Stilo ST5 Helmet Shields
Stilo Stilo ST5 Helmet Shields from $143.95
Stilo Anti-Fog/Anti-Scratch Visor for the ST5 Helmet Stilo ST5 visors fit all Stilo SA2020, SA2015, FIA 8859/8860 non-ABP model helmets. Stilo visors are available in over 10 different colors in different levels of gradient to make sure you have the perfect shield for every race condition. From the Stilo dark smoke to a selection of multiple iridiums, Stilo ST5 visors are a great way to ensure your best vision and lap time. Stilo ST5 GT Visor Part Number Chart: STI-YA0800 ST5 Clear Visor STI-YA0801 ST5 Smoked medium visor STI-YA0802 ST5 Smoked dark visor STI-YA0803 ST5 Mirror medium visor STI-YA0804 ST5 Mirror dark visor STI-YA0805 ST5 Iridium blue medium visor STI-YA0806 ST5 Iridium blue dark visor STI-YA0807.2 ST5 Iridium red medium visor STI-YA0808 ST5 Iridium red dark visor STI-YA0809.2 ST5 Iridium yellow medium visor - Not FIA Certified STI-YA0810 ST5 Iridium yellow dark visor - Not FIA Certified STI-YA0813 ST5 Amber visor - Not FIA Certified STI-YA0814 ST5 Clear double glazed visor - Dirt / Offroad Friendly STI-YA0815 ST5 Clear double glazed visor - Not FIA Certified STI-YA0816 ST5 Sun screen short visor STI-YA0821 ST5 Visor sun strip blocker STI-YA0817 ST5 Visor screw kit STI-YA0818 ST5 Visor locking pin replacement STI-YA0851 ST5 Clear Anti-Scratch No Anti-Fog - Dirt / Offroad Friendly High quality, Anti-fog visors shaped for the Stilo ST5 GT helmets. The Stilo ST5 series is unique in that the shield lock is located in the center position of the shield. The shield lock is released by squeezing the outboard sides together and that will then release it from the mount stud that is located in the center of the helmet. The reason for this is to "clean-up" the sides of the helmet where a side impact in a head containment seat may grab parts of the helmet. All Stilo ST5 shilds have the center release mechanism installed on it.All Stilo ST5 shields are treated with an anti-fog treatment and they do require special care. The best result we have by far is the Stilo Visor cleaner. Liberally spray the outside of the visor with the cleaner, and wipe in a single swipe with a micro fiber towel until clean and dry. If fingerprints or dirt remain, repeat as needed. A back and forth wiping motion will tend to leave lint from the rag on the visor, so the single pass works best. Repeat if necessary, but usually one pass works great.Stilo Visor Care: Do not use Windex or any glass cleaner containing ammonia, as this can harm the anti-scratch coating on the outside of the visor, and the anti-fog coating on the inside of the visor. This is the official Stilo Visor Cleaner.
Bell SE07 3mm Helmet Shields (Fits RS7, RS7-K, HP7)
Bell Bell SE07 3mm Helmet Shields (Fits RS7, RS7-K, HP7) from $99.95
Bell Racing Helmets SE07 3mm Helmet Shield Bell SE07 helmet shields are specifically designed for the SA2020 Bell RS7 and HP7 helmets. These 3mm injection-molded optically correct polycarbonate face shield with Double Screen Anti-Fog (DSAF) insert for superior fog control. The SE07 shield uses the SV (SE07) pivot kit, is compatible with tear offs, and is available in a variety of tint colors. Bell recommends that you periodically change shields for better vision and safety. All shields come with adjustable tear-off posts. (Tear-offs not included.) DOES NOT FIT KC7-CMR. KC7 helmets require the SE07 2mm shield. AVAILABLE TINT COLORS FOR BELL RACING SE07 VISOR: Clear Light Smoke Dark Smoke Yellow Silver Mirror Blue Mirror Rainbow Iridium Mirror Multi-Layer Blue Multi-Layer Red
Arai SK-6 Karting Helmet (Adult)
Arai Arai SK-6 Karting Helmet (Adult) $649.95
Arai SK-6 Adult Karting Helmet Being the dominant helmet on the F1 grid, winning an IRL Championship, and protecting the heads of NASCAR heroes like Gordon, Burton, and Montoya has put Arai on the receiving end of an abundance of world-class racing helmet input. The SK-6 gets the benefits of all this input. Designed by Arai specifically for karting, the SK-6 adds a ton of features and advancements to the already-impressive list of its predecessor. You won t believe the comfort, lightness, and feeling of confidence the SK-6 gives you, thanks to its incredibly strong, proprietary cLc (Complex Laminate Construction) shell. Its strength allowed Arai to give the SK-6 an extremely soft EPS liner for better comfort and impact energy management. If you re serious about taking your karting to the next level, choose the helmet that already there. Snell K2015 certified. SK-6 FEATURES Positive shield lock mechanism provides Solid latching, while allowing normal operation of the shield. Designed to be an integral component of the shield system and function, not just an add-on afterthought. The simplicity of the function masks the complexity of the design. A feature taken directly from the new GP-6PED New shield pivot hardware improves aerodynamics. Type "6" 3mm shield. Wider eye port for increased peripheral field of view. Larger intake vent toggles for easier operation. Large rear vents for improved ventilation. Features taken directly from the new GP-6PED. New "Removable/Replaceable" cheek pad design allows for custom fitting with optional thicknesses (15mm, 20mm, 25mm, 30mm). Cheek pad covers are also removable to allow for easier and more thorough cleaning. Newly sculpted chin bar and ridge along lower edge of shell to improve structural integrity. Provides a stronger shell near the opening where it is needed as well as lowers the Center of Gravity. Rise in shell above the shoulders for added clearance. An effective helmet is one that fits properly. Have an assistant use a measuring tape or a piece of string to measure the circumference of your head, starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It's a good idea to take several measurements and use the largest one.
