP7 EVO-IV Shield Compatibility The HP7 EVO-IV uses the Bell SE07 3mm shield. Multiple replacement shield options are available for different lighting and racing conditions. Bell HP7 EVO-IV Interior Colors The standard HP7 EVO-IV interior uses Bell's Dark Grey High Strength – High Comfort fire-resistant fabric. Alternative interior colors are available by special order, including Tan, White, Red, Purple, Blue, Green, Neon Yellow, Pink, and Orange. Special-order interiors may require additional production time and cost. Available Helmet Sizes The Bell HP7 EVO-IV is available in sizes 54, 55, 56, 57, 58, 59, 60, 61, and 61+. Proper helmet fit is essential. Measure around the widest portion of the head with a flexible measuring tape and compare the result with the Bell sizing chart before choosing your helmet size. Bell HP7 EVO-IV Carbon Fiber Helmet Sizing Chart Bell HP7 EVO-IV Carbon Fiber Helmet Questions & Answers What certification does the Bell HP7 EVO-IV have?The Bell HP7 EVO-IV is homologated to the FIA 8860-2018 standard. Is the Bell HP7 EVO-IV carbon fiber?Yes. It features an ultra-lightweight high-strength and high-modulus carbon fiber shell. Is the HP7 EVO-IV the same as the HP77 EVO-IV?No. The HP7 EVO-IV meets FIA 8860-2018, while the HP77 EVO-IV adds Advanced Ballistic Protection and meets the FIA 8860-2018 ABP standard. Can the HP7 EVO-IV be used in open-cockpit racing?Yes. The HP7 EVO-IV is designed for professional motorsports and is suitable for both open-cockpit and closed-cockpit racing applications. What shield does the Bell HP7 EVO-IV use?The HP7 EVO-IV uses the Bell SE07 3mm shield with the SV(SE07) pivot system. Does the shield have anti-fog protection?Yes. The HP7 EVO-IV uses an optical-grade Double Screen Anti-Fog shield designed to help control visor fogging. How many ventilation channels does the HP7 EVO-IV have?The helmet uses 12 intake and extraction channels through the top and chin-bar ventilation system. Does the Bell HP7 EVO-IV come with HANS anchors?Yes. Factory-installed HANS anchors are included as original equipment. Can communications be installed in the HP7 EVO-IV?Yes. Integrated channels in the face area provide multiple options for routing compatible racing communication systems. Can a drink tube be installed?Yes. The HP7 EVO-IV can accommodate drink-tube routing, and a special-order frontal chin-bar opening is available for certain hydration-system installations. Can aerodynamic accessories be added?Yes. Bell offers compatible rear spoilers, top gurneys, and chin-bar gurneys separately. Does the HP7 EVO-IV include a helmet bag?Yes. A Bell helmet bag is included. What interior comes standard?Dark Grey High Strength – High Comfort fire-resistant fabric is standard. Several custom interior colors are available by special order. What sizes are available?Bell offers the HP7 EVO-IV in sizes 54 through 61+. Does this helmet require a signature for delivery?Yes. This helmet ships with signature required for delivery.

Bell BR8 ULTRA Carbon Fiber Racing Helmet | Snell SA2025 The Bell BR8 ULTRA Carbon Fiber Auto Racing Helmet is engineered for racers who demand lightweight protection, exceptional ventilation, and maximum versatility in extreme racing environments. Designed specifically for off-road racing, dirt track competition, desert racing, and other demanding motorsports, the BR8 ULTRA combines advanced carbon fiber construction with Bell Racing's innovative configurable forced-air ventilation system. Unlike traditional racing helmets with fixed ventilation configurations, the Bell BR8 ULTRA SA2025 allows drivers to customize their airflow using an included conversion kit. Choose between standard ventilation, left or right side-air, left or right three-quarter top-air, or full top-air configurations without switching helmets. Featuring a lightweight carbon fiber shell, aerodynamic front duckbill, Double Screen Anti-Fog (DSAF) visor, and advanced dust-management technology, the BR8 ULTRA delivers the performance and flexibility serious racers need to stay cool, comfortable, and focused behind the wheel. Bell BR8 ULTRA Carbon Fiber Helmet Features Snell SA2025 Certified: Meets the latest Snell Special Application helmet safety standard. Lightweight Carbon Fiber Shell: Advanced carbon construction offers excellent strength-to-weight performance. Configurable Forced-Air Ventilation: Includes a conversion kit for standard, side-air, three-quarter top-air, and top-air configurations. DSAF Anti-Fog Visor: Double Screen Anti-Fog technology provides a positive visor seal to help reduce fogging. Aerodynamic Front Duckbill: Designed to improve aerodynamic performance at racing speeds. Rear-Facing Venturi Vents: Promote airflow while helping prevent dirt and debris from entering the helmet. Internal Air-Chamber System: Distributes forced air around the head and toward the eyeport for improved cooling. Advanced Impact Liner: Multi-density, multi-piece construction provides energy absorption and impact protection. Integrated Communication Channels: Accommodates optional racing radios and hydration systems. Removable Ear Cups: Included ear cups allow drivers to customize comfort and communication setup. M6 Head Restraint Mounts: Integrated mounting provisions for compatible frontal head restraint anchors. Fire-Resistant Interior: Premium dark grey, high-comfort, fire-resistant fabric. Gloss Carbon Fiber Finish: Premium exposed carbon fiber appearance. Lightweight Carbon Fiber Construction The Bell BR8 ULTRA features a premium lightweight carbon fiber shell designed to provide exceptional performance in demanding racing conditions. The advanced carbon construction offers excellent rigidity while minimizing unnecessary helmet weight, helping reduce driver fatigue during extended racing sessions. Inside the helmet, Bell incorporates an advanced multi-density, multi-piece impact liner engineered to absorb and manage energy during impacts. The BR8 ULTRA also features a premium dark grey fire-resistant interior designed to provide a comfortable, secure fit throughout long races and demanding off-road events. Five Configurable Ventilation Systems in One Helmet One of the BR8 ULTRA's most innovative features is its convertible forced-air ventilation system. Instead of purchasing separate helmets for different racing vehicles or air delivery configurations, drivers can customize the helmet using the included forced-air nozzle and cover plate conversion kit. Available ventilation configurations include: Standard Ventilation: Traditional helmet airflow without a connected forced-air system. Left or Right Side-Air: Routes forced air through either side of the helmet to accommodate different cockpit arrangements. Left or Right Three-Quarter Top-Air: Provides elevated air intake positioning for efficient cooling and cockpit compatibility. Full Top-Air: Directs forced air into the upper helmet ventilation system for enhanced airflow distribution. The included conversion components make the BR8 ULTRA especially valuable for drivers competing in multiple vehicles, racing disciplines, or cockpit configurations. Optional aftermarket forced-air accessories, including compatible Quick Lock and MagLock connections, are available separately. Advanced Dust Management and Venturi Airflow Dirt, dust, and airborne debris are constant challenges in off-road and dirt track racing. Bell designed the BR8 ULTRA with rear-facing Venturi ventilation outlets to help maintain consistent airflow while reducing the amount of dirt and debris entering the helmet. The rear-facing vent configuration promotes air exchange through the helmet, helping improve comfort in hot and dusty racing environments. Combined with the internal air-chamber system, the ventilation design helps distribute fresh air around the driver's head and toward the front eyeport when connected to a compatible forced-air system. Double Screen Anti-Fog Visor Technology The Bell BR8 ULTRA includes a clear Double Screen Anti-Fog (DSAF) visor designed to improve visibility in demanding conditions. The DSAF system uses a double-screen construction and positive visor seal to help reduce fogging caused by temperature differences and moisture inside the helmet. A synthetic rubber eyeport gasket helps reduce the entry of dust, dirt, and water around the visor opening. Together, these features help maintain clear vision during off-road racing, endurance competition, and changing weather conditions. Aerodynamic Front Duckbill for Racing Stability The BR8 ULTRA features an integrated aerodynamic front duckbill designed to improve helmet performance in moving airflow. Its low-profile design works with the helmet's carbon fiber shell to help manage airflow while maintaining the aggressive appearance associated with Bell's professional motorsport helmet lineup. The front duckbill is included with the helmet. Ready for Race Communications and Hydration The Bell BR8 ULTRA is designed to accommodate the communication and hydration equipment commonly required in endurance and off-road racing. Integrated channels within the helmet's face section provide routing options for compatible hydration tubes and radio communication wiring. The helmet also includes ear cups that may be used or removed according to the driver's preferred configuration. Optional communication electronics, microphones, drink tubes, and related accessories are sold separately. Bell BR8 ULTRA Carbon Fiber Helmet Specifications Manufacturer: Bell Racing Helmets Model: BR8 ULTRA Manufacturer Part Number: 1238B Helmet Type: Full-Face Auto Racing Helmet Primary Applications: Off-Road, Dirt Track, Desert Racing, and Motorsports Shell Material: Lightweight Carbon Fiber Finish: Gloss Carbon Fiber Certification: Snell SA2025 Head Shape: Intermediate Oval Interior: Dark Grey Fire-Resistant Fabric Impact Liner: Multi-Density, Multi-Piece Construction Ventilation: Convertible Forced-Air System Conversion Kit: Included Front Duckbill: Included Visor: Clear Bell SRV-8 Shield Included Visor Pivot Kit: Bell SRV-1 Anti-Fog System: Double Screen Anti-Fog (DSAF) Ear Cups: Included, Removable Head Restraint Compatibility: M6 Frontal Head Restraint Mounting Terminals Communication System: Compatible with Optional