-15% sale
Sabelt TG-12 Hypertouch black racing glove on a white background
Sabelt Hero TG-12 Hypertouch Gloves $229.46 $269.95
Sabelt Hypertouch TG-12 Auto Racing Gloves The Sabelt Hypertouch TG-12 Auto Racing Gloves combine certified fire-resistant protection, dependable steering-wheel grip, touchscreen compatibility, and an updated ergonomic fit. Designed for competitive motorsport, the TG-12 gives drivers the control and comfort needed for racing, endurance events, track days, and performance driving. A silicone-infused palm helps provide a secure connection with the steering wheel, while the reinforced internal palm improves durability in high-contact areas. Touchscreen-compatible fingertips allow drivers to operate compatible phones, lap-timing applications, and data-acquisition displays without removing their gloves. Certified to the FIA 8856-2018 standard, the Sabelt Hypertouch TG-12 is suitable for racing organizations and events that require current FIA-approved driver equipment. Silicone Palm for Enhanced Steering-Wheel Grip The TG-12 features silicone grip material across the palm to improve traction against the steering wheel. This surface helps the driver maintain a consistent grip during braking, cornering, shifting, and rapid steering inputs. Improved palm traction can also reduce the amount of gripping pressure required to control the wheel, helping minimize hand fatigue during longer driving sessions. Touchscreen-Compatible Fingertips Touchscreen-compatible fingertips allow the driver to operate compatible electronic devices without removing the gloves. This feature is useful when adjusting data-acquisition equipment, reviewing lap times, operating mobile applications, or using a phone between sessions. Touchscreen performance may vary depending on the device, screen protector, and operating conditions. Reinforced Internal Palm A strengthened internal palm improves durability in areas exposed to frequent contact with the steering wheel. The reinforced construction helps the glove withstand repeated use while maintaining the flexibility and steering feedback required for precise vehicle control. Updated Ergonomic Fit Sabelt designed the Hypertouch TG-12 with an updated fit that follows the natural shape of the hand. The close-fitting construction helps reduce excess material and improves dexterity when operating paddle shifters, steering-wheel controls, switches, and other cockpit equipment. The extended gauntlet-style cuff provides dependable coverage and overlap with the sleeve of a compatible racing suit. Streamlined Racing Design The TG-12 features a clean, low-profile design developed for performance driving. Its shaped fingers, extended cuff, and flexible construction provide a secure racing fit without unnecessary bulk. Distinctive Sabelt branding and contrasting graphics give the gloves a professional appearance that coordinates with a wide range of racing suits and driver equipment. FIA 8856-2018 Approved Racing Protection The Sabelt Hypertouch TG-12 is homologated to the FIA 8856-2018 standard for protective clothing used in automobile competition. This certification makes the gloves appropriate for many professional, amateur, endurance, rally, road-racing, and club-level motorsport applications. Drivers should always confirm the required certification with their racing organization or sanctioning body before competition. Sabelt Hypertouch TG-12 Features Fire-resistant auto-racing glove construction FIA 8856-2018 homologated Silicone-infused palm for enhanced steering-wheel grip Touchscreen-compatible fingertips Reinforced internal palm for improved durability Updated ergonomic fit Close-fitting design improves dexterity and control Extended gauntlet cuff provides racing-suit overlap Designed for competitive and performance driving Available in multiple colors and sizes Sabelt Hypertouch TG-12 Specifications Manufacturer: Sabelt Model: Hypertouch TG-12 Product Type: Auto Racing Gloves Homologation: FIA 8856-2018 Available Sizes: 8–12 Available Colors: Black, Red, and White Manufacturer SKU: RFTG12 Ideal for Multiple Motorsport Applications The Sabelt Hypertouch TG-12 Racing Gloves are suitable for a variety of motorsport disciplines, including: Circuit racing Endurance racing Sports-car competition Touring-car racing Rally and time trials Autocross Driver instruction High-performance track driving Why Choose Sabelt Hypertouch TG-12 Racing Gloves? The Sabelt Hypertouch TG-12 provides a balanced combination of certified protection, steering-wheel grip, touchscreen functionality, durability, and comfort. Its silicone palm improves control, while the reinforced internal construction helps the gloves withstand repeated racing use. For drivers seeking an FIA-approved racing glove with modern touchscreen convenience and a close, responsive fit, the TG-12 is a strong choice for both short sprint races and extended driving sessions. Sabelt Hypertouch TG-12 Size Chart Frequently Asked Questions How should the Sabelt Hypertouch TG-12 Racing Gloves fit?The gloves should fit closely around the hands and fingers without restricting movement. There should not be excessive material at the fingertips or uncomfortable pressure across the palm. Are the Sabelt Hypertouch TG-12 Gloves FIA approved?Yes. The TG-12 is homologated to the FIA 8856-2018 standard for protective clothing used in automobile competition. Do the Sabelt TG-12 Gloves work with touchscreen devices?Yes. The gloves include touchscreen-compatible fingertips for operating compatible phones, lap timers, and data-acquisition equipment. What type of grip material is used on the palm?The TG-12 uses silicone grip material to improve traction and control against the steering wheel. Does the TG-12 have a reinforced palm?Yes. The internal palm is strengthened to improve durability in areas exposed to frequent steering-wheel contact. What sizes are available?The Sabelt Hypertouch TG-12 is available in sizes 8 through 12. What colors are available?Available color options include Black, Red, and White. Are these gloves suitable for endurance racing?Yes. The close fit, silicone palm grip, reinforced construction, and FIA-approved protection make the TG-12 suitable for endurance racing and other extended driving sessions. Can the Sabelt TG-12 Racing Gloves be washed?Follow the care instructions supplied by Sabelt. Avoid bleach, harsh detergents, high heat, and cleaning methods that could damage the fire-resistant materials or silicone grip surface.
