Racing Radios

Stilo to IMSA Adapter Cable w/ Driver ID (4C to 5C) Connect your Stilo helmet to your IMSA driver ID radio systems where the car harness has a 5C driver id harness. This special Driver ID cable has a 5th conductor for the officials use to identify the driver in the vehicle. Each cable is custom built and has a special resistor with a four position micro-switch that is decoded to what driver is assigned to the vehicle, #1, #2, #3, #4. Stilo to IMSA Adapter Cable w/ Driver ID (4C to 5C) Details: Manufacturer: Racing Radios Manufacturer part number: RRC-ST50 Helmet end: Stilo 4C Chassis end: IMSA 5C (4C radio communications and 1C driver id) Cord type: Coil How do you change the assigned driver position from 1/2/3/4? Simply unthread the collar of on of the male ends and change the micro-switch to your assigned position. This cable is used in the WeatherTech or Michelin Sportscar Challenge and other series that uses the driver ID system. This is a special cable because it is a 5C (red connector) and different than your standard IMCA connection found in your SCCA/NASA/PCA race car. [img-9634-left-large_default]

Racing Radios (IMSA) MOTOTRBO Car Harness Base Unit (Rear) In-Car Radio Car Harness By Racing Radios for Motorolla MOTOTRBO XPR base unit radios. Having a special 16pin connector that connects to your Motorola MOTOTRBO XPR base unit radio and splits to 4 Conductor (IMSA) for your driver and standard 3 pin PTT connection. This is a special harness compatible only with Motorolla MOTOTRBO XPR series radios. [img-13367-left-large_default] Racing Radios (IMSA) MOTOTRBO Car Harness Base Unit (Rear) Details: Manufacturer: Racing Radios Manufacturer part number: RCH-RCH-XPR-M Helmet connection: IMSA 4 Conductor PTT connection: 3 Pin chrome barrel connector Radio connection: Motorolla 16 pin rear push-in Racing Radios (IMSA) MOTOTRBO Car Harness Base Unit (Rear) Lengths: Black junction box length: 3" Black junction box to 16 Pin connector: 24" Black Juction Box to IMSA Helmet connector: 60" Black junction box to PTT; connector: 84" If you have a Motorola MOTOTRBO XPR Base Unit Radio and connect through the rear 16 pin connector panel, this is your car harness. [img-13367-left-large_default]

Racing Radios Four Conductor (IMSA) Radio Car Harness Kenwood Fitting all Kenwood handheld radios with a two pin connection, this Four Conductor-Style (IMSA) Radio Car Harness By Racing Radios connects your Kenwood radio to your IMSA (4C) helmet and PTT. Fitting all modern Kenwood handheld radios (2 male pins, one larger in diameter and longer, the other smaller in length and diameter) this Racing Radios car harness is ready for years of trouble free communications. This is the IMSA harness that goes from your Kenwood 2 pin handheld (walkie talkie style) to your IMSA (4C) helmet with a push-to-talk connection. Racing Radios Four Conductor (IMSA) Radio Car Harness Kenwood Details: Manufacturer: Racing Radios Manufacturer part number: RCH-KEN Helmet End: IMSA (4 Conductor) Radio End: Kenwood 2 pin Push To Talk Connection: Universal 3 pin [img-2426-left-large_default]

Racing Radios Four Conductor (IMSA) In-Car Universal Harness Universal 4 Conductor (IMSA) wiring radio car harness. Compatible with any handheld two-way radio. Requires proper adapter cable. Also can be used to connect a Vertex VX3200U Base Unit Harness to and IMSA Helmet & Push To Talk

Racing Radios Custom IMSA In-Car Racing Radio Car Harness (Rear)In-Car Radio Car Harness By Racing Radios made to your specific lengths. 4 Conductor (IMSA) style wiring for Motorola mobile radios. Plugs directly into the REAR 16 pin accessory jack on Motorola mobile radios. Compatible with CM200, CM300, PM400, M1225 and CDM mobile radios. If you have a Motorola Base Unit Radio and connect through the rear 16 pin connector panel, this is the car harness you need. You can make custom lengths to fit your vehicle perfectly with no extra wires shoved behind the dash.Racing Radios Custom IMSA In-Car Racing Radio Car Harness (Rear) Details: Manufacturer: Racing Radios Manufacturer part number: RCH-10010-R-SP This is a custom made part and requires 2 days build time

