Sparco Race Seats

Sparco ADV XT Carbon Racing Seat The Sparco ADV XT is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating, FIA 8862-2009. This means the Sparco ADV XT has been tested to an impact of approximately 70G. This rating is required for GT racing, and the Sparco ADV XT was specially designed with a more relaxed, comfortable driving position for GT cockpits. With strength at the top of its class, the Sparco ADV XT can withstand over 6,600 lbs. of lateral force. The Sparco ADV XT has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric, plus a special non-slip fabric in the shoulders and seat area. The Sparco ADV XT is FIA approved when mounted with the Sparco #0049605 side-mount brackets. Sparco ADV XT Carbon Racing Seat Technology Ultra-lightweight carbon fiber construction FIA 8862-2009 approved Testing to an impact of +70G Designed for GT cockpits and driver position HANS device compatible Fire-retardant fabric Special non-slip fabric Sparco ADV XT Carbon Racing Seat Dimensions

Sparco Racing Seats ADV Elite Carbon Seat The Sparco ADV Elite Carbon is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating FIA 8862-2009. This means that the Sparco ADV Elite Carbon seat has been tested to an impact of approximately 70G. This rating is required for WRC racing, and the Sparco ADV Elite Carbon seat was specially designed with an upright driving position preferred by Rally drivers. In addition to the Rally driving position, the outer dimensions have been reduced to fit into typically smaller WRC cockpits. With strength at the top of its class, the Sparco ADV Elite carbon seat can withstand over 6,600 lbs. of lateral force. The Sparco ADV Elite carbon seat has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric and special non-slip fabric in the shoulders and seat area. The Sparco ADV Elite carbon seat is FIA approved when mounted with the Sparco #004988ADV side-mount brackets. Sparco Racing Seats ADV Elite Carbon Technology Ultra-lightweight carbon fiber construction FIA 8862-2009 approved Tested to an impact of +70G Designed for WRC Rally cockpits & driver position Hans device compatible Fire-retardant fabric Special non-slip fabric Sparco Racing Seats ADV Elite Carbon Dimensions

Sparco QRT-C Performance Carbon Fiber Racing Seat The Sparco QRT-C Performance Carbon Racing Seat combines ultra-lightweight carbon fiber construction with premium Italian craftsmanship, creating one of the most exclusive FIA-approved racing seats available. Built on the same race-proven shell as the Sparco QRT-C competition seat, the QRT-C Performance Carbon elevates the driving experience with hand-finished Italian leather, Alcantara upholstery, and exceptional comfort for both track and street applications. Constructed from aerospace-grade pre-preg carbon fiber, commonly referred to as dry carbon, the QRT-C Performance Carbon delivers an extraordinary strength-to-weight ratio while maintaining the support and safety demanded by serious motorsport enthusiasts. Each seat is hand-stitched at Sparco's OEM manufacturing facility in Torino, Italy, ensuring exceptional attention to detail and premium quality throughout. The innovative shell design features a lower seating position that accommodates taller and larger drivers while maintaining compact exterior dimensions for improved fitment in smaller sports car cockpits. Whether installed in a Porsche, Corvette, BMW, Lotus, or dedicated track machine, the QRT-C Performance Carbon delivers race-ready support with luxury-grade refinement. Ultra-Lightweight Dry Carbon Construction The QRT-C Performance Carbon utilizes aerospace-grade pre-preg carbon fiber technology to create an exceptionally strong and lightweight shell. This advanced manufacturing process produces a rigid structure that maximizes driver feedback while minimizing overall vehicle weight. Unlike conventional fiberglass racing seats, the dry carbon construction provides superior stiffness and weight reduction, making the QRT-C Performance Carbon an excellent choice for performance-focused builds where every pound matters. Luxury Meets Motorsport Engineering Premium Italian leather bolsters are paired with Alcantara seating surfaces to create an interior experience worthy of the world's finest performance vehicles. The combination delivers exceptional comfort during long drives while maintaining the grip and support required during aggressive track use. The QRT-C Performance Carbon is equally at home in a high-end street build, track-day car, or endurance racing application where comfort and aesthetics are as important as performance. Sparco QRT-C Performance Carbon Features Aerospace-grade pre-preg dry carbon fiber shell Premium Italian leather and Alcantara upholstery Handcrafted in Torino, Italy FIA 8855-1999 homologated racing seat Lower seating position for taller and larger drivers Compact exterior dimensions for improved cockpit fitment Excellent lateral support and driver containment Designed to accommodate drivers up to approximately a 36-inch waist Harness openings fit a wide range of driver sizes HANS-compatible design Fire-retardant materials High-grip anti-slip inserts for enhanced driver stability Driver Fitment The Sparco QRT-C Performance Carbon is designed to comfortably accommodate medium-to-large drivers and is generally suitable for drivers up to approximately a 36-inch waist. Its optimized shell design provides excellent support while maintaining compatibility with many compact sports car interiors. Technical Specifications Homologation: FIA 8855-1999 Shell Material: Pre-Preg Dry Carbon Fiber Upholstery: Italian Leather and Alcantara Mounting Type: Side Mount Harness Compatibility: Multi-Point Racing Harnesses HANS Compatible: Yes Driver Fitment: Up to approximately 36-inch waist Manufactured In: Italy Why Choose the Sparco QRT-C Performance Carbon? The QRT-C Performance Carbon offers a rare combination of professional motorsport safety, ultra-lightweight carbon fiber construction, and luxury automotive craftsmanship. It delivers the support and protection of a true FIA-approved racing seat while elevating your vehicle's interior with premium Italian materials and hand-built quality. For enthusiasts seeking one of the most advanced and refined carbon fiber racing seats available, the Sparco QRT-C Performance Carbon stands at the top of the category. Sparco QRT-C Performance Carbon Dimensions

