CMS RF1 DOT4 Racing Brake Fluid
Competition Motorsport CMS RF1 DOT4 Racing Brake Fluid from $21.95
Real-Life High Boiling Point Without The Real High Price RF1 Racing Brake Fluid from CMS Performance is a fully-synthetic DOT4 brake fluid formulated to provide extraordinary performance under the most demanding high-temperature racing and track-day conditions. With a dry boiling point of 328º C (622º F), RF1 exceeds all DOT3 & DOT4 requirements and is compatible with all DOT 3, 4, and 5.1 fluids. (Not compatible with DOT5 or mineral-based brake fluids.) On the race track, brake systems operate at very high sustained temperatures, and there is perhaps no single safety system more important in racing than your brakes. No single part of that system is more critical than brake fluid. At CMS Performance, we got tired of (and a little nervous) using "racing" brake fluid at the race track that didn't live up to its claimed performance when things got hot. So we did something about it. Manufactured in partnership with Orthene, the brake fluid supplier to many teams in Formula 1, WEC, and other professional series, RF1 Racing Brake Fluid was formulated to maintain consistent viscosity, lubricity, and compressibility at the extreme system temperatures and line pressures found in racing and track days. The bottom line is this: you can spend more on brake fluid, but you can't buy higher-performance than RF1 Racing Brake Fluid. RF1 Racing Brake Fluid Details: Typical dry boiling point: 328º C (622º F) Typical wet boiling point: 204º C (399º F) Exceeds DOT3 & DOT4 standards Bottle size: 500 ml (16.9 fl oz) Click Here for Product MSDS Sheet A Word About Flushing Brake Fluid All brake fluid degrades over time (not mileage), attracting water as it ages, which, at high brake temperatures, can lead to fluid boil and brake fade or failure. That's why the "wet" (aged) boiling point of any brake fluid is substantially lower than the "dry" (new) boiling point. To maintain maximum braking performance, Competition Motorsport strongly suggests replacing your brake fluid before every track event, but at least every three months if you're consistently racing and/or driving at track days. It's cheap insurance against learning about brake fade the hard way!
PFC Brake Pads 0394.08.20.44 Pad Shape Image
Performance Friction Performance Friction PFC Brake Pads 0394.XX.20.44 from $379.95
Performance Friction PFC Brake Pads 0394.XX.20.44 PFC Brakes offers a wide range of sports car applications. Each PFC product is meticulously created to the highest performance and technology expectations. For PFC, we take pride in the accomplishments of the drivers and race teams that run our product. With More Championships than Any Other™, PFC are the best brakes on the market. Known around the globe in the Sports Car market, we know It’s Quicker. PFC is involved with numerous Sports Car events across the globe, including: IMSA Continental Tire Sports car Challenge  Porsche Cup Racing Pirelli World Challenge With over 35 years of friction knowledge, and on-track experience, our process enables us to provide you with the proper friction every time. NO COMPROMISES™ All PFC pad compounds have been thoroughly processed and are “Race Ready”. This means very easy burnishing to bed pads and discs.  