Helmets

Arai GP-6RC 8860-2010  The GP-6RC is a stunning example of Arai’s vision and technological mastery engineered into a functional, real-world piece of safety equipment. It begins with a startling advancement: a proprietary Carbon Fiber (CF) weave that combines CF’s existing benefits of high strength and extreme light weight with a major added benefit that standard CF does not possess: flexibility. (Standard CF tends to splinter or shatter instead of flex on impact.) The result is a helmet ready for the unparalleled demands and requirements of Formula-1 racing. One whose remaining list of features and advances is impressive because, for this helmet and its prospective user, it simply has to be. The GP-6RC meets or exceeds the FIA 8860-2010 certification standard which is valid for 10 years from the date of manufacture.  These closeout helmets have manufacture dates of 2017-2019 so you will have a 8860 certified helmet that is still valid for 4-6 years.Notice: If you have the helmet painted, please do not remove the trims as this will void the FIA certification.   ARAI GP-6RC 8860-2010 CARBON FIBER AUTO RACING HELMET POSITIVE SHIELD LATCH Positive latch mechanism provides solid shield latching while allowing normal operation of the shield. Designed to be an integral component of the shield system, not just an add-on afterthought. Simplicity of the function belies the complexity of the design. ARAI GP-6RC 8860-2010 CARBON FIBER AUTO RACING HELMET HANS POST ANCHORS Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-installed M6 threaded washer/nut with 6mm threads accepst a variety of anchor systems, making installation much easier. Flat surface area around the mounting nut allows the anchor post base to rest flush with the helmet surface. ARAI GP-6RC 8860-2010 CARBON FIBER AUTO RACING HELMET SHELL Proprietary carbon fiber material and weave provide an extremely strong yet flexible material, helping manage impact energy. Multiple reinforcing materials are used to improve performance and keep weight and size to a minimum. ARAI GP-6RC 8860-2010 CARBON FIBER AUTO RACING HELMET EJECT READY CROWN PAD Pre-cut pocket under the crown pad can be easily removed to accommodate the optional eject system.   GET THE BEST FIT The GP-6RC 8860-2010 Clearance is available in sizes XS to Large. The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

 STILO Venti WRC Carbon Fiber Helmet  - Uncompromising Safety and Performance   The new Stilo WRC Venti Range features lightweight and durable carbon fiber construction using the smallest of three available carbon fiber shells for the smallest and lightest helmet available. The Stilo WRC is made even lighter using the innovative PURO technology from Stilo which saves weight by eliminating the final clear coat layer, providing maximum protection without compromising on weight or comfort. Designed specifically for motorsport enthusiasts, the Stilo WRC Venti Range is built to withstand the demands of high-speed racing, ensuring optimal safety during intense driving scenarios.Stilo WRC Venti Range Carbon Fiber Helmet is 8859-SA2020 certified: This Stilo WRC Venti Range Carbon Fiber Helmet meets the highest safety standards set by those renowned organizations. It guarantees top-tier protection for professional and amateur racers alike.With its unique ventilation system, the Stilo WRC Venti Range offers superior airflow, keeping you cool and focused even during long races or under extreme conditions. Stilo WRC Venti Range Carbon Fiber Helmet's aerodynamic design reduces drag, allowing for enhanced performance and improved stability at high speeds, giving you a competitive edge on the track.The interior padding of the Stilo WRC Venti Range can be easily removed and cleaned, ensuring a fresh and comfortable fit for every race. Stilo WRC Venti Range Carbon Fiber Helmet is equipped with innovative noise-canceling features from the redesigned boom with all new geometry for maximum visibility and sound quality, this minimizes external distractions, allowing