Sparco EVO Performance Carbon Fiber Racing Seat The Sparco EVO Performance Carbon Fiber Racing Seat represents the pinnacle of Sparco's legendary EVO seat lineup, combining ultra-lightweight dry carbon fiber construction with premium leather and Alcantara upholstery. Designed for drivers who demand the ultimate blend of motorsport performance, comfort, and luxury, the EVO Performance Carbon delivers race-proven support while looking equally at home in a dedicated track car or a high-end street build. Constructed from aerospace-grade pre-preg carbon fiber, the EVO Performance Carbon is one of the lightest racing seats available. Weighing less than 10 pounds as a bare shell and approximately 12 pounds complete with upholstery and padding, it offers exceptional strength, rigidity, and weight savings for serious performance enthusiasts. Building on the success of the EVO platform, Sparco refined the design with narrower shoulder bolsters for improved fitment in compact vehicles, lower side bolsters for easier ingress and egress, and raised harness openings to better accommodate drivers of varying heights. The result is a competition seat that fits where many other racing seats cannot, making it a popular choice for vehicles such as the Mazda Miata, Porsche Cayman, Toyota GR86, Subaru BRZ, and other compact sports cars. Premium Carbon Fiber Construction The EVO Performance Carbon is manufactured using Sparco's pre-preg dry carbon fiber technology, delivering an exceptional strength-to-weight ratio while maintaining the durability required for motorsport competition. Combined with premium leather bolsters and an Alcantara center section, the EVO Performance Carbon offers a level of refinement rarely found in a true FIA-approved racing seat. Sparco EVO Performance Carbon Features Ultra-lightweight pre-preg dry carbon fiber shell Premium leather and Alcantara upholstery FIA 8855-1999 homologated racing seat Less than 10 lb shell weight Approximately 12 lb complete weight with upholstery Improved fitment for compact vehicle cockpits Narrowed shoulder bolsters for increased clearance Lower side bolsters for easier entry and exit Raised harness guides for improved belt positioning High-grip materials in key support areas Excellent ergonomics and driving position Ideal for track cars, club racing, endurance racing, and premium street builds Why Choose the EVO Performance Carbon? The EVO series features one of the most comfortable seating positions in the Sparco lineup thanks to its optimized seat-back angle and ergonomic design. Combined with the weight savings of dry carbon fiber construction and premium upholstery materials, the EVO Performance Carbon offers exceptional comfort during long track sessions while maintaining the support needed for competitive driving. Its compact external dimensions make it particularly well-suited for smaller sports cars where space is limited but driver support remains critical. Available Sizes EVO Carbon – Medium (up to approximately 34" waist) EVO L Carbon – Large (up to approximately 36" waist) EVO XL Carbon – X-Large (up to approximately 38" waist) Technical Specifications Homologation: FIA 8855-1999 Shell Material: Aerospace-Grade Pre-Preg Carbon Fiber Upholstery: Leather and Alcantara Shell Weight: Less than 10 lb (4.5 kg) Weight with Upholstery: Approximately 12 lb (5.4 kg) Mounting Type: Side Mount Available Sizes: Medium, Large, X-Large EVO Carbon Racing Seat Dimensions EVO L / EVO XL Dimensions ```

Sparco Master 8855-2021 Racing Seat Special Order Item: Estimated lead time 8-10 weeks. Non-cancelable and non-returnable. The Sparco Master 8855-2021 Racing Seat represents the next generation of FIA-approved racing seat technology, combining advanced safety, exceptional comfort, and long-term durability in a professional-grade competition seat. Engineered to meet the latest FIA 8855-2021 homologation standard, the Master is designed for serious racers who demand the highest levels of driver protection and performance. Featuring an ergonomic shell design, adjustable support cushions, and advanced impact-management technology, the Sparco Master delivers outstanding comfort during long race sessions while maintaining the support and containment required for professional motorsport competition. One of the most significant advantages of the Master is its FIA 8855-2021 homologation, which allows for a 10-year service life when installed with the approved Sparco side mounting brackets. This extended homologation period can significantly reduce long-term ownership costs while ensuring compliance with current racing regulations. *Requires Sparco Side Mount Bracket 004919 to qualify for FIA's full 10-year homologation period. Built to the Latest FIA 8855-2021 Standard The FIA 8855-2021 standard is the newest generation of FIA seat homologation, introducing enhanced testing requirements for strength, impact protection, energy absorption, and durability. Compared to previous standards, FIA 8855-2021 seats are engineered to provide improved protection in severe racing incidents while offering a longer homologation period. The Sparco Master was developed to meet these stringent requirements, making it an excellent choice for road racing, endurance racing, GT competition, club racing, and professional motorsport applications. Sparco Master 8855-2021 Features FIA 8855-2021 homologated racing seat Eligible for 10-year FIA homologation period when used with approved Sparco side mounts Professional-grade fiberglass composite shell construction Advanced impact-energy management design Integrated head and shoulder containment system Adjustable side and backrest support cushions Optimized ergonomics for reduced driver fatigue Breathable fire-retardant upholstery materials Excellent lateral support and driver containment Designed for modern professional motorsport applications Why FIA 8855-2021 Matters FIA 8855-2021 is the latest global standard for racing seat safety and durability. Seats certified to this standard undergo extensive testing to evaluate: Impact Resistance: Ability to withstand high-energy crash loads. Structural Strength: Enhanced shell rigidity and load-bearing capacity. Flame Resistance: Compliance with FIA fire-safety requirements. Durability: Long-term performance under racing conditions. Driver Protection: Improved occupant support during impact events. For racers competing under modern FIA regulations, FIA 8855-2021 homologation provides confidence that the seat meets the latest safety requirements recognized throughout international motorsport. Technical Specifications Homologation: FIA 8855-2021 Homologation Duration: Up to 10 years when installed with approved Sparco side mounts Seat Type: Competition Racing Seat Shell Construction: Fiberglass Composite Mounting Type: Side Mount Harness Compatibility: Multi-Point Racing Harnesses HANS Compatible: Yes Upholstery: Fire-Retardant Fabric Why Choose the Sparco Master 8855-2021? The Sparco Master delivers everything serious racers demand: FIA's latest safety certification, exceptional comfort, professional-grade containment, and an extended 10-year homologation period. Whether you're competing in endurance racing, club racing, GT competition, or professional motorsport, the Master provides the protection, durability, and confidence needed to perform at your best. For drivers looking to maximize both safety and long-term value, the Sparco Master stands among the most advanced FIA 8855-2021 racing seats available. Sparco Master 8855-2021 Dimensions ```

