Memorial Day 2026

Sparco Prime Spec 1 Driver Race Suit Save $1,300 off suggested retail price! The Sparco Prime Spec 1 Race Suit is a USA-exclusive suit that improves on Sparco’s original version of the Prime SP-16. The first thing you will notice is the new suit design. The Prime Spec 1 introduces two new multi-color options. In addition to a new design, the Sparco Prime Spec 1 adds extra features like fully-floating sleeves, belted waist, and internal pockets. The Sparco Prime Spec 1 Race Suit was made in collaboration with the McLaren Formula One team, resulting in the lightest FIA-approved racing suit in the world. The Prime Spec 1 has unparalleled technological features developed in Sparco’s vaunted R&D laboratories. This development project involved optimizing every race suit detail in terms of materials and construction. Details like an ultra-slim zipper, soft seamless Nomex/Vicosa® wrist and ankle cuffs, further reduced neck and shoulder pads, use of thinner thread, and ultra-flat stitching. The Sparco Prime Spec 1 Race Suit uses a three-layer construction with proprietary Sparco technology. The third, outer layer is a double-faced mesh made from original DuPont Nomex Comfort, an innovative fabric that delivers both extreme protection and maximum comfort, woven using the Kompact® system. The resulting material contains a high percentage of antistatic fibers, giving it extremely effective antistatic properties as well as excellent breathability. The Sparco Prime Spec 1 Race Suit features pre-curved arms and legs along with strategically-placed mesh stretch panels, giving this racing suit unbelievable comfort. The Sparco Prime Spec 1 is available in two color options. Sparco Prim Spec 1 Driver Race Suit Details: FIA 8856-2000 homologated Lightest FIA-approved suit in the world Exclusive DuPont Nomex fibers provide superior fire protection and comfort Pre-curved arms and legs Strategically located stretch panels Seamless arms and legs

Sabelt Enduro Silver Series 6 Point Racing Harness INCLUDES BOTH PULL-UP AND PULL-DOWN LAP BELTS FOR ULTIMATE FLEXIBILITY The new Sabelt Enduro Silver Series 6-Point Racing Harness uses 2″ belts throughout, secured by lightweight aluminum hardware. This professional-level harness is easily adjusted in the cockpit using bright yellow tabs on the shoulder belts that pull down, along with interchangeable lap belts that feature either pull-up or pull-down tabs. These make driver changes and cockpit ingress/egress easier than ever. The newly-designed camlock integrates the sub belts into the buckle, increasing driver safety in the event of an impact. FEATURES THAT RACE DRIVERS LOVE A number of other handy features have been added, including communication and hydration routing on top of the shoulder straps and silicone grip on the underside to keep your head-and-neck restraint device securely in place while on the track. Sabelt is an industry-leading manufacturer of motorsport harnesses and accessories, and the Enduro Silver Series is an extremely popular racing harness for good reason. SABELT ENDURO SILVER SERIES 6 POINT HARNESS DETAILS Manufacturer: Sabelt Manufacturer part no.: CFCIxxx0056 FIA 8853-2016 homologated New compact camlock buckle is fully integrated with the sub-belts Easily adjusted using yellow pull-down shoulder straps Interchangeable pull-up and pull-down lap belts included Velcro patches on shoulder straps for securing loose ends Communication/hydration routing on shoulder belts

Paragon Arctic Air Cooling Cylinder Paragon’s Arctic Air Cylinder is designed to be used in conjunction with the Paragon Viking Cooler, Paragon Cooling Water Y-Hose, and Paragon 1.5" Air Hose to allow chilled air to flow through your helmet. The Arctic Air Cylinder circulates chilled water internally, cooling and dehumidifying the passing air before it reaches your helmet. This keeps your head significantly cooler and helps keep your visor fog-free. The Paragon Arctic Air Cooling Cylinder is light weight and compact at 14 inches in length (not including the supply/return tubing pigtails) and weighing only 3 lbs. The Paragon Arctic Air Cooling Cylinder Details Manufacturer: Paragon Manufacturer part no.: 05-59000 Weight: 3 lbs. Length (cooling cylinder): 14 in. Inlet diameter: 2.0 in. Outlet diameter: 1.5 in.

