recaro-pro-racer-accessories-steel-sidemount-pair-image
Recaro Recaro Steel Side Mounts (Standard Size) $245.00
Recaro Pro Racer/Profi Steel Side Mounts (Standard Size) This Mount Set Fits the Following Seats Recaro Pro Racer SPA Recaro Pro Racer SPG Recaro Profi SPA Recaro Profi SPG FIA Approved Racing Seat Flexibility These Recaro Steel Sidemount brackets for the P 1300 GT advanced racing shell provide an FIA-approved mounting system for your Recaro Pro Racer or Profi SPA/SPG. Strong, rigid, and made specifically for your Recaro racing seat, this simple side mount system is for drivers who demand the highest quality in their safety gear. This side mount system only works with the Recaro Pro Racer and Profi SPA/SPG standard-size seats. Check out the XL version here. Recaro Steel Side Mount Features One pair of side mounts Steel construction FIA certified For use with the Profi SPA/SPG and Pro Racer SPA/SPG
Sold out
Cobra Nogaro Side Mounts for Porsche 996
Cobra Cobra Nogaro Side Mounts for Porsche 996 $235.00
Cobra Nogaro Side Mounts for Porsche 996 These Cobra side plates allow for trouble free Cobra Nogaro seat installation in a variety of Porsche models. These side plates are designed to be used with OEM manual 996 and 986 Porsche sliders, or the BK R9044 seat track adapter. FEATURES: OEM sliders compared to aftermarket sliders add strength, rigidity, and seat travel. OEM sliders allow for belts to mount above sliders. Stock three-point seatbelt receiver attaches with no addition parts.
CMS Performance Sub Strap Mount for Porsche Carbon Bucket Seat - Discovery Partss
CMS Performance CMS Performance Sub Strap Mount for Porsche Carbon Bucket Seat from $195.00
CMS Performance Sub Strap Mount for Porsche Lightweight Carbon Bucket Seats This Product Fits the Following Cars: 992 GT3/GT3RS 991.1 & 991.2 GT3/GT3RS 991.2 GT2RS 981 Cayman GT4 718 Cayman GT4 718 Cayman GT4RS The Best Way to Install Sub Straps in your Porsche The CMS Performance Sub Strap Mount is a must-have for Porsche GT2RS, GT3/GT3RS, and GT4 owners using five-, six-, or seven-point harnesses with the factory CFRP Full Bucket Seats (also called Light Weight Bucket seats). Designed to easily bolt in using existing seat hardware without having to fully remove the seats from the car, the CMS Performance Sub Strap Mount properly anchors your harness anti-submarine straps ("sub straps") to your seat base. The CMS Performance Sub Strap Mount fits the driver- and/or passenger-side seats. Born In The USA CMS Performance Sub Strap Mounts are designed, manufactured, and powder-coated entirely in-house in the USA. Made of solid carbon steel while only weighing 1.4 lbs (625g), there's not a stronger, more affordable solution available. CMS Sub Strap Mounts allow full seat adjustment, fore/aft and up/down, while maintaining the ideal sub strap angle to your body for maximum safety. CMS Performance Sub Strap Mount Details: Solid steel construction for maximum safety Allows full fore/aft and up/down seat adjustment Powder-coated satin black standard; several Porsche colors available in the drop-down above! Fits driver or passenger seat (Porsche LWB only) Simple to install Compatible with OEM seat belt and airbag hardware
CMS Performance Sub Strap Mount for Porsche 992-991-981-718
CMS Performance CMS Performance Sub Strap Mount for Porsche 992-991-981-718 from $195.00
Sub Strap Mount for Porsche LWB   For cars with Porsche OEM CFRP Full Bucket ("Lightweight Bucket" or "LWB") Seats Only. FITMENT: 992 GT3/GT3RS 991.1 & .2 GT3/GT3RS 992 GT3/GT3RS 991.2 GT2RS 981 Cayman GT4 718 Cayman GT4 The Performance Sub Strap Mount is a must-have for Porsche GT2RS, GT3/GT3RS, and GT4 owners using five-, six-, or seven-point harnesses with the factory CFRP Full Bucket Seats (also called Lighweight Bucket Seats). Designed to easily bolt in using existing seat hardware without having to fully remove the seats from the car, the Performance Sub Strap Mount properly anchors your harness anti-submarine straps ("sub straps") to your seat base. The Performance Sub Strap Mount fits either driver- or passenger-side seats. Performance Sub Strap Mounts are designed, manufactured, and powder-coated entirely in-house in the USA. Made of solid steel while only weighing 1.4 lbs (625g), there's not a stronger, more affordable solution available. The Sub Strap Mounts allow full seat adjustment, fore/aft and up/down, while maintaining the ideal sub strap angle to your body for maximum safety.     FEATURES: Solid steel construction for maximum safety Allows full fore/aft and up/down seat adjustment Powder-coated to match OEM seat base Fits driver or passenger seat (Porsche LWB only) Simple to install Compatible with OEM seat belt and airbag hardware
