Stilo

Stilo ST5 Helmet Visors Colorful Anti-Fog/Anti-Scratch Shields For Your Stilo Helmet These Stilo visors are a great way to add some color to your racing life! Stilo offers a wide variety of shield options including many popular iridium colors. All Stilo shields have an anti-fog and anti-scratch coating and are made for a perfect fit on your Stilo ST5 helmet (both the GT and N "naked" versions). A Note on Cleaning Anti-Fog/Anti-Scratch Shield Anti-scratch/anti-fog shields require special care in order to preserve the coatings on the inside of the shield. Only use Acrysol Shield Cleaner to clean your shield, inside and out. Do not use glass cleaner containing ammonia (like Windex) as this can harm both the anti-scratch coating on the outside of the visor and the anti-fog coating on the inside. In a pinch, you're better off using water and a clean microfiber cloth to gently clean your Stilo shield.

Stilo ST6 Helmet Shield Visors Colorful Anti-Fog/Anti-Scratch Shields for Your Stilo ST6 (non-ABP) Helmet These Stilo visors are a great way to add some color to your racing life! Stilo offers a wide variety of shield options including many popular iridium colors. All Stilo shields have an anti-fog and anti-scratch coating and are made for a perfect fit on your Stilo ST6 helmet (both the GT and N "naked" versions).

Stilo ST6 FN ABP Helmet Shield Compatible only with Stilo ST6 FN FIA 8860-2018 and FIA 8859-2024 ABP helmets. Stilo offers a wide variety of shield colors and tint options, covering all racing conditions, for the Stilo ST6 FN FIA 8860-2018 ABP and FIA 8859-2024 helmets. These shields are made to fit your Stilo ST6 FN ABP helmet perfectly. Since 2019, the most stringent FIA 8860-2018 ABP (Advanced Ballistic Protection) helmet standard has been in effect for Formula 1. This latest standard builds frontal penetration protection into the helmet shell. The New FIA standard drove Stilo engineers to design and develop the Stilo ST6 FN helmet, along with this new shield design. While looking very similar to the standard Stilo ST6 shield, there is a slight shape difference and overall height difference. Stilo ST6 FN FIA 8860-2018 ABP FIA 8859-2024 Helmet Shield Details: Manufacturer: Stilo Qty in kit: one (1) shield Shield stocking bag included: Yes Fits Stilo ST5 FN FIA8860-2018 ABP and 8859-2024helmets: Yes Fits any other Stilo helmet: No ABP is an Acronym for Advanced Ballistic Protection in the latest FIA F1 standard  

Stilo Anti-Fog/Anti-Scratch Visor for the ST5 Helmet Stilo ST5 visors fit all Stilo SA2020, SA2015, FIA 8859/8860 non-ABP model helmets. Stilo visors are available in over 10 different colors in different levels of gradient to make sure you have the perfect shield for every race condition. From the Stilo dark smoke to a selection of multiple iridiums, Stilo ST5 visors are a great way to ensure your best vision and lap time. Stilo ST5 GT Visor Part Number Chart: STI-YA0800 ST5 Clear Visor STI-YA0801 ST5 Smoked medium visor STI-YA0802 ST5 Smoked dark visor STI-YA0803 ST5 Mirror medium visor STI-YA0804 ST5 Mirror dark visor STI-YA0805 ST5 Iridium blue medium visor STI-YA0806 ST5 Iridium blue dark visor STI-YA0807.2 ST5 Iridium red medium visor STI-YA0808 ST5 Iridium red dark visor STI-YA0809.2 ST5 Iridium yellow medium visor - Not FIA Certified STI-YA0810 ST5 Iridium yellow dark visor - Not FIA Certified STI-YA0813 ST5 Amber visor - Not FIA Certified STI-YA0814 ST5 Clear double glazed visor - Dirt / Offroad Friendly STI-YA0815 ST5 Clear double glazed visor - Not FIA Certified STI-YA0816 ST5 Sun screen short visor STI-YA0821 ST5 Visor sun strip blocker STI-YA0817 ST5 Visor screw kit STI-YA0818 ST5 Visor locking pin replacement STI-YA0851 ST5 Clear Anti-Scratch No Anti-Fog - Dirt / Offroad Friendly High quality, Anti-fog visors shaped for the Stilo ST5 GT helmets. The Stilo ST5 series is unique in that the shield lock is located in the center position of the shield. The shield lock is released by squeezing the outboard sides together and that will then release it from the mount stud that is located in the center of the helmet. The reason for this is to "clean-up" the sides of the helmet where a side impact in a head containment seat may grab parts of the helmet. All Stilo ST5 shilds have the center release mechanism installed on it.All Stilo ST5 shields are treated with an anti-fog treatment and they do require special care. The best result we have by far is the Stilo Visor cleaner. Liberally spray the outside of the visor with the cleaner, and wipe in a single swipe with a micro fiber towel until clean and dry. If fingerprints or dirt remain, repeat as needed. A back and forth wiping motion will tend to leave lint from the rag on the visor, so the single pass works best. Repeat if necessary, but usually one pass works great.Stilo Visor Care: Do not use Windex or any glass cleaner containing ammonia, as this can harm the anti-scratch coating on the outside of the visor, and the anti-fog coating on the inside of the visor. This is the official Stilo Visor Cleaner.