Electronics Hydration System: Compatible with Optional Drink Tube Helmet Size Range: 57- Through 61+ Bell BR8 ULTRA Carbon Fiber Helmet Sizing Chart Bell BR8 ULTRA Frequently Asked Questions What makes the Bell BR8 ULTRA ideal for off-road and dirt track racing? The BR8 ULTRA combines a lightweight carbon fiber shell with configurable forced-air ventilation, rear-facing Venturi vents, and an anti-fog visor system. These features are designed to improve comfort and visibility in hot, dusty racing environments. Is the Bell BR8 ULTRA Snell SA2025 certified? Yes. The Bell BR8 ULTRA carries Snell SA2025 certification. Always confirm helmet eligibility with your racing organization before competition. Can the Bell BR8 ULTRA be converted between different forced-air configurations? Yes. The included conversion kit allows the helmet to be configured for standard ventilation, left or right side-air, left or right three-quarter top-air, or full top-air operation. Does the BR8 ULTRA include the forced-air conversion kit? Yes. The helmet includes the conversion components needed to configure its forced-air intake locations. External forced-air blowers and compatible hoses are available separately. What is the benefit of the rear-facing Venturi vents? The rear-facing Venturi vents help maintain airflow through the helmet while reducing the entry of airborne dirt and debris, making them especially useful during off-road and dirt racing. Does the Bell BR8 ULTRA come with a clear visor? Yes. The helmet includes a clear Bell SRV-8 visor with Double Screen Anti-Fog technology. Can I install a racing radio or hydration system? Yes. Integrated channels provide routing options for compatible radio wiring and hydration tubes. Communication and hydration components are sold separately. Are ear cups included with the BR8 ULTRA? Yes. The helmet includes ear cups and can be used with or without them, allowing drivers to customize their fit and communication setup. Is the BR8 ULTRA compatible with HANS devices? Yes. The helmet features M6 mounting terminals for compatible frontal head restraint anchors. Appropriate approved anchors and hardware must be used according to the restraint manufacturer's installation requirements. What head shape does the Bell BR8 ULTRA fit? The BR8 ULTRA is designed around an intermediate oval head shape. Proper fit should always be confirmed before racing. Why Choose the Bell BR8 ULTRA Carbon Fiber Helmet? The Bell BR8 ULTRA Carbon Fiber Racing Helmet delivers an exceptional combination of lightweight construction, adaptable ventilation, and advanced protection for drivers competing in demanding racing environments. With its convertible forced-air system, aerodynamic front duckbill, DSAF anti-fog visor, rear-facing dust-resistant ventilation, and premium carbon fiber shell, the BR8 ULTRA is engineered for serious racers who refuse to compromise on comfort or performance. Whether you're tackling desert races, dirt track competition, or endurance events, the Bell BR8 ULTRA offers the versatility to adapt to your vehicle, racing conditions, and personal equipment preferences.

Bell XR7 ULTRA Carbon Fiber SA2025 Racing Helmet Dual-certified carbon performance for race-day confidence The Bell XR7 ULTRA Carbon is built for serious track work: featherweight strength, crisp visibility, and cooling that actually keeps up during long sessions. With dual certification to FIA 8859-2024 and Snell SA2025, it checks the boxes for club, pro-am, and many pro-level series while keeping comfort and focus front and center. Bell XR7 ULTRA Carbon Fiber SA2025 Helmet Features Carbon fiber shell engineered for high impact energy management while minimizing weight for reduced neck fatigue on long stints Dual homologation: FIA 8859-2024 and Snell SA2025 for broad series acceptance in the U.S. and internationally Refined aerodynamics help stabilize the helmet at speed and reduce lift and turbulence in open- and closed-cockpit cars Multi-channel ventilation promotes steady airflow to manage heat and visor fog in hot, humid conditions SE07 DSAF clear shield included for durable anti-fog performance and wide, distortion-free field of view Hydration and radio ready with ports designed for clean installs and quick pit-lane connections Removable, replaceable interior padding to dial in fit and keep things fresh through the season Bell XR7 ULTRA Carbon Fiber SA2025 Helmet Size Chart Bell XR7 ULTRA Carbon Fiber FIA8859-2024/SA2025 Helmet FAQs Is the XR7 ULTRA Carbon legal for FIA events? The FIA 8859-2024 approval covers many international series; always confirm with your sanctioning body and rulebook. How does the XR7 ULTRA compare to RS7 and X7D models? XR7 targets a lightweight, dual-certified spec with race-day ventilation and stability; RS7 and X7D occupy adjacent weight/feature positions depending on series needs. Can I add hydration and comms? Yes. The shell and liner are designed for tidy hydration tube routing and radio kit integration without compromising fit. Step into the grid with a helmet that blends modern certifications, low weight, and track-proven cooling.

