New products

PFC 01 COMPOUND The Performance Friction PFC 01 compound is the standard by which all racing brake pads are judged. The PFC 01 has a very high initial bite and torque, with very little temperature-induced torque rise. At the end of braking, less torque scatter exists for improved modulation and excellent release. With its low-wear characteristics and excellent disc conditioning properties, it's no wonder the PFC 01 compound has won more World and National Championships than any other brake pad on the market! COMMON CALIPER FITMENTS: Manufacturer: Model: AP Racing CP2279 CP3620 CP3720 CP3788, CP3789 CP4890 CP5000 CP5835 CP5880 AP Racing (Essex) SC250 SC430

Molecule Race Car Detailing Spray Molecule Race Car Detail Spray is a light duty cleaner & polish in one spray, designed to keep surfaces looking clean, shiny and protected. Safe to use on all finishes, including paint, powder coat, plastics, vinyl, including flat, matte, and gloss. MOLECULE RACE CAR DETAILING SPRAY FEATURES Safely removes light rubber scuffmarks, bugs, oils, dirt and grime Reactive siloxane attaches to surface to polish without a slimy feel Reduces dirt, grime and grease build up Cleans & polishes in one easy step Just spray on & wipe off Non-streaking formula

Molecule Spray-On Race Car Cleaner Molecule Heavy Duty Cleaner is designed to keep all parts of your race vehicle and equipment clean. Safe to use on all finishes, including paint, powder coat, and plastics, whether flat, matte, or glossy. MOLECULE SPRAY-ON RACE CAR CLEANER FEATURES Safely removes rubber scuff marks, bugs, oil, dirt and heavy grime Non-toxic formula Non-corrosive, biodegradable and pH balanced Easy to use: just spray it on & wipe it off Non-streaking formula

Molecule Speed Cleaner-Detailer Kit 16 oz. Bundled kit of one Molecule Race Car Cleaner 16 oz. spray bottle and one Molecule Race Car Detailer 16 oz. spray bottle. This heavy-duty cleaner and fine detailer are designed to keep all parts of your race car and equipment clean. Formuated with a light-duty cleaner/polish designed to keep surfaces looking clean, shiny and protected. MOLECULE SPEED CLEANER & DETAILER KIT FEATURES Easy to use, just spray on and wipe off Non-streaking formula Reduces dirt, grime and grease surface build up Safely removes rubber scuff marks, bugs, oils, dirt and heavy grime Non-toxic, non-corrosive, biodegradable and pH balanced

Molecule Helmet Care Kit This specially-bundled kit from Discovery Parts makes it easy and safe to keep your racing helmet in top condition, clean and fresh. The light-duty Cleaner & Polish spray is designed to keep your helmet exterior shell clean, shiny and protected. Safe to use on all finishes, including flat and matte. Refresher spray keeps the inside of your helmet clean, while Anti-Fog helps to keep the inside of your visor clear. Rain Repel is excellent at keeping the outside of your visor clear and making it easy to clean off debris, bugs, etc. MOLECULE HELMET CARE KIT INCLUDES (1) Helmet CLEANER & POLISH 4 oz. (1) Helmet REFRESHER 4 oz. (1) Helmet RAIN REPEL 4 oz. (1) Helmet ANTI-FOG 4 oz.

Molecule Refresh Race Fabric Deodorizer Molecule Refresh gives your racing garments a quick breath of fresh air, reducing odors of all types on technical fabrics like Aramid and Nomex. Refresh is more than just a cover-up; it contains antimicrobial agents to inhibit the growth of odor-causing bacteria while maintaining fabric breathability. Cosmetics-grade, skin-friendly ingredients ensure that your race suit, underlayers, gloves, etc. stay comfortable. With its light, fresh scent, Molecule Refresh is recommended for technical fabrics, including Nomex. DETAILS Contains proprietary Pico12 suppression technology to inhibit growth of odors Reduces odors on all types of technical fabrics Cosmetic-grade, skin-friendly and sanitizing ingredients FDA compliant antimicrobial – BKC Maintains fabric breathability Light fresh scent 16 oz. size designed for larger surfaces, uniforms, bags and other equipment Molecule Refresh is a lightly scented spray specifically formulated to deodorize performance wear and equipment. Cosmetic-grade formula contains proprietary Pico12 suppression technology to attack odors at the source and inhibit growth. Containing benzalkonium chloride (BKC) sanitizing ingredient, Refresh keeps you clean, healthy and performing at your best. INSTRUCTIONS FOR USE Allow garment or equipment to air dry. Shake well and spray Molecule Refresh evenly, covering all surfaces. Allow garment to fully dry in a well-ventilated area before wearing. Becomes more effective with repeated use.

Molecule Complete Racing Garment Care Kit Everything you need to care for your gear is here in the Complete Care Kit, which contains a 16 oz. spray bottles of Molecule Wash, Refresher, and Protector along with a 4 oz. bottle of Spot Cleaner. Caring for your racing gear has never been easier. Molecule makes machine washing the best way to care for your high-performance racing apparel and technical fabrics. Ordinary laundry detergents contain additives that attract moisture, oils and stains on fabrics like Nomex and Aramid. Molecule is designed to remove even the toughest stains, maintain fabric integrity, and keep your racing suit, gloves, and other gear looking and smelling clean. MOLECULE WASH 16 oz Concentrated formula effectively cleans technical fabrics in standard washing machines Removes contaminants that can degrade fabric performance Recommended for technical fabrics like Nomex MOLECULE REFRESHER 16 oz Contains an antimicrobial agent to inhibit the growth of bacterial odors Reduces odors on all types of technical fabrics Cosmetic-grade, skin-friendly ingredients Light, fresh scent MOLECULE PROTECTOR 16 oz. Keeps gear cleaner and safer by resisting contaminants that can degrade fabric performance Fabric sunscreen reduces color fading caused by UV rays Sheds water, oils, fuels and dirt Spray on and tumble dry to create a durable protective coating MOLECULE SPOT CLEANER 4 oz Concentrated formula penetrates deeply Safely dissolve embedded spots and stains even oil For use with Molecule Wash