you to maintain focus and concentration on the track ahead. The Stilo WRC Venti Range features an all new aggressive design featuring an adjustable visor, providing optimal visibility and allowing you to customize your field of view for different driving conditions.The Stilo WRC Venti Range Carbon Fiber Helmet is a professional-grade helmet trusted by professionals, the Stilo WRC Venti Range is the pinnacle of safety and performance in motorsport, offering uncompromising quality for your racing needs.Invest in the Stilo WRC Venti Range Carbon Fiber Helmet today and experience unparalleled safety, comfort, and performance on the racetrack. Dominate every curve with confidence and stay ahead of the competition.The Stilo Venti WRC is the update of the legendary WRC helmet as worn by multiple rally champions. This helmet features many improvements most notably the innovative wireless (WL) communication system. The new wireless key available allows the driver and co-driver to continue to communicate even when outside of the car.The Stilo Venti WRC rally helmet retains the market-leading Stilo WRC helmet electronics system but the comms port has been re-designed for use with the WL wireless key (sold separately) which, when fitted fits perfectly with the contours of the shell shape so it does not interfere with FHR posts or straps. The microphone boom shape has been improved to further deflect cabin noise, improving the communication clarity between co-driver and driver. The magnetic dynamic, noise-canceling microphone is adjustable to allow for optimum spacing from the mouth to reduce external noise. Noise attenuating ear muffs in the Stilo Venti WRC surround the speakers to hugely reduce external noise and improve the levels of comfort. The Stilo Venti WRC helmet's electronics is also compatible with traditional Stilo wired amplifiers or the new wireless amplifiers. The Adjustable Peak of the Stilo Venti WRC helmet can be raised/lowered to give clear optimal visibility with low sun. Supplied with factory fitted HANS Post anchors as standard. Also Available with FIA 8860-2018 certification    How to Measure Your Head for a Stilo WRC Venti Carbon Fiber Helmet The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Schuberth SP1 Carbon Helmet SNELL SA2020 & FIA 8859-2015 With nearly 100 years dedicated to developing head protection solutions -- and 20 years of providing the most technologically advanced helmets to top drivers in F1, IndyCar and other top series -- Schuberth presents its first motorsport helmet with both FIA 8859-2015 and SNELL SA2020 certifications: the SP1 Carbon. AERODYNAMICS & VENTILATION The SP1 Carbon was developed with extensive wind tunnel testing to achieve ideal aerodynamics and optimum air flow. It offers a perfect aerodynamic balance that can be customized with various spoilers and ventilation scoops to meet the requirements of every type of racing. With 12 ventilation channels across the SP1's shell, optimum circulation is achieved through aerodynamic design and air flow channels built into the EPS (interior padding), providing the ideal flow for intake of cool air and exhaust of hot air. COMMUNICATION SYSTEM READY Channels in the cheek pads allow for easy installation of radio communications. A full selection of plug & play integrated electronics are available as options. From comfortable ear cup speakers to a 3.5mm jack for your ear buds -- or a system with both! -- you can choose a mic integrated into your chin pad or a boom mic. Schuberth helmet communications options make it easy to seamlessly integrate your race comms. FULL CARBON SHELL & 3MM VISOR Every SP1 Carbon helmet is produced in Schuberth's own factory in Italy, by the same hands that produce the masterpiece SF3 FIA 8860-2018 ABP helmets used by many F1 drivers. The SP1 uses an exclusive, autoclave-cured carbon fiber shell handcrafted to create a unique helmet combining light weight, solid construction and superior safety in an iconic design. The SP1's 3D Injected visor is directly derived from their F1 expertise, offering 12 hues ranging from transparent to dark with several mirroring and multi-layered coating options. All standard visors are Pinlock 120 lens equipped for optimum fog resistant performance. External tear-off buttons are also installed. AVAILABLE ACCESSORIES Schuberth SP1 Top Air Schuberth SP1 Individual Vent Scoops Schuberth SP1 Visors Schuberth SP1 Scoops Shuberth SP1 Helmet Bag Schuberth SP1 Visor Pouch WEIGHT Small shell (XS, S, M, L): 3.0 lb (1.36 kg) Large shell (L+, XL, XXL): 3.2 lb (1.46 kg)          