-15% sale
Sabelt TG-11 Geckotech red racing glove with long cuff on a white background
Sabelt Hero TG-11 Geckotech Gloves $246.46 $289.95
Sabelt Geckotech TG-11 Auto Racing Gloves The Sabelt Geckotech TG-11 Auto Racing Gloves are engineered to provide FIA-certified protection, dependable steering-wheel grip, and a close, comfortable fit for competitive motorsport. Their lightweight, streamlined construction helps improve dexterity while reducing unnecessary bulk inside confined racing cockpits. A silicone-treated palm creates a secure connection with the steering wheel, while reinforced internal palm construction adds durability in high-wear areas. The updated ergonomic fit allows the gloves to follow the natural shape of the hands for improved comfort, control, and precision during demanding race conditions. FIA 8856-2018 Certified Protection The Sabelt TG-11 Geckotech Gloves are homologated to the FIA 8856-2018 standard for fire-resistant driver equipment. This certification makes them suitable for many professional, club-level, road-racing, endurance, rally, and international motorsport applications. Drivers should always confirm the required safety standard with their racing organization or sanctioning body before competition. Silicone Palm Grip The Geckotech palm uses strategically applied silicone grip material to improve contact with the steering wheel. This high-grip surface helps reduce unwanted hand movement and allows the driver to maintain accurate steering input without applying excessive gripping pressure. Improved palm traction can also help reduce hand fatigue during long races, track sessions, and high-vibration driving conditions. Reinforced Internal Palm A strengthened internal palm increases durability in the areas exposed to the greatest pressure and friction. This reinforcement helps the TG-11 withstand repeated use while maintaining the flexibility and steering-wheel feel required for competitive driving. The durable construction makes these gloves well suited for drivers who regularly participate in racing, testing, instruction, or performance track events. Updated Ergonomic Fit Sabelt developed the TG-11 with an updated fit that follows the natural shape of the hand. The close-fitting construction reduces excess material around the palm and fingers, improving dexterity and reducing distraction inside the cockpit. The streamlined design also makes it easier to operate paddle shifters, steering-wheel buttons, switches, and other controls while maintaining a secure grip. Lightweight, Streamlined Construction The Geckotech TG-11 features a clean, low-profile design developed for comfort and performance. Its lightweight construction helps preserve natural hand movement while minimizing bulky material around the fingers, palm, and wrist. This driver-focused shape provides a precise feel that is suitable for sprint races, endurance events, rally competition, time trials, autocross, and performance driving. Sabelt Geckotech TG-11 Glove Features Premium fire-resistant auto-racing glove construction FIA 8856-2018 homologated Silicone-treated palm for enhanced steering-wheel grip Reinforced internal palm for improved durability Updated ergonomic fit Streamlined construction reduces excess bulk Designed for improved dexterity and steering precision Suitable for confined racing cockpits Available in black, red, and white Available in sizes 8 through 12 Sabelt Geckotech TG-11 Specifications Manufacturer: Sabelt Model: Geckotech TG-11 SKU: RFTG11 Homologation: FIA 8856-2018 Available Sizes: 8–12 Available Colors: Black, Red, and White Ideal for Multiple Motorsport Disciplines The Sabelt TG-11 is designed for drivers who need certified fire protection and reliable control across a wide range of motorsport applications. Its silicone grip, reinforced palm, and close ergonomic fit make it suitable for circuit racing, endurance competition, rally, time trials, autocross, and performance track driving. The lightweight construction provides the control required for short sprint events while remaining comfortable enough for extended driving sessions. Why Choose Sabelt Geckotech TG-11 Racing Gloves? The Sabelt Geckotech TG-11 combines FIA-approved protection with a high-grip palm and durable driver-focused construction. Its streamlined shape minimizes bulk, while the updated ergonomic fit provides a secure and natural connection with the steering wheel. For drivers seeking a modern Sabelt racing glove with dependable grip, reinforced durability, and FIA 8856-2018 homologation, the TG-11 offers an excellent balance of protection, comfort, and control. Sabelt Geckotech TG-11 Auto Racing Glove Size Chart Frequently Asked Questions What safety certification do the Sabelt TG-11 Gloves have?The Sabelt Geckotech TG-11 Gloves are homologated to the FIA 8856-2018 standard. Do these gloves have silicone palm grip?Yes. The palm features silicone grip material designed to improve steering-wheel control and reduce unwanted hand movement. Is the palm reinforced?Yes. The internal palm is strengthened to improve durability in high-wear areas. What sizes are available?The Sabelt Geckotech TG-11 Racing Gloves are available in sizes 8 through 12. What colors are available?Available color options include black, red, and white. How should Sabelt racing gloves fit?They should fit closely around the hand and fingers without restricting movement or creating uncomfortable pressure at the fingertips. Are these gloves suitable for track days?Yes. They are suitable for racing, track days, time trials, driver instruction, and other performance-driving applications where FIA-approved gloves are preferred or required. Can the Sabelt TG-11 Gloves be washed?Follow the care instructions supplied by Sabelt. Avoid harsh detergents, bleach, high heat, or cleaning methods that could damage the fire-resistant materials.
sale
Sabelt Hero Superlight Womens TS-10 Race Suit Pink Image
Sabelt Hero Superlight Womens TS-10 Driver Race Suit from $2,081.65 $2,449.00
Sabelt Hero Superlight Women's TS-10 Driver Race Suit Light, Comfortable, and FIA 8856-2018 Approved The Sabelt Hero Superlight Women's TS-10 Driver Race Suit is a professional-level women’s racing suit designed for drivers who want ultra-lightweight comfort, modern protection, and a fit tailored specifically for female racers. Built with premium multi-layer Nomex materials, the TS-10 delivers FIA-approved safety without unnecessary bulk. At only 265 g/m², the Hero Superlight TS-10 is one of the lightest women’s driver suits available. Its slim, ergonomic cut helps reduce excess material, while stretch panels in key movement zones improve flexibility and comfort in the cockpit. Built Specifically For Women Racing Drivers Unlike many race suits that simply resize a standard men’s pattern, the Sabelt Hero Superlight Women's TS-10 is tailored for a women-specific fit. The suit is shaped for comfort while seated in a race car, helping reduce bunching, restriction, and driver fatigue. Pre-curved sleeves help maintain a natural driving position, while elastic stretch panels around the elbows, knees, and lumbar area provide added movement and ventilation during long sessions. The lower-profile collar helps reduce restriction around the neck, making the suit more comfortable during extended track time. Lightweight Multi-Layer Nomex Protection The TS-10 uses a three-layer fire-resistant construction designed to balance protection, comfort, and weight savings. The outer layer is made from an extremely light woven flame-resistant material, while the soft Nomex inner layer adds comfort against the body. A honeycomb middle layer provides insulation without adding unnecessary bulk. For maximum lightness, this women’s racing suit does not use a waist belt. Instead, the clean slim-fitting design eliminates excess seams and unnecessary material. Even the accent stripes are printed to help save weight. Sabelt Hero Superlight Women's TS-10 Details FIA 8856-2018 approved Women-specific driver race suit fit Lightweight 265 g/m² fabric construction Multi-layer fireproof Nomex materials Soft knit Nomex inner layer for comfort Honeycomb middle layer for insulation Breathable and ergonomic construction Stretch panels for comfort and mobility Full floating sleeves Anti-bunching pre-curved arms Lower-profile collar for reduced restriction Front cellphone pocket No waist belt for reduced weight Black knit wrist and ankle cuffs Printed Sabelt logo details Available in multiple color options Why Choose The Sabelt Hero Superlight Women's TS-10? The Sabelt Hero Superlight Women's TS-10 Race Suit is ideal for women drivers who want a lightweight FIA-approved suit without sacrificing comfort or professional protection. Its low weight, slim fit, stretch panels, and women-specific tailoring make it a strong choice for club racing, endurance racing, HPDE competition, and serious motorsport use. With its clean design and premium Sabelt construction, the TS-10 delivers the comfort and mobility drivers need while maintaining the safety standards required for modern racing. Sabelt Women's Race Suit Sizing Proper race suit sizing is important for both comfort and safety. The Sabelt Hero Superlight Women's TS-10 is designed with a women-specific fit, so use the Sabelt women’s size chart when selecting your size. Frequently Asked Questions Q: Is the Sabelt Hero Superlight Women's TS-10 FIA approved?A: Yes. The Sabelt Hero Superlight Women's TS-10 Driver Race Suit is FIA 8856-2018 approved for motorsport use. Q: Is this race suit made specifically for women?A: Yes. The TS-10 is tailored with a women-specific fit instead of using a resized men’s suit pattern. Q: How lightweight is the Sabelt Hero Superlight TS-10?A: The suit uses lightweight 265 g/m² fabric construction, making it one of Sabelt’s lighter professional-level women’s race suits. Q: Does the TS-10 have a waist belt?A: No. The Sabelt Hero Superlight Women's TS-10 does not use a waist belt in order to reduce weight and keep the suit slim and clean. Q: What materials are used in this suit?A: The TS-10 uses multi-layer fireproof Nomex materials, including a light woven outer layer, honeycomb insulation layer, and soft knit Nomex inner layer. Q: Is this suit comfortable for long races?A: Yes. Stretch panels, pre-curved arms, breathable construction, and a lower-profile collar help improve comfort during long sessions. Q: What colors are available?A: The Sabelt Hero Superlight Women's TS-10 is available in multiple color options, including pink, black, and white versions. Sabelt Women's Race Suit Sizing:
-15% sale
Black quilted jacket with yellow accents and Sabelt branding on a white background
Sabelt Challenge TS-2 Driver Race Suit $679.96 $799.95
Sabelt Challenge TS-2 Racing Driver Suit The Sabelt Challenge TS-2 Racing Driver Suit delivers lightweight FIA-certified protection, classic motorsport styling, and the high-quality tailoring Sabelt is known for. Weighing just 360 g/m², the Challenge TS-2 is even lighter than its predecessor, making it a strong choice for drivers who want comfort, mobility, and reliable fire-resistant performance. Built with a Nomex fire-retardant anti-bubbling external layer, this Sabelt race suit is designed for serious track use while maintaining a clean, traditional racing look. The lower-profile collar improves comfort around the neck, while pre-curved arms and full-floating sleeves help reduce restriction behind the wheel. Whether you are racing, testing, or spending long sessions in the car, the Challenge TS-2 is made to move naturally with the driver. Lightweight FIA-Certified Race Suit The Sabelt Challenge TS-2 is FIA 8856-2018 certified, meeting modern safety requirements for auto racing competition. Its lightweight 360 g/m² construction helps reduce bulk without sacrificing the protection expected from a professional-grade racing suit. Designed for Driver Comfort and Mobility Sabelt designed the Challenge TS-2 with several driver-focused features, including full-floating sleeves, pre-curved arms, an internal elastic waist band, and an outer waist belt. These details help improve fit, comfort, and freedom of movement while seated in a race car. Sabelt Challenge TS-2 Driver Suit Details FIA 8856-2018 certified racing driver suit Lightweight 360 g/m² fabric construction Nomex fire-retardant anti-bubbling external layer Low-profile collar for improved comfort Pre-curved arms for natural driving position Full-floating sleeves for improved range of motion Internal elastic waist band Adjustable outer waist belt External pockets Hidden shoulder handles under embroidered Sabelt logos Available in EU sizes 46 to 66 Available colors: Black/White, Black/Yellow, Red, White, and Blue Why Choose the Sabelt Challenge TS-2 Racing Suit? The Challenge TS-2 is ideal for drivers looking for a lightweight FIA race suit with traditional styling, modern safety certification, and Sabelt’s refined fit. With its combination of fire-resistant Nomex construction, mobility-focused sleeve design, and clean color options, the TS-2 is a versatile choice for club racers, HPDE drivers moving into competition, and experienced racers who want reliable performance without unnecessary bulk. Sabelt Challenge TS-2 Race Suit FAQs Is the Sabelt Challenge TS-2 FIA certified?Yes, the Sabelt Challenge TS-2 Racing Driver Suit is FIA 8856-2018 certified. How much does the Sabelt Challenge TS-2 weigh?The Challenge TS-2 has a lightweight fabric weight of 360 g/m². What material is used in the Sabelt Challenge TS-2?The suit uses a Nomex fire-retardant anti-bubbling external layer designed for motorsport use. What sizes are available?The Sabelt Challenge TS-2 is available in EU sizes 46 to 66, which approximately correspond to US sizes 36 to 56. What colors does the Challenge TS-2 come in?Available colors include Black/White, Black/Yellow, Red, White, and Blue. Does the Sabelt Challenge TS-2 have floating sleeves?Yes, the suit features full-floating sleeves to improve range of motion while driving.
-15% sale
Sabelt custom black skeleton racing suit half image with white rib cage graphic, Sabelt shoulder logos, and clean white Shopify-ready background.
Sabelt Custom Superlight TS-10 Driver Race Suit $2,970.75 $3,495.00
Sabelt Custom Superlight TS-10 Driver Race Suit The Sabelt Custom Superlight TS-10 Driver Race Suit is built for drivers who want the lightest possible FIA-approved fire suit with a fully personalized design and fit. If you have ever wanted a race suit tailored to your body, designed around your livery, and customized with your name, flag, colors, logos, and sponsor branding, the Sabelt Custom Superlight TS-10 delivers a true professional-level solution. The Sabelt Superlight TS-10 is one of the lightest driver race suits available, with a fabric weight of only 265 g/m² while still meeting the latest FIA 8856-2018 homologation for modern motorsport safety. The custom version allows you to choose primary, secondary, and tertiary colors, select thread colors if desired, and add custom logos, manufacturer logos, series logos, driver details, and more. Sabelt Custom Superlight TS-10 Race Suit Options Name on suit Country flag on suit Belt on suit Choice of slim or regular fit Cooling shirt tube pass-through: none, left, or right Boot-cut or standard cuff Pockets: none, normal, and/or cellphone Sponsor logos printed or embroidered Custom colors, patterns, and thread colors Manufacturer, sponsor, team, and series logo placement Standard Sabelt Superlight TS-10 Race Suit Features FIA 8856-2018 approved Ultra-lightweight 265 g/m² fabric construction Full floating sleeves for improved range of motion Large stretch panel in the lumbar and hip areas Driver cooling tube pass-through on the left hip Cellphone pocket on the front right thigh Pre-curved arms for comfort in the driving position Professional motorsport fit and construction Fully Custom Race Suit Design The Sabelt Custom Superlight TS-10 can be designed around your racing program, team branding, car livery, sponsor package, or personal style. You can select your colors, add logos, adjust design elements, and configure suit options to create a finished product that looks professional and fits your exact needs. Whether you compete in IMSA, WEC, Ferrari Challenge, Porsche Sprint Challenge, SCCA, NASA, or another racing series, Discovery Parts can help guide the custom suit process. We understand how series logos, manufacturer logos, and sponsor placement need to be handled for a clean, compliant, professional appearance. If you are not competing in a pro or semi-pro series, the Sabelt Custom Superlight TS-10 is still an excellent choice for drivers who want a premium custom fire suit built to match their car, helmet, team colors, or personal livery. Without series compliance requirements, the design possibilities are wide open. Lightweight Performance And Driver Comfort At only 265 g/m², the Superlight TS-10 is designed for drivers who want reduced weight without sacrificing certified fire protection. Full floating sleeves, pre-curved arms, and stretch panels in the lumbar and hip areas help the suit move naturally with the driver while seated in the car. The result is a lightweight custom race suit built for long sessions, endurance events, sprint racing, and serious track use. Important Pricing And Ordering Information The Sabelt Custom Superlight TS-10 Driver Race Suit is a special-order product and is estimated to ship in approximately two to three weeks. Returns are not accepted on special-order custom suits. The standard price includes basic customization, colors, and patterns. After your order is placed, a custom suit specialist from Discovery Parts will contact you to confirm your sizing, color selections, series compliance needs, logo placement, and other design details. You will be sent a measurement chart and may submit photos of your car livery, sponsor logos, example suits, or other references to help create the artwork for your custom suit. A proof will be sent for review, revisions, and approval, typically within two to three business days. Once the final design, colors, sizing, logos, and options are approved, the final cost of your custom suit will be confirmed with a supplemental invoice. Final pricing may vary based on the number of logos, design complexity, custom colors, embroidery, and additional options selected. Sabelt Custom Superlight TS-10 Driver Race Suit FAQs Is the Sabelt Custom Superlight TS-10 FIA approved?Yes, the Sabelt Superlight TS-10 is FIA 8856-2018 approved. How light is the Sabelt Superlight TS-10?The suit has a fabric weight of only 265 g/m², making it an extremely lightweight FIA-approved driver suit. Can I choose custom colors?Yes, you can choose primary, secondary, and tertiary colors, and thread colors may also be selected if desired. Can sponsor logos be added?Yes, sponsor logos, manufacturer logos, series logos, team logos, and custom branding can be added to the suit. Can logos be printed or embroidered?Yes, sponsor logos and other graphics can be printed or embroidered depending on the design and option selected. Can the suit be made to fit me?Yes, the suit can be configured with custom measurement information and fit preferences, including slim or regular fit. How long does a custom Sabelt TS-10 suit take to ship?The estimated ship time is approximately two to three weeks after the design, sizing, and custom options are approved. Are custom Sabelt suits returnable?No, custom and special-order suits are not eligible for return once ordered.
