ChillOut Systems Rapid Release Kit and Rapid Release Shirt Handle
Chillout Systems ChillOut Systems Rapid Release Kit and Rapid Release Shirt Handle from $75.00
ChillOut Systems Rapid Release Kit The Rapid Release dry break system makes driver changes fast and effortless. No fumbling with tubes or connectors while under pressure, just a quick press and coolant/water starts flowing instantly. In an emergency, the connectors release when a force greater than 10 lbs is applied.The kit comes with two style car mounts, a roll bar mount and a flat surface mount which connects to the cooling system. Also included is a driver-side handle that quickly connects your shirt or balaclava to the car mount already fixed in the car.The car mounts can be fitted to the roll bar with the roll bar mount whereas the flat mount can be mounted in various places like the transmission tunnel, seat, etc  via the flat-mount. CHILLOUT RAPID RELEASE KIT FEATURES Effortless dry break system Emergency release feature INCLUDED WITH CHILLOUT RAPID RELEASE KIT 2 x 1/4" barbed quick release fittings 1 x flat surface mount 1 x roll-bar mount 1 x driver side handle 2 x 36" reinforced, non-kinking extensions 2 x 1/4th to 5/16th barrel connectors 2 x 1/4th to 1/4th barrel connectors ChillOut Systems Rapid Release Handle Kit for Cooling Shirt The ChillOut Systems Rapid Release dry break system makes driver changes fast and effortless. No more fumbling with two tube connectors that always rotate into the hardest position to release. ChillOut Systems Rapid Release Handle Kit for Cooling Shirt Details: Manufacturer: ChillOut Systems Manufacturer Part Number: RRHS Material: Lightweight composite Cooling hose side or shirt side: Shirt side ChillOut Systems Rapid Release Handle Kit for Cooling Shirt Components: 2 x 1/4" barbed quick release fittings 1 x driver side handle With the simplest of designs that works every time, a quick press and the Chillout coolant formula starts flowing instantly. To disconnect or in an emergency, the ChillOut Systems rapid release handle kit for cooling shirts automatically releases when a force greater than 10lb is applied.
Chillout Systems Wiring Harness
Chillout Systems Chillout Systems Wiring Harness $75.00
Chillout Systems Wiring Harness This 10 AWG wiring harness features a 10-foot shock-resistant rubber power cord wrapped in a protective textile fabric. Overall length is 14 feet.
Chillout Systems 4
Chillout Systems Chillout Systems 4" 285 CFM Blower $65.00
Chillout Systems 4-Inch 285 CFM Blower Chillout 4-inch 285 CFM blower offers high air output at a low 4.7 amp draw. Lightweight composite ABS housing makes the Chillout 4" blower the most powerful and reliable in its class. CHILLOUT 4-INCH BLOWER FEATURES 285 cubic feet per minute (CFM) 4.7 Amps 12 Volts Lightweight, durable, and ultra-reliable
MagLock Air Helmet Side Only Kit
FluidLogic MagLock Air Helmet Side Only Kit $59.95
Maglock Helmet Side Air Kit Maglock Air hose NOT included Maglock Air - Helmet Side Only Kit   What's included with the helmet side air kit: Maglock® Air Helmet side Maglock® Air Dust Cap Maglock® Visor Sticker Tool Kit
Paragon 1.5
Paragon Paragon 1.5" Air Hose (10ft) $54.99
Paragon 1.5" Air Supply Hose (10 Feet) Paragon’s 1.5” diameter x 10’ length Air Hose is designed to work with Paragon Viking Pro coolers, Viking Pro Bundles, and Air Blower Bundles. At 1.5” diameter, the Paragon Air Hose is small and flexible enough to route to your helmet without any necessary weight, giving you great head cooling while aiding in keeping fog off your visor. Paragon 1.5" Air Supply Hose Details Manufacturer: Paragon Manufacturer part no.: 02-45000 Hose OD: 1.5" Hose length: 10 feet Weight: 2 lbs.