The PFC 0394.11.16.44 and PFC 0394.08.18.44 have dominated the NASA Spec E46 class since inception. The PFC 0394 pad shape fits the front axle of the E46 non-M, M3 chassis and comes in three popular compounds, the 08, 11 and brand new 332. PFC 11 Compound A new generation sprint and medium distance friction: the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation. PFC 08 Compound One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. PFC 331 Compound 331 is the next generation of PFC endurance material. Improved control with ABS, and gentle on discs. The 331 Carbon Metallic ® compound has been developed with higher initial bite than PFC’s renowned 08 endurance compound. The 331 has improved release, and continues to offer exceptional control and feel. It boasts low wear rate and exceptional disc conditioning. 0394.xx.20.44 FITS: BMW 120d / 130i 2006-12 E81 / E87 BMW M3 incl Evo 1992-99 E36 E36-M3 BMW 330i 2000-06 E46 E46-330i BMW M3 incl CSL 2000-06 E46 E46-M3 BMW 330d / 330i 2008- E92 E92-330i BMW 5 Series 1988-95 E34 incl M5 BMW 5 Series 1995- E39 (not M5) BMW 6 Series 1982-89 E24 BMW Z3 Z3M 1992-99 E36 BMW Z3 3.2 litre 1997- Coupé / Roadster BMW Z4M 2006- E85 M Roadster & Coupé
PFC Brake Pads 0396.XX.17.44
Performance Friction PFC Brake Pads 0396.XX.17.44 from $274.95
0396.11.17.44 (11 Compound) A new generation sprint and medium distance friction compound, offering the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of a stop while giving more cold and hot bite than the endurance-oriented 08 compound. Brake with confidence; brake with ultimate control and modulation. 0396.08.17.44 (08 Compound) One of PFC's most popular compounds, the 08 came to fame in Endurance Sports Car and GT racing due to its performance in applications where smooth initial bite is a must. PFC 08 has a slight friction rise with temperature, with excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of competitors' endurance materials but with much higher bite and more consistent performance across a broad temperature range. 0396.332.17.44 (332 Compound) 332 has been formulated with lower bite and torque for rear applications.With smooth release, the 332 offers excellent stability and control.The 332 has been designed to work with ABS applications, and has exceptionally low wear rates. FITS: BMW E30 M3 BMW E36 M3 BMW E46 M3
Carbotech CT394 BMW E36 - E46 M3 Front
Carbotech Brakes Carbotech CT394 BMW E36 - E46 M3 Front from $194.00
Carbotech CT394 BMW E36 / E46 M3 Front Front BMW E36 & E46 M3 Carbotech Brake Pads are available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. Carbotech CT394 BMW E36 / E46 M3 Front Details: Manufacturer: Carbotech Manufacturer part number: CT394 Compounds available: 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 Most popular track combination: R10 Front, R8 Rear Carbotech cross reference: 394 Hawk cross reference: HB135 Material thickness of pad and backing plate: 16mm [img-15381-left-large_default] BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. [img-15381-left-large_default] Carbotech CT394 BMW E36 / E46 M3 Front also fits: 1987 BMW 735I NO SUBMODEL ALL (1987, 1987) 1988 BMW 735I NO SUBMODEL ALL (1988, 1988) 1988 BMW 735IL NO SUBMODEL ALL (1988, 1988) 1988 BMW 750IL NO SUBMODEL ALL (1988, 1988) 1989 BMW 525I NO SUBMODEL ALL (1989, 1989) 1989 BMW 735I NO SUBMODEL ALL (1989, 1989) 1989 BMW 735IL NO SUBMODEL ALL (1989, 1989) 1989 BMW 750IL NO SUBMODEL ALL (1989, 1989) 1990 BMW 525I NO SUBMODEL ALL (1990, 1990) 1990 BMW 735I NO SUBMODEL ALL (1990, 1990) 1990 BMW 735IL NO SUBMODEL ALL (1990, 1990) 1990 BMW 750IL NO SUBMODEL ALL (1990, 1990) 1991 BMW 525I NO SUBMODEL ALL (1991, 1991) 1991 BMW 735I NO SUBMODEL ALL (1991, 1991) 1991 BMW 735IL NO SUBMODEL ALL (1991, 1991) 1991 BMW 750IL NO SUBMODEL ALL (1991, 1991) 1991 BMW M5 NO SUBMODEL ALL (1991, 1991) 1992 BMW 525I NO SUBMODEL ALL (1992, 1992) 1992 BMW 735IL NO SUBMODEL ALL (1992, 1992) 1992 BMW 750IL NO SUBMODEL ALL (1992, 1992) 1992 BMW M5 NO