Sparco Circuit / Circuit II Carbon Fiber Racing Seat The Sparco Circuit Carbon is the carbon fiber version of the Circuit QRT which is a competition seat designed to provide additional head and neck protection. It is constructed with light weight “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The Circuit Carbon includes integrated bolsters to protect the head from lateral impacts. This seat can be used with an FHR (frontal head restraint) device for even greater protection. The ultra-light shell is features impact-absorbing material surround on the headrest. It has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The Circuit Carbon is FIA 8859-1999 approved. SPARCO CIRCUIT CARBON FIBER RACE SEAT TECHNOLOGY Ultralight pre-preg carbon fiber shell Excellent fitment (for a head restraint seat) into smaller cockpits Excellent ergonomics Fire-retardant fabric Special non-slip fabric FIA 8859-1999 homologated The Sparco Circuit Carbon Fiber is an ultra-light competition seat specifically designed for circuit use. Made from carbon fiber, the Sparco Circuit Carbon Fiber has an ultra-light shell. The Sparco Circuit Carbon Fiber includes integrated bolsters to protect the head. This seat can be used with a Hans device for even greater protection. The ultra-light shell is then wrapped in an impact-absorbing and fire retardant fabric that helps hold the body. The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear. The Sparco Circuit Carbon Fiber is FIA 8855-1999 approved and available in two sizes: Circuit (Standard) and Circuit II (Large). The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear. SPARCO CIRCUIT SIZING Small / Narrow – up to a 32” waist (pants size) SPARCO CIRCUIT II SIZING Medium – up to a 36” waist (pants size)

Sparco ULTRA Carbon Racing Seat The Sparco Ultra Carbon seat is the lightest FIA 8859-1999 seat in the Sparco range at only 8.3lbs. It is constructed with “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon which gives the optimal strength to weight ratio. The Ultra Carbon seat is revolutionary because it was designed to be used without a cover or padding to minimize weight and maximize performance. This allows for a lower seating position and also better feedback from the chassis of your race car. The Sparco Ultra Carbon fiber shell has both form and function. It has an extremely comfortable shape that is contoured for the body with the perfect amount of recline and lumbar support. The Sparco Ultra Carbon race seat was designed to fit into very narrow cockpits but still offer sizing that fits a standard to large size driver. The Sparco Ultra Carbon is FIA 8859-1999 approved. Sparco Ultra Carbon Fiber Race Seat  - Sizing Medium / Large (up to 36” waist) Sparco Ultra Carbon Fiber Race Seat  - Technology Ultralight light weight Pre-Preg Carbon Fiber shellExcellent fitment into small narrow vehicle cockpitsExcellent ergonomicsLower Seating positionFIA 8859-1999 approved Sparco Ultra Carbon Fiber Race Seat - Dimensions

Sparco EVO Carbon Fiber Racing Seats As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo Carbon Fiber. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo Carbon Fiber fits perfectly in a Miata!), the Sparco Evo Carbon Fiber is sure be a mainstay at the track! The EVO Carbon is the all-carbon fiber version of the EVO QRT. It is constructed with pre-preg aerospace grade carbon fiber, also known as dry carbon. The Sparco EVO Carbon is one of the lightest carbon fiber seats on the market. It weighs less than 10lbs (shell only) and 12lbs (with padding and cover). The EVO Carbon is has excellent fitment into smaller cockpits. The EVO series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. It also has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The EVO Carbon is FIA 8859-1999 approved. EVO QRT TECHNOLOGY Ultralight pre-preg carbon fiber shell Excellent fitment into small vehicle cockpits Three shell sizes: Medium, Large, or XL Excellent ergonomics Fire-retardant fabric Special non-slip fabric FIA 8859-1999 approved SPARCO EVO RACE SEAT SIZING The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment: EVO Carbon – Medium (up to 34” waist) EVO L Carbon – Large (up to 36” waist) EVO XL Carbon– X-Large (38” waist) DIMENSIONS