Sparco Seat Mounting Base: 600 Series
Sparco Sparco Seat Mounting Base: 600 Series $185.00
Sparco 600 Series Seat Mounting Base Refer to the chart below for SKU and fitment Sparco 600 Series seat bases utilize the factory seat mounts on your car or trucks floor to provide a flat surface for mounting your Sparco racing seat. These racing seat bases are vehicle specific for an easy, bolt-in installation. The 600 Series Sparco racing seat bases are constructed with 3/16" thick steel to provide a strong flex-free mount. These racing seat bases are powder coated in a black wrinkle finish for a cleaner look. In addition to the mounting holes provided for standard bolt-on installation, the Sparco base has a wide metal platform to allow custom mounting of side mounts direct to the base (drilling required). This direct installation is an option for race vehicles where the lowest seat position is desired. Please note that these seat mounting bases are available for hundreds of vehicles. As such Discovery Parts cannot stock all makes/models/years and it could take up to 10 business days for your bracket to ship. FEATURES: 3/16" steel construction Wrinkle-finish powder coating Outer set mounting locations allow for wider side-mount racing seats Wide mounting surface allows direct mounting of side mounts (some drilling may be required) PROPER INSTALLATION OF SPARCO RACING SEAT REQUIRES THE FOLLOWING: (1) Seat base (600 series) (1) Side mount bracket set (steel or aluminum) (1) Side mounting hardware kit (50002) (1) Track set seat slider* (00493) *The Track Set allows for forward and backward adjustment of the seat, and is not certified. Check with your sanctioning body before installing. Copy the SKU from the chart below into the "Input Part Number" field above when adding to cart.
Racetech Ram Air Ducting Kit
Racetech Racetech Ram Air Ducting Kit $179.00
Racetech Ram Air Ducting Kit Now you can provide forced air induction to your Racetech 119 or 129 series race seat. Increase driver comfort by removing latent heat to the lower back. Especially useful in longer or enduro race events, this air-cooling maintains a level of comfort for the driver, enabling optimum performance and less heat stress and fatigue. KIT INCLUDES: 12V inline blower motor @122 CFM. Silicone reducer (76mm to 51mm). Four-foot high-temp duct hose. Two tie wraps. For maximum cooling performance, use with NACA duct and 3 intake hose.
Racetech RTB2005C Seat Back Brace Clamps
Racetech Racetech RTB2005C Seat Back Brace Clamps $169.99
Racetech RTB2005C Seat Back Brace Clamps Racetech RTB2005C aluminium clamps for back-mounting seats. Precision cut from a 20mm-thick 5083 alloy sheet. Sold as a pair, these clamps fix around a roll cage tube and bolt to the RTB2115B bracket. This allows you to effectively back-mount a Racetech 119-Series racing seat to the chassis/roll cage at shoulder level. Supplied with two M8 bolts and two flat washers. AVAILABLE SIZES: 11/2 inch (38.1mm) 15/8 inch (41.3mm) 13/4 inch (44.5mm)
Discovery Parts Billet Universal Seat Back Brace
Discovery Parts Discovery Parts Billet Universal Seat Back Brace $169.95