Bell GT6 RD Carbon Fiber Auto Racing Helmet SA2020 with electronic communications built-in Derived from HP6, the GT6 CARBON features the same modern and aggressive design, developed for racers in closed-car environments, featuring a wide eyeport for extended vision with an ultra-lightweight Premium carbon shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. The RD is fitted with a fully integrated radio communication kit with a microphone and earcups providing optimal noise insulation. The kit includes a wired 4 pin male IMSA radio connector.  BELL GT6 CARBON FIBER AUTO RACING HELMET FEATURES Ultra-lightweight Premium Carbon Composite shell Wide eyeport opening for optimal vision in closed cockpit cars Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Integrated channels in face piece offering multiple options to install drinking tube, valves, and radio systems Extraction vents to maximize cooling and air circulation Factory installed communication system with microphone and ear cups. (IMSA) Factory installed Hans anchors as original equipment Optional Top and Side air intakes available for use with external cooling system Earcups for increased noise insulation Interior: Dark Grey High Strength – High Comfort FR Fabric Color: Carbon, Gloss Finish Homologation: FIA8859-2015 & Snell SA2020 Sizes: 6 3/4 (54) to 7 5/8+ (61+) Gear Up Like a Pro with the Bell GT6 RD Carbon Fiber Helmet SA2020. Crafted for Champions, this helmet packs advanced safety and performance into its lightweight carbon fiber build. Get ready to rule the racetrack! IN THE BOX BELL GT6 Carbon FIBER AUTO RACING HELMET Clear SE06 3mm DSAF Shield Installed Drawstring Helmet Bag Plastic Tearoff Posts Installed Hex Wrench Key

Bell RS7 Carbon Fiber Helmet SA2020 The Bell RS7 Carbon Fiber SA2020 helmet features Bell high-pressure, proprietary molding system based on the innovative HP7 design. This ultra-lightweight carbon shell is designed for optimum acoustic comfort, energy absorbing capability, and gives the Bell RS7 Carbon Fiber SA2020 helmet ideal aerodynamic performance. Top forced air inserts improve internal ventilation while the hollow synthetic rubber gasket seal ensures that air, water, and dust won t enter the helmet in outdoor environments. The Bell RS7 Carbon Fiber SA2020 helmet advanced ventilation system features 14 intake and extraction channels with air intake covers in a refined aero design for the most discerning racers. BELL RS7 CARBON FIBER HELMET FEATURES: Snell SA2020 and FIA 8859-2015 homologation. Includes clear SE07 3MM DSAF shield (SV SE07 pivot system) and DSAF anti-fog insert. Ultra-lightweight carbon fiber shell, high-pressure molding system improves shell strength. 14 intake and exhaust channels provide amazing ventilation. Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection. Improve high-speed aerodynamic stability with optional chin bar and top Gurneys and rear spoiler (sold separately). Top forced-air inserts including eyeport, eight-hole and ten-hole options when used with forced air system (sold separately). Integrated channels for optional integrated drinking tube and radio microphone systems. Ultra-plush grey Comfort-Max FR interior fabric provides superior moisture wicking. Pro-style, multi-density foam interior with contoured cheek pads for professional fit. Narrow eye port. M6 terminal hardware and hex wrench for Head and Neck Restraint anchors. This helmet will ship to you with signature required for delivery.