Stilo ST5 GT Composite Racing Helmet   Snell SA2020 / FIA 8859-2015 The Stilo ST5 GT Composite Racing Helmet combines lightweight fiberglass/Kevlar composite construction, exceptional visibility, and one of the most versatile integrated accessory systems in motorsports. Designed for GT racing, endurance competition, road racing, and performance driving, the ST5 GT delivers professional racing helmet technology with the flexibility to accommodate a wide range of driver equipment. Certified to Snell SA2020 and FIA 8859-2015, the Stilo ST5 GT Composite features an advanced Multi Sandwich Fiber (MSF) shell, an expansive eyeport, a clear anti-fog visor, noise-attenuating earmuffs, and integrated side ports for compatible communication, hydration, and ventilation accessories. Its Intermediate Oval interior shape, removable comfort padding, and two-shell construction provide a secure, customizable fit. Whether preparing for sprint races, endurance events, or track days, the Stilo ST5 GT Composite offers an excellent combination of comfort, safety engineering, and versatility. Stilo ST5 GT Composite Racing Helmet Features Snell SA2020 Certified: Meets the Snell SA2020 automotive racing helmet safety standard. FIA 8859-2015 Homologated: Approved to the FIA 8859-2015 motorsport helmet standard. Fiberglass/Kevlar Composite Shell: Multi Sandwich Fiber construction engineered for strength, impact management, and comfort. Autoclave-Molded Construction: Advanced shell manufacturing process designed to deliver consistent structural performance. Wide Eyeport: Expansive viewing area improves peripheral vision and cockpit awareness. Clear Anti-Fog Visor: Includes a 3mm clear shield with an anti-fog treatment. Central Visor Lock: Convenient center-mounted closure designed for operation while wearing racing gloves. Integrated Side Accessory Ports: Accommodate compatible radio, hydration, and ventilation accessories. Noise-Attenuating Earmuffs: Included removable earmuff cushions help reduce unwanted cockpit noise. Removable Cheek and Crown Padding: Allows fit adjustments using compatible Stilo interior components. Intermediate Oval Fit: Designed for a comfortable, secure fit across a variety of head shapes. Two Shell Sizes: Small and large exterior shells reduce unnecessary bulk. M6 FHR Terminals: Factory-installed threaded receivers accommodate approved HANS and head-and-neck-restraint anchors. Optional Forced-Air Compatibility: Supports compatible Stilo air-cooling accessories. Multiple Visor Options: Compatible with selected clear, tinted, mirrored, and iridium ST5 shields. Made in Italy: Manufactured and assembled using Stilo's motorsport helmet production processes. Lightweight Fiberglass/Kevlar Multi Sandwich Fiber Shell The Stilo ST5 GT Composite features an advanced Fiberglass/Kevlar Multi Sandwich Fiber (MSF) shell designed to balance structural strength, impact-energy management, and helmet weight. Its composite shell construction uses multiple reinforcing materials arranged to provide the protective performance required by Snell SA2020 and FIA 8859-2015. Stilo manufactures the composite shell using an autoclave molding process designed to deliver consistent construction and strength throughout the helmet. The ST5 GT Composite offers a premium alternative to conventional fiberglass racing helmets while maintaining a comfortable, manageable weight for extended driving sessions. Snell SA2020 and FIA 8859-2015 Racing Certification The Stilo ST5 GT Composite carries two recognized automotive motorsport safety certifications: Snell SA2020: Automotive racing helmet certification addressing impact performance and other motorsport-specific safety requirements. FIA 8859-2015: FIA homologation for racing helmets used in approved motorsport applications. These certifications make the ST5 GT Composite suitable for numerous road racing, club racing, track-day, and endurance racing applications where the relevant standards remain accepted. Important: FIA 8859-2015 is not the same as FIA 8860-2018. Racing organizations establish their own accepted certification standards and expiration requirements. Always verify helmet eligibility before competition. Large Eyeport for Exceptional Driver Visibility Visibility is one of the defining characteristics of the Stilo ST5 GT Composite. Its generous eyeport design provides excellent peripheral vision, allowing drivers to maintain greater awareness of mirrors, approaching competitors, dashboard instruments, and cockpit surroundings. The expanded opening is particularly valuable for GT and endurance racing, where situational awareness is essential when navigating traffic and monitoring vehicle information. The helmet's eyeport design also supports Stilo's extensive selection of replacement visors and optical accessories. 3mm Clear Anti-Fog Racing Visor The ST5 GT Composite includes a 3mm clear visor with anti-fog treatment designed to help maintain visibility in changing cockpit conditions. Stilo's central visor locking mechanism provides an accessible closure point that can be operated while wearing racing gloves. The ST5 visor platform supports multiple optional shield finishes, allowing drivers to tailor their setup for different lighting conditions. Compatible options may include clear, smoke, mirrored, and iridium finishes, depending on availability. Explore the Stilo ST5 and ST5.1 Replacement Helmet Shields for additional options. Integrated Side Ports for Maximum Customization One of the ST5 GT Composite's most distinctive features is its integrated side accessory port system. Unlike conventional racing helmets that may require external accessory mounting arrangements, Stilo designed the ST5 shell with dedicated side ports that accommodate compatible components while maintaining a clean helmet profile. Depending on the selected installation, the helmet can accommodate: Integrated communication electronics Compatible microphones and speakers Radio and intercom connection systems Driver hydration equipment and drinking tubes Side-air ventilation accessories Compatible air-cooling systems This modular configuration makes the ST5 GT particularly useful for endurance racing teams and drivers who need to customize their helmets for different vehicles. Communication electronics, hydration systems, air accessories, and other optional equipment are sold separately unless specifically included in the selected configuration. Noise-Attenuating Earmuffs for GT and Endurance Racing The Stilo ST5 GT Composite includes removable noise-attenuating earmuff cushions designed to reduce unwanted sound inside noisy competition vehicles. By creating additional isolation around the ears, these cushions can help improve driver comfort during extended racing sessions. They also provide a useful foundation for compatible integrated communication systems, allowing microphone and speaker equipment to be installed according to driver preference. For endurance racers, effective sound management can make radio communication easier to understand during long stints. Removable Cheek Pads and Adjustable Interior Fit Proper helmet fit is essential for protective performance, comfort, and stability. The ST5 GT Composite incorporates removable cheek and crown comfort padding, allowing compatible interior components to be exchanged when appropriate. This flexibility enables drivers to fine-tune the helmet's fit without compromising the integrity of the protective shell. The black Nomex interior provides fire-resistant materials suitable for automotive motorsport applications. Stilo's Intermediate Oval interior shape is designed to provide secure contact around the head while accommodating a broad range of drivers. Replacement pads must be selected specifically for the ST5 helmet platform and installed according to manufacturer recommendations. Two Shell Sizes for Reduced Weight and Bulk The Stilo ST5 GT Composite uses two exterior shell sizes to provide more proportional helmet dimensions across its available size range. The smaller shell accommodates helmet sizes 54, 55, 