A2-075 Girodisc 2pc Rear Brake Rotors Fits Ferrari 599 GTB The Girodisc system is a direct replacement for the OE disc.No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum.  The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc.  The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.The rotor and hat have a floating mount system, which utilizes 8 or 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by grade 12 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.Once the Girodisc system is in place, simply replace the cast iron rotor when needed.  Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

A1-075 Girodisc 2pc Front Brake Rotors FITMENT: Ferrari 599 GTB with CCM rotors is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products the same or the next business day to ensure we meet your delivery deadline. The Girodisc system is a direct replacement for the OE disc however a different brake pad with an annulus (pad swept area) of 66mm or less must be used. This is done to keep the rotor weight at a reasonable level. If we manufactured a rotor with the same annulus as the OEM CCM rotors they would be far too heavy. The necessary pad shape is available from both Pagid and PFC. If there is a specific pad compound you're after, please contact us directly and we'll provide the correct part numbers. The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from Girodisc's own proprietary cast iron, poured in the USA and machined from start to finish in house. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc. The rotor and hat have a floating mount system, which utilizes 8 or 10 high-strength alloy steel drive pins, manufactured by Girodisc in the USA to their own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking while maintaining axial and radial float between the hat and disc. The pins are secured by Grade-12 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side, allowing the rotor to grow with heat expansion while eliminating the rattle and noise typically associated with floating rotors. This float also allows the rotor to self-center between the brake pads. Once the Girodisc system is in place, simply replace the cast iron rotor when needed. Sold/priced in pairs. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

A1-126 Girodisc 2pc Front Brake Rotors for Porsche 997 GT2/GT3/Cup FITMENT: Porsche 997 GT3 Cup Car Porsche 997.2 GT3/GT2's, with or without PCCB rotors is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors on all 997.2 GT3/GT2's, with or without the OEM PCCB rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (available from ), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

A2-156 Girodisc 2pc REAR Brake Rotors (OEM PCCB) PORSCHE 991 TURBO & 981 CAYMAN GT4 OEM PCCB This Girodisc system is a 390mm two-piece steel rotor and aluminum hat combination, a direct-replacement upgrade for the OEM PCCB brakes. The A2-156 will bolt directly to your Porsche and work perfectly with your OEM calipers. There are two main reasons for replacing your PCCB: first, the Girodisc rotors are designed to shed heat more effectively than the original rotors; second, the machined cast iron rotor rings are far more durable than the fragile OEM carbon-ceramic rotors. This is critical when you're swapping wheels on and off the car for track days or racing, because it's so easy to nick a carbon rotor and take a nice chunk out of it. When paired with the Girodisc A1-156 front rotors, your factory brake bias and ABS efficiency are maintained.  When used with Pagid or PFC performance brake pads, and RF1 brake fluid (also available from Discovery Parts), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum.  The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations.  The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.   The rotor and hat mount together through a floating mount system which utilizes eight to ten high strength alloy steel drive pins manufactured by Girodisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by Grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/priced per pair. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

A1-156 Girodisc 2pc 410mm Front Brake Rotors (replace OEM PCCB)   This Girodisc system is a 410mm two-piece steel rotor and aluminum hat combination, a direct-replacement upgrade for your car's OEM PCCB brakes1. The Girodisc A1-156 will bolt directly to your Porsche and work perfectly with your OEM calipers. There are two main reasons for replacing your PCCB: first, Girodisc rotors are designed to shed heat more effectively than the original rotors; second, the machined cast iron rotor rings are far more durable than the fragile PCCB rotors. This is critical when you're swapping wheels on-and-off the car for track days or racing. It's so easy to nick a carbon rotor and take a chunk out of it, rendering it useless. Pair these Girodisc rotors with Girodisc A2-156 rear rotors to maintain your factory brake bias and ABS efficiency. When used with Pagid or PFC performance brake pads, and CMS RF1 brake fluid, you have an excellent solution to easily cracked carbon-ceramic rotors. The central hat section of the Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair. 1 Note: you must use the same pad shape as that used on the Porsche 991/992 GT3/Turbo with factory iron rotors. The annulus (pad swept height) of these pads is smaller than that of the large PCCB pads. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

D2-035 Girodisc REAR Replacement Rotor Rings REPLACEMENT ROTOR DISCS ONLY, DOES NOT INCLUDE ALUMINUM HAT. Need new rings for your Girodisc 2pc rotors? We've got them. Rings come complete with all new hardware and full instructions for re-assembly.Price is for a pair of rings and two hardware kits. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

D1-126 GiroDisc Replacement Rotors REPLACEMENT ROTOR DISCS ONLY, DOES NOT INCLUDE ALUMINUM HAT. is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.   The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

D1-153 GiroDisc Replacement Rotors REPLACEMENT ROTOR RINGS ONLY, DOES NOT INCLUDE ALUMINUM HAT. Need new rings for your Girodisc two-piece rotors? We've got them. Rings come complete with brand new hardware and full instructions for re-assembly.Sold and priced per pair Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

D1-156 GiroDisc Replacement Rotors REPLACEMENT ROTOR DISCS ONLY, DOES NOT INCLUDE ALUMINUM HAT. is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.   The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.