Chillout Systems 4
Chillout Systems Chillout Systems 4" Neoprene Air Duct Hose from $49.99
Our Neoprene Air Duct Hose is extremely flexible, pliable and structurally strong thanks to a coated spring-steel wire support helix that prevents it from collapsing. The fiberglass fabric cover and fiberglass cord are both impregnated and coated with neoprene rubber.With a temperature range between -45 F to 330 F, this makes it ideal for most applications, most importantly bringing fresh/cool air to your Quantum Cooler. Also perfect for cockpit cooling and other low-pressure ducting applications where extreme heat can't be avoided. Under-hood applications such as connecting an air intake to an airbox, or an airbox to a throttle body are also great uses.FEATURES: 4" Interior Diameter 330 F Heat Resistance
BELL Cover plate & FORCED AIR low profile nozzle for HP6/GT6 helmet
Bell BELL Cover plate & FORCED AIR low profile nozzle for HP6/GT6 helmet $49.95
BELL Cover plate & FORCED AIR low profile nozzle for HP6/GT6 helmet   Kit consist of:1 Pcs FORCED LOW PROFILE NOZZLE (Clear)1 Pcs COVER PLATE2 Sets* SEAL KIT *Each SEAL KIT set contains 2 pieces of 20 x 80mm and 2 pieces of 20 x 120mm.
Chillout Systems 3
Chillout Systems Chillout Systems 3" Air Duct Plenum $48.00
Chillout Systems 3" Air Duct Plenum Chillout Motorsports 3" Air Duct Plenum connects to your Cooling System, efficiently increasing cooling performance whilst simultaneously reducing amp draw from your electrical system. The plenum is designed to fit the intake side of your Quantum Cooler, allowing for much cooler air to be forced through the system via the 3" duct. A 200 CFM blower (Minimum) is required in conjunction with the plenum for the best performance.The 3" Air Duct Plenum attaches via the plenum holder found on the front of the Quantum Cooler systems (V2 and above), creating a seal to keep the cooler pressurized with the cool air. Forcing cool air through the system and out through the exhaust side of the cooler is the most efficient way to reach maximum cooling - no wasted cool air, and the cooling shirt system appreciates every bit of cool air it can get.INCLUDED WITH THE CHILLOUT 3" PLENUM 3" Air Duct Plenum
Image of Chollout System Cooler Mount Tray
Chillout Systems Chillout Systems Mounting Trays from $45.00
Chillout System mounting trays are available in steel and carbon fiber for the Quantum V3, Quantum Pro, Cypher and Cypher Pro Ultra-Lite.  Chillout Systems Mounting Tray Details: Manufacturer: Chillout Systems Manufacturer part number steel for Quantum V3: QCMP-1 Manufacturer part number carbon for Quantum V3: QCMP-2 Manufacturer part number carbon for Quantum Pro Cooler: QCMP-Pro Manufacturer part number carbon for Cypher and Cypher Pro Ultra-Lite: BPCF-3 ChillOut systems include a mounting plate, but if you are running a race team with a back-up chassis, or want a lightweight upgrade, the Chillout Systems mounting trays make moving the critical components from car to car fast and easy.
Image of Chillout Systems 3
Chillout Systems Chillout Systems 3" Neoprene Air Duct Hose from $41.00
Chillout Systems Neoprene 3" Air Duct Hose is used to direct cooling air into a Chillout Systems cooler or take the coolers heated exhaust air and exit outside of the interior compartment. Flexible, pliable and structurally strong thanks to a coated spring-steel wire support helix that prevents it from collapsing the fiberglass fabric cover and fiberglass cord are both impregnated and coated with neoprene rubber. Chillout Systems 3" Neoprene Air Duct Hose Details: Manufacturer: Chillout Systems Manufacturer part number 6 Foot: CH-ADH3i6 Manufacturer part number 12 Foot: CH-ADH3i12 Inside diameter: 3" Temperature range: -45°F to 330°F With a temperature range between -45 F to 330 F, this makes it ideal for most applications, most importantly bringing fresh/cool air to your Quantum Cooler. Also perfect for cockpit cooling and other low-pressure ducting applications where extreme heat can't be avoided. Under-hood applications such as connecting an air intake to an airbox, or an airbox to a throttle body are also great uses.