Sparco QRT-K Carbon Kevlar Racing Seat The Sparco QRT-K Carbon Kevlar Racing Seat combines ultra-lightweight construction, advanced composite materials, and race-proven ergonomics to create one of the most impressive competition seats in the Sparco lineup. Constructed from aerospace-grade pre-preg Carbon Kevlar composite, the QRT-K delivers exceptional strength, rigidity, and weight savings while showcasing the distinctive exposed yellow-and-black Carbon Kevlar weave. Based on the proven QRT-R platform, the QRT-K was specifically engineered to accommodate larger drivers without sacrificing cockpit fitment. Its innovative shell design comfortably fits drivers up to approximately a 36-inch waist while maintaining compact exterior dimensions that allow installation in many sports cars and race vehicles where larger seats typically struggle to fit. Weighing just 13.5 lb (6.1 kg) fully trimmed with upholstery, padding, and harness guides, the QRT-K delivers premium motorsport performance with exceptional driver comfort and support. Advanced Carbon Kevlar Construction The QRT-K utilizes aerospace-grade pre-preg Carbon Kevlar composite construction to achieve an outstanding strength-to-weight ratio. Carbon fiber provides exceptional rigidity and weight reduction, while Kevlar contributes excellent impact resistance and durability. The result is a competition seat that delivers outstanding structural performance while showcasing the unmistakable appearance of exposed Carbon Kevlar weave. Designed for Larger Drivers Many lightweight racing seats sacrifice driver comfort in pursuit of reduced weight. The Sparco QRT-K takes a different approach by providing increased interior room for larger drivers while maintaining compact exterior dimensions for improved vehicle compatibility. This unique combination makes the QRT-K an excellent choice for drivers seeking a lightweight FIA-approved seat that doesn't compromise on fitment or comfort. What is Sparco QRT Technology? Developed at Sparco's OEM Composite Laboratory in Italy, QRT (Quick Resin Technology) is an advanced manufacturing process derived from aerospace engineering. QRT technology enables exceptional strength and reduced weight while maintaining the durability required for motorsport competition. The result is a racing seat that delivers outstanding performance and driver feedback while minimizing overall vehicle weight. Sparco QRT-K Carbon Kevlar Features Aerospace-grade pre-preg Carbon Kevlar composite shell Exposed Carbon Kevlar weave finish Fully trimmed weight of approximately 13.5 lb (6.1 kg) FIA 8855-1999 homologated racing seat Designed for larger drivers up to approximately a 36-inch waist Compact exterior dimensions for improved cockpit fitment Excellent ergonomics and long-session comfort Outstanding lateral support and driver containment Fire-retardant upholstery materials High-grip anti-slip fabric in key support areas Compatible with HANS devices and multi-point racing harnesses Ideal for road racing, endurance racing, time attack, and track-day applications Driver Fitment The Sparco QRT-K is designed to comfortably accommodate larger drivers and is generally suitable for drivers up to approximately a 36-inch waist. Its optimized shell geometry provides excellent support while maintaining compatibility with a wide range of sports car and race car interiors. Technical Specifications Homologation: FIA 8855-1999 Shell Material: Pre-Preg Carbon Kevlar Composite Weight: Approximately 13.5 lb (6.1 kg) fully trimmed Driver Fitment: Up to approximately 36-inch waist Mounting Type: Side Mount Required Side Mounts: Sparco QRT Side Mounts (Part Number 600QRT) Harness Compatibility: Multi-Point Racing Harnesses HANS Compatible: Yes Important Installation Information The Sparco QRT-K requires Sparco QRT Side Mount Brackets (Part Number 600QRT) for proper installation. These mounts are specifically engineered for the QRT shell and allow the seat to be positioned at the correct recline angle for optimal comfort and driver control. Why Choose the Sparco QRT-K? The QRT-K offers an exceptional blend of lightweight performance, advanced Carbon Kevlar construction, premium aesthetics, and FIA-approved safety. Its unique ability to fit larger drivers while maintaining compact external dimensions makes it one of the most versatile lightweight racing seats available. For drivers seeking the distinctive appearance of exposed Carbon Kevlar combined with professional-level performance and comfort, the Sparco QRT-K stands among the most desirable competition seats in the market. Sparco QRT-K Carbon Kevlar Dimensions