Bell KC7 CMR Champion Karting Helmet
Bell Bell KC7 CMR Champion Karting Helmet $799.95
Bell Racing Helmets KC7-CMR Champion Karting Helmet The Bell KC7-CMR is a karting specific helmet based on the same design as the top of the range HP7 carbon helmet, as used by some F1 drivers. Constructed using an ultra lightweight Carbon/Kevlar/Glass hand laminated shell with a 2mm double screen anti fog visor for perfect visibility in all conditions. Ultra lightweight and strong carbon/kevlar/fiberglass composite shell Striking Champion pink graphic design is sure to get you noticed Anti fog visor provides excellent visibility 14 air intakes and extraction channels provide optimum airflow through the helmet A range of spoilers and air intakes are available separately The shell of the KC7-CMR is designed to provide the optimum visor location which improves aerodynamics and reduces noise. The powerful top and chin bar ventilation keeps the drivers head cool thanks to a total of no less than 14 air intakes and extraction channels. A range of accessories including different visor options, spoilers and air intakes are available separately. Helmet weights - Sizes 54-56cm - 2.6lb ( /-3%) Sizes 57-59cm - 2.7lb ( /-3%) Snell-FIA CMR-2016 approved
-24% sale
Stilo ST5 CMR Kart Racing Helmet
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo ST5 CMR Kart Racing Helmet $480.95 $629.00
Stilo ST5 CMR Kart Racing Helmet NOTE: White/Blue and White/Red color selections have a white exterior with a colored interior only. The ST5 CMR 2016 is one of Stilo's karting helmets that are directly derived from Stilo's auto racing helmets that dominate at the top levels of racing. Drivers rave about the superior comfort levels as well as Stilo lightweight construction and unparalleled field of vision, a crucial attribute for karting. The CMR standard was developed jointly by the FIA Institute and Snell Memorial Foundation to ensure safer and lighter weight helmets for karting. The Stilo ST5 CMR Kart delivers, and more. FEATURES: Snell/FIA CMR 2016 certified Youth helmet Exceptional fit; fully adjustable including replaceable cheek and crown pads Great field of vision Best in class aerodynamics with available aero kits Aerodynamics personalization available Patented shield locking mechanism with 2 positions Exceptional air flow EPS cheek pads provide the best in lateral crash safety Lightweight construction 1200 grams CMR version Stilo helmets are worn by winning drivers worldwide, including well known F1 Mercedes driver Valterri Bottas, Monster Energy NASCAR Cup Series Champions Martin Truex, Jimmie Johnson and Kyle Busch, IndyCar Series Champion Tony Kanaan and WRC Champion Sebastion Loeb.
-24% sale
Stilo ST5 KRT Karting Helmet SK2020
00
DAYS
00
HRS
00
MIN
00
SEC
Stilo Stilo ST5 KRT Karting Helmet SK2020 $550.00 $720.00
STILO ST5 KRT KARTING HELMET SK2020 The Stilo ST5 KRT (Kart) Helmet turn heads with style that closely resembles the top of the range ST5 Zero helmet used by many professional racing athletes worldwide. The ST5 Kart is manufactured in a lightweight and very strong composite material and is currently available in white. As with every Stilo helmet, the focus is on safety, comfort and function. The ST5 Kart helmet interior has an excellent fit and comfort level due to its dual density interior foam lining. From the first use, kart racers will truly appreciate the level of comfort it offers. The ST5 Kart's symmetrical visor offers excellent vision and an effortless central visor locking system that karters will appreciate. The centrally located locking system has dual opening positions allowing adjustment for the visor to be slightly open for extra airflow as preferred by some karters in damp conditions or left completely sealed, but more importantly in both of these positions the visor is locked and will never fly open. The Stilo ST5 Kart Helmet arrives with a 3mm thick FIA F1 standard visor - adding a dramatic improvement in safety. Offered in a large range of different finishes and tints, including colored iridium options that have been added for a totally bespoke finish. In addition a double glazed option is available for racing in wet and cold conditions to prevent misting up. EPS cheek pads provide the best in lateral crash safety, while retaining the functionality of the earmuffs to provide a comfortable aural environment for communication. Available in gloss white exterior finish, the ST5 Kart is homologated to the Snell K 2020 standard.
Arai GP-7 Helmet Shields
Arai Arai GP-7 Helmet Shields from $78.95
Arai GP-7 Anti-Fog Helmet Shields Available in a variety of colors and tints, these replacement shields fit all versions of the Arai GP-7 SA2020 helmet.   The GP-7 series actually fits two different Arai helmet models. The GP-7, and of course the Arai every auto racer wants, the Arai GP-7SRC. All Arai shields we offer at DiscoveryParts.com are Genuine Arai in standard, Anti-Fog, Dual Pane, and with the Arai Visor Tint Strip ontop You know how well your helmet was crafted when it was built and the same care and exacting standards are used in your new Arai GP-7 shields.
