all

Alpinestars ZX EVO v3 Nomex Underlayer Shirt Ready to turn up the heat without breaking a sweat? The Alpinestars ZX EVO V3 Long Sleeve Top is your secret weapon for staying cool, comfortable, and fully protected on the track. This isn’t just any racing underlayer; it’s Formula 1-specification, crafted with advanced LENZING™ FR fabric—a sustainably produced, flame-resistant viscose fiber that’s as kind to the planet as it is tough on heat. Slide this on under your suit, and you’ll feel the difference instantly: lightweight, breathable, and incredibly soft, like a second skin that’s ready to tackle even the most intense laps. Alpinestars ZX EVO v3 Fireproof Shirt Features & Benefits Unmatched Flame Resistance: Thanks to LENZING™ FR, this top provides permanent flame resistance and thermal insulation, so you can focus on your line without worrying about heat transfer. Barely-There Comfort: Designed to be ultra-light and seamless, it sits perfectly on your torso, reducing pressure points and giving you full freedom to move. Cool & Dry Performance: With advanced moisture-wicking properties, the ZX EVO V3 draws sweat away from your skin, keeping you cooler and fresher, lap after lap. Breathable & Flexible: All-new jacquard mesh with diamond construction provides enhanced stretch and fit, plus top-notch ventilation to keep you in the zone. Imagine slipping into this F1-spec top on a sweltering race day. The soft touch of the LENZING™ FR fabric feels like a cool breeze against your skin, even when the cockpit heats up. And when the race is on, you’ll barely feel it as it fits like a second skin, giving you complete freedom and focus on every turn, every straight. This is performance and comfort engineered for champions. Alpinestars ZX EVO v3 Fireproof Shirt Product Specifications Material: LENZING™ FR cellulosic fiber for flame resistance and thermal insulation Weight: 255g/sqm – designed to keep weight minimal while maximizing comfort Construction: Lightweight, seamless tubular torso with reduced collar seams Fit: Improved stretch fit with breathability and moisture-wicking properties Certifications: FIA 8856-2018 & SFI 3.3 homologated Alpinestars ZX EVO v3 Fireproof Shirt FAQs Is the ZX EVO V3 approved for competitive racing?Yes! It’s certified to both FIA 8856-2018 and SFI 3.3 standards, so you’re good to go for professional racing events. Does the top run true to size?Alpinestars designed the ZX EVO V3 with a revised pattern that offers a snug, optimized fit. If you’re between sizes, consider sizing up for a perfect feel. How does it compare to regular racing tops?With its Formula 1 pedigree, the ZX EVO V3 is leagues ahead in terms of comfort, breathability, and flame resistance, thanks to the LENZING™ FR material. So, are you ready to race with confidence, style, and the ultimate protection? Hit that checkout button and let the ZX EVO V3 take your driving comfort and safety to the next level

HANS Sport 2 Tether Kits Replace the tether kit on your HANS Sport 2 if you're involved in an incident, or swap out your existing tether for a longer or shorter one. For use with Sliding tethers and post anchors only.

Sparco Sprint Driver Race Suit The Sparco Sprint Driver Race Suit is the latest evolution of Sparco’s legendary Sprint suit, redesigned with meaningful upgrades for improved comfort, protection, and value. Long trusted by drivers for dependable fire protection and classic Sparco styling, the updated Sprint brings a lighter and more breathable 2-layer aramid construction to one of the most popular entry-level racing suits in motorsports. Designed for drivers who need certified safety without sacrificing mobility, the Sparco Sprint features pre-curved arms, full-floating sleeves, ultra-soft knit cuffs, and multiple stretch panels throughout the suit. These updates help improve flexibility in the car while reducing restriction around the shoulders, arms, and waist. The Sprint is built with clean mono-color styling and subtle contrasting accents, giving drivers a professional look that works across club racing, HPDE, endurance racing, and competition use. Available in both standard cuff and boot cuff options, the Sparco Sprint Driver Race Suit delivers strong safety, comfort, and value for racers building a complete driver gear setup. Sparco Sprint Driver Race Suit Details 2-Layer Aramid Construction: Lighter and more breathable than the previous Sprint design while maintaining dependable fire protection. Full-Floating Sleeves: Allows better arm movement and reduces restriction while driving. Pre-Curved Arms: Designed around the natural seated driving position for improved comfort behind the wheel. Ultra-Soft Knit Cuffs: Soft arm and leg cuffs provide comfort and help keep the suit positioned correctly. Multiple Stretch Panels: Stretch zones improve mobility, breathability, and