Radio Accessories

Racing Radios Helmet Microphone Kit Racing Radios Helmet Large M101 Style Dynamic Noise-Cancelling Flexible Boom Microphone.

Racing Radios 3/C NASCAR Helmet Coil Cord 3-conductor NASCAR coiled cable for your helmet kit. By using a coiled cord, the driver can have greater mobility, even with the tght head containment seats used in modern race cars. The helmet side is 3.5mm and 3C (3 Conductor) and looks similar to an electric guitar or of you are old enough, 8 track headphones. Racing Radios 3/C NASCAR Helmet Coil Cord Details: Manufacturer: Racing Radion Manufacturer part number: RR-HKP-121020 End 1 fitting: 3.5mm 3 conductor End 2 fitting: 4 gold plated terminals (male) [img-2310-left-large_default]

5 Conductor 18" Long Coil Cord 5 Conductor coil cord is used on race car steering wheel remote buttons for PTT (Push To Talk), Drink, Flash to Pass, and many other uses. 5 Conductor 18" Long Coil Cord Details: Manufacturer: Racing Radios Manufacturer part number: G-7965118 Conductors: 5 Length: 18" long relaxed Wire Gauge: 24 The 18" long relaxed length is perfect for giving enough room to remotely hang your steering wheel, but not too long to where it droops below the dash. Usually coiled loosely 2x around the steering column to allow for movement, the 5 conductor 18" long coil cord is rugged and race worthy.

Racing Radios 4/C IMSA Style Helmet Kit (Coil) - EZ Install 4 Conductor IMSA Coil Cord Helmet Kit By Racing Radios is used mostly in sports car racing - IMSA, Grand-Am, SCCA, etc. The coiled cable allows the driver to have some movement with the helmet, adding to the durability of the overall kit. Comes with 3.5mm earpiece connection and top of the line noise canceling microphone. Racing Radios 4/C IMSA Helmet Kit (Coil) - EZ Install Details: Manufacturer: Racing Radios Manufacturer part number: HKP-4C-EZ Coil cord: IMSA Microphone: Mini noise cancelling Instillation kit included: Yes Instructions included: Yes Velcro tab included: Yes The Racing Radios 4/C IMSA EZ Install kit with coil cord is the new gold standard for in-helmet wiring kits. No drilling into the helmet shell, or janky wire connections- the earpiece jack and IMSA connector cord are already connected, and the velcro tab gives you the ability to position the earpiece wherever you like, while providing some extra flexibility in movement without damaging your earbuds. The only piece that needs to be connected is the microphone into the earpiece and IMSA cords.   *Comes with installation instructions and mounting hardware* [img-13722-left-large_default]

Racing Radios Car 10' Antenna Kit - BNC Connector Car Antenna Kit With Whip Antenna And 10 Foot Cable By Racing Radios. BNC on Radio Side, NMO Cable With Metal Shielding, and UHF Whip Antenna on the Other End. This is the normal 1/4 turn chrome connector that goes on the radio. Racing Radios Car Antenna Kit with Whip Antenna and 10 Foot Cable. BNC on Radio Side, NMO Cable With Metal Shielding, and UHF Whip Antenna on the Other End. Racing Radios 10' Antenna Kit Details: Radio End Connector: BNC Quarter Turn Cable Length: 10 Foot Antenna Style: Whip UHF Manufacturer: Racing Radios Manufacturer part number: CAK-40/10 [img-2372-left-large_default]

Racing Radios David Clark Velcro Push To Talk (PTT) Top Of The Line David Clark Push To Talk Switch By Racing Radios.Comes with fail safe backup microswitch. Velcro mount, trusted and dependable David Clark name. Racing Radios David Clark Velcro Push To Talk (PTT) Details: Manufacturer: Racing Radios Manufacturer part number: RR-18216G-04 Steering wheel connection: Velcro Harness connection: 3 Pin industry standard connection [img-2318-left-large_default]

Antenna Kit 1/4 Wave MonoPole Digital Base Unit - Custom Length Our easiest antenna to mount for your Motorola CM200D & CM300D, the CAK-70 antenna kit is a retractable 1/4 wave monopole antenna with built-in flexible wire ground plane. One of the best features is the ability to retract fully (almost flush) or extend the antenna with no tools. This seems trivial unless you have ever broken an antenna mast with a car cover or during maintenance. Antenna Kit 1/4 Wave MonoPole Digital Base Unit - Custom Length Details: Manufacturer: Racing Radios Manufacturer part number: CAK-70-DIGITAL Radio Connector: MINI-U, Mini threaded connector (like most GPS antennas) Cable Length: Choose 6/8/10/12/15 Foot Antenna Style: Retractable 1/4 wave, self grounding This is a special made item and will require a 1-2 day built time. This custom made part is non-returnable.

Racing Radios Car 8' Antenna Kit - Digital Base Unit Motorola CM200D & CM300D Car Antenna Kit with Whip Antenna and 8 Foot Cable. Mini Thread on Radio Side, NMO Cable With Metal Shielding, and UHF Whip Antenna on the Other End. This is used on the modern Digital Base units like the Motorola CM200D & Motorola CM300D. Racing Radios Car 8' Antenna Kit - Digital Base Unit Details: Manufacturer: Racing Radios Manufacturer part number: CAK-MINI/8 Radio Connector: MINI-U, Mini threaded connector (like most GPS antennas) Cable Length: 8 Foot Antenna Style: Whip UHF

Racing Radios Car Antenna Kit - Digital Base Unit Motorola CM200D & CM300D Car Antenna Kit with Whip Antenna and custom length Cable. Mini Thread on Radio Side, NMO Cable With Metal Shielding, and UHF Whip Antenna on the Other End. This is used on the modern Digital Base units like the Motorola CM200D & Motorola CM300D. Racing Radios Car Antenna Kit - Digital Base Unit Details: Manufacturer: Racing Radios Manufacturer part number: CAK-MINI/SP Radio Connector: MINI-U, Mini threaded connector (like most GPS antennas) Cable Length: Choose 6/8/10/12/15 Foot Antenna Style: Whip UHF This is a special made item and will require a 1-2 day built time. This custom made part is non-returnable.

