
Sparco
Sparco Eagle LT Fire Suit - Limited Edition
$999.00
Sparco Eagle LT Fire Suit (Limited Edition)
The Eagle LT is a limited-edition suit available only for the US market. The Eagle LT features an all-new design in two colorways. This is a limited edition suit, only available for 2021 (while supplies last).
SINGLE LAYER CONSTRUCTION, MULTI-LAYER PROTECTION
The Eagle LT is the result of over 3 years of research and development. Sparco has patented a new technology called HOCOTEX® which revolutionizes the way racing suits are made. This new exclusive Sparco technology creates a single layer fabric which has the protection of what is normally achieved by a multi-layer fabric. The Eagle LT is FIA approved.
UNPRECEDENTED COMFORT
Thanks to HOCOTEX®, the Eagle LT is three times more breathable than a suit produced using traditional technology. The use of this relatively thinner fabric along with large side and back stretch panels and 360 degree arm gussets give the Eagle LT ultimate flexibility and comfort. The Eagle LT uses at new stretch material called Eagle fabric. This Eagle Fabric is lighter, more breathable and abrasion resistant than the traditional stretch material.
IMPROVED FIRE RESISTANCE
Traditional racing suits have layers of fabric sewn together with a quilted pattern. The quilting provides air space between the layers which bloats in a fire, this provides thermal protection to the driver. HOCOTEX® creates a honeycomb structure with internal air cells that ensure the driver even more fire protection. Traditional box quilting creates an average of 300 air chambers in a size 52 suit. The Eagle LT has over 60,000 microcell air chambers which provide a 10 to 12% increase in heat protection performance.
TECHNOLOGY
Single layer construction, multi-layer protection
Three times more breathable than a standard suit
Full 360o arm gussets
Large stretch panels on the sides and back with new breathable fabric
Three years of research and development
HOCOTEX® patented Sparco technology, made in Italy
FIA approved

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sparco
Sparco Victory Fire Suit 8856-2000
$650.00
$899.00
Sparco Victory Fire Suit 8856-2000
This evolution of the Victory auto racing fire suit features an updated, softer HOCOTEX® material. The Victory features an all-new design with four new colorways.
SINGLE LAYER CONSTRUCTION, MULTI-LAYER PROTECTION
The Victory is the result of over three years of research and development. Sparco has patented a new technology called HOCOTEX® which revolutionizes the way racing suits are made. This new exclusive Sparco technology creates a single layer fabric which has the protection of what is normally achieved by a multi-layer fabric.
The Victory is the only single layer suit to pass the SFI 3.2/5 rating. The Victory is both SFI 3.2A/5 and FIA 8856-2000 homologated.
UNPRECEDENTED COMFORT
Thanks to HOCOTEX®, the Victory is twice as breathable as a suit produced using traditional technology. The use of this thinner fabric allows the Victory to have ultimate flexibility, featuring stretch arm gussets that provide more mobility in a seated driving position.
IMPROVED FIRE RESISTANCE
Traditional racing suits have layers of fabric sewn together with a quilted pattern. The quilting provides air space between the layers which bloats in a fire, this provides thermal protection to the driver. HOCOTEX® creates a honeycomb structure with internal air cells that ensure the driver even more fire protection. Traditional box quilting creates an average of 300 air chambers in a size 52 suit. The Victory has over 60,000 microcell air chambers which provide a 10 to 12% increase in heat protection performance.
The Victory is available in boot cuff or standard cuff (size 48 to 66) in five colors: White/Red, White/Blue, Grey/Orange, Grey/Blue, and Black/Grey.
TECHNOLOGY
Soft and lightweight
Twice as breathable as a standard suit
Single layer construction with multi-layer protection
Three years of research and development
HOCOTEX® patented Sparco Technology, made in Italy
Only single-layer SFI 3.2A/5 suit on the market