Bell GT6 ULTRA Carbon Fiber Helmet Discover Your Competitive Edge The Bell GT6 ULTRA Carbon Fiber Helmet brings modern design, lightweight protection, and advanced safety certification together for serious closed-cockpit racers. Inspired by the top-tier HP6, the GT6 ULTRA Carbon combines a sleek carbon shell with a wide eye port, customizable ventilation, and optional communication integration for drivers who demand peak performance and comfort. Built to the latest FIA 8859-2024 and Snell SA2025 standards, the Bell GT6 ULTRA Carbon is designed for endurance, GT, and touring car drivers. Its lightweight carbon construction enhances strength without sacrificing comfort, while multiple cooling and communication options make it a versatile tool for long stints behind the wheel. Whether you’re chasing podiums or logging training laps, this helmet ensures maximum focus and protection. Bell GT6 ULTRA SA2025 Carbon Fiber Helmet Key Features FIA 8859-2024 and Snell SA2025 approved Equipped with Bell Racing SmartLock Mechanism Lightweight carbon-composite shell with gloss finish Wide eye port for superior visibility in closed-cockpit racing Multi-density liner for maximum energy absorption and impact performance Direct-flow chin and extraction vents for excellent ventilation Compatible with optional top- and side-air intakes Integrated channels for drink tube and radio system installation Optional ear cups available for improved noise insulation Interior finished in dark grey FR fabric (other colors available special order) Factory-installed HANS® anchors for head-and-neck restraint systems Compatible with Bell SE06 3mm DSAF shield system Includes tear-off posts and hex wrench Bell GT6 ULTRA SA2025 Carbon Fiber Helmet Size Chart   Bell GT6 ULTRA SA2025 Carbon Fiber Helmet FAQs What certifications does the Bell GT6 ULTRA have? The helmet meets both FIA 8859-2024 and Snell SA2025 standards, making it approved for use in major series worldwide. Can I connect a cooling system to this helmet? Yes, the GT6 ULTRA can be paired with optional top- and side-air intakes and external cooling systems for endurance use. What comes in the box? The package includes the helmet, a clear SE06 shield (installed), tear-off posts, a hex wrench, and a Bell drawstring helmet sack. Is this helmet compatible with HANS devices? Yes, it comes with factory-installed M6 threaded HANS anchors ready for use with your device. Lightweight, strong, and engineered for closed-cockpit racing, the Bell GT6 ULTRA FIA 8859-2024/SA2025 carbon fiber helmet is a trusted choice for competitive drivers. Order today and upgrade your racing safety with one of Bell’s finest designs.

Stilo ST6 KRT Composite Karting Helmet The Stilo ST6 KRT Carbon Karting Helmet is engineered for competitive adult kart racers who demand lightweight performance, exceptional visibility, and professional-grade protection. Featuring a premium carbon fiber shell, the ST6 KRT Carbon combines reduced weight with advanced impact protection to help drivers stay comfortable and focused throughout demanding racing sessions. Developed specifically for karting, the ST6 KRT Carbon incorporates an expanded eyeport for improved peripheral and downward visibility, allowing drivers to better anticipate passing opportunities, identify apexes, and maintain awareness of surrounding competitors. Its aerodynamic shell design and improved cheek support provide a stable, secure fit during high-intensity racing. Advanced ventilation channels and top air inlets help manage heat and moisture inside the helmet, while Stilo's refined sliding visor mechanism delivers smooth, consistent operation. With its exposed carbon fiber finish and race-focused construction, the ST6 KRT Carbon offers a premium combination of comfort, protection, and performance. Stilo ST6 KRT Carbon Karting Helmet Features Premium Carbon Fiber Shell: Lightweight carbon construction provides excellent structural strength and energy management while reducing overall helmet weight. Snell K2025 Certification: Meets the latest Snell K2025 karting helmet safety standard. Expanded Eyeport: Improved peripheral and downward visibility enhances track awareness and driver confidence. Advanced Ventilation: Integrated top ventilation openings help reduce heat and moisture buildup during demanding racing conditions. Improved Cheek Stability: Redesigned cheek padding provides a secure, comfortable fit with reduced helmet movement. Sliding Visor Mechanism: Smooth-action visor system allows convenient opening and closing. Multiple Shell Sizes: Three shell sizes optimize overall helmet dimensions and weight across the available size range. Premium Carbon Finish: Exposed carbon fiber construction delivers a distinctive professional racing appearance. Karting-Specific Design: Purpose-built for competitive kart racers aged 15 and older. Why Choose the Stilo ST6 KRT Carbon? The ST6 KRT Carbon is designed for drivers who want the benefits of Stilo's latest karting helmet technology with the weight advantages of carbon fiber construction. Compared with traditional composite shell designs, its carbon construction helps reduce helmet mass without compromising its race-focused protective design. The improved downward field of vision is especially valuable in karting, where precise positioning and quick reactions are essential. Combined with redesigned interior padding and improved ventilation, the ST6 KRT Carbon is an excellent choice for sprint karting, endurance competition, and serious recreational racing. Stilo ST6 KRT Carbon Helmet Specifications Manufacturer: Stilo Model: ST6 KRT Carbon Helmet Type: Full-Face Karting Helmet Shell Material: Carbon Fiber Finish: Exposed Carbon Fiber Snell Certification: K2025 Shell Configurations: Three Shell Sizes Available Helmet Sizes: XS through 3XL Visor System: Sliding Visor Mechanism Ventilation: Integrated Top Ventilation Recommended Application: Adult Competitive Kart Racing Stilo ST6 KRT Carbon Helmet Sizing Chart The Stilo ST6 KRT Carbon is available in sizes XS through 3XL. Proper sizing is essential for both safety and comfort. Measure your head circumference around the widest portion of your head, approximately one inch above your eyebrows, and compare the measurement with Stilo's official sizing recommendations before selecting your helmet. The ST6 KRT series uses three different shell sizes to optimize fit and weight across its available size range. Frequently Asked Questions What is the difference between the Stilo ST6 KRT Carbon and Composite helmets? The primary difference is shell construction. The KRT Carbon features a carbon fiber shell designed to reduce overall weight, while the KRT Composite uses a multi-layer composite construction. Both share the ST6 karting platform and its visibility, ventilation, and comfort-focused features. Is the Stilo ST6 KRT Carbon Snell K2025 certified? Yes. The ST6 KRT Carbon meets the Snell K2025 karting helmet standard. Does the ST6 KRT Carbon have improved visibility? Yes. The redesigned eyeport improves peripheral and downward visibility compared with the previous ST5 platform, helping drivers maintain awareness of the track and surrounding competitors. Is the Stilo ST6 KRT Carbon suitable for endurance kart racing? Yes. Its lightweight carbon fiber construction, improved ventilation, and secure interior fit make it an excellent option for extended racing sessions. Does the helmet include a visor? Yes. The ST6 KRT Carbon comes with a clear visor and an integrated sliding visor mechanism. Can the Stilo ST6 KRT Carbon be used for automobile racing? The ST6 KRT Carbon is specifically designed for karting. Drivers competing in automobile racing should select a helmet that meets the certification requirements of their particular racing organization.