Stilo ST5 Short Sun Visor The Stilo short sun visor fit the Stilo ST5 (all versions composite, carbon, 8860 etc) and is designed to provide extra protection from the sun when a shield isn't necessary. The short visor can easily be adjusted up or down like a full visor for blocking the direct sun's rays. Using your same ST5 hardware that your shield is attached with, this Stilo ST5 short sun visor is a popular item in endurance closed cockpit racers. Not meant to be installed with shield still on the helmet. Sun visor works best as pictured by itself. Stilo ST5 Short Sun Visor Details: Manufacturer: Stilo Manufacturer part number: YA0816 Color: Black Eliminates the full visor for use in internal cockpits Fits the entire range of ST5 helmets Can be adjusted as angle of sunlight drops Sun visor only. Helmet not included.

Stilo Anti-Fog/Anti-Scratch Short Visor for the ST5 Helmet Stilo ST5 short visors fit all Stilo SA2020, SA2015, FIA 8859/8860 non-ABP model helmets. Stilo visors are available in over 4 different colors in different levels of gradient to make sure you have the perfect shield for every race condition. From the Stilo dark smoke to a selection of multiple iridiums, Stilo ST5 visors are a great way to ensure your best vision and lap time. Stilo ST5 GT Visor Part Number Chart: YA0854 ST5 Mirror dark visor YA0836 ST5 Iridium blue dark visor YA0837.2 ST5 Iridium red dark visor YA0838 ST5 Iridium yellow dark visor - Not FIA Certified High quality, Anti-fog visors shaped for the Stilo ST5 GT helmets. The Stilo ST5 series is unique in that the shield lock is located in the center position of the shield. The shield lock is released by squeezing the outboard sides together and that will then release it from the mount stud that is located in the center of the helmet. The reason for this is to "clean-up" the sides of the helmet where a side impact in a head containment seat may grab parts of the helmet. All Stilo ST5 shilds have the center release mechanism installed on it.All Stilo ST5 shields are treated with an anti-fog treatment and they do require special care. The best result we have by far is the Stilo Visor cleaner. Liberally spray the outside of the visor with the cleaner, and wipe in a single swipe with a micro fiber towel until clean and dry. If fingerprints or dirt remain, repeat as needed. A back and forth wiping motion will tend to leave lint from the rag on the visor, so the single pass works best. Repeat if necessary, but usually one pass works great.Stilo Visor Care: Do not use Windex or any glass cleaner containing ammonia, as this can harm the anti-scratch coating on the outside of the visor, and the anti-fog coating on the inside of the visor. This is the official Stilo Visor Cleaner.

