Car Harnesses

Racing Radios Four Conductor (IMSA) In-Car Racing Radio Car Harness (Rear) Racing Radios 4 Conductor (IMSA) wiring in-car radio harness for Motorola mobile radios. Plugs directly into the REAR 16 pin accessory jack on Motorola mobile radios. Compatible with CM200, CM300, PM400, M1225 and CDM mobile radios. Racing Radios (IMSA) Car Harness Base Unit (Rear) Details: Manufacturer: Racing Radios Manufacturer part number: RCH-100010B-R Helmet connection: IMSA 4 Conductor PTT connection: 3 Pin chrome barrel connector Radio connection: Motorolla 16 pin rear push-in Racing Radios (IMSA) Car Harness Base Unit (Rear) Wiring Lengths: Black junction box length: 3" Black junction box to 16 Pin connector: 24" Black Juction Box to IMSA Helmet connector: 60" Black junction box to PTT: Connector: 84" If you have a Motorola Base Unit Radio and connect through the rear 16 pin connector panel, this is your car harness.

Racing Radios Four Conductor (IMSA) Radio Car Harness Four Conductor-Style (IMSA) Radio Car Harness By Racing Radios. For Motorola HandHeld Radios. Fits Most Motorola two-pronged style radios like the CP200, BPR40, P1225, PR400 and GP300 and SpeedCom ST & MT series handheld radios. Racing Radios Handheld Car Harness Details: Helmet End: IMSA (4 Conductor) Radio End: Motorolla 2 pin, fits Motorolla Handheld CP200, BPR40, P1225, PR400, GP300, SpeedCom MT & ST series handheld radios Push To Talk Connection: Universal 3 pin Manufacturer: Racing Radios Manufacturer part number: RCH-139010A-H This is the universal IMSA harness that goes from your Motorola or SpeedCom handheld (walkie talkie style) to your helmet with a push-to-talk connection.

5 Conductor 18" Long Coil Cord 5 Conductor coil cord is used on race car steering wheel remote buttons for PTT (Push To Talk), Drink, Flash to Pass, and many other uses. 5 Conductor 18" Long Coil Cord Details: Manufacturer: Racing Radios Manufacturer part number: G-7965118 Conductors: 5 Length: 18" long relaxed Wire Gauge: 24 The 18" long relaxed length is perfect for giving enough room to remotely hang your steering wheel, but not too long to where it droops below the dash. Usually coiled loosely 2x around the steering column to allow for movement, the 5 conductor 18" long coil cord is rugged and race worthy.

Racing Radios Four Conductor (IMSA) In-Car Racing Radio Car Harness (Front) Racing Radios 4 Conductor (IMSA) wiring in-car radio harness for Motorola mobile radios. Plugs directly into the FRONT microphone jack on Motorola mobile radios. Compatible with CM200, CM300, PM400, M1225 and CDM mobile radios. If you have a Base Unit Radio and connect through the front panel with a Cat 5 (internet) cable, this is your car harness. Racing Radios Four Conductor (IMSA) In-Car Racing Radio Car Harness (Front) Details: Manufacturer: Racing Radios Manufacturer part number: RCH-100010 Radio Connection: Cat 5 (Internet Cable) PTT Connection: 3 Pin Helmet Connection: IMSA (4 Conductor) [img-2429-left-large_default]

Racing Radios Four Conductor (IMSA) Radio Car Harness Kenwood Fitting all Kenwood handheld radios with a two pin connection, this Four Conductor-Style (IMSA) Radio Car Harness By Racing Radios connects your Kenwood radio to your IMSA (4C) helmet and PTT. Fitting all modern Kenwood handheld radios (2 male pins, one larger in diameter and longer, the other smaller in length and diameter) this Racing Radios car harness is ready for years of trouble free communications. This is the IMSA harness that goes from your Kenwood 2 pin handheld (walkie talkie style) to your IMSA (4C) helmet with a push-to-talk connection. Racing Radios Four Conductor (IMSA) Radio Car Harness Kenwood Details: Manufacturer: Racing Radios Manufacturer part number: RCH-KEN Helmet End: IMSA (4 Conductor) Radio End: Kenwood 2 pin Push To Talk Connection: Universal 3 pin [img-2426-left-large_default]

Racing Radios Four Conductor (IMSA) In-Car Universal Harness Universal 4 Conductor (IMSA) wiring radio car harness. Compatible with any handheld two-way radio. Requires proper adapter cable. Also can be used to connect a Vertex VX3200U Base Unit Harness to and IMSA Helmet & Push To Talk