Paragon Arctic Wolf/Fox Battery Charger
Paragon Paragon Arctic Wolf/Fox Battery Charger $38.99
Paragon 4.4AH Li-Ion Arctic Wolf/Fox Battery Paragon’s Wolf/Fox Battery Charger is designed for use with the Paragon Arctic Wolf/Fox Li-Ion Battery. The Arctic Wolf/Fox Battery Charger has an indicator light that illuminates bright green when your battery is fully charged. Plugs into any standard US 110-120V electrical outlet. Paragon Arctic Wolf/Fox Battery Charger Details Manufacturer: Paragon Manufacturer part no.: 03-29400 Input voltage: 110-120V Battery included: no Weight: 1 lb.
Paragon 3
Paragon Paragon 3" Air Hose (5ft) $33.99
Paragon 3.0" Air Supply Hose (5 Feet) Paragon’s 3” diameter x 5’ length Air Hose is designed to work with most NACA ducts on the market, channeling fresh air from outside the car to feed your Paragon 240 CFM blower. When connected to a Viking Pro Cooler, this provides optimized cool air flow into your helmet for excellent head cooling. Paragon 3.0" Air Supply Hose Details Manufacturer: Paragon Manufacturer part no.: 03-45000 Hose OD: 3.0" Hose length: 5 feet Weight: 2 lbs.
Paragon Blower Filter Housing Fitting (4
Paragon Paragon Blower Filter Housing Fitting (4") $31.99
Paragon 4.0" Blower Filter Housing Fitting Paragon’s 4” Blower Filter Housing Fitting is custom made for connecting Paragon’s 3” Air Hose to the 4" inlet of Paragon’s 240 CFM Air Blower. The Paragon 4” Blower Filter Housing Fitting is made to house Paragon’s Blower Air Filter Screen and Paragon’s Blower Air Filter. Each sold separately
Maglock Air Hose
FluidLogic Maglock Air Hose from $31.80
Maglock Air Hose Maglock Air hose side NOT included Maglock Air Hose is built to our exact specifications to ensure that you get the lightest, most flexible hose on the market today. The feedback from our test pilots ensures you that neck fatigue during use is greatly reduced, furthermore, this hose does not leverage or disconnect the Maglock Air in high G or high impact environments. Used by top motorsports athletes including all Andretti Indy cars.  We highly recommend our hose to be paired with Maglock Air.
Paragon Blower Hose Fitting (4
Paragon Paragon Blower Hose Fitting (4") $30.99
Paragon 4.0" Blower Hose Fitting Paragon’s 4” Blower Hose Fitting is custom made for connecting the Paragon 1.25” Air Hose to Paragon’s 240 CFM Air Blower.
Sold out
Chillout Systems 1.5 Liter Coolant Formula
Chillout Systems Chillout Systems 1.5 Liter Coolant Formula $30.00
Chillout Systems 1.5 Liter Coolant Formula This 1.5 liters of coolant will last a single racer an entire season! Non-toxic and biodegradable coolant that circulates through your Chillout Systems cooler and cooling garments, keeping you cool and your cooler running in prime condition. Does not evaporate, greatly extending the amount of time between refilling your system. Chillout cooling garments encase tubular veins within the material, covering a large surface area of the body to keep you cool, dry, and focused. We suggest you replace the Chillout Coolant in your system at least once per race season. It takes less than two minutes and keeps your cooling system running in peak condition.