Racing Radios Silver Short Track System This Complete Silver Short Track Radio System By Racing Radios is The System Your Racecar Wants. This is the system that you have been spending all day in front of the computer searching for. Racing Radios has designed the ultimate short-track two-way system. Perfect for short track, go-kart, driver instruction, dirt track and most ovals under 1 mile. This system comes complete with everything you need in the car including the helmet kit, push to talk button, driver earpieces, harness, and complete crew member package. This is same harness, helmet kit, earpieces and etc used by today's top professional teams and drivers. Racing Radios does not substitute its name for quality. That is why they have been and still are The Leader in Racing Communications Worldwide since 1979. Racing Radios Silver Short Track System Details: Radio: Motorola BPR-40 Two-Way Radio x 2 Power: 4 watts Helmet connection: IMSA Car Harness included: Yes Push-To-Talk included: Yes Complete helmet kit including earbuds included: Yes Crew member headset, radio, cable and radio belt included: Yes This is a complete 1 car and 1 crew member system [img-2322-left-large_default]

Racing Radios Three Conductor (NASCAR) Drag Racing Radio Car Harness Drag Racing Harness. 3 Conductor (NASCAR) wiring. Provides louder volume, required to drive helmet speakers. Fits Most Motorola two-pronged style radios like the CP200, BPR40, P1225, PR400 and GP300.

Racing Radios Camera Audio Adapter w/ Audio Input Do you have a camera installed in your car and wish you could get the audio from your radio system synced up with the video? Would you like to listen to a second audio input from a RACEceiver or MP3 device all while maintaining perfect communications with your crew? Well guess what? We at Racing Radios have engineered the perfect solution for you. The RRC-AUX-IO is an adaptor cable that plugs inline with your helmet cable. The adapter has a 3.5MM audio input and it also has another 3.5MM audio output for connecting to a camera. The input jack is perfect for connecting a RACEceiver or other listening device for those required to monitor the series' radio traffic. The audio output jack will connect the driver's microphone audio and the Racing Radios in-car radio's receive audio to the camera system. The audio you'll hear on the video is incredible! Racing Radios Camera Audio Adapter w/ Audio Input Details: Manufacturer: Racing Radios Manufacturer part number: AUX-IO Connector 1 / Helmet Side: IMSA 4C Female Connector 2 / Chassis Side: IMSA 4C Male Audio in: 3.5mm female Audio out: 3.5mm female [img-10006-left-large_default]

Motorola CP200D, CP200, 6 Unit Multi-Charger The Motorola PMLN6588S charges up to 6 Motorola CP series radios from completely empty to full in under 3 hours. Using the advanced design, you may charge a complete handheld Motorola radio or just a single un-installed battery. This is the genuine Motorola "6 gang" charger you see every pro team using. While there are inferior chargers, this genuine Motorola smart charger makes sure your batteries are topped off and not overcharged. Inferior copies use a constant Volt & AMP charge protocol that modern Motorola radios batteries do not like. Motorola batteries are advanced Hi-Capacity Lithium-ion also called Li-ion. Help your genuine Motorola hand held radios have their peak performance and the longest battery life. [img-12143-left-large_default] Motorola CP200D, CP200, 6 Unit Multi-Charger Details: Manufacturer: Motorola Manufacturer part number: PMLN6588A Compatiblility: Motorola CP200D, CP200, PR400, CP200.XLS, and CP150 Series Radios and Batteries Charges: 1-6 radios or bateries at 1 time Charge time: 3 hours Power supply: 110 VAC (standard US outlet) Height: 6-1/64" Length: 17-1/2" Width: 11-1/2" Material: Polycarbonate/Metal [img-12143-left-large_default]

Racing Radios Long Track System - Mobile Radio This system is simply the best. Racing Radios Long Track Mobile Radio system is trusted by more Tudor/ALMS/NASCAR teams than any other. This complete base unit Motorola CM200D system is perfect for longer races because it uses vehicle power. No more rushing to change a battery in a splash and go pit stop. Racing radios is synonymous with quality. This system is simply the best. System includes a custom, in-house built car harness with a steering wheel Push to Talk (PTT) and connection for the helmet kit. Also included is an external antenna kit that will increase the range of reception. A driver helmet kit and ear pieces will complete the car package. For your crew, we have another Motorola CP200 portable and our Racing Radios Classic headset with noise cancelling microphone. This is a complete system and is ready to be shipped out. This is a complete 1 car and 1 crew member system

