Carbotech CT1124 FRS-BRZ-GT86 Rear Brake Pad Set
Carbotech Brakes Carbotech CT1124 FRS-BRZ-GT86 Rear Brake Pad Set from $129.00
Carbotech CT1124 FRS/BRZ/GT86 Rear Brake Pad Set Carbotech brake pads for Subaru BRZ, Scion FRS, or Toyota GT86 Rear.  AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. This if the pad if all 2013 and 2014 BRZ, FRS or GT86 rear axles, but for the 2015 fit the vented rear disks (292mm) only If you have a 2013-2014 BRZ, FRS, GT86, this your rear pad. If you have a 2015 BRZ, FRS, GT86 with a vented rear rotor (292mm), this your rear pad. If you have a 2015 BRZ, FRS, GT86 with a solid rear rotor (277mm), then you use CTB-1114 How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT1124 Fits 2013-2014 all rear rotors: Yes Fits 2015 vented rear rotors: Yes Fits 2015 solid rear rotors: No, use CTB-1114 Brake Compounds Carbotech™ 1521™ The Carbotech™ 1521™ is our high performance street compound. The 1521™ compound is known for its release and modulation, along with unmatched rotor friendliness. 1521™ is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech™ 1521™ operating range starts out at ambient and goes up to 800°F (426°C+). 1521™ is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech™ 1521™ is NOT recommended for ANY track use. Carbotech™ AX6™ The AX6™ is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50°F to 1000°F + (10°C to 537°C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6™ for street driving as well, even though Carbotech™ doesn't recommend street driving with AX6™ due to possible elevated levels of dust and noise. AX6™ is NOT recommended as a race compound in most applications. Carbotech™ XP8™ A high torque brake compound with a wide operating temperature range of 200°F-1250°F+ (93°C to 676°C+). Carbotech™ XP8™ is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech™ does NOT recommended XP8™ as a daily driven street pad due to elevated levels of dust and noise. Carbotech™ XP8™ is a great compound on the front & rear of most open wheel and sports racers. Carbotech™ XP10™ When Carbotech™ unleashed the XP10™ to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10™ has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475°F (801°C). XP10™ still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech™ compounds so successful. Carbotech™ XP10™ is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP12™ Another highly successful XP™ series compound with an excellent initial bite, torque and fade resistance over and above the XP10™ compound. XP12™ has temperature range of 250°F to 1850°F+ (121°C to 1010°C+). The XP12™ has that excellent Carbotech™ release and modulation that has made all other Carbotech™ compounds so successful. The XP12™ is more rotor aggressive than XP10™, but compared to the competition the XP12™ is still very rotor friendly. XP12™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP20™ The latest iteration of the highly successful XP™ series of compounds. XP20™ is a step up from the highly successful XP16™ compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20™ is another major step in progression of the highly successful XP™ series line of compounds from Carbotech™. XP20™ has a temperature range of 275°F to 2000°F+ (135°C to 1093°C+). Carbotech™ XP20™ maintains our tradition of having the outstanding release and modulation that has made all other Carbotech™ compounds so successful. Carbotech™ XP20™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP24™ XP24™ is the pinnacle compound of the extremely successful XP™ Series of compounds engineered by Carbotech™. This compound is based on the same fundamentals that exist in all other Carbotech™ formulations. XP24™ has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech™ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech™ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24™ has a temperature range of 400°F to 2000°F+ (204°C to 1093°C+). Carbotech™ XP24™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech™ RP2™ The RP2™ compound was engineered for endurance racing based on our highly successful XP™ Series formulations. RP2™ has strong initial bite, a little less modulation than our XP12™, but still maintains the rotor friendliness of our XP™ series compounds. RP2™ has great fade resistance with a temperature range of 250°F to 1450°F+ (121°C to 787°C). RP2™ is as rotor friendly as our XP™ series compounds. Carbotech™ RP2™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ 913 Kelated Metallic™ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech™ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750°F.
