Checkered Flag Garage Sale

Stilo Helmets ST5 FN 8860-2018 FIA 8860 certification valid to 2034 on these ST5 FN 8860 carbon fiber helmets. The Stilo Helmet ST5 FN 8860-2018 is a premium carbon fiber racing helmet built for professional drivers who need FIA 8860-2018 homologation and refuse to compromise on safety, weight, or visibility. Designed around Stilo’s Formula Naked platform, this helmet delivers elite-level protection in an exceptionally lightweight full-face design made for serious competition. Professional-Level Carbon Helmet Protection The Stilo ST5 FN 8860-2018 is engineered for drivers who want one of the lightest FIA 8860-2018 full-face racing helmets available. The FN, or Formula Naked, design removes the integrated side accessory ports found on the Stilo ST5 GT 8860-2018 Carbon Fiber Helmet, helping reduce weight while maintaining compatibility with select Stilo communication systems, top forced-air accessories, and helmet eject systems. Its 100% medium-tensile carbon shell keeps mass low, while the aerodynamic ST5 profile, wide eye port, and refined interior comfort make it a strong choice for formula cars, open-cockpit racing, and other high-level motorsport applications where every ounce matters. Stilo Helmets ST5 FN 8860-2018 Sizing Chart Stilo Helmets ST5 FN 8860-2018 Features FIA 8860-2018 certified carbon fiber racing helmet Includes Stilo HANS posts Discovery Parts Stilo Owner's Kit sold separately Formula Naked FN design removes integrated side ports for reduced weight Compatible with select electronics, top forced-air systems, and helmet eject systems 100% medium-tensile carbon construction Stilo ST5 shields are interchangeable across ST5 helmet models Supplied with a 3mm clear visor Eight top ventilation holes Re-designed cheek pads for improved contouring and comfort Sizing available from 54 cm through 64 cm Two-shell construction helps improve fit and reduce unnecessary bulk Stilo Helmets ST5 FN 8860-2018 Weight Small shell: 1200 g / 2.4 lb Large shell: 1320 g / 2.7 lb Stilo Helmets ST5 FN 8860-2018 FAQs What does FIA 8860-2018 certification mean on the Stilo ST5 FN?FIA 8860-2018 is an advanced professional motorsport helmet standard designed for the highest levels of racing. It requires more stringent impact and penetration performance than standard entry-level helmet certifications. What is the difference between the Stilo ST5 FN 8860-2018 and the ST5 GT 8860-2018?The ST5 FN uses Stilo’s Formula Naked layout, which removes the built-in side accessory ports found on the GT version. This helps reduce weight and gives the FN a cleaner, more streamlined configuration for drivers who do not need the GT’s integrated side-port setup. Does the Stilo ST5 FN 8860-2018 include a visor?Yes. The helmet is supplied with a 3mm clear visor, and additional ST5-compatible visor options are available separately for different lighting conditions. Can the Stilo ST5 FN 8860-2018 be used with HANS or FHR devices?Yes. The helmet includes Stilo HANS posts and is designed for use with head and neck restraint systems required in many forms of competitive racing. Can electronics, forced air, or an eject system be added to this helmet?Yes. While the FN does not have the integrated side ports of the ST5 GT, it can still be configured with select communications equipment, top forced-air components, and a helmet eject system. Who is the Stilo ST5 FN 8860-2018 best suited for?This helmet is ideal for professional and serious amateur racers who need FIA 8860-2018 certification, want an ultra-light carbon full-face helmet, and prioritize premium protection with a clean Formula-style layout. If you want the absolute lightest FIA 8860-2018 helmet in Stilo’s lineup, take a look at the Stilo Helmets ST5 FN ZERO 8860-2018 ABP Carbon Helmet.  