OMP HTE-R BMW Racing Seat with M Rain Fabric The OMP HTE-R is a head restraint racing seat designed to deliver modern safety and exceptional support while keeping costs under control. Its fiberglass shell and iconic M Rain fabric give dedicated track drivers a secure and comfortable seating position for long sessions behind the wheel. Advanced support with iconic M Rain styling Features Gel-coated fiberglass shell for strength and durability Iconic M Rain fabric pattern available exclusively in the standard size Large shoulder harness openings to fit a range of driver heights High side bolsters provide improved lateral leg stability and impact protection Removable back, base, and leg cushions allow custom comfort and fit Compatible with HANS devices for added head and neck safety Fits most drivers up to a 36 inch waist Homologation FIA 8859-1999 OMP HTE-R BMW Racing Seat with M Rain Fabric FAQs Is the OMP HTE-R suitable for taller drivers? The seat features large shoulder harness slots designed to accommodate various torso heights, offering better alignment for taller drivers. Does the M Rain fabric change the fit or size? No, the M Rain version is available only in the standard size but does not alter the dimensions or seating position of the HTE-R. Can the cushions be removed for customization? Yes, the back, base, and leg cushions are all removable to fine tune comfort and support based on driver preference. Is this seat compatible with side mounts? The HTE-R is designed for side mounting and works with most standard side mount brackets for installation in race vehicles. What type of harness works best with this seat? Five and six point racing harnesses are recommended and pair well with the large harness openings and head restraint structure. This seat is a strong choice for drivers building a focused track or race car and looking for FIA rated protection with distinctive styling.

Alpinestars Tempest V3 Waterproof Karting Gloves The Alpinestars Tempest V3 Waterproof Karting Gloves are purpose-built for racers who compete through rain, cold temperatures, and challenging track conditions. Their three-layer construction combines a windproof ripstop outer shell, waterproof membrane, and soft microfleece lining to help keep the hands warm, dry, and responsive. A strategically printed silicone palm provides dependable steering-wheel traction when moisture makes grip more difficult. Pre-curved fingers, an ergonomically shaped palm, and a secure gauntlet cuff give the Tempest V3 the fit and control needed for serious wet-weather karting. Three-Layer Wet-Weather Construction The Tempest V3 uses a specialized three-layer structure designed around cold and rainy racing conditions. The durable outer shell helps block wind, the internal membrane resists water penetration, and the fleece lining provides insulation against low temperatures. This layered construction offers significantly more weather protection than a conventional lightweight kart glove while remaining flexible enough for precise steering inputs. Waterproof Membrane with Internal Seams An integrated waterproof membrane helps protect the hands against rain, standing water, and spray from other karts. Internal seam construction supports the weather-resistant design by reducing exposed stitching on the outside of the glove. The Tempest V3 is intended to maintain comfort in sustained wet conditions, making it a practical option for rain races, winter testing, and unpredictable race weekends. Windproof Ripstop Outer Shell The outer shell uses a durable ripstop material that helps resist wind and everyday abrasion. Blocking cold airflow is especially important in karting because the driver’s hands remain exposed to high-speed air throughout the session. Ripstop construction also helps limit the spread of small tears, improving durability when the gloves are used regularly in demanding outdoor environments. Full Microfleece Lining A soft microfleece lining covers the interior of the glove to provide warmth and a more comfortable feel against the skin. This insulation helps maintain finger movement and steering control when low temperatures would otherwise make the hands stiff or numb. The lining is designed to provide useful warmth without the excessive thickness of a general-purpose winter glove. Silicone Palm Grip for Rain Conditions Strategically positioned silicone printing across the palm improves traction against the steering wheel in wet and slippery conditions. The grip pattern helps prevent the hands from shifting during braking, cornering, and rapid steering corrections. Because the silicone is printed directly onto the palm, it provides additional traction without creating a bulky reinforcement layer that would significantly reduce steering sensitivity. Pre-Curved Fingers and Ergonomic Palm The fingers are shaped around the natural position of the hand while gripping a kart steering wheel. This pre-curved design reduces material bunching and minimizes the effort required to maintain a secure driving position. An ergonomically shaped palm further improves fit and allows the glove to move more consistently with the driver’s hand. Straight-Cut Gauntlet Cuff The extended gauntlet cuff provides additional coverage around the wrist and helps prevent rain or cold air from entering between the glove and suit sleeve. Its straight-cut shape creates a clean overlap with compatible karting apparel. The longer cuff is particularly useful during heavy rain, where water can otherwise travel down the sleeve and into a shorter glove. 