Stilo Communications Kits Discovery Parts does not recommend installing these kits without proper training and tools. Call us at (888) 748-7223 and we'll make arrangements for you to send your helmet to us for professional installation and/or retrofitting. PLEASE NOTE:  We will not warranty any Stilo communications kit that has not been professionally installed by our team of experts. Stilo AE0210 Details: Manufacturer: Stilo Manufacturer part number: AE0210 Microphone: Yes, Gentex button shaped microphone that fits in chin bar of all Stilo Helmets Speakers: Yes, mounted in noise reducing padded Stilo Ear Cups Wiring protocol: Female IMSA (4C) The Stilo AE0210 is easily the #1 Stilo electronics wiring kit. Fitting all Stilo GT helmets that have side ports, SA2020, FIA 8859, FIA 8860-2010 and FIA 8860-2018. The round, button microphone is placed into the factory installed hole in the chinbar padding and ear cups are placed into the recesses on each side of the helmet.  Stilo AE0214 Details: Manufacturer: Stilo Manufacturer part number: AE0214 Audio in: Earbud 3.5mm female jack Microphone: Gentex button shaped microphone that fits in chin bar of all Stilo Helmets Who would want the Stilo AE0214? Anyone with a Stilo helmet with custom earbuds that does not want the ear-cups installed. If you find ear cups uncomfortable and use ear buds, then the Stilo AE0214 electronics kit is for you. Audio In: This Stilo EarBud Rally electronics kit uses the Stilo 3.5mm female earbud jack. All audio will be played into your ear buds. Microphone: Your Stilo helmet has a female recess in the front chin bar to place a microphone. The Stilo EarBud Electronics gives you a microphone that fits into the recessed area of your Stilo chin bar.  Stilo AE0320 Details: Manufacturer: Stilo Manufacturer part number: AE0320 Audio in: Earcup and Earbud, both work at the same time Audio out: Gentex flex boom microphone Stilo description: Gen Boom, Speakers, Earbuds 3.5mm What racers prefer the Stilo AE0320? Anyone with an extremely loud race engine. Some formula cars with the engine close to the driver or a ultra high compression race V8. If your car is very loud, or you went to too many Who concerts when you were younger, this is a great communication upgrade.Audio In: This Stilo Dual Rally electronics kit uses the proven Stilo powered ear cup audio electronics for each ear, but also lets you use your earbuds in addition. The audio will be played into both the ear cups and your earbuds at the same time. Microphone: Your Stilo helmet has a female recess in the cheek pad backing and front chin bar to place a noise canceling microphone. The Stilo Dual Rally & Ear Bud Electronics gives you a Gentex noise canceling microphone on a flex boom. You can place the microphone barely touching your upper lip and save your crew chiefs ears. Stilo AE0216 Details: Manufacturer: Stilo Manufacturer part number: AE0216 Microphone: Gentex boom-mounted noise-canceling mic Speakers: Mounted in noise reducing padded Stilo Ear Cups The Stilo AE0216 wiring kit takes the proven ear cups from the AE0210 kit, but replaces the round button microphone with a boom microphone. The boom style microphone allows the driver to place the microphone barely touching their upper lip. This reduces ambient noise transmission through your radio system. This is a great choice for loud cars or anything with a straight cut gearbox. Stilo AE0321 Details: Manufacturer: Stilo Manufacturer part number: AE0321 Wiring protocol: IMSA (4C) Audio in: Earcup Audio out: Gendex flex boom microphone Stilo description: 4 Conductor, Gentex Boom Mic, Earcup Speakers and Earbud 3.5mm Jack Who would want the Stilo AE0321? First you would have a Stilo Formula or Naked Helmet (no side ports), have a race car wired with IMSA communications and want the Stilo noise reduction ear cup communication. Some formula cars with the engine close to the driver or a ultra high compression race V8. If your car is very loud, or you went to too many Who concerts when you were younger, this