Sparco Prime LT Race Suit (Limited Edition) The Sparco Prime LT race suit is a limited edition suit available only for the US market. The Prime LT design features two unique colorways. This limited edition suit was only made available for a single year in 2021. The Sparco Prime LT race suit is the same suit material developed for the McLaren F1 team and is one of the lightest FIA approved racing suit in the world. The Prime LT race suit has unparalleled technological features created in the Sparco R&D laboratories. This project involved optimizing every detail of the suit in terms of material and construction. Details such as an ultra slim zipper, soft and seamless Nomex/Vicosa wrist and ankle cuffs, neck and shoulder pads further reduced, thinner thread used and stitching flattened even more. The Sparco Prime LT race suit features a three-layer construction using proprietary Sparco technology. The third, outer layer is a double-faced mesh made from original DuPont Nomex Comfort, an innovative fabric that delivers both extreme protection and maximum comfort, woven using the Kompact® system. This material contains a high percentage of antistatic fibers, giving it extremely effective antistatic properties as well as exceptional breathability. The Sparco Prime LT race suit weighs from 240 to 270 grams per square meter (depending on size). SPARCO PRIME LT RACE SUIT TECHNOLOGY Lightest FIA approved suit in the world Exclusive DuPont Nomex Comfort fibers provide superior fire protection and comfort Pre-curved arms and legs Lightweight zipper and collar Breathable stretch panels FIA 8856-2000 approved SKU 001133U

Sparco Prime Spec 1 Driver Race Suit Save $1,300 off suggested retail price! The Sparco Prime Spec 1 Race Suit is a USA-exclusive suit that improves on Sparco’s original version of the Prime SP-16. The first thing you will notice is the new suit design. The Prime Spec 1 introduces two new multi-color options. In addition to a new design, the Sparco Prime Spec 1 adds extra features like fully-floating sleeves, belted waist, and internal pockets. The Sparco Prime Spec 1 Race Suit was made in collaboration with the McLaren Formula One team, resulting in the lightest FIA-approved racing suit in the world. The Prime Spec 1 has unparalleled technological features developed in Sparco’s vaunted R&D laboratories. This development project involved optimizing every race suit detail in terms of materials and construction. Details like an ultra-slim zipper, soft seamless Nomex/Vicosa® wrist and ankle cuffs, further reduced neck and shoulder pads, use of thinner thread, and ultra-flat stitching. The Sparco Prime Spec 1 Race Suit uses a three-layer construction with proprietary Sparco technology. The third, outer layer is a double-faced mesh made from original DuPont Nomex Comfort, an innovative fabric that delivers both extreme protection and maximum comfort, woven using the Kompact® system. The resulting material contains a high percentage of antistatic fibers, giving it extremely effective antistatic properties as well as excellent breathability. The Sparco Prime Spec 1 Race Suit features pre-curved arms and legs along with strategically-placed mesh stretch panels, giving this racing suit unbelievable comfort. The Sparco Prime Spec 1 is available in two color options. Sparco Prim Spec 1 Driver Race Suit Details: FIA 8856-2000 homologated Lightest FIA-approved suit in the world Exclusive DuPont Nomex fibers provide superior fire protection and comfort Pre-curved arms and legs Strategically located stretch panels Seamless arms and legs

Stilo ST5 GT Composite Racing Helmet   Snell SA2020 / FIA 8859-2015 The Stilo ST5 GT Composite Racing Helmet combines lightweight fiberglass/Kevlar composite construction, exceptional visibility, and one of the most versatile integrated accessory systems in motorsports. Designed for GT racing, endurance competition, road racing, and performance driving, the ST5 GT delivers professional racing helmet technology with the flexibility to accommodate a wide range of driver equipment. Certified to Snell SA2020 and FIA 8859-2015, the Stilo ST5 GT Composite features an advanced Multi Sandwich Fiber (MSF) shell, an expansive eyeport, a clear anti-fog visor, noise-attenuating earmuffs, and integrated side ports for compatible communication, hydration, and ventilation accessories. Its Intermediate Oval interior shape, removable comfort padding, and two-shell construction provide a secure, customizable fit. Whether preparing for sprint races, endurance events, or track days, the Stilo ST5 GT Composite offers an excellent combination of comfort, safety engineering, and versatility. Stilo ST5 GT Composite Racing Helmet Features Snell SA2020 Certified: Meets the Snell SA2020 automotive racing helmet safety standard. FIA 8859-2015 Homologated: Approved to the FIA 8859-2015 motorsport helmet standard. Fiberglass/Kevlar Composite Shell: Multi Sandwich Fiber