-15% sale
Sabelt Enduro Platinum 6 point Racing harness Image
Sabelt Enduro Platinum 2" 6-Point FIA Harness $1,784.96 $2,099.95
Premium FIA Racing Restraint for Endurance, GT and High-Level Track Cars The Sabelt Enduro Platinum Full 2" is designed for drivers who want more than basic FIA compliance from their restraint system. This six-point harness combines Sabelt's top-level endurance hardware with a compact, driver-focused design built around fast adjustment, clean cockpit packaging, and compatibility with modern frontal head restraint systems. What separates the Enduro Platinum from a conventional racing harness is not one oversized feature. It is the collection of small engineering decisions that make the harness easier to live with once it is installed in a real race car: a billet-machined camlock, pull-down lap adjustment positioned close to the driver, full 2-inch shoulder webbing, compact sub-belt integration, and lightweight hardware designed for serious competition use. For endurance racers, multi-driver teams, and owners building premium GT or track cars, the Enduro Platinum is one of Sabelt's most complete restraint systems. What Makes the Enduro Platinum Different? Nearly every properly selected FIA racing harness has the same basic job: hold the driver securely in position and manage occupant loads during an impact. The differences between entry-level and flagship systems are often found in how well the harness integrates into the cockpit and how easily the driver can use it. The Enduro Platinum is engineered around those details. The lap belts use pull-down adjustment close to the center buckle, making them easier to access once the driver is seated. The center camlock is machined rather than treated as generic hardware. The 2-inch shoulder belts are well suited to modern HANS and FHR devices. The overall package is compact and deliberate, which matters in cars with deep side bolsters, halo seats, narrow cockpits, or multiple drivers sharing the same seating position. Sabelt Enduro Platinum Key Features FIA 8853-2016 homologated six-point racing harness Full 2-inch belt configuration 2-inch shoulder belts designed for modern FHR and HANS use Billet-machined lightweight camlock assembly Guided buckle-entry design for easier belt-tongue engagement Integrated pull-down lap-belt adjusters Lap adjustment located close to the center buckle Compact sub-belt integration Lightweight shoulder-belt hardware High-visibility adjustment loops Shoulder-area grip treatment to help belt positioning Designed for endurance, GT, touring, and professional motorsport use Available in Black, Blue, and Red Easy Adjustment Is More Important Than It Sounds A harness that is difficult to adjust is inconvenient in any race car. In a multi-driver endurance car, it can become a real problem. Different drivers often require substantially different lap and shoulder settings. One driver may sit low and close to the wheel while another may need more seat travel or a different seating position. During a pit stop, the incoming driver and crew need to make those adjustments quickly and confidently. The Enduro Platinum's lap adjusters are positioned near the buckle, where they remain accessible even when the driver is surrounded by deep seat bolsters and cockpit hardware. Instead of reaching toward an adjuster buried near the side of the seat, the driver can tighten the lap section using a natural pull-down motion. This is one of the most useful characteristics of the Platinum and one of the biggest reasons it makes sense for cars shared by multiple drivers. Why Lap-Belt Position Matters The lap belts are designed to restrain the pelvis, not the abdomen. For that reason, both mounting geometry and adjustment are critical. A properly positioned lap section should sit low across the driver's pelvis and remain securely tensioned. If the belt is difficult to reach or tighten once the driver is seated, achieving that position can become more difficult than it needs to be. Sabelt's pull-down configuration gives the driver direct access to the lap adjustment area, making it easier to fine-tune fit after settling into the seat. For a premium restraint system, ease of adjustment is not simply a convenience feature. It supports more consistent belt positioning every time the car goes on track. Billet Camlock and Premium Hardware The center buckle is one of the defining features of the Enduro Platinum. Sabelt uses a billet-machined camlock designed to reduce unnecessary bulk while providing a precise, high-quality engagement point for the harness tongues. The buckle-entry areas are shaped to help guide the tongues into position, which is particularly useful when the driver or crew member is working by feel rather than looking directly at the buckle. This kind of refinement becomes noticeable in cars where the harness is frequently connected, released, and adjusted. Why Pay More for Better Hardware? The answer is not simply appearance or weight. Premium hardware improves the way the system functions in daily use. A cleaner buckle, accessible adjusters, and reduced component bulk make the harness easier to operate and easier to package inside a crowded cockpit. If you only need FIA compliance, less expensive harnesses exist. If you want a more refined restraint system that feels engineered rather than assembled, the Platinum begins to justify its price. Designed Around Modern HANS and FHR Devices The Enduro Platinum uses 2-inch shoulder belts rather than the wider 3-inch shoulder webbing found on many traditional harnesses. That narrower belt width is well suited to the contact surface of modern frontal head restraint systems. The belt sits naturally on the shoulder section of a HANS-style device and avoids the excess width associated with older harness designs. Sabelt also incorporates grip treatment in the shoulder area to help the belts remain positioned on the FHR device during use. For drivers already using a modern helmet, racing seat, and FHR, the 2-inch configuration provides a cleaner overall restraint package. Where the Enduro Platinum Makes the Most Sense Endurance Racing This is the Platinum's natural environment. Driver changes place a premium on adjustment speed, accessibility, and ease of engagement. The harness is designed with those exact situations in mind. GT and Touring Cars Deep racing seats and narrow cockpit openings can make traditional belt adjusters difficult to reach. The Platinum's more central adjustment points work particularly well in these installations. High-End Track Cars A properly prepared Porsche, BMW, Corvette, Ferrari, Lotus, Radical, or similar track car can benefit from the same compact packaging and premium hardware even when it is not being used in long-distance competition. Shared Driver Cars If multiple drivers regularly use the same car, the ability to quickly change belt tension and fit can make the Platinum considerably more useful than a conventional fixed-adjustment harness. Professional and Club Racing The Enduro Platinum is appropriate for professional-level builds but is not limited to professional competition. It can also make sense in serious club-racing cars where the owner wants top-level equipment and ergonomics. Technical Specifications Specification Details Manufacturer Sabelt Model Enduro Platinum Full 2" Harness Type 6-Point Homologation FIA 8853-2016 Shoulder Belt Width 2" Lap Belt Width 2" Sub-Belt Width 2" Lap Adjustment Pull-Down Camlock Billet-Machined Lightweight Assembly FHR Compatible Yes Primary Use Endurance, GT, Touring and Track Competition Colors Black, Blue, Red Is the Enduro Platinum the Right Harness for You? The Enduro Platinum is not automatically the best harness for every driver. If you are building a straightforward club-racing car and primarily need an FIA 8853-2016 restraint system at the lowest practical cost, you may be better served by a less expensive Sabelt model. The Platinum becomes the better choice when you value: Faster adjustment between drivers Compact cockpit packaging Premium machined hardware Easy-access lap adjusters Modern 2-inch FHR-friendly shoulder belts Reduced bulk around the buckle area Professional-level fit and finish Those features are especially valuable in endurance cars, high-end track builds, and vehicles where the rest of the safety system has already been selected at a similar level. Enduro Platinum vs. a Conventional FIA Harness Feature Sabelt Enduro Platinum Typical FIA Harness FIA Homologation FIA 8853-2016 Varies by Model Shoulder Belt Width Full 2" 2" or 3" Lap Adjustment Integrated Pull-Down Varies Center Buckle Billet-Machined Premium Camlock Conventional Camlock Driver-Change Focus High