SUBMODEL ALL (1992, 1992) 1993 BMW 525I NO SUBMODEL ALL (1993, 1993) 1993 BMW 740I NO SUBMODEL ALL (1993, 1993) 1993 BMW 750IL NO SUBMODEL ALL (1993, 1993) 1993 BMW M5 NO SUBMODEL ALL (1993, 1993) 1994 BMW 525I NO SUBMODEL ALL (1994, 1994) 1994 BMW 740I NO SUBMODEL ALL (1994, 1994) 1994 BMW 750IL NO SUBMODEL ALL (1994, 1994) 1995 BMW 525I NO SUBMODEL ALL (1995, 1995) 1995 BMW M3 NO SUBMODEL ALL (1995, 1995) 1996 BMW 528 SERIES E39; SEDAN #N/A (1996) 1996 BMW M3 NO SUBMODEL ALL (1996, 1996) 1997 BMW 528 SERIES E39; SEDAN #N/A (1997) 1997 BMW 528I E39; SEDAN (1997, 1997) 1997 BMW 528I NO SUBMODEL ALL (1997, 1997) 1997 BMW M3 NO SUBMODEL ALL (1997, 1997) 1998 BMW 528 SERIES E39; SEDAN #N/A (1998) 1998 BMW 528 SERIES E39; TOURING #N/A (1998) 1998 BMW 528I E39; SEDAN (1998, 1998) 1998 BMW 528I E39; TOURING (1998, 1998) 1998 BMW 528I NO SUBMODEL ALL (1998, 1998) 1998 BMW M3 NO SUBMODEL ALL (1998, 1998) 1998 BMW Z3 M ROADSTER ALL (1998, 1998) 1999 BMW 528 SERIES E39; SEDAN #N/A (1999) 1999 BMW 528 SERIES E39; TOURING #N/A (1999) 1999 BMW 528I E39; SEDAN (1999, 1999) 1999 BMW 528I E39; TOURING (1999, 1999) 1999 BMW M3 NO SUBMODEL ALL (1999, 1999) 1999 BMW Z3 M COUPE ALL (1999, 1999) 1999 BMW Z3 M ROADSTER ALL (1999, 1999) 2000 BMW 528 SERIES E39; SEDAN #N/A (2000) 2000 BMW 528 SERIES E39; TOURING #N/A (2000) 2000 BMW 528I E39; SEDAN (2000, 2000) 2000 BMW 528I E39; TOURING (2000, 2000) 2000 BMW Z3 M COUPE ALL (2000, 2000) 2000 BMW Z3 M ROADSTER ALL (2000, 2000) 2001 BMW 525 SERIES SEDAN #N/A (2001) 2001 BMW 525 SERIES TOURING #N/A (2001) 2001 BMW 525I SEDAN (2001, 2001) 2001 BMW 525I TOURING (2001, 2001) 2001 BMW M3 NO SUBMODEL ALL (2001, 2001) 2001 BMW Z3 M COUPE ALL (2001, 2001) 2001 BMW Z3 M ROADSTER ALL (2001, 2001) 2002 BMW 525 SERIES SEDAN #N/A (2002) 2002 BMW 525 SERIES TOURING #N/A (2002) 2002 BMW 525I SEDAN (2002, 2002) 2002 BMW 525I TOURING (2002, 2002) 2002 BMW M3 NO SUBMODEL ALL (2002, 2002) 2002 BMW Z3 M COUPE ALL (2002, 2002) 2002 BMW Z3 M ROADSTER ALL (2002, 2002) 2003 BMW 525 SERIES SEDAN #N/A (2003) 2003 BMW 525 SERIES TOURING #N/A (2003) 2003 BMW 525I SEDAN (2003, 2003) 2003 BMW 525I TOURING (2003, 2003) 2004 BMW 525 SERIES MANUAL TRANSMISSION #N/A (2004) 2004 BMW 525I MANUAL TRANSMISSION (2004, 2004) 2005 BMW 525 SERIES MANUAL TRANSMISSION #N/A (2005) 2005 BMW 525I MANUAL TRANSMISSION (2005, 2005) [img-15381-left-large_default]
Girodisc Pad Spreader GDPS01
Girodisc Girodisc Pad Spreader GDPS01 $250.00
Girodisc Brake Pad Spreader This indispensable tool is used by race teams, shops, and enthusiasts alike who have high performance four- and six-piston calipers. The spreader is designed to spread brake pads and pistons in four- and six-piston calipers to facilitate quick replacement of pads and/or rotors in a shop or racing environment.No more screwdrivers, pliers, hammers, or C-clamps! This tool will retract the pistons evenly and all the way back into their bores with one squeeze of the levers. The Girodisc spreader was designed around popular four-piston and six-piston calipers from Brembo, AP Racing, Alcon, and other performance calipers in racing and road use. To help fit in any caliper, the amount of throw is adjustable.Insert the spreading plates one way for wider six-piston calipers, then turn the spreader 90o and use the plate sides for four-piston calipers.The Girodisc Pad Spreader is made from heavy-gauge steel and is powder-coated for durability. The slider is cadmium-plated, and nylon pivot bushings ensure smooth action. The Girodisc Pad Spreader will quickly become an invaluable tool for any race team, shop, or enthusiast who changes pads and rotors with any frequency.