construction engineered for strength, impact management, and comfort. Autoclave-Molded Construction: Advanced shell manufacturing process designed to deliver consistent structural performance. Wide Eyeport: Expansive viewing area improves peripheral vision and cockpit awareness. Clear Anti-Fog Visor: Includes a 3mm clear shield with an anti-fog treatment. Central Visor Lock: Convenient center-mounted closure designed for operation while wearing racing gloves. Integrated Side Accessory Ports: Accommodate compatible radio, hydration, and ventilation accessories. Noise-Attenuating Earmuffs: Included removable earmuff cushions help reduce unwanted cockpit noise. Removable Cheek and Crown Padding: Allows fit adjustments using compatible Stilo interior components. Intermediate Oval Fit: Designed for a comfortable, secure fit across a variety of head shapes. Two Shell Sizes: Small and large exterior shells reduce unnecessary bulk. M6 FHR Terminals: Factory-installed threaded receivers accommodate approved HANS and head-and-neck-restraint anchors. Optional Forced-Air Compatibility: Supports compatible Stilo air-cooling accessories. Multiple Visor Options: Compatible with selected clear, tinted, mirrored, and iridium ST5 shields. Made in Italy: Manufactured and assembled using Stilo's motorsport helmet production processes. Lightweight Fiberglass/Kevlar Multi Sandwich Fiber Shell The Stilo ST5 GT Composite features an advanced Fiberglass/Kevlar Multi Sandwich Fiber (MSF) shell designed to balance structural strength, impact-energy management, and helmet weight. Its composite shell construction uses multiple reinforcing materials arranged to provide the protective performance required by Snell SA2020 and FIA 8859-2015. Stilo manufactures the composite shell using an autoclave molding process designed to deliver consistent construction and strength throughout the helmet. The ST5 GT Composite offers a premium alternative to conventional fiberglass racing helmets while maintaining a comfortable, manageable weight for extended driving sessions. Snell SA2020 and FIA 8859-2015 Racing Certification The Stilo ST5 GT Composite carries two recognized automotive motorsport safety certifications: Snell SA2020: Automotive racing helmet certification addressing impact performance and other motorsport-specific safety requirements. FIA 8859-2015: FIA homologation for racing helmets used in approved motorsport applications. These certifications make the ST5 GT Composite suitable for numerous road racing, club racing, track-day, and endurance racing applications where the relevant standards remain accepted. Important: FIA 8859-2015 is not the same as FIA 8860-2018. Racing organizations establish their own accepted certification standards and expiration requirements. Always verify helmet eligibility before competition. Large Eyeport for Exceptional Driver Visibility Visibility is one of the defining characteristics of the Stilo ST5 GT Composite. Its generous eyeport design provides excellent peripheral vision, allowing drivers to maintain greater awareness of mirrors, approaching competitors, dashboard instruments, and cockpit surroundings. The expanded opening is particularly valuable for GT and endurance racing, where situational awareness is essential when navigating traffic and monitoring vehicle information. The helmet's eyeport design also supports Stilo's extensive selection of replacement visors and optical accessories. 3mm Clear Anti-Fog Racing Visor The ST5 GT Composite includes a 3mm clear visor with anti-fog treatment designed to help maintain visibility in changing cockpit conditions. Stilo's central visor locking mechanism provides an accessible closure point that can be operated while wearing racing gloves. The ST5 visor platform supports multiple optional shield finishes, allowing drivers to tailor their setup for different lighting conditions. Compatible options may include clear, smoke, mirrored, and iridium finishes, depending on availability. Explore the Stilo ST5 and ST5.1 Replacement Helmet Shields for additional options. Integrated Side Ports for Maximum Customization One of the ST5 GT Composite's most distinctive features is its integrated side accessory port system. Unlike conventional racing helmets that may require external accessory mounting arrangements, Stilo designed the ST5 shell with dedicated side ports that accommodate compatible components while maintaining a clean helmet profile. Depending on the selected installation, the helmet can accommodate: Integrated communication electronics Compatible microphones and speakers Radio and intercom connection systems Driver hydration equipment and drinking tubes Side-air ventilation accessories Compatible air-cooling systems This modular configuration makes the ST5 GT particularly useful for endurance racing teams and drivers who need to customize their helmets for different vehicles. Communication electronics, hydration