HANS Brand

Stilo HANS Zero Head Restraint The Stilo HANS Zero combines the best of the Simpson's HANS development group with a fresh Italian design engineered in partnership with Italian helmet manufacturer Stilo. The result is the absolute extreme in weight saving along with HANS proven safety technology to create the lightest, most comfortable HANS Device ever.1 Using proprietary techniques and aerospace grade carbon fiber, the Stilo HANS Zero is 15% lighter than the HANS Ultra Lite (now the next-lightest HANS on the market). SFI 38.1 certified, FIA 8858 approved, made in America. This patented HANS Device is hand-made from carbon fiber. A single piece that rests on a race driver's shoulders, the HANS Device keeps you safe and comfortable behind the wheel of your race car. Stilo HANS Zero Head Restraint Details Manufacturer: Stilo Manufacturer part no.: DK19338.311-FIASFI Layback angle: 30 degrees Size: medium only Homologation: FIA 8858-2010 and SFI 38.1 Helmet Type: Snell SA and FIA helmets with integrated M6 terminals The lightest HANS device available Pads wrapped in fire-retardant material for safety and comfort Includes post anchors and tether 1 Note: this HANS device comes with a 30o layback angle in size Medium only (which we've tested and works in both open and closed cars). Feel free to give us a call at (888) 748-7223 for more details.

HANS Pro Ultra Lite The Ultimate Carbon Fiber HANS Device The HANS Pro Ultra Lite 20 Degree is both SFI 38.1 and FIA approved. With aerospace-grade carbon, the HANS Pro Ultra Lite Head Restraint is over 100 grams lighter compared to its Ultra counterpart. Not only does it save on weight, its smaller size helps with entry and exit from even smaller, tighter racecars. The HANS Device Pro Ultra Lite Head Restraint is constructed of 100% carbon fiber with a hollow core for increased weight reduction without sacrificing strength. Its sliding tethers offer superior visibility for the driver. Includes HANS posts (button-style) for your SA2015 helmet. Discovery Parts carries only dual-certified FIA/SFI HANS devices to ensure all customers are getting a HANS device that will work with their sanctioning body.

HANS IV Frontal Head Restraint Now offered in 3 different sizes, at a lower price, the Hans 4 is a new and improved FHR (Frontal Head Restraint) that is 10% lighter than the previous Hans 3. Custom molded pads which nest into the device, preventing slippage, were designed with an upgraded foam for improved comfort and support. Offered in a 20 - degree option, this FHR is perfect for the entry level driver across many race series. HANS Device 4 Head and Neck Restraints are the lightest HANS Sport Series device to date. HANS 4 Frontal Head Restraints present a contemporary approach to building a lightweight, strong, and safe HANS Device. Now in the fourth generation, HANS Device IV Head Restraints have a new design and polymer with a hollow collar which reduces the weight significantly. Its engineered reinforcements guarantee a very strong structure with a reduced mass. HANS Device IV Frontal Head Restraints provide the same level of safety as every HANS Device with the lightest, most comfortable injection-molded HANS made to date. HANS Device 4 Frontal Head Restraints are developed with ease of driver entry/exit in mind. Its rounded back is lower than the original HANS Device design, reducing the risk of getting caught on a roll cage or in window openings when moving in and out of a racecar. Authentic HANS Devices set the standard in top performance in lab crash testing and real-life race crash results. The HANS 4 is only available in a 20o Layback Angle configuration, suitable for the majority of racing applications including most road racing, HPDE, Stock Cars, Modifieds, Drag, Legends, Bandalero cars.  HANS SPORT 4 HNR FEATURES 10% Lighter than previous models  SFI 38.1 certified  Improved harness retention so belts will not slip  Custom molded pads nest in the device to prevent pads from slipping. Foam is a perfect blend for comfort and support  More available sizes to fit more drivers  3 Different Sizes – Small, Medium and Large  The best price on a HANS device on the market  Three different anchor options: Post Anchor (standard), Quick Click (SFI only), M61 (Sold Separately)  Includes helmet post anchors  Easy to use, no tether adjustment  Offered in both SFI / FIA certification allowing drivers to use the product worldwide  Unlike most entry level devices that are often bulky and uncomfortable; this new and improved design is lighter and more comfortable allowing drivers to focus.  High collar cut away made to not contact the wearer’s neck in rear impacts HANS IV SIZE CHART HANS SPORT 4 HNR FAQS I can touch my chin to my chest with the device on. Are my tethers too long? No. The HANS Device comes properly adjusted for all drivers. Unless you have changed the tether length it is fine and will work in an impact.  When I put the device on, it rubs against my neck. Is that normal?  Yes. The front of the HANS Device is narrower to accommodate arm movement. Padding can be modified or removed - it does not affect the device’s performance.  What type of shoulder belts work best with a HANS Device?  Any SFI or FIA approved harness system works with the HANS Device. Two inch or three inch belts, as well as 5-6 or more multi-point systems are all fine.  Do shoulder belts slip off the HANS Device?  Properly mounted belts do not slip off the device. If shoulder belts will not stay securely on the device, you may not have the belt mounts properly located in your chassis.  I race on a short track at relatively low speeds. Do I need a HANS Device?  Yes. Serious head and neck injuries happen at impact speeds as low as 35mph. On short tracks with tight turns it is easy to be turned almost straight into the wall.  How do I care for my HANS device?  HANS Devices need almost no maintenance but should be kept clean and dry. To protect them, HANS Devices should be stored out of direct sunlight. They may be cleaned with soapy warm water. Ensure rubber top surfaces stay clean and free of wear. Tethers should be replaced after any major impact or every 5 years. Tethers carry dated labels. Check your helmet anchors for tightness occasionally.  What if my HANS Device is in an impact?  HANS Devices should be inspected periodically or after any impacts. Examine your device in bright sunlight and run your finger around the edges. Any sign of de-lamination, cracking or exposed composite material means the device has served its purpose and should be replaced.  How long are the SFI and FIA certifications acceptable?  Different race series may have different rules regarding age of certifications. SFI 38.1 requires recertifying your HANS every 5 years, and FIA 8858 certifications do not expire. Check our website or your race sanctioning body for more information. 