overall fit. Classic Mono-Color Styling: Clean single-color suit design with subtle contrasting shades for a professional race-ready look. Standard or Boot Cuff Options: Available in traditional standard cuff or boot cuff configurations depending on driver preference. Safety Approved: SFI 3.2A/5 and FIA approved for competition use. Sparco Sprint Race Suit Technology Full-floating sleeves for improved driving mobility. Pre-curved arms for reduced bunching in the cockpit. Ultra-soft knit cuffs for added comfort. Multiple stretch panels for flexibility and better fit. Lightweight 2-layer aramid construction. Available in standard cuff or boot cuff versions. SFI 3.2A/5 and FIA approved. Sparco Sprint Driver Race Suit Sizing Chart  Why Choose the Sparco Sprint Driver Race Suit? The Sparco Sprint Driver Race Suit is ideal for racers who want proven Sparco protection, a comfortable fit, and excellent value. Its lightweight 2-layer construction, floating sleeves, pre-curved arms, and stretch panels make it easier to move naturally in the car while still providing certified fire protection for competition use. Whether you are building your first complete racewear setup or replacing older driver gear, the Sparco Sprint remains one of the best-value racing suits for drivers who need real safety, comfort, and classic Sparco style.

Bell K1 Sport Racing Helmet – Snell SA2025 Certified The Bell K1 Sport Racing Helmet SA2025 delivers the protection, ventilation, comfort, and versatility drivers expect from Bell Racing in an affordable, competition-ready full-face helmet. Designed for entry-level racers, club racing competitors, track-day enthusiasts, and experienced drivers looking for dependable motorsport equipment, the K1 Sport combines a lightweight composite shell, advanced multi-density impact liner, and an efficient ventilation system inspired by Bell's premium racing helmets. Certified to Snell SA2025, the Bell K1 Sport provides current-generation automotive racing helmet protection for motorsport applications that accept this certification. With direct-flow chin bar ventilation, forehead and top intake vents, RS7-compatible upper ventilation accessories, M6 head-and-neck restraint mounting provisions, and a synthetic rubber eyeport gasket, the K1 Sport offers outstanding functionality at an accessible price point. Whether you're preparing for your first track day, competing in SCCA or NASA club racing, or upgrading your existing motorsport equipment, the Bell K1 Sport SA2025 provides a versatile foundation for serious driving. Bell K1 Sport SA2025 Helmet Key Features Snell SA2025 Certified: Meets the current Snell automotive racing helmet safety standard. Lightweight Composite Shell: Durable composite construction designed for impact protection and comfort. Advanced Multi-Density Impact Liner: Multi-piece energy-absorbing construction helps manage impact forces. Superior Ventilation: Direct-flow chin bar, forehead, and top intake vents promote cooling airflow. RS7-Compatible Top Ventilation: Uses the same upper air intake pattern as Bell RS7 models for compatible accessory installation. Optional Forced-Air Cooling: Compatible top-air attachments are available for use with external helmet cooling systems. Optional Aerodynamic Accessories: Compatible rear spoilers, top gurneys, and chin bar gurneys are available separately. Synthetic Rubber Eyeport Gasket: Helps reduce dirt, dust, and water entering around the shield. Bell 287 SRV Shield System: Compatible with Bell 287 SRV replacement shields and SRV-1 pivot hardware. Compatible Tear-Off Films: Supports selected Racing Optics and Bell-compatible tear-off systems. M6 FHR Mounting Terminals: Factory-installed threaded mounting provisions accept compatible head-and-neck restraint anchors. Fire-Resistant Interior: Dark Grey high-strength, high-comfort FR fabric. Multiple Interior Color Options: Selected alternative interior colors are available by special configuration. Full-Face Racing Design: Designed for circuit racing, autocross, HPDE, and other automotive motorsport events. Excellent Entry-Level Value: Professional racing helmet features at a competitive price. Snell SA2025 Certified Racing Protection The Bell K1 Sport is certified to Snell SA2025, the current Snell standard for automotive racing helmets. This certification establishes performance requirements for motorsport helmets, including impact protection and other safety characteristics appropriate for automotive competition. The K1 Sport is designed for racers participating in track days, time trials, autocross, and club racing where Snell SA2025 helmets are accepted. Its modern certification makes the K1 Sport a practical choice for drivers upgrading from older SA2015 or SA2020 equipment. Certification Note: The K1 Sport SA2025 is listed with Snell