systems, air accessories, and other optional equipment are sold separately unless specifically included in the selected configuration. Noise-Attenuating Earmuffs for GT and Endurance Racing The Stilo ST5 GT Composite includes removable noise-attenuating earmuff cushions designed to reduce unwanted sound inside noisy competition vehicles. By creating additional isolation around the ears, these cushions can help improve driver comfort during extended racing sessions. They also provide a useful foundation for compatible integrated communication systems, allowing microphone and speaker equipment to be installed according to driver preference. For endurance racers, effective sound management can make radio communication easier to understand during long stints. Removable Cheek Pads and Adjustable Interior Fit Proper helmet fit is essential for protective performance, comfort, and stability. The ST5 GT Composite incorporates removable cheek and crown comfort padding, allowing compatible interior components to be exchanged when appropriate. This flexibility enables drivers to fine-tune the helmet's fit without compromising the integrity of the protective shell. The black Nomex interior provides fire-resistant materials suitable for automotive motorsport applications. Stilo's Intermediate Oval interior shape is designed to provide secure contact around the head while accommodating a broad range of drivers. Replacement pads must be selected specifically for the ST5 helmet platform and installed according to manufacturer recommendations. Two Shell Sizes for Reduced Weight and Bulk The Stilo ST5 GT Composite uses two exterior shell sizes to provide more proportional helmet dimensions across its available size range. The smaller shell accommodates helmet sizes 54, 55, 57, and 59, while the larger shell accommodates sizes 60, 61, 63, and 64. This approach helps reduce unnecessary exterior material around smaller head sizes while providing adequate interior dimensions for larger drivers. The transition between the small and large shell occurs at size 60, making it particularly important to evaluate fit when selecting between sizes 59 and 60. M6 HANS and FHR Anchor Compatibility The Stilo ST5 GT Composite includes factory-installed M6 threaded mounting receivers designed for approved Frontal Head Restraint hardware. These threaded mounting points allow compatible HANS and other FHR anchor posts to be installed without modifying the helmet shell. Important: M6 threaded receivers are included, but HANS/FHR anchor posts are sold separately unless specified in the selected package. Always use approved anchor hardware and follow the installation requirements of the helmet and head-and-neck-restraint manufacturers. Optional Forced-Air Cooling and Hydration Systems For drivers competing in hot environments or extended endurance races, the ST5 GT Composite can be configured with compatible Stilo ventilation and hydration accessories. Available configurations include selected side-air and top-air systems that can help introduce external cooling air into the helmet. Hydration accessories allow compatible drinking tubes to be routed through the helmet's integrated accessory system. The helmet's modular design helps keep these systems organized while reducing interference with the driver's comfort padding and cockpit equipment. Air-cooling hardware, hydration components, and external cooling equipment are available separately. Stilo ST5 GT Composite Helmet Specifications Manufacturer: Stilo Model: ST5 GT Composite Helmet Type: Full-face automotive racing helmet Snell Certification: SA2020 FIA Homologation: FIA 8859-2015 Shell Material: Fiberglass/Kevlar Multi Sandwich Fiber Shell Construction: Autoclave-molded composite Exterior Shell Sizes: Two Fit Profile: Intermediate Oval Interior: Black Nomex Comfort Padding: Removable cheek and crown pads Earmuffs: Removable noise-attenuating cushions included Included Shield: 3mm clear anti-fog visor Visor System: Central locking mechanism Compatible Shields: Stilo ST5 and ST5.1 FHR Mounting: Factory-installed M6 threaded receivers FHR Anchor Posts: Sold separately Accessory Ports: Integrated side-mounted system Communication System: Optional Hydration System: Optional Forced-Air Compatibility: Yes, with compatible accessories Chin Strap: Double D-ring Helmet Bag: Included Available Finishes: Silver, Matte Black, White Manufacturer Country: Italy Stilo ST5 GT Composite Sizing Chart  Stilo ST5 GT Composite Available Colors The ST5 GT Composite is offered in three traditional racing finishes: Silver: Metallic motorsport appearance with a premium gloss finish. Matte Black: Subtle, understated styling with a non-gloss exterior. White: Classic racing helmet appearance suitable for a wide range of driver equipment. Color and size availability may vary by remaining manufacturer inventory. Stilo ST5 GT Composite vs. ST5 GT Carbon The Stilo ST5 GT