Brake Pads

Cobalt Corvette C7 Z07 (Z07 Carbon Ceramic Brakes w/ Iron Disc) Brake Pads (Front)

7740.08.16.44 (08 Compound) One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. COMMON CALIPER FITMENT: Radical SR1

Pagid Racing Brake Pad Shape No. 1295 Fits the Following Vehicles: Make Model Build (Year) Front Rear BMW 330i [E46] 2000 - 05 X BMW M3 [E36] 3.0 & 3.2 1992 - 99 X BMW M3 [E46] & M3 CSL 2000 - 07 X BMW M5 [E34] 1988 - 97 X BMW Z3 M Coupe [E36] 1998 - 2003 X BMW Z3 M Roadster 3.2i 1997 - 2003 X BMW Z4 M Coupe 2006 - 09 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 2E Compound: RST 2E is perfect as a front axle application in mid-endurance GT and touring car racing, in the range of 2-6h race duration. Front and rear axle application on rally race cars. RST 2 and RST 2E are semi-metallic resin bonded materials containing steel fibers. Cold friction and initial bite make these materials most appropriate for rallying and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Pagid Racing Brake Pad Shape No. 1204 Fits the Following Vehicles: Make Model Build (Year) Front Rear Porsche 928 S & S4 & GT 1985 - 95 X Porsche 944 2.5 Turbo 1987 - 91 X Porsche 964 3.3 Turbo & Turbo S 1988 - 91 X Porsche 964 3.6 Carrera RS 1991 - 93 X Porsche 968 3.0 Coupe Sport 1991 - 95 X Porsche 993 3.6 Carrera & C4 1993 - 97 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. RS 14 Compound: The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. RS 44 Compound: The Pagid RS 44 (Orange) is a carbon-based, highly controllable pad with a progressive friction curve. It has a medium initial bite and good low temperature response. A very versatile pad for use on both front and rear axles, or in conjunction with RS14 on the front axle in FWD cars. Particularly popular in Porsche club racing, fitted as OEM on the Porsche 993 RS and GT2.

Pagid Racing Brake Pad Shape No. 1203 Fits the Following Vehicles: Make Model Build (Year) Front Rear Ferrari 348 GTB. GTS, Spider 89 - 94 X X Ferrari 355 Berlinetta. GTS 94 - 99 X X Ferrari 456 GT 94 - 96 X Ferrari 512 Testarossa 92 - 96 X Ferrari 575M Maranello 02 - 06 X Ferrari F512M & 550 X Maserati Spyder 4.2 & Coupe 3.2 02 - 07 X Porsche 911 3.3 SC Turbo / Turbo S 77 - 90 X X Porsche 928 5.4 GTS 32V 91 - 95 X Porsche 928 S & S4 & GT 85 - 95 X Porsche 944 2.5 Turbo 87 - 91 X Porsche 944 2.7 & 3.0 S2 88 - 91 X X Porsche 964 3.3 Turbo & Turbo S 88 - 91 X Porsche 964 3.3/3.6 Turbo & Turbo S 91 - 93 X Porsche 964 3.6 C4 88 - 94 X X Porsche 964 3.6 Carrera RS 91 - 93 X Porsche 964 C2 3.6 91 - 94 X X Porsche 968 3.0 Coupe 91 - 95 X X Porsche 968 3.0 Coupe Sport 91 - 95 X Porsche 968 3.0 Coupe Turbo S 93 - 95 X Porsche 993 3.6 Carrera & C4 93 - 97 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RS 14 Compound: The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. RSL 19 Compound: Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. RS 44 Compound: The Pagid RS 44 (Orange) is a carbon-based, highly controllable pad with a progressive friction curve. It has a medium initial bite and good low temperature response. A very versatile pad for use on both front and rear axles, or in conjunction with RS14 on the front axle in FWD cars. Particularly popular in Porsche club racing, fitted as OEM on the Porsche 993 RS and GT2. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid RST 4 Compound: RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typically use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing (tarmac and gravel) and for front engine cars. Also used in NASCAR on long ovals.