Carbotech FRS-BRZ-GT86 w- Brembo Package Front Brake Pad Set CT929
Carbotech Brakes Carbotech FRS-BRZ-GT86 w- Brembo Package Front Brake Pad Set CT929 from $139.00
Carbotech FRS/BRZ/GT86 w/ Brembo Package Front Brake Pad Set Carbotech brake pads for the front of Subaru BRZ, Scion FRS, or Toyota GT86 with the Brembo package. AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT929 Brake Compounds Carbotech™ 1521™ The Carbotech™ 1521™ is our high performance street compound. The 1521™ compound is known for its release and modulation, along with unmatched rotor friendliness. 1521™ is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech™ 1521™ operating range starts out at ambient and goes up to 800°F (426°C+). 1521™ is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech™ 1521™ is NOT recommended for ANY track use. Carbotech™ AX6™ The AX6™ is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50°F to 1000°F + (10°C to 537°C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6™ for street driving as well, even though Carbotech™ doesn't recommend street driving with AX6™ due to possible elevated levels of dust and noise. AX6™ is NOT recommended as a race compound in most applications. Carbotech™ XP8™ A high torque brake compound with a wide operating temperature range of 200°F-1250°F+ (93°C to 676°C+). Carbotech™ XP8™ is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech™ does NOT recommended XP8™ as a daily driven street pad due to elevated levels of dust and noise. Carbotech™ XP8™ is a great compound on the front & rear of most open wheel and sports racers. Carbotech™ XP10™ When Carbotech™ unleashed the XP10™ to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10™ has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475°F (801°C). XP10™ still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech™ compounds so successful. Carbotech™ XP10™ is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP12™ Another highly successful XP™ series compound with an excellent initial bite, torque and fade resistance over and above the XP10™ compound. XP12™ has temperature range of 250°F to 1850°F+ (121°C to 1010°C+). The XP12™ has that excellent Carbotech™ release and modulation that has made all other Carbotech™ compounds so successful. The XP12™ is more rotor aggressive than XP10™, but compared to the competition the XP12™ is still very rotor friendly. XP12™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP20™ The latest iteration of the highly successful XP™ series of compounds. XP20™ is a step up from the highly successful XP16™ compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20™ is another major step in progression of the highly successful XP™ series line of compounds from Carbotech™. XP20™ has a temperature range of 275°F to 2000°F+ (135°C to 1093°C+). Carbotech™ XP20™ maintains our tradition of having the outstanding release and modulation that has made all other Carbotech™ compounds so successful. Carbotech™ XP20™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP24™ XP24™ is the pinnacle compound of the extremely successful XP™ Series of compounds engineered by Carbotech™. This compound is based on the same fundamentals that exist in all other Carbotech™ formulations. XP24™ has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech™ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech™ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24™ has a temperature range of 400°F to 2000°F+ (204°C to 1093°C+). Carbotech™ XP24™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech™ RP2™ The RP2™ compound was engineered for endurance racing based on our highly successful XP™ Series formulations. RP2™ has strong initial bite, a little less modulation than our XP12™, but still maintains the rotor friendliness of our XP™ series compounds. RP2™ has great fade resistance with a temperature range of 250°F to 1450°F+ (121°C to 787°C). RP2™ is as rotor friendly as our XP™ series compounds. Carbotech™ RP2™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ 913 Kelated Metallic™ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech™ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750°F.