Composite and ST5 GT Carbon share the versatile ST5 platform, large eyeport, integrated accessory ports, and motorsport-focused design. The primary difference is the outer shell construction. ST5 GT Composite: Uses Stilo's fiberglass/Kevlar Multi Sandwich Fiber construction, providing a balance of performance, durability, and value. ST5 GT Carbon: Uses a carbon fiber shell designed to reduce weight while preserving the ST5 platform's flexibility and accessory compatibility. Both versions are intended for drivers who value integrated equipment options and a customizable GT racing helmet configuration. Ideal Applications for the Stilo ST5 GT Composite The ST5 GT Composite is designed for a wide range of automotive motorsport applications: GT Racing: Wide eyeport, noise-attenuating earmuffs, and optional communication integration. Endurance Racing: Compatible hydration, air-cooling, and radio accessory systems. Club Racing: Full-face construction and recognized Snell and FIA certifications. Track Days and HPDE: Comfortable, secure helmet design for performance driving. Touring Car Racing: Wide field of vision and modular communication options. Time Trials: Lightweight construction and supportive interior fit. Sprint Racing: Professional motorsport helmet features for competitive driving sessions. Always confirm that the helmet's Snell SA2020 and FIA 8859-2015 certifications remain accepted by your racing organization. Stilo ST5 GT Composite Frequently Asked Questions What certifications does the Stilo ST5 GT Composite have? The ST5 GT Composite carries Snell SA2020 and FIA 8859-2015 certifications. Confirm that these standards are accepted for your intended racing application. Is the Stilo ST5 GT Composite made from carbon fiber? The ST5 GT Composite uses a fiberglass/Kevlar Multi Sandwich Fiber shell. The ST5 GT Carbon is a separate model featuring carbon fiber construction. Does the Stilo ST5 GT Composite include HANS anchors? The helmet includes factory-installed M6 threaded receivers, but compatible HANS/FHR anchor posts are sold separately. Does the ST5 GT Composite come with a visor? Yes. A clear 3mm anti-fog visor is included. Can I install tinted or mirrored shields? Yes. Compatible Stilo ST5 and ST5.1 replacement shields are available in several optional finishes. Does the ST5 GT include built-in communications? The standard helmet includes accessory ports and removable earmuffs. Radio electronics, microphones, speakers, and compatible communication kits are available separately. Can I install a hydration system? Yes. The integrated side accessory ports support compatible Stilo hydration components. Can the ST5 GT Composite use a forced-air cooling system? Yes. Compatible side-air and top-air accessories allow integration with selected external cooling systems. Are the cheek pads removable? Yes. The comfort cheek pads can be removed or replaced with compatible Stilo components. Does the helmet include noise-attenuating earmuffs? Yes. Removable earmuff cushions are included to help reduce unwanted cockpit noise. What is the head shape of the ST5 GT Composite? The helmet has an Intermediate Oval interior profile. Proper fit should be confirmed by measuring and trying on the helmet. How many shell sizes does the ST5 GT Composite have? The helmet uses two exterior shell sizes. The smaller shell accommodates sizes 54 through 59, while the larger shell accommodates sizes 60 through 64 in the manufacturer's listed size options. Can I use ST5 replacement visors on an ST5.1 helmet? Stilo lists ST5 and ST5.1 visor compatibility for the corresponding shield family. Always verify the specific visor part number before ordering. Does the Stilo ST5 GT Composite include a helmet bag? Yes. A helmet bag is included with the standard helmet package. What is the difference between the ST5 GT Composite and ST5 GT Carbon? The Composite version uses fiberglass/Kevlar construction, while the Carbon model uses carbon fiber construction. Both share the modular ST5 GT design and compatible accessory systems. Is the Stilo ST5 GT Composite suitable for endurance racing? Yes. Its modular communication, hydration, and cooling compatibility make it well suited to endurance racing where the helmet's certification is accepted. Why Choose the Stilo ST5 GT Composite Racing Helmet? The Stilo ST5 GT Composite Snell SA2020 Racing Helmet delivers an outstanding combination of protective construction, comfortable interior design, excellent visibility, and integrated accessory versatility. From track-day driving to competitive endurance racing, its fiberglass/Kevlar composite shell, noise-attenuating earmuffs, wide eyeport, and modular side ports provide a configurable platform for drivers with a wide variety of racing requirements. Choose the ST5 GT Composite for proven Stilo engineering, professional motorsport performance, and the flexibility to build a helmet setup around your driving needs.