Bell KC7 CMR Lewis Hamilton Edition Karting Helmet
Bell Bell KC7 CMR Lewis Hamilton Edition Karting Helmet $999.95
Bell Racing Helmets KC7-CMR "Lewis Hamilton" Karting Helmet     F1 World Champion Lewis Hamilton designs special edition Bell karting helmet   Bell Racing Helmets teamed up with F1 Multiple World Champion Lewis Hamilton to develop a special edition Lewis Hamilton KC7 CMR Karting helmet. Lewis Hamilton worked personally with Bell in-house custom paint team to create a custom graphic for the KC7 CMR with the signature elements and colors of his F1 design. This special edition KC7 CMR features a multi-layer red SE07 2mm visor, clear top and side air intakes, clear rear spoiler and HP helmet bag. The KC7-CMR, an ultra-lightweight youth karting helmet, incorporates the same technology, aerospace materials and construction methods used to build the advanced Bell HP7 helmet used by Lewis Hamilton in F1 competition. The KC7-CMR's sleek, aerodynamic design features an advanced ventilation system that can be used with or without air intakes to maximize cooling and a double screen anti-fog (DSAF) visor to eliminate fogging. Homologated to the Snell/FIA CMR standard and certified for global competition, the KC7-CMR is designed to minimize weight for karting drivers under the age of 18.  The Bell KC7-CMR is the perfect helmet for the next generation of champions as they start their racing career in karting. SPECIFICATIONS: Ultra lightweight helmet featuring a carbon/fiberglass shell: 2.6 lbs. in sizes 54 - 56cm and 2.7 lbs. in sizes 57 - 59cm (+/- 3%). Advanced multi-density, multi piece liner to maximize energy absorption and impact performance. Cutting-edge style based on the Bell HP7 used in F1. Graphic design created by Lewis Hamilton reflecting his F1 helmet livery. Powerful top and chin bar ventilation thanks to a total 14 air intake and extraction channels. Optimized shield design resulting in improved aerodynamic behavior and energy absorbing capacities. Multilayer red SE07 2mm visor. Clear top and side air intakes mounted on the helmet. Clear spoiler mounted on the helmet. Non-fireproof lining for extra durability. Snell-FIA CMR-2016 approved. Sizes: 54 to 59 cm. Snell-FIA CMR-2016 approved.
Arai CK-6 Karting Helmet (Youth)
Arai Arai CK-6 Karting Helmet (Youth) $579.95
Arai CK-6 Youth Karting Helmet The Arai CK-6 is designed specifically for junior kart racers who are too small to comfortably fit and/or support the weight of an adult model SK-6 karting helmet. Meets the SNELL/FIA CMR standard for junior karting CK-6 FEATURES SRC Superior Resin shell material, developed and formulated in-house at Arai, dramatically improves the bonding properties of standard fibers, allowing the use of less material for reduced weight and lower cost. Removable/Replaceable cheek pads in optional sizes allow for custom fit when needed. Easily removable 5mm top layer of foam allows for further custom fitting. Wide and tall eye port for an exceptional field of view. Large intake vent toggles for easy operation, with large rear vents for improved ventilation. Features taken directly from the GP-6PED auto-racing helmet. Newly sculpted chin bar and ridge along lower edge of shell to improve structural integrity. Provides a stronger shell near the opening where it's needed while lowering the center of gravity. Rise in shell above the shoulders for added clearance. SPECIAL YOUTH SIZING XXS: 50-51cm XS: 52-53cm S: 54-56cm M: 57-58cm L: 59cm An effective helmet is one that fits properly. Have an assistant use a measuring tape, or a piece of string to measure the circumference of your head starting at a point approximately one inch above the eyebrows in front, around a point in the back of the head that results in the largest possible measurement, and finally wrapping back to the front. It is a good idea to take several measurements to make sure you have the largest one.
Bell RS7K Carbon Fiber Karting Helmet
Bell Bell RS7K Carbon Fiber Karting Helmet $1,199.95
 BELL RS7 K ULTRA-LIGHT CARBON FIBER KARTING HELMET The RS7K Carbon, based on the RS7C LTWT developed in collaboration with Penske Racing, is designed for the professional kart racer who knows weight and optimal performance are linked. The RS7K Carbon is the karting-only version (non-fire retardant, extra durable interior) of the LTWT series and is the lightest adult karting helmet available on the market weighing under 2.75 pounds race-ready. The helmet features a lightweight carbon shell, an innovative shell and recessed shield design to improve acoustic comfort while enhancing aerodynamic performance and energy-absorbing capabilities. The sleek, modern design incorporates an advanced ventilation system, Double Screen Anti-Fog (DSAF) shields, and a rubber gasket seal that ensures that water does not enter the eye opening in rainy conditions. Aerospace grade ultra-lightweight carbon shell Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Multi-purpose fit system that can be used with or without ear cups (ear cups included) Optical grade injection molded Double Screen Anti-Fog (DSAF) visor for anti-fog control and superior visibility Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation Shell and shield design optimized to improve aerodynamic performance, reduce internal noise, and enhance energy management capacities Rear spoilers, top gurney, and chin bar gurneys available separately Non-fireproof lining for extra durability RS7K Carbon is NOT compatible with head and neck restraint anchor systems or devices Synthetic rubber gasket seal to prevent dirt and water from entering the helmet Shield and pivot kit: SE07 3mm, SV(SE07,SE077) Homologation: Snell K2020 approved Alternative interior fabric colors: Black, Blue, Green, Red, Tan, Violet, White and Yellow (by special order) Color: Carbon Gloss Clear Sizes: 7 1/8- (57-) to 7 5/8+ (61+) This helmet will ship to you with signature required for delivery.
