GiroDisc Racing Brakes & Technologies
Girodisc A1-268 Front Rotors for Toyota GR Corolla & GR Yaris
$1,100.00
Girodisc A1-268 Front Rotors for Toyota GR Corolla & GR Yaris
FITMENT:
Toyota GR Corolla (2023+), front
Toyota GR Yaris (2020+), front
This Girodisc two-piece rotor set is a direct replacement for the front rotors on the Toyota Corolla GR. Girodisc two-piece, fully floating rotor assemblies help shed unsprung weight and rotating mass from the front axle of the Toyota Corolla GR, while being far more durable in track use.
American Made With Specially Formulated Materials
Girodisc rotor rings are machined from a proprietary casting made of high-carbon steel formulated to Girodisc’s specifications. This superior metallurgy results in a rotor that holds up better, and the 72 curved vanes act as a centrifugal pump pulling air in through the hub to effectively cool the rotors under hard use. The two-piece design means the reusable hat which can be attached to new rotor rings (part number D1-268) when the latter need to be replaced.
All major components including the hats, rotor rings, and drive pins are manufactured in-house at the Girodisc facility in Bellingham, WA, from domestically-sourced materials. The hat is made from 6061-T6 aluminum and coated in a black anodized finish. The drive pins are made from a high-strength steel alloy and cadmium-plated for corrosion resistance. All rotors are assembled with spring clips and Belleville washers for race-ready float while also being street-friendly with no noise from loose hardware.
We also recommend replacing them if a crack leads to the edge of the ring.
Sold and priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Pagid
Pagid 8299 Racing Brake Pads
from $363.88
Pagid Racing Brake Pad Shape 8299
Pagid 8299 Brake Pad Fitment Guide
Make
Model
Years
Front
Rear
Toyota
GR Corolla
2023
X
Toyota
GR Yaris
2020
X
Pagid Racing Brakes
Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits.
Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted.
Pagid RSL 29 Compound
The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.
Pagid RST 3 Compound
RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.
Pagid RST 5E Compound
Specifically designed and developed for high friction level sprint applications where an extreme thermal stability is demanded. Comes in a variety of different pad shapes common on GT racing front axles, touring car front axles, and rally racing especially FIA Rally3, Rally2, Rally1, and RX Rallycross categories.
Its enhanced fade resistance as well as the highest initial bite and friction level of the PAGID Racing compound portfolio make it suitable for thermally high-loaded applications, and make the RST 5E a top-end sprint equipment in terms of performance. Due to its OTM feature, the generated heat remains in the brake pad and is not transmitted into the brake fluid. RST 5E delivers the ideal balance between maximum performance and modulation.
Pagid
Pagid 8300 Racing Brake Pads
from $337.33
Pagid Racing Brake Pad Shape 8300
Pagid 8300 Brake Pad Fitment Guide
Make
Model
Years
Front
Rear
Toyota
GR Corolla
2023
X
Toyota
GR Yaris
2020
X
Pagid Racing Brake Pads
Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits.
Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted.
RSL 29 Compound
The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.
Pagid RST 3 Compound
RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.
Pagid RST 5E Compound
Specifically designed and developed for high friction level sprint applications where an extreme thermal stability is demanded. Comes in a variety of different pad shapes common on GT racing front axles, touring car front axles, and rally racing especially FIA Rally3, Rally2, Rally1, and RX Rallycross categories.
Its enhanced fade resistance as well as the highest initial bite and friction level of the PAGID Racing compound portfolio make it suitable for thermally high-loaded applications, and make the RST 5E a top-end sprint equipment in terms of performance. Due to its OTM feature, the generated heat remains in the brake pad and is not transmitted into the brake fluid. RST 5E delivers the ideal balance between maximum performance and modulation.