57, and 59, while the larger shell accommodates sizes 60, 61, 63, and 64. This approach helps reduce unnecessary exterior material around smaller head sizes while providing adequate interior dimensions for larger drivers. The transition between the small and large shell occurs at size 60, making it particularly important to evaluate fit when selecting between sizes 59 and 60. M6 HANS and FHR Anchor Compatibility The Stilo ST5 GT Composite includes factory-installed M6 threaded mounting receivers designed for approved Frontal Head Restraint hardware. These threaded mounting points allow compatible HANS and other FHR anchor posts to be installed without modifying the helmet shell. Important: M6 threaded receivers are included, but HANS/FHR anchor posts are sold separately unless specified in the selected package. Always use approved anchor hardware and follow the installation requirements of the helmet and head-and-neck-restraint manufacturers. Optional Forced-Air Cooling and Hydration Systems For drivers competing in hot environments or extended endurance races, the ST5 GT Composite can be configured with compatible Stilo ventilation and hydration accessories. Available configurations include selected side-air and top-air systems that can help introduce external cooling air into the helmet. Hydration accessories allow compatible drinking tubes to be routed through the helmet's integrated accessory system. The helmet's modular design helps keep these systems organized while reducing interference with the driver's comfort padding and cockpit equipment. Air-cooling hardware, hydration components, and external cooling equipment are available separately. Stilo ST5 GT Composite Helmet Specifications Manufacturer: Stilo Model: ST5 GT Composite Helmet Type: Full-face automotive racing helmet Snell Certification: SA2020 FIA Homologation: FIA 8859-2015 Shell Material: Fiberglass/Kevlar Multi Sandwich Fiber Shell Construction: Autoclave-molded composite Exterior Shell Sizes: Two Fit Profile: Intermediate Oval Interior: Black Nomex Comfort Padding: Removable cheek and crown pads Earmuffs: Removable noise-attenuating cushions included Included Shield: 3mm clear anti-fog visor Visor System: Central locking mechanism Compatible Shields: Stilo ST5 and ST5.1 FHR Mounting: Factory-installed M6 threaded receivers FHR Anchor Posts: Sold separately Accessory Ports: Integrated side-mounted system Communication System: Optional Hydration System: Optional Forced-Air Compatibility: Yes, with compatible accessories Chin Strap: Double D-ring Helmet Bag: Included Available Finishes: Silver, Matte Black, White Manufacturer Country: Italy Stilo ST5 GT Composite Sizing Chart  Stilo ST5 GT Composite Available Colors The ST5 GT Composite is offered in three traditional racing finishes: Silver: Metallic motorsport appearance with a premium gloss finish. Matte Black: Subtle, understated styling with a non-gloss exterior. White: Classic racing helmet appearance suitable for a wide range of driver equipment. Color and size availability may vary by remaining manufacturer inventory. Stilo ST5 GT Composite vs. ST5 GT Carbon The Stilo ST5 GT Composite and ST5 GT Carbon share the versatile ST5 platform, large eyeport, integrated accessory ports, and motorsport-focused design. The primary difference is the outer shell construction. ST5 GT Composite: Uses Stilo's fiberglass/Kevlar Multi Sandwich Fiber construction, providing a balance of performance, durability, and value. ST5 GT Carbon: Uses a carbon fiber shell designed to reduce weight while preserving the ST5 platform's flexibility and accessory compatibility. Both versions are intended for drivers who value integrated equipment options and a customizable GT racing helmet configuration. Ideal Applications for the Stilo ST5 GT Composite The ST5 GT Composite is designed for a wide range of automotive motorsport applications: GT Racing: Wide eyeport, noise-attenuating earmuffs, and optional communication integration. Endurance Racing: Compatible hydration, air-cooling, and radio accessory systems. Club Racing: Full-face construction and recognized Snell and FIA certifications. Track Days and HPDE: Comfortable, secure helmet design for performance driving. Touring Car Racing: Wide field of vision and modular communication options. Time Trials: Lightweight construction and supportive interior fit. Sprint Racing: Professional motorsport helmet features for competitive driving sessions. Always confirm that the helmet's Snell SA2020 and FIA 8859-2015 certifications remain accepted by your racing organization. Stilo ST5 GT Composite Frequently Asked Questions What certifications does the Stilo ST5 GT Composite have? The ST5 GT Composite carries Snell SA2020 and FIA 8859-2015 certifications. Confirm that these standards are accepted for your intended racing application. Is the Stilo ST5 GT Composite made from carbon fiber? The ST5 GT Composite uses a fiberglass/Kevlar Multi Sandwich Fiber shell. The ST5 GT Carbon is a separate model featuring carbon fiber construction. Does the Stilo ST5 GT Composite include HANS anchors? The helmet includes factory-installed M6 threaded receivers, but compatible HANS/FHR anchor posts are sold separately. Does the ST5 GT Composite come with a visor? Yes. A clear 3mm anti-fog visor is included. Can I install tinted or mirrored shields? Yes. Compatible Stilo ST5 and ST5.1 replacement shields are available in several optional finishes. Does the ST5 GT include built-in communications? The standard helmet includes accessory ports and removable earmuffs. Radio electronics, microphones, speakers, and compatible communication kits are available separately. Can I install a hydration system? Yes. The integrated side accessory ports support compatible Stilo hydration components. Can the ST5 GT Composite use a forced-air cooling system? Yes. Compatible side-air and top-air accessories allow integration with selected external cooling systems. Are the cheek pads removable? Yes. The comfort cheek pads can be removed or replaced with compatible Stilo components. Does the helmet include noise-attenuating earmuffs? Yes. Removable earmuff cushions are included to help reduce unwanted cockpit noise. What is the head shape of the ST5 GT Composite? The helmet has an Intermediate Oval interior profile. Proper fit should be confirmed by measuring and trying on the helmet. How many shell sizes does the ST5 GT Composite have? The helmet uses two exterior shell sizes. The smaller shell accommodates sizes 54 through 59, while the larger shell accommodates sizes 60 through 64 in the manufacturer's listed size options. Can I use ST5 replacement visors on an ST5.1 helmet? Stilo lists ST5 and ST5.1 visor compatibility for the corresponding shield family. Always verify the specific visor part number before ordering. Does the Stilo ST5 GT Composite include a helmet bag? Yes. A helmet bag is included with the standard helmet package. What is the difference between the ST5 GT Composite and ST5 GT Carbon? The Composite version uses fiberglass/Kevlar construction, while the Carbon model uses carbon fiber construction. Both share the modular ST5 GT design and compatible accessory systems. Is the Stilo ST5 GT Composite suitable for endurance racing? Yes. Its modular communication, hydration, and cooling compatibility make it well suited to endurance racing where the helmet's certification is accepted. Why Choose the Stilo ST5 GT Composite Racing Helmet? The Stilo ST5 GT Composite Snell SA2020 Racing Helmet delivers an outstanding combination of protective construction, comfortable interior design, excellent visibility, and integrated accessory versatility. From track-day driving to competitive endurance racing, its fiberglass/Kevlar composite shell, noise-attenuating earmuffs, wide eyeport, and modular side ports provide a configurable platform for drivers with a wide variety of racing requirements. Choose the ST5 GT Composite for proven Stilo engineering, professional motorsport performance, and the flexibility to build a helmet setup around your driving needs.