180-Degree Elasticated Wrist An elasticated section wraps around 180 degrees of the wrist at the palm side, allowing the glove opening to stretch during entry and then contract around the wrist. This design helps the glove remain securely positioned while preserving the flexibility needed for unrestricted steering movement. Adjustable Hook-and-Loop Closure An adjustable hook-and-loop strap allows the cuff to be tightened around the wrist for a secure fit. The closure helps reduce movement inside the glove and limits the entry of wind and moisture. It also makes the glove easier to adjust over different kart-suit sleeve thicknesses. FIA 8877-2022 Karting Homologation The Alpinestars Tempest V3 Waterproof Gloves are certified to the FIA 8877-2022 karting homologation standard. This makes them suitable for competitions requiring current FIA-approved karting gloves. Drivers should confirm the specific equipment regulations of their championship, sanctioning organization, or event before competition. Alpinestars Tempest V3 Waterproof Glove Features Three-layer waterproof karting-glove construction Windproof and durable ripstop outer shell Internal waterproof membrane protects against rain and moisture Full soft microfleece lining provides warmth Silicone-printed palm improves wet-weather steering grip Pre-curved fingers reduce material bunching Ergonomic palm design supports precise hand movement Internal seams support weather protection Straight-cut extended gauntlet cuff 180-degree elasticated wrist allows easy entry Adjustable hook-and-loop cuff closure Silver printed detailing FIA 8877-2022 homologated Youth version available separately Alpinestars Tempest V3 Waterproof Glove Specifications Manufacturer: Alpinestars Model: Tempest V3 Waterproof Product Type: Wet-Weather Karting Gloves Outer Shell: Windproof Ripstop Material Waterproofing: Internal Waterproof Membrane Interior: Full Microfleece Lining Palm: Silicone-Printed Wet-Weather Grip Finger Construction: Pre-Curved Seams: Internal Cuff: Straight-Cut Gauntlet Wrist: 180-Degree Elasticated Construction Closure: Adjustable Hook-and-Loop Strap Homologation: FIA 8877-2022 Why Choose the Alpinestars Tempest V3? The Tempest V3 is designed for the conditions where ordinary kart gloves become cold, soaked, and difficult to control. Its waterproof membrane and windproof outer shell protect against the weather, while the fleece lining helps retain warmth during low-temperature sessions. Unlike a general-purpose winter glove, the Tempest V3 also includes a pre-curved racing fit and silicone steering-wheel grip. This makes it a strong choice for competitive racers who need weather protection without giving up essential kart control. Alpinestars Tempest V3 Waterproof Karting Glove Size Chart Frequently Asked Questions Are the Alpinestars Tempest V3 Gloves actually waterproof or only water resistant?Alpinestars describes the Tempest V3 as a waterproof glove. Its three-layer construction includes a dedicated waterproof membrane and internal seams for protection against rain and moisture. How warm are the Tempest V3 Gloves?They include a full microfleece lining and windproof outer shell, making them substantially warmer than a standard lightweight kart glove. Their primary purpose is cold and wet-weather racing rather than warm-weather use. Will the fleece lining make the gloves feel bulky?They will feel thicker than a dry-weather racing glove because of the waterproof membrane and insulation. However, the pre-curved fingers and ergonomic palm are designed to limit bunching and preserve steering control. Should I order the same size as my regular Alpinestars kart gloves?Begin with your normal Alpinestars kart-glove size, but consider the insulated construction when choosing. The gloves should fit securely without compressing the fingers, since an overly tight fit can reduce warmth and movement. Can the Tempest V3 be worn over a thin glove liner?A very thin liner may fit if sufficient room remains, but adding one can make the glove too tight and reduce dexterity. Select sizing based on the intended setup rather than assuming a liner will fit. Does the silicone grip work on a wet steering wheel?Yes. The strategically positioned silicone palm print is specifically intended to improve grip and control in wet-weather track conditions. Will water enter through the cuff?The extended gauntlet, elasticated wrist, and adjustable strap help limit water entry. For the best protection, position the glove cuff and kart-suit sleeve so rain cannot run directly inside the opening. Are the Tempest V3 Gloves suitable for snow or general winter use?They are designed specifically for wet-weather karting. Although they provide wind and water protection, they are not intended to replace heavily insulated snow or outdoor work gloves. Can these gloves be used during dry races?Yes, particularly in cold conditions. In warm or dry weather, a lighter and more breathable karting glove will usually be more comfortable. Are youth sizes the same product as the adult version?Alpinestars offers a separate youth model called the Tempest V3 Waterproof S. It uses the same core wet-weather construction but is sized specifically for younger drivers. Are these gloves approved for FIA karting competition?Yes. The Tempest V3 is certified to the FIA 8877-2022 homologation standard. Racers should still confirm their championship’s current equipment requirements. How should waterproof karting gloves be dried after a wet race?Allow the gloves to air dry naturally in a ventilated location. Do not place them on a heater, use a clothes dryer, or expose them to direct high heat, as this may damage the membrane, lining, or grip printing. How should the Tempest V3 Gloves be cleaned?Hand wash them gently in cold water with mild detergent and allow them to air dry away from direct heat or sunlight. Avoid bleach and aggressive cleaning chemicals.

