Sabelt
CFRN2002 (8863-2013)
$322.00
Sabelt Right Side Net
The Sabelt right-side driver's net epitomizes top-tier driver safety, securely fastening to the roll cage of your race car. Crafted from polyester, these nets boast superior durability compared to conventional nylon counterparts, as polyester is less susceptible to UV degradation over time.
Considered a vital component of safety gear, we regard right-side nets, also known as "cage nets," as indispensable. In the event of an impact, the body naturally moves forward by 6-8 inches, a crucial mechanism to prevent injury, with the harness providing the necessary stretch to decelerate the body. In lateral impacts, where forces act from the side, a right-side net becomes essential. Without it, the body can easily wrap around the seat when harnesses have stretched, posing a risk of injury. The right-side net prevents this by guiding the head and shoulders back into the seat, averting potential harm.
Key Details:
Triangular assembly.
1” tribar adjusters.
2” front strap with steel adjuster
Ergonomic handle and push button buckle
Sabelt nets undergo rigorous testing with dynamic loads to more accurately simulate real-world scenarios.
Installation instructions emphasize compliance with FIA requirements, including the necessity of two vertical sections in contact with the seat back for support. Schroth enhances its FIA net by incorporating additional vertical sections, distinguishing it from SFI-rated nets.
The FIA recommends installing a net on both sides of the seat for driver restraint, emphasizing the inadequacy of an exterior net alone. The Tudor series enforces this by mandating two interior nets and a window net.
FIA guidelines stipulate that the net must be mounted with horizontal sections of webbing on the inside, creating a smooth surface for the driver's helmet to slide down during impact. Sabelt nets facilitate this by allowing reversal on both sides.
Sabelt's innovative quick-release design complies with FIA requirements, ensuring the button can be released under load. The new-style quick-release replaces the ratchet strap and metal clasp found in previous nets, offering a lighter and safer alternative.
Sabelt
Sabelt 2 Inch Harness Pads
$25.00
Sabelt 2 Inch Harness Pads
Sabelt 2-inch harness pads offer additional padding for your harness shoulder straps, with easy-to-use Velcro closure. Sold in pairs.
Sabelt
Sabelt Aluminum Side Mount Brackets
from $150.00
Aluminum Racing Seat Brackets by Sabelt
Laser cut from high-strength aluminum, these lightweight seat brackets are ideal for mounting most side-mount style racing seats.
FEATURES:
5mm thick aluminum
FIA compliant
Powder coated Black
Standard Length: 15.5" long
Long Length: 19.25" long
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Sabelt
Sabelt Challenge TB-3 Racing Shoes
$149.00
$215.00
Sabelt Challenge TB-3 Racing Shoes
The Sabelt Challenge TB-3 is a mid-cut shoe with a suede exterior and a fire-retardant lining. The embroidered horizontal stripes on the outside of the shoe give the TB-3 and stylish, understated look. The toe areas have no added layers of reinforcement in order to save maximum weight. Sabelt's unique "digit" sole design resembles the ridges in a fingerprint, giving you good all-weather traction without sacrificing pedal feel.
Available in Black with yellow stripes, Black with red stripes, Blue with white stripes, or Red with white stripes. FIA 8856-2000 homologated.
SABELT CHALLENGE TB-3 RACE SHOE FEATURES:
FIA 8856-2000 certified.
Ultra lightweight and comfortable.
Suede construction.
Custom sole for weight reduction and grip.
Sabelt
Sabelt Challenge TS-2 Driver Race Suit
$695.00
Sabelt Challenge TS-2 Driver Race Suit
The Sabelt® Challenge TS-2 race suit is lighter than it’s predecessor at only 360 grams per square meter! This race suit model features a classic racing look and our excellent high quality tailoring. A lower neck collar, pre-curved arms, full-floating sleeves for complete range of motion, and an anti-bubbling twill external layer with pockets are a few of the features you’ll enjoy in this Nomex® fiber woven fire-retardant suit. Hidden shoulder handles under the (also fire retardant) embroidered Sabelt® logo make hanging and storing easier than ever.
