C3 Carbon Porsche 991.2 GT2 RS - GT3 RS Front NACA Ducts
C3 Carbon C3 Carbon Porsche 991.2 GT2 RS - GT3 RS Front NACA Ducts from $1,549.99
C3 Carbon Porsche GT2 RS / GT3 RS Front Brake NACA Ducts FITS: 991.2 Porsche GT2 RS and GT3 RS C3 Carbon offers this GT2 RS / GT3 RS 100% carbon fiber front NACA brake duct kit, giving you the uncompromising look, fitment, and finish to match your Porsche's factory carbon perfectly.  You get replacements for the two NACA ducts on the exterior (top) of your front trunk bonnet and two replacements for the interior ducts on the bottom side.  The NACA ducts match the 2x2 carbon weave on your Porsche's factory carbon, finished with either a high-gloss or smooth satin automotive urethane top coat. The interior ducts are matched to the weave and matte finish of the bonnet's underside.  All four pieces are pure dry carbon fiber, no overlays. INCLUDES: Two NACA ducts (top side of bonnet) Two interior ducts (bottom side of bonnet) 3M VHB double-sided trim adhesive FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon Clear-coated with durable automotive urethane OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Porsche 991.2 GT2 RS Wing End Plates
C3 Carbon C3 Carbon Porsche 991.2 GT2 RS Wing End Plates $1,649.99
C3 Carbon Porsche GT2 RS Wing End Plates FITS: 991.2 Porsche GT2 RS C3 Carbon GT2 RS 100% carbon fiber rear-wing end plates offer the uncompromising look, fitment, and finish to match the GT2 RS carbon rear wing perfectly.  C3 uses 3D laser scanning to make an ultra-precise mold CNC-machined into an aluminum billet for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts. The look and finish are simply glorious. These really are the pieces Porsche should have put on the GT2 RS in the first place. The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. Available in high-gloss or matte/satin clear automotive urethane top coat, or satin black top coat. FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing Available in gloss or matte/satin clear, or satin black top coat OEM-perfect fit Installs in minutes without any modification using original hardware Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Installation Instructions Here Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Porsche GT2 RS Style Wing End Plates for GT3 RS
C3 Carbon C3 Carbon Porsche GT2 RS Style Wing End Plates for GT3 RS $1,649.99
GT2 RS Style Wing End Plates for the GT3 RS FITS: 991.1 & 991.2 Porsche GT3 RS C3 Carbon has created a GT2-Style, 100% dry carbon fiber rear-wing end plates that bolt directly to the factory GT3 RS wing! The OEM GT2 RS end plates use a completely different attachment system (adhesive) than the OEM GT3 RS end plates (bolt-on). But we love the look of the GT2 RS wing ends. So we married the two, giving our customers the look of the GT2 RS on their GT3 RS! The C3 Carbon end plates precisely match the uncompromising look, fitment, and finish of the factory Porsche carbon rear wing. They attach in exactly the same way as the OEM GT3RS end plates; no drilling, modifying, etc. required. Just bolt them up and go. C3 starts with 3D laser scanning to make an ultra-precise, CNC-machined aluminum billet mould for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts. The look and finish are truly amazing! The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. Available in either high-gloss or matte/satin automotive urethane clear coat, or satin black automotive coating. FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing Gloss clear, satin clear, or satin black finish available OEM-perfect fit Installs in minutes without any modification using original hardware Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Installation Instructions Here Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
C3 Carbon Porsche GT3 RS Carbon Fiber Rear Wing End Plates
C3 Carbon C3 Carbon Porsche GT3 RS Carbon Fiber Rear Wing End Plates $1,649.99
Carbon Fiber Wing End Plates For Porsche GT3 RS FITS: 991.1 and 991.2 Porsche GT3 RS C3 Carbon 100% carbon fiber rear-wing end plates with the look, fitment, and finish that matches your GT3 RS carbon rear wing perfectly.  C3 uses 3D laser scanning to make an ultra-precise mold CNC-machined into an aluminum billet for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts. There's no modification, drilling, etc. needed -- the C3 Carbon parts are ready to bolt on. The look, however, is pure carbon fiber!  These really are the pieces Porsche should have put on the GT3 RS in the first place. The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. The high-gloss automotive urethane top coat is hand-applied and polished to a smooth mirror finish. FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Easy bolt-on, no modifications required Installs in minutes without any modification using original hardware Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Installation Instructions Here Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.
Sold out
C3 Carbon Porsche 997 Turbo Carbon Fiber Side Intakes
C3 Carbon C3 Carbon Porsche 997 Turbo Carbon Fiber Side Intakes $1,199.99
C3 Carbon Porsche 997 Turbo Carbon Fiber Side Intakes Add visual flair to your 997 Carrera Turbo with beautiful carbon fiber side intake vents from C3 Carbon. Direct replacements for the factory plastic pieces, these spectacularly finished and easy to install carbon fiber intake vents add an aggressive look that reflect the 997 Turbo's deep motorsports heritage. C3's autoclaved, pre-impregnated (pre-preg) dry carbon fiber spoiler is engineered for a perfect fit and is finished flawlessly. C3 matches the OEM Porsche 2x2 3K twill weave for a factory-original appearance. Installation is very straightforward. FITS: 2005-2012 Porsche 997 Carrera Turbo/Turbo S FEATURES: Autoclaved pre-preg dry carbon fiber with 2x2 3K twill weave matched to Porsche factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200o F Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today’s high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you’ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors’ products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn’t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.