Antenna Kit 1/4 Wave MonoPole BNC Connector - Custom Length Our easiest antenna to mount for your radio system with a BNC antenna adapter, the CAK-70-BNC antenna kit is a retractable 1/4 wave monopole antenna with built-in flexible wire ground plane. One of the beast features is the ability to retract fully (almost flush) or extend the antenna with no tools. This seems trivial unless you have ever broken an antenna mast with a car cover or during maintenance. Antenna Kit 1/4 Wave MonoPole BNC Connector - Custom Length: Manufacturer: Racing Radios Manufacturer part number: CAK-70-BNC Radio Connector: BNC (1/4 turn chrome barrel nut) Cable Length: Choose 6/8/10/12/15 Foot Antenna Style: Retractable 1/4 wave, self grounding This is a special made item and will require a 1-2 day built time. This custom made part is non-returnable.

Helmet Wiring Installation DiscoveryParts will install your supplied radio kit into your racing helmet by simply making a few modifications to the padding. Trouble free communication during those challenging racing weekends is ready for you. Just choose which side you would like your wiring to be on - left side (window net) or right side (shifter) then let us do the rest. And remember, if you purchase your radio kit from DiscoveryParts, there is no charge for this service!

Acoustic Tube In-Ear Surveillance Kit Acoustic Tube In-Ear Surveillance Kit connects to your Motorola hand held radio and allows complete communication (transmit and receive) with one piece. Listening to requests from crew members and driver coaches who want the smallest/simplest/rugged communications piece, the ARSK is the answer. Working from the commercial Motorola Handheld Radios, the harness splits to a mini-snap action push to talk (PTT) and also goes to your earpiece. The single earpiece is a single wire acoustic tube that fits left or right ears. A miniature lapel microphone has a small metal clip for easy positioning. Acoustic Tube In-Ear Surveillance Kit Details Manufacturer part number: RR-SURV KIT Easy and convenient to use. Single wire acoustic tube for left or right ear compatibility. Designed for left or right ear use. Small lapel PTT with inline PTT/ Mic and metal clip. Fits Motorola Commercial Standard Two-Pin Style Radios, CP100, CP150, CP200, CT150, CT250, CT450, CT450LS, GP2000, GP300, GP308, GP68, GP88,GTI, GTX, LTS2000, PR400, P040, P080, P110, P1225, P1225LS, P200,PRO3150, SP10, SP21, SP50, XTN446, XTN500, XTN600, XV1100, XV2100, XU1100, XU2100, XU2600 Fits Motorolla consumer radios: No, these have a different pin spacing Entry level or Pro: Pro Working from the commercial Motorola Handheld Radios, the harness splits to a mini-snap action push to talk (PTT) and also goes to your earpiece. The single earpiece is a single wire acoustic tube that fits left or right ears. A miniature lapel microphone has a small metal clip for easy positioning.  

Motorola Antenna Adapter For BPR40 / CP185 / CP200 Antenna Adapter for Motorola BPR40, CP200 and CP185 Portable Radio To BNC Antenna Adapter. Use this to connect your 1/4 turn BNC antenna to the fully threaded adapter on the back of your Motorola BPR40, CP200 or CP185 Motorola Antenna Adapter For BPR40 / CP185 / CP200 Details Manufacturer: Motorola Manufacturer Part Number: PMDN4041BR Use: Adapt BNC Antenna to Motorola BPR40 / CP185 / CP200 Portable Radios Antenna end: BNC 1/4 turn

Racing Radios Full-Custom Earbuds Designed with Ultra High Noise Transducers, Racing Radios Full-Custom Driver earpieces plug directly into driver helmet with 3.5mm jack. The industry standard full-custom earpiece used by Racing Radios for over 30 years. Send us your custom ear molds from your audiologist and we will make you a complete custom set of earpieces. You get to choose the colors and we take iy from there. Normal time from delivery to us to return to you is 10-14 days. DiscoveryParts Pro Tip: Choose Red as your right and Blue as your left to make night racing install easy (and they will also look cleaner).

Racing Radios 3/C NASCAR Style Helmet Kit (Coil) 3/Conductor NASCAR Coil Cord By Racing Radios Allows the driver to have some movement with the helmet. The kit comes with 3.5mm earpiece connection and top of the line noise canceling microphone. *Comes with installation instructions and mounting hardware*

Racing Radios Car 8' Antenna Kit - BNC Connector Car Antenna Kit With Whip Antenna And 8 Foot Cable By Racing Radios. BNC on Radio Side, NMO Cable With Metal Shielding, and UHF Whip Antenna on the Other End. This is the normal 1/4 turn chrome connector that goes on the radio. Racing Radios 8' Antenna Kit Details: Manufacturer: Racing Radios Manufacturer part number: RR-CAK-40-BNC-8 Radio End Connector: BNC Quarter Turn Cable Length: 8 Foot Antenna Style: Whip UHF [img-2372-left-large_default]