Bell HP77 Gabriel Bortoleto 2025 Mini Bell Helmet Replica 1:2 The Bell HP77 Gabriel Bortoleto 2025 Mini Helmet is a stunning 1:2 scale replica of the helmet worn by Bortoleto during the 2025 Formula One season. Handcrafted by Bell Racing Helmets in the same factory as the full-size HP77 race helmets, this collector’s piece perfectly captures the precision, design, and flair of Kick Sauber Formula One team. Precision Replica of the 2025 Gabriel Bortoleto Helmet Each Bell 1:2 scale mini helmet is crafted using premium materials, mirroring the shell structure, visor design, and internal padding of the full-scale original. Produced under the guidance of Bell’s top engineers, these replicas showcase the same attention to aerodynamics, safety design, and finish that define the real HP77 helmet. Features Scale: 1:2 Crafted by Bell Racing Helmets for Kick Sauber F1 Shell Material: 77% Fibre Reinforced Plastic Interior: 15% Cotton Fabric + Foam Hardware: 8% Metal Components Weight: 0.5 kg Dimensions: 180mm (W) x 140mm (H) x 135mm (D) Bell HP77 Gabriel Bortoleto 2025 Mini Bell Helmet FAQs: Is this the same design Gabriel Bortoleto wore during the 2025 F1 season? Yes, this mini helmet replicates the exact 2025 season design worn by Gabriel Bortoleto while driving for Kick Sauber. Is the Bell HP77 Mini Helmet officially licensed? Absolutely. It’s officially licensed by the Kick Sauber Formula One Team and produced by Bell Racing Helmets. Can the visor be opened or adjusted? The visor is fixed for display purposes, designed to maintain structural integrity and an authentic look. Does the helmet come with a display case or box? Yes, each helmet includes a custom-designed collector’s box for safe storage and presentation. What materials are used to make the helmet? The helmet combines fibre-reinforced plastic, cotton fabric with foam interior, and metal components—mirroring the composition of the full-scale HP77. Celebrate the speed, precision, and craftsmanship of Formula One with this Bell HP77 Gabriel Bortoleto 2025 Mini Helmet Replica.

AiM Sports MyChron External Power Cable If you're not powering your AiM MyChron by connecting it to your kart, you'll need this external power cable in order to provide enough juice for your MyChron. Installation is quick and easy. Two meters (6.6 feet) in length. Note: this cables typically takes 3 to 5 business days to ship.

CMS Performance Sub Strap Mount for Corvette C6 This Mount Fits All Variants of the Following Cars: Chevrolet Corvette C6 (All) The Best Way to Mount Harness Lap and Sub Belts in Your C6 Corvette The CMS Performance Sub Strap Mount is designed to be installed and used with your factory seats, giving you strong, secure mounting points for racing harness sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap Mount provides an extremely strong structure to which you can wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap Mount Details Manufacturer: CMS Performance Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Sub Strap Mount for Corvette C7 This Mount Fits All Variants of the Following Cars: Chevrolet Corvette C7 (All) The Best Way to Mount Harness Lap and Sub Belts in Your C7 Corvette The CMS Performance Sub Strap Mount is designed to be installed and used with your factory seats, giving you strong, secure mounting points for racing harness sub-belts without any drilling or cutting. The CMS Performance mount bolts to the rear mounting points of the driver and/or passenger seat, beneath the seat slider tracks, using your original mounting bolts. CNC machined from 1/4-inch solid carbon steel and fully 360º TIG welded, the CMS Performance Sub Strap Mount provides an extremely strong structure to which you can wrap your sub strap(s). Powder coated a rich, durable satin black, the CMS Performance Sub Strap Mount is nearly invisible once installed. It does not interfere with seat movement fore/aft or up/down in any way, installs in minutes, and can be removed just as easily without leaving a trace. The CMS Performance Sub Strap Mount is designed, manufactured, and powder-coated entirely in-house in the USA. CMS Performance Sub Strap Mount Details Manufacturer: CMS Performance Construction: TIG-welded solid carbon steel Finish: satin black powder-coat Fitment: fits driver or passenger seat Allows full fore/aft and up/down seat adjustment Does not interfere with OEM seat belts or airbag hardware

CMS Performance Ultimate Race Seat Mounting Kit This Kit Fits the Following Vehicles: BMW G82 M4 (2021+) Introducing Our Complete Race Seat Mounting Kit: The Ultimate Upgrade for Motorsports Enthusiasts! Are you a racing or track-day aficionado looking to upgrade your on-track safety and performance? Look no further than the CMS Performance Ultimate Racing Seat Mounting Kit. One of the very best upgrades you can make for driving your BMW on the race track is adding a dedicated racing seat. CMS Performance designed this kit to give you a complete solution to installing your choice of seat in your BMW. No mixing-and-matching, hunting for parts and wondering whether it'll all work together. The CMS Performance Ultimate Race Seat Mounting Kit has everything you need! Precision Engineering for BMW Excellence The CMS