Carbotech FRS-BRZ-GT86 Front Brake Pad Set CT1539
Carbotech Brakes Carbotech FRS-BRZ-GT86 Front Brake Pad Set CT1539 from $188.00
Carbotech CT1539 FRS/BRZ/GT86 Front Brake Pad Set Carbotech brake pads for Subaru BRZ, Scion FRS, or Toyota GT86 front axle. AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds.  How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT1539 Brake Compounds Carbotech™ 1521™ The Carbotech™ 1521™ is our high performance street compound. The 1521™ compound is known for its release and modulation, along with unmatched rotor friendliness. 1521™ is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech™ 1521™ operating range starts out at ambient and goes up to 800°F (426°C+). 1521™ is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech™ 1521™ is NOT recommended for ANY track use. Carbotech™ AX6™ The AX6™ is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50°F to 1000°F + (10°C to 537°C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6™ for street driving as well, even though Carbotech™ doesn't recommend street driving with AX6™ due to possible elevated levels of dust and noise. AX6™ is NOT recommended as a race compound in most applications. Carbotech™ XP8™ A high torque brake compound with a wide operating temperature range of 200°F-1250°F+ (93°C to 676°C+). Carbotech™ XP8™ is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech™ does NOT recommended XP8™ as a daily driven street pad due to elevated levels of dust and noise. Carbotech™ XP8™ is a great compound on the front & rear of most open wheel and sports racers. Carbotech™ XP10™ When Carbotech™ unleashed the XP10™ to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10™ has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475°F (801°C). XP10™ still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech™ compounds so successful. Carbotech™ XP10™ is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP12™ Another highly successful XP™ series compound with an excellent initial bite, torque and fade resistance over and above the XP10™ compound. XP12™ has temperature range of 250°F to 1850°F+ (121°C to 1010°C+). The XP12™ has that excellent Carbotech™ release and modulation that has made all other Carbotech™ compounds so successful. The XP12™ is more rotor aggressive than XP10™, but compared to the competition the XP12™ is still very rotor friendly. XP12™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP20™ The latest iteration of the highly successful XP™ series of compounds. XP20™ is a step up from the highly successful XP16™ compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20™ is another major step in progression of the highly successful XP™ series line of compounds from Carbotech™. XP20™ has a temperature range of 275°F to 2000°F+ (135°C to 1093°C+). Carbotech™ XP20™ maintains our tradition of having the outstanding release and modulation that has made all other Carbotech™ compounds so successful. Carbotech™ XP20™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP24™ XP24™ is the pinnacle compound of the extremely successful XP™ Series of compounds engineered by Carbotech™. This compound is based on the same fundamentals that exist in all other Carbotech™ formulations. XP24™ has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech™ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech™ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24™ has a temperature range of 400°F to 2000°F+ (204°C to 1093°C+). Carbotech™ XP24™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech™ RP2™ The RP2™ compound was engineered for endurance racing based on our highly successful XP™ Series formulations. RP2™ has strong initial bite, a little less modulation than our XP12™, but still maintains the rotor friendliness of our XP™ series compounds. RP2™ has great fade resistance with a temperature range of 250°F to 1450°F+ (121°C to 787°C). RP2™ is as rotor friendly as our XP™ series compounds. Carbotech™ RP2™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ 913 Kelated Metallic™ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech™ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750°F. Carbotech