Sabelt TB-11 Zero Gravity Race Shoe The Sabelt TB-11 Zero Gravity Race Shoe is an ultra-lightweight professional racing shoe designed for drivers who want maximum pedal feel, breathable comfort, and FIA-approved protection. Weighing just 184g in UK size 8 / EU 42, the TB-11 Zero Gravity is built to feel incredibly light while still delivering the support, grip, and safety needed for serious competition. Made in Italy with a fire-retardant printed fabric upper, carbon fiber insole, 3D honeycomb internal structure, and an ultra-thin high-grip sole, the Sabelt TB-11 Zero Gravity gives drivers a precise connection to the pedals. It is designed for racers who want a lightweight shoe that stays comfortable through long sessions without sacrificing control. Sabelt TB-11 Zero Gravity Race Shoe Features FIA 8856-2018 approved for motorsport competition use. Ultra-lightweight design weighs just 184g in UK size 8 / EU 42. Made in Italy with premium motorsport craftsmanship. Fire-retardant printed fabric upper reduces weight while maintaining protection. Carbon fiber insole provides the ideal balance of stiffness and pedal dexterity. 3D honeycomb internal construction improves airflow and comfort. Ultra-thin high-grip sole enhances pedal sensitivity. Oil-resistant sole construction is built for racing environments. Lightweight quick lace-up system delivers a secure, fast fit. Designed for professional racing, club racing, endurance racing, and track use. Ultra-Lightweight Racing Performance The TB-11 Zero Gravity is built for drivers who want to save weight without giving up safety or feel. At only 184g in UK size 8 / EU 42, this shoe gives the driver a barely-there fit while maintaining the structure needed for controlled braking, throttle modulation, and smooth pedal transitions. Carbon Fiber Insole The carbon fiber insole is designed to give drivers a precise balance of stiffness, flexibility, and pedal sensitivity. This helps improve feedback through the brake, throttle, and clutch pedals so the driver can make more accurate inputs in the car. Breathable 3D Honeycomb Interior The 3D honeycomb internal structure helps airflow move through the shoe, reducing heat buildup during long stints and hot cockpit conditions. This breathable design helps keep the driver more comfortable and focused during demanding race sessions. Ultra-Thin High-Grip Sole The ultra-thin sole is designed for direct pedal feel and confident grip. Its high-grip, oil-resistant construction helps maintain traction on the pedals while supporting the sensitivity drivers need for smooth and accurate control. Quick Lace Closure The lightweight quick lace-up system helps secure the shoe quickly and evenly around the foot. This closure system keeps the fit snug without adding unnecessary bulk, making the TB-11 Zero Gravity easy to tighten before heading to grid. FIA 8856-2018 Approved Protection The Sabelt TB-11 Zero Gravity Race Shoe is FIA 8856-2018 approved for motorsport competition. The fire-retardant fabric upper and race-focused construction provide modern protection while keeping the shoe extremely light and breathable. Sabelt TB-11 Zero Gravity Race Shoe Specifications Approval: FIA 8856-2018 Weight: 184g in UK size 8 / EU 42 Upper: Fire-retardant printed fabric Insole: Carbon fiber insole Interior: 3D honeycomb internal construction Sole: Ultra-thin, high-grip, oil-resistant sole Closure: Lightweight quick lace-up system Origin: Made in Italy Use: Auto racing, endurance racing, club racing, track days, and competition driving Sabelt TB-11 Zero Gravity Race Shoe Sizing Chart Sabelt TB-11 Zero Gravity Race Shoe FAQs Are the Sabelt TB-11 Zero Gravity Race Shoes FIA approved?Yes. The Sabelt TB-11 Zero Gravity Race Shoe is FIA 8856-2018 approved for motorsport competition use. How much does the Sabelt TB-11 Zero Gravity weigh?The TB-11 Zero Gravity weighs just 184g in UK size 8 / EU 42, making it an extremely lightweight racing shoe. Does the TB-11 Zero Gravity have a carbon fiber insole?Yes. It features a carbon fiber insole designed to balance stiffness, flexibility, and pedal sensitivity. Are these shoes comfortable for long races?Yes. The lightweight construction, breathable 3D honeycomb internals, and quick lace fit make the TB-11 Zero Gravity well suited for long sessions and endurance racing. What kind of sole does the TB-11 Zero Gravity use?It uses an ultra-thin high-grip sole that is oil resistant and designed to maximize pedal feel. Where are the Sabelt TB-11 Zero Gravity Race Shoes made?The Sabelt TB-11 Zero Gravity Race Shoes are made in Italy.