Carbotech CT683 E46 M3 Rear Brake Pads
Carbotech Brakes Carbotech CT683 E46 M3 Rear Brake Pads from $152.00
Carbotech CT683 E46 M3 Rear Brake Pads Carbotech CT683 brake pads are available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, and XP24 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT683 Brake Pad Details: Manufacturer: Carbotech Manufacturer Part Number: CT683 Hawk Crossover: HB518 [img-14259-left-large_default] Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT683 Brake Pad Rear Axle Fitment: 2000-2006 M3 Rear 2000-2004 M5 Rear [img-14259-left-large_default]
Pagid Racing Brake Pads No. 1295
Pagid Pagid Racing Brake Pads No. 1295 from $349.95
    Fits These Vehicles: Make Model Build (Year) Front Rear Alfa Romeo 156 2.0 16V 95 - 98 X   BMW 120d & 130i [E81 & E87] 03 - 12 X   BMW 330i [E46] 00 - 05 X   BMW M3 [E36] 3.0 & 3.2 92 - 99 X   BMW M3 [E46] & M3 CSL 00 - 07 X   BMW M5 [E34] 88 - 97 X   BMW Z3 M Roadster 3.2i 97 - 03 X   BMW Z4 M Coupe 06 - X     RS 14:   The PAGID RS14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying.   RST 1: PAGID RST1 is a high average friction, aggressive pad with instant pedal response, quick release, a firm pedal at all temperatures, and a progressive torque curve. Suitable for applications with high down-force and/or very high grip.  RSL 1:  PAGID RSL1 is a complex formulation of ceramic materials. Compared to metallic compounds, it has superior thermal insulation and higher heat resistance. It is a medium-friction compound that is rotor friendly and was designed to meet the latest ecological standards in endurance racing.    
Brembo Brakes Front 355x32 GT-R - Six Pistons (M3 E46, Z4 M-Coupe)
Brembo Brembo Brakes Front 355x32 GT-R - Six Pistons (M3 E46, Z4 M-Coupe) $8,395.00
ÄãThe most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware. Single block calipers in billet aluminium with racing characteristics: lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing. Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick. Pads provide optimum performance in various driving conditions The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.
Brembo Brakes Front 380x32 GT-R - Six Pistons (M3 E46, Z4 M-Coupe)
Brembo Brembo Brakes Front 380x32 GT-R - Six Pistons (M3 E46, Z4 M-Coupe) $8,995.00
ÄãThe most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware. Single block calipers in billet aluminium with racing characteristics: lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing. Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick. Pads provide optimum performance in various driving conditions The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.
Brembo Brakes Rear 345x38 GT-R - Four Pistons (M3 E46, Z4 M-Coupe)
Brembo Brembo Brakes Rear 345x38 GT-R - Four Pistons (M3 E46, Z4 M-Coupe) $7,695.00
ÄãThe most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware. Single block calipers in billet aluminium with racing characteristics: lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing. Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick. Pads provide optimum performance in various driving conditions The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.
Brembo Brakes Front 355x32 Six Piston (M3 E46, Z4 E85 E86)
Brembo Brembo Brakes Front 355x32 Six Piston (M3 E46, Z4 E85 E86) $3,995.00
Brembo Front 355x32 Rotors and Six-Piston Calipers FITS: BMW M3 (E46) BMW Z4 (E85) BMW Z4 (E86) For Drivers Who Demand the Utmost From Their Car Designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars, these kits offer superlative performance for both everyday driving and demanding track -ay sessions. Brembo kits consist of cross-drilled or slotted, ventilated two-piece discs and aluminium calipers with six pistons; a complete set of high performance pads; metal-braided hoses; and high quality hardware. Solutions and Technologies Born on the Race Track Braking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology. The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monoblock components, combined with cross-drilled or slotted one-piece or composite oversized discs. Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model. The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%.Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, T√úV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More Braking Torque and Thermal Capacity on Track Using radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-Catching and Unique Looks With a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd. Catering to the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads.
Brembo Brakes Front 355x32 Rotors + Four Piston (M3 E46, Z4)
Brembo Brembo Brakes Front 355x32 Rotors + Four Piston (M3 E46, Z4) $3,795.00
Brembo 355x32 Two-Piece Iron Rotors and Four-Piston Calipers FITS: BMW M3 (E46) 2000-2006 BMW Z4 Roadster (E85) 2002-2008 BMW Z4 Coupe (E86) 2006-2008 For Drivers Who Demand the Utmost From Their Car Designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars, these kits offer superlative performance for both everyday driving and demanding track-day sessions. Brembo kits consist of cross-drilled or slotted, ventilated two-piece discs and aluminium calipers with four pistons; a complete set of high performance pads; metal-braided hoses; and high quality hardware. Solutions and Technologies Born on the Race Track Braking systems consisting of motorsports-derived components offering levels of technology and performance without par on the market today and embodying the purest expression of Brembo's state-of-the-art technology. The kit consists of aluminium calipers with opposed pistons which, depending on the car model and in increasing order of performance, may be composite, monoblock or even billet monobloc components, combined with cross-drilled or slotted one-piece or composite oversized discs. Brembo kits combine the best solutions available to offer the perfect solution for the individual characteristics of each model. The heart of the kit consists of aluminium calipers. These are also available as monoblock parts machined from a single billet of cast aluminium, which ensure outstanding rigidity and minimised deformation. The discs supplied in the kit, which may either be floating or one-piece, depending on the specific car model, feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled and slotted finishes are designed and executed with meticulous precision. These holes or slots in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for each application, T√úV/DOT homologated metal-braided hoses, an adapter and high-quality fastener hardware complete the kit. More Braking Torque and Thermal Capacity on Track Using radial-mounted fixed calipers together with oversized discs gives the system greater braking torque and superior thermal capacity. The result is a braking action that is noticeably more immediate and decisive even in normal road usage, and is extraordinarily powerful and consistent under the repeated loads of track use. Fixed calipers improve the durability and efficiency of the system: the opposed multiple pistons act on the pads with more precision, due to the smaller piston diameter and the reduced pressure exerted on each individual piston, while the greater overall surface area between the pads and