Varies Cockpit Packaging Compact and Endurance Focused Standard Best Use Endurance, GT, Premium Track Builds General Competition Use The key takeaway is that the Platinum's value is not simply its FIA label. The premium lies in how the harness functions once installed. Installation and Compatibility A high-end harness still depends on correct installation. Before ordering, verify that your racing seat, roll structure or harness bar, floor mounting points, and driver position can accommodate a six-point harness with the correct geometry. Shoulder-Belt Routing The shoulder belts should pass cleanly through the racing seat and terminate at approved structural mounting points. Correct routing is important for both driver restraint and proper interaction with the FHR device. Lap-Belt Routing The lap belts must sit low across the pelvis and route through the appropriate seat openings without being forced upward by the seat shell or bolsters. Sub-Belt Routing The anti-submarine belts must pass through the correct openings beneath the driver and attach to suitable structural mounting points. Their angle and position are part of the overall restraint geometry. Think of the Harness as One Part of a System The harness should be selected together with the racing seat, seat mounts, FHR device, helmet, rollover protection, driver nets, and seating position. A restraint system works best when all of those components are designed to work together. Discovery Parts Expert Tip Before choosing a harness, sit in the car with your seat, HANS device, helmet, and normal driving gear and determine where the lap adjusters will actually end up. On many deeply bolstered seats, conventional adjusters can disappear between the driver and the seat shell. That makes tightening the belts unnecessarily difficult. If your cockpit is narrow or your car is shared by multiple drivers, the Enduro Platinum's buckle-side pull-down adjustment can be one of its most valuable features. Frequently Asked Questions Is the Sabelt Enduro Platinum FIA homologated? Yes. The Enduro Platinum Full 2" is homologated to FIA 8853-2016. Always verify that this standard is accepted by your race series or sanctioning organization. Is this a six-point harness? Yes. It uses two shoulder belts, two lap belts, and two anti-submarine belts. Is the Enduro Platinum compatible with HANS devices? Yes. The full 2-inch shoulder configuration is particularly well suited to modern HANS and other frontal head restraint systems. Why does Sabelt use 2-inch shoulder belts? The narrower shoulder webbing sits naturally on the bearing surface of modern FHR devices and creates a cleaner interface than wider traditional shoulder belts. What does pull-down adjustment mean? It refers to the direction the free end of the lap belt is pulled to tighten the harness. On the Platinum, the adjusters are positioned near the center buckle and the driver pulls downward and away from the buckle. Is the Enduro Platinum intended only for endurance racing? No. Endurance racing is where its design advantages are most obvious, but it can also be an excellent choice for GT cars, club-racing cars, and premium track vehicles. Is it worth the price for HPDE? That depends on the car and how it is used. For a basic HPDE build, a less expensive FIA harness may make more sense. For a high-end track car, a shared-driver vehicle, or a cockpit where adjustment access is difficult, the Platinum can be easier to justify. What is special about the camlock? The Platinum uses a billet-machined lightweight camlock with a guided entry design intended to make engaging the belt tongues easier. Can more than one driver use the harness? Yes. Multi-driver use is one of the strongest applications for the Platinum because its adjustment system makes belt changes between drivers easier. Can the Enduro Platinum be installed with a factory seat? It is intended to be used as part of a properly prepared motorsport restraint system with a compatible racing seat, appropriate mounting points, and other required safety equipment. Do I need a harness bar? The shoulder belts require suitable structural mounting. Depending on the vehicle, that may be a harness bar, cage tube, or another approved mounting solution. Can I use the harness without an FHR device? Harness use should be evaluated as part of the complete safety system and according to the rules of your event. For modern competition use, an appropriate FHR device is strongly recommended. Does an FIA racing harness expire? Harness validity depends on the FIA label and the rules of your sanctioning organization. Always check the specific harness label and current event regulations. Should the harness be replaced after a crash? Any harness involved in a significant impact should be inspected in accordance with manufacturer and sanctioning-body guidance. Replace it if there is any doubt about the condition of the webbing, stitching, buckle, adjusters, or hardware. What colors are available? The Enduro Platinum is available in Black, Blue, and Red, subject to inventory availability. Why Buy from Discovery Parts? Choosing the right harness is not just about matching a certification number. Belt width, adjustment direction, mounting geometry, racing seat design, FHR compatibility, and cockpit space all affect which system makes the most sense for your car. Discovery Parts can help you compare the Enduro Platinum with other Sabelt harnesses and alternative restraint systems so you can choose based on your actual installation and type of driving. If you know the Platinum is the right fit, select your preferred color and order online. If you are still comparing options, contact us with your vehicle, racing seat, and intended use and we can help narrow down the right configuration. Should You Choose the Sabelt Enduro Platinum? Choose the Enduro Platinum if you want Sabelt's highest-level endurance restraint system and place real value on adjustment access, compact hardware, FHR integration, and cockpit refinement. It is not the least expensive way to install an FIA 8853-2016 harness, and that is not what it is trying to be. The Platinum is for the driver who wants the harness to work as well in the car as it looks on the specification sheet. For endurance teams, shared-driver cars, premium GT builds, and serious track vehicles, that distinction can be worth the investment.
-15% sale
Sabelt UI-600 Nomex Shirt (Regular Fit) - Discovery Parts Limited Edition
Sabelt UI-600 Nomex Shirt (Regular Fit) - Discovery Parts Limited Edition $169.96 $199.95
Sabelt UI-600 Nomex Shirt   Discovery Parts Limited Edition The Sabelt UI-600 Nomex Shirt (Regular Fit) – Discovery Parts Limited Edition combines FIA 8856-2018 certified fire protection with premium comfort and modern stretch-fit construction. This limited edition version features an exclusive Discovery Parts logo and is available only while supplies last. Lightweight comfort with professional-grade fire protection Features FIA 8856-2018 certified for full compliance with international fire safety standards. Stretch-fit, nearly seamless construction ensures a comfortable, performance-driven fit for all body types. Made from Lenzing FR fibers derived from natural raw materials for superior moisture management and cooling performance. Incorporates modacrylic and elastane for total flexibility and long-lasting shape retention under intense heat and movement. Lightweight two-way stretch warp knit fabric delivers high wear resistance and unmatched breathability. Exclusive Discovery Parts Limited Edition—produced in limited quantities and never to be restocked. Sabelt UI-600 Nomex Shirt FAQs: Is the Sabelt UI-600 Nomex Shirt FIA approved? Yes, it’s fully certified under FIA 8856-2018, meeting the latest fire safety standards for motorsports. What makes the Discovery Parts Limited Edition unique? This version includes the Discovery Parts logo and is part of a one-time production run. Is this shirt lightweight and breathable? Absolutely. The advanced Lenzing FR and warp knit fabric ensure cool, dry comfort even under race suits. Does this shirt have a compression or regular fit? This is the regular fit model—designed for comfort and mobility during long stints. Can I machine wash the UI-600 shirt? Yes, wash gently in cold water and air dry to preserve fire-retardant properties and stretch integrity. Order your Sabelt UI-600 Nomex Shirt (Regular Fit) – Discovery Parts Limited Edition today and experience pro-level comfort with exclusive style while supplies last.  
-15% sale
Sabelt Lazer TB-3 Racing Shoes in white, single right-facing high-top shoe with black laces, ankle strap, Sabelt logo, perforated leather upper, and white sole.