  Bell BR8 Carbon Fiber Auto Racing Helmet SA2020 Designed for off-road and dirt forms of racing, the versatile and ultra-lightweight BELL BR8 Carbon Fiber auto racing helmet can be used in multiple configurations including standard, left or right side forced air, left or right 3/4 top forced air, or top forced air. Utilizing an innovative kit system (included with the helmet), racers can customize the Bell BR8 Carbon Fiber auto racing helmet to adapt to different forms of racing and seat configurations providing the ultimate flexibility in one model. The Bell BR8 Carbon fiber auto racing helmet features an aerodynamic front duckbill, Double Screen Anti-Fog (DSAF) insert to create a positive visor seal and prevent shield fogging, and rear-facing Venturi airflow vents that prevent dust from entering the helmet while still allowing forced air to be introduced into the helmet. The Bell BR8 Carbon Fiber auto racing helmet features a unique air chamber system that evenly distributes airflow around the head regardless of the top air configuration used. The Bell BR8 Carbon Fiber auto racing helmet can be used with or without ear cups.         BELL BR8 CARBON FIBER AUTO RACING HELMET FEATURES Lighweight Carbon Fiber Shell FIA 8859-2015 and Snell SA2020 approved Integrated channels in face piece offer multiple options to install drink tube and radio system Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance. Multi-purpose fit system that can be used with or without included ear cups. Includes front duckbill to enhance aerodynamic performance Interior ventilation channels enhanced to maximize airflow Can be converted to left or ride side air, 3/4 left or right top air, or top air by using a versatile kit system (included) with forced air nozzle and cover plates Integrated channels in face piece offer multiple options to install drink tube and radio systems. Comes with standard rear-facing vents that create a Venturi effect allowing air to exchange and circulate in the helmet while preventing dust and dirt from entering Interior: Dark grey high strength and high comfort fire resistant fabric Synthetic rubber gasket seal to prevent dirt and water from entering the helmet Shield and pivot kit: SRV-8 Color: Carbon Fiber Gloss Clear Sizes: 7 1/8- (57-) to 7 5/8+ (61+) All sizes shown in centimeters

Bell GT6 Carbon Fiber Helmet Racing Helmet SA2020 Derived from HP6, the Bell GT6 CARBON FIBER auto racing helmet features the same modern and aggressive design, developed for racers in closed-car environments, featuring a wide eyeport for extended vision with an ultra-lightweight Premium carbon fiber shell. Its ventilation slots can be connected to various types of air intakes for external cooling systems. It can be fitted with optional earcups providing optimal noise insulation, with fully integrated radio communication kit and hydration systems (available separately or in RD version). BELL GT6 CARBON FIBER AUTO RACING HELMET FEATURES Ultra-lightweight Premium Carbon Fiber Composite shell Wide eyeport opening for optimal vision in closed cockpit cars Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Integrated channels in face piece offering multiple options to install drinking tube, valves, and radio systems Extraction vents to maximize cooling and air circulation Factory installed Hans anchors as original equipment Optional Top and Side air intakes available for use with external cooling system Optional earcups for increased noise insulation Interior: Dark Grey High Strength High Comfort FR Fabric Alternative interior fabric colors: Tan, White, Red, Purple, Blue, Green and Neon Yellow (by special order) Color: Carbon, Gloss Finish Homologation: FIA8859-2015 & Snell SA2020 Sizes: 6 3/4 (54) to 7 5/8+ (61+) IN THE BOX GT6 Carbon Clear SE06 3mm DSAF Shield Installed Drawstring Helmet Bag Plastic Tearoff Posts Installed Hex Wrench Key

Stilo ST5.1 GT Offshore Composite Helmet SA2020 Note: This helmet includes communications in the left port. Stilo ST5 GT SA2020 Offshore Composite Helmet OrangeThe legend returns. The SA2020 Stilo ST5 GT helmet carries over everything that made the SA2015 version one of the most-loved helmets on the grid. Featuring the same tall eye-port and iconic side ports of the previous generation, the SA2020 ST5 GT from Stilo is worth getting excited about. This Offshore variant is already wired up for communications, and sports a bright orange shell, making it easy to spot. Stilo ST5 GT SA2020 Offshore Composite Helmet Orange Details:Manufacturer: StiloManufacturer part number: DA0702BF2TColor: OrangeM6 Nut Washer for HANS and other neck restraintsRating: SA2020Shield lock position: CenterReplaceable