C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Side Skirts
$2,749.99
C3 Carbon Ferrari 458 Carbon Fiber Side Skirts
Made from aerospace-grade autoclaved dry carbon fiber and matched to the Ferrari factory's signature 1x1 3K plain weave pattern, these side skirts are a perfect match to the stunning carbon fiber on the 458. Ferrari can add them to your 458 build at the factory...for $9,000!
You can easily install them yourself using only hand tools for a fraction of the factory cost, without sacrificing even the smallest bit of fitment, finish, or quality. Unlike many other brands, these are not carbon overlaid on fiberglass. C3 uses only 100% hand-laid pre-preg dry carbon fiber, formed in the autoclave at high pressure and temperature using billet aluminum molds.
These Ferrari carbon fiber side skirts were originally developed using highly innovative fluid dynamics techniques and perfected in the wind tunnel in order to optimize the 458's aerodynamics. The lateral plane on each skirt plays a crucial role in reducing high-speed lift by minimizing air flowing from the side of the car into the underside. C3 Carbon's carbon fiber combines cosmetic appeal with outstanding technical performance, reducing the total weight of the car in the process.
FEATURES:
Autoclaved pre-preg dry carbon fiber construction with 1x1 3K plain weave matching factory Ferrari carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200o F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Fuel Door
$325.00
C3 Carbon Ferrari 458 Carbon Fiber Fuel Door
Upgrade the factory painted fuel door cover on your Ferrari 458 with a C3 carbon fiber cover! Made from aerospace-grade autoclaved dry carbon fiber, matched to Ferrari's traditional 1x1 3K plain weave pattern, it's a perfect match to the rest of the carbon on your 458. Installs easily in minutes.
FEATURES:
Autoclaved pre-preg dry carbon fiber construction with 1x1 3k plain weave matching OEM Ferrari carbon fiber
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200o F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 488 GTB-Spider Carbon Fiber Front Trunk
$2,199.99
C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Front Trunk
C3 uses digital 3D laser scanning to ensure that their autoclaved, pre-impregnated (pre-preg) dry carbon fiber front trunk panels fit and function as perfectly as the factory pieces. The difference is C3 does it for a fraction of the cost of Ferrari carbon! C3 has matched the OEM Ferrari 1x1 3K plain weave for a perfectly factory Ferrari appearance. Easy installation makes this a must-have for any 488 GTB or Spider owner.
FITS: All 2016+ Ferrari 488 models
FEATURES:
Autoclaved pre-preg dry carbon fiber with 1x1 3K plain weave identical to Ferrari factory carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Installs in minutes without any modification
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200o F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Front Trunk Package
$1,999.99
C3 Carbon Ferrari 458 Carbon Fiber Front Trunk
C3's exacting quality, precise fitment, and a premium hand-polished finish come at a far more reasonable price than the factory Ferrari pieces. Precision-formed in an autoclave from the finest aerospace-grade pre-impregnated dry carbon fiber, each C3 piece matches the 1x1, 3K plain weave of OEM Ferrari carbon perfectly. Fit-and-finish are, of course, impeccable for a truly factory appearance.
FEATURES:
Autoclaved pre-preg dry carbon fiber 1x1, 3K plain weave matched to OEM Ferrari
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Each piece installs in minutes without any modifications
KIT INCLUDES:
Four pre-preg dry carbon trim panels
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200o F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Rear Vent Panels
$2,495.00
C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Rear Vent Panels
Fitment: 2014+ Lamborghini Huracan
Beautiful carbon fiber replacement for the black plastic trim panels surrounding the Lamborghini Huracan LP610's rear engine hatch. C3 Carbon's autoclaved, pre-impregnated (pre-preg) dry carbon fiber panels install simply with no modification, bringing you the most accurate, beautiful fit and finish available anywhere.
C3 Carbon matches the OEM Lamborghini 2x2, 3K twill carbon weave perfectly for an original Lamborghini appearance. The spectacular look of these carbon fiber piece adds so much flair to the engine cover of Lambo's one-of-a-kind Huracan.
LAMBORGHINI HURACAN LP610 CARBON FIBER ENGINE BAY DETAILS
Manufacturer: C3 Carbon
Manufacturer part no.: C3-LAMBORGHINI10000
Pre-preg dry carbon fiber with 2x2, 3K twill weave matched to Lamborghini OEM carbon fiber
Automotive urethane clear coat is hand polished to a mirror finish
Exact OEM fit
Installs easily without any modifications
Digital 3D laser scans of OEM parts guarantee precise fitment
Autoclave formed using CNC-machined billet aluminum moulds at over 100 psi and 2000º F
Experience the Difference: C3 Carbon Products
C3 Carbon has become immensely popular among today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out. In a market full of sub-par aftermarket offerings, each C3 Carbon product is manufactured to extremely tight tolerances, providing a perfect fit. C3's process maximizes strength while reducing weight, ensuring years of exceptional exceptional performance and extraordinary beauty. All while keeping costs significantly lower than OEM carbon fiber pieces.
