Search results for "chillout":

Chillout Systems 4" Carbon Fiber Dual NACA Duct Ultra lightweight and wind tunnel tested, the Chillout 4" Carbon Fiber Dual NACA Duct provides over 55% more airflow than a standard 3" NACA duct. Used in conjunction with Chillout 4" Neoprene Air Duct Hose and a 4" plenum, the 4" Carbon Fiber Dual NACA Duct maximizes the cooling efficiency of your driver cooling system. WHY USE NACA DUCTS AT ALL? NACA ducts bring air into a vehicle with a minimal increase in drag. The purpose of a NACA duct is to increase the flow rate of air while not disturbing the boundary layer. When the cross-sectional flow area of the duct is increased, you decrease static pressure and make the duct into a vacuum cleaner, minus the drag effects of a traditional scoop. A NACA duct starts narrow then widens in a graceful arc to increase the cross-sectional area slowly, so exterior boundary air flow doesn’t separate to cause turbulence and drag. CHILLOUT SYSTEMS 4" CARBON FIBER DUAL NACA DUCT DETAILS Manufacturer: Chillout Systems Manufacturer Part Number: CO-NP-42 Material: carbon fiber Hose outlet diameter (each): 3.92" (100mm) O.D. Hose outlets: two

Chillout Systems 3" Air Duct Plenum Chillout Motorsports 3" Air Duct Plenum connects to your Cooling System, efficiently increasing cooling performance whilst simultaneously reducing amp draw from your electrical system. The plenum is designed to fit the intake side of your Quantum Cooler, allowing for much cooler air to be forced through the system via the 3" duct. A 200 CFM blower (Minimum) is required in conjunction with the plenum for the best performance.The 3" Air Duct Plenum attaches via the plenum holder found on the front of the Quantum Cooler systems (V2 and above), creating a seal to keep the cooler pressurized with the cool air. Forcing cool air through the system and out through the exhaust side of the cooler is the most efficient way to reach maximum cooling - no wasted cool air, and the cooling shirt system appreciates every bit of cool air it can get.INCLUDED WITH THE CHILLOUT 3" PLENUM 3" Air Duct Plenum

Chillout Systems 4" Carbon Fiber NACA Duct Ultralight weight and wind tunnel tested, the Chillout 4-inch NACA duct provides over 55% more airflow than a standard 3-inch NACA duct. Used in conjunction with 4-inch Neoprene Air Duct Hose and a 4-inch Chillout Carbon Fiber Plenum (both available in the drop downs above), the Chillout Carbon Fiber NACA Duct results in maximum cooling efficiency for your cooling system. Chillout Systems 4" Carbon FIber NACA Duct Details: Manufacturer: Chillout Systems Manufacturer part number: NP-4 Material: Carbon Fiber Hose Outlet Diameter: 4" Color: Carbon Fiber NACA ducts bring air into a vehicle with a minimal increase in external drag. The purpose of a NACA duct is to increase the flow rate of air while not disturbing boundary layer airflow over your vehicle's exterior. When the cross-sectional flow area of the duct is increased, you decrease the static pressure and make the duct into a vacuum cleaner (without the drag effects of a standard scoop). The reason why the duct is narrow, then suddenly widens in a graceful arc is to increase the cross-sectional area slowly so that airflow doesn t separate and cause turbulence and drag. CHILLOUT 4" CARBON FIBER NACA DUCT FEATURES Dry carbon fiber for light weight and durability. Wind tunnel tested. 55% more airflow than 3" NACA duct. Chillout Cooler sold separately.

Chillout Systems Revolution 4-Inch Variable Speed Blower The Chillout Systems Revolution 4-Inch Brushless Blower is built to deliver maximum airflow and long-term reliability for racing environments. With a lightweight carbon fiber-reinforced housing and a conformal-coated control board, it provides precise, adjustable cooling control while withstanding the demands of motorsport use. Engineered for Maximum Cooling Control Offering variable speed operation from 30 to 420 CFM, this blower adapts to endurance or sprint racing conditions with ease. It ensures comfort and focus inside the cockpit, allowing drivers to perform at their best. Features • Variable speed airflow from 30–420 CFM • Lightweight design with rugged vibration-resistant housing • Carbon fiber-reinforced thermoplastics for durability and strength • 4-inch duct connection for higher volume cooling • Works with Chillout Systems ducting and distribution kits • Covered by a one-year manufacturer warranty Specifications CFM: 30–450 (preset at 310) Inlet Pressure: -6.5 in. H₂O Outlet Pressure: +4.5 in. H₂O Voltage: 13.8 VDC (range 11–17.5 V) Amperage: 7.5 A as shipped, 12.5 A at max Dimensions: 3.25 in. diameter × 5.25 in. length Weight: 8.45 oz / 240 g Connector: Male Deutsch DDT04-2P, 6-inch lead wire Chillout Systems Revolution 4-Inch Blower FAQs Is this blower compatible with Chillout Systems? Yes, it connects directly to Chillout air distribution setups. Can the airflow be adjusted during a race? Yes, its variable speed control allows quick adjustments while driving. What voltage does it run on? It operates at 13.8 VDC and works within a range of 11–17.5 V common in racing systems. How strong is the housing? The carbon fiber-reinforced thermoplastic construction is lightweight yet impact resistant, made for track conditions. Upgrade your cooling system with the Chillout Revolution 4-Inch Brushless Blower.

Chillout Systems 4" Neoprene Air Duct The Chillout 4" Neoprene Air Duct Hose is extremely flexible, pliable and structurally strong thanks to a coated spring-steel wire support helix that prevents it from collapsing. The fiberglass fabric cover and fiberglass cord are both impregnated and coated with neoprene rubber. With a functional temperature range between -45º F to 330º F, this makes it ideal for most applications, most importantly bringing fresh/cool air to your Quantum Cooler. Also perfect for cockpit cooling and other low-pressure ducting applications where extreme heat can't be avoided. Under-hood applications such as connecting an air intake to an air box, or an air box to a throttle body are also great uses. FEATURES 4" ID (inside diameter) Heat resistant to 330º F Remains flexible down to -45º F

Chillout Systems IceBox Spare Battery The Chillout Systems IceBox Spare Battery is a replacement rechargeable battery for the Chillout Systems IceBox Cooler System. Designed for racers, endurance teams, and track day drivers, this spare battery helps keep your IceBox cooling system ready for long days at the track. Having an extra battery on hand is especially useful for endurance racing, back-to-back sessions, hot weather events, or teams running multiple driver stints. Swap in a charged spare battery and keep the IceBox operating without waiting for the original battery to recharge. IceBox Spare Battery Features Replacement battery for the Chillout Systems IceBox Cooler System 10,000 mAh rechargeable battery Helps support extended track use and endurance racing Ideal spare for race weekends, testing days, and hot-weather events Works with the IceBox system’s rechargeable battery setup Compact design for easy storage in the trailer, paddock, or spares kit Built for Race Weekend Convenience The Chillout Systems IceBox uses a rechargeable battery system to power its cooling circulation. Keeping a spare battery charged and ready gives drivers and crews more flexibility during long race weekends, especially when track time is limited and cooling performance is critical. For endurance teams, a spare battery can help simplify pit stop planning and driver changes. Instead of waiting for a battery to recharge, the crew can swap in a fresh battery and keep the cooling system ready for the next stint. Why Keep a Spare IceBox Battery? A spare IceBox battery is a smart addition for any driver using the Chillout Systems IceBox Cooler System. It gives you backup power, reduces downtime, and helps ensure your driver cooling system is ready when cockpit temperatures climb. Chillout Systems IceBox Spare Battery Details Brand: Chillout Systems Part Number: CO-12V10KB Battery Capacity: 10,000 mAh Application: Chillout Systems IceBox Cooler System

Chillout Systems Carbon Fiber Air Duct Plenum Forcing fresh air to your cooler is the most efficient way to increase cooling performance and reduce amp draw from your electrical system. This plenum fits perfectly to the intake side of your Quantum Cooler, allowing much cooler air to be forced through the system via any three-inch duct (cooler, ducting, and intake scoop not included). A minimum Uber3 blower (sold separately) should be used in conjunction with the plenum in order to cool properly. This carbon fiber plenum attaches via automotive-grade adhesive tape, creating a firm seal to keep the cooler pressurized with incoming cool air. This forces cool air all the way through the system and back out the exhaust side of the cooler, the most efficient way to reach maximum cooling capacity. Coupling the Chillout Systems Air Duct Plenum with your Quantum Cooler ensures no cool air is wasted, maximizing the effectiveness of the system.  

Chillout Systems No Drip 1/4" Shirt Adapters No Drip Adapters from Chillout Systems are designed to never leak and maximize the reliability of your driver cooling unit without the annoying "drip" when you disconnect.  Chillout Systems No Drip 1/4" Shirt Adapter Details Manufacturer: ChillOut Systems Manufacturer Part Number: CO-DLC-1 Works with other ¼" cooling shirts: Yes Quantity: 4 Pieces (2 complete sets) We have found in very long endurance races such as the World Racing league 24 Hours of Sebring, multiple driver changes have parasitic loss of fluid during the repetitious connecting of the drivers shirts. No Drip adapters also prevent unintentional release as the Shirt Adapters lock together, linking the hose to your system securely.

Chillout Systems 3" Carbon Fiber NACA Duct Chillout Systems 3" NACA duct is manufactured in lightweight carbon fiber with the intention of reduced parasitic drag while providing cooling air for Chillout Systems coolers, driver helmets, oil coolers and more.  Chillout Systems 3" Carbon FIber NACA Duct Details Manufacturer: Chillout Systems Manufacturer part number: NP-3 Material: Carbon Fiber Hose Outlet Diameter: 3" Color: Carbon Fiber NACA ducts bring air into a vehicle with a minimal increase in external drag. The purpose of a NACA duct is to increase the flow rate of air while not disturbing boundary layer airflow over your vehicle's exterior. When the cross-sectional flow area of the duct is increased, you decrease the static pressure and make the duct into a vacuum cleaner (without the drag effects of a standard scoop). The reason why the duct is narrow, then suddenly widens in a graceful arc is to increase the cross-sectional area slowly so that airflow doesn't separate and cause turbulence and drag. Chillout Cooler sold separately.

Chillout Systems Wiring Harness This 10 AWG wiring harness features a 10-foot shock-resistant rubber power cord wrapped in a protective textile fabric. Overall length is 14 feet.

Chillout Systems 4-Inch 285 CFM Blower Chillout 4-inch 285 CFM blower offers high air output at a low 4.7 amp draw. Lightweight composite ABS housing makes the Chillout 4" blower the most powerful and reliable in its class. CHILLOUT 4-INCH BLOWER FEATURES 285 cubic feet per minute (CFM) 4.7 Amps 12 Volts Lightweight, durable, and ultra-reliable

ChillOut Motorsports IceBox 12V Automotive Hardwire Kit Keep your ChillOut Motorsports IceBox powered directly from your vehicle with the IceBox 12V Automotive Hardwire Kit. Designed as a simple alternative to running the IceBox from a portable power pack, this kit connects the cooler's USB Type-C power input directly to your vehicle's 12V electrical system. The 10-foot cable provides plenty of length for clean routing through a race car, track car, or support vehicle, while the bare-wire connection allows for a permanent or semi-permanent installation. With direct vehicle power, there is no battery pack to recharge or swap between sessions. Key Features Designed for the ChillOut Motorsports IceBox cooling system USB Type-C connector to bare-wire power leads Connects the IceBox directly to a vehicle's 12V electrical system 10 ft / 3048 mm cable length Rated for up to 3 amps Eliminates the need to rely on a separate portable power pack Ideal for race cars, track cars, and other motorsports applications Provides continuous IceBox power while the vehicle electrical system is supplying power Direct 12V Power for Your IceBox For drivers who want a more permanent IceBox installation, the 12V Automotive Hardwire Kit provides a clean way to integrate the cooling system into the vehicle. Instead of monitoring and recharging a separate battery pack, the IceBox can receive power directly from the car. This setup is especially useful for endurance racing, track days, HPDE events, and other applications where the cooling system may be used for extended periods throughout the day. Specifications Connection: USB Type-C to bare wire Input application: 12V automotive electrical system Cable length: 10 ft / 3048 mm Current rating: 3 A Application: ChillOut Motorsports IceBox Installation Notes The bare-wire end of the harness is intended to be connected to an appropriate 12V power source in the vehicle. Proper circuit protection and wiring practices should be used when integrating accessories into any automotive electrical system. Route the cable away from excessive heat, sharp edges, moving components, and other areas that could damage the wiring. Frequently Asked Questions Q: What does the IceBox 12V Automotive Hardwire Kit do?A: It allows the ChillOut Motorsports IceBox to receive power directly from a vehicle's 12V electrical system instead of relying on a separate portable power pack. Q: What connectors are included?A: The kit uses a USB Type-C connector for the IceBox and bare wires on the vehicle side for installation into a 12V electrical circuit. Q: How long is the cable?A: The cable is approximately 10 feet, or 3048 mm, long. Q: What is the amperage rating?A: The hardwire kit is rated for up to 3 amps. Q: Does this replace the IceBox power pack?A: It provides an alternative way to power the IceBox directly from the vehicle, eliminating the need to use a portable power pack while the hardwired system is supplying power. Q: Is this intended for permanent installation?A: It can be used for a clean permanent or semi-permanent vehicle installation depending on how the 12V connection is configured.

Chillout Systems IceBox Maintenance Formula Keep your personal driver cooling system clean, lubricated, and performing at its best with Chillout Systems IceBox Maintenance Formula. Designed for the Chillout IceBox and other personal ice-based cooling systems, this specialized additive helps remove damaging residue and mineral buildup from critical internal components. Regular use lubricates the pump, valves, and cooling lines while helping inhibit corrosion throughout the system. Chillout Systems recommends adding the Maintenance Formula with every fill to maintain consistent cooling performance and help extend the life of your equipment. Key Features Helps remove residue and mineral buildup Lubricates the pump, valves, and cooling lines Helps inhibit corrosion inside the cooling system Supports consistent cooling-system performance Designed for the Chillout IceBox and other personal ice-based cooling systems Biodegradable formulation Resealable stand-up pouch for convenient storage and dispensing Contains 50.7 fl oz / 1.5 liters Recommended Use and Dosage Chillout Systems recommends using the IceBox Maintenance Formula every time the cooling system is filled. For the 17-liter Chillout IceBox, add 2 oz of Maintenance Formula per fill. Consistent use helps prevent mineral deposits and residue from restricting fluid flow or reducing cooling-system performance. Always follow the dosing instructions provided with your specific cooling system. Product Details Manufacturer: Chillout Systems Product: IceBox Maintenance Formula Part Number: CO-IBMF Container Size: 50.7 fl oz / 1.5 liters 17L IceBox Dosage: 2 oz per fill Application: Personal ice-based driver cooling systems Package: Resealable stand-up pouch with dispensing spout Storage and Handling Store the Maintenance Formula at room temperature and keep the pouch securely sealed when it is not in use. If the formula freezes, allow it to thaw completely to room temperature and shake the pouch before use. Frequently Asked Questions What does Chillout IceBox Maintenance Formula do?It helps remove residue and mineral buildup while lubricating the pump, valves, and cooling lines. It also helps inhibit corrosion inside the cooling system. How much Maintenance Formula should I use?For the 17-liter Chillout IceBox, add 2 oz of Maintenance Formula each time the system is filled. Should I use the formula with every fill?Yes. Chillout Systems recommends using the Maintenance Formula with every fill to help maintain cooling performance and protect internal components. Can it be used with other driver cooling systems?The formula is designed for the Chillout IceBox and other personal ice-based cooling systems. Follow the dosing instructions for your specific cooling system. How much formula is included?Each resealable pouch contains 50.7 fluid ounces, or 1.5 liters, of IceBox Maintenance Formula. What should I do if the formula freezes?Allow it to thaw completely to room temperature, then shake the pouch thoroughly before use.

Chillout Systems Carbon Fiber Air Duct Plenum Forcing fresh air to your cooler is the most efficient way to increase cooling performance and reduce amp draw from your electrical system. This plenum fits perfectly to the intake side of your Quantum Cooler, allowing much cooler air to be forced through the system via any four-inch duct (cooler, ducting, and intake scoop not included). A minimum 150 CFM blower (sold separately) should be used in conjunction with the plenum in order to cool properly. KEEPS YOUR QUANTUM COOLER...COOLER This carbon fiber plenum attaches via automotive-grade adhesive tape, creating a firm seal to keep the cooler pressurized with incoming cool air. This forces cool air all the way through the system and back out the exhaust side of the cooler, the most efficient way to reach maximum cooling capacity. Coupling the Chillout Systems Air Duct Plenum with your Quantum Cooler ensures no cool air is wasted, maximizing the effectiveness of the system.

Chillout Systems Neoprene Air Ducting Chillout Systems Neoprene 3" Air Duct Hose is used to direct cooling air into a Chillout Systems cooler or take the coolers heated exhaust air and exit outside of the interior compartment. Flexible, pliable and structurally strong thanks to a coated spring-steel wire support helix that prevents it from collapsing the fiberglass fabric cover and fiberglass cord are both impregnated and coated with neoprene rubber. DETAILS Manufacturer: Chillout Systems Manufacturer part number 6 Foot: CH-ADH3-6 Manufacturer part number 12 Foot: CH-ADH3-12 Inside diameter: 3 inches Temperature range: -45° F to 330° F With a temperature range between -45º F to 330º F, this makes it ideal for most applications, most importantly bringing fresh/cool air to your Quantum Cooler. Also perfect for cockpit cooling and other low-pressure ducting applications where extreme heat can't be avoided. Under-hood applications such as connecting an air intake to an air box, or an air box to a throttle body are also great uses.