Sparco QRT-C Carbon Racing Seat The Sparco QRT-C Carbon Racing Seat is the ultimate expression of lightweight racing seat technology. Built around the proven QRT-R platform, the QRT-C utilizes aerospace-grade pre-preg carbon fiber construction to create one of the lightest large-format FIA-approved racing seats available. Designed specifically for larger drivers while maintaining compact exterior dimensions, the QRT-C delivers exceptional comfort, support, and safety without compromising cockpit fitment. Constructed using dry carbon fiber technology, the QRT-C weighs just 12.5 lb (5.7 kg) fully trimmed with upholstery and padding. Its advanced shell design accommodates drivers up to approximately a 36-inch waist while fitting into many vehicles where larger racing seats would normally be too wide. This unique balance of interior room and compact exterior dimensions makes the QRT-C a favorite among drivers building track-focused sports cars, endurance racers, and high-performance competition vehicles. With aggressive lateral support, race-proven ergonomics, and FIA homologation, the QRT-C delivers professional-level performance for serious racers seeking maximum weight savings and driver comfort. Ultra-Lightweight Dry Carbon Construction The QRT-C is manufactured using aerospace-grade pre-preg carbon fiber, often referred to as dry carbon. This advanced construction method produces an exceptionally strong and rigid shell while minimizing weight. The result is a competition seat that offers outstanding structural integrity, precise driver feedback, and reduced overall vehicle weight. For racers focused on every pound of weight reduction, the QRT-C represents one of the lightest FIA-approved large-driver racing seats available today. Designed for Larger Drivers Unlike many lightweight carbon fiber racing seats that prioritize compact dimensions at the expense of driver comfort, the QRT-C was engineered specifically for larger drivers. Its carefully optimized shell geometry provides increased interior room while maintaining compact external dimensions for improved installation flexibility. The QRT-C comfortably accommodates drivers up to approximately a 36-inch waist while fitting many sports car and race car cockpits where traditional large-format seats may not fit. Sparco QRT-C Features Aerospace-grade pre-preg carbon fiber shell construction Fully trimmed weight of approximately 12.5 lb (5.7 kg) FIA 8855-1999 homologated racing seat Designed for larger drivers up to approximately a 36-inch waist Compact exterior dimensions for improved vehicle fitment Outstanding lateral support and driver containment Excellent ergonomics for long racing sessions Fire-retardant upholstery materials High-grip anti-slip fabric in key support areas Compatible with HANS devices and multi-point harnesses Ideal for road racing, endurance racing, time attack, and track-day applications Technical Specifications Homologation: FIA 8855-1999 Shell Material: Pre-Preg Dry Carbon Fiber Weight: Approximately 12.5 lb (5.7 kg) fully trimmed Driver Fitment: Up to approximately 36-inch waist Mounting Type: Side Mount Required Side Mounts: Sparco QRT Side Mounts (Part Number 600QRT) Harness Compatibility: Multi-Point Racing Harnesses HANS Compatible: Yes Important Installation Information The Sparco QRT-C requires Sparco QRT Side Mount Brackets (Part Number 600QRT) for proper installation. These mounts are specifically designed to work with the QRT shell and allow the seat to be positioned at the proper recline angle for optimal comfort and driver control. Why Choose the Sparco QRT-C? The QRT-C delivers an exceptional combination of lightweight performance, premium carbon fiber construction, large-driver accommodation, and FIA-approved safety. Its unique ability to comfortably fit larger drivers while maintaining compact exterior dimensions sets it apart from many competing carbon racing seats. For drivers seeking maximum weight savings without sacrificing comfort, fitment, or safety, the Sparco QRT-C remains one of the most advanced carbon fiber racing seats available. Sparco QRT-C Carbon Racing Seat Dimensions

Sparco QRT Performance Racing Seat The Sparco QRT Performance Racing Seat combines professional motorsport safety with premium Italian craftsmanship, creating one of the most refined FIA-approved racing seats available. Based on the same race-proven shell used in the legendary Sparco QRT-R competition seat, the QRT Performance elevates the driving experience with hand-finished Italian leather, Alcantara upholstery, and exceptional comfort for both track and street applications. Handcrafted at Sparco's OEM manufacturing facility in Torino, Italy, the QRT Performance utilizes Sparco's patented QRT (Quick Resin Technology) shell construction to deliver an exceptional strength-to-weight ratio while maintaining the support and protection expected from a professional-grade racing seat. The innovative shell design features a lower seating position that accommodates taller and larger drivers while maintaining compact exterior dimensions for improved fitment in vehicles with limited cockpit space. Whether you're building a high-performance street car, track-day machine, or dual-purpose sports car, the QRT Performance delivers premium comfort without sacrificing motorsport capability. Luxury Meets Motorsport Performance The QRT Performance is designed for enthusiasts who demand both track-ready functionality and premium interior aesthetics. Luxurious black Italian leather bolsters are paired with Alcantara seating surfaces to provide exceptional comfort, durability, and grip during spirited driving. Its aggressive lateral support helps stabilize the driver during high-speed cornering while remaining comfortable enough for long-distance touring and daily driving. What is Sparco QRT Technology? Developed at Sparco's OEM Composite Laboratory in Italy, QRT (Quick Resin Technology) is an advanced manufacturing process derived from aerospace engineering. QRT technology creates one of the lightest fiberglass composite seat shells available while maintaining exceptional rigidity and strength. Compared to conventional fiberglass manufacturing methods, QRT technology reduces overall shell weight by approximately 30%, delivering performance that approaches carbon fiber construction at a more accessible price point. Sparco QRT Performance Features Patented QRT ultra-lightweight fiberglass composite shell Premium Italian leather and Alcantara upholstery Handcrafted in Torino, Italy FIA 8855-1999 homologated racing seat Lower seating position for taller and larger drivers Compact exterior dimensions for improved cockpit fitment Excellent lateral support and driver containment Harness openings accommodate a wide range of driver sizes HANS-compatible design Fire-retardant materials High-grip non-slip inserts for enhanced driver stability Suitable for track-day, endurance, club racing, and premium street applications Technical Specifications Manufacturer: Sparco Manufacturer Part Number: 008006RNR Homologation: FIA 8855-1999 Shell Material: QRT Fiberglass Composite Upholstery: Black Italian Leather and Black Alcantara Mounting Type: Side Mount Required Side Mounts: Sparco QRT Side Mounts (Part Number 600QRT) Harness Compatibility: Multi-Point Racing Harnesses HANS Compatible: Yes Important Installation Information The Sparco QRT Performance requires Sparco QRT Side Mount Brackets (Part Number 600QRT) for proper installation. These mounts are specifically engineered for the QRT shell design and ensure correct seat positioning and FIA-compliant mounting. Why Choose the Sparco QRT Performance? The QRT Performance offers a unique combination of FIA-approved safety, lightweight racing technology, premium materials, and exceptional comfort. It delivers the support and protection of a professional competition seat while elevating the interior of high-performance street cars and track-focused builds with handcrafted Italian leather and Alcantara upholstery. For drivers seeking a racing seat that performs as well on a cross-country road trip as it does during a track session, the Sparco QRT Performance stands in a class of its own. Sparco QRT Performance Dimensions ```