Sparco X-Light + Racing Shoes The Sparco X-Light + is the ultimate ultra-light weight racing shoe. It was designed for the top level of professional drivers looking to save weight in every possible way while maintaining safety and high performance. The X-Light + is the only racing shoe on the market featuring a full fabric upper. This unique fireproof stretch fabric was developed by Sparco engineers to be breathable and durable while maintaining heat- and flame-resistance. The X-Light + stretch fabric wraps around the foot like a second skin, preventing dust, soil, and other materials from entering the shoe. Kevlar cables woven into the upper give your foot just the right amount of support. This combination provides an extremely comfortable, highly breathable fit while offering a high level of protection. The X-Light + is also the only racing shoe on the market with a carbon fiber sole. This special carbon fiber was developed by Sparco Engineers in the Sparco OEM Seating Division. Uniquely developed to be flexible, this carbon fiber is inlayed into the sole and runs from the heel to the toe. Carbon fiber is visible through the ultra-thin, oil-resistant, antistatic sole, offering exceptional pedal sensitivity. The cushioned inner sole of the X-Light + has a unique printed silicon pattern, giving this racing shoe added traction and pedal feel. The X-Light + is available in two colors: White/Black and Blue/White, in sizes from 39 to 46. The Sparco X-Light + is FIA 8856-2018 approved. SPARCO X-LIGHT+ RACE SHOE TECHNOLOGY  FIA 8856-2018 approved Ultra-light weight fire-retardant stretch fabric and soft leather construction Highly breathable upper fits like a second skin Full carbon fiber inlayed sole is ultra thin, antistatic, oil- and fuel-resistant Printed silicon cushioned inner sole for maximum pedal feel

Sparco Prime-T Racing Shoes The Prime-T racing shoe was originally designed by Sparco for Formula One use and is currently being used by Formula One drivers. Formula One teams are always pushing for weight reductions and that push inspires innovative solutions. The Prime-T is one of the lightest race shoes available. It features a soft leather upper with a full Velcro closure system. The lightweight perforated Velcro closure covers a breathable cloth tongue which is extremely comfortable. The Prime-T has the next generation sole made in pure lightweight rubber which enhances the pedal feel and is also anti-static, fuel and oil resistant. The sole is was designed with a stiff setting for vehicles that require maximum pedal force for braking.  The Prime-T is available in European sizes 37-48 and is FIA approved. SPARCO PRIME -T RACE SHOE TECHNOLOGY Ultra-lightweight soft leather construction Velcro closure system Stiff sole for maximum pedal feel FIA approved 8856-2018

Stand21 Porsche Motorsport Air-S Speed Racing Shoe (FIA 8856-2000) Officially Licensed Porsche Motorsport Gear  The Stand21 Air-S Speed is, without exception, the lightest, most breathable and most comfortable racing shoe we've ever worn. The uppers are supple and breathable without sacrificing safety or durability. The stiff, oil-resistant soles are amazingly responsive, transmitting pedal feel at an incredible level. These are the first racing shoes we didn't want to take off immediately after a long stint -- they're that comfortable. The premium materials and superior craftsmanship are what we've come to expect from a brand like Stand21. The Porsche Motorsport embroidery is spectacular, a must-have for any Porsche enthusiast. STAND21 PORSCHE MOTORSPORT AIR-S RACE SHOE FEATURES Stretchable and breathable fire-retardant fabric Reinforced stiffened heel box Curved sole around the heel EVA Micro-Cellular material shock-absorbing heel Ergonomic, anti-vibration ATV hydrocarbon resistant sole Edge-to-edge assembly avoiding stuck shoes Firm hold by lacing up to the ankle FIA 8856-2000 and SFI 3.3/5 homologated US sizes 9.0 to 13.0