Every C3 Carbon product uses premium pre-impregnated dry carbon formed in CNC-machined, billet aluminum moulds. Each mould begins as multiple 3D laser scans of an OEM component, so you know you’re getting a perfect fit every time. Pre-preg dry carbon is stronger and lighter than wet carbon, up to 66% lighter than competing products. C3 Carbon's advanced manufacturing methods produce a smoother surface on each part for exacting dimensional accuracy. No more shaving edges, widening mounting holes and flexing pieces to make them fit.
C3 Carbon finishes each piece with an automotive urethane clear coat that is UV cured for durability, guaranteeing that C3 Carbon parts won't yellow or fade over time.
Many imported -- and even some domestically produced -- carbon fiber products use wet carbon (which is heavier than dry carbon fiber) or fiberglass backing with a carbon fiber laminate (which is even heavier). These materials and manufacturing methods often produce a poor finish, a less durable product, and poor fitment with large gaps. than C3 Carbon products. Even when using dry carbon fiber, most manufacturers use inexpensive fiberglass moulds that can't maintain the millimeter-perfect tolerances C3 Carbon demand of each piece.
In the end, C3 Carbon considers each piece to be a work of art, the result of a love of the special cars for which C3 Carbon pieces are designed. We think you love them, too, and we enjoy helping you make them your own!
C3 Carbon
C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Engine Cover
$1,424.99
C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Engine Cover FREE SHIPPING! Beautiful carbon fiber replacement for the black plastic engine cover on the Lamborghini Huracan LP610. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber engine cover installs simply with no modification, bringing you astonishing factory-quality fit and finish at an affordable price. C3 matches the OEM Lamborghini 2x2, 3K twill carbon weave perfectly for an original Lamborghini appearance. The spectacular look of this carbon fiber piece is the perfect upgrade to the Huracan engine room. Fitment: 2014+ Lamborghini Huracan FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2, 3K Twill Weave matched to Lamborghini OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modifications Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products: Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Rear Deck Lid Trim
$1,195.00
C3 Carbon Lamborghini Huracan LP610 Carbon Fiber Rear Deck Lid Trim
Fitment: 2014+ Lamborghini Huracan
Beautiful carbon fiber replacement for the black plastic trim panel on the Lamborghini Huracan LP610's rear deck lid. C3 Carbon's autoclaved, pre-impregnated (pre-preg) dry carbon fiber panel installs simply with no modification, bringing you astonishing factory-quality fit and finish at an affordable price.
C3 Carbon matches the OEM Lamborghini 2x2, 3K twill carbon weave perfectly for an original Lamborghini appearance. The spectacular look of this carbon fiber piece adds a drama to the rear appearance of your Huracan.
LAMBORGHINI HURACAN LP610 CARBON FIBER DECK LID DETAILS
Manufacturer: C3 Carbon
Manufacturer part no.: C3-LAMBORGHINI10900
Pre-preg dry carbon fiber with 2x2, 3K twill weave matched to Lamborghini OEM carbon fiber
Automotive urethane clear coat is hand polished to a mirror finish
Exact OEM fit
Installs easily without any modifications
Digital 3D laser scans of OEM parts guarantee precise fitment
Autoclave formed using CNC-machined billet aluminum moulds at over 100 psi and 2000º F
Experience the Difference: C3 Carbon Products
C3 Carbon has become immensely popular among today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out. In a market full of sub-par aftermarket offerings, each C3 Carbon product is manufactured to extremely tight tolerances, providing a perfect fit. C3's process maximizes strength while reducing weight, ensuring years of exceptional exceptional performance and extraordinary beauty. All while keeping costs significantly lower than OEM carbon fiber pieces.
Every C3 Carbon product uses premium pre-impregnated dry carbon formed in CNC-machined, billet aluminum moulds. Each mould begins as multiple 3D laser scans of an OEM component, so you know you’re getting a perfect fit every time. Pre-preg dry carbon is stronger and lighter than wet carbon, up to 66% lighter than competing products. C3 Carbon's advanced manufacturing methods produce a smoother surface on each part for exacting dimensional accuracy. No more shaving edges, widening mounting holes and flexing pieces to make them fit.
C3 Carbon finishes each piece with an automotive urethane clear coat that is UV cured for durability, guaranteeing that C3 Carbon parts won't yellow or fade over time.