Paragon Viking Pro Air & Water Cooler The Paragon’s Viking Pro Cooler is the amped-up version of the Viking Cooler. The Viking Pro Cooler is built to be durable and efficient with its 12-volt pump providing constant circulation of cold water through Paragon cooling garments. The addition of a u-shaped aluminum air tube inside the cooler, designed specifically for helmet cooling, when connected to a blower system, is what makes this Paragon’s Pro version. The side exit Guardian bulkhead connectors are Paragon’s emergency release option allowing an easy disconnect when a quick pull motion is applied to the connected hose set or garment. The Viking Pro Cooler is available in a 12L or 18L option and works seamlessly with most cool suit brands. Click here for installation instructions. Paragon Pro Air & Water Cooler Dimensions 12 Liter: 10 lbs, 19" x 13" x 13" 18 Liter: 10 lbs, 19" x 13" x 13" Paragon cooling garments sold separately.

Paragon Complete Viking System All-In-One Kit Discovery Parts assembled this kit putting everything you need to reduce fatigue, reaction time, and dehydration all in one place! Anyone who uses a Paragon system will tell you, once you race with one you'll never race without it. Our Complete Viking System All-In-One Kit makes it easy to assemble everything you need, and you save money versus buying the pieces separately! Viking coolers have been seriously upgraded in recent years, with new encapsulated pumps rated for an incredible 25,000 hours of continuous operation. Each Paragon Complete Viking System Kit includes the following: Your choice of a 12- or 18-liter Paragon Viking system cooler A Paragon cooler mounting tray 16 oz. of Defense Solution Maintenance Additive to keep you system sanitary A Paragon Guardian 8-foot insulated water supply/return hose The Paragon Complete Viking System is the preferred choice for racers at all levels of the motorsport. Whether you race with NASA, PCA, SCCA, IMCA, Chump Car, LeMons, WRL or any other organization, this system's ease of use and unparalleled quality will keep you performing at your peak. Paragon Cooling Water Shirts (Sold Separately) A variety of Paragon cooling shirts are available separately to create a complete driver cooling package customized to your needs! The Paragon Cooling Water Shirt contains about 50 feet of medical-grade capillary tubing securely stitched on the front and back of the shirt, covering up to 40% of the body. It connects to the cooler via insulated hose with dry quick-disconnects. You can upgrade to the Paragon Pro Cooling Shirt with double the tubing of the standard Paragon Short Sleeve shirt. This provides even more efficient heat transfer, keeping your core temperature stable for longer. Or combine cooling with fire protection by adding Paragons's newest SFI 3.3 Rated Ignite Pro FR shirt with the same double-tubing sewn into a long-sleeve SFI 3.3 flame-resistant shirt. Paragon Viking Cooler Details: 12-liter: 7 lbs, 16" x 10" x 12" 18-liter: 9 lbs, 17" x 11" x 14"

Paragon Arctic Wolf Pro Portable Bag Cooler Paragon’s Arctic Wolf Pro Cooler Bag is the amped-up version of their Arctic Wolf Cooler Bag, one of the most versatile portable cooling bags on the market. The Arctic Wolf Pro Cooler Bag takes driver cooling performance up a notch, with an interior heavy-duty bladder that houses a 12V pump and more capacity for ice and cooling water. Yet it weighs only 5 lbs. including the Li-ion battery! The front-exit Guardian bulkhead connectors are Paragon’s emergency release option, allowing the driver to easily disconnect with a quick pull on the connected hose set. The Arctic Wolf Pro Cooler Bag is available in either a 6L or 10L (1.6 gal. or 2.6 gal.) capacity, and it works seamlessly with most cool suit brands. Paragon Arctic Wolf Pro Portable Bag Cooler Details Manufacturer: Paragon Manufacturer part nos.: 11-24000 (6L) or 21-24000 (10L) Included Battery: 7.4V Li-ion rechargeable Battery Charger: included Weight: 5 lbs. Dimensions in inches: 16x12x8 (6L) or 18x14x8 (10L) Developed for use in all types of racing, the Paragon Arctic Wolf Pro Cooler Bag provides drivers with a no-compromise personal cooling solution in race cars that have limited space or no place to mount a standard, hard-sided cooler. The Arctic Wolf Pro Cooler Bag is especially convenient for road racers and track-day enthusiasts with more than one car, as it's easily moved from one car to another as needed. Drag racers are also discovering its versatility, and it has also become very popular with driving-school instructors with its Lithium-ion battery powered portability. The Arctic Wolf Pro Cooler Bag provides the same superior cooling as Paragon's legendary fixed-cooler systems. It keeps drivers cool and mentally alert, especially during those final laps when heat fatigue and dehydration can be at their worst.

Alpinestars GP Tech v3 Driver Race Suit The Alpinestars GP Tech v3 race suit features an outer shell twill material developed exclusively for Alpinestars, combined with an innovative aramidic-based knit lining for optimum levels of comfort, protection, light weight, and comfort. Thanks to this aramidic base lining with its open-weave structure, plus breathable mesh side panels, this Alpinestars GP Tech v3 is superb at maintaining air flow and regulating body temperature. The Alpinestars GP Tech v3 race suit also incorporates lightweight stretchable panels at the center back, lower back, elbows, crotch, and knee areas to provide great flexibility both in and out of the car. Alpinestars GP Tech v3 Race Suit Protection Certified to the latest FIA 8856-2018 homologation standard Super lightweight and breathable multi-layer suit incorporating thin stretchable panels for maximum comfort and effective regulation of body temperature Nomex antistatic outer shell fabric for exceptional heat- and flame-resistance Laundry bag included for convenience and effective material fiber protection Alpinestars GP Tech v3 Race Suit Construction Strategically positioned Formula One derived stretch panels on the center back and spine, lower back, elbows, crotch and knees for enhanced maneuverability both in and out the car. Alpinestars fully-floating arms with stretchable knit fabric ensure minimal material resistance while driving Soft, thin wrist and ankle cuffs for maximum comfort and reduced weight Soft knit collar with secure hook-and-loop closure for improved comfort Alpinestars exclusive shoulder epaulette construction provides for effective driver extraction in the event of a crash Printed logos help maintain outer material integrity and reduce weight Alpinestars GP Tech v3 Race Suit Details Manufacturer: Alpinestars Manufacturer part no.: 3354120 Premium YKK lightweight zipper with Alpinestars leather pull and double slider for a versatile, customizable fit. Thigh pockets for convenient, unobtrusive storage. Athletic fit Weight: 325g/m2 Alpinestars GP Tech v3 Driver Race Suit Sizing Chart

Sabelt HERO PRO TB-10.1 Race Shoe The Sabelt HERO PRO TB-10.1 Race Shoes are premium professional racing shoes designed for drivers who want lightweight comfort, precise pedal control, and Italian-made craftsmanship. Built with ultrathin kangaroo leather, a honeycomb 3D lining, aramidic laces, and an ultra-flat sole, the HERO PRO TB-10.1 gives drivers the connection and feel needed for serious track use. Designed for maximum pedal sensitivity, the HERO PRO TB-10.1 combines flexible construction with a removable carbon fiber insole and natural rubber sole. The result is a lightweight, breathable racing shoe that supports confident braking, throttle modulation, and smooth pedal transitions during long sessions and competitive driving. Sabelt HERO PRO TB-10.1 Race Shoe Features Made in Italy with premium motorsport craftsmanship. Ultrathin kangaroo leather upper for lightweight comfort and flexibility. Soft perforations help improve ventilation and breathability. Honeycomb 3D lining supports airflow and comfort during long sessions. Super flexible Strobel construction improves pedal sensitivity. Ultra-flat outer sole enhances pedal feel and driver control. Removable carbon fiber insole laminated in an autoclave. Natural rubber sole provides responsive feel and grip. Anti-abrasion reinforcements improve protection and durability. Aramidic laces provide a secure, motorsport-ready fit. Padded ankle and tongue improve comfort and support. Available in black, blue, red, and white. Available in sizes 36 through 48. Ultrathin Kangaroo Leather Construction The HERO PRO TB-10.1 uses ultrathin kangaroo leather to deliver a lightweight and flexible feel without losing the premium support expected from Sabelt racing footwear. This material helps the shoe conform closely to the foot, improving comfort and driver confidence inside the cockpit. Breathable Honeycomb 3D Lining Soft perforations and a honeycomb 3D lining help improve airflow around the foot. This breathable design is especially useful during long track sessions, endurance racing, and hot cockpit conditions where comfort can directly affect driver focus. Flexible Strobel Construction The super flexible Strobel construction helps create excellent pedal sensitivity. By allowing the shoe to move naturally with the driver’s foot, the HERO PRO TB-10.1 helps improve the connection between the driver and the pedals for more precise inputs. Ultra-Flat Sole for Pedal Feel The ultra-flat outer sole is designed to enhance pedal feel and control. Whether managing brake pressure, throttle application, or quick pedal transitions, the HERO PRO TB-10.1 gives drivers a responsive platform for accurate footwork. Removable Carbon Fiber Insole A removable carbon fiber insole laminated in an autoclave adds lightweight performance and support. This feature helps give the shoe a refined, high-end feel while maintaining the flexibility and sensitivity needed for competition driving. Protection and Durability Anti-abrasion reinforcements help protect key wear areas and improve durability. The padded ankle and tongue add comfort and support, while the aramidic laces keep the shoe secure during aggressive driving. Sabelt HERO PRO TB-10.1 Race Shoe Specifications Material: Kangaroo leather Lining: Honeycomb 3D lining Sole: Natural rubber ultra-flat sole Insole: Removable carbon fiber insole Closure: Aramidic laces Construction: Super flexible Strobel construction Protection: External anti-abrasion reinforcements Comfort: Padded ankle and tongue Colors: Black, blue, red, and white Sizes: 36 to 48 Origin: Made in Italy Sabelt HERO PRO TB-10.1 Race Shoe FAQs What makes the Sabelt HERO PRO TB-10.1 good for pedal control?The super flexible Strobel construction, ultra-flat sole, and lightweight materials help improve pedal sensitivity so drivers can better feel brake, throttle, and clutch inputs. Are the Sabelt HERO PRO TB-10.1 shoes comfortable for long races?Yes. The ultrathin kangaroo leather, soft perforations, honeycomb 3D lining, padded ankle, and padded tongue are designed to improve comfort during long sessions and endurance racing. What material is used in the upper?The HERO PRO TB-10.1 uses ultrathin kangaroo leather for a lightweight, flexible, and premium feel. Does this shoe have a carbon fiber insole?Yes. The Sabelt HERO PRO TB-10.1 includes a removable carbon fiber insole laminated in an autoclave. What colors are available?The Sabelt HERO PRO TB-10.1 Race Shoes are available in black, blue, red, and white. What sizes are available?The Sabelt HERO PRO TB-10.1 Race Shoes are available in sizes 36 through 48. Sabelt Hero Pro TB-10.1 Racing Shoes sizing Chart

Paragon Arctic Fox Pro 6 Liter Li-Ion Bag Cooler Paragon’s Arctic Fox Pro Cooler Bag is the amped-up, battery-powered version of their 6-liter Arctic Fox Cooler Bag, one of the most versatile portable cooling bags on the market. The Arctic Fox Pro Cooler Bag takes driver cooling performance up a notch, with an interior heavy-duty bladder that houses a 12V pump and more capacity for ice and cooling water. Yet it weighs only 4 lbs. including the Li-ion battery! The front-exit Guardian bulkhead connectors are Paragon’s emergency release option, allowing the driver to easily disconnect with a quick pull on the connected hose set. The Arctic Fox Pro Cooler Bag has a 6L capacity, and it works seamlessly with most cool suit brands. Paragon Arctic Fox Pro Portable Bag Cooler Details Manufacturer: Paragon Manufacturer part nos.: 61-24000 Included Battery: 7.4V Li-ion rechargeable Battery Charger: included Interior capacity: 6 liters Weight: 4 lbs. Dimensions in inches: 12x10x10 Developed for use in all types of racing, the Paragon Arctic Fox Pro Cooler Bag provides drivers with a no-compromise personal cooling solution in race cars that have limited space or no place to mount a standard, hard-sided cooler. The Arctic Fox Pro Cooler Bag is especially convenient for road racers and track-day enthusiasts with more than one car, as it's easily moved from one car to another as needed. Drag racers are also discovering its versatility, and it has also become very popular with driving-school instructors with its Lithium-ion battery powered portability. The Arctic Fox Pro Cooler Bag provides the same superior cooling as Paragon's legendary fixed-cooler systems. It keeps drivers cool and mentally alert, especially during those final laps when heat fatigue and dehydration can be at their worst.

Sabelt F12 8855-2021 Side Mount Brackets Laser cut from high-strength aluminum, these lightweight seat brackets are ideal for mounting most side-mount style racing seats. FEATURES: FIA 8855-2021 Homologated Includes mounting bolts    

Sabelt Four-Point Harness DESIGNED FOR PORSCHE CARBON BUCKET SEATS Built specifically for the Porsche GT2 and GT3, these four-point harnesses provide the safety and security you've come to expect from Sabelt in a package that makes adding harnesses to your Porsche extremely fast and easy. Each harness is easily adjusted using the bright yellow pull-down tabs, so securing and releasing your harness is simpler than ever. A number of other handy features have been added, including communication wiring/hydration tube routing on top of shoulder straps and silicone grip on the underside to keep your head-and-neck restraint device securely in place while on the track. Sabelt is an industry leading manufacturer of motorsports harnesses and accessories, for good reason. PORSCHE 4-POINT HARNESS FEATURES This harness is neither FIA nor SFI certified, and is not intended for sanctioned competition use. Easily adjusted using the yellow pull-down straps. Velcro patches on shoulder straps for securing loose ends. Communication/hydration routing on shoulder belts keep lines secure and out of the way.

Paragon Ignite Pro FR SFI 3.3 Rated Cooling Shirt The Paragon Ignite Pro FR is the long-sleeve, amped-up version of Paragon’s Ignite cooling top and includes double the tubing compared to the Paragon Ignite top. The Paragon Ignite Pro FR cooling top is the premier choice when prioritizing cooling capacity over ice retention. The garment is a 4.8 oz Modacrylic and FR Rayon blend with intense quick-drying qualities and ample tubing to cover your core. Keep Cool With SFI 3.3 Rated Protection The Paragon Ignite Pro FR long sleeve cooling top meets SFI 3.3 specifications. Available in sizes Small through XXL with a true-to-size fit and right- or left-exit tubing. Paragon also offers the unique option of adding tubing to the sleeves of the Ignite Pro FR when cooling more than just the core is needed. Compatible with the full line of Paragon cooling systems and accessories. If you have ever wanted more cooling, the Paragon Ignite Pro FR series is for you. Paragon Ignite Pro FR Cooling Shirt Details Manufacturer: Paragon Flame resistance rating: SFI 3.3 certified Tubing exit: choose left- or right-exit Construction: Modacrylic/FR Rayon blend for superior moisture wicking Anti-microbial: Ag47 protection Double the tubing of standard cooling shirt Won’t shrink, pick, or fade Extra length Clean seams for all-day comfort Machine wash, machine dry