Available in sizes EU46–66 / US36-56.
Colors available are black/white, red, white, blue, and black/yellow.
SABELT TS-2 CHALLENGE RACE SUIT TECHNICAL DETAILS
FIA 8856-2018 Homologation
Fabric Weight 360 g/m²
Nomex® Fire-Retardant – Anti-Bubbling External Layer
Lower Neck Collar
Internal Elastic Waist Band, Outer Waist Belt
External Pockets
Sizes EU 46 – 66 (US 36-56)
SABELT TS-2 CHALLENGE RACE SUIT SIZING
Sabelt
Sabelt Custom Superlight TS-10 Driver Race Suit
$3,495.00
Sabelt Custom Superlight TS-10 Driver Race Suit
If you've ever wanted a fully customized race suit tailored to your body and designed specifically for you in every way, Sabelt has the solution for you!
The Sabelt Superlight TS-10 is unquestionably the lightest race suit on the market, weighing in at only 265 g/m² while still meeting the latest FIA 8856-2018 homologation for unsurpassed driver safety. The custom version of this suit can be tailored to your specific needs, including choosing from a wide array of colors. You can select Primary, Secondary and Tertiary colors in addition to selecting thread colors (if desired). You'll have the ability to add custom logos, manufacturer logos, series logos and more.
Whether you drive in IMSA, WEC, Ferrari Challenge, etc., we've made race suits for drivers of all levels campaigning in the these and many other racing series.We already know which series logos need to be placed in what locations for series compliance, guaranteeing your customization options are hassle-free.
Perhaps you don't run in a pro or semi-pro series and you simply want a race suit specifically tailored to fit your body (and to match your livery) perfectly. We can make that happen, too; without the need for series compliance, the door is wide open to have your race suit made whatever ways suit your desires.
Suit production and delivery typically ranges from 3-4 weeks. Once in production, custom suit orders can't be canceled, changed, or refunded.
SABELT TS-10 RACE SUIT OPTIONS INCLUDE:
Name on race suit
Country flag on race suit
Belt on race suit
Fit (slim or regular)
Cooling shirt tube pass-through (none, left, or right)
Bootcut or standard cuff
Pockets (none, normal, and/or cellphone)
Logos printed or embroidered
STANDARD SUPERLIGHT TS-10 RACE SUIT FEATURES:
FIA8856-2018 approved
Fabric weight 265 g/m²
Full floating sleeves
Large stretch panel in lumbar and hips
Driver cooling tube pass-through on left hip
Cellphone pocket on front right thigh
Pre-curved arms
IMPORTANT PRICING & ORDERING NOTES:
The standard price includes basic customization, colors and patterns. Once you place your order, a custom suit specialist from Discovery Parts will reach out to you to ensure your specific needs are met. You'll be sent a measurement chart and we'll confirm color options, series compliance, logos, and other details.
You will be able to submit photos of your livery, examples of suits similar to what you want, and anything else that will help us create the artwork for your custom suit. A proof will be sent to you for revisions and/or approval, typically within two to three business days. Once design, colors, sizing, etc. is approved, the final cost of your custom suit will be sent to you in a supplemental invoice. (Factors affecting cost include number of logos, complexity of design, custom colors, etc.)
Sabelt
Sabelt Door Pulls
$25.00
Sabelt Door Pulls
This quality door pull strap mounts to a 9.5mm bolt hole. Made from plyable webbing, 220mm (7") long and 25mm (1") wide. We have found that these can also function well as grab handle or as a keychain.
Available in black only.
Sabelt
Sabelt Enduro Gold 6 Point Racing Harness
$1,195.00
Sabelt Enduro Gold 6 Point Racing Harness
Get ready to dominate the track with the Sabelt Enduro Gold 6 Point Racing Harness, a racing harness that’s all about enhancing your performance while ensuring unparalleled safety. Designed meticulously for the adrenaline-seeking racer, this harness is your ultimate co-pilot on the track.
SCHROTH ENDURO GOLD 6 POINT RACING HARNESS FEATURES
Robust 2" Shoulder Straps: Embrace the comfort and security of full-width shoulder straps, designed to keep you locked in even during the wildest rides and sharpest corners.
Innovative Snap Hook with Tri-Bar Adjuster: Customize your fit in seconds with Sabelt's easy-to-use adjusters, crafted to maximize your time on the track, not in the pits.
Specialized 2” Lap Belts: These aren’t your standard lap belts. With carabiner fixing and an adjuster designed specifically for 2” webbing integrated directly into the buckle tongue, these belts are built for the rigors of GT and endurance racing.
Quick-Release Camlock System: Sabelt's camlock system is a game changer, offering a streamlined design that makes fastening a breeze and includes a quick release with spring ejectors for rapid exits in emergency situations.
Secure Crotch Straps and Eye-Catching Yellow Pull Loops: Feel the extra security of full 2” crotch straps with the convenience and safety of bright yellow pull loops that not only look great but are easy to find in an emergency.
Added Comfort Features: Velcro on the shoulder straps allows for easy adjustments and securing wiring like an intercom cords, keeping your set-up sleek and functional.
EXPERIENCE THE ENDURO GOLD DIFFERENCE
Imagine being strapped into the Sabelt Enduro Gold 6 Point Racing Harness, feeling the grip of the webbing as you corner at high speed, the secure fit giving you the confidence to push your limits. The tactile feedback from every part of this harness tells you that it’s built for speed, safety, and very high performance. Whether in a sprint race or an endurance challenge, this Sabelt Enduro Gold keeps you securely in place, letting you focus on driving.
SABELT ENDURO GOLD 6-POINT RACING HARNESS DETAILS
Manufacturer: Sabelt
Manufacturer part no.: CFCIxx170068
Homologation: FIA 8853-2016
Attachment points: Six1
Shoulder straps: 2’’ width, quick release adjuster
Shoulder strap fixing: Snap hook w/ tri-bar adjuster
Lap belts: 2’’ width, carabiner fixing
Crotch belts: 2’’ width, snap hook w/tri-bar adjuster
Camlock: quick release with spring ejectors
1 Attachment of the shoulder belts requires the use of a roll bar or harness bar, and the sub straps must be mounted to a properly-designed sub strap bar beneath the seat.
Sabelt
Sabelt Enduro Silver Series 6 Point Racing Harness
$579.00
Sabelt Enduro Silver Series 6 Point Racing Harness
INCLUDES BOTH PULL-UP AND PULL-DOWN LAP BELTS FOR ULTIMATE FLEXIBILITY
The new Sabelt Enduro Silver Series 6-Point Racing Harness uses 2″ belts throughout, secured by lightweight aluminum hardware. This professional-level harness is easily adjusted in the cockpit using bright yellow tabs on the shoulder belts that pull down, along with interchangeable lap belts that feature either pull-up or pull-down tabs. These make driver changes and cockpit ingress/egress easier than ever. The newly-designed camlock integrates the sub belts into the buckle, increasing driver safety in the event of an impact.
FEATURES THAT RACE DRIVERS LOVE
A number of other handy features have been added, including communication and hydration routing on top of the shoulder straps and silicone grip on the underside to keep your head-and-neck restraint device securely in place while on the track.
Sabelt is an industry-leading manufacturer of motorsport harnesses and accessories, and the Enduro Silver Series is an extremely popular racing harness for good reason.
SABELT ENDURO SILVER SERIES 6 POINT HARNESS DETAILS
Manufacturer: Sabelt
Manufacturer part no.: CFCIxxx0056
FIA 8853-2016 homologated
New compact camlock buckle is fully integrated with the sub-belts
Easily adjusted using yellow pull-down shoulder straps
Interchangeable pull-up and pull-down lap belts included
Velcro patches on shoulder straps for securing loose ends
Communication/hydration routing on shoulder belts
Sabelt
Sabelt Enduro Silver Series Porsche GT2/GT3/GT4 6 Point Racing Harness
$599.00
Sabelt Enduro Silver Series Porsche GT2/GT3/GT4 Racing Harness
Built specifically for the Porsche GT2, GT3, and GT4, this six-point Sabelt Enduro Silver Series racing harness provides all the safety and security you've come to expect from Sabelt in a package that makes installation in your Porsche extremely fast and easy. The Sabelt Silver Series harness is easily adjusted using bright yellow tabs that pull down, making securing and releasing your harness simpler than ever.
NEW FULLY INTEGRATED CAM LOCK
The newly designed cam lock buckle now integrates the sub belts into the fixture, greatly increasing driver safety in the event of an impact. A number of other handy features have been added, including Velcro communication/hydration routing on top of shoulder straps and silicone grip on the underside to keep your head-and-neck restraint device securely in place while on the track.
Sabelt is an industry-leading manufacturer of motorsport harnesses and safety accessories, and their Silver Series Enduro Porsche racing harnesses stand out for good reason.
SABELT SILVER SERIES ENDURO PORSCHE RACING HARNESS DETAILS
Manufacturer: Sabelt
Manufacturer part no.: CFCIxxx00024
FIA 8853-2016 homologation
Available in black, blue, or red webbing
New camlock buckle fully integrated with the sub belts
Bright yellow pull-down straps for easy adjustment
Velcro on shoulder straps secures loose ends
Communication/hydration routing on shoulder belts
Sabelt
Sabelt F12 8855-2021 Side Mount Brackets
$309.00
Sabelt F12 8855-2021 Side Mount Brackets
Laser cut from high-strength aluminum, these lightweight seat brackets are ideal for mounting most side-mount style racing seats.
FEATURES:
FIA 8855-2021 Homologated
Includes mounting bolts
Sabelt
Sabelt GT-635 Ferrari Challenge Racing Seat
from $9,595.00
Sabelt GT-635 Carbon Fiber Racing Seat for Ferrari Challange
Through the years, the Sabelt GT-635 racing seat design is known as the OEM fitment for Ferrari Challenge race cars. The latest Sabelt GT-635 racing seat was developed in partnership with the fastest teams in both Ferrari Challenge series and GT Championships.
The result is a racing seat that's both light weight and incredibly comfortable. Offered in Medium, Large or XL to accommodate a wide range of drivers, the GT-635 is beautifully constructed and upholstered to offer excellent support and breathability.
The GT-635 carbon seats flat bottom and specific back inclination design provides proper fitting suitable for either circuit and rally cars. The shell has undergone extensive studies and trials to be the most ergonomically optimal position for the driver. The DCT halo offers invaluable head protection. The double shoulder harness slots improve the fitting of different drivers torso heights.
The carbon fiber shell is available in two sizes: M (small shell,) and L/XL (big shell.) The fire retardant anti-slip fabric with improved grip on specific key areas also features improved comfort thanks to 3D breathable mesh materials and high density foam. The GT-635 is available for use with FIA certified sliders (circuit only) or fixed brackets (GT/rally/circuit). Be sure to select the correct model from the drop down menu for your specific application. The sliders and brackets are sold separately.
FIA 8862-2009 certified.
Sabelt
Sabelt GT-Pad Racing Seat
$1,179.00
Sabelt GT-Pad Racing Seat
The Sabelt GT-Pad racing seat is Sabelt’s first modular seat, offering drivers the most customization available outside of a custom-built racing seat. The lightweight shell is covered with a velour fabric that is highly resistant to wear, looks great and is extremely comfortable even for extended stints when endurance racing.Sabelt GT-PAD is the new modular FIA approved racing seat to fit different sized drivers into the same easy to configure race seat. Endurance racers now have the capacity to quickly modify the seat shell to perfectly fit different sized drivers of their team. Are you not a typical cookie cutter body shape racer? Use the available different pad kits to make the Sabelt GT-PAD hold you in like no other seat. Additional seat pad kits (Medium, Large, and XL) are available in either red or black, making it possible to customize the seat to both your fitment needs and your design taste by utilizing different colored and/or sized pads. The Sabelt GT-Pad is a truly ground-breaking seat design bringing everyone the fit, finish, and comfort previously available only with custom-made racing seats.
SABELT GT PAD RACING SEAT FEATURES
FIA 8855-1999 homologation.
Medium weighs 23.5 lbs.
Large weighs 23.3 lbs.
XL weighs 23.1 lbs.
Developed using Sabelt's experience participating in the world’s leading racing series.
Integrated head protection system.
Shoulders and hips designed according to the requirements of Regulation 8862 to improve driver safety.
Rear structural reinforcement.
Ergonomic foam sections developed through CAD simulations and tested by professional drivers to improve driving comfort.
Kinderpoint anti-slip fabric on shoulder bolsters.
Air Ducting System uses space between pads to improve air circulation and breathability.
Sabelt
Sabelt GT-Pad Racing Seat Pad Set
$295.00
Sabelt GT-Pad Racing Seat Pad Set
PAD SET ONLY
One of the many great things about the Sabelt GT-Pad Racing Seat is the ability to install customized pad kits. This lets you tailor the look and fit of your Sabelt GT-Pad to your individual needs by utilizing different colored and/or sized pads. Choose between red and black, M / L / XL pads to get a great-fitting and great-looking racing seat!
One pad kit weighs about 3.7 lbs (1.7 kg).
This is the pad set only. Sabelt GT-Pad Racing Seat sold separately.
Sabelt
Sabelt GT-Spine Racing Seat
$2,260.00
Sabelt GT-Spine Racing Seat
The industry's very first racing seat to earn the coveted FIA 8855-2021 homologation, the GT-Spine is good for 10 years from the date of manufacture!
This innovative gel-coated fiberglass competition racing seat by Sabelt boasts an aggressive design, DCT head protection, fireproof fabric, and high density foam. The GT-Spine seat also provides excellent lateral support and is more than a worthy choice for safety and comfort where it matters most. Sabelt GT-Spine Racing Seat Features
FIA 8855-2021: Must use F12 Brackets (see pulldown menu) High side bolstering prevents lateral movement and keeps the driver positioned like never before
Six-point harness ready with sub-belt hole in the bottom of the shell
High wear resistance velour fabric
Heavy-duty M12 mounting bolts (included)
This item must be shipped freight
Sabelt GT-Spine Racing Seat Dimensions
src="https://cdn.shopify.com/s/files/1/0647/9242/8763/files/GT_Spine_3_1024x1024.jpg?v=1662671757" alt="GT-Spine Measurements">
Sabelt
Sabelt GT3 Racing Seat
$839.00
Sabelt GT3 Racing Seat
The new Sabelt GT3 Racing Seat was re-designed with light weight and driver comfort in mind. The GT3 shell weighs 15% less than the previous model thanks to the innovative use of lightweight lamination. Additionally, the new removable leg cushion has been developed to increase driver comfort. Low side bolsters make entry and exit easy while still keeping the driver firmly (and safely) in place.
Anything but a basic racing seat, the Sabelt GT3's plush, high-wear velour upholstry, brilliant gel-coat shell, and use of high-density foam throughout add up to a very comfortable, great-looking seat without breaking the bank.
SABELT GT3 RACING SEAT FEATURES
FIA 8855-1999 homologation
Weight: 21.6 lbs (9.8 kg)
Side bolstering to prevent lateral movement
Six-point harnesses ready thanks to sub-belt holes in the bottom of the shell
High wear resistance velour fabric
Removable leg cushion