certification. FIA 8859 homologation is not specified for this model. Always verify your sanctioning organization's helmet requirements before competing. Lightweight Composite Shell Construction The Bell K1 Sport features a lightweight composite shell designed to balance structural strength, impact protection, and overall driver comfort. The shell works together with an advanced multi-density, multi-piece impact liner to help absorb and manage energy during a racing incident. This construction provides dependable protection without the higher cost associated with specialized carbon fiber racing helmets. For drivers participating in longer track sessions, the helmet's combination of protective materials and comfortable fit helps support reduced fatigue and improved concentration. Advanced Multi-Density Impact Liner Inside the Bell K1 Sport is an advanced multi-density, multi-piece energy-absorbing liner. The liner is engineered to manage impact forces and support the protective performance required for Snell SA2025 certification. Combined with a properly fitted comfort interior and secure chin strap, the impact liner is a critical component of the helmet's safety system. Always select the correct helmet size and follow Bell Racing's fit recommendations to ensure the helmet remains securely positioned during competition. Superior Ventilation With Direct-Flow Cooling The Bell K1 Sport features an advanced ventilation arrangement designed to improve airflow during demanding driving conditions. Direct-flow chin bar vents introduce airflow into the front of the helmet, while forehead and upper intake vents provide additional ventilation. This system helps improve driver comfort during extended track sessions, particularly in warm-weather racing environments. The K1 Sport also supports selected optional air intake accessories for drivers who require additional ventilation or compatibility with an external forced-air system. RS7-Compatible Top Air Intake System One of the most useful features of the Bell K1 Sport is its compatibility with selected Bell RS7 upper ventilation accessories. The K1 Sport incorporates the same top air intake vent pattern used on Bell RS7 racing helmets. This allows compatible RS7 air intake vent kits and top forced-air attachment kits to be installed on the K1 Sport. Drivers can configure the helmet for additional cooling depending on their vehicle, seating position, and motorsport application. Optional top-air components can also be connected to compatible external air systems using the appropriate hoses and accessories. Important: Optional forced-air attachments, cooling blowers, air hoses, and related components are sold separately. Optional Aerodynamic Accessories The Bell K1 Sport can be equipped with compatible aerodynamic accessories to suit different racing applications. Available optional components include: Rear racing spoilers Top gurney aerodynamic accessories Chin bar gurneys Upper air intake attachments Top forced-air ventilation kits These accessories allow drivers to tailor the helmet's airflow and aerodynamic configuration based on their racing environment. Always confirm the specific accessory is compatible with the K1 Sport SA2025 before installation. Bell 287 SRV Shield and SRV-1 Pivot System The Bell K1 Sport uses the Bell 287 SRV shield system with compatible SRV-1 pivot hardware. This shield platform provides a secure visor arrangement designed for motorsport driving while offering convenient access to replacement components. Genuine Bell 287 SRV shields are available separately in selected configurations and finishes. The shield system also supports compatible tear-off film accessories, allowing drivers to remove dirt, rubber debris, and other contaminants from the outer shield surface during racing. Use only compatible shields, tear-offs, and pivot hardware designed for the K1 Sport. Synthetic Rubber Eyeport Gasket The Bell K1 Sport features a synthetic rubber gasket around the visor opening. This gasket helps create a seal between the shield and helmet shell when the visor is properly closed. Its purpose is to reduce unwanted entry of dirt, dust, and water during changing racing conditions. The gasket also contributes to the helmet's finished appearance and shield fit. Inspect the gasket regularly for wear, damage, or deterioration. Factory-Installed M6 FHR Mounting Terminals The Bell K1 Sport includes factory-installed M6 threaded mounting terminals designed to accept compatible frontal head restraint anchors. These mounting provisions allow drivers to install approved HANS/FHR hardware without modifying the protective helmet shell. Head-and-neck restraint compatibility is particularly important for club racing and sanctioned motorsport events that require approved frontal head restraint equipment. Important: The M6 