Antigravity VTX-20 — Lithium 16V Motorsports Battery Ultra-light, high-power 16-volt racing battery in a compact YTX12 case. The Antigravity VTX-20 16-Volt Lithium Battery delivers huge cranking power in the smallest, lightest package you’ll find for motorsports. Built for race vehicles that run 16V systems, the VTX-20 weighs just ~5.15 lbs and packs 500 Cranking Amps in a compact YTX12 case—ideal when every pound and every inch matters. Actual voltage is ~16.5V for a hot, reliable spark. Serious power-to-weight: ~5.15 lbs with 500 CCA-equivalent cranking performance. Compact footprint: YTX12 case size fits tight race bays and lightweight builds. Race-proven 16V output: stronger spark and faster starts for competition engines. Low self-discharge: can hold a charge up to a year (no parasitic drains present). Durable hardware: large all-brass terminals for secure, low-resistance connections. Cost-effective weight loss: drop up to ~28 lbs in race cars vs. typical lead-acid. Important: The VTX-20 is for 16-volt systems only and racing applications. Not for passenger/street cars. Charge with a 16V LiFePO4-compatible charger only (e.g., Antigravity 16V 5A). Features Ultra-lightweight, high-power LiFePO4 motorsports battery Most compact/powerful 16V lithium battery in its class Up to ~28 lb weight savings in race cars (~14 lb in motorcycles) Can hold a charge up to 1 year with no parasitic drains Large all-brass terminal design for robust, low-loss connections Suitable for vehicles using 16V systems (confirm application) Best Uses Race vehicles using 16-volt electrical systems Excellent for dedicated race cars Not for passenger cars or street-use automobiles Specifications Antigravity VTX-20 — 16V Lithium Battery Case / Size YTX12 | 5.9 x 3.43 x 5.12 in (L×W×H to top) Voltage (Actual) ~16.5V (16V system) Cranking Power 500 Cranking Amps Capacity 25Ah Pb-Eq / 12.5Ah Actual / 200Wh Weight ~5.15 lbs Terminals Large all-brass posts Chemistry Lithium Iron Phosphate (LiFePO4) Usage & Charging Use only a 16V LiFePO4-compatible charger (CC/CV profile). Before storage, fully charge and disconnect parasitic loads (alarms, ECUs, trackers, etc.). Securely mount the battery; verify terminal torque and cable strain relief. Recommended Pairing For fastest, safest top-offs between sessions, pair with the Antigravity 16V Lithium Charger — 5A (110–230V AC, multiple protections, LED status with voltage/current screen). What’s in the Box Antigravity VTX-20 16V Lithium Battery (YTX12 case) Terminal hardware Quick-start/usage guide FAQs Will this work on my street car?No. The VTX-20 is intended for race vehicles using 16-volt electrical systems. How long can it sit between events?Up to ~1 year if there are no parasitic drains. Disconnect or manage accessories that pull current when parked. Which charger should I use?A dedicated 16V LiFePO4 charger only (e.g., Antigravity 16V 5A). Do not use 12V chargers. Need sizing or wiring advice? Our motorsports team can help you integrate a 16V system for your class and build.Discovery Parts | sales@discoveryparts.com | (888) 748-7223

Alpinestars GP Race v2 Driver Suit The GP Race v2 Suit is a multi-layer race suit developed for all-round drivers racing in advanced competitions. Compliant with the new FIA Standard 8856-2018, the GP Race v2 Suit has an athletic regular fit and has a three-layer construction; one layer of aramidic twill and two layers of aramidic base knit. This assembly offers an increase of 5% in breathability performance, while still maintaining a light weight at 400 g/m2. The suit also incorporates knitted stretch panels for maximum comfort on the armholes, lower back and crotch areas, with a larger and longer back panel to really aid driver flexibility and range of movement, while the internal flat seam, fully floating arm and extended shoulders provide even greater levels of driver comfort. ALPINESTARS GP RACE V2 SUIT PROTECTION Certified to the new FIA 8856-2018 homologation standard. Alpinestars fully floating arm construction with stretchable knit fabric ensures minimal material resistance while driving. Includes laundry bag for convenience and effective suit fiber protection. ALPINESTARS GP RACE V2 SUIT CONSTRUCTION Multi-layer lightweight suit incorporating knitted stretchable panels for maximum comfort and excellent breathability. Aramidic knitted stretchable panels on back, waist and crotch for enhanced comfort and ease of movement. Ergonomic collar with soft knitted lining for extended coverage and maximum comfort. 100% Aramidic outer shell fabric for exceptional heat and flame-resistant proprieties. Adjustable collar and belted waist ensure a precise fit. Anatomical arm, leg and torso patterned paneling for an optimum fit in the driving position. Alpinestars exclusive shoulder epaulette construction provides for the extraction of the driver in the event of a crash. ALPINESTARS GP RACE V2 SUIT KEY FEATURES Ribbed, stretchable wrist and foot cuffs for optimum comfort. Premium YKK double slider zipper for a versatile and customizable fit. Thigh pockets for convenient, peace-of-mind storage. Regular fit design. Weighs 400 g/m2 SKU 3355020