is a great communication upgrade.Helmet connection: This Stilo cable uses an IMSA (4C) male plug attached to a coil cord to ensure there are no accidental disconnects. Audio In: This Stilo Ear Cup Electronics with Flex Mic and IMSA Coil Cord uses the proven Stilo earcup audio electronics to keep the race car out and the crew member in your ear. There is also a 3.5mm female jack for earbuds. The receiving audio will work through the ear cups or earbuds or both together. This is a proven race worth set-up. Microphone: Your Stilo helmet has a female recess in the front chin bar to to place a noise cancelling microphone, but the 0231 kit uses a Gentex noise cancelling microphone on the end of a flex-boom so you can place the microphone so it is barely touching you upper lip. This is popular in hi-speed formula cars, and extreme environments like Baja 1000, power boats, V8 SuperCars etc. Stilo AE0322 Details: Manufacturer: Stilo Manufacturer part number: AE0322 Wiring protocol: NASCAR (3C) Audio in: Earcup Audio out: Gendex flex boom microphone Stilo description: 3 Conductor, Gentex Boom Mic, Earcup Speakers and Earbud 3.5mm Jack Who would want the Stilo AE0322? First you would have a Stilo Formula or Naked Helmet (no side ports), have a race car wired with NASCAR communications and want the Stilo noise reduction ear cup communication. Some formula cars with the engine close to the driver or a ultra high compression race V8. If your car is very loud, or you went to too many Who concerts when you were younger, this is a great communication upgrade.Helmet connection: This Stilo cable uses a NASCAR (3C) male plug attached to a coil cord to ensure there are no accidental disconnects. Audio In: This Stilo Ear Cup Electronics with Flex Mic and NASCAR Coil Cord uses the proven Stilo earcup audio electronics to keep the race car out and the crew member in your ear. There is also a 3.5mm female jack for earbuds. The receiving audio will work through the ear cups or earbuds or both together. This is a proven race worth set-up. Microphone: Your Stilo helmet has a female recess in the front chin bar to to place a noise canceling microphone, but the 0231 kit uses a Gentex noise canceling microphone on the end of a flex-boom so you can place the microphone so it is barely touching you upper lip. This is popular in hi-speed formula cars, and extreme environments like Baja 1000, power boats, V8 SuperCars etc. Stilo SRO-9217 Kit Details: Manufacturer: Stilo Manufacturer part number: SRO-9217-KIT Helmet Connection 1: Female IMSA connection to connect to the radio harness Helmet Connection 2: Female 3.5mm connection to connect to earbuds Microphone: Gentex noise canceling with flex boom Earpad kit: 2 soft noise transparent earpads If you run in the SRO GT World Series, GT America, GT4 or TC America series, the SRO 2022 rule book removed the legal use of your Stilo earcup communication kit. Our Stilo SRO-9217 kit makes converting your Stilo GT series helmet to the SRO rules fast and easy. We include a genuine Stilo Gentex Boom Mic w/ 3.5mm Earbud Connection and SRO legal ear pad kit. While Stilo earcup communications are still allowed in IMSA, NASCAR, INDYCAR, F4, F3 and many other series, you will need to convert your Stilo GT series helmet to compete while driving in the SRO series. The Stilo SRO-9217 helmet electronic kit replaces your Stilo earcup kit with a Gentex flex boom microphone, 3.5mm earbud connection and soft earpads. Stilo AE0217 Kit Details: Manufacturer: Stilo Manufacturer part number: AE0217 Helmet Connection 1: Female IMSA connection to connect to the radio harness Helmet Connection 2: Female 3.5mm connection to connect to earbuds Microphone: Gentex noise cancelling with flex boom Stilo AE0217 is the helmet electronic kit that uses the female threaded receptacle, a Gentex flex boom microphone, and a 3.5mm earbud connection. If you are using your normal foam or custom earbuds and want a Gentex noise canceling microphone on a flex boom, this is your Stilo helmet wiring kit.