mounting terminals are included, but HANS/FHR anchor clips are sold separately. Always follow the anchor manufacturer's installation instructions and verify compatibility with your specific restraint system. Comfortable Fire-Resistant Interior The Bell K1 Sport comes standard with a Dark Grey high-strength, high-comfort fire-resistant interior. The interior is designed to provide consistent contact and comfort during extended driving sessions. Bell also offers selected alternative interior colors for drivers seeking a more personalized helmet configuration. Available interior color options include Tan, White, Red, Purple, Blue, Green, Neon Yellow, Pink, and Orange. Alternative interior colors may require special ordering and are subject to manufacturer availability. Ideal for Track Days, Club Racing, and Entry-Level Motorsport The Bell K1 Sport is designed for drivers seeking dependable racing helmet performance without unnecessary complexity or premium carbon fiber pricing. Its versatile construction and certification make it an excellent choice for a variety of automotive racing activities. HPDE and High-Performance Driving Events Road Racing Club Racing Autocross Time Trials Track-Day Events Driving Schools Performance Driving Whether purchasing your first racing helmet or replacing an older model, the K1 Sport provides a balance of quality, comfort, ventilation, and motorsport protection. Bell K1 Sport SA2025 Technical Specifications Manufacturer: Bell Racing Helmets Model: K1 Sport Helmet Series: Bell Sport Series Helmet Type: Full-Face Auto Racing Helmet Certification: Snell SA2025 Shell Construction: Lightweight Composite Impact Liner: Advanced Multi-Density, Multi-Piece Exterior Colors: Black and White Standard Interior: Dark Grey High-Strength, High-Comfort FR Fabric Alternative Interior Colors: Tan, White, Red, Purple, Blue, Green, Neon Yellow, Pink, and Orange Ventilation: Direct-Flow Chin Bar, Forehead, and Top Vents RS7 Top Air Accessory Compatibility: Yes Optional Forced-Air Attachments: Available Separately Optional Rear Spoiler: Available Separately Optional Top Gurney: Available Separately Optional Chin Bar Gurneys: Available Separately Shield: Bell 287 SRV Pivot Kit: SRV-1 Tear-Off Compatible: Yes Eyeport Gasket: Synthetic Rubber FHR Mounting: Factory-Installed M6 Threaded Terminals HANS/FHR Anchor Clips: Sold Separately Manufacturer Size Ranges: 54-55, 55-56, 57-58, 58-59, 60-61, 61-61+ Primary Applications: Road Racing, HPDE, Club Racing, Time Trials, Autocross, and Track Days Quantity: Sold Individually Bell K1 Sport SA2025 Helmet Sizing Chart  Compatible Bell K1 Sport Helmet Accessories The Bell K1 Sport SA2025 supports a variety of Bell Racing accessories for visibility, cooling, comfort, and motorsport use. Bell 287 SRV Replacement Helmet Shields Bell SRV-1 Shield Pivot Hardware Racing Optics 287 SRV Tear-Off Films Compatible Bell Rear Racing Spoilers Bell RS7-Compatible Top Air Intake Kits Compatible Forced-Air Helmet Attachments Selected Top and Chin Bar Gurneys Compatible HANS/FHR Anchor Clip Sets Protective Helmet Storage and Transport Bags Always confirm accessory compatibility with the Bell K1 Sport SA2025 model before ordering. Bell K1 Sport Helmet Care and Maintenance Proper cleaning, inspection, and storage help maintain the performance, comfort, and appearance of your Bell K1 Sport racing helmet. Exterior Care: Bell racing helmets feature a durable polyurethane exterior coating designed to resist scratching. Clean the helmet using a soft microfiber cloth and high-quality products suitable for automotive finishes. Never use abrasive or solvent-based cleaners. Interior Care: Use mild soap and water with a clean cloth to gently hand-clean the interior comfort padding. Avoid saturating the impact liner or using aggressive cleaning chemicals. Drying: If the interior becomes wet from perspiration or moisture, allow the helmet to dry completely before storage. Shield Care: Clean the visor using appropriate non-abrasive shield cleaning products. Inspect for scratches, cracks, or damaged pivot hardware. Ventilation Maintenance: Keep chin bar, forehead, and top air openings clear of dirt and debris. Hardware Inspection: Check the chin strap, shield hardware, and installed FHR anchor components before each driving event. Storage: Store the helmet in a clean, dry environment away from direct sunlight, excessive heat, chemicals, and solvents. Bell K1 Sport SA2025 Helmet FAQs Is the Bell K1 Sport Snell SA2025 certified? Yes. The current Bell K1 Sport carries Snell SA2025 certification for applicable automotive motorsport activities. Is the K1 Sport FIA 8859 certified? Bell lists the K1 Sport SA2025 with Snell certification. FIA 8859 homologation is not specified for this model. Is the Bell K1 Sport good for first-time racers? Yes. The K1 Sport is