Sparco EVO QRT Performance Racing Seat The Sparco EVO QRT Performance Racing Seat combines the race-proven design of Sparco's legendary EVO competition seat with premium leather and Alcantara upholstery for an unmatched blend of comfort, support, and style. Designed for drivers who want a seat that looks as impressive on the street as it performs on the track, the EVO QRT Performance delivers professional-level ergonomics and FIA-approved safety in a lightweight package. Featuring Sparco's patented QRT (Quick Resin Technology) manufacturing process, the EVO QRT Performance offers exceptional strength while significantly reducing weight compared to traditional fiberglass racing seats. The result is a competition seat that approaches the weight of a carbon fiber seat while maintaining a more accessible price point. To improve fitment and driver comfort, Sparco refined the EVO platform with narrower shoulder bolsters for easier installation in compact vehicles, lowered side bolsters for improved ingress and egress, and raised harness guides for better belt positioning across a wider range of driver heights. These enhancements make the EVO QRT Performance an excellent choice for vehicles such as the Mazda Miata, Toyota GR86, Subaru BRZ, Porsche Cayman, BMW E36/E46, and other sports cars with limited cockpit space. Premium Comfort Meets Motorsport Performance The EVO series features one of the most comfortable seating positions in the Sparco lineup thanks to its optimized seat-back rake and ergonomic design. Premium leather bolsters combined with Alcantara seating surfaces provide exceptional comfort for street driving, track days, endurance events, and competitive motorsport use. What is Sparco QRT Technology? Developed at Sparco's OEM Composite Laboratory in Italy, QRT (Quick Resin Technology) is an advanced manufacturing process derived from aerospace technologies. QRT significantly improves the strength-to-weight ratio of fiberglass composite seat shells, reducing weight by up to 30% compared to traditional manufacturing methods while maintaining exceptional rigidity and durability. The result is a lightweight racing seat that delivers professional-level performance without the premium cost of a full carbon fiber seat. Sparco EVO QRT Performance Features Patented QRT ultra-lightweight fiberglass composite shell Premium leather and Alcantara upholstery FIA 8855-1999 homologated racing seat Optimized fitment for smaller vehicle cockpits Narrowed shoulder bolsters for increased clearance Lower side bolsters for easier entry and exit Raised harness guides for improved belt positioning High-grip anti-slip materials in key support areas Exceptional driver ergonomics and comfort Ideal for track days, club racing, endurance racing, and high-performance street builds Available Sizes The EVO QRT series is available in four sizes to accommodate a wide range of drivers: EVO S – Small (up to approximately 32" waist) EVO – Medium (up to approximately 34" waist) EVO L – Large (up to approximately 36" waist) EVO XL – Extra Large (up to approximately 38" waist) Technical Specifications Homologation: FIA 8855-1999 Shell Material: QRT Fiberglass Composite Upholstery: Leather and Alcantara Mounting Type: Side Mount Available Sizes: Small, Medium, Large, Extra Large Harness Compatibility: Multi-Point Racing Harnesses Why Choose the Sparco EVO QRT Performance? The EVO QRT Performance combines the comfort and appearance expected from a premium street interior with the support, safety, and lightweight construction required for serious motorsport use. Whether you're building a dedicated track car or a dual-purpose street and track machine, the EVO QRT Performance offers one of the best combinations of comfort, fitment, and performance available today. EVO S Dimensions EVO Standard Dimensions EVO L and EVO XL Dimensions ```

