AP Racing J Hook Competition Disc 355x32mm D54 1 "a"

$529.00

Side

AP Racing J Hook Competition Disc 355x32mm D54

$529.00

Side

AP Racing 2-piece J Hook Disc Front Rotor Kit 355x32mm

Measuring 355mm x 35mm the AP Racing 13.05.10066 and 13.05.10067 are J Hook Competition Discs has a 54mm annulus with 72 directional cooling vanes used on the popular AP 13.01.10024 AP Racing C5 Corvette Front Six Piston Competition Brake Kit.

AP Racing 2-piece J Hook Disc Front Rotor Kit 355x32mm Details:

  • Manufacturer: AP Racing
  • Manufacturer part number right side: 13.05.10066
  • Previous part number right side: 13.05.10002
  • Manufacturer part number left side: 13.05.10067
  • Previous part number left side: 13.05.10003
  • Slotted face: Yes
  • Diameter: 355mm
  • Thickness: 32mm
  • Annulus radial depth: D54
  • Aluminum hat included: No
  • Rotor harwdare included: Nos
  • 14.0" x1.26" (355mm x 32mm), 72 Vane
  • Significant unsprung weight reduction (over 3 lbs. per side)
  • Much wider air gap and twice as many full internal cooling vanes reduce pad wear and brake fluid temps
  • Fully floating vs. standard fixed-hat design= less coning, cracking, vibration/judder
  • Aircraft nuts eliminate hassle of safety wire
  • Crack-resistant disc metallurgy specifically designed to offer a long service life
  • Anti-knockback disc attachment hardware reduces pad knockback through S-turns

Common Fitment:

  • AP Racing C5 Corvette Front Six Piston Competition Brake Kit

Iron Disc Benefits

So what can AP Racing J Hook iron discs do for a car previously equipped with carbon ceramic discs?

  • Increased airflow and slower heat transfer to other brake components- AP Racing J Hook discs have a unique, high-count vane design that promotes airflow, heat evacuation, and rapid cooling. They don't rely on a large surface area to cool via radiation. The iron discs will move more air than your carbon ceramic's, and as a result they won't heat your brake pads, caliper pistons, and brake fluid up as quickly. You'll be able to run longer sessions without brake fade, and you'll enjoy the confidence that comes along with them. They'll also make any brake ducts that you have on the car more effective and useful.
  • Huge range of compatible brake pad compounds- Iron discs will open up a much greater range of available brake pads. You'll be able to achieve a different feel, and tailor your brake setup depending on your needs and environment, whether that is running an AutoX or the most demanding racetrack in your area. You'll also likely be paying less per brake pad set than you were previously, and your pads will last longer.
  • Inexpensive spare discs- You'll no longer have to spend thousands of dollars when it's time to replace your discs. AP Racing J Hook's typically only cost $400-600 per iron disc ring, so you won't have to stress about anything happening to them. They're inexpensive enough that you can always keep a spare set on hand, so you won't have to worry about any brake-related downtime when you're out at the track.
  • Durability- Iron discs can take a beating. You can stash your spares in your race trailer, and you won't have to worry about handling them, covering them, dinging them, or chipping them when changing your wheels.

As you can see, although iron discs do come with a slight weight penalty, they're still the smart choice if you run your car hard on the racetrack. They're the obvious solution that has been proven countless times on tracks around the world, at all levels of motorsport.

Among iron disc choices, there are none better than AP Racing J Hooks. AP Racing J Hook Discs are the epitome of endurance racing components. They will hold up extremely well to any abuse you plan to throw at them. These discs have been proven time and again in professional racing, winning many races and championships (SRO, IMSA, WEC, Rolex, etc.).

Two-piece Floating Design with Aluminum Hat

As is the case with most metal, iron brake discs grow substantially when heated. As it is heated, a disc expands radially, increasing in diameter and circumference. One-piece disc designs run into problems when this occurs. Look at the picture below and imagine the disc is being heated on the track. As the disc expands, the outer edges of the disc are pulling away from the center of the disc, but there are no built-in provisions to allow for that expansion. The edges of the disc therefore pull, lift, and distort, which is called coning. Now imagine that disc vertical on the car, running in your caliper. Coning directly impacts the brake pads’ contact with the disc, leading to uneven wear and tapering, and even a long brake pedal.

Two-piece discs on the other hand, compensate for the expansion of the disc as it heats. This is accomplished by building ‘float’ into either the disc itself, or the disc hat/bell. In this case, the float is in the disc. If you look closely at the picture below, you can see that the mounting holes for the hat attachment bobbins are not round. They are an oblong shape. These channels allow the hat mounting hardware to slide as the disc is heated and expands, allowing the disc to run true in the caliper without distortion. That means less distortion, stress cracks, and pad taper.

Driver Gear

If you wear it to protect yourself while racing, the DiscoveryParts.com Driver Gear collection is where you'll find it!

Shop Driver Gear

Set Up & Trackside

Keep your team safe, prepared, and ready to go with the latest crew gear. Because no matter how many laps you have, how light your helmet is, what your last dyno number is, if your team does not get you to the line on time, you can not win.

Racecar Gear

If you mount it on or install it in your vehicle for track days or wheel-to-wheel racing, the DiscoveryParts Racecar Gear collection is where you'll find it!