Bell KC7-CMS Charles LeClerc Kart Racing Helmet Front left Image
Bell Bell KC7-CMR Charles Leclerc Karting Helmet $999.95
Bell KC7-CMR Charles Leclerc Kart Racing Helmet  Alright, racing aficionados, hold onto your (kart) seats because I'm about to drop some helmet knowledge on ya! If you ever daydreamed of tearing up the tracks and feeling the Ferrari vibes without the accompanying credit card debt, have we got a treat for you! Introducing the Bell KC7-CMR Charles Leclerc Kart Racing Helmet. Oohs and aahs expected. First things first, the helmet. This ain't just a flashy lid. Crafted in collaboration with F1 superstar Charles Leclerc, it's designed to capture the essence of his personal F1 helmet - all in the iconic red and white Ferrari colors. Think of it as getting a piece of Charles's swagger, without any awkward hair transplants. Racing to the Features: Ferrari Vibes: You'll feel like you've stepped into the Ferrari paddock every time you wear it. Minus the paparazzi, of course. Accessorize Like You're in Monaco: Over $300 worth of accessories, including that sleek clear red visor and the aerodynamic rear spoiler. It’s like having the full Leclerc treatment. Safety Standards on Point: Made for the younger race guns (under 18s), it boasts the FIA/Snell CMR certification. So, moms and dads? That's peace of mind, right there. Feather-Light: With a weight that seems almost suspiciously low (did they borrow tech from UFOs? Maybe.), you'll hardly feel it on your head. Breathable Beast: Boasting 14 intake and extraction channels, say goodbye to sweaty helmet hair. Fog? What Fog? Thanks to the Double Screen Anti-Fog Visor, foggy lenses will be a distant memory of your lesser helmet days. Styling and Profiling: Its aerodynamic accessories, which are available separately, will make you the sharpest looking racer on the track. So, why lust over Charles's helmet on your TV screen when you can have a piece of that F1 awesomeness yourself? Hit that accelerator and grab your own Bell KC7-CMR Charles Leclerc Kart Racing Helmet!  Bell has teamed up with Formula 1 driver Charles Leclerc to create this KC7-CMR karting helmet in red and white Ferrari colors. Charles worked closely with Bell's paint team to ensure the graphics and signature elements are closely matched to his own F1 helmet.  This Charles Leclerc edition version includes a 2mm multi-layer clear red visor, top and side air intakes, rear spoiler, and a Bell HP Helmet bag. That is over $300 worth of accessories included.  The KC7-CMR Charles Leclerc Helmet is certified to the FIA/Snell CMR standard and designed for karting drivers under the age of 18 years of age. Helmet weights (excluding accessories): Sizes 52-56: 2lb 10oz or 1186 grams (+/-3%) Sizes 57-59: 2lb 12oz or 1230 grams (+/-3%) Extremely Light Weight – 2lbs 10oz in sizes 52 to 56 and 2lbs 12oz in sizes 57 to 59 (+/-3%). Innovative Shell and Shield Design to improve Acoustic Comfort, Aerodynamic Performance, and Energy Absorbing Capacities. Design based on the Innovative HP7 used in F1. Lightweight Carbon Composite Shell. Advanced Ventilation System with 14 Intake and Extraction Channels. Front and Side Air Intakes are available (Sold Separately). Hollow Synthetic Rubber Gasket Seal ensures that Air, Water, and Dust Can’t Penetrate the Helmet. Multi-Piece, Multi-Density High-Impact Custom Bead Absorbing Liner for Low and High-Velocity Impact Protection. Aerodynamic Accessories including Chin Bar and Top Gurneys and Rear Spoiler (Sold Separately) for Improved Aero Performance and Stability at High Speeds. Pro-Style, Multi Foam Density Interior with Superior Moisture Wicking Properties. Comfort-Plus Karting Style Interior with Removable / Replaceable Cheek Pads. Double Screen Anti-Fog (DSAF) Visor Insert For Improved Anti-Fog Performance. DHP Helmet Bag Included. Hex Wrench Included. Homologation: Snell-FIA CMR-2016 Approved. Frequently Asked Questions About Bell Helmets: Where are Bell helmets made? Bell helmets are proudly manufactured in the Bahrain, maintaining the highest quality standards. Is Bell a good helmet brand? Yes, Bell is renowned for its commitment to safety, innovation, and performance, making it a trusted choice among professional racers and enthusiasts. Are Bell helmets Snell approved? Yes, many Bell helmets are Snell approved, meeting rigorous safety standards. Are Bell helmets FIA approved? Absolutely, several Bell helmets are FIA 8860-2018 certified, ensuring they meet the most stringent safety requirements. Do Bell helmets run small? Bell offers a variety of sizes and often provides sizing charts to help you choose the right fit. It's important to measure your head and refer to their guidelines for a proper fit. For racers who demand the best in safety and performance, Bell auto racing helmets are the ultimate choice. Explore our extensive collection to find the perfect helmet for your racing needs. Bell Racing Helmets: Bell Racing Helmets are renowned for their exceptional quality and safety features. With a wide range of models to choose from, you can find the perfect Bell Racing Helmet to suit your racing needs. Bell Racing Helmet: Each Bell Racing Helmet is a product of meticulous craftsmanship and cutting-edge technology. When you wear a Bell Racing Helmet, you're choosing a helmet that prioritizes your safety and performance on the track. Bell Race Helmets: Bell Race Helmets come in various styles and designs to cater to different types of motorsports. Whether you're into karting, open-wheel racing, or stock car racing, Bell has race helmets tailored for your specific discipline. Bell Kart Race Helmet: Your Bell Kart Race Helmet is more than just protective gear; it's a crucial part of your racing ensemble. The aerodynamic design of a Bell Kart Race Helmet helps reduce wind resistance, giving you a competitive edge. Bell Helmet: A Bell Helmet is a symbol of trust in motorsports. Professional racers and amateurs alike rely on the comfort, safety, and durability that Bell Helmets provide during intense racing conditions. Bell Helmets: Bell Helmets have a rich history of innovation and excellence. The extensive range of Bell Helmets ensures that there's a model suitable for every racer, whether you're a seasoned pro or just starting in the sport. Bell Carbon Fiber Helmet: Bell Carbon Fiber Helmets combine the lightweight properties of carbon fiber with advanced safety features. These helmets are a top choice for racers seeking the ultimate in protection without sacrificing comfort. Kart Race Helmet: A kart racing helmet is a fundamental piece of safety gear for any racer. Bell's race helmets are engineered to meet the rigorous demands of motorsports, ensuring you stay safe on the track. Racing Helmet: Your racing helmet is your shield against potential accidents. Bell Racing Helmets are designed to offer superior impact protection while maintaining optimal visibility and ventilation. Racing Helmets: Racing helmets are a racer's best friend. Bell Racing Helmets, with their reputation for quality and safety, are the go-to choice for many professionals and enthusiasts in the racing community. Bell Racing: Bell Racing is synonymous with excellence in the motorsports industry. Their commitment to research, development, and testing has solidified their position as a leader in racing helmet technology. Kart Racing Helmet: When it comes to kart racing, your helmet is your first line of defense. Bell Kart Racing Helmets are engineered to withstand the rigors of high-speed racing, ensuring your head is protected. Kart Racing Helmets: Kart racing helmets from Bell are designed to provide optimal head protection while maintaining lightweight and aerodynamic qualities, allowing you to perform at your best.