Discovery Parts Billet Universal Seat Back Brace The Discovery Parts Universal Seat Back Brace is approved by SCCA, IMSA, NASA, BMW CCA and other sanctioning bodies. Our aluminum units are designed to bolt to the back of your racing seat and clamp to your roll bar or cage with no welding required DISCOVERY PARTS BILLET SEAT BACK BRACE DETAILS: Manufacturer: Discovery Parts Manufacturer part number: 64080 Fits roll bars: 1-1/2", 1-5/8", and 1-3/4" in diameter Fore-aft adjustment: 2" to 14" Seat plate dimensions: 3" x 9" (27 in2) Made in the U.S.A. Starting with a lightweight billet aluminum clamp, the Discovery Parts Universal Seat Back Brace features a specially-designed radius that fits roll bar tubing from 1-1/2" to 1-3/4" in diameter. This simple and rugged design allows a two-piece clamp design for easy installation in tight fitting areas. To save weight, two windows are machined with a convergent radius to allow maximum strength and the lightest weight possible. We specially designed the inside roll-bar radius for secure mounting. This Discovery Parts brace adjusts from 2" up to 14", making it ideal for multi-driver cars. The plate that bolts to the back of the seat is 3" x 9" for a total of 27 in2. This brace can be used with just about any aluminum or composite seat at any angle. For fore or aft adjustments, just loosen the upper main clamp housing and get a perfect adjustment for your seat in any position. For other adjustments the brace can be loosened so that the seat can be tilted or moved up or down, and the brace then re-tightened. SCCA, NASA, BMW CCA Club Racing, and IMSA require such braces on all non-FIA-rated seats. Please note: the design of this brace requires you to drill holes in the back of your racing seat and attach the bracket to the seat. Drilling holes and attaching a brace to a composite seat may void the seat warranty and/or the FIA-rating. Check with your seat manufacturer and sanctioning body to make sure you're in compliance. Installing this brace to an aluminum seat should not void any warranties and should comply with racing rules. Installation instructions and all mounting hardware are included.
Sparco Side Mount Brackets: HD Aluminum
Sparco Sparco Side Mount Brackets: HD Aluminum $169.00
Sparco HD Aluminum Side Mount Seat Brackets Far and away our most popular side mount seat bracket, the Sparco HD Aluminum seat mounts have multiple side holes that provide a customizable mounting position. The HD Aluminum side mounts have an added benefit of being able to mount in either direction with the legs facing in or out giving you more vehicle mounting options. These HD side mounts are larger than the standard Sparco aluminum side mount. All aluminum construction available in anodized silver only. FEATURES Multiple mounting positions Anodized for superior protection Reverse mount option Weight 3.4 lbs per set
Sparco QRT Side Mount Brackets
Sparco Sparco QRT Side Mount Brackets $150.00
Sparco QRT Side Mount Seat Brackets Sparco QRT side mounts are specifically designed for the QRT-R and other QRT Performance seats. The QRT side mounts are designed for the unique bottom shape of QRT seats. Mutliple side holes allow your QRT seat to be mounted low in the vehicle and with the proper amount of recline or rake. Available in black. TECHNOLOGY Designed for unique QRT bottom shell shape Allows for low mounting in vehicle and proper recline or rake Available in steel or aluminum
Sparco Side Mount Brackets: Aluminum
Sparco Sparco Side Mount Brackets: Aluminum $150.00
Sparco Aluminum Side Mount Seat Brackets Sparco side mounts are used to mount competition seats. Side mounts have multiple side holes that provide a customizable mounting position. FEATURES All aluminum construction Powder coated for superior protection Weight 2.5 lbs per set
Sabelt Aluminum Side Mount Brackets
Sabelt Sabelt Aluminum Side Mount Brackets from $150.00
Aluminum Racing Seat Brackets by Sabelt Laser cut from high-strength aluminum, these lightweight seat brackets are ideal for mounting most side-mount style racing seats. FEATURES: 5mm thick aluminum FIA compliant  Powder coated Black Standard Length: 15.5" long Long Length: 19.25" long    
Recaro Double-Locking Seat Slider 0.70.9
Recaro Recaro Double-Locking Seat Slider 0.70.9 $145.00