pistons results in more uniform friction surface wear. The superlative stiffness of the calipers and the metal braided hoses reduce brake fluid absorption. The result is improved, more stable brake pedal pressure, making it possible to modulate braking force more precisely and enhancing pedal feel. Featuring a hat in aluminium alloy, the oversized floating disc system reduces unsprung mass (for improved handling) and thermal stress. The mounting system is engineered to permit a greater degree of both radial and axial float. This characteristic, together with the greater dimensions of the braking rotor surface, improves the dispersion of the heat generated by the repeated, intense thermal stress that the discs are subjected to, for consistent braking performance and pedal feel even after numerous laps on the track. Eye-Catching and Unique Looks With a combination of painted calipers (available in red, black or silver) flaunting the Brembo logo, and slotted or cross-drilled discs, the Gran Turismo kit gives an unmistakably sporty, eye-catching look to the car, offering that extra special touch for drivers who want their vehicle to stand out from the crowd. Catering to the more discerning driver is the GT-R line of kits. These offer even more performance and consist of billet-monoblock calipers, slotted discs in diameters up to 405 mm and special high performance pads. KIT DETAILS: Brembo GT-M Systems Caliper Body: Monobloc Radial Mount Caliper Colors: Black, Red, or Silver Number of Pistons: 4 Disc Size and Construction: 355mm x 32mm Cast Iron Disc Type: Drilled or Slotted Disc Vane Design: Vented Straight Vane Disc Material: Cast Iron Disc to Hat Mounting: Floating H-Bobbin with Anti Rattle Spring Front or Rear System: FRONT Goodridge Stainless Steel brake lines Brembo High-Performance Brake Pads
Image is Ferodo FCP1073Z DSUNO BMW E46 M3 Front Brake Pad Set
Ferodo Ferodo FCP1073Z DSUNO BMW E46 M3 Front Brake Pad Set $446.81
Ferodo FCP1073Z DSUNO BMW E46 M3 Front Brake Pad Set Fitting the front of the BMW E46 M3, the Ferodo FCP1073Z in the DSUNO compound is a medium torque, endurance brake pad. From the working temperature of 392 F to 1382 F, the Ferodo DSUNO features a predictable torque curve with an average friction coefficient of 0.48µ. With a wide temperature range and level torque curve, the Ferodo DSUNO is a popular mid-distance endurance race and track day pad. Ferodo FCP1073Z DSUNO Details: Manufacturer: Ferodo Manufacturer part number: FCP1073Z-N Compound: DSUNO Primary Use: Mid range endurance 6~ hours, track days Street use: No Track only: Yes Application: All vehicle types Average Coefficient of Friction: 0.48µ Temperature Range C: 200 - 750 C Temperature Range F: 392 - 1382 F Compatible with ceramic discs: No Compatible with iron discs: Yes Ferodo DSUNO Brake Compound Details:The Ferodo DSUNO is a predictable mid-endurance compound designed for repeatable stopping, lap after lap. Featuring one of the flattest torque curves of the Ferodo brake pad line, the Ferodo DSUNO is a mid-distance endurance compound with an average coefficient of friction of 0.48µ across the workable range of 392 to 1382 F. The cold friction profile of the Ferodo DSUNO is low, proper bedding and warm-up is recommended for optimum performance all the way to its maximum 1382 F limit. The Ferodo DSUNO is a popular choice in brake pads for many track drivers and endurance racers. Ferodo FCP1073Z DSUNO BMW E46 Front Brake Pad Fitment: Fits: BMW E46 M3 Front Most popular track combination: Matched Set DSUNO Front & Rear Ferodo FCP10737Z Dsuno Fitment Guide Front Axle: 2006 BMW M3 E46 Competition Pkg 2006 BMW M3 E46 non-Competition Pkg 2005 BMW M3 E46 Coupe 2004 BMW M3 E46 Coupe 2003 BMW M3 E46 Coupe 2002 BMW M3 E46 2001 BMW M3 E46
Image of Ferodo FCP1073G DS3.12 BMW E46 M3 Front Brake Pads
Ferodo Ferodo FCP1073G DS3.12 BMW E46 M3 Front Brake Pads $464.76