Bell KC7 CMR Carbon Fiber Karting Helmet
Bell Bell KC7 CMR Carbon Fiber Karting Helmet $1,199.95
  ULTRA-LIGHT CARBON FIBER KARTING HELMET Bell Racing is proud to introduce the KC7 CMR Carbon, the first ultra-lightweight carbon fiber youth karting helmet on the market. Based on the HP7 Formula 1 helmet, this sleek, aerodynamic design features an advanced ventilation system with 14 air intake and extraction channels designed to maximize cooling and a double screen anti-fog (DSAF) insert to prevent fogging in rainy conditions. Certified to the FIA/ Snell CMR standard designed for karting drivers under the age of 18, the KC7 CMR Carbon is a winning choice for the next generation of champion drivers. Ultra-Lightweight Carbon Fiber Shell: 2.6 lbs. (sizes 52-56) or 2.7 lbs. (sizes 57-59) Innovative shell and shield design improve acoustic Comfort, Aerodynamic Performance and Energy Absorption Design based on the innovative HP7 used in F1 Advanced Ventilation System with 14 Intake and Extraction Channels Front and Side Air Intakes Available (Sold Separately) Hollow Synthetic Rubber Gasket Seal Ensuring that Air, Water and Dust Can t Penetrate into the Helmet Multi-Piece, Multi-Density High-Impact Custom Bead Absorbing Liner for Low and High Velocity Impact Protection Aerodynamic Accessories including Chin Bar and Top Gurneys and Rear Spoiler (Sold Separately) for Improved Aero Performance and Stability at High Speeds Pro-Style, Multi Foam Density Interior with Superior Moisture Wicking Properties Comfort-Plus Karting Style Interior with Removable / Replaceable Cheek Pads SE07 2MM DSAF Shield (SV SE07 Pivot System) Clear Shield Double Screen Anti-Fog (DSAF) Visor Insert For Improved Anti-Fog Performance Draw String Helmet Bag Included Hex Wrench Included FIA/Snell CMR2016 Homologation This helmet will ship to you with signature required for delivery.
Bell KC7-CMR Ayrton Senna Karting Helmet
Bell Bell KC7-CMR Ayrton Senna Karting Helmet $999.95
Bell Racing KC7-CMR Ayrton Senna Karting Helmet This is a special edition of the widely popular Bell KC7-CMR Karting Helmet that honors the racing legend and three-time Formula 1 World Champion Ayrton Senna. Bell Racing Helmets teamed up with Senna Brands and the Ayrton Senna Institute in creating the KC7-CMR Ayrton Senna Karting Helmet. Bell's expert helmet paint team designed the graphics and signature elements to closely match Senna's utterly iconic yellow, blue, and green Formula 1 helmet. Senna, who began his motorsport journey in karting, used the famous yellow, blue, and green colors throughout most of his racing career. The helmet’s design, which features these colors, is instantly recognizable among racing fans. Fully Loaded And Ready For The Podium! This Ayrton Senna helmet edition includes a Multi-Layer Smoke Blue SE07 2mm visor, clear top- and side-air intakes, a clear rear spoiler, and a Bell HP helmet bag. That's more than $300 worth of accessories included! The design of the KC7-CMR karting helmet is taken from Bell Racing's top-of-the-line HP7 Carbon auto racing helmet. The same helmet worn by many Formula 1 and other professional racing drivers. The Bell KC7-CMR Ayrton Senna Helmet is certified to the FIA/Snell CMR-2016 standard and was originally designed for karting drivers under the age of 18. However, adult drivers can still derive benefits from helmets meeting this standard, particularly in karting or similar low-speed motorsport activities. The KC7-CMR Ayrton Senna Helmet was produced under the license of Senna Brands and the Ayrton Senna Institute. Bell Racing KC7-CMR Ayrton Senna Karting Helmet Snell/FIA CMR-2016 approved Lightweight carbon/composite shell Accessories include a Multi-Layer Blue visor, top- and side-air intakes, clear rear spoiler, and a Bell HP helmet bag Weight: 2.6lbs/1186 g (sizes 54-56cm); 2.7lbs/1230g (sizes 57-59cm) Innovative shell and shield designs improve acoustic comfort, aerodynamic performance, and energy absorption Based on the premier Bell Racing HP7 Carbon auto helmet used in Formula 1 Advanced ventilation system with 14 air intake and extraction channels Hollow synthetic rubber gasket seal keeps out air, water, and dust Multi-piece, multi-density high-impact custom bead absorbing liner provides low- and high-velocity impact protection Aerodynamic accessories including chin bar, top Gurneys, and rear spoiler available separately Comfort-Plus karting style interior with removable/replaceable cheek pads Double Screen Anti-Fog (DSAF) visor insert included Bell HP helmet bag included Hex wrench included
Schuberth SK1 Carbon Fiber Karting Helmet (CMR)
Schuberth Schuberth SK1 Carbon Fiber Karting Helmet (CMR) $1,399.00
Schuberth SK1 Carbon Fiber Helmet SK1 CARBON is the first Schuberth CMR helmet. SNELL FIA CMR 2016:  Carbon helmet is finished in a matte clear coat, and includes top air scoops as standard. OUR EXPERIENCE AT YOUR SUPPORT: The lightweight, hand laid carbon, and autoclave cured shell, is derived from our experience gained in Formula 1, and is specifically developed for the CMR homologation. The SK1 helmet is produced with the same technologies used for the FIA 8860-2018 models, included injection-molded 3mm FIA homologated visor with symmetrical opening and Pinlock® 120 mechanical anti-fog, ventilation system, and aramid chinstrap. EXCEPTIONAL COMFORT: SK1 benefits from all Schuberth experience in making safe and comfortable helmets. SK1 has dedicated interiors designed specifically to meet the needs of all future champions. 