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Simpson
Simpson Equipment Sterilizer and Dryer
$164.95
$184.00
Simpson Equipment Sterilizer and Dryer
Simpson newest antibacterial multi-equipment dryer circulates air in a temperature controlled environment to safely dry helmets, gloves, and footwear. It hard to put that wet smelly helmet back on your head. What happening to your expensive equipment? The truth is cheek pads and liners degrade over time from perspiration and bacteria. Keep your equipment in peak condition longer by stopping mold and mildew before it starts. You can focus on your driving or riding and quickly refresh between events.
Helmet, gloves, shoes, and all other items represented in the pictures besides the equipment dryer are NOT included with the Simpson Equipment Sterilizer and Dryer and are shown for illustrative purposes only.
FEATURES:
Disinfects & sanitizes
Anti-bacterial to eliminate odors and control bacteria growth
Temperature and timer settings
Simple design easily accommodates multiple styles and sizes
Dual dryer ports
110 volt
A NOTE ON OZONE
Ozone is used widely for sterilizing. The Simpson Equipment Sterilizer and Dryer generates ozone by the corona discharge method.
Ozone is a pale blue gas with a distinctively pungent smell, detectable by many people at concentrations of as little as 0.01 ppm in air. Ozone is formed naturally from diatomic oxygen by electric discharge or exposure to ultraviolet radiation.
Ozone is a powerful oxidant and has many industrial and consumer applications related to oxidation; it is used to deodorize air, purify water, disinfect kitchen tools and treat industrial wastes. This same oxidizing property, however, can cause ozone to damage mucous and respiratory tissues.
Therefore, for safety and comfort purposes, we always recommend using the dryer and sterilizer in a space with adequate ventilation, and stay away from it while it is disinfecting objects with ozone.

OMP
OMP FIRST-S Fire Suit
$599.00
OMP FIRST-S Racing Fire Suit
FIA 8856-2018 HOMOLOGATED
OMP's revised entry-level FIRST-S Racing suit is improved with all-new lightweight fabrics, while still maintaining its popular classic style. Its durable fire-retardant exterior is matched to a soft, knitted inner layer for improved comfort and durability. The high-quality Italian construction uses ultra-flat internal seams to prevent rubbing, and features an elastic knitted lower-back insert for improved comfort and mobility.
Lighter weight than previous versions of OMP's FIRST-S, the new design includes full-floating arms for greater freedom of movement, and modern "fishbone" quilting to match the driver's ergonomics in a seated position.
PROTECTION:
Certified to FIA 8856-2018 homologation standard.
Lightweight and breathable two-layer suit
KEY FEATURES:
Two-layer suit construction
Soft-knitted inner material
Floating arms with elastic bellows
Ultra-flat anti rubbing seams
Classic-fit design.
Weight: 385 g/m2

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sparco
Sparco Competition USA Racing Fire Suit
$595.00
$799.00
Sparco Competition USA Fire Suit
Sparco's Competition line of racing suits continues the Sparco tradition of creating unmatched value in lightweight & breathable suit technology to the masses! Available exclusively in the United States, the 3-layer racing suit shares all of the same great features of the Euro-only Competition+ suit but with an SFI 3.2a/5 rating and an affordable price. Constructed from the latest fire retardant fabrics, the soft and lightweight suit offers the same weight and feel of the X-Light suit from years past. All new Monaco fabric is added to the side panels and under the arms to greatly increase breathability, while stretch panels keep things comfortable. The Competition USA suit is finished with stylized quilting through the torso for improved ergonomics and appearance, as well as a minimalist, lightweight collar, pre-formed sleeves, and adjustable belt. Available in 4 bold colors, the clean and linear styling works to enhance the fit and figure of anyone wearing the suit!. Rated SFI 3.2A/5
TECHNOLOGY
Lightweight and Comfortable 3-layer fabric
Pre-curved arms with elbow stretch panels
Fully floating knit sleeves
Multi-direction back stretch panels creates a full floating upper
Full side stretch panel
Inner thigh stretch panel
SFI approved

OMP
OMP Tecnica Evo Fire Suit
$1,299.00
OMP Tecnica Evo Racing Fire Suit
OMP's latest Tecnica Evo Racing Suit adds updated features to this popular, classically-styled suit. Drawing from OMP's extensive Formula 1 background, the Tecnica Evo is a lightweight, breathable, feature-filled fire suit that doesn't bust the budget. Ultra-flat, anti-rubbing seams are not only comfortable, but help prevent unwanted suit-snagging in tight cockpits. Pre-curved sleeves are attached with a fully-floating epaulette system for freedom of movement, and the "Fishbone" quilting is engineered for optimal ergonomics.
A unique feature of the Tecnica Evo is OMP's AFS (Advanced Fastening System) retractable belt. This semi-elastic belt is partially hidden within the suit, increasing comfort and flattening the suit's profile. The Tecnica Evo's lightweight Nomex material (only 295 gr/sqm) features OMP's Dry System 3D, a highly breathable fabric with excellent fire protection properties. This innovative material makes up flexible inserts strategically placed on the Tecnica Evo for improved comfort on the hottest days.
PROTECTION:
Certified to FIA 8856-2000 and SFI 3.2/a5 homologation standards.
Lightweight and breathable three-layer suit incorporating OMP's new Dry System 3D for excellent breathability and driver comfort.
Nomex¬ outer shell fabric for exceptional heat and flame-resistant proprieties.
KEY FEATURES:
Three-layer suit construction
Shaped collar with soft-knitted inner material
Pre-curved sleeves for maximum comfort
Floating arms with elastic bellows
Dry System 3D material
Ultra-flat anti rubbing seams
AFS (Advance Fastening System) retractable belt
Classic-fit design.
Weight: 320 g/m2