Sabelt LASER TB-3 Race Shoe $305.15 $359.00
Sabelt LASER TB-3 Race Shoe   The Sabelt LASER TB-3 Race Shoe is a lightweight, breathable, and comfortable racing shoe engineered for serious drivers who want maximum pedal feel with FIA-approved protection. Built with an ultra-thin leather exterior, flexible construction, and FIA 8856-2018 homologation, the LASER TB-3 delivers the sensitivity and control needed for competition driving. Designed for comfort during long sessions, the LASER TB-3 combines perforated leather, integrated stretch panels, and a wide platform sole to improve airflow, fit, stability, and grip. The result is a race shoe that feels light and responsive without sacrificing support or protection. Sabelt LASER TB-3 Race Shoe Features FIA 8856-2018 homologated for motorsport competition use. Ultra-thin leather exterior designed for high pedal sensitivity. Lightweight construction helps reduce driver fatigue. Flexible chassis improves comfort and natural foot movement. Integrated stretch panels provide a glove-like fit. Wide platform sole increases stability and driving confidence. Perforated leather upper improves breathability and reduces heat buildup. Designed for precise braking, throttle modulation, and pedal control. Ideal for track days, club racing, endurance racing, and professional motorsport. Ultra-Thin Leather for Pedal Feel The LASER TB-3 uses an ultra-thin leather exterior to help drivers feel the pedals with greater precision. This construction improves sensitivity under braking and throttle inputs, making it easier to manage small pedal movements during corner entry, mid-corner balance, and acceleration. Breathable Perforated Upper Perforations throughout the leather upper help improve ventilation and reduce heat buildup inside the shoe. This added airflow makes the LASER TB-3 a strong option for hot track days, long race stints, and demanding cockpit conditions. Flexible Comfort Fit Integrated stretch panels allow the shoe to move naturally with the foot, creating a more comfortable and secure fit. The flexible construction helps reduce pressure points while maintaining the close fit racers need for confident pedal work. Wide Platform Sole for Stability The wide platform sole is designed to improve stability, grip, and overall driving confidence. It gives the driver a planted feel while maintaining the responsiveness needed for smooth throttle modulation and precise brake control. FIA 8856-2018 Approved Protection The Sabelt LASER TB-3 Race Shoe is FIA 8856-2018 homologated, making it suitable for motorsport events that require FIA-approved racing footwear. It combines modern safety compliance with the lightweight feel and comfort expected from Sabelt racing gear. Sabelt LASER TB-3 Race Shoe Specifications Approval: FIA 8856-2018 Upper Material: Ultra-thin leather Ventilation: Perforated leather upper Fit: Integrated stretch panels Sole: Wide platform sole for stability and grip Construction: Lightweight and flexible race shoe design Use: Auto racing, track days, club racing, endurance racing, and competition driving Sabelt LASER TB-3 Race Shoe Sizing Chart Sabelt LASER TB-3 Race Shoe FAQs What makes the Sabelt LASER TB-3 different from other Sabelt race shoes?The LASER TB-3 uses an ultra-thin leather shell and a wider sole platform to deliver strong pedal feel, stability, and comfort compared with bulkier racing shoe designs. Is the Sabelt LASER TB-3 suitable for endurance racing?Yes. The breathable perforated leather upper, stretch panels, and flexible construction make the LASER TB-3 comfortable for longer driving sessions and multi-hour stints. How does the sole grip feel?The wide platform sole provides strong pedal traction while still allowing smooth throttle modulation and precise pedal control. Does the Sabelt LASER TB-3 run true to size?Most drivers report a true-to-size fit. If you are between sizes and prefer a tighter race fit, sizing down may be considered. Does this shoe breathe well in hot conditions?Yes. The perforated leather upper helps improve ventilation, reducing heat and sweat buildup during warm race days. Is the Sabelt LASER TB-3 FIA approved?Yes. The Sabelt LASER TB-3 Race Shoe is FIA 8856-2018 homologated for motorsport competition use.
-32% sale
Discovery Parts Sabelt GeckoTech TG-11 racing glove in black with red and white accents, featuring Discovery Parts branding, Sabelt logo, and extended cuff, shown in a flat right-facing top view on a white background.
Discovery Parts Special Edition Gloves | Sabelt Hero TG-11 Geckotech $199.00 $289.95
Discovery Parts Special Edition – Sabelt Hero TG-11 Geckotech Gloves The Discovery Parts Special Edition Sabelt Hero TG-11 Geckotech Racing Gloves deliver FIA 8856‑2018 fireproof protection, gecko‑inspired grip, and an ergonomic fit—everything you need to stay cool and in control on the track. FIREPROOF LIKE A DRAGON'S HIDE Built to meet strict FIA 8856‑2018 standards, these gloves offer maximum flame resistance so your hands stay safeguarded under extreme heat. DISCOVERY PARTS SPECIAL EDITION TG-11 GECKOTECH GLOVE DETAILS Geckotech Grip: Silicon‑infused palms ensure an unshakable hold on the wheel, even in sweaty conditions. Ironclad Durability: Reinforced internal palm construction stands up to race after race without compromise. Ergonomic Fit: Updated design contours naturally around your hand, eliminating bulk and enhancing comfort. Aerodynamic Profile: Sleek styling reduces drag for every fraction‑of‑a‑second advantage. Precision Sizing: Available in sizes 8–12 for a customized fit. DISCOVERY PARTS SPECIAL EDITION AUTO RACING GLOVE SIZE CHART DISCOVERY PARTS SPECIAL EDITION AUTO RACING GLOVES FAQ Are these gloves genuine Sabelt Hero TG-11 Geckotech gloves? Yes! They're the result of a collaboration between Discovery Parts and Sabelt to bring you the pro features of TG-11 Geckotech racing gloves featuring the unique Discovery Parts "Star Logo" livery. Are these gloves FIA approved? Yes—they’re homologated to FIA 8856‑2018 for professional motorsport competition. What makes the Geckotech grip unique? The silicon‑infused palm mimics gecko adhesion, delivering superior control in all conditions. How does the Discovery Parts edition differ? This special edition features exclusive Discovery Parts branding alongside the proven Hero TG‑11 performance. Do these run true to size? Yes—these gloves use standard racing‑glove sizing for a consistent, accurate fit. Elevate your performance with the Special Edition Discovery Parts Sabelt Hero TG‑11 Geckotech Racing Gloves—available now and ready to take you across the finish line.
-15% sale
Sabelt-UI-100-Socks-White-Sale-Price-Best-Deal-large-Disocunt-Image
Sabelt UI-100 Nomex Socks (8856-2000) $29.75 $35.00
Sabelt UI-100 Nomex Socks The Sabelt UI-100 socks feature a blend of Aramidic (Nomex) and Viscose fibers, creating a soft, comfortable fit that performs well under all conditions. Calf length style socks for maximum protection. Made in Italy, white fabric only. FIA 8856-2010 homologated.
-15% sale
Sabelt-CFCI4118S433SU4F-Image
Sabelt Steel Saloon 4-Point Harness $262.65 $309.00
Sabelt Steel Saloon 4-Point Harness LOCK IN. PUSH HARDER. DRIVE WITH CONFIDENCE. You and your car are in perfect sync—the engine roars, the tires grip, and every corner becomes an opportunity to prove your skill. But when you’re pushing the limits on track day, safety isn’t optional. Enter the Sabelt Steel 4-Point Saloon Harness—your ultimate race-ready security system that keeps you locked in place, focused, and in full control. No more sliding around in your seat or bracing yourself against G-forces with your knee. This FIA 8854/98-approved harness features 3-inch-wide shoulder and lap straps that distribute force evenly, providing unparalleled support during high-speed cornering, heavy braking, and full-throttle acceleration. The pull-up lap strap adjustment ensures a perfect fit, while the snap hook fixings with removable shoulder strap options make it adaptable to your setup. And installation? A breeze. The included eye bolts keep everything locked down securely so you can focus on driving, not fidgeting with your harness. WHY YOU NEED THIS HARNESS ✅ Race-Proven Security – FIA 8854/98-approved for track use, meaning no compromises on safety✅ Unmatched Stability – Keeps you firmly in place, letting you focus on hitting every apex✅ Effortless Adjustments – Pull-up lap straps allow for quick, on-the-fly fine-tuning✅ Versatile Installation – Snap hook fixings with removable shoulder strap options for flexibility✅ Durable & Track-Ready – Engineered with high-strength materials to withstand serious driving forces SPECIFICATIONS Harness Type: 4-Point Strap Width: 3 inches (shoulder & lap) Adjustment Type: Pull-up lap strap for quick fine-tuning Fixings: Snap hook fixings with removable shoulder strap options Mounting Hardware: Includes eye bolts for secure attachment Certification: FIA 8854/98 approved FAQ: Q: Is this harness FIA-approved for racing?A: Absolutely! It meets FIA 8854/98 standards, making it fully compliant for competitive racing and track use. Q: Can I install this in my daily driver?A: While you technically can, this harness is designed for track-focused setups and not ideal for everyday street use. Q: Will it fit my seat setup?A: The snap hook fixings and removable shoulder straps offer great installation flexibility, making it compatible with most saloon-style race seats. Q: How do I adjust the harness for the best fit?A: The pull-up lap straps allow you to fine-tune the fit while seated, ensuring you’re locked in comfortably before you launch down the straightaway. THE MOMENT OF TRUTH: ARE YOU READY? Your car is built for performance—shouldn’t your safety gear match that level of precision? The Sabelt Steel 4-Point Saloon Harness ensures that every lap is as safe as it is exhilarating. Whether you’re chasing lap records or dialing in your racecraft, this harness is the upgrade you can’t afford to skip. Click "Add to Cart" now and experience total control on track!