16 VENTILATION CHANNELS ON THE SHELL: Optimum circulation is achieved through aerodynamic design and air flow channels built into the EPS, providing the ideal flow for intake of cool air and exhaust for hot air. In open air, the helmet feeds 14 liters of fresh air per second at 100 km/h. 3 MM THICK 3D INJECTED VISOR: 19 different visors available from transparent to dark with several mirroring multi-layer mirroring coating options and the new High Contrast options. All standard visors are Pinlock® 120 lens equipped providing optimal fog resistant performace. Tear-off buttons are also installed. VISOR LOCK SYSTEM: Two-stage visor lock ensures the visor always closes symmetrically and therefore securely. Stage One lets in a small amount of air while the visor is still securely locked. Stage Two creates a firm visor seal that will keep out fine dust or water. Schuberth SP1 Carbon Fiber Helmet Available Accessories Schuberth SK1 Individual Vent Scoops Available Here Schuberth SK1 Visors Available here Schuberth SK1 Scoops Available Here
Sold out
Detailed view of the Bell KC7-EV CMS Karting Helmet Image
Bell Bell KC7-EV CMR Karting Helmet $599.95
Bell KC7-EV CMR Kart Racing Helmet   Introducing the KC7-EV CMR helmet, meticulously crafted for young kart drivers, offering an enhanced field of vision that's 20mm wider than the BELL KC7 CMR, resulting in 30% increased peripheral visibility. Constructed from a robust blend of carbon/kevlar and fiberglass, its design is inspired by F1 helmets. The helmet boasts an advanced ventilation system, adaptable for aerodynamics with optional air intakes, and features over 14 air channels for optimal airflow. It comes equipped with a double shield anti-fog visor (DSAF) for crystal-clear vision. Meeting the SNELL CMR2016 approval, it's mandated for CIK/FIA kart drivers under 15 and endorsed by FFSA for the same age group, yet is also favored by adults. Note: Not suitable for road use. It features authentic visors from BELL, comes in a pristine white shade, and weighs approximately 2lbs 10oz (for sizes 54-56) and 2lbs 12oz (for sizes 57-59). Crystal-Clear Vision: Thanks to the Optical grade Double Screen Anti-Fog (DSAF) visor. It's so clear; you might forget you're wearing a helmet. Keep Your Cool: Featuring a top-notch ventilation system with a whopping 14 air channels. Helmet hair, be gone! Aerodynamic Aficionado: Optimize your speed with separately available aerodynamic extras. Because who doesn't want that extra oomph? Sealed Perfection: Our synthetic rubber gasket seal ensures not a speck of track dust betrays your pristine look. Sound of Silence: Reduced internal noise for when you want to hear your engine purr and not much else. Safety First: Boasts the Snell-FIA CMR-2016 homologation. Because we care about those beautiful brains of yours. Pure Elegance: Comes in a shade so white; even your laundry detergent will be jealous. Oh, and in case you're wondering, this isn't just for the young guns. While it's mandated for those under 15 by CIK/FIA and FFSA, it’s been the helmet-of-choice for many adults looking to channel their inner youth. Just a heads up though - keep it on the track, as it's not for road use. Ready to level-up your kart racing game? Slide into the future and let the Bell KC7-CMR Kart Racing Helmet redefine your racing experience. Introducing the KC7-EV CMR helmet, meticulously crafted for young kart drivers, offering an enhanced field of vision that's 20mm wider than the BELL KC7 CMR, resulting in 30% increased peripheral visibility. Constructed from a robust blend of carbon/kevlar and fiberglass, its design is inspired by F1 helmets. The helmet boasts an advanced ventilation system, adaptable for aerodynamics with optional air intakes, and features over 14 air channels for optimal airflow. It comes equipped with a double shield anti-fog visor (DSAF) for crystal-clear vision. Meeting the SNELL CMR2016 approval, it's mandated for CIK/FIA kart drivers under 15 and endorsed by FFSA for the same age group, yet is also favored by adults. Note: Not suitable for road use. It features authentic visors from BELL, comes in a pristine white shade, and weighs approximately 2lbs 10oz (for sizes 54-56) and 2lbs 12oz (for sizes 57-59).   Bell KC7-CMR Kart Racing Helmet Features: Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance Optical grade injection molded Double Screen Anti-Fog (DSAF) 2mm shield for anti-fog control and superior visibility Powerful and effective top and chin bar ventilation system with 14 air intake and extraction channels for maximum ventilation Air intake kit, side air extractors, rear spoiler, top gurney, and chin bar gurneys available separately Shell and shield design optimized to improve aerodynamic performance, reduce internal noise, and enhance energy management capacities KC7-CMR is NOT compatible with FHR anchors and devices Synthetic rubber gasket seal to prevent dirt and water from entering the helmet Shield and pivot kit: SE07 2mm, SV(SE07, SE077) Homologation: Snell-FIA CMR-2016 Color: White Frequently Asked Questions About Bell Helmets: Where are Bell helmets made? Bell helmets are proudly manufactured in the Bahrain, maintaining the highest quality standards. Is Bell a good helmet brand? Yes, Bell is renowned for its commitment to safety, innovation, and performance, making it a trusted choice among professional racers and enthusiasts. Are Bell helmets Snell approved? Yes, many Bell helmets are Snell approved, meeting rigorous safety standards. Are Bell helmets FIA approved? Absolutely, several Bell helmets are FIA 8860-2018 certified, ensuring they meet the most