PFC 11 COMPOUND A new generation sprint and medium distance friction: the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation. PFC 08 COMPOUND One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. FITMENT (Iron Rotors Only) Most Porsche 986, 987, 996, and 997 Front Calipers

PFC 01 COMPOUND The Performance Friction PFC 01 compound is the standard by which all other racing brake pads are judged. The PFC 01 has a very high initial bite and torque, with very little temperature-induced torque rise. At the end of braking, less torque scatter exists for improved modulation and excellent release. With its low-wear characteristics and excellent disc conditioning properties, it's no wonder the PFC 01 compound has won more World and National Championships than any other brake pad on the market! COMMON CALIPER FITMENTS: Manufacturer: Model: Alcon H-Type AP Racing CP4567   CP5040-10/11/12/13S4   CP5100   CP5108   CP6760

Ferodo FCP779 Brake Pad Set BMW Fitment  BMW E36 M3 Front calipers DS3.12Released in 2019, the DS3.12 represents the latest advancement in Ferodo's renowned DS line. In the realm of sports cars, the demands placed on brake systems have intensified, with increased horsepower, sophisticated aerodynamics, higher curb weights, and stickier tires. Addressing these demands head-on, the Ferodo DS3.12 is a modern pad compound meticulously designed to cater explicitly to these challenges. Extensive testing has revealed that, among all pad compounds from various manufacturers, the DS3.12 exhibits the most consistent torque curve across a wide temperature range. Consequently, whether you're tackling turns, driving on any track or completing lap after lap, the brake pedal response remains remarkably consistent, offering exceptional reliability and repeatability. With a higher mu (friction coefficient) compared to Ferodo's other compounds, the DS3.12 requires less leg pressure to initiate the desired braking performance. Furthermore, it exhibits superior fade resistance, ensuring optimal performance at any temperature your brakes may encounter. Dyno testing has demonstrated that the DS3.12 maintains superior wear rates while being gentle on the discs. As a result, we anticipate the DS3.12 will establish itself as the benchmark against which other race compounds are measured.DS1.11The DS1.11, in contrast to the DS3.12, possesses a lower mu at all temperatures, making it a moderate mu pad in the realm of endurance racing compounds. It necessitates greater pedal force compared to the DS3.12 and exhibits a slight decline in torque as temperatures rise. Consequently, as you push deeper into a turn with increasing heat, you may find yourself applying more pressure on the brake pedal to achieve the same response—a sensation preferred by some drivers. Certain drivers find the DS1.11 to be more manageable when using street tires, particularly as it is less prone to activating the ABS system. While the DS1.11 offers a longer lifespan compared to many other pad compounds on the market, it falls slightly short of the longevity of the DS3.12. When maintained with a proper pad transfer layer, it remains gentle on discs even at elevated track temperatures. While the DS1.11 boasts excellent maximum temperature tolerance and fade resistance, it does not quite reach the same levels as the DS3.12. To date, we have not received reports of fading issues with the DS1.11, and most individuals differentiate between the DS1.11 and DS3.12 based on their respective tactile experiences.DS2500While we always recommend using dedicated race pads for track use, the DS2500 stands out as one of the premier hybrid street/track pads available. It combines the advantages of a track pad, such as a moderately high bite and solid fade resistance, with the comparatively lower levels of dust and noise typically associated with street pads. As a street pad, it may produce some squealing noise in specific vehicle applications, particularly when driven aggressively. For individuals who engage in spirited street driving, canyon runs, autocross, and occasional light track duty on street tires, the DS2500 is hard to surpass. DS3000 The predecessor to DS1.11, DS3000 offers high initial bite with excellent feel and release. Popular among rally teams, DS3000 has a relatively low cold temperature threshold while still offering high temp stability for tarmac. DS3000 is very easy on discs at the expense of pad wear. Ferodo FCP779 Brake Pad Front Axle Fitment: 1995 BMW E36 M3 1996 BMW E36 M3 1997 BMW E36 M3 1998 BMW E36 M3 1999 BMW E36 M3 1998 BMW Z3 M Coupe/ Roadster 1999 BMW Z3 M Coupe/ Roadster 2000 BMW Z3 M Coupe/ Roadster 2001 BMW Z3 M Coupe/ Roadster 2002 BMW Z3 M Coupe/ Roadster