-15% sale
sabelt-porsche-996-997-4-point-image
Sabelt Porsche 996 / 997 4-Point Track Day Car Harness $509.15 $599.00
Sabelt Porsche 996 / 997 4-Point Track Day Car Harness Lock In. Grip Tight. Unleash Performance. Your Porsche isn’t just a car—it’s an extension of your soul, a finely tuned beast that demands respect on the track. But let’s be real: power without control is just chaos waiting to happen. That’s where the Sabelt 4-Point Racing Harness comes in. It’s more than just a safety upgrade—it’s your ticket to a secure, controlled, and confidence-inspiring drive every time you hit the throttle. Strap in and feel the difference. The full 2-inch webbing hugs your body like a second skin, while the Formula B3 buckle locks you in with race-ready precision. Those yellow pull-down straps? They make adjustments a breeze, so you can dial in your perfect fit without missing a beat. And when it’s time to exit? The superlight quick-release adjusters ensure you’re out in a flash. And let’s talk style. This harness isn’t just track-day tough—it’s Porsche-perfect, rocking a sleek silver design with bold blue lap mounts that scream performance. Why You’ll Love It: Total Confidence – Secure yourself in place so you can focus on the apex, not bracing against G-forcesRace-Ready Adjustments – Fine-tune your fit effortlessly with the quick-adjust pull-down strapsBuilt for Performance – Premium P-Type steel fixing plates keep everything locked down tightPorsche-Specific Fit – Designed with your Porsche’s interior in mind—no guesswork, just a flawless installationTrack-Proven Durability – Sabelt’s racing pedigree ensures this harness stands up to serious driving conditions Specifications: Harness Type: 4-Point Webbing Width: Full 2-inch for superior support Buckle Type: Formula B3 racing buckle for ultimate security Adjustment: Yellow pull-down straps for easy fine-tuning Quick Release: Superlight quick-release adjusters for fast exits Mounting Plates: P-Type steel fixing plates for rock-solid installation Color Options: Red, Black and Blue Compatibility: Specifically engineered for Porsche models FAQs Q: Will this fit my Porsche without modifications?A: Absolutely! This harness is Porsche-specific, meaning it’s designed to fit without drilling or awkward mounting solutions. Just install and go! Q: Is this harness FIA or SFI certified?A: This harness is designed for track days and high-performance driving but is not FIA or SFI homologated. For sanctioned racing events, check your rulebook for compliance requirements. Q: Can I install this in a daily driver?A: You can, but keep in mind that 4-point harnesses are best suited for track use. They offer incredible support but may not be as convenient for everyday commuting. Q: How do I adjust the fit?A: The yellow pull-down straps make it super easy to fine-tune your fit even while seated—no struggling, no fuss. Ready to Take Your Driving Experience to the Next Level? Don’t settle for subpar safety. Whether you’re carving corners at the track or pushing limits on a spirited drive, the Sabelt 4-Point Racing Harness keeps you locked in, focused, and in total control. Get yours today and experience next-level confidence behind the wheel. ➡ Click the Buy Button Now—Your Porsche Deserves It!
sale
Sabelt TS-10 black and yellow half suit image with white accent panels on a clean white background
Sabelt Hero Superlight TS-10 Driver Race Suit from $2,081.65 $2,449.00
Sabelt Hero Superlight TS-10 Driver Race Suit Amazingly Light, Comfortable, and FIA 8856-2018 Certified The Sabelt Hero Superlight TS-10 Driver Race Suit is a top-of-the-line professional racing suit built for drivers who want maximum protection with minimum weight. Designed with supremely low weight in mind, the Hero TS-10 combines advanced multi-layer Nomex construction, ergonomic stretch panels, and a clean, uncluttered fit for serious motorsport competition. At only 265 g/m², the Sabelt Hero Superlight TS-10 is one of the lightest professional driver race suits in the industry. It delivers the comfort, flexibility, and safety drivers need for long stints, hot race weekends, and competitive driving environments. Custom Made-To-Measure Sizing Available The Sabelt Hero Superlight TS-10 is also available in bespoke made-to-measure sizing. Select the Custom Made to Measure sizing option when ordering, then contact Discovery Parts after checkout and we will help get you set up with your custom-sized suit. This is a great option for drivers who need a more precise fit than standard sizing can provide. Lightweight Multi-Layer Nomex Construction The Hero TS-10 Superlight Race Suit uses a carefully engineered three-layer fire-resistant construction. The outer layer is made from an extremely light woven flame-resistant material, while the inner Nomex layer is soft knit for comfort against the body. A honeycomb middle layer provides additional insulation without adding unnecessary bulk. This construction gives the TS-10 the safety performance expected from a professional FIA race suit while keeping the suit lightweight, breathable, and comfortable. Designed For Comfort In The Cockpit The Sabelt Hero Superlight TS-10 is designed around the way drivers actually sit and move in a race car. Elastic stretch panels around the knees, elbows, and lumbar area help improve freedom of movement and ventilation. Pre-curved sleeves reduce bunching while driving, and the lower-profile collar helps create a less restrictive feel around the neck. Even the knit wrist and ankle cuffs have been made lighter, further reducing bulk without sacrificing driver comfort. Make It Supremely Safe And Comfortable, Then Add Lightness For maximum lightness, the TS-10 does not use a waist belt. Its slim-fitting design eliminates unnecessary seams and excess material, helping create a cleaner fit with less weight. The understated stripe details are printed instead of sewn on to save every possible ounce. All color options include black knit wrist and ankle cuffs, black elastic stretch panels, and fire-retardant printed yellow Sabelt logo details. Optional Professionally-Sewn Arm Restraints Discovery Parts offers the option of professionally-sewn arm restraints added to the Sabelt Hero Superlight TS-10. Sewn with full Nomex thread, this option makes it much easier to keep arm restraints ready for open-wheel, open-cockpit, and other race cars where arm restraints are required. This is a clean, convenient solution for racers who need arm restraint compliance without dealing with separate loose straps. Sabelt Hero Superlight TS-10 Race Suit Details FIA 8856-2018 certified Ultra-lightweight 265 g/m² fabric construction Multi-layer fire-resistant Nomex materials Soft knit Nomex inner layer for comfort Honeycomb middle layer for added insulation Breathable ergonomic material Incorporated stretch panels for flexibility and ventilation Full-floating sleeves Anti-bunching pre-curved arms Lower-profile collar for reduced restriction Front cellphone pocket No waist belt for a cleaner, lighter fit Printed stripe details to reduce weight Black knit wrist and ankle cuffs Black elastic stretch panels Printed yellow Sabelt logo details Custom made-to-measure sizing available Optional sewn-in arm restraints available Why Choose The Sabelt Hero Superlight TS-10? The Sabelt Hero Superlight TS-10 Race Suit is built for drivers who want a premium FIA-approved racing suit with an emphasis on weight reduction, comfort, and movement. Its lightweight Nomex construction, stretch panel placement, and slim no-belt design make it an excellent choice for professional racing, club racing, endurance racing, and serious track competition. Sabelt race suits are manufactured using three layers of Nomex for added safety and protection. Different Nomex weights are used across Sabelt suit models to achieve the best balance of performance, comfort, and value. For specific questions about Sabelt race suit models, sizing, custom sizing, or sewn-in arm restraints, contact Discovery Parts at 888-748-7223. Frequently Asked Questions Q: Is the Sabelt Hero Superlight TS-10 FIA certified?A: Yes. The Sabelt Hero Superlight TS-10 Driver Race Suit is FIA 8856-2018 certified for motorsport use. Q: How light is the Sabelt Hero Superlight TS-10?A: The TS-10 uses lightweight 265 g/m² fabric construction, making it one of the lightest professional racing suits in the Sabelt lineup. Q: Is custom sizing available?A: Yes. The Sabelt Hero Superlight TS-10 is available in bespoke made-to-measure sizing. Select the Custom Made to Measure sizing option when ordering and contact Discovery Parts after checkout. Q: Does the Sabelt Hero Superlight TS-10 have a waist belt?A: No. The TS-10 does not use a waist belt in order to reduce weight and keep the fit clean and uncluttered. Q: What materials are used in the TS-10 race suit?A: The suit uses multi-layer fire-resistant Nomex materials, including a lightweight woven outer layer, soft knit Nomex inner layer, and honeycomb middle insulation layer. Q: Can arm restraints be added to this suit?A: Yes. Discovery Parts offers the option of professionally-sewn arm restraints using full Nomex thread. Q: Is the TS-10 comfortable for long races?A: Yes. Stretch panels, pre-curved sleeves, breathable construction, and a lower-profile collar help improve comfort during long stints and demanding race conditions. Q: Who is the Sabelt Hero Superlight TS-10 best for?A: It is ideal for drivers who want a lightweight FIA-approved race suit with professional protection, excellent mobility, and a clean premium fit.