Recaro Seat Slider Inside Bar With Tabs DOUBLE LOCKING SLIDER KIT, INSIDE RELEASE, W/ TABS Recaro Locking Sliders are made of high quality materials, offering strength and peace-of-mind when installing a Recaro or other seat in your vehicle. The mechanism is actuated by a steel bar between the two seat rails. This bar is attached directly to the release mechanism, giving you a direct feel on the seat release. It's a much more positive system than traditional mushy cable releases.For use with the Recaro Specialist, Expert, Classic seats. Not for use with Recaro Ergomed, Sportster, or Cross Sportster seats. RECARO SEAT SLIDER FEATURES: Right hand & left hand tracks with 220 mm of fore/aft travel M6x20mm bolts to secure the upper track to the seat frame M8x20 hex head bolts and/or 4 M8x20 Allen bolts to secure the lower track to an adapter/base frame/floor structure Washers for the bolts are included Kit includes inside bar with tabs. Will not fit fixed brackets.  WHAT'S IN THE BOX? (1) Right Hand Track(1) Left Hand Track(6) M6x20mm Bolts(4) M8x20 Allen Head Bolts(6) Washers for M6 Bolts(4) Washers for M8 Bolts
Recaro Double-Locking Seat Slider 0.70.9NT
Recaro Recaro Double-Locking Seat Slider 0.70.9NT $145.00
Recaro Seat Slider No Tabs Inside Bar DOUBLE LOCKING SLIDER KIT, INSIDE RELEASE, NO TABS Recaro Locking Sliders are made of high quality materials, offering strength and peace-of-mind when installing a Recaro or other seat in your vehicle. The mechanism is actuated by a steel bar between the two seat rails. This bar is attached directly to the release mechanism, giving you a direct feel on the seat release. It's a much more positive system than traditional mushy cable releases.For use with the Recaro Specialist, Expert, Classic seats. RECARO SEAT SLIDER FEATURES Right hand & left hand tracks with 220 mm of fore/aft travel M6x20mm bolts to secure the upper track to the seat frame M8x20 hex head bolts and/or 4 M8x20 Allen bolts to secure the lower track to an adapter/base frame/floor structure Washers for the bolts are included Inside release lever WHAT'S IN THE BOX? (1) Right Hand Track(1) Left Hand Track(6) M6x20mm Bolts(4) M8x20 Allen Head Bolts(6) Washers for M6 Bolts(4) Washers for M8 Bolts
Recaro Seat Slider 0.76.3NT
Recaro Recaro Seat Slider 0.76.3NT $145.00
Recaro Seat Slider Outside Bar Without Tabs DOUBLE LOCKING SLIDER KIT, OUTSIDE RELEASE, NO TABS Recaro Locking Sliders are made of high quality materials, offering strength and peace-of-mind when installing a Recaro or other seat in your vehicle. The mechanism is actuated by a steel bar outside of the two seat rails. This bar is attached directly to the release mechanism, giving you a direct feel on the seat release. It's a much more positive system than traditional mushy cable releases. For use with Recaro Ergomed ES. RECARO 0.76.3NT SEAT SLIDER FEATURES Right hand & left hand tracks with 220 mm of fore/aft travel M6x20mm bolts to secure the upper track to the seat frame M8x20 hex head bolts and/or 4 M8x20 Allen bolts to secure the lower track to an adapter/base frame/floor structure Washers for the bolts are included Kit includes outside release bar without tabs WHAT'S IN THE BOX? (1) Right Hand Track(1) Left Hand Track(1) RH Track Cover(1) LH Track Cover(1) Outside release bar(6) M6x20mm Bolts(4) M8x20 Allen Head Bolts(6) Washers for M6 Bolts(4) Washers for M8 Bolts
Recaro Seat Slider 0.76.3
Recaro Recaro Seat Slider 0.76.3 $145.00
Recaro Seat Slider Outside Bar With Tabs DOUBLE LOCKING SLIDER KIT, OUTSIDE RELEASE W/ TABS Recaro Locking Sliders are made of high quality materials, offering strength and peace-of-mind when installing a Recaro or other seat in your vehicle. The mechanism is actuated by a steel bar outside of the two seat rails. This bar is attached directly to the release mechanism, giving you a direct feel on the seat release. It's a much more positive system than traditional mushy cable releases. For use with Recaro Ergomed ES. RECARO 0.76.3 SEAT SLIDER FEATURES Right hand & left hand tracks with 220 mm of fore/aft travel M6x20mm bolts to secure the upper track to the seat frame M8x20 hex head bolts and/or 4 M8x20 Allen bolts to secure the lower track to an adapter/base frame/floor structure Washers for the bolts are included Kit includes outside release bar with tabs WHAT'S IN THE BOX? (1) Right Hand Track(1) Left Hand Track(1) RH Track Cover(1) LH Track Cover(1) Outside release bar(6) M6x20mm Bolts(4) M8x20 Allen Head Bolts(6) Washers for M6 Bolts(4) Washers for M8 Bolts