Sparco X-Light Racing Shoes The lightweight X-Light shoe was developed using feedback from Sparco’s professional drivers. This development program created some unique features for the new shoe. The X-light does not have a traditional tongue, it uses a durable fabric called Jaquard that acts as an upper stretch panel. This unique upper gives ultimate comfort as the shoe can stretch and breath. The same Jaquard material is on the backside of the shoe where it allows the Achilles unrestricted movement. The X-Light has the next generation sole made in pure lightweight rubber which enhances the pedal feel and is also anti-static, fuel and oil resistant. The mid-boot design features a full ultra-soft calf skin leather upper with perforated vents. The X-Light has a pre-formed cushioned insole. The X-Light is available in four colors: White/Red, Blue/White, Grey/Orange and Black in European sizes 37-48. The Sparco X-Light is FIA approved. SPARCO X-LIGHT RACE SHOE TECHNOLOGY  Unique stretch tongue upper panel Ultra-soft calf skin leather mid-boot design with Achilles stretch panel for mobility and comfort Pre-formed cushioned insole Next-gen sole in pure lightweight rubber for excellent pedal feel Anti-static, fuel and oil resistant sole Speed laces and standard laces included FIA approved  

Competition Motorsport Titanium Wheel Lug Bolts for BMW Fits All Modern BMWs Using 12x1.50 or 14x1.25 Threaded Lug Bolts Competition Motorsport Titanium Lug Bolts come in sets of 10 for your BMW. They are machined from aerospace-grade Ti-6Al-4V titanium alloy for superior strength exceptionally light weight (45% lighter than high-strength steel). Competition Motorsport Titanium Lug Bolts feature rolled threads -- never cut -- for for superior strength, precision, and durability. Titanium Bolts In OEM and Plus Lengths For Wheel Spacers OEM lengths are used for cars with no added wheel spacers. Longer sizes are available for those using wheel spacers. Just choose the thickness of your spacers and we'll size the appropriate titanium lug bolts. Features and Specs of Competition Motorsport Titanium Lug Bolts Grade 5 Ti-6AL-4V Titanium Alloy: Yield Strength: 128,000 psi Ultimate Tensile Strength: 138,000 psi Shear Strength: 79,800 psi Density: 0.160 lb/in3 Extremely high resistance to corrosion Low heat conductivity. NOTE Competition Motorsport Titanium Lug Bolts for BMW are sold in sets of ten (10) lug bolts. Two sets of lug bolts are required for one complete car.

Sparco Arrow Nomex Gloves The Sparco Arrow racing glove provides incredible grip and superior comfort. The palm is printed with high-grip HTX, a Sparco patented material that increases grip, comfort and dexterity. HTX is strategically placed for maximum steering feel and performance. Another Sparco-exclusive feature is Touch-S technology, a Touch Sensitive index finger and thumb. Sparco's patented fire resistant touch sensitive material allows you to use your touch screen data acquisition electronics or phone lap timer apps without taking off your gloves. The Arrow is ultra-lightweight with pre-curved fingers, external stitching and a unique inner thumb seam that gives unparalleled comfort on long stints. Available in Black/White, Black/Red, Navy, White, and Red. The Sparco Arrow is both FIA and SFI approved. SPARCO ARROW NOMEX GLOVE TECHNOLOGY  Touch Sensitive finger tips compatible with touch screen data acquisition and lap timer apps Anatomically correct seamless palm that contours to the natural shape of the hand Printed high-grip HTX palm, a Sparco-exclusive material that increases grip, comfort and dexterity External seams and unique inner thumb seam for extreme comfort FIA and SFI approved SPARCO ARROW NOMEX GLOVE SIZE CHART

