Search results for "chillout":

Chillout Systems Genesis-Advanced Driver Cooling System Genesis – Advanced Driver Cooling System for Endurance and Pro Racing The Genesis is not just another driver cooling box—this is Chillout Systems’ flagship solution, engineered to handle the punishing demands of endurance racing, extreme heat, and full-tilt track days. With up to 525W of active cooling power and a race-ready carbon fiber chassis, this system doesn’t flinch when the heat is on. Using a high-efficiency brushless micro compressor and a precision-tuned liquid cooling loop, the Genesis rapidly pulls heat away from your core. The result? Less fatigue, better mental clarity, and sustained performance when it matters most. A cockpit-mounted digital controller lets you adjust on the fly—so whether you’re on a pace lap or deep into a green-flag stint, you stay in control. From the quick-release baseplate to the included Chillout digital controller, this is pro-grade hardware for drivers who demand the best. Genesis System Features: Carbon Fiber Shell: Lightweight, strong, and heat-resistant to survive brutal cockpit conditions. Quick-Release Baseplate: Allows rapid removal and reinstallation between sessions or drivers. Digital Cockpit Controller: Manage cooling power and settings without ever leaving the driver’s seat. Low-Draw Mode: Ideal for pit stops, safety cars, or low-load intervals to reduce electrical strain. Brushless Micro Compressor: Compact and efficient, built for high-output cooling without high amp draw. Fully Compatible: Works with all Chillout shirts and standard insulated coolant hose kits. What’s in the Box: • Genesis CO-GCV1 Cooling System• Carbon Fiber Baseplate• External Blower• Wired Digital Controller• Power Inverter• Coolant Formula (1 Bottle)• 8AWG Wiring Harness• Mounting Feet and Locking Pins Chillout Genesis Cooling System FAQs: How much cooling power does the Genesis deliver?The system produces up to 525W of active cooling—more than enough to regulate core temperature in endurance racing conditions. Is it compatible with non-Chillout cooling shirts?It’s optimized for Chillout gear but also works with standard insulated coolant hose systems. Can I adjust cooling during a race?Yes, the wired digital controller mounts in your cockpit for real-time performance tuning. What makes the Genesis different from other cooling units?The Genesis features carbon fiber construction, a low-amp brushless compressor, and pro-level modularity—making it the most advanced system in Chillout's lineup. If you’re serious about peak performance in the heat of competition, the Genesis system is your secret weapon. Keep your cool, race harder, and finish stronger with Chillout Systems Genesis.

ChillOut Systems Rapid Release Kit The Rapid Release dry break system makes driver changes fast and effortless. No fumbling with tubes or connectors while under pressure, just a quick press and coolant/water starts flowing instantly. In an emergency, the connectors release when a force greater than 10 lbs is applied. The kit comes with two style car mounts, a roll bar mount and a flat surface mount which connects to the cooling system. Also included is a driver-side handle that quickly connects your shirt or balaclava to the car mount already fixed in the car. The car mounts can be fitted to the roll bar with the roll bar mount whereas the flat mount can be mounted in various places like the transmission tunnel, seat, etc. via the flat-mount. CHILLOUT RAPID RELEASE KIT FEATURES Effortless dry break system Emergency release feature INCLUDED WITH CHILLOUT RAPID RELEASE KIT 2 x 1/4" barbed quick release fittings 1 x flat surface mount 1 x roll-bar mount 1 x driver side handle 2 x 36" reinforced, non-kinking extensions 2 x 1/4th to 5/16th barrel connectors 2 x 1/4th to 1/4th barrel connectors DETAILS Manufacturer: ChillOut Systems Manufacturer Part Number: RRHS Material: Lightweight composite Cooling hose side or shirt side: Shirt side COMPONENTS 2 x 1/4" barbed quick release fittings 1 x driver side handle With the simplest of designs that works every time, a quick press and the Chillout coolant formula starts flowing instantly. To disconnect or in an emergency, the ChillOut Systems rapid release handle kit for cooling shirts automatically releases when a force greater than 10lb is applied.

Chillout Systems Club Series Cooling Shirt   The goal with the Club Series cooling shirt is to provide drivers with most comfortable driver cooling shirt on the market, maintaining safety and comfort at an affordable price. Chillout nailed it! The Club Series is an entry level cooling shirt, but don't let that fool you. It's made from dual layers of soft stretch cotton concealing a strategically structured layer of thermal conductive cooling veins that target the most vital region of the body – the core.  They are designed to work with Chillout's incredible refrigerant-based Quantum Cooling system but work equally well with icewater-based systems like Paragon or F.A.S.T.  The Club Series shirt has cooling efficiency similar to other brands, but in a high-quality, custom designed shirt with the cooling veins hidden between two ultra thin layers of stretch fabric. The stretch fabric is crucial to holding the cooling veins close to the body where heat exchange takes place. With cooling veins constructed of a matte fire-resistant, self-extinguishing compound developed by the US military, this cooling shirt is rugged and durable, perfect for racing, HPDE, or test days..  Featuring dry-release hose connectors, spillage isn’t an issue because the fluid stops when disconnected. ADD CONNECTORS For maximum adaptability, Chillout shirts do not come with connectors. Choose the Chillout Dual Prong connector to connect to a Chillout Systems Quantum Cooler. You can purchase Coolshirt male connectors (sold separately) to hook up to your Coolshirt cooler.

Chillout Pro Sport SFI 3.3 Rated Fire-Resistant Balaclava Engineered for serious racers, the Chillout Pro Sport Single Layer Balaclava delivers SFI 3.3-rated fire resistance with advanced thermal regulation. Whether you're on the grid for a sprint or endurance event, this balaclava is designed to keep you cool, focused, and protected. UNMATCHED COOLING, PROTECTION AND COMFORT The Chillout Pro Sport underlayers are revolutionizing motorsports with thermal-regulating materials that can reduce skin temperature by up to 8°F—enhancing reflexes and reducing fatigue under pressure. Ultralight fabrics maximize airflow to keep you cool in the heat of competition. Woven with antibacterial technology, this balaclava neutralizes 99% of odor-causing bacteria, keeping you fresh during the longest stints. SFI Certification: 3.3 Compliant Sizes: One Size Fits Most Color Options: Black, Charcoal, White Material Composition: 42% M-Aramide, 42% Viscose FR, 16% EA USAGE AND SAFETY Ensure a proper fit for optimal protection. The neck, wrists, and ankles must always be covered by at least two layers of fire-resistant gear. Overlap between balaclava and top underlayers must be a minimum of 3cm (1.2"), and 8cm (3.2") at the front center. Overlap between top and bottom garments must be at least 7cm (2.8"). MAINTENANCE TIPS Follow label instructions for cleaning and ironing. Avoid extended sunlight exposure, which can prematurely age materials and alter colors. Replace garments showing wear or damage. Minor repairs must use original materials. Chillout Systems assumes no responsibility for damage due to misuse or incorrect maintenance. EUROPEAN CERTIFICATION This balaclava complies with EEC Directive 89/686 and meets essential health and safety standards. Certified by CSI S.p.a. (No. 0497) with routine production audits conducted by the certification body.

Chillout Systems Pro Touring Sport Cooling Shirt (SFI Rated) The Chillout Systems Pro Touring Sport driver cooling shirt is SFI-rated and has 160 ft. of certified cooling veins structurally spread throughout the shirt's Nomex material. This extensive coolant tubing covers three times more of the human torso than competing cooling shirts. WINNING RACES REQUIRES COOL THINKING Heat exhaustion can break your focus and cause you to make mistakes on a race track. The structured cooling vein design of Chillout Systems garments cools your core even at temperatures close to ambient (55o F optimum), cooling the whole body and boosting your mental acuity. Systems using ice water are often too cold for efficient cooling, causing the capillaries just below the skin surface to close, slowing blood flow back to your core. Ice water systems can give the perception of cooling by changing the temperature of the skin without actually lowering your body temperature. The Chillout Systems Pro Touring Sport SFI Cooling Shirt is fire-rated and specifically designed to contour to your torso, simulating a second skin to maximize contact between the cooling veins and your body. CHILLOUT SYSTEMS PRO TOURING SPORT COOLING SHIRT DETAILS Manufacturer: Chillout Systems SFI-rated Single layer Lightweight Triple the tubing ADD CONNECTORS TO FIT YOUR SYSTEM Chillout Pro Touring shirts do not come standard with hose-end connectors. For use with a Chillout Systems cooler, you will need to get a Chillout Systems dual prong adapter. For use with a Paragon or Coolshirt cooler, please get Coolshirt male connectors.

Chillout Systems Insulated Coolant Hose The Chillout Hose is insulated liquid-transfer tubes encased in an ultra-durable, tear-resistant fabric shield. Six to ten feet of hose that connects your cooling garment to the driver cooling unit with fittings for a consistent flow cycle. Hose too long for your set-up? Solution: cut hose to desired length. Our hoses comes with an extra supply of matching shrink wrap for a flawless, durable, clean look. CHILLOUT INSULATED COOLANT HOSE FEATURES The 10-Foot hose includes additional heat shrink tubing for custom sizing while maintaining a finished look. Male connectors, two pieces. Female dual-prong connector to connect cooler, one piece Can be connected to other hoses to extend length (including Y connector). Double-Layer Insulation: one layer to protect the hose, a second to keep your coolant cool and efficient.

Chillout Chill Station - Pit Cooler Every team wants to win the race, make sure your team is equipped to and is performing at their very best by staying cool under the heat and pressure of competition.  Pre-cool your drivers while keeping your crew comfortable and focused with our extremely powerful and light weight pit cooler system. The Chill Station easily keeps 6 adults cool (or up to 12 adults with 6 x Y split hoses) thanks to 3 super powerful 1,870 BTU rotary micro-compressors on board. A sizable 40 liter per minute pump system maintains 20 psi at all times ensuring everyone connected remains cool.A real game changer, the Chill Station creates a micro-climate inside that keeps you sweat free while out of the car. Perfect for endurance teams with multiple drivers and teams that are operating in intense climates on track.CHILLOUT CHILL STATION PIT COOLER FEATURES 3 x 1,870 BTU rotary micro-compressorsConnect up to 12 adults (using our Y-split hoses)Pumps 40 L per minute at 20 psi CHILLOUT CHILL STATION PIT COOLER INCLUDES Chill StationPower Cable  

Chillout Systems Pro Touring Cooling Shirt FIA/SFI When the heat is on—literally—this is the cooling shirt that steps up. The Chillout Systems Pro Touring Cooling Shirt offers full-coverage performance cooling with professional-grade FIA and SFI approvals. Whether you’re running endurance races in brutal temps or hammering through back-to-back sessions, this shirt keeps your core cool, your mind sharp, and your focus laser-locked. It’s race-proven tech that goes under your suit but works overtime to keep you on top of your game. Maximum Cooling Performance with FIA/SFI Approval Features: Superior Cooling Coverage: With up to 160 feet of precision-placed tubing, this shirt offers maximum body coverage for more effective core temperature regulation in the harshest racing conditions. Contoured Fit for Optimal Contact: Designed to hug the torso like a second skin, ensuring the cooling veins stay flush with your body and don't shift while you drive. Better contact equals better cooling and less distraction. Advanced 8-Circuit Cooling: Eight individual coolant circuits work in unison to eliminate hot spots and provide fast, balanced heat dissipation across your entire upper body. Antimicrobial Construction: Woven with bacteria-fighting fibers that keep your shirt fresher for longer—even during multi-day race weekends. Certified safe and skin-friendly. FIA & SFI Certified: Approved to FIA 8856-2018 and SFI 3.3 standards for professional use in sanctioned motorsport events. Custom Fit Options: Choose the correct fitting option to match your cooling system. Sizes 3XL and above require an 8-week lead time due to custom production. Chillout Systems Pro Touring Cooling Shirt FAQs: Is this shirt compatible with all Chillout cooling systems? Yes, but you must select the proper fitting to match your system. Compatibility is system-dependent. How long does it take to receive a 3XL or larger size? Larger sizes (3XL+) are made to order and require up to 8 weeks for production. These are not stocked items. Can I use this cooling shirt without FIA/SFI certification? Yes, but the FIA/SFI approval means it's also safe and compliant for professional-level competition if needed. Is this shirt machine washable? Hand washing is strongly recommended to preserve the tubing and antibacterial properties. Do not use fabric softener. Stay cool and stay competitive with the Chillout Systems Pro Touring Cooling Shirt—because overheating should never be the reason you miss a podium.

Chillout Pro Sport Dual Layer Balaclava FIA/SFI RATED HEAT AND FIRE RESISTANCE Chillout Pro Sport underlayers are turning the racing world on its head with the latest technology which will give you a performance advantage on the track. The Pro Sport flame and heat resistance underlayers are thermal regulating which can reduce your skin temperature by up to 8º F which will quicken your reflexes and reaction time on the track. THERMO REGULATING The ultra-lightweight materials prioritize airflow to help you regulate your body temperature during the heat of battle on the track. Chillout Pro Sport underwear is the only FIA & SFI approved thermal regulating underlayers available on the planet to be sure you meet the most stringent homologation standards for your race sanctioning body. Chillout Pro Sport underlayers sport antibacterial technology woven into every thread to neutralize 99% of bacteria to keep you fresh and focused on the track regardless of the length of your driving stint. If you are serious about winning, then you need Chillout Pro Sport underlayers in your gear bag. DETAILS FIA Homologation Standard: FIA 8856-2018 SFI Homologation Specification: SFI 3.3 Sizes: one size Colors: black, charcoal, or white Composition: 42% M-Aramide, 42% Viscose FR, 16% EA Sizing and Usage Please ensure that your Chillout Pro Sport garments are not too tight, as this reduces the level of protection, and that they are also comfortable to wear under the actual conditions of use. In order to obtain the maximum protection, all the clothing required in Appendix L (Chapter III, Article 2) to the FIA International Sporting Code should be used. Wearers are warned of the particular vulnerability of the neck, wrists, and ankles.  The neck, wrist, and ankles shall always be covered by at least two articles of protective clothing. The balaclava and top underlayers shall overlap by a minimum of 3cm / 1.2" around the driver's neck, except at the front center line where there shall be 8cm / 3.2" overlap. The top and bottom underlayers shall overlap by a minimum of 7cm / 2.8" around the drivers waist. Maintenance of Chillout Pro Sport Underlayers Chillout Pro Sport flame resistant underwear must be cleaned and ironed according to the instructions on the label and always to be handled with care.  Drivers should replace any and all items as soon as they show signs of wear. Please note that the materials are light sensitive and should not be exposed to direct sunlight for a prolonged period of time.  Sunlight especially can cause changes in the shade of colors and begin the premature aging of the materials. Embroidery/Labels on Chillout Pro Sport Underlayers Protective clothing, while designed to offer protection against heat and flames, may not safeguard against all potential hazards encountered in automobile racing. It is essential that users adhere to the guidelines outlined in this manual. Proper sizing and usage are imperative for optimal protection. Users should ensure that garments are not overly tight, as this can compromise protection levels, and that they are comfortable to wear under actual usage conditions. For maximum protection, it is recommended to utilize all clothing items specified in Appendix L (Chapter III, Article 2) of the FIA International Sporting Code. Wearers should pay particular attention to the vulnerability of the neck, wrists, and ankles, ensuring they are covered by at least two articles of protective clothing. Specific overlap measurements are provided for various garment combinations, detailed within this manual. Embroidery and badges should be applied in accordance with fireproof standards outlined in ISO 15025. Only the garment manufacturer is authorized to apply advertising through printing or transfers, and certification from the manufacturer is necessary for any customized garments. Any alterations or customizations not meeting these standards may invalidate the garment's homologation, potentially resulting in penalties or disqualification during events. In case of uncertainty regarding advertising additions, it is advisable to consult the manufacturer. Cleaning/Maintenance of Chillout Pro Sport Underlayers The clothing items must be cleaned and ironed following the instructions provided on the label and handled with due care and attention at all times. Garments showing signs of wear should be replaced promptly. It is important to be aware that the materials used in the clothing are sensitive to light and should not be exposed to direct sunlight for prolonged periods. Exposure to sunlight can result in changes to the colors and premature aging of the materials. If your clothing sustains damage such as tears, abrasions, or exposure to heat and flames, it must be replaced. However, if minor tears can be repaired, the same materials and fabrics originally used in manufacturing must be utilized for the repair. Chillout Systems bears no responsibility for any damage incurred by users or third parties due to improper use, abuse, or incorrect maintenance of the clothing, including any improperly repaired garments. EEC Certification/Guarantee of Chillout Pro Sport Underlayers Chillout Systems clothing is certified in compliance with Directive 89/686/EEC and the essential safety requirements outlined in Document II of the directive. Certification has been issued by CSI s.P.a.'s head office, a certified body of the European Commission (No. 0497), with additional production controls conducted by CSI s.P.a. itself.

Chillout Cypher Micro Cooler Discover the Ultra-Lite Cypher Micro Cooler - the Formula-sized cooling powerhouse. Weighing just 5.7 lbs, its carbon fiber mounting plate ensures maximum efficiency. Compact & Versatile: Measuring 7.87" x 4.09" x 6.90", the Cypher's compact design allows flexible mounting, guaranteeing unparalleled adaptability and performance. User-Friendly Control: Adjust settings effortlessly with the included multi-function remote. Optimum Cooling: Equipped with dual 175 CFM fans, the Cypher moves a remarkable 350 cfm of air, eliminating the need for an inline blower. Experience cool, focused, and in-control racing with the Ultra-Lite Carbon Fiber Cypher Pro Micro Cooler - your ultimate solution for staying ahead on the tr The Chillout Cypher Micro Cooler cooling system is designed for small cockpit race cars while providing excellence in driver temperature comfort. CHILLOUT CYPHER MICRO COOLER DETAILS: Manufacturer: Chillout Manufacturer part number: CO-CYV1 Size: 7.87” x 4.09” x 6.90” Weight: 5.7lbs Input voltage: 10.6 - 14.2 Mounting plate material: Carbon fiber  CHILLOUT CYPHER MICRO KIT INCLUDES: 1x In-line voltage converter. 1x Carbon Fiber Mounting Plate. 1x Carbon Fiber Plenum 1x Wiring harness. 1x fill/priming bottle  1x Wired remote  36 inches of coolant tubes 1x External fan wiring harness. This is used to power a 12 volt external fan when eliminating the top fans and utilizing the carbon plenum. This is an option in place of the dual 175 cfm fans allowing a 3 inch duct to permanently attach in their place. When using this duct, a 3 inch 275 CFM fan (Uber3) is required for operation.    LIGHTWEIGHT DESIGN At a featherweight 5.7lbs, Chillout Cypher is the lightest Chillout cooler to date. Constructed using the lightest, most advanced materials, the 5.7lbs weight also includes the carbon fiber quick-release mounting plate.  SMALL FOR A REASON Crew chiefs always need more space. The Chillout Cypher measures 7.87” x 4.09” x 6.90” to increase your mounting location options. DASH MOUNTED MULTI FUNCTION REMOTE The easy to install remote control allows you to change your shirt temperature, Now control your remote mounted Chillout Cypher while strapped into your race seat. DUAL 175 CFM FANS Utilizing two 175 cfm internal brushless fan motors you will achieve 350 cfm of cooling air. This eliminates the need for an external blower system and the smallest footprint inside your race car.

Chillout Systems 1.5 Liter Coolant Formula 1.5 liters of coolant will last a single racer an entire season! Non-toxic and biodegradable coolant that circulates through your Chillout Systems cooler and cooling garments, keeping you cool and your cooler running in prime condition. Does not evaporate, greatly extending the amount of time between refilling your system. Chillout cooling garments encase tubular veins within the material, covering a large surface area of the body to keep you cool, dry, and focused. We suggest you replace the Chillout Coolant in your system at least once per race season. It takes less than two minutes and keeps your cooling system running in peak condition.

Revolution 3-Inch Variable Speed Brushless Blower The Chillout Motorsports Revolution 3-Inch Brushless Blower redefines cockpit cooling for drivers who demand reliability and performance. With a conformal-coated control board and carbon fiber-reinforced thermoplastic housing, it provides adjustable airflow and durability for the toughest racing conditions. Adjustable Cooling for Every Racing Environment Offering variable speed control from 30 to 310 CFM, this blower adapts to changing track demands. Whether in endurance events or short sprints, it ensures comfort and focus behind the wheel with lightweight construction and efficient airflow. Features • Variable speed operation: 30–310 CFM for complete control • Compact, lightweight design at just 8.45 oz • Carbon fiber-reinforced housing for strength and impact resistance • Seamless compatibility with Chillout Systems ducting • One-year manufacturer warranty Specifications CFM: 30–310 (preset at 280) Inlet Pressure: -6.5 in. H₂O Outlet Pressure: +4.5 in. H₂O Voltage: 13.8 VDC (range 11–17.5 V) Amperage: 6.5 A as shipped, 10.5 A at max Dimensions: 3.25 in. diameter × 5.25 in. length Weight: 8.45 oz / 240 g Connector: Male Deutsch DDT04-2P, 6-inch lead wire Revolution 3-Inch Brushless Blower FAQs Is this blower compatible with Chillout cooling systems? Yes, it works seamlessly with all Chillout Systems air distribution setups. Can airflow be adjusted during a race? Yes, the variable speed feature allows on-the-fly adjustments. What voltage is required? It runs on 13.8 VDC, with a range of 11–17.5 V for motorsport systems. How durable is the blower housing? The reinforced thermoplastic with carbon fiber ensures strength and impact resistance. Upgrade your cockpit cooling with the Chillout Revolution 3-Inch Brushless Blower.

Chillout Cypher Pro Ultra-Lite Carbon Fiber Micro Cooler Introducing the Ultra-Lite Carbon Fiber Cypher Pro Micro Cooler - the compact powerhouse for Formula-sized cooling needs. Weighing a mere 4.7lb, this cooler is ideal for small cabins/cockpits and weight-sensitive race applications, ensuring you stay cool, focused, and in control. Its dual 175 CFM fans guarantee optimum performance, while the carbon fiber mounting plate adds to its lightweight design. Ultra-Lightweight: The Cypher weighs just 4.7 lbs, featuring a carbon fiber mounting plate for maximum efficiency. Compact & Versatile: With dimensions of 7.87" x 4.09" x 6.90", this cooler can be flexibly mounted in various locations, offering unparalleled adaptability and performance. Effortless Control: The Cypher includes a user-friendly remote, making it easy to adjust settings at your convenience. Powerful Cooling:Equipped with dual internal brushless fans, the Cypher effectively moves 350 CFM of air, eliminating the need for an inline blower. Enhance your racing experience with the Ultra-Lite Carbon Fiber Cypher Pro Micro Cooler - your ultimate solution for staying cool and in control on the track. The Chillout Cypher Pro Ultra Light cooling system is designed for small cockpit race cars or teams needing to be at the lowest possible scale weight while providing driver comfort. CHILLOUT CYPHER PRO ULTRA-LIGHT KIT DETAILS: Manufacturer: Chillout Manufacturer part number: CO-CYP1 Size: 7.87” x 4.09” x 6.90” Weight: 5.7lbs Input voltage: 10.6 - 14.2 Mounting plate material: Carbon fiber  CHILLOUT CYPHER PRO ULTRA-LIGHT KIT INCLUDES: 1x In-line voltage converter. 1x Carbon Fiber Mounting Plate. 1x Carbon Fiber Plenum 1x Wiring harness. 1x fill/priming bottle  1x Wired remote  36 inches of coolant tubes 1x External fan wiring harness. This is used to power a 12 volt external fan when eliminating the top fans and utilizing the carbon plenum. This is an option in place of the dual 175 cfm fans allowing a 3 inch duct to permanently attach in their place. When using this duct, a 3 inch 275 CFM fan (Uber3) is required for operation.  LIGHTWEIGHT DESIGN At a featherweight 5.7lbs, the carbon fiber intensive Cypher is the lightest Chillout cooler to date. Constructed using the lightest, most advanced materials, the 5.7lbs weight also includes the carbon fiber quick-release mounting plate.  SMALL FOR A REASON Crew chiefs always need more space. The Chillout Cypher Pro Ultra-Lite measures 7.87” x 4.09” x 6.90” to increase your mounting location options. DASH MOUNTED MULTI FUNCTION REMOTE The easy to install remote control allows you to change your shirt temperature, Now control your remote mounted Chillout Cypher while strapped into your race seat. DUAL 175 CFM FANS Utilizing two 175 cfm internal brushless fan motors you will achieve 350 cfm of cooling air. This eliminates the need for an external blower system and the smallest footprint inside your race car.

Chillout Systems Quantum Cooler Pro The Chillout Systems Quantum Cooler series of coolers are the most powerful portable iceless cooling systems ever designed for auto-racing. Requiring no ice, this driver cooling system is completely maintenance-free, running solely off the strength of a rotary micro-compressor that is as powerful as other compressors 5x its size. Rated at 20 liters per minute/16 psi, the Quantum Pro system is capable of chilling to under 35 F. Max amp draw is rated at 18-22 amps, depending on installation and environmental conditions. System contains less than 1.75 oz. of freon sealed within the rotary micro-compressor system. The Quantum Pro offers many different temperature settings that support varying performance conditions. Dual 220-cfm fans help decrease amp draw, and a bright, easy-to-read color digital display offers valuable information and data. Weighing in at 10.5 lbs, the Quantum Pro is portable and hot-swappable so you can quickly move it from mounting location to mounting location within seconds. A dash-mountable digital control display is available for cooler installations out of the driver's reach. When planning installation, please consider the interior temperature of your vehicle under racing conditions. Keep in mind that ducting is necessary for many installations to achieve the best results. Using four-inch ducting is highly recommended and eliminates the need for a supplemental blower. Three-inch ducting is restrictive and requires the use of a high performance (250+ cfm) blower. Quantum Pro vs Quantum V3 Full-color LCD display with extensive data Internal bypass valve eliminates the need for a coolant loop. System continues to cool the reservoir even when the shirt is disconnected. Dual 4-inch, 220 cfm brushless fans 50% larger condenser vs V3 25% larger evaporator vs V3 LiPo / Li-ion battery support outlet at 24 volts. Supports parallel power at 12 and 24 volts simultaneously, no downtime between power sources. Coolant reservoir has double the capacity at 13 oz. Eco mode maintains system under 18 amps at all times. Carbon fiber mounting plate further reduces weight and heat-soak. Two flow sensors for monitoring both sides of the flow valves for easy troubleshooting and maintenance. IP65 rated. In the Box of the ChillOut Quantum Pro Cooler Quantum Cooler Pro Carbon Fiber Mounting Plate Wiring Harness Locking Ball Pins Priming Tube Cross Compatibility The Chillout Systems Quantum Cooler Pro is compatible with other brands of cooling shirts that use 1/4" tubing. You will need to purchase the Chillout Systems Dual Prong Adapter and Insulated Hose in order to connect to non-Chillout shirts.

Chillout Remote Control For AirCon Helmet Cooler **Designed for the AirCon Helmet Cooler System only** Featuring a 10-foot cord and color digital display, this dash-mountable Chillout Remote Control is designed to turn your AirCon Helmet Cooler on and off as well as adjust the temperature from anywhere in your vehicle. This is a must-have addition if you're mounting your Chillout AirCon System in an out-of-reach area of your vehicle like the trunk or rear seat area. CHILLOUT REMOTE CONTROL (AIRCON) DETAILS Manufacturer: Chillout Systems Manufacturer part no.: CO-RCAC1 Weight: 5 oz. Dimensions: 2.5"L x 1.5"W x 0.5"H Cord length: 10 feet REMOTE CONTROL INCLUDES Remote control unit 10 foot cord