designed for entry-level racers, club racing competitors, and hobbyist drivers who want a high-quality, race-ready helmet at an accessible price. What is the K1 Sport shell made from? It features a lightweight composite shell designed for durability, impact performance, and comfort. Does the K1 Sport have good ventilation? Yes. The helmet features direct-flow chin bar vents, forehead vents, and upper ventilation openings. Can I install a forced-air cooling system? Yes. The K1 Sport supports compatible optional forced-air attachments for use with external cooling systems. Are Bell RS7 top air kits compatible? The K1 Sport uses the same top vent pattern as the RS7, allowing compatible RS7 air intake and top forced-air accessories to be installed. Does the Bell K1 Sport include HANS anchors? The helmet includes factory-installed M6 threaded FHR mounting terminals. Compatible HANS/FHR anchor clips are sold separately. What shield fits the Bell K1 Sport SA2025? The helmet uses the Bell 287 SRV shield system and compatible SRV-1 pivot hardware. Can I use tear-offs on the K1 Sport? Yes. Compatible Racing Optics tear-off films are available for the 287 SRV shield. Can I add a rear spoiler? Yes. Compatible Bell rear spoilers are available separately. What interior color comes standard? The standard interior is Dark Grey high-strength, high-comfort fire-resistant fabric. Are other interior colors available? Bell offers selected alternative interior colors including Tan, White, Red, Purple, Blue, Green, Neon Yellow, Pink, and Orange, subject to availability. What sizes are available? The Bell K1 Sport SA2025 is offered in manufacturer size ranges of 54-55, 55-56, 57-58, 58-59, 60-61, and 61-61+. What colors are available? The current K1 Sport SA2025 is offered in Black and White. Is the Bell K1 Sport suitable for HPDE and track days? Yes. It is designed for HPDE, driving schools, time trials, and track-day applications where its Snell SA2025 certification is accepted. What is the difference between the K1 Sport SA2020 and SA2025? The SA2025 model meets the newer Snell automotive racing helmet certification standard. Always confirm the certification of the specific helmet being purchased. How should I clean the interior? Bell recommends gently hand-cleaning the interior fit padding with mild soap and water using a clean cloth. Allow the helmet to dry completely before storing. Affordable Racing Performance With the Bell K1 Sport SA2025 The Bell K1 Sport Racing Helmet SA2025 delivers dependable motorsport protection, modern styling, effective ventilation, and excellent accessory compatibility at an attractive price point. With its lightweight composite shell, advanced impact liner, RS7-compatible ventilation system, Bell 287 SRV shield, and M6 FHR mounting terminals, the K1 Sport is an outstanding choice for drivers starting their motorsport journey or upgrading to the latest Snell standard. Choose the Bell K1 Sport SA2025 for trusted Bell Racing quality, versatile performance, and race-ready protection every time you head to the track.Add a Discovery Parts Professional Racing Helmet Bag to your order and keep your new Bell Racing BR8 helmet safe and secure throughout each race weekend.

PFC Brake Pads 0635.97.13.44 (97 Compound) A favorite since its debut, Performance Friction 97-Compound Racing Braking Pads continue to impress, winning numerous races in CART, ALMS, Grand Am, ASA, and Club Races everywhere. The 97-Compound has less initial bite and torque then the 01, while offering great modulation, a very flat torque curve, and excellent release characteristics. A naturally low-wearing pad, the 97 compound is popular in the endurance circuits and amongst Club Racers and Track-Day enthusiasts. PFC Brake Pads 0635.08.13.44 (08 Compound) One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. PFC Brake Pads 0635.11.13.44 (11 Compound) Based on the out-going 01-compound, Performance Friction's 11-compound takes the same great high-bite and torque but with even better rotor and pad wear characteristics and improved bite, modulation, and release. Exhibiting a very high initial bite and torque, very little temperature induced torque rise follows. Less torque scatter exists for improved modulation with excellent release, helping to eliminate wheel lock at the end of a stop. Fits Mazda Miata (94-05), Front

Trac-Com V4 Instructor Intercom System   What’s different about this version? The V4 is an entirely new design, offering improved functionality in a more streamlined package. We have even included a lanyard to hang it around your neck without holding it.  Volume levels and sound quality have been dramatically increased, making it easier than ever to hear in loud environments. Individual volume inputs can now be adjusted using glove-sized low-profile textured buttons on the front of