Sparco Tide Nomex Gloves The Sparco Tide is a revolutionary racing glove, utilizing cutting-edge technology to provide incredible grip, excellent shock absorption, and superior comfort. Featuring an anatomically correct palm that contours to the natural shape of your hand, the palm of the Tide glove is made from advanced 3D HTX, a Sparco-exclusive material that increases grip, absorbs vibrations and increases dexterity. The hollow “volcano” shape of the HTX material is specially arranged to increase durability. Another Sparco-exclusive feature is Touch-S technology, a “Touch Sensitive” index finger and thumb. Sparco's patented fire resistant touch sensitive material allows you to use your touch screen data acquisition electronics or phone lap timer apps without taking off your gloves. Externally-stitched seams reduce pressure points on your fingers, and an elastic wrist gives you a secure, comfortable fit. Available in Black/Red, Black/Orange, White/Black, Red/Black and Blue/White. The Sparco Tide is FIA and SFI approved. SPARCO TIDE AUTO RACE GLOVE TECHNOLOGY “Touch Sensitive” finger tips compatible with touch screen data acquisition and lap timer apps. Anatomically correct palm that contours to the natural shape of the hand Advanced 3D HTX, a Sparco-exclusive material that increases grip, absorbs vibrations and increases dexterity The hollow volcano shape of the HTX material was specially arranged to increase durability A padded knuckle area provides additional comfort and protection when hands are bent FIA and SFI Approved SPARCO TIDE AUTO RACE GLOVE SIZE CHART

OMP ONE-S Racing Gloves FIA 8856-2018 HOMOLOGATED Featuring freshly-redesigned graphics and the latest FIA 8856-2018 rating, OMP's restyled lightweight ONE-S Racing Gloves boast the ultra comfortable pre-curved design and external stitching that has made them one of our top sellers (and a staff favorite). Thin silicone inserts, re-engineered for better ergonomics, are printed directly onto the palm. OMP's diagonal cut gauntlet is a subtly great feature, giving the driver unobstructed performance. The strapless design uses an elastic wrist band for increased comfort and very easy on/off. OMP ONE-S AUTO RACING GLOVE CONSTRUCTION Palm has fire-retardant, silicon rubber inserts proven to give optimal grip and sensitivity. Diagonal cut on the gauntlet and elastic band on the wrists. External seams for maximum comfort. Pre-curved design for optimal comfort. Grip inserts are strategically located in order to decrease bunching. OMP ONE-S AUTO RACING GLOVE PROTECTION Certified to the new FIA 8856-2018 homologation standard. Interior is sprayed with latex for improved grip and resistance. Extended cuff length in accordance with new FIA homologation standards for maximum protection against fire and heat. OMP ONE-S AUTO RACING GLOVE SIZE CHART

Sabelt Hero Pro TB-10 Racing Shoes The Sabelt Hero Pro TB-10 is a racing shoe at the pinnacle of motorsport shoe design. Its hallmarks of greatness: sleek styling, supple leather, and a sole that lets you feel the fine details of feedback through your pedals. The exceptional Hero Pro TB-10 combines Sabelt’s many years of racing experience with modern design and ultra-premium materials. The result is an exceptional racing shoe that maximizes the interface between car and driver. SABELT HERO TB-10 RACING SHOE FEATURES: FIA 8856-2018 certified Supple, ultra-lightweight Italian leather for exceptional style and comfort. Custom sole construction for weight reduction and unmatched grip.

Sparco Land Classic Nomex Gloves The Land Classic is Sparco's Land glove in vintage color schemes. The Land Classics is an entry-level competition glove that provides excellent protection and feedback. The ergonomic palm design with reinforced stitching conforms to the hand’s position. The palm has been redesigned with new suede anti-slip fingertip and palm grips to provide greater performance. The elastic wrist and wide range of sizes helps ensure proper fitment. The Land Classic is SFI and FIA approved. SPARCO LAND CLASSIC NOMEX GLOVE TECHNOLOGY Ergonomic palm design with reinforced stitching conforms to the hand’s position New suede anti-slip fingertip and palm grips provide greater performance Available in Cream or Navy SFI and FIA 8856-2018 approved SPARCO LAND CLASSIC NOMEX GLOVE SIZE CHART