HANS Device Sport 3 Head & Neck Restraint HANS Device Sport 3 Head Restraints are the lightest HANS Sport Series device to date. HANS Device Sport 3 Head Restraints present a contemporary approach to building a lightweight, strong, and safe HANS Device. Now in the third generation, HANS Device Sport 3 Head Restraints have a new design and polymer with a hollow collar which reduces the weight significantly. Its engineered reinforcements guarantee a very strong structure with a reduced mass. HANS Device Sport 3 Head Restraints provide the same level of safety as every HANS Device with the lightest, most comfortable injection-molded HANS made to date. HANS Device Sport 3 Head Restraints are developed with ease of driver entry/exit in mind. Its rounded back is lower than the original HANS Device design, reducing the risk of getting caught on a roll cage or in window openings when moving in and out of a racecar. Authentic HANS Devices set the standard in top performance in lab crash testing and real-life race crash results. The HANS Sport 3 is only available in a 20o Layback Angle configuration, suitable for the majority of racing applications including most Stock Cars, Modifieds, Drag, Legends, Bandalero and most road racing cars. However, the HANS Device Sport 3 Head Restraints are not compatible with cars that have extreme layback seats such as formula type cars, IndyCars, etc. HANS SPORT 3 HNR FEATURES Discovery Parts carries only dual homologation FIA/SFI HANS devices to make sure you're getting the right certification for any racing organization needs. Includes HANS posts (button-style) for your SA2015 helmet. Only 4 oz. (100 g) heavier than the HANS Pro Device! Improved fit, reduced weight compared to past models. Sliding tethers are standard. Injection molded super-structural carbon composite construction. Lower rounded collar saves weight and allows for easier entry/exit in many smaller, tighter vehicles.

Youth Size HANS III Device with Tether and Posts The HANS Device is synonymous with head and neck restraint technology. It is the most widely used and recognized head and neck restraint in motorsports, the product that all other products on the market are measured against. HANS Devices are used in most racing series. The HANS Device HANS III Youth Series makes the lightest-weight composite HANS device in the world available in youth sizes! These devices feature an all-new design of polymer with a hollow collar that significantly reduces weight. The engineered reinforcements offer exceptional strength with the same high level of safety as every HANS device. The reduced overall mass and weight give extra comfort and movement, well suited for the youth racer. The HANS III youth series will fit neck sizes of 11-14 inches (28-36 cm). Choose from two tether/post styles: standard HANS FIA 8858-2010 Clip In/Out; or SFI 38.1 Quick-Release. HANS SPORT 3 YOUTH HNR FEATURES The lightest weight composite HANS device offered. Engineered reinforcements with hollow collar. Posts and tether included, standard or QR. Exceptional comfort and movement. Suited for the youth racer. Fits neck sizes of 11-14 inches (28-36 cm). SFI 38.1 certified. The Youth Size HANS Device Sport III is value priced with the same performance as the Professional Series HANS Device. It is constructed from an injection molded super-structural carbon composite. The lower, rounded collar saves weight and allows for easier entry/exit in many smaller, tighter spaces. Sliding tethers come standard.

HANS Quick Click Anchors Quick Click Anchors feature pull strings for fast release Pull strings have velcro patches sewn onto ends

Stilo HANS Helmet Post Anchors (for SA2015 and newer) Stilo branded HANS helmet post anchors to attach your HANS or Stand21 head-and-neck restraint to your Snell SA2015 or SA2020 helmet. (Those helmets have threaded M6 inserts molded into the helmet.) These post anchors are FIA-approved and screw right into those helmet inserts. Stilo's FIA Approved HANS Posts In Black/Blue/Red Anodized Metal With Laser Engraving Dresses Up Every Stilo build. These are the Stilo FIA Internationally Approved Hans Posts.  Includes one pair (does one helmet) Stilo FIA HANS Posts in Red Details: Manufacturer: Stilo Manufacturer part number: AK 1131.12K-Stilo AK113112K-STILO BLACK Manufacturer part number: AK 1131.12B-Stilo AK113112B-STILO BLUE Manufacturer part number: AK 1131.12R-Stilo AK113112R-STILO RED Qty in kit: Two Color: Red Nut washers included: No FIA approved: Yes

HANS Helmet Post Anchors HANS helmet post anchors to attach your HANS or Stand21 head-and-neck restraint to your Snell SA2015 or SA2020 helmet. (Those helmets have threaded M6 inserts molded into the helmet.) These post anchors are FIA-approved and screw right into those helmet inserts.