Sparco
Sparco Victory 2.0 Fire Suit FIA 8856-2018
$999.00
Sparco Victory 2.0 Fire Suit FIA 8860-2018
The lightweight and breathable Sparco Victory 2.0 racing suit is feature packed with lightweight HOCOTEX fabric construction, comfort stretch panels, and is dual SFI 3.2/5a and FIA 8856-2018 homologated. Built in Italy with pride, the new lightweight and breathable Sparco Victory 2.0 brings the performance of competitor's suits that have double the cost to weekend racers.
It's hard to improve on a classic, but Sparco has done just that with the updated Victory 2.0 racing suit! Built from the popular Victory racing suit that brought HOCOTEX technology to the needed sub $1000 price point. Largely keeping the popular Victory classic design with modern color options, the new Victory 2.0 suit takes things a step further with an improved cut, style, and fit.
An improved stretch panel on the lower-back further improves mobility, while preformed sleeves maintain excellent steering performance. Sparco's unique HOCOTEX technology makes use of an intricate honeycomb structure that contains thousands of protective microcapsules built into a super-thin and breathable fabric weave. Twice as breathable as other entry-level suits, these insulating compartments replace the multi-layer fabric construction found in every other suit on the market, all while maintaining dual SFI 3.2A/5 & FIA 8856-2018 certifications for zero compromise in protection!
FEATURES:
Soft and Lightweight
Two times more breathable than a standard suit
Single Layer Construction, Multi-Layer Protection
Hidden front pockets
Full-floating, pre-formed sleeves with stretch panels
3 Years of Research and Development
HOCOTEX® Patented Sparco Technology – Made in Italy
Only single layer SFI 3.2A/5 suit on the market
Rating: FIA 8856-2018 & SFI 3.2a/5

Sabelt
Sabelt Hero Superlight TS-10 Fire Suit
$2,195.00
Sabelt Hero Superlight TS-10 Fire Suit
FIA 8856-2018
The Hero TS-10 Superlight from Sabelt is a top-of-the-line professional driver suit constructed with supremely low weight in mind. The outer layer is an extremely light woven flame-resistant material. The fire-retardant Nomex inner layer is soft knit for protection with comfort, while a honeycomb middle layer provides extra insulation without added bulk.
At only 265 g/m2, this lightweight racing suit is one of the best in the industry. The elastic stretch panels around the knees, elbows, and in the lumbar area provide freedom of movement and ventilation. Pre-curved sleeves prevent bunching while driving. The collar is lower than on most other suits for a less restrictive feel. Even the knit wrist and ankle cuffs have been made lighter.
For maximum lightness, this suit features no waist belt. The slim fitting design is simple in order to eliminate as many seams and excess material as possible. The understated stripes are even printed to save every ounce. All colors have black knit wrist and ankle cuffs, black elastic stretch panels, and fire-retardant printed iconic yellow Sabelt logos. Sabelt race suits are manufactured using three layers of Nomex for added safety and protection. They use different weights of Nomex for each model to achieve the best range of performance and value. Sabelt suits are approved for all levels of motorsport. For more specific questions on models and sizing, feel free to contact us at 888-748-7223.
TECHNICAL DETAILS:
Fabric weight 265 g/m¬
Multi-Layer Fire-Proof Nomex Materials
Breathable and Ergonomic Material Incorporated Stretch Panels
Stylish Understated Design
Full Floating Sleeves, Anti-Bunching Pre-Curved Arms
Front Cellphone Pocket, No Waist Belt

Alpinestars
Alpinestars Knoxville v2 Fire Suit
$449.95
Alpinestars Knoxville v2 Fire Suit
The Knoxville v2 Suit suit has a three-layer construction with a strong fire-resistant cotton twill and Feltro padding for optimum levels of driver protection. This suit is also equipped with stretch panels on the crotch, waist and underarm for an enhanced fit, and a twill fire-resistant cotton outer shell and lining for maximum driver comfort. Other key design features include a 3/4 stretchable arm construction, pre-curved arms and legs, stretch panels on the crotch, waist and shoulders for driver comfort and an optimized fit, and a boot cut leg with inner knitted elasticated cuff for maximum protection.
FEATURES
Certified to the SFI 3-2 A/5 standard.
Alpinestars stretch arm construction with aramidic knit fabric ensures minimal material resistance while driving.
Multi-layer assembly suit incorporating knitted stretchable panels for maximum comfort and excellent resistance.
Aramidic knitted stretchable panels on the back, waist and crotch for enhanced comfort and ease of movement.
Ergonomic collar with soft knitted lining for extended coverage and maximum comfort.
100% fire-resistant fabric for high heat and flame-resistant proprieties.
Alpinestars exclusive shoulder epaulette construction provides an effective feature for the extraction of the driver in the event of a crash.
CONSTRUCTION
Ribbed, stretchable wrist and foot cuffs for optimum driver comfort.
Premium metal double slidered zipper personalized for a versatile and customizable fit.
Thigh pockets for convenient, peace-of-mind storage.
Belted waist ensures a precise fit.
Anatomical arm, leg and torso patterned paneling for an optimum fit in the driving position
Comfort fit design.
Weighs 550 g/m2.

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sparco
Sparco Victory Fire Suit 8856-2000 First Generation
$599.00
$899.00
Sparco Victory Fire Suit 8856-2000
SINGLE LAYER CONSTRUCTION. MULTI-LAYER PROTECTION
The Victory RS-7 is the result of over 3 years of research and development. Sparco has patented a new technology called HOCOTEX® which revolutionizes the way racing suits are made. This new exclusive Sparco technology creates a single layer fabric which has the protection of what is normally achieved by a multi-layer fabric. The Victory RS-7 is the only single layer suit to pass the SFI 3.2/5 rating. The Victory RS-7 is both SFI 3.2A/5 and FIA 8856-2000 homologated.
Comfort never felt before: Thanks to HOCOTEX®, the Victory RS-7 is two times more breathable than a suit produced using traditional technology. The use of this relatively thinner fabric allows the Victory RS-7 to have ultimate flexibility. The Victory RS-7 also features 360 degree stretch arm gussets that provide more mobility in a seated driving position.
Improved fire resistance: Traditional racing suits have layers of fabric sewn together with a quilted pattern. The quilting provides air space between the layers which bloats in a fire, this provides thermal protection to the driver. HOCOTEX® creates a honeycomb structure with internal air cells that ensure the driver even more fire protection. Traditional box quilting creates an average of 300 air chambers in a size 52 suit. The Victory RS-7 has over 60,000 microcell air chambers which provide a 10 to 12% increase in heat protection performance.
Soft and Lightweight
Two times more breathable than a standard suit
Single Layer Construction, Multi-Layer Protection
3 Years of Research and Development
HOCOTEX® Patented Sparco Technology – Made in Italy
Only single layer SFI 3.2A/5 suit on the market
Boot Cut Legs
FIA 8856-2000 homolgated
360 Degree Arm Gussets
Internal Pockets and Belt
Boot cut pant legs
TECHNOLOGY
Soft and lightweight
Twice as breathable as a standard suit
Single layer construction with multi-layer protection
Three years of research and development
HOCOTEX® patented Sparco Technology, made in Italy
Only single-layer SFI 3.2A/5 suit on the market

Sparco
Sparco Conquest 2.0 Fire Suit
$425.00
Sparco Conquest 2.0 Fire Suit
The Conquest 2.0 is newest evolution of the Conquest suit. The new Conquest 2.0 features an updated, lighter and softer material. The Conquest 2.0 is one of the best values in terms of budget and performance. This suit was designed for the racer looking for an upgrade from the Jade series suits. Conquest 2.0 features a 2-Layer construction made from 100% Aramidic material for lighter weight and better breathability. The Conquest 2.0 has pre-curved arms for comfort in the driving position. The Conquest 2.0 is SFI and FIA approved.
TECHNOLOGY
Two-layer construction
100% Aramidic for lighter weight and breathability
Pre-curved arms for comfort
FIA and SFI approved
Standard cuff or boot cuff pant legs
HELMET, SHOES, AND GLOVES PICTURED SOLD SEPARATELY
Get the Bell RS7C LTWT Carbon Fiber Helmet here.
Get the Sparco Slalom Suede & Fabric Racing Shoes here.
Get the Sparco Land+ Racing Gloves here.

Sparco
Sparco Prime Fire Suit 2022
$2,100.00
Sparco Prime Fire Suit 2022
The Sparco Prime suit was developed for the McLaren Formula One team and is one of the lightest FIA 8856-2018 approved racing suits in the world. The Prime has unparalleled technological features created in the Sparco R&D laboratories. The project involved optimizing every single detail in terms of material and construction. This includes an ultra slim zipper, soft seamless Nomex/Vicosa wrists and ankle cuffs, the neck and shoulder pads were further reduced, thinner thread was used and stitching flattened. The Prime LT features a 3 layer construction of proprietary Sparco technology. The third outer layer is a double faced mesh made from original DuPont Nomex Comfort woven using Kompact system. The material contains a high percentage of antistatic fibers which provide extremely effective antistatic properties as well as breathability. Prime features pre-curved arms and legs as well as an inner thigh stretch panel for ultimate comfort. The Prime is available in 3 colorways in sizes 48-66. FIA and SFI Approved.
TECHNOLOGY
FIA 8856-2018 and SFI 3.2A/5 Approved
Exclusive DuPont Nomex fibers provide superior fire protection and comfort
Pre-curved Arms and Legs
Lightweight zipper and collar
Inner Thigh Stretch Panel
FIA and SFI approved

00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sparco
Sparco Extrema S Auto Race Fire Suit FIA 8856-2000
$895.00
$1,499.00
Sparco Extrema S Fire Suit
SAVE $$$
The
The Sparco Extrema-S racing suit takes the same patented Hocotex material used in the successful Eagle line and presents in a classically styled suit. Three times as breathable as a traditional layered racing suit, 360 degree floating arm gussets are combined with a stretch back panel for maximum flexibility and comfort. Extra flat seams provide additional comfort, while traditional design touches such as classic Sparco epaulletes and seamless ankle/wrist cuffs make this suit a perfect platform for sponsor logos!How does Hocotex work? Racing suits are traditionally constructed using layers of fabric sewn together with a quilted pattern. This quilting creates pockets of air between the layers which expands in a fire, providing thermal protection for the driver. Hocotex uses a honeycomb structure with over 60,000 internal air cells that provide a 10 to 12% increase in heat protection. Compare this to the 300 quilted chambers found in a traditional suit and the difference is clear!
TECHNOLOGY:
The suit weighs only 290/320 gr per square meter.
Pre-curved Arms and Legs
Strategic Stretch panels
Seamless arm and leg cuffs
Available in white or black
Available in sizes 48-66
FIA 8856-2000 Approved.

Sparco
Sparco Competition Fire Suit 2022
$899.00
Sparco Competition Fire Suit 2022
The Sparco Competition suit is the perfect balance of value and high-end features such as weight and comfort. The Competition is made from the latest generation of synthetic fire-proof fabrics which offer a soft light-weight outer and breathable inserts. The Competition features a unique elastic arm cuff not featured on any race suit. This unique cuff system allows the cuff to easily tuck into the glove gauntlet. The Competition also features pre-curved arms and legs, large rear stretch panel and a breathable inner thigh stretch panel for ultimate comfort.
TECHNOLOGY
FIA 8856-2018 and SFI 3.2A/5 Approved
Unique Arm Cuff System
Pre-curved Arms and Legs
Inner Thigh Stretch Panel

Alpinestars
Alpinestars Atom Fire Suit
$689.95
Alpinestars Atom Fire Suit
The Atom suit has a two-layer construction with a soft knitted liner for optimum levels of protection, and driver comfort. With a twill outershell and aramid lining for comfort and breathability, this suit is also equipped with a fully floating arm construction, pre-curved arms and legs, and stretch panels on crotch, back and waist for an optimized fit.
Note: FIA suits have a standard cuff, SFI suits have a boot cuff
FEATURES
Certified to either the new FIA 8856-2018 homologation standard or SFI 3.2A/5.
Two-layer suit incorporating knitted stretchable panels for maximum comfort and excellent breathability.
Alpinestars fully floating arm construction with stretchable knit fabric ensures minimal material resistance while driving.
CONSTRUCTION
Aramidic knitted stretchable panels on the back, waist and crotch for enhanced comfort and ease of movement.
Ergonomic collar with a soft stretchable insert for extended coverage and maximum driver comfort.
100% aramidic outer shell fabric for exceptional heat and flame-resistant proprieties.
Adjustable belted waist ensures a precise fit.
Anatomical arm, leg and torso patterned paneling for an optimum fit in the driving position.
Alpinestars exclusive shoulder epaulette construction provides for the extraction of the driver in the event of a crash.
Ribbed, stretchable wrists and cuffs for optimum comfort.
Premium YKK double slidered metal zipper for a versatile and customizable fit.
Thigh pockets for convenient, peace-of-mind storage.
Regular fit design.
Weight 420 g/m2