Performance Ultimate Race Seat Mounting Kit is precision- engineered, tailor-made to fit a variety of race seats safely and securely in your BMW. Crafted with meticulous attention to detail from 3/16" carbon steel, this kit draws on our many years of experience with track-prepped BMWs. Let CMS Performance help you unlock the full potential of your high-performance BMW on the race track. Custom Powder Coat to Match Your BMW The CMS Performance Ultimate Race Seat Mounting Kit comes standard in a durable satin black finish powder coat. CMS Performance can also custom powder-coat your kit in just about any BMW OEM paint color you like. Simply choose "Custom Color" in the dropdown above and specify the BMW color you want in your Order Notes at check-out. See Assembly Instructions Here CMS Performance Ultimate Race Seat Mounting Kit Includes: Mounting base w/ integrated sub strap bar (bolts securely to factory BMW seat mounting holes) Two steel side-mount race seat brackets All necessary hardware (Grade 8) Optional: high-performance race seat slider Detailed installation instructions Key Features of This Kit: Race-Ready Compatibility: Designed to seamlessly integrate with a wide range of racing seats from Sparco, OMP, Racetech and Sabelt. Our mounting kit ensures a perfect fit on the driver and/or passenger side of your BMW. CMS Performance has you covered. Fully Integrated: The CMS Performance kit includes everything you need to install a racing seat in your BMW. No mixing-and-matching, so you can spend less time installing and more time racing. Lightweight Durability: Constructed from premium materials, our kit prioritizes strength without compromising on weight. The integrated design puts a premium on maintaining structural integrity. Customization Options: Tailor your installation to perfection with multiple options, including racing sliders and custom powder-coat colors. Enhanced Safety: Safety is paramount in motorsports, and our kit doesn't cut corners. It's designed to meet or exceed industry safety standards, keeping you protected during the most demanding races. Quick and Easy Installation: The CMS Performance Ultimate Race Seat Mounting Kit is engineered for straightforward installation and precise fitment. Not included: CMS Performance roll bar and race seats are available separately. Seat mounting kit is shown with optional Recaro seat slider.

Bell 1:2 Scale F1 Mini Helmet Esteban Ocon Haas 2025 Formula 1 Season Celebrate the exhilarating journey of Esteban Ocon with the Bell 1:2 Scale F1 Mini Helmet, crafted for the 2025 Formula 1 season with Haas F1 Team. This meticulously designed replica captures the essence of Ocon’s 2025 helmet, reflecting his dynamic new colors and new chapter with the American team. Authentic Mini Helmet Collectible This stunning F1 mini helmet embodies Esteban Ocon’s fierce racing spirit, with a design that mirrors the combative energy he brings to every Grand Prix. Adorned with a striking Eiffel Tower graphic on top, it proudly showcases his French heritage, making it a bold statement piece for fans and collectors alike. Key Features Authentic Design: A precise 1:2 scale replica of Esteban Ocon’s 2025 Haas F1 Team helmet, capturing every detail of the original with stunning accuracy. Premium Craftsmanship: Built with high-quality materials to ensure durability and a premium display presence. Compact Display Size: Perfect for shelves, desks, or display cases as part of any F1 collection. Collector’s Packaging: Comes in a stylish box for gifting or preservation. Exclusive Collectible: A limited-edition piece celebrating Ocon’s move to Haas and his partnership with rookie Oliver Bearman. Perfect Gift for F1 Fans: Ideal for supporters of Esteban Ocon, Haas F1 Team, or Formula 1 history. Technical Details Half scale of the Bell HP77 helmet with customized design, replicating Esteban Ocon's 2025 helmet painting scheme. These F1 mini helmets are produced by Bell using the same manufacturing process as the full-sized helmets used on track, with similar materials and no compromise on quality or authenticity. Materials: 77% Fiber Reinforced Plastic (recyclable), 15% Cotton Fabric and Foam, 8% Hardware Helmet Dimensions (in): L 6.49 x W 5.07 x H 5.19 Helmet Dimensions (cm): L 16.5 x W 12.9 x H 13.2 Box Dimensions: L 180 x W 135 x H 140 mm Gross Weight: 13 oz / 355 g (including packaging) Manufacturer Part Number: 4100411 For display only. This mini helmet is designed exclusively as a collectible and is not suitable for use. FAQs: Bell 1:2 Scale F1 Mini Helmet Esteban Ocon / Haas - 2025 F1 Season Is this an officially licensed Bell product? Yes. This mini helmet is manufactured by Bell, using the same techniques and materials as their full-size racing helmets. Can this mini helmet be worn? No. It is a collectible display piece and not intended for wear or track use. Is this a limited edition? Yes. This helmet celebrates Ocon’s 2025 season with Haas and is produced in limited quantities. What scale is this mini helmet? It’s a 1:2 scale replica of Esteban Ocon’s Bell HP77 helmet used in the 2025 Formula 1 season. Secure your limited-edition Esteban Ocon 1:2 Scale Mini Helmet today and celebrate his exciting new chapter with Haas F1 Team.