Keep Your Stilo ST5 Helmet Ventilated With The Stilo Top Air System Fresh air keeps you cool and keeps sweat from getting in your eyes as you take the checkered flag. Endurance racers keep their focus high and lap times low by staying in the cool zone. This unique cooling system feeds air from your car's fresh air system to both the top of your head and to the front of your face, while at the same time helping keep the inside of your visor clear. This system integrates into the existing design of the ST5 helmet and does not require any drilling of the shell or modifications to the internal EPS foam. There are four small ventilation holes molded into the top of every ST5 & ST6 helmet. Stilo's Top Air system fits over the forward two holes and extends down the front of the helmet and just under the top of the visor. Air fed into the Top Air is directed both to the top of the head and down over the face. A small deflector just inside the visor area directs air towards the visor and away from the eyes. Old air flows out of the rear holes on the top of the helmet and from the bottom of the helmet, significantly reducing CO2 buildup in the helmet. Stilo's Top Air System can be fitted to all Stilo ST5 or ST6 model helmets.

Stilo Race Gear Bag 2024-The Ultimate Helmet & Gear Hauler Your Race Gear Deserves VIP Treatment You wouldn't trust a budget motel with your race car, so why shove your premium Stilo helmet and gear into a beat-up duffel bag? The Stilo Racegear Bag 2024 is designed to transport your helmet, FHR (frontal head restraint), and essential track-day accessories in total style and security. This bag isn’t just a carrying case—it’s a mobile pit crew for your gear. With input from pro drivers and passionate weekend warriors alike, Stilo engineered this bag to make your track life easier and more organized. Stilo Race Gear Bag Key Features   Spacious, Yet Compact – Perfectly sized to hold your Stilo helmet and HANS/FHR device with room to spare for gloves, visors, and small essentials. Easy-Access Dual Zipper System – Load and unload your gear in seconds with the oversized, smooth-gliding zippers. Front Storage Pocket – Keep your race-day notes, track maps, or even a snack (because let’s be honest, track days get long) within easy reach. Premium Protection – Padded interior to shield your gear from impacts, bumps, and overenthusiastic pit crew members. Sleek, Stilo Styling – Designed with the same attention to detail as their industry-leading helmets—because your gear should look as good as you do on race day. Why Settle for Less? A scratched helmet or a misplaced visor can ruin your entire track day. The Stilo Race Gear Bag 2024 ensures that every piece of your race kit stays protected, organized, and ready for action. Whether you're heading to a casual track day or prepping for competition, this bag is an essential part of your racing arsenal. Stilo Race Gear Bag FAQs Will this bag fit helmets from other brands?Absolutely! While designed with Stilo helmets in mind, most full-face racing helmets will fit snugly inside. Can I store additional items in the bag?Yes! There’s extra space for gloves, visors, and other small gear, plus a front pocket for documents or race-day essentials. Is the bag water-resistant?It offers light water resistance, but we wouldn’t recommend testing it in a downpour. Keep it trackside, not poolside. Does it have a shoulder strap?Nope, but the sturdy carry handle ensures a comfortable grip even when fully loaded. Get Yours Today Stop stuffing your expensive helmet into an old gym bag. Upgrade your race day experience with the Stilo Race Gear Bag 2024 and keep your gear protected, organized, and looking pro. Order now and take the first step towards a smoother, more stylish track day! Stilo Race Gear Bag SKU:  YY0070

Stilo Helmet & HANS Bag  THE BEST WAY TO CARRY YOUR STILO HELMET An extremely high quality helmet bag for your Stilo helmet, the Stilo Helmet Bag features a padded velour interior and a durable, water-repellant Cordura exterior. The heavy duty zippers keep your helmet safe and secure going to and from the track. Helmet bags not only protect your helmet from damage during transport, they also make a helmet much easier to carry. This lets you to carry other gear without the fear of dropping your expensive helmet. This high quality Stilo bag features a durable canvas exterior, a padded velour interior, a detachable shoulder strap for hands-free transport, and ventilation ports on the underside for faster drying. STILO HELMET BAG DETAILS Manufacturer: Stilo Manufacturer part no.: YY0061 Mesh interior pocket for small accessories such as visor hardware. Thick rubber feet to stand bag upright. Two comfortable rubberized non-slip carrying handles. One easily-removable rubberized shoulder strap. Convenient business card window to insert owner's card in case you misplace the bag. Heavy-duty zippers and durable construction for years of hassle free use in racing environments.

Stilo ST6 Helmet Cheek Pads Replacement cheek pads for Stilo ST6 helmets help you customize your helmet to provide the perfect fit! These are only for non-ABP versions of the Stilo ST6 helmet.  If you have a ABP helmet, then please order the version for ABP helmets.  We will not accept returns on these items.

Stilo ST6 ABP Helmet Cheek Pads Replacement cheek pads for Stilo ST6 ABP helmets help you customize your helmet to provide the perfect fit! These are only for ABP versions of the Stilo ST6 helmet.  If you have a non-ABP helmet (most people do), then order the version for non-ABP helmets.  We will not accept returns on these items.

Stilo Cheek Pads Replacement cheek pads for Stilo ST5 / ST5.1 helmets help you customize your helmet to provide the perfect fit!

Stilo Helmet Adapter To Go To NASCAR Radio Systems Genuine Stilo to NASCAR helmet adapter cord to connect the female communication port on your Stilo Helmet to any female NASCAR-style car harness. This is the regular-length Stilo to NASCAR Adapter Cable (4C to 3C) with a 6-inch coiled section. Stilo to NASCAR Adapter Cable (4C to 3C) Details: Manufacturer: Stilo Manufacturer part number: AC0206 Helmet end: Stilo 4C (looks like IMSA, but wired differently) Chassis end: NASCAR 3C Cord type: Semi-coiled

Stilo Helmet Adapter for IMSA Radio Systems Genuine Stilo to IMSA helmet adapter cord to connect the female communication port on your Stilo Helmet to any female IMSA car harness. The short cable has a 4-inch coiled section while the long cable has a 10-inch coiled section. Stilo to IMSA Adapter Cable (4C to 4C) Details: Manufacturer: Stilo Manufacturer part number: AC0212.2 (short) / AC0224.2 (long) Helmet end: Stilo 4C Chassis end: IMSA 4C Cord type: Semi-coiled

Stilo Helmet Aero Kits These aero kits from Stilo provide all the downforce needed for open-cockpit drivers to reduce helmet lift. They are especially popular for IndyCar, Formula Atlantic, and Radical drivers. Choose between rear aero, front IndyCar kit, or both!