Many imported -- and even some domestically produced -- carbon fiber products use wet carbon (which is heavier than dry carbon fiber) or fiberglass backing with a carbon fiber laminate (which is even heavier). These materials and manufacturing methods often produce a poor finish, a less durable product, and poor fitment with large gaps. than C3 Carbon products. Even when using dry carbon fiber, most manufacturers use inexpensive fiberglass moulds that can't maintain the millimeter-perfect tolerances C3 Carbon demand of each piece.
In the end, C3 Carbon considers each piece to be a work of art, the result of a love of the special cars for which C3 Carbon pieces are designed. We think you love them, too, and we enjoy helping you make them your own!
C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Side Mirrors
$1,349.99
C3 Carbon Ferrari 458 Carbon Fiber Side Mirrors
Direct replacement for the factory-fitted side mirrors on the Ferrari 458, these beautifully finished two-piece carbon fiber mirror cases from C3 Carbon add drama and style to your 458.
C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber side mirrors are a 1x1, 3K plain weave matching OEM Ferrar carbon precisely. They install easily and fit perfectly for a truly factory appearance, truly evoking the long motorsports heritage of your Ferrari 458.
Kit contains both left and right mirror casings and stalks. You will re-use the mirror lenses from your 458.
FITS: 2010+ Ferrari 458 models
FEATURES:
Includes both upper and lower mirror case for a completely factory appearance
Autoclaved pre-preg dry carbon fiber with 1x1 3k plain weave matched to Ferrari OEM carbon fiber
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200o F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 488 GTB-Spider Carbon Fiber Engine Oil-Latch Cover
$999.99
C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Engine Oil/Latch Cover
Stunning carbon fiber engine accessory cover sits front and center in your 488 engine bay.
Ferrari displays the 488's beautiful turbocharged V8 engine under a glass bonnet, but the stock flat-black plastic oil fill/latch cover (front-and-center under the bonnet) is a significant let down. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber replacement fits and functions as perfectly as the factory piece (for which Ferrari charges a fortune) and brings the 488 engine bay up to standard.
C3 matched the traditional Ferrari 1x1 3K plain weave to duplicate factory-original quality and craftsmanship at a fraction of the factory cost. Easy installation makes this a must-have for any 488 owner.
FITS: 2016+ Ferrari F488 GTB and Spider
FEATURES:
Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matches Ferrari factory carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Installs in minutes without any modification
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 488 GTB Carbon Fiber Rear Diffuser
$3,099.00
C3 Carbon Ferrari 488 GTB Carbon Fiber Rear Diffuser
Replace the heavy, fragile fiberglass diffuser on the rear on your Ferrari 488 with a strong, lightweight, beautifully crafted carbon fiber rear diffuser from C3.
The 488's heavy, drab-black factory diffuser belies the car's Formula 1 roots, adding unnecessary weight aft of the rear axles. Naturally, Ferrari offers a carbon fiber replacement -- for over $10,000! C3 Carbon uses an autoclave to create our pre-impregnated (pre-preg) dry carbon fiber 488 diffuser for uncompromising quality, fitment, and finish. All at a fraction of the cost of the Ferrari piece. C3 have perfectly matched the OEM Ferrari 1x1 3K plain carbon fiber weave to make a stunning diffuser that is functional, beautiful, and durable.
A common complaint among 488 drivers is the factory diffuser being easily and irreparably damaged during everyday driving. Not only is the C3 Carbon rear diffuser more robust in this regard, but the fins are individually replaceable should one be scuffed or damaged. Not so with the Ferrari piece.
FITS: 2016+ Ferrari 488 GTB
FEATURES:
Autoclaved pre-preg dry carbon fiber in a 1x1 3K plain weave identical to factory Ferrari carbon fiber
Weighs 67% less than the original fiberglass Ferrari piece
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit with ground clearance equal to the original factory diffuser
Installs easily in minutes with no modification to your 488
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 488 GTB-Spider Carbon Fiber Rear Fog Light Cover
$449.99
C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Rear Fog Light Cover
Very cool carbon fiber rear fog lamp cover for your Ferrari 488 GTB or Spider. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber process results in a stunning piece that installs easily and fits perfectly, adding a dash of drama to the rear of your 488. C3 matches the factory Ferrari 1x1 3K plain weave for a perfectly original Ferrari appearance. Easy installation makes this a must-have for any 488 GTB or Spider owner. Especially complementary to the C3 Carbon Fiber Rear Diffuser for the Ferrari 488.
FITS: 2016+ Ferrari 488 models
FEATURES:
Autoclaved pre-preg dry carbon fiber 1x1 3K plain weave matched to Ferrari factory carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Installs in minutes without any modification
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari F12 Carbon Fiber Shift Paddles
$799.99
C3 Carbon Ferrari F12 Carbon Fiber Shift Paddles
Direct replacements for the factory fitted shift paddles on the Ferrari F12, these beautifully finished and easy to install carbon fiber shift paddles from C3 Carbon add style to your F12.