cheek pads: YesSizes: X-Small - XXX-Large (54 - 64 cm) This is a slightly heavier version of the ST5 Carbon helmet. It is made from a Kevlar Multi-Sandwich Fiber composite formed in an autoclave. It carries the same Snell SA2020 certification as the Carbon helmet, but the different material adds the weight. This different material yields a slightly heavier helmet, but at a reduced cost. The Snell SA2020 rating satisfies almost all racing sanctioning bodies’ requirements for helmet certifications.Available with integrated electronics, top- or side-forced air supply, hydration, or any combination of the three, this helmet offers flexibility while maintaining a clean cabin. There are no wires or hoses hanging down below the helmet – everything integrates seamlessly with the shell of the helmet.Features an M6 nut integrated into the shell to interface with Head and Neck Restraint Systems.All Stilo shields are treated with an anti-fog treatment and they do require special care. The best result we have by far is the Stilo Visor cleaner. Liberally spray the outside of the visor with the cleaner, and wipe in a single swipe with a microfiber towel until clean and dry. If fingerprints or dirt remain, repeat as needed. A back and forth wiping motion will tend to leave lint from the rag on the visor, so the single-pass works best. Repeat if necessary, but usually, one pass works great.Do not use Windex or any glass cleaner containing ammonia, as this can harm the anti-scratch coating on the outside of the visor, and the anti-fog coating on the inside of the visor. Note: There are many things we can do to adjust your helmet fit. Obviously the best thing is to come into our show room and try on the helmets, but many times, that is just not possible. One of the great things about Stilo helmets is the adjustability with helmet padding. Crown padding, Cheek padding and different ear muff sizes are all available. Please contact a DiscoveryParts helmet expert at 888-748-7223.   Size Note: We have found that customers who typically wear a size 59 helmet are most comfortable in size 60, which uses the large shell. Please order accordingly. STILO ST5 GT OFFSHORE COMPOSITE HELMET FEATURES: Includes noise attenuating earmuffs to reduce exterior noise and maximize effectiveness of communications with your crew. Select communications, forced air, hydration or eject options now, or add them later. New 2020 Snell Certification offers increased protection for all head forms at higher g-forces and speeds All Existing Stilo ST5 shields and other accessories work on new ST5.1 SA2020 helmets All sizes shown in centimeters An effective helmet is one that fits properly. Have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head, starting at a point about an inch above the eyebrows and around a point in the back of the head that results in the largest measurement, finally wrapping back around to the front. It's a good idea to take a few measurements and order your helmet based on the largest. This helmet will ship to you with signature required for delivery.

  Bell GP.3 Carbon Fiber Helmet SA2020 The Bell GP.3 Carbon Fiber Helmet SA2020 is ideal for open-environment racers who need maximum ventilation and clear vision in complex racing environments. This helmet has traditional F1 styling, an ultra-lightweight Carbon shell, and a dynamic air intake system for cutting-edge aerodynamic performance. The Bell GP.3 Carbon Fiber Helmet SA2020 is a top pick for formula, kart, and all types of open wheel racers who value comfort, performance, and professional-level features. This helmet now has improved shield integration, a rubber gasket seal, manual lever closable air vents, and a double-screen, anti-fog (DSAF) visor to accommodate any tough race in the elements. FEATURES: Snell SA2020 and FIA 8859-2015 homologation. Includes clear SE03 3MM DSAF shield (SV SE03/05 Pivot System) with DSAF anti-fog insert. Ultra-lightweight carbon shell with improved shell strength from high-pressure molding. Direct-flow chin vents and manual air intakes provide exceptional ventilation. Chin bar Gurney (duckbill) improves aerodynamic performance. Ambient noise reduction options with ear cup configuration. Hollow synthetic rubber gasket seals out water, dust, and dirt. Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection. Integrated drinking tube systems and integrated channels for optional radio microphone systems. Ultra-plush grey Comfort-Max FR¬ interior fabric improves moisture wicking. Contoured cheek pads for professional fit. Includes M6 HANS-device hardware and hex wrench.   This helmet will ship to you with signature required for delivery.

          Bell Racing Helmets GTX.3 Carbon Helmet SA2020 The sleek, aerodynamic Bell Racing Helmets GTX.3 Carbon Helmet SA2020 features an ultra-lightweight carbon fiber shell, a front chin-bar gurney and an integrated rear wing to provide the open-cockpit driver with improved aerodynamic performance and high-speed stability. The Bell Racing Helmets GTX.3 Carbon is ideal for use in dusty, open-wheel environments with its integrated shield, double screen anti fog (DSAF) visor, rubber gasket seal, and rear-facing vents to help with air exchange and provide clear vision while racing in the elements. This stylish helmet carries Snell SA2020 approval, FIA 8859-2015 Homologation, and comes with M6 terminal hardware for your Head and Neck Restraint (HANS) device. These safety and comfort features make the Bell Racing Helmets GTX.3 Carbon Helmet SA2020 is ideal for dirt track, karting, open-wheel, formula, and all types of open-compartment racing where clean, distraction-free airflow is essential for competition. FEATURES Snell SA2020 and FIA 8859-2015 homologations. SE03 3mm DSAF clear shield (SV SE03/05 pivot system). Ultra-lightweight carbon fiber construction with improved shell strength from high-pressure molding system. Drive confidently with sleek aerodynamic styling with integrated wing. Venturi airflow system allows air exchange while preventing dust and dirt from entering the helmet. Chin bar Gurney (duckbill) improves aerodynamic performance. Hollow synthetic rubber gasket seal keeps out dust, dirt, and water. Multi-piece, multi-density high-impact custom bead absorbing liner for low- and high-velocity impact protection. Install integrated drinking tube systems and radio microphone systems (sold separately) with integrated channels in the face piece. Ultra-plush grey Comfort-Max FR¬ interior improves comfort and moisture wicking. Pro-style, multi -foam density interior with contoured cheek pads for professional fit. Standard-size eye port. Double Screen Anti-Fog (DSAF) visor insert for improved anti-fog performance. M6 terminal hardware and hex wrench for Head and Neck Restraint devices All sizes shown in centimeters     This helmet will ship to you with signature required for delivery.

Sparco Air Pro RF-5W Martini Racing Helmet   Spectacular limited edition Sparco Air Pro RF-5W features a beautiful Martini Racing paint scheme With its strong Carbon-Kevlar reinforced fiberglass shell, the Sparco RF-5W provides superior levels of comfort and safety. The Martini Racing livery takes the design of this phenomenal helmet to the next level. As a limited-edition Sparco exclusive, this helmet sets itself apart from any other in the paddock. Inside the helmet, the EPS padding and linings can be removed for washing, and can be re-positioned for more personalized fit and comfort. The helmet features exceptional ventilation with grilles on the front chin bar and six ducts on the top and back, keeping the driver cool and dry in the heat of racing. The RF-5W can also accommodate a drinking/hydration system. The visor features a center-positioned locking tab with a continual adjustment. Available in two different shell sizes (one for Small through Med-Large, another for Large on up) in order to get you the perfect fit. The Air Pro RF-5W Martini Racing helmet is supplied with factory fitted FHR / HANS posts. FIA 8859-2015 and Snell SA2015 approved. FEATURES Limited edition Martini Racing color scheme Strong and lightweight Carbon Kevlar reinforced shell Excellent ventilation to help keep you cooler and more focused FIA 8859-2015 and Snell SA2015 approved     An effective helmet is one that fits properly. Have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head, starting at a point about an inch above the eyebrows and around a point in the back of the head that results in the largest measurement, finally wrapping back around to the front. It's a good idea to take a few measurements and order your helmet based on the largest. This helmet will ship to you with signature required for delivery.

Bell M.8 Carbon Fiber Helmet SA2020 The Bell M.8 Carbon Fiber SA2020 is designed with comfort in mind while keeping with traditional Bell M style. Its large eye port opening and adjustable forehead vents to reduce potential fogging are designed for the driver who wears sunglasses or eyeglasses. The Bell M.8 Carbon Fiber SA2020 is available in seven sizes, from XS to XL+, providing a near-custom fit with a wide spectrum of sizes. The helmet is certified for use with HANS devices with integrated M6 female threaded inserts for HANS post anchors, which are sold separately. The Bell M.8 Carbon Fiber SA2020 includes a clear face shield and black visor strip, shield hardware with a hex wrench, and a drawstring helmet bag to keep it all together. Snell SA2020 and FIA 8859-2015 approved. FEATURES: Snell SA2020 and FIA 8859-2015 homologated. Carbon fiber shell is ultra-lightweight (Size M = 2.9 lbs./1.3 kg). High-pressure molding system improves shell strength. High-impact custom bead absorbing liner is multi-piece/multi-density for low- and high-velocity impact protection. Integrated channels for optional drinking tube and radio microphone systems. Black Comfort-Plus FR¬ interior fabric for excellent moisture wicking. Exceptional fit with multi-density foam interior. Best-in-class ventilation system includes direct-flow chin vents and manual level air intakes. Hollow synthetic rubber gasket seal keeps out water, dust, and dirt. Large eye port for eyeglass wearers. Includes clear SRV-8 3mm SRV shield (SRV-1 pivot system). Tinted shields also available . M6 terminal hardware and hex wrench for Head and Neck Restraint anchors. Available only in carbon fiber finish. This helmet will ship to you with signature required for delivery.

  STILO Venti WRC Carbon Fiber Helmet  - Uncompromising Safety and Performance   The new Stilo WRC Venti Range features lightweight construction using the smallest of three available shells for the smallest and lightest helmet available. Designed specifically for motorsport enthusiasts, the Stilo WRC Venti Range is built to withstand the demands of high-speed racing, ensuring optimal safety during intense driving scenarios.Stilo WRC Venti Range Helmet is 8859-SA2020 certified: This Stilo WRC Venti Range Helmet meets the highest safety standards set by those renowned organizations. It guarantees top-tier protection for professional and amateur racers alike.With its unique ventilation system, the Stilo WRC Venti Range offers superior airflow, keeping you cool and focused even during long races or under extreme conditions. Stilo WRC Venti Range Helmet's aerodynamic design reduces drag, allowing for enhanced performance and improved stability at high speeds, giving you a competitive edge on the track.The interior padding of the Stilo WRC Venti Range can be easily removed and cleaned, ensuring a fresh and comfortable fit for every race. Stilo WRC Venti Range Helmet is equipped with innovative noise-canceling features from the redesigned boom with all new geometry for maximum visibility and sound quality, this minimizes external distractions, allowing you to maintain focus and concentration on the track ahead. The Stilo WRC Venti Range features an all new aggressive design featuring an adjustable visor, providing optimal visibility and allowing you to customize your field of view for different driving conditions.The Stilo WRC Venti Range Helmet is a professional-grade helmet trusted by professionals, the Stilo WRC Venti Range is the pinnacle of safety and performance in motorsport, offering uncompromising quality for your racing needs.Invest in the Stilo WRC Venti Range Helmet today and experience unparalleled safety, comfort, and performance on the racetrack. Dominate every curve with confidence and stay ahead of the competition.The Stilo Venti WRC is the update of the legendary WRC helmet as worn by multiple rally champions. This helmet features many improvements most notably the innovative wireless (WL) communication system. The new wireless key available allows the driver and co-driver to continue to communicate even when outside of the car.The microphone boom shape has been improved to further deflect cabin noise, improving the communication clarity between co-driver and driver. The magnetic dynamic, noise-canceling microphone is adjustable to allow for optimum spacing from the mouth to reduce external noise. Noise attenuating ear muffs in the Stilo Venti WRC surround the speakers to hugely reduce external noise and improve the levels of comfort. The Stilo Venti WRC helmet's electronics is also compatible with traditional Stilo wired amplifiers or the new wireless amplifiers. The Adjustable Peak of the Stilo Venti WRC helmet can be raised/lowered to give clear optimal visibility with low sun. Supplied with factory fitted HANS Post anchors as standard. Also Available with FIA 8860-2018 certification     How to Properly Measure your head for the perfect fitting Stilo WRC Venti helmet The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Sparco Sky RF-7W Carbon SA2020 The Sparco Sky RF-7W has a carbon fiber outer shell reinforced with layers of carbon-Kevlar. It includes a wider eye opening that can be used for open wheel or closed cockpit driving. Multiple exterior vents increase circulation to a redesigned interior. The interior has channels which not only cool the driver, but has additional channels which route air towards the visor, which reduces the chance of visor fogging. Sky RF-7W has removable, washable padding that can be repositioned for a comfortable fit. All interior seams have been removed from areas where greater pressure is exerted on the head. The Sky RF-7W has been designed to accommodate a drink tube and an intercom system. Available in sizes XS to XL (including new M/L size using Sparco's smaller, lighter shell) with a red or black interior. Sky RF-7W has HANS posts pre-installed. SNELL 2020 and FIA 8859-2015 approved. FEATURES: Choose red or black interior color Light weight carbon fiber with carbon-kevlar base layers New "Medium/Large" size uses the lighter and more compact shell HANS posts pre-installed Anodized aluminum chin strap hardware Removable, washable lining Wind tunnel optimized venting with anti-fog air channels Pre-molded interior to accommodate drink tubes and an intercom system (sold separately). SNELL SA2020 and FIA 8859-2015 approved The most effective helmet is one that fits properly. To measure your head, have an assistant use a dressmaker's tape or a piece of string to measure the circumference of your head. Start at a point about an inch above your eyebrows, looping around the back of your head at the point that results in the largest measurement, and finally around to the front again. It's a good idea to take two or three measurements to make sure you have the largest one. This helmet will ship with signature required for delivery.

Arai GP-7 SA2020 Helmet A driver favorite, the Arai GP-7 SA2020 helmet combines the most popular Arai features with new, improved upgrades. The GP-7 is constructed with Arai own PBcLc (Peripherally Belted Complex Laminate) shell construction and the same shell shape as the Formula 1 grade GP-7SRC model. New ventilation, a soft EPS liner, and a wider eye port for optimized peripheral vision are part of this new shell which gives the driver notable strength and flexibility. Replaceable cheek pads make racing comfortable for any driver, as do the three larger, closeable intake vents and two larger exhaust vents on the ventilation system. The GP-7 helmet is Snell SA2020 certified with factory-installed M6 washers/nuts. Drivers of any skill level can install their own Head and Neck Restraint system using a 6mm bolt. The FIA-8859-2015 certification sticker is applied to the interior liner of the helmet. POSITIVE SHIELD LATCH Simple yet effective, the positive latch mechanism on the GP-7 SA2020 helmet gives the driver solid shield latching, but is seamlessly integrated into the standard shield system for ease of use. NEW SHIELD PIVOT HARDWARE The GP-7 SA2020 features new shield pivot hardware with improved aerodynamics based on the updated track slider design. An increased peripheral field of view is featured on the 6 series, which surpasses the 5 series in visibility. The wider eye port, shield, and pivot hardware were all developed on the RC and adapted to the GP-7 SA2020 helmet. VENTILATION Increased airflow is key to the GP-7 SA2020 helmet design. This includes bigger, closeable intake vents with large 10mm holes in both front and rear. Larger rear vents also provide better airflow. M6 ANCHORS Drivers of all skill levels will appreciate the integrated, pre-installed M6 threaded washer/nut with 6mm threads which accepts a range of Head and Neck Restraint devices. A flat surface area around the mounting nut will let the anchor post base to rest flush along the surface of the helmet and around the full perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material. NEW CHINBAR The GP-7 SA2020 new, ergonomic chinbar and ridge at the bottom edge of the shell lowers the center of gravity and increases the structural integrity of the helmet. Additional improvements include a rise in the shell above the shoulders for increased clearance. EJECT READY CROWN PAD Arai's optional Eject system can be easily accommodated via a pre-cut pocket under the helmet crown pad. An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements to make sure you have the largest one. This helmet will ship to you with signature required for delivery.