HANS Tether for Sport I, Adjustable, Pro Ultra, & Pro For Quick Click Anchors  Hans Device Replacement Tether For your Hans Adjustable, Pro Ultra, Sport I, and Hans Professional with Quick Click anchors. This Hans replacement tether and slider kit comes in the standard 16.5" length and others for special applications. HANS Tether for Sport I, Adjustable, Pro Ultra, & Pro For Quick Click Anchors Details: Manufacturer: Simpson Manufacturer part number: TK.1241.4 Length: Standard 16.5" / 420cm length works in most applications and is the one that comes standard with every adult device. Some race series require replacements between 2 and 5 years A great upgrade for an older fixed tether device. Kit includes one tether, two tether carriers and 4 new mount screws Length of X-Short tether from inside of both loops: 14.5" / 370cm TK12414XS Length of Short tether from inside of both loops: 15.5" / 395cm TK12414S Length of Standard tether from inside of both loops: 16.5" / 420cm TK12414 Length of Long tether from inside of both loops: 17.5" / 445cm TK12414L If you have a medium or large device, please stay with the standard 16.5" length Your device is safest with the factory installed and tested 16.5" length. If you feel you need a special length, please call us at 706-344-1235 so we can make sure you have the safest set-up.

HANS Tether for Hans III For Quick Click Anchors  Hans Device Replacement Tether For your Hans III with Quick Click anchors. This Hans replacement tether and slider kit fits the Hans III (also nicknamed the Hans Sport 3) device and comes in the standard 16.5" length and others for special applications. HANS Tether for Hans III For Quick Click Anchors Details: Manufacturer: Simpson Manufacturer part number: TK.1441.7Length: Standard 16.5" / 420cm length works in most applications and is the one that comes standard with every adult device. Some race series require replacements between 2 and 5 years A great upgrade for an older fixed tether device. Kit includes one tether, two tether carriers and 4 new mount screws Length of X-Short tether from inside of both loops: 14.5" / 370cm TK14417XS Length of Short tether from inside of both loops: 15.5" / 395cm TK14417S Length of Standard tether from inside of both loops: 16.5" / 420cm TK14417  Length of Long tether from inside of both loops: 17.5" / 445cm TK14417L If you have a medium or large device, please stay with the standard 16.5" length Your device is safest with the factory installed and tested 16.5" length. If you feel you need a special length, please call us at 888.748.7223 so we can make sure you have the safest set-up.

HANS Pro Ultra / Ultralite / Sport 1 Tether Kits Replace the tether kit on your HANS Pro Ultra / Ultralite / Sport 1 if you're involved in an incident, or swap out your existing tether for a longer or shorter one. For use with Sliding tethers and post anchors only.

HANS Sport III Tether For Post Anchors  Hans Device Replacement Tether For your Hans Sport III device with Post anchors. This Hans replacement tether and slider kit fits the Hans Sport III device and comes in the standard 18" length and others for special applications. HANS Sport III Tether For Post Anchors Details: Manufacturer: Simpson Manufacturer part number: TK.1441.3 Some race series require replacements between 2 and 5 years A great upgrade for an older fixed tether device. Kit includes one tether, two tether carriers and 4 new mount screws Length of X-Short tether: 16" / 406cm TK14317XS Length of Short tether: 17" / 431cm TK14317S Length of Standard tether: 18" / 457cm TK14317 Length of Long tether: 19" / 482cm TK14317L If you have a medium or large device, please stay with the standard 18" length

HANS Sport 2 Tether Kits Replace the tether kit on your HANS Sport 2 if you're involved in an incident, or swap out your existing tether for a longer or shorter one. For use with Sliding tethers and post anchors only.

HANS Sport II Device Replacement Tether For Quick Click Anchors  Hans Device Replacement Tether For your Hans Sport II device with Quick Click anchors. This Hans replacement tether and slider kit fits the Hans Sport II (also nicknamed the Hans 3) device and comes in the standard 16.5" length and others for special applications. HANS III Tether For Quick Click Anchors Details: Manufacturer: Simpson Manufacturer part number: TK.1441.3 Length: Standard 16.5" / 420cm length works in most applications and is the one that comes standard with every adult device. Some race series require replacements between 2 and 5 years A great upgrade for an older fixed tether device. Kit includes one tether, two tether carriers and 4 new mount screws Length of X-Short tether from inside of both loops: 14.5" / 370cm TK11413XS Length of Short tether from inside of both loops: 15.5" / 395cm TK11413S Length of Standard tether from inside of both loops: 16.5" / 420cm TK11413 Length of Long tether from inside of both loops: 17.5" / 445cm TK11413L If you have a medium or large device, please stay with the standard 16.5" length