stringent safety requirements. Do Bell helmets run small? Bell offers a variety of sizes and often provides sizing charts to help you choose the right fit. It's important to measure your head and refer to their guidelines for a proper fit. For racers who demand the best in safety and performance, Bell auto racing helmets are the ultimate choice. Explore our extensive collection to find the perfect helmet for your racing needs. Bell Racing Helmets: Bell Racing Helmets are renowned for their exceptional quality and safety features. With a wide range of models to choose from, you can find the perfect Bell Racing Helmet to suit your racing needs. Bell Racing Helmet: Each Bell Racing Helmet is a product of meticulous craftsmanship and cutting-edge technology. When you wear a Bell Racing Helmet, you're choosing a helmet that prioritizes your safety and performance on the track. Bell Race Helmets: Bell Race Helmets come in various styles and designs to cater to different types of motorsports. Whether you're into karting, open-wheel racing, or stock car racing, Bell has race helmets tailored for your specific discipline. Bell Kart Race Helmet: Your Bell Kart Race Helmet is more than just protective gear; it's a crucial part of your racing ensemble. The aerodynamic design of a Bell Kart Race Helmet helps reduce wind resistance, giving you a competitive edge. Bell Helmet: A Bell Helmet is a symbol of trust in motorsports. Professional racers and amateurs alike rely on the comfort, safety, and durability that Bell Helmets provide during intense racing conditions. Bell Helmets: Bell Helmets have a rich history of innovation and excellence. The extensive range of Bell Helmets ensures that there's a model suitable for every racer, whether you're a seasoned pro or just starting in the sport. Bell Carbon Fiber Helmet: Bell Carbon Fiber Helmets combine the lightweight properties of carbon fiber with advanced safety features. These helmets are a top choice for racers seeking the ultimate in protection without sacrificing comfort. Kart Race Helmet: A kart racing helmet is a fundamental piece of safety gear for any racer. Bell's race helmets are engineered to meet the rigorous demands of motorsports, ensuring you stay safe on the track. Racing Helmet: Your racing helmet is your shield against potential accidents. Bell Racing Helmets are designed to offer superior impact protection while maintaining optimal visibility and ventilation. Racing Helmets: Racing helmets are a racer's best friend. Bell Racing Helmets, with their reputation for quality and safety, are the go-to choice for many professionals and enthusiasts in the racing community. Bell Racing: Bell Racing is synonymous with excellence in the motorsports industry. Their commitment to research, development, and testing has solidified their position as a leader in racing helmet technology. Kart Racing Helmet: When it comes to kart racing, your helmet is your first line of defense. Bell Kart Racing Helmets are engineered to withstand the rigors of high-speed racing, ensuring your head is protected. Kart Racing Helmets: Kart racing helmets from Bell are designed to provide optimal head protection while maintaining lightweight and aerodynamic qualities, allowing you to perform at your best.
Bell KC7-CMR Alonso Kart Racing helmet front left Image
Bell Bell KC7-CMR Fernando Alonso Karting Helmet $999.95
BELL KC7-CMR Alonso Kart Racing Helmet Alright, speedsters! Grab your steering wheel, because we're diving deep into a helmet that's been kissed by the racing gods themselves. Ever wanted to feel what it's like to have a Formula 1 superstar whispering racing secrets in your ear? Well, meet the Bell KC7-CMR Fernando Alonso Kart Racing Helmet. Yup, that's right—this ain't your regular helmet, folks! Made in collaboration with none other than two-time F1 World Champion Fernando Alonso (can we get a vroom vroom?), this helmet doesn't just protect that noggin of yours—it makes a statement. I mean, it's in blue and yellow, modeled after Alonso's own F1 headgear. Can we say #HelmetGoals? Here's why the Bell KC7-CMR Alonso Edition is revving our engines: F1 Vibes: Alonso didn't just lend his name; he went full throttle, working with Bell to make this helmet a twin of his own. Accessorize Like A Pro: With over $300 worth of included goodies like a clear purple visor, top and side air intakes, and a spoiler, you're not just getting a helmet—you're getting the full Alonso package. Lighter than Air: Okay, not literally, but with its feather-like weight, you'll wonder if it's made of magic. Aero-Everything: From the design inspired by the legendary HP7 used in F1 to the plethora of aerodynamic accessories, this helmet's got the aerodynamics of a soaring eagle. Safety First, Always: Certified to the FIA/Snell CMR standard, this bad boy is not just about the looks—it's designed to keep young racers safer than a cat in a sunbeam. Comfort is Key: Because what's the point of racing if you're not comfy while doing it? And hey, even if you're not hitting the tracks anytime soon, just imagine the bragging rights at your next BBQ when you casually drop, "Oh this? It's just my Bell KC7-CMR Fernando Alonso Kart Racing Helmet. No big deal." Ready to bring out your inner F1 racer? Dash to checkout and own a piece of Alonso magic today! Bell has teamed up with the two times Formula 1 World Champion Fernando Alonso to create this KC7-CMR karting helmet in blue and yellow. Fernando worked closely with Bell's paint team to ensure the graphics and signature elements are closely matched to his own F1 helmet.  