sale
Sabelt TS-8 blue race suit half image with white shoulder panels, red accents, black cuffs, and clean white background.
Sabelt Universe TS-8 Driver Race Suit from $1,189.96 $1,399.95
Sabelt Universe TS-8 Driver Race Suit The Sabelt Universe TS-8 Driver Race Suit is built for serious drivers who want premium safety, comfort, and professional motorsport style in one lightweight package. Made in Italy from 100% Nomex fabric, this two-layer racing suit is FIA 8856-2018 homologated and designed for excellent mobility, breathability, and protection during demanding race conditions. Sabelt Universe TS-8 Driver Race Suit Features FIA 8856-2018 homologation for current international motorsport safety compliance. Available with SFI 3.2A/5 and SFI 3.4 certification by special request. 100% Nomex construction provides trusted fire-resistant protection. Lightweight two-layer design with approximately 310g/m² fabric weight. Breathable ergonomic material helps improve comfort during long sessions. Integrated bi-stretch panels support flexibility and a slim, tailored fit. Full floating sleeves and pre-curved arms help reduce bunching while driving. Ultrathin stitching improves comfort and gives the suit a clean professional finish. Lateral pockets provide convenient storage without disrupting the suit’s fit. Lightweight cuffs, lower neck collar, and YKK 3T zipper add comfort and durability. Embroidered Sabelt logos complete the refined race-ready appearance. Built for Professional-Level Comfort and Mobility The Sabelt Universe TS-8 is engineered to feel light, flexible, and comfortable when seated in the car. Full floating sleeves, anti-bunching pre-curved arms, and bi-stretch elastic panels help drivers move naturally through steering, shifting, and cockpit adjustments. The lower neck collar and lightweight cuffs reduce restriction, making the suit easier to wear during long race weekends. Sabelt Universe TS-8 Driver Race Suit Specifications Manufacturer: Sabelt Model: Universe TS-8 Certification: FIA 8856-2018 Optional Certification: SFI 3.2A/5 and SFI 3.4 by special request Material: 100% Nomex Layers: 2 Fabric Weight: 310g/m² Fit: Slim fit Zipper: YKK 3T Available Sizes: 44-66 Available Colors: White, Red, Black, and Blue Sabelt Universe TS-8 Driver Race Suit FAQs Is the Sabelt Universe TS-8 FIA approved?Yes. The Sabelt Universe TS-8 Driver Race Suit is FIA 8856-2018 homologated for current motorsport safety requirements. Can the Sabelt Universe TS-8 be ordered with SFI certification?Yes. The Universe TS-8 is available with SFI 3.2A/5 and SFI 3.4 certification by special request. What material is the Sabelt Universe TS-8 made from?The suit is made from 100% Nomex fabric, which is widely used in motorsports for its fire-resistant performance. Is the Sabelt Universe TS-8 a slim-fit suit?Yes. The Universe TS-8 uses a slim-fit design with ultrathin stitching and bi-stretch panels for a tailored feel without sacrificing driver mobility. Does the Sabelt Universe TS-8 help with movement in the car?Yes. Full floating sleeves, pre-curved arms, and elastic stretch panels help reduce restriction and bunching while seated in the cockpit. What sizes are available for the Sabelt Universe TS-8?The Sabelt Universe TS-8 Driver Race Suit is available in sizes 44 through 66. Choose the Sabelt Universe TS-8 Driver Race Suit for premium Italian craftsmanship, FIA-approved protection, and the lightweight comfort serious drivers need on race day.
-20% sale
sabelt-titan-racing-seat-PROFILE-VIEW-IMAGE
Sabelt Titan Max Racing Seat $791.20 $989.00
Sabelt Titan Max Racing Seat Through the years, the Sabelt Titan racing seat design was known for being simple and elegant. The new Titan maintains that tradition while introducing a more rounded design aimed at removing weight from the seat. This latest Sabelt Titan racing seat was developed in partnership with the best companies working in GT Championships. The result is a racing seat that's both light weight and incredibly comfortable. Offered in XL to accommodate a wide range of drivers, the Titan is beautifully upholstered and offers excellent breathability. It has quickly become one of our favorite racing seats. SABELT TITAN RACE SEAT FEATURES FIA 8855-1999 homologation. Standard weighs 20.9 lbs (9.5 kg). Max weighs 21.8 lbs (9.9 kg). Side bolstering to prevent lateral movement. Six-point harness ready (sub-belt hole in the bottom of the shell). High-wear velour fabric throughout. Breathable mesh 3D fabric on backrest and bottom. Anti-slip Kinderpoint fabric on shoulders.
-20% sale
Sabelt-GT-Am-Rave-Seat-Profile-Image
Sabelt GT-AM Racing Seat $2,256.00 $2,820.00
Sabelt GT-AM Racing Seat Based on the same shell shape as Sabelt's top of the range GT Pro racing seat, the Sabelt GT-AM is a professional competition seat manufactured from lightweight fiberglass, making it a more affordable option to club racing competitors. Sabelt GT-AM Offers Exceptional Safety Features The Sabelt GT-AM seat was designed to offer superb levels of safety along with exceptional comfort. Deep side bolsters not only offer excellent lateral support, but they also keep the driver's legs inside the seat structure for greater impact protection. The integral wrap-around head support helps prevent neck injuries by checking excessive lateral head movement during a crash. Deep wrap-around shoulders provide support to the upper body, reducing lateral movement. Sabelt GT-AM Makes Customized Driver Comfort Easy The Sabelt GT-AM uses removable pads constructed from high-density foam to absorb vibration and shock loads, improving comfort and reducing driver fatigue. Replacement cushions in different thicknesses are available, allowing the driver to tailor the fit of the GT-AM. The Sabelt GT-AM is compatible with all types of head-and-neck devices, including hybrid versions. Six harness slots allow the seat to be used with any type of racing harness. For FIA homologation purposes, the Sabelt GT-AM racing seat must be used with specific side mounts available in the drop-down menu. Sabelt GT-AM Racing Seat Details: FIA 8855-2021 approved Lightweight fiberglass shell One full pad set is included (Medium, Large, or X-Large) Integral wrap-around head protection Deep side bolsters provide lateral support and impact protection Additional seat pads available in different thicknesses for tailored fit Homologated for 10 years from the date of manufacturer Racing Seat Dimensions: