
Longacre
Longacre Deluxe 2.5" 0-40 psi Tire Gauge
$74.99
Longacre Deluxe Tire Gauge - 2.5" - 0-40 psi by 1/2 LB
The Longacre Deluxe 2.5" Tire Gauge 0-40 psi by 1/2 lb keeps the highest value race cars at the front of the pack. The Longacre Deluxe 52-52013 is a large faced, 2.5" glow in the dark tire gauge with 1/2 lb accuracy and is a track side favorite with many teams from ChampCar to IMSA.
Longacre 0-40 psi Deluxe Gauge Features:
Manufacturer: Longacre
Manufacturer part number: 52013
Gauge Face Size: 2 1/2"
Pressure Range: 0 - 40 psi
Dial Increments: 1/2 lb
Accuracy: 2%
Bleed off: Yes
Holds Pressure: Yes
Includes both angle and ball chucks: Yes
Hose Length: 17"
Internal damper: Yes

SpeedCom Communications
Speedcom Single Ear Headset
$79.95
SPEEDCOM SCC-SEIH single ear intercom headset connects to all SPEEDCOM intercom units and features a built-in IMSA (4C) male connector for simple, reliable driver to passenger communications.
Earpiece speaker details:
The actual speaker portion of the SPEEDCOM SEIH Single Ear Intercom Headset is quite small. Measuring approximately 3.5 cm diameter, the thickness is 2 cm microphone and pillow pad. The pillow pad compresses easily and has the right amount of "give" for comfort.
Earpiece flex boom microphone:
Attached to the speaker is a flex boom noise cancelling microphone. The flex portion of the boom is 14 cm long and the mini microphone adds 4 cm, making it 18 cm long total for full reach around anyone's face to their mouth. The compact size works in every helmet we tried on.
Earpiece wiring harness:
Why do students pull the earpiece out by the wires? That is the question for the ages. SPEEDCOM changes how headsets are built by making the harness with a built-in molded plug. Other brands use the compression of the two speaker piece halves to hold the wire, but SPEEDCOM uses a wire that has the security block built into the harness during the manufacturing stage. Is this a more expensive way to build a headset? Certainly. Is it the better way to build a headset? Defiantly. Using the most popular form of racing protocols, IMSA, the lead is 3 ft and 19.5" long and a perfect length for either a dash mounted unit or shoved between the seat of a D.E. car, or in the instructors hand.
SPEEDCOM Single Ear Headset Details:
Manufacturer: SPEEDCOM
Manufacturer part number: SCC-SEIH
Flexboom length: 18 cm
Wiring harness length: 3 ft & 19.5 in
Wiring harness protocol: IMSA male

SpeedCom Communications
Speedcom Two Person Intercom
$129.95
SPEEDCOM 2MPI driver coaching intercom brings features from $300+ intercom systems and offers simple, rugged and reliable driver to passenger communications.
SPEEDCOM Two Person Intercom Details:
Manufacturer: SPEEDCOM
Manufacturer part number: SCC-2MPI
Power source 1: 4 AA Batteries
Power source 2: 12V DC vehicle power cable with cigarette lighter adapter
Can be dual powered: Yes
Independent volume control: Yes
Helmet connection 1: IMSA female
Helmet connection 2: IMSA female
Headsets Sold Separately HERE
Power Source:
Actually the SpeedCom SCC-2MPI has two independent power sources. For the instructor going from car to car, the 4 internal AA batteries provides multiple weekends of power. For a driver who mounts the SCC-2MPI in their car a 12V DC flying lead (open wires) can power the intercom anytime vehicle power is available.
Mounting:
A incredible simple and secure roll bar "V" notch is built into this communicator. Just add 2 worm drive clamps, and you are secured beyond anything we hope you do to your car, even Rally racers.
Helmet Connections:
Built in are dual IMSA protocol (4C) female connectors on a lead. These dual IMSA cables are built in and ready to connect to your Roux integrated electronics or any other helmet with an IMSA helmet kit. If your helmet is not wired, simply add 2 SpeedCom SCC-SEIH Single Ear Intercom Headsets. This device requires headsets sold separately here.
Volume Control:
Dual independent volume controls are mounted on the front for easy control. The driver knob on the left has the main power control built in elemenating the need for a secondary master power switch. Clean, simple, powerful sound control.
Size:
The SCC-2MPI is compact and rugged. The main unit is 9 cm wide and the roll bar mount ears are 2.5 cm longer on each side.
Cable Lengths:
If you have ever had to purchase a race car electronics extension cable, you know how frustrating that is. Why did an engineer who makes a product think a 3" lead is what a racer wants. 12V DC Power Lead: 4 ft 3 in
Helmet Connections: 7 ft 2 in

Longacre
Longacre Standard 2" Tire Gauge 0-60 by 1 lb
$36.99
Longacre Standard 2" Tire Gauge 0-60 by 1 lb
The Longacre Standard 2" Glow In The Dark Tire Gauge 0-60 by 1 lb is a track side favorite, Small and compact to fits in most glove boxes, but still give accurate readings in all light conditions.
Longacre Standard 2" Tire Gauge 0-60 by 1 lb Details:
Manufacturer: Longacre Racing
Manufacturer Part Number: 52004
Air pressure release button: Yes, qty one
Internal gauge damper for more accurate readings and longer life
Flexible 14" hose with angle chuck installed - also includes ball chuck
2" Glow-In-The-Dark dial face
Quick Compare
Part Number:
52004
52003
53006
Style:
Analog
Analog
Digital
Range:
0-60 psi
0-60 psi
0-60 psi
Size:
2"
2 1/2"
2"
Increments:
1 lb
1/2 lb
.2 lb
Accuracy:
1 lb / 2% mid
1 lb / 2%
.6 lb / 1%
Hose Length:
14"
17"
14"
Chuck:
Angle & ball
Angle & ball
Angle & ball
Holds Pressure:
No
Yes
No
GID / Backlight:
GID
GID
None
[img-1739-left-large_default]

Racing Radios
Racing Radio Foam Earbuds
$95.00
Racing Radio Foam Ear Buds - Universal
Foam Driver Earpieces By Racing Radios. Designed with Ultra High Noise Transducers. Plugs directly into Driver Helmet with 3.5mm jack and has a 19" wiring lead. This is the industry standard foam earpiece used by Racing Radios for over 30 years.
Racing Radio Foam Ear Buds Details:
Manufacturer: Racing Radios
Manufacturer part number: CE31/A-FOAMS
Helmet connection: Universal 3.5mm
Foam Tipped: Yes
Wiring Length: 19"
Entry level or Pro: Pro
If we look closer at a Racing Radios earpiece, we notice there are quite a few differences. First, the outer foam piece is softer and closer to a smooth/soft material than the harder foam material used by lesser manufacturers. After a year of racing the foam was still soft, but starting to look pretty nasty, so upon trying to remove the foam I noticed that there is a micro drop of glue on the end of the wire to transducer that locked it to the foam earpiece. To remove the foam, I used a new razor blade and cut the foam like a banana and peeled the old foam out of the way. There I could inspect the perfect micro soldering on what is one of the words smallest (transducers) speaker not used for Top Secret surveillance. To install the new foam covers, I use a pair of tweezers to stretch the hole open for 30 seconds and before the hole closes I slide the mini-transducer into the new foam, keeping the end of the sound tube barely covered by the end of the foam. I put a 1/2 a drop of super glue on the wire to foam area and I am done.
Racing Radios is considered the go to for Professional Teams of all series and their quality is second to none. Racing Radios foam earpieces are not the cheapest on the web, but they are the best on the web. Trust Racing Radios for the best in race car driver communication.

Longacre
Longacre 17" Replacement Mirror
$52.99
Longacre 17" Replacement Mirror
Longacre Wide Angle 17" Racecar Replacement Rear View Mirror. Now you can easily see not just behind you, but in the hidden spots even with your quarter panel in the deepest of brake zones.
LONGACRE 17" MIRROR DETAILS:
Manufacturer: Longacre
Manufacturer Part Number: 22547
Style: Panoramic / Convex
Size: 17"
Housing: Aluminum/ABS Plastic
For a bigger and better field of rear vision, replace your factory rear view mirror with one of these 17" Panoramic mirrors from Longacre Racing. These mirrors are also a direct replacements for those in Longacre Racing's mirror kits.
[img-2024-left-large_default]

Longacre
Longacre 14" Replacement Mirror
$43.99
Longacre 14" Replacement Mirror
For a bigger and better field of rear vision, replace your factory rear view mirror with one of these 14" Panoramic mirrors from Longacre Racing.
These mirrors are direct replacements for those in Longacre Racing's mirror kits.
Longacre 14" Mirror Details:
Manufacturer: Longacre
Manufacturer part number: 22544
Housing Material: ABS Impact Plastic
Mirror Material: Optically correct convex (panoramic)
[img-2023-left-large_default]

RaceQuip
RaceQuip Adjustable Window Net Straps
$44.95
RaceQuip Adjustable Window Net Straps
These Racequip bottom bar strap on window net mount kits are designed to hold the window net bottom bar in place. They include six, 1.5 in. nylon straps and six 3-bar heavy duty drop forged slides that are adjustable from 8 to 18 in. lengths. The straps can follow the contour of an angled door bar.
RaceQuip Adjustable Window Net Strap Details:
Manufacturer: Racequip
Manufacturer part number: 705005
Color: Black
Qty in kit: 6

Longacre
Longacre Tire Marking Pen 50882
$11.99
Longacre Tire Marking Pen 50882
Longacre Tire Marking Pen To Mark Your Race Tires With Position or Number Of Runs.
Longacre Tire Marking Pen Details:
Makes a finer line, easy to read
Mark tire sizes, pressures, etc.
Silver marking won't come off due to heat
Manufacturer: Longacre
Manufacturer Part Number: 50882
Color: Metalized Silver
These markings are not easily removable! If you write on a tire "No Grip - Worst Tire Ever" it will be pretty hard to sell on an internet forum. You have been warned.
[img-1818-left-large_default]

Longacre
Longacre 1 3-4" Helmet Hook
$30.99
Longacre 1 3/4" Helmet Hook
Longacre Helmet Hooks keep your race helmet off the floor and safe from scratches and damage. The Longacre 22570 Helmet Hook fits perfectly on all 1.75" (1 3/4") roll bars and will last many years with its durable anodized finish.
[img-2240-left-large_default]
Longacre 1 3/4" Helmet Hook Details:
Manufacturer: Longacre
Manufacturer Part Number: 22570
Material: CNC Machined Billet Aluminum
Finish: Black anodized
Mount Diameter: 1.75"
Protect your helmet
Bolts onto your roll bar - no welding (choose size above)
Lightweight billet aluminum - black anodized
[img-2240-left-large_default]

Longacre
Longacre Magnum 3" 0-60 psi Tire Gauge
$109.99
Longacre Magnum 3" GID Tire Gauge 0-60 by 1/2 lb
The Longacre Magnum 3" Tire Gauge 0-60psi by 1/2 lb keeps the highest value race cars at the front of the pack.
Longacre Magnum 3" 0-60 psi Tire Gauge Details:
Manufacturer: Longacre
Manufacturer part number: 52001
Huge 3 1/2" Glow-in-the-Dark face for high accuracy and the easiest readability
Dual bleed buttons for faster setting
1/2 lb increments with 2% accuracy
Swivel angle chuck installed with alternate ball chuck included
Holds pressure until released
Internal gauge damper for more consistent, accurate readings
Flexible 17" red hose
Comes with silver case
The Longacre Magnum 52001 is a large faced, 3" glow in the dark tire gauge with 2% accuracy and is a track side favorite with many teams from ChampCar to SRO.

Discovery Parts
Plexus Lexan Cleaner
$29.99
Plexus Lexan Cleaner
Plexus cleaner is formulated to clean and protect clear and colored plastics. Unlike conventional waxes, Plexus cleans as it polishes.
Plexus Lexan Cleaner Details:
Manufacturer: Plexus
Size: 13 oz Can
Aerosol: Yes
UPC: 848238040234
EAN: 0848238040234
Rated #1 in Lexan Care
Plexus actually seals the pores of plastic, making small scratches less visible. Plexus lexan polish and cleaner dries without streaks or smears and is excellent for polycarbonate windows on race cars.

Longacre
Longacre Toe Plates with Magnets
$84.99
Longacre Toe-In Plates with Magnets
The Longacre 52-79501 Toe-In Plates use magnets to hold the far end of the tape measure securely while you read the close-end measurement. Simple and easy to store in the spares kit, Longacre toe plates are a trackside must have. Longacre Toe Plates keep the highest value race cars at the front of the pack. Longacre Toe-In Plates with Magnets (pair) is a track side favorite with many teams from ChampCar to Grand-Am.
Longacre Toe Plates with Magnets Details:
Manufacturer: Longacre Racing
Manufacturer Part Number: 52-79501
Quickest and simplest way to measure toe-in
Rest one of these plates against the tire on each side and measure toe directly using the 2 tapes (included)
Formed design is rigid for accuracy and stays put against the tire
Magnets hold tape in place
Dimensions: 23 1/2" x 9"
[img-5557-left-large_default]
How to use Longacre Toe Plates:
This is a fast way to check / set front end toe. It is affected by wheel or tire runout. Be certain wheels run true and tires have no bulges.
Turn wheels to straight ahead: Should be done on level ground. Set caster & camber first.
Lean plates up against wheels: Folded lip goes to the outside. Be sure the entire plate is up against the wheel.
Measure front width, then rear: Use the slots for the tape measure. Subtract one from the other for toe. Larger front width means toe-out.
[img-2164-left-large_default]

Roux Helmets
Roux R-1F Fiberglass Loaded SA2020 Helmet
$669.00
Roux R-1F Fiberglass SA2020 Helmet
Roux R-1 Fiberglass SA2020 helmet is Roux's entry-level R-1- series helmet featuring a lightweight Fiberglass shell that is Snell SA2020 rated. Despite the value-oriented price, the R-1 fiberglass still comes fully equipped with an integrated drink tube and radio gear, complete with noise-cancelling microphone and speaker pods.
Roux R-1 Fiberglass SA2020 Helmet details:
Manufacturer: Roux
Manufacturer part number: RXHR1F-20F55
Rating: Snell SA2020
Rating: FIA 8859-2010
Matt Black Sizes: Small - 3X-Large
Color: Matte Black
Shell Material: Fiberglass
Hans post anchors included: Yes
Shield on the helmet: Clear
Fit Pads: Not included, only with Composite and Carbon Roux helmets
Integrated radio communications, IMSA on left side (adaptable to others protocols)
Hydration drinking tube on left
Internal Patent pending helmet release system
Cool-X Helmet Cooling: No
Helmet runs small
The Release emergency helmet system allows for the safe removal of the helmet in the event of an accident, preventing spinal or head injuries.
Roux R-1 Fiberglass Electronics:
Included and installed speaker pods and noise-cancelling flex boom microphone, IMSA plug standard on drivers left side. Adapter cables are available to convert to Nascar, Peltor, Chatterbox and more.
Roux R-1 Fiberglass Hydration System:
Included and installed driver hydration system including a dry-break fitting on the drivers right side.
Roux R-1 Fiberglass Emergency Release System:
We have seen many great helmet release systems, but they need to be added after the helmet is built. The Eject System and Stand 21's Lid Lifter have been the most popular (actually Eject Wins by a little), but your Roux R-1 helmet has a built in Emergency Release System, to reduce neck loads upon removal of your helmet if needed.
Roux R-1 Fiberglass SA2020 Helmet sizing chart:

Longacre
Longacre 1 1/2" Helmet Hook
$27.99
Longacre Helmet Hook - 1.5"
Longacre Helmet Hooks keep your race helmet off the floor and safe from scratches and damage. The Longacre 22572 Helmet Hook fits perfectly on all 1.5" (1 1/2") roll bars and will last many years with its durable anodized finish.
[img-2241-left-large_default]
Longacre 1 1/2" Helmet Hook Details:
Manufacturer: Longacre
Manufacturer Part Number: 22572
Material: CNC Machined Billet Aluminum
Finished: Black anodized
Mount Diameter: 1.5" Protect your helmet
Bolts onto your roll bar - no welding
Lightweight billet aluminum - black anodized