Sparco ULTRA Carbon Racing Seat – FIA 8855-1999 Approved Extreme weight reduction meets uncompromising carbon fiber racing seat technology. The Sparco ULTRA Carbon Racing Seat is engineered for serious motorsport competitors who demand exceptional strength, minimal weight, and a low seating position. Constructed from aerospace-grade pre-preg carbon fiber, this ultra-lightweight fixed-back competition seat combines advanced materials with a purpose-built ergonomic design. Weighing approximately 8.3 lbs (3.8 kg), the Sparco ULTRA Carbon represents one of Sparco's most weight-focused FIA-approved racing seat designs. Its exposed dry carbon construction eliminates traditional upholstery and padding, reducing unnecessary weight while providing a more direct connection between the driver and vehicle. Designed for narrow racing cockpits, the ULTRA Carbon provides an exceptionally compact profile without sacrificing the contoured support needed during demanding competition. Its sculpted monocoque shell, integrated harness openings, and low seating position make it an outstanding choice for lightweight race cars, time attack builds, and competition vehicles where every pound matters. Sparco ULTRA Carbon Racing Seat Features FIA 8855-1999 Homologated: Competition racing seat designed to meet recognized FIA safety requirements. Ultra-Lightweight Construction: Approximately 8.3 lbs (3.8 kg) for exceptional weight savings. Pre-Preg Carbon Fiber Shell: Aerospace-grade dry carbon construction delivers excellent strength with minimal weight. Exposed Carbon Finish: Uncovered carbon fiber shell eliminates conventional fabric upholstery and padding. Low Seating Position: Thin, sculpted shell allows the driver to sit lower in the vehicle. Narrow Cockpit Compatibility: Compact exterior dimensions help accommodate restricted racing interiors. Ergonomic Monocoque Design: Integrated lumbar contouring and carefully engineered recline provide natural driver support. Direct Chassis Feedback: Minimal cushioning allows drivers to experience a more connected seating position. Integrated Harness Openings: Shoulder harness pass-through openings accommodate compatible motorsport harness systems. Side-Mount Installation: Designed for installation using compatible Sparco aluminum side brackets. Premium Racing Appearance: Glossy exposed carbon weave delivers a distinctive professional motorsport finish. Ultra-Lightweight Pre-Preg Carbon Fiber Construction The Sparco ULTRA Carbon Racing Seat uses advanced pre-preg carbon fiber technology to achieve an outstanding strength-to-weight ratio. Unlike conventional composite racing seats, which often rely on thicker shells, padding, and upholstery, the ULTRA Carbon focuses on minimizing material weight while maintaining the structural performance required for competition. Pre-preg carbon fiber construction utilizes reinforcement materials impregnated with a controlled amount of resin. This manufacturing method supports consistent material distribution and efficient structural design. The result is a lightweight carbon fiber monocoque shell that provides an exceptionally direct seating experience without unnecessary layers or bulk. Designed for Narrow Racing Cockpits Many competition vehicles have limited interior space, especially when equipped with roll cages, door bars, center tunnels, and specialized safety equipment. The Sparco ULTRA Carbon addresses these challenges with a compact, low-profile shell that allows installation in tight racing environments. Its streamlined side profile and carefully contoured seating area help maximize available cockpit space while supporting a secure driving position. This makes the ULTRA Carbon especially appealing for lightweight race car builds, track-focused vehicles, and custom motorsport applications where traditional racing seats may be too wide or bulky. Lower Seating Position and Improved Chassis Feedback The ULTRA Carbon eliminates conventional fabric upholstery and thick foam padding to create a seating surface that is both exceptionally lightweight and remarkably direct. By positioning the driver closer to the carbon shell, the seat can help lower the seating position compared with bulkier upholstered alternatives, depending on the mounting configuration. A lower seating position can improve helmet clearance, accommodate drivers within tight roll cage structures, and support more favorable driver positioning in competition vehicles. The rigid carbon construction also provides direct feedback from the vehicle chassis, allowing drivers to feel more connected to the car's movement during acceleration, braking, and cornering. Ergonomic Support Without Traditional Upholstery Despite its minimalist appearance, the Sparco ULTRA Carbon is engineered with driver ergonomics in mind. The one-piece carbon shell incorporates carefully shaped back support, lumbar contouring, and a natural recline angle intended to accommodate the driver's seated position. Its sculpted seating surface supports the body without requiring traditional foam cushions or fabric coverings. Drivers should evaluate the seat's shape and dimensions carefully to ensure a secure fit, particularly when selecting a seat for extended endurance racing sessions. FIA 8855-1999 Racing Seat Homologation The Sparco ULTRA Carbon carries FIA 8855-1999 homologation and is designed for use in motorsport applications requiring an approved fixed-back competition seat. Its lightweight carbon construction and competition-focused design make it suitable for professional and amateur racing applications where the seat complies with the applicable sanctioning body's regulations. Always verify the seat's homologation label, expiration requirements, mounting configuration, and competition eligibility before installation. Sparco ULTRA Carbon Racing Seat Specifications Manufacturer: Sparco Model: ULTRA Carbon Manufacturer Part Number: 008037ZNR Seat Type: Fixed-Back Competition Racing Seat FIA Homologation: FIA 8855-1999 Shell Material: Pre-Preg Carbon Fiber Construction: Lightweight Carbon Fiber Monocoque Weight: Approximately 8.3 lbs (3.8 kg) Finish: Exposed Black Carbon Fiber Upholstery: None – Bare Carbon Shell Size: Single-Size Competition Shell Fitment Guidance: Approximately Medium/Large, up to 36-inch waist depending on driver build Mounting: Side-Mount Configuration Recommended Brackets: Sparco 600W or 600W90 Aluminum Side Mounts Applications: Auto Racing, Time Attack, Club Racing, and Track-Focused Competition Vehicles Sparco ULTRA Carbon Racing Seat Dimensions Proper seat measurements are especially important when installing a fixed-back racing seat in a narrow cockpit or competition vehicle with roll cage clearance restrictions. The dimensions below are based on the supplied product dimension drawing. Front Overall Width: 17.76 inches (451 mm) Rear Overall Width: 17.13 inches (435 mm) Front Mounting Width: 14.72 inches (374 mm) Rear Mounting Width: 13.90 inches (353 mm) Overall Height: 33.46 inches (850 mm) Overall Depth: 29.53 inches (750 mm) Side Mounting Hole Spacing: 11.42 inches (290 mm) Fitment Note: Measure the available cockpit width, roll cage clearance, mounting points, seat height, and driver position before purchasing. Dimensions should be confirmed against the current manufacturer's technical drawing before fabrication or permanent installation. Why Choose the Sparco ULTRA Carbon Racing Seat? The Sparco ULTRA Carbon is designed for racers who prioritize low weight, compact fitment, and direct driver feedback. Its pre-preg carbon fiber construction, minimalist seating surface, and ergonomic monocoque shape distinguish it from conventional fabric-covered racing seats. For competition vehicles where every pound matters, the ULTRA Carbon offers an exceptional combination of advanced materials, purposeful engineering, and professional racing aesthetics. Sparco ULTRA Carbon Racing Seat Frequently Asked Questions How much does the Sparco ULTRA Carbon Racing Seat weigh? The Sparco ULTRA Carbon has a listed weight of approximately 8.3 lbs (3.8 kg), making it an exceptionally lightweight fixed-back competition seat. Is the Sparco ULTRA Carbon FIA approved? Yes. The seat carries FIA 8855-1999 homologation. Verify the seat's homologation label and your racing organization's eligibility requirements before competition. What is the Sparco ULTRA Carbon made from? The seat uses high-strength pre-preg aerospace-grade carbon fiber, commonly referred to as dry carbon, to achieve a high strength-to-weight ratio. Does the Sparco ULTRA Carbon come with padding? The ULTRA Carbon is designed for use without conventional fabric upholstery or foam padding. Its sculpted carbon shell provides the primary seating surface. What size driver fits the Sparco ULTRA Carbon Racing Seat? The seat is offered in a single-size configuration, commonly described as a Medium/Large fit for drivers with approximately a 36-inch waist or smaller. Actual fit depends on hip width, torso dimensions, driving position, and personal preference. Can the Sparco ULTRA Carbon fit into a narrow race car cockpit? Yes. Its compact shell and narrow exterior design make it especially suitable for applications where traditional racing seats may have clearance issues. Always verify dimensions before installation. What mounting brackets are required? Sparco recommends the 600W or 600W90 aluminum side-mount brackets for installation due to the ULTRA Carbon's unique shell geometry. Does the Sparco ULTRA Carbon include seat brackets? Mounting brackets are separate components unless specifically included in a product bundle. Vehicle-specific installation hardware may also be necessary. Can the Sparco ULTRA Carbon improve driving position? Its slim carbon construction and compatible low-position side mounting can allow a lower seating position, depending on the vehicle and installation. Is the Sparco ULTRA Carbon suitable for track days and racing? Yes. The seat is intended for competition motorsport applications, including track-focused builds, time attack, and club racing where the installation and homologation meet event requirements. Shop the Sparco ULTRA Carbon Racing Seat Experience premium carbon fiber seat construction engineered for the demands of serious motorsport competition. With its exceptionally lightweight monocoque shell, FIA 8855-1999 homologation, narrow cockpit fitment, and low seating position, the Sparco ULTRA Carbon delivers the performance-focused design racers expect from Sparco. Upgrade your race car with the Sparco ULTRA Carbon Racing Seat and experience an exceptionally direct, lightweight driving position.  