This Fernando Alonso edition version includes a 2mm multi-layer clear purple visor, top and side air intakes, rear spoiler, and a Bell HP Helmet bag. That is over $300 worth of accessories included.   Fernando Alonso's signature helmet design is a must for all Alonso fans.  The Bell KC7-CMR Fernando Alonso Helmet is certified to the FIA/Snell CMR standard and designed for kart racing drivers under the age of 18.        Top-notch accessories included and upgrades as many upgrades such as a multi-layer clear purple visor, top and side air intakes, rear spoiler, and a Bell HP helmet bag. Extremely Light Weight – 1186 grams in sizes 52 to 56 and 1230 grams in sizes 57 to 59 (+/-3%) Innovative Shell and Shield Design to improve Acoustic Comfort, Aerodynamic Performance, and Energy Absorbing Capacities Design based on the Innovative HP7 used in F1 Lightweight Carbon Composite Shell Advanced Ventilation System with 14 Intake and Extraction Channels Front and Side Air Intakes are available (Sold Separately) Hollow Synthetic Rubber Gasket Seal ensures that Air, Water, and Dust Can’t Penetrate the Helmet Multi-Piece, Multi-Density High-Impact Custom Bead Absorbing Liner for Low and High-Velocity Impact Protection Aerodynamic Accessories including Chin Bar and Top Gurneys and Rear Spoiler (Sold Separately) for Improved Aero Performance and Stability at High Speeds Pro-Style, Multi Foam Density Interior with Superior Moisture Wicking Properties Comfort-Plus Karting Style Interior with Removable / Replaceable Cheek Pads Double Screen Anti-Fog (DSAF) Visor Insert For Improved Anti-Fog Performance DHP Helmet Bag Included Hex Wrench Included Homologation: Snell-FIA CMR-2016 Approved. Frequently Asked Questions About Bell Helmets: Where are Bell helmets made? Bell helmets are proudly manufactured in the Bahrain, maintaining the highest quality standards. Is Bell a good helmet brand? Yes, Bell is renowned for its commitment to safety, innovation, and performance, making it a trusted choice among professional racers and enthusiasts. Are Bell helmets Snell approved? Yes, many Bell helmets are Snell approved, meeting rigorous safety standards. Are Bell helmets FIA approved? Absolutely, several Bell helmets are FIA 8860-2018 certified, ensuring they meet the most stringent safety requirements. Do Bell helmets run small? Bell offers a variety of sizes and often provides sizing charts to help you choose the right fit. It's important to measure your head and refer to their guidelines for a proper fit. For racers who demand the best in safety and performance, Bell auto racing helmets are the ultimate choice. Explore our extensive collection to find the perfect helmet for your racing needs. Bell Racing Helmets: Bell Racing Helmets are renowned for their exceptional quality and safety features. With a wide range of models to choose from, you can find the perfect Bell Racing Helmet to suit your racing needs. Bell Racing Helmet: Each Bell Racing Helmet is a product of meticulous craftsmanship and cutting-edge technology. When you wear a Bell Racing Helmet, you're choosing a helmet that prioritizes your safety and performance on the track. Bell Race Helmets: Bell Race Helmets come in various styles and designs to cater to different types of motorsports. Whether you're into karting, open-wheel racing, or stock car racing, Bell has race helmets tailored for your specific discipline. Bell Kart Race Helmet: Your Bell Kart Race Helmet is more than just protective gear; it's a crucial part of your racing ensemble. The aerodynamic design of a Bell Kart Race Helmet helps reduce wind resistance, giving you a competitive edge. Bell Helmet: A Bell Helmet is a symbol of trust in motorsports. Professional racers and amateurs alike rely on the comfort, safety, and durability that Bell Helmets provide during intense racing conditions. Bell Helmets: Bell Helmets have a rich history of innovation and excellence. The extensive range of Bell Helmets ensures that there's a model suitable for every racer, whether you're a seasoned pro or just starting in the sport. Bell Carbon Fiber Helmet: Bell Carbon Fiber Helmets combine the lightweight properties of carbon fiber with advanced safety features. These helmets are a top choice for racers seeking the ultimate in protection without sacrificing comfort. Kart Race Helmet: A kart racing helmet is a fundamental piece of safety gear for any racer. Bell's race helmets are engineered to meet the rigorous demands of motorsports, ensuring you stay safe on the track. Racing Helmet: Your racing helmet is your shield against potential accidents. Bell Racing Helmets are designed to offer superior impact protection while maintaining optimal visibility and ventilation. Racing Helmets: Racing helmets are a racer's best friend. Bell Racing Helmets, with their reputation for quality and safety, are the go-to choice for many professionals and enthusiasts in the racing community. Bell Racing: Bell Racing is synonymous with excellence in the motorsports industry. Their commitment to research, development, and testing has solidified their position as a leader in racing helmet technology. Kart Racing Helmet: When it comes to kart racing, your helmet is your first line of defense. Bell Kart Racing Helmets are engineered to withstand the rigors of high-speed racing, ensuring your head is protected. Kart Racing Helmets: Kart racing helmets from Bell are designed to provide optimal head protection while maintaining lightweight and aerodynamic qualities, allowing you to perform at your best.