FRS,BRZ,GT86 CT1539 Brake Pad Set fits the front axle of: 2017 TOYOTA 86 2016 Subaru Impreza 2016 Scion FR-S 2015 Subaru XV Crosstrek 2015 Subaru Impreza 2015 SUBARU Forester 2.5i 2015 SUBARU BRZ 2015 Scion FR-S 2014 Subaru XV Crosstrek 2014 SUBARU Outback 2.5i 2014 SUBARU Outback 2.5i 2014 SUBARU Legacy 2.5i 2014 SUBARU Legacy 2.5i 2014 Subaru Impreza 2014 SUBARU Forester 2.5i 2014 SUBARU BRZ 2014 Scion FR-S 2013 Subaru XV Crosstrek 2013 SUBARU Outback 2.5i 2013 SUBARU Outback 2.5i 2013 SUBARU Legacy 2.5i 2013 SUBARU Legacy 2.5i 2013 Subaru Impreza 2013 SUBARU Forester 2013 Scion FR-S 2012 Subaru Impreza 2012 SUBARU Forester 2011 SUBARU Impreza 2011 SUBARU Forester
Ferodo FCP4187W DS1.11 Brake Pad - FR-S-BR-Z-GT86
Ferodo Ferodo FCP4187W DS1.11 Brake Pad - FR-S-BR-Z-GT86 $325.31
Ferodo FCP4187W DS1-11 Brake Pad Ferodo FCP4187W-N racing brake pads in the (W) DS1.11 Compound for experienced drivers in Ferodo's newest track only compound. The Ferodo FCP4187W-N is a great track pad, offering a little less bite, but with better longevity than Ferodo's newer DSUNO compound. The Ferodo DS2500 is among the foremost high performance track day pads in the business. It is also suitable for some light duty front and many rear pure race applications. The Ferodo DS2500, product code H, offers excellent refinement for such a high performance pad. Ferodo FCP4187W DS1-11 Brake Pad Details: Manufacturer: Ferodo Manufacturer part number: FRP4187W-N Pads in box: 4 Material thickness of pad material and backing plate: 16mm Material thickness of pad material and backing plate: .628" Use: Dual purpose, street & mild track Track day & light race use for all vehicle types Road style refinement but with race material ability to withstand heat with respect to life and µ Average friction coefficient of 0.42 over working temperature range of 20°-500° C Ferodo FCP4187W DS1-11 Brake Pad Fitment: 2013 Scion FR-S All 2014 Scion FR-S All 2015 Scion FR-S All 2013 Subaru BRZ All 2014 Subaru BRZ All 2015 Subaru BRZ All 2013 Subaru Legacy Sedan 3.6R 2017 Subaru BRZ Non-Brembo calipers 2016 Subaru BRZ All 2017 Toyota 86 Non-Brembo calipers 2016 Scion FR-S All Ferodo FCP4187W DS1-11 Brake Pad Reference: Carbotech CT1124 G-Loc GP1124 Hawk Brake: HB671_.628 We believe the above information is correct, but have not checked every brand fitment. Please verify the above part numbers before purchase.¬†
Ferodo FCP4187H DS2500 FR-S-BR-Z-GT86 Brake Pad
Ferodo Ferodo FCP4187H DS2500 FR-S-BR-Z-GT86 Brake Pad $229.08
Ferodo FCP4187H-N DS2500 Compound Ferodo FCP41857H-N in the DS2500 compound is one of the best street/track pads. No need to change to track pads and then to street pads every weekend. Now enjoy linear high-torque braking on the best of mountain rides and mild track days. The Ferodo DS2500 is among the foremost high performance track day pads in the business. It is also suitable for some light duty front and many rear pure race applications. The Ferodo DS2500, product code H, offers excellent refinement for such a high performance pad. Ferodo FRP4187H-N Details: Manufacturer: Ferodo Manufacturer part number: FRP4187H-N Pads in box: 4 Material thickness of pad material and backing plate: 16mm Material thickness of pad material and backing plate: .628" Use: Dual purpose, street & mild track Track day & light race use for all vehicle types Road style refinement but with race material ability to withstand heat with respect to life and µ Average friction coefficient of 0.42 over working temperature range of 20°-500° C Ferodo FRP4187H-N Fitment: 2013 Scion FR-S All 2014 Scion FR-S All 2015 Scion FR-S All 2013 Subaru BRZ All 2014 Subaru BRZ All 2015 Subaru BRZ All 2013 Subaru Legacy Sedan 3.6R 2017 Subaru BRZ Non-Brembo calipers 2016 Subaru BRZ All 2017 Toyota 86 Non-Brembo calipers 2016 Scion FR-S All Ferodo FRP4187H-N Cross Reference: Carbotech CT1124 G-Loc GP1124 Hawk Brake: HB671_.628 We believe the above information is correct, but have not checked every brand fitment. Please verify the above part numbers before purchase.