Sparco ULTRA Racing Seat The Sparco Ultra seat is the lightest FIA 8859-1999 seat in the Sparco range at only 11.4lbs. It is constructed with light weight QRT Technology.  The Sparco Ultra seat is revolutionary because it was designed to be used without a cover or padding to minimize weight and maximize performance. This allows for a lower seating position and also better feedback from the chassis of your race car. The Sparco Ultra shell has both form and function. t has an extremely comfortable shape that is contoured for the body with the perfect amount of recline and lumbar support. The Sparco Ultra race seat was designed to fit into very narrow cockpits but still offer sizing that fits a standard to large size driver. The Sparco Ultra is FIA 8859-1999 approved.  What Is QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies.QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. Sparco Ultra Race Seat Sizing Medium / Large (up to 36” waist) Sparco Ultra Race Seat  - Technology Ultralight light weight QRT Technology shell Excellent fitment into small narrow vehicle cockpits Excellent ergonomicsLower Seating position FIA 8859-1999 approved Dimensions

Sparco Circuit / Circuit II Carbon Fiber Racing Seat 2028 Expiry The Sparco Circuit Carbon is the carbon fiber version of the Circuit QRT which is a competition seat designed to provide additional head and neck protection. It is constructed with light weight “Pre-Preg” aerospace grade carbon fiber, also known as Dry Carbon. The Circuit Carbon includes integrated bolsters to protect the head from lateral impacts. This seat can be used with an FHR (frontal head restraint) device for even greater protection. The ultra-light shell is features impact-absorbing material surround on the headrest. It has high grip material in strategic places such as the shoulder bolsters and seat bottom to aid in lateral support. The Circuit Carbon is FIA 8859-1999 approved. SPARCO CIRCUIT CARBON FIBER RACE SEAT TECHNOLOGY Ultralight Pre-Preg Carbon Fiber shellExcellent fitment (for a head restraint seat) into smaller cockpitsExcellent ergonomicsFire-retardant fabricSpecial non-slip fabricFIA 8859-1999 The Sparco Circuit Carbon Fiber is an ultra-light competition seat specifically designed for circuit use. Made from carbon fiber, the Sparco Circuit Carbon Fiber has an ultra-light shell. The Sparco Circuit Carbon Fiber includes integrated bolsters to protect the head. This seat can be used with a Hans device for even greater protection. The ultra-light shell is then wrapped in an impact-absorbing and fire retardant fabric that helps hold the body.  The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear. The Sparco Circuit Carbon Fiber is FIA approved and available in two sizes: Circuit (Standard) and Circuit II (Large). The integrated head protection is designed to work comfortably and safely with a Hans Device. The slim back offers high lateral support, while an all-new, thin-profile bottom cushion keeps the driver low in the seat without sacrificing comfort. As with all Sparco racing seats, the anti-wear fabric has been added to the seat edges to improve durability and wear. SPARCO CIRCUIT SIZING Small / Narrow – up to a 32” waist (pants size) SPARCO CIRCUIT II SIZING Medium – up to a 36” waist (pants size)