Motorola XPR 5550E Digital/Analog Two-Way Radio The Motorola XPR 5550E Digital/Analog mobile radio has a special DSP (digital signal processor) and a multi-color screen. In your race car, the DSP offers much clearer communication than other radios, giving your crew and driver a competitive edge iin the heat of battle. The Motorola XPR 5550E is commonly used for driver communication in both the Ferrari Challenge and Lamborghini Super Trofeo racing series. If your race team is using repeaters, then the Motorola XPR 5550E is the perfect choice as one of the easiest two-way digital radios to code. Motorola XPR 5550E Digital/Analog Two-Way Radio Details: Manufacturer: Motorola Manufacturer model number: XPR 5550E Manufacturer part number: AAM28QNN9RA1 N Digital Signal Processor: Yes Digital: Yes Harness connection: Rear Harness: RR-RCH-XPR/M1 Note: 1 The Motorola XPR 5550E uses the Racing Radios RR-RCH-XPR/M harness. It does not accept a standard radio harness.

Racing Radios Peltor Two-Way Headset Racing Radios takes the famous and popular Pro level headset, the Peltor 97042-PEL-6 and adds communication for the highest level of professional racing. Racing Radios Peltor headset line offers customers the same great reliability and functionality as our classic headsets. Racing Radios Peltor Two-Way Headset Details: Manufacturer: Racing Radios Manufacturer part number: RRH-17PEL Behind The Head Fitment -30db Foam Ear Seals Noise Cancelling Microphone Racing Radios Most Popular Pro Headset Designed around the Peltor 97042-PEL-6C hearing protection cup, these two-way headsets have a noise reduction rating of 30db. We ve also outfitted this headset with the Mini flexible driver microphone to allow additional noise cancellation as well as higher quality voice audio while transmitting [img-9996-left-large_default]

Intecom Push To Talk Adapter Cable The Racing Radios IHA-PTT adapter cable is an adapter cable with a 3-pin female connector on each end to adapt any push to talk (PTT) switch to your Racing Radios intercom system, the IHA-PTT is rugged, durable and even better, made in the USA Intecom Push To Talk Adapter Cable Details: Manufacturer: Racing Radios Manufacturer part number: IHA-PTT Length: 24'' End 1: 3 pin female End 2: 3 pin female Intecom Push To Talk Adapter Cable Compatability: All Racing Radios Intercom systems to PTT harness [img-7793-left-large_default]

Racing Radios Three Conductor (NASCAR In-Car Racing Radio Car Harness If You Have a Base Unit Radio and Connect Through the Front Panel, this is your car harness. Racing Radios 4 Conductor (NASCAR) wiring in-car radio harness for Motorola mobile radios. Plugs directly into the FRONT microphone jack on Motorola mobile radios. Compatible with CM200, CM300, PM400, M1225 and CDM mobile radios.

Racing Radios Two-Way Headset Racing Radios Most Popular Behind The Head Headset. Fully Featured with Noise cancelling microphone and full foam ear seals. Built in scanner port on left earcup to plug in existing scanner for 2nd audio feed. Racing Radios Two-Way Headset Details: Manufacturer: Racing Radios Manufacturer part number: RRH-084-BLACK Behind The Head Fitment Foam Ear Seals Noise Cancelling Microphone Racing Radios Most Popular Headset

Racing Radios Three Conductor (NASCAR) In-Car Racing Radio Car Harness (Rear) Racing Radios 3 Conductor (NASCAR) Wiring In-Car Radio Harness for Motorola mobile radios. Plugs directly into the REAR 16 pin accessory jack on Motorola mobile radios. Compatible with CM200, CM300, PM400, M1225 and CDM mobile radios. If you have a Motorola Base Unit Radio and connect through the rear 16 pin connector panel, this is your car harness. This is a custom built piece. Please allow 1-2 additional days before shipping.