C3's autoclaved, pre-impregnated dry 3k Carbon Fiber Shift Paddles install easily, fit perfectly, and perform flawlessly. C3 has matched the OEM Ferrari 1x1 weave for a perfect original Ferrari appearance. This a must-have for any F12 owner.
All 2012+ Ferrari F12 models
FEATURES:
Autoclaved pre-preg dry 3k carbon fiber with 1x1 weave matched to Ferrari OEM carbon fiber
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
"UP" and "DOWN" are silk-screened on the respective paddle
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 488 GTB-Spider Carbon Fiber Door Sills
$549.99
C3 Carbon Ferrari 488 GTB/Spider Carbon Fiber Door Sills
Gorgeous carbon fiber door sill plates for your Ferrari 488 GTB or Spider. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber Sill Plates install easily and fit perfectly, bringing you the beauty of carbon fiber every time you step into your 488. C3 matches the OEM Ferrari 1x1 3K plain weave for an original Ferrari factory appearance. Easy installation makes this a must-have for any 488 GTB or Spider owner.
FITS: 2016+ Ferrari 488 models
FEATURES:
Autoclaved pre-preg dry carbon fiber with 1x1 3K plain weave matched to Ferrari factory carbon
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Installs in minutes without any modification
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Bonnet Latch Cover
$299.99
C3 Carbon Ferrari 458 Carbon Fiber Bonnet Latch Cover
The factory trim piece that covers the Ferrari 458's bonnet latch (in the engine bay) is made of unattractive black plastic. This oversight detracts from the appearance of the engine bay (more so when it is surrounded by C3 Carbon Fiber Engine Covers). That's easily rectified with C3 Carbon Fiber Latch Cover.
Made from aerospace-grade autoclaved dry carbon fiber, matched to Ferrari's traditional 1x1 3K plain weave pattern, it's a perfect match to Ferrari factory carbon or the C3 Carbon Fiber Engine Cover pieces. And it installs easily in minutes.
FEATURES:
Autoclaved pre-preg dry carbon fiber construction with 1x1 3k plain weave matching OEM Ferrari carbon fiber
Clear-coated with automotive urethane, hand polished to a mirror finish
OEM-perfect fit
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Front Intake Winglets
$999.99
C3 Carbon Ferrari 458 Carbon Fiber Front Intake Winglets
C3 Carbon replacements for the stock intake flaps on the nose of the Ferrari F458. The OEM pieces are boring painted fiberglass, perfect for replacement with stunning high-gloss carbon fiber from C3. Crafted using autoclaved, pre-impregnated 3k dry carbon fiber in a 1x1 weave matching OEM Ferrari carbon fiber, these replacement front winglets are things of beauty.
Expertly matched to the identical specs of the OEM pieces, fit and finish are perfect. And with Ferrari's own carbon fiber replacements costing nearly $4,400, you get the OEM carbon look without the Ferrari price tag.
Includes two front intake winglets for the Ferrari 458 Coupe or Spider.
FEATURES:
Autoclaved pre-preg dry carbon fiber in a 1x1 3k plain weave matching OEM Ferrari carbon
Clear-coated using automotive urethane, hand polished to a mirror finish
OEM-level fitment for a perfect replacement with no need for any modifications
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at over 100 psi and 200o F
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon
C3 Carbon Ferrari 458 Carbon Fiber Rear Fog Light Trim
$1,099.99
C3 Carbon Ferrari 458 Carbon Fiber Rear Fog Light Trim
Replace the heavy, drably-painted fiberglass rear fog light surrounds on your Ferrari 458 with beautiful OEM-quality Carbon Fiber Surrounds from C3. Expertly crafted from autoclaved, pre-impregnated dry carbon fiber matched to the factory Ferrari 1√ó1 3K plain weave, the C3 Carbon Fiber Rear Fog Surrounds add a distinct touch of beauty and visual interest to the rear of the 458.
C3 uses the same production processes Ferrari uses for their OEM parts, guaranteeing perfect fitment surround and requiring no modifications for installation.
Includes two C3 Carbon Fiber Rear Fog Light Surrounds
FEATURES:
Autoclaved, pre-preg dry carbon fiber in a 1x1 3K plain weave identical to factory Ferrari carbon
Clear-coated with a automotive gloss urethane, hand polished to a mirror finish
OEM-level quality and fitment
Digitally 3D laser scanned for guaranteed fitment
Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit
Experience the Difference of C3 Carbon Products
Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts.
Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past.
C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time.
Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