Ferodo FCP1073G DS3.12 BMW E46 Front Brake Pad Set Fitting the font of the BMW E46 M3, the Ferodo Ferodo FCP1073G in the DS3.12 compound brake pad has the flattest torque curve across the largest temperature range with very high torque for repeatable stops, lap after lap. Ferodo FCP1073G DS3.12 BMW E46 Front Brake Pad Set Details: Manufacturer: Ferodo Manufacturer part number: FCP-FCP1073G-N Primary Use: Endurance Race Application: Downforce Touring Car, Extreme GT, Time Atack Highest friction coefficient and bite in the Ferodo Racing range Reproducible and stable performance up to 850 C under all pressure and speed conditions Excellent management of ABS during the brake event Longest pad life of Ferodo Racing range under heavy duty track use Recommended for track use on larger vehicles with ABS Ferodo DS3.12 Brake Compound Details: The Ferodo DS3.12 is a track only compound with the flattest torque curve across the largest temperature range with very high torque. The Ferodo DS3.12 is identified with production code "G" and is the latest evolution in the Ferodo's DS track-only brake pad line. Designed for Hyper, Super and modern sports cars that have increased horsepower, more aero, higher curb weight, and stickier tires.These attributes all place greater demands on the vehicle’s ABS system. The Ferodo DS3.12 is the modern pad compound designed from the start to explicitly handle those demands. Out of all the pad compounds we have ever tested, even from manufacturers, the DS3.12 shows the flattest torque curve across the broadest temperature range. That means that on every turn, on every track you drive, on every lap, your brake pedal is going to feel almost exactly the same, providing tremendous consistency and repeatability. The DS3.12 has a higher mu than all of Ferodo’s other compounds, so not as much leg pressure is required to initiate the desired response. It is also unfadable, showing no drop in performance at any temp your brakes will ever see. In dyno testing, the DS3.12 has shown superior wear rates to the other Ferodo compounds, while remaining kind to the discs. We believe the DS3.12 will become the gold standard to which other race compounds will be compared. Ferodo FCP1073G DS3.12 BMW E46 Front Brake Pad Fitment: Fits: BMW E46 Front Most popular track combination: Matched Set DS3.12 Front & Rear Ferodo FCP10737G DS3.12 Complete Fitment Guide: 2006 BMW M3 E46 Competition Pkg 2006 BMW M3 E46 non-Competition Pkg 2005 BMW M3 E46 Coupe 2004 BMW M3 E46 Coupe 2003 BMW M3 E46 Coupe 2002 BMW M3 E46 2001 BMW M3 E46
Image of Ferodo FCP1073W DS1.11 BMW E46 M3 Front Brake Pads
Ferodo Ferodo FCP1073W DS1.11 BMW E46 M3 Front Brake Pads $446.81
Ferodo FCP1073W DS1.11 BMW E46 Front Brake Pads Fitting the front of the BMW E46 M3, the Ferodo FCP1073W in the DS1.11 compound is a long duration endurance race pad that is also used in the Red Group of advanced track day drivers. Featuring a flat torque curve with an intermediate profile, the Ferodo DS1.11 is repeatable across the entire temperature range, making it a great choice for many track drivers. Ferodo FCP1073W DS1.11 Details: Manufacturer: Ferodo Manufacturer part number: FCP 1348W-N Primary Use: Heavy Duty Endurance Application: All vehicle types Average Coefficient of Friction: 0.46µ Temperature Range C: 200 - 750 C Temperature Range F: 392 - 1382 F Ferodo DS1.11 Brake Compound Details:The Ferodo DS1.11 is a long duration endurance pad with an incredible flat torque curve across the workable range of 392 to 1382 . Designed to put you on the podium of your next World Racing League race, the Ferodo DS1.11 is a track only pad that is designed for repeatable stopping performance and feel across a very wide temperature spectrum. The Ferodo DS1.11 brake compound makes the chassis repeatable in every brake zone, lap after lap. The cold friction profile of the Ferodo DS1.11 is predictable and grows linear as your pad heats up with very good fade resistance all the way to its maximum 1382 F limit. Another common use of the Ferodo DS1.11 is an advanced track day driver in the red group in a well set-up chassis with sticky rubber and aero. Ferodo FCP10737W DS1.11 Complete Fitment Guide: 2006 BMW M3 E46 Competition Pkg 2006 BMW M3 E46 non-Competition Pkg 2005 BMW M3 E46 Coupe 2004 BMW M3 E46 Coupe 2003 BMW M3 E46 Coupe 2002 BMW M3 E46 2001 BMW M3 E46