Ferodo FCP411 Brake Pad Set BMW Fitment  BMW M235, M2, M3 and M4 Front calipers DS3.12Released in 2019, the DS3.12 represents the latest advancement in Ferodo's renowned DS line. In the realm of sports cars, the demands placed on brake systems have intensified, with increased horsepower, sophisticated aerodynamics, higher curb weights, and stickier tires. Addressing these demands head-on, the Ferodo DS3.12 is a modern pad compound meticulously designed to cater explicitly to these challenges. Extensive testing has revealed that, among all pad compounds from various manufacturers, the DS3.12 exhibits the most consistent torque curve across a wide temperature range. Consequently, whether you're tackling turns, driving on any track or completing lap after lap, the brake pedal response remains remarkably consistent, offering exceptional reliability and repeatability. With a higher mu (friction coefficient) compared to Ferodo's other compounds, the DS3.12 requires less leg pressure to initiate the desired braking performance. Furthermore, it exhibits superior fade resistance, ensuring optimal performance at any temperature your brakes may encounter. Dyno testing has demonstrated that the DS3.12 maintains superior wear rates while being gentle on the discs. As a result, we anticipate the DS3.12 will establish itself as the benchmark against which other race compounds are measured.DS1.11The DS1.11, in contrast to the DS3.12, possesses a lower mu at all temperatures, making it a moderate mu pad in the realm of endurance racing compounds. It necessitates greater pedal force compared to the DS3.12 and exhibits a slight decline in torque as temperatures rise. Consequently, as you push deeper into a turn with increasing heat, you may find yourself applying more pressure on the brake pedal to achieve the same response—a sensation preferred by some drivers. Certain drivers find the DS1.11 to be more manageable when using street tires, particularly as it is less prone to activating the ABS system. While the DS1.11 offers a longer lifespan compared to many other pad compounds on the market, it falls slightly short of the longevity of the DS3.12. When maintained with a proper pad transfer layer, it remains gentle on discs even at elevated track temperatures. While the DS1.11 boasts excellent maximum temperature tolerance and fade resistance, it does not quite reach the same levels as the DS3.12. To date, we have not received reports of fading issues with the DS1.11, and most individuals differentiate between the DS1.11 and DS3.12 based on their respective tactile experiences.DS2500While we always recommend using dedicated race pads for track use, the DS2500 stands out as one of the premier hybrid street/track pads available. It combines the advantages of a track pad, such as a moderately high bite and solid fade resistance, with the comparatively lower levels of dust and noise typically associated with street pads. As a street pad, it may produce some squealing noise in specific vehicle applications, particularly when driven aggressively. For individuals who engage in spirited street driving, canyon runs, autocross, and occasional light track duty on street tires, the DS2500 is hard to surpass. DSUNO The Ferodo DSUNO is a predictable mid-endurance compound designed for repeatable stopping, lap after lap. Featuring one of the flattest torque curves of the Ferodo brake pad line, the Ferodo DSUNO is a mid-distance endurance compound with an average coefficient of friction of 0.48µ across the workable range of 392 to 1382 F.The cold friction profile of the Ferodo DSUNO is low, proper bedding and warm-up is recommended for optimum performance all the way to its maximum 1382 F limit. The Ferodo DSUNO is a popular choice in brake pads for many track drivers and endurance racers.However, when employed on the track by cars weighing over 3,000 lbs., featuring high horsepower and R Compound tires, the DS2500 tends to exhibit significantly higher wear rates compared to Ferodo Racing's other compounds. If extended wear rates are a priority under these conditions, Essex recommends considering the Ferodo DS1.11 or DS3.12 as alternatives. Ferodo FCP4611 Brake Pad Front Axle Fitment: 2012 BMW 335 Sedan F30 Exc M Sport Brakes 2013 BMW 335 Sedan F30 Exc M Sport Brakes 2012 BMW 335 Sedan F30 M Sport Brakes 2015 BMW M3 F80 Iron Discs 2015 BMW M4 F82 Iron Discs 2014 BMW M3 F80 Iron Discs 2014 BMW M4 F82 Iron Discs 2016 BMW M235 F22 2015 BMW M235 F22 2016 BMW M3 F80 Iron Discs 2016 BMW M4 F82 Iron Discs 2016 BMW M2 All 2017 BMW M2 All 2017 BMW M3 F80 Iron Discs 2017 BMW M4 F82 Iron Discs 2018 BMW M2 F87 All 2018 BMW M3 F80 Iron Discs 2018 BMW M4 F82 Iron Discs