SPEEDCOM MOT-MIH-V4 wiring harness is used on the Motorola XPR5550e Enhanced Digital Mobile UHF radio system. The main harness connection to the Motorola XPR5550e with a y connector to the IMSA female (helmet connection) and a universal 3 pin push-to-talk (PTT) connection. Speedcom Motorola XPR5550e IMSA Harness Details: Manufacturer: SPEEDCOM Manufacturer part number: MOT-MIH-V4 Connection 1: Motorola XPR5550e Connection 2: IMSA 4C female for helmet connection Connection 3: 3 Pin PTT

Racing Radios Three Conductor (NASCAR) Drag Racing Radio Car Harness Drag Racing Harness. 3 Conductor (NASCAR) wiring. Provides louder volume, required to drive helmet speakers. Fits Most Motorola two-pronged style radios like the CP200, BPR40, P1225, PR400 and GP300.

Racing Radios Custom IMSA In-Car Racing Radio Car Harness (Rear)In-Car Radio Car Harness By Racing Radios made to your specific lengths. 4 Conductor (IMSA) style wiring for Motorola mobile radios. Plugs directly into the REAR 16 pin accessory jack on Motorola mobile radios. Compatible with CM200, CM300, PM400, M1225 and CDM mobile radios. If you have a Motorola Base Unit Radio and connect through the rear 16 pin connector panel, this is the car harness you need. You can make custom lengths to fit your vehicle perfectly with no extra wires shoved behind the dash.Racing Radios Custom IMSA In-Car Racing Radio Car Harness (Rear) Details: Manufacturer: Racing Radios Manufacturer part number: RCH-10010-R-SP This is a custom made part and requires 2 days build time

Racing Radios Three Conductor (NASCAR) In-Car Racing Radio Car Harness (Rear) Racing Radios 3 Conductor (NASCAR) Wiring In-Car Radio Harness for Motorola mobile radios. Plugs directly into the REAR 16 pin accessory jack on Motorola mobile radios. Compatible with CM200, CM300, PM400, M1225 and CDM mobile radios. If you have a Motorola Base Unit Radio and connect through the rear 16 pin connector panel, this is your car harness. This is a custom built piece. Please allow 1-2 additional days before shipping.

Racing Radios Three Conductor (NASCAR In-Car Racing Radio Car Harness If You Have a Base Unit Radio and Connect Through the Front Panel, this is your car harness. Racing Radios 4 Conductor (NASCAR) wiring in-car radio harness for Motorola mobile radios. Plugs directly into the FRONT microphone jack on Motorola mobile radios. Compatible with CM200, CM300, PM400, M1225 and CDM mobile radios.

Racing Radios (IMSA) MOTOTRBO Car Harness Base Unit (Rear) In-Car Radio Car Harness By Racing Radios for Motorolla MOTOTRBO XPR base unit radios. Having a special 16pin connector that connects to your Motorola MOTOTRBO XPR base unit radio and splits to 4 Conductor (IMSA) for your driver and standard 3 pin PTT connection. This is a special harness compatible only with Motorolla MOTOTRBO XPR series radios. [img-13367-left-large_default] Racing Radios (IMSA) MOTOTRBO Car Harness Base Unit (Rear) Details: Manufacturer: Racing Radios Manufacturer part number: RCH-RCH-XPR-M Helmet connection: IMSA 4 Conductor PTT connection: 3 Pin chrome barrel connector Radio connection: Motorolla 16 pin rear push-in Racing Radios (IMSA) MOTOTRBO Car Harness Base Unit (Rear) Lengths: Black junction box length: 3" Black junction box to 16 Pin connector: 24" Black Juction Box to IMSA Helmet connector: 60" Black junction box to PTT; connector: 84" If you have a Motorola MOTOTRBO XPR Base Unit Radio and connect through the rear 16 pin connector panel, this is your car harness. [img-13367-left-large_default]

Racing Radios Four Conductor (IMSA) Motorola Dual In-Car Universal Harness 4 Conductor-Style (IMSA) wiring dual-radio universal car harness. Place two handheld radios in your car and switch to your backup radio whenever you need it. Proper radio adapter cable required. You Need 2 Of These Headset Adapter Cables to Work.

Racing Radios Three Conductor (NASCAR) Motorola Dual In-Car Harness 3 Conductor style (NASCAR) wiring dual radio car harness. Place two handheld radios in your car and switch to your backup radio whenever you need it. Compatible with Motorola two-prong style radios such as CP200, BPR40, P1225, PR400 and GP300.

Racing Radios Four Conductor (IMSA) Motorola Dual In-Car Harness 4 Conductor style (IMSA) wiring dual radio car harness. Place two handheld radios in your car and switch to your backup radio whenever you need it. Compatible with Motorola two-prong style radios such as CP200, BPR40, P1225, PR400 and GP300.