New products

SPA 1/8NPT x 6mm Fitting SPA 6mm fitting to connect 6mm Decabon tubing to 1/8 NPT. This is the fitting used on the electrical fire bottle assembly when using 6mm tubing and on 6mm nozzles. SPA 1/8NPT x 6mm Fitting Details: Manufacturer: SPA Technique Manufacturer part number: 02-021 Trade name: 1/8 NPT to 6mm Decabon fitting Can I run this SPA 6mm fitting with my aluminum line from another manufacturer? NO. SPA tubing and fittings are unique to themselves and are not interchangeable with other manufacturers. [img-12757-left-large_default]

SPA Label For Non-Homologated AFFF Systems SPA Technique label for SPA Technique AFFF fire bottles that are not FIA homologated. LABEL DETAILS Manufacturer: SPA Technique Manufacturer Part Number: 02-SP-153

SPA Label For AFFF Systems Homologated #EX.003.98 (1998-2017) SPA Technique label for AFFF systems homologated under FIA #EX.003.98. For FIA-approved SPA Technique bottles from 1998 through 2017. LABEL DETAILS Manufacturer: SPA Technique Manufacturer Part Number: 02-SP-101

SP Extreme Novec SFI 17.1 Fire System 5lb. Light Weight Mechanical The SPA Technique EX SFI5-LW bottle weighs only 6.7 lbs. filled and ready to use. Filled with lightweight Novec 1230 suppression agent, this mechanically discharged fire system not only carries an SFI 17.1 rating, but it keeps weight to an absolute minimum for lightweight race cars that still need the ultimate in fire protection. The SPA Technique Extreme Novec 1230 5lb. SFI 17.1 certified fire system is the next generation of light weight race car fire suppression. The new 3M Novec 1230 is not only safer for the driver, but also the Earth. All while being non-conductive (i.e., safe for electronics) and leaving no residue. If you want the safest race car fire system, the SPA Technique Novec 1230 Extreme systems are your first choice. Installation of your SPA Technique 5lb. SFI 17.1 system is easy because your kit includes everything you will need for a easy and safe installation. A completely filled light weight SFI 17.1 certified and labeled bottle is included, as are the two stainless steel retaining straps. For discharge, two simple-to-connect electrical discharge switches are included. One is usually mounted externally on the cowl and the other in the cockpit near the driver. The cabling is long enough to mount the lightweight aluminum bottle where you and your crew chief want it. This complete fire system includes four nozzles, three T-fittings, one bulkhead fitting, and ten feet of easy-to-install tubing. There is even a new "E" decal to make the grumpiest tech chief happy. SPA Technique fire systems are the perfect choice for drivers that want the best in light weight SFI 17.1 certified fire safety. This pressurized SPA Technique fire system can only be shipped via Ground. SPA Extreme Novec SFI 17.1 Fire System 5lb. Light Weight Mechanical Details: Manufacturer: SPA Technique Manufacturer part number: EX2SFI5-LW Discharge 1: Mechanical cable 6' Discharge 2: Mechanical cable 12' Certification: SFI 17.1 Agent: Novec 1230 Toxic: No Conductive: No Clean-up required: No SPA Extreme Novec SFI 17.1 Fire System 5lb. Light Weight Mechanical Contents: Two Discharge Nozzles Ten Feet of Lightweight Tubing One T-fitting One Bulkhead fitting One 12-foot Pull Cable Two E-stickers (one large, one small) Two Bottle Mounts Two Anti-Torpedo Brackets SPA Extreme Novec SFI 17.1 Fire System Benefits: A few of the advantages of using NovecTM 1230 Fluid in place of other fire-suppression agents are as follows: Great fire-out properties Non-toxic, so safe for driver Non-conductive, so it's safe on all electronics No residue or clean-up Zero ozone depletion, making it safer for the environment

SPA Technique Electrical Firing Head Not For Customer Installation If you discharged your SPA Technique electrically-actuated fire system, this is the replacement SPA Technique electrical firing head. If you are servicing your SPA Technique fire system because the bottle has timed out per your rule book, you will not need this replacement firing head. Please do not discharge your electrically-controlled SPA Technique fire system to make the bottle lighter to ship. If you do you will have to add this firing head to our SPA Electrical AFFF Electrical Bottle Refill and Certification service. This item cannot be sold for customer installation. There are special tools and procedures necessary to properly and safely replace this FIA-approved part. We install this item with no added labor charge onto any serviceable SPA Technique fire bottle at our SPA-approved shop. We will not ship this item by itself. It must be installed by a qualified technician at Discovery Parts on a serviceable bottle. SPA Technique Electrical Firing Head Details: Manufacturer: SPA Technique Manufacturer part number: 02-SP-001 Actuation type: electrical only User serviceable: no

SPA Technique 1/8 NPT x 6mm 90º Fitting SPA 1/8 NPT to SPA 6mm Decabon 90-degree  connector fitting for 6mm Decabon tubing used with SPA firing heads. If you need to install a firing head in a tight location, this is the way to do it correctly. SPA 6mm Straight Connector Details: Manufacturer: SPA Technique Manufacturer part number: SP-021-90 Trade name: 1/8 NPT x 6mm 90 Fitting Usage: Installing a firing head 90 degrees from 6mm tubing Can I run this SPA Technique 90 degree connector fitting with my aluminum line from another manufacturer? No. SPA Technique Decabon tubing and fittings are unique unto themselves and are not interchangeable with products from other manufacturers.

Racing Radios Camera Audio Adapter w/ Audio Input Do you have a camera installed in your car and wish you could get the audio from your radio system synced up with the video? Would you like to listen to a second audio input from a RACEceiver or MP3 device all while maintaining perfect communications with your crew? Well guess what? We at Racing Radios have engineered the perfect solution for you. The RRC-AUX-IO is an adaptor cable that plugs inline with your helmet cable. The adapter has a 3.5MM audio input and it also has another 3.5MM audio output for connecting to a camera. The input jack is perfect for connecting a RACEceiver or other listening device for those required to monitor the series' radio traffic. The audio output jack will connect the driver's microphone audio and the Racing Radios in-car radio's receive audio to the camera system. The audio you'll hear on the video is incredible! DETAILS Manufacturer: Racing Radios Manufacturer part number: AUX-IO Connector 1 / Helmet Side: IMSA 4C Female Connector 2 / Chassis Side: IMSA 4C Male Audio in: 3.5mm female Audio out: 3.5mm female

Racing Radios IMSA to Headset Cable Racing Radios coiled headset cable to connect a headset 5 pin connector to an IMSA (4C) female harness. The 5-Pin male connector, called a Switchcraft connector is adapted to an IMSA 4X plug, also called a Nexus 4-pin plug. The Racing Radios RDH-125 connects your headset to IMSA wired radio harness or IC cable. DETAILS Manufacturer: Racing Radios Manufacturer part number: RDH-125 Cord type: Coil End 1: IMSA 4C Male End 2: 5-Pin headset male for headset or car harness, also called a 5 Pin Switchcraft connector

Motorola Mobile Harness Interface The Motorola Mobile Harness Interface is used to connect a Motorola base unit radio to the X-1000 Advanced Expandable Intercom. Motorola Mobile Harness Interface Details: Manufacturer: Motorola Manufacturer part number: MOT-MJ Connects: Motorola base unit to X1000 intercom

Speedcom X-1000 Advanced Expandable Intercom The Speedcom X-1000 advanced expandable intercom is the most complete intercom in the market today. Featuring 2 or 4 place operation and expandable up to 8 or 12 places with optional expansion modules (sold separately) along with radio patch, cell phone input, audio in and out, this intercom has no match. Great for driving schools, off road racing, SUV, UTV, sand rails, and dune buggies. The Speedcom X-1000 can also be adapted for use on a pit stand Speedcom X-1000 Advanced Expandable Intercom Details: Manufacturer: Speedcom Manufacturer part number: SCC-X1000 Music in with auto-muting RF shielded extruded housing High-output amplifier for exceptional sound quality Isolated grounds to eliminate ground loop noise issues Adjustable mounting brackets Adjustable VOX control Side tone Cell phone input (requires additional cable, sold separately) Radio patch (requires additional cable and PTT button, sold separately

Stilo to IMSA Adapter Cable w/ Driver ID (4C to 5C) Connect your Stilo helmet to your IMSA driver ID radio systems where the car harness has a 5C driver id harness. This special Driver ID cable has a 5th conductor for the officials use to identify the driver in the vehicle. Each cable is custom built and has a special resistor with a four position micro-switch that is decoded to what driver is assigned to the vehicle, #1, #2, #3, #4. DETAILS Manufacturer: Racing Radios Manufacturer part number: RRC-ST50 Helmet end: Stilo 4C Chassis end: IMSA 5C (4C radio communications and 1C driver id) Cord type: Coil How do you change the assigned driver position from 1/2/3/4? Simply unthread the collar of on of the male ends and change the micro-switch to your assigned position. This cable is used in the WeatherTech or Michelin Sportscar Challenge and other series that uses the driver ID system. This is a special cable because it is a 5C (red connector) and different than your standard IMCA connection found in your SCCA/NASA/PCA race car.

SPA Technique AFFF Fire Suppression Nozzle The SPA Technique AFFF Nozzle is a replacement discharge nozzle designed specifically for SPA Technique FireSense and FireSense+ SFI-certified fire suppression systems. This nozzle is intended for use with compatible SPA Technique AFFF-based racing fire suppression systems and provides the correct replacement component when servicing, repairing, or reconfiguring an existing system. SPA Technique fire suppression systems are certification-specific, so it is important to use components designed for the exact system and extinguishing agent being serviced. This nozzle is intended specifically for compatible FireSense and FireSense+ AFFF SFI systems and should not be substituted for nozzles designed for other agents or certifications. Key Features Replacement AFFF Nozzle: Replacement discharge nozzle for compatible SPA Technique fire suppression systems. FireSense Compatible: Designed for use with SPA Technique FireSense AFFF systems. FireSense+ Compatible: Compatible with applicable SPA Technique FireSense+ systems. SFI System Application: Intended specifically for SPA Technique SFI-certified fire suppression systems. Service Replacement: Ideal for replacing a damaged, missing, or worn fire suppression nozzle. Motorsport Application: Designed for use with SPA Technique racing fire suppression equipment. Nozzle Only: This listing includes the replacement nozzle only and does not include tubing, fittings, bottle, activation components, or other fire system hardware. Compatibility SPA Technique FireSense fire suppression systems SPA Technique FireSense+ fire suppression systems AFFF-based systems Compatible SFI-certified SPA Technique fire suppression systems Important: SPA Technique fire suppression systems and components are certification-specific. Confirm that your existing system uses the correct AFFF nozzle before installation. What's Included 1 SPA Technique AFFF fire suppression nozzle Fire suppression bottle, tubing, fittings, activation components, and additional system hardware are not included. Important Safety Information Fire suppression system components should be installed and maintained according to SPA Technique instructions and the requirements of the specific sanctioning organization or racing series. Do not substitute nozzles between different fire suppression agents or system certifications unless specifically approved by the manufacturer. Always confirm system compatibility before replacing fire suppression components. FAQ What SPA Technique systems is this nozzle designed for?This nozzle is designed for compatible SPA Technique FireSense and FireSense+ AFFF fire suppression systems with applicable SFI certification. Is this nozzle compatible with SPA Extreme Novec systems?No. This is an AFFF nozzle intended for compatible FireSense and FireSense+ systems. SPA Technique offers separate components for systems using other extinguishing agents. Does this include the fire suppression tubing?No. This listing is for the replacement nozzle only. Tubing and other system components are sold separately. Can I use this nozzle with any SPA Technique fire system?No. SPA Technique fire suppression components are system and certification specific. Verify that your existing system is a compatible FireSense or FireSense+ AFFF SFI system before ordering. Is this a complete fire suppression system?No. This is a replacement nozzle only and does not include a fire bottle, extinguishing agent, tubing, activation hardware, or other system components. When should a fire suppression nozzle be replaced?A nozzle should be replaced if it is damaged, missing, obstructed, or otherwise unsuitable for continued use. Fire suppression systems should also be inspected and serviced according to the manufacturer's recommendations.

Spa Bulkhead Fitting - 8mm SPA Bulkhead fitting for 8mm Decabon tubing used with SPA fire systems. If you are running your fire discharge nozzle through a firewall or bulkhead, this is the way to do it correctly. If you run you Decabon tubing through a hole you just drilled, the hole (even with a grommet) will cold work the tubing and cause an early failure. A SPA Bulkhead fiting fits the hole perfectly and uses the push-lock fastning system to connect the 2 pieces. Can I run this SPA Bulkhead fitting with my aluminum line from another manufcaturer? NO. SPA tubing and fitings are unique to themselves and are not interchangeable with other manufacturers. SPA Bulkhead Fitting - 8mm Details: Manufacturer: SPA Technique MAnufacturer part number: 02-SP-029 Trade name: Bulkhead fitting Usage: Connecting 2 pieces of tubing through a firewall or bulkhead [img-9385-left-large_default]

SPA 8mm Straight Connector SPA straight connector fitting for 8mm Decabon tubing used with SPA fire systems. If you need to connect two 6mm decabon discharge lines, this is the way to do it correctly. This is also called a "straight union". Can I run this SPA straight connector fitting with my aluminum line from another manufacturer? NO. SPA tubing and fittings are unique to themselves and are not interchangeable with other manufacturers. SPA 6mm Straight Connector Details: Manufacturer: SPA Technique Manufacturer part number: SP-039 Trade name: Straight Union Usage: Connecting 2 pieces of tubing [img-9383-left-large_default]

Spa Decabon T Fitting - 8mm SPA T fitting for 8mm Decabon tubing used with SPA fire systems. If you are running your fire discharge outlet line and need to split it into 2 areas, this is the way to do it correctly. Can I run this SPA T fitting with my aluminum line from another manufacturer? No. SPA tubing and fittings are unique to themselves and are not interchangeable with other manufacturers. SPA Decabon Tee Fitting - 8mm Details: Manufacturer: SPA Technique MAnufacturer part number: 02-SP-028 Trade name: "T" Fitting Usage: Connecting 3 pieces of Decabon tubing together [img-9382-left-large_default]

SPA Decabon (Synflex) 8mm Metal/Composite Tubing per Ft Add Extra Length To Your 8mm Spa Fire System Using Synflex Tubing (formerly known as Decabon or Decoron 1300). Decabon / Synflex is easy to form, looks professional and is what is used in SPA fire suppression systems for discharge tubing. A thin aluminum inner layer is covered with a thick plastic outer layer. This combination provides the strength and rigidity of aluminum tubing with the light weight and corrosion resistance of plastic tubing. SPA Decabon (Synflex) 8mm Metal/Composite Tubing per Foot Details: Manufacturer: Spa Technique Manufacturer part number: 02SP032 8mm OD: 8mm Part of every SPA Technique Kit with 8mm tubing: Yes Bending Decabon: It is also considerably less expensive than tubing manufactured of corrosion resistant metal. Synflex can be bent by hand (no special tools required), but it will hold its shape like metal tubing. Cutting Decabon: It can be easily cut with a tubing cutter, wire cutters, or even a shop knife (expect to replace the shop knife blade after cutting this tubing). We cut the tubing in our warehouse using a small hand held tubing cutter below. Sold in continuous feet, cut lengths are not returnable.