Carbotech CT1648 BMW F87 M2 competition Front Brake Pad Set Carbotech rear brake pads for BMW M2 Competition F87 in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. Carbotech CT1648 BMW M2 Rear Brake Pad Set Details: Manufacturer: Carbotech Manufacturer Part Number: CT1648 Carbotech Brake Compounds Carbotech 1521 The Carbotech 1521 is our high-performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800°F (426°C+). 1521 is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech 1521 is NOT recommended for ANY track use. Carbotecha AX6 The AX6 is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6 for street driving as well, even though Carbotech doesn't recommend street driving with AX6 due to possible elevated levels of dust and noise. AX6 is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotech XP8 is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech does NOT recommended XP8 as a daily driven street pad due to elevated levels of dust and noise. Carbotech XP8 is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotech unleashed the XP10 to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10 has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10 still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech compounds so successful. Carbotech XP10 is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XP series compound with an excellent initial bite, torque and fade resistance over and above the XP10 compound. XP12 has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12 has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12 is more rotor aggressive than XP10, but compared to the competition the XP12 is still very rotor friendly. XP12 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP20 The latest iteration of the highly successful XP series of compounds. XP20 is a step up from the highly successful XP16 compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20 is another major step in progression of the highly successful XP series line of compounds from Carbotech. XP20 has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotech XP20 maintains our tradition of having the outstanding release and modulation that has made all other Carbotech compounds so successful. Carbotech XP20 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP24 XP24 is the pinnacle compound of the extremely successful XP Series of compounds engineered by Carbotech . This compound is based on the same fundamentals that exist in all other Carbotech formulations. XP24 has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotech XP24 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech RP2 The RP2 compound was engineered for endurance racing based on our highly successful XP Series formulations. RP2 has strong initial bite, a little less modulation than our XP12, but still maintains the rotor friendliness of our XP series compounds. RP2 has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2 is as rotor friendly as our XP series compounds. Carbotech RP2 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.

Ferodo FRP3097H Brake Pads (fits AP Racing CP8350 Calipers with D42 radial depth) Replacement pads for AP Racing by Essex Brake Kits using CP8350 calipers and D42 radial depth discs. Dimensions= 133.2 x 61 x 20.4 mm, D42 DS3.12 Released in 2019, the DS3.12 is the latest evolution in Ferodo's incredible DS line. Sports cars today have more of everything: more horsepower, more sophisticated aero, higher curb weights, and stickier tires. These attributes place serious demands on a vehicle's brake system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly to handle those demands. Out of all the pad compounds we've ever tested, from all manufacturers, the DS3.12 shows the flattest torque curve across the broadest temperature range. That means that on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu than Ferodo's other compounds, so not as much leg pressure is required to initiate the desired response. It is also unfadable, showing no drop in performance at any temp your brakes will ever see. In dyno testing, the DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to the discs. We believe the DS3.12 will become the gold standard to which other race compounds will be compared. DS1.11 The DS1.11 has a lower mu than the DS3.12 at all temperatures and can be characterized as a moderate mu pad vs. other endurance racing compounds. They require more pedal force than the DS3.12, and they have a slightly declining torque curve as temperatures rise. As they get hotter and you dive deeper into a turn, you may feel like you need to push a little harder on the brake pedal to elicit the same response (which is a feel many drivers actually prefer). Some drivers feel that the DS1.11 is more controllable on street tires than DS3.12 since ABS cannot be activated as easily. It will last a fairly long time vs. many other pad compounds on the market but does not last quite as long as the DS3.12. They are very gentle on discs at track temperatures when a proper pad transfer layer is maintained. The DS1.11 also has an outstanding max temp and fade resistance, just not quite as high as 3.12. We're not aware of anyone who has faded them, and most people differentiate between the DS1.11 and DS3.12 based on feel. DS2500 Although we always recommend using a dedicated race pad for the track, the DS2500 is one of the best hybrid street/track pads on the market. It features the moderately high bite and solid fade resistance of a track pad, with the relatively low dust and noise levels of a street pad. When used as a street pad, it can produce some squeal on certain vehicle platforms. If you drive aggressively on the street, do some canyon runs, autocross, and maybe some light track duty on street tires, the DS2500 is tough to beat.When used on track by 3,000+ lbs. cars with high horsepower and R Compound tires, DS2500 pad wear rates tend to be considerably higher vs. Ferodo Racing's other compounds. If you're looking for extended wear rates under those conditions, Essex would recommend the Ferodo DS1.11 or DS3.12.

Carbotech CT1382 Nissan GT-R Brake Pads for Brembo Calipers Carbotech Race and Track Pads CT1382 fits the Nissan R35 GT-R measuring 19mm thick and available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds Carbotech CT1382 Details: Manufacturer: Carbotech Manufacturer part number: CT1382 Most popular track combination: R10 Front, R8 Rear Hawk cross reference: HB650._730 Material thickness of pad of backing plate and pad material: .730" Material thickness of pad of backing plate and pad material: 19mm Carbotech Brake Compounds Carbotech 1521 The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800F (426C+). 1521 is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech 1521 is NOT recommended for ANY track use. Carbotech AX6 The AX6 is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50F to 1000F + (10C to 537C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6 for street driving as well, even though Carbotech doesn't recommend street driving with AX6 due to possible elevated levels of dust and noise. AX6 is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200F-1250F+ (93C to 676C+). Carbotech XP8 is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech does NOT recommended XP8 as a daily driven street pad due to elevated levels of dust and noise. Carbotech XP8 is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotech unleashed the XP10 to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10 has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10 still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech compounds so successful. Carbotech XP10 is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XP series compound with an excellent initial bite, torque and fade resistance over and above the XP10 compound. XP12 has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12 has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12 is more rotor aggressive than XP10, but compared to the competition the XP12 is still very rotor friendly. XP12 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT1382 Brake Pad Fitment: 2018 Nissan GT-R Track Edition 3.8L 2018 Nissan GT-R Pure 3.8L 2018 Nissan GT-R Premium 3.8L 2018 Nissan GT-R Nismo 3.8L 2017 Nissan GT-R Premium 3.8L 2017 Nissan GT-R Nismo 3.8L 2016 Nissan GT-R Premium 3.8L 2016 Nissan GT-R Nismo 3.8L 2016 Nissan GT-R Black Edition 3.8L 2015 Nissan GT-R Track Edition 3.8L 2015 Nissan GT-R Premium 3.8L 2015 Nissan GT-R Nismo 3.8L 2015 Nissan GT-R Black Edition 3.8L 2014 Nissan GT-R Track Edition 3.8L 2014 Nissan GT-R Premium 3.8L 2014 Nissan GT-R Black Edition 3.8L 2014 Nissan GT-R 2013 Nissan GT-R Premium 3.8L 2013 Nissan GT-R Black Edition 3.8L 2013 Nissan GT-R 2012 Nissan GT-R Premium 3.8L 2012 Nissan GT-R Black Edition 3.8L 2012 Nissan GT-R 2011 Nissan GT-R Premium 3.8L 2011 Nissan GT-R 2010 Nissan GT-R Premium 3.8L 2010 Nissan GT-R Base 3.8L 2010 Nissan GT-R 2009 Nissan GT-R Premium 3.8L 2009 Nissan GT-R Base 3.8L 2009 Nissan GT-R

Carbotech CT2043 Alfa Romeo Rear Brake Pad Set Carbotech rear brake pads for Alfa Romeo Giulia- Quadrifoglio in AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. Carbotech CT2043 Alfa Romeo Rear Brake Pad Set Details: Manufacturer: Carbotech Manufacturer Part Number: CT2043 Carbotech Brake Compounds Carbotech 2043 The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800 F (426 C+). 1521 is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech 1521 is NOT recommended for ANY track use. Carbotech AX6 The AX6 is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6 for street driving as well, even though Carbotech doesn't recommend street driving with AX6 due to possible elevated levels of dust and noise. AX6 is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotech XP8 is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech does NOT recommended XP8 as a daily driven street pad due to elevated levels of dust and noise. Carbotech XP8 is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotech unleashed the XP10 to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10 has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10 still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech compounds so successful. Carbotech XP10 is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XP series compound with an excellent initial bite, torque and fade resistance over and above the XP10 compound. XP12 has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12 has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12 is more rotor aggressive than XP10 , but compared to the competition the XP12 is still very rotor friendly. XP12 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP20 The latest iteration of the highly successful XP series of compounds. XP20 is a step up from the highly successful XP16 compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20 is another major step in progression of the highly successful XP series line of compounds from Carbotech . XP20 has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotech XP20 maintains our tradition of having the outstanding release and modulation that has made all other Carbotech compounds so successful. Carbotech XP20 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP24 XP24 is the pinnacle compound of the extremely successful XP Series of compounds engineered by Carbotech . This compound is based on the same fundamentals that exist in all other Carbotech formulations. XP24 has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24 has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotech XP24 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech RP2 The RP2 compound was engineered for endurance racing based on our highly successful XP Series formulations. RP2 has strong initial bite, a little less modulation than our XP12 , but still maintains the rotor friendliness of our XP series compounds. RP2 has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2 is as rotor friendly as our XP series compounds. Carbotech RP2 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise.

Ferodo FCP1307H DS2500 Porsche 986 Base Front Brake Pads Fitting the Porsche 986 base model (non-s) front axle the Ferodo FCP1307H in the DS2500 compound is one of the best street/track pads available. No need to change to track pads and then to street pads every weekend. Now enjoy linear high-torque braking on the best of mountain rides and mild track days. Ferodo FCP1307H DS2500 Porsche 986 Base Front Brake Pads Details: Manufacturer: Ferodo Manufacturer part number: FCP-FCP1307H-N Primary Use: Street & Light Track Average Coefficient of Friction: 0.41 Temperature Range C: 0 - 500 C Temperature Range F: 32 - 932 F Ferodo DS2500 Brake Compound Details:The Ferodo DS2500 is the best hybrid street and track day pad available. Designed for driving on the street, mountain runs and light track day with a stable average friction coefficient of 0,41 over a wide working temperature range of 32 to 932 F, (0 to 500 C)Featuring a moderately high initial bite and the solid fade resistance of a trackpad, but with relatively low dust and noise levels of a street pad. When the Ferodo DS2500 is used as a street pad, it can produce some squeal on most vehicle platforms. The most common use of the Ferodo DS2500 is mountain runs, autocross, and some light track duty on street tires in colder temperatures.When used on track on heavy (3,000+ lbs.+) track cars with high horsepower and R Compound tires, the DS2500 pad wear rates tend to be considerably higher vs. Ferodo Racing's other compounds. Do not expect to win the WRL GTU class on Ferodo DS2500, but it is the perfect dual purpose street and light track day pad.. Ferodo FCP1307H DS2500 Brake Pad Fitment Front Axle: 1997 Porsche Boxster All 1998 Porsche Boxster All 1999 Porsche Boxster All 2000 Porsche Boxster All 2001 Porsche Boxster All 2002 Porsche Boxster 986 non-S 2003 Porsche Boxster All 2004 Porsche Boxster All 2005 Porsche Boxster All 2006 Porsche Boxster All 2007 Porsche Boxster All 2008 Porsche Boxster All 2007 Porsche Cayman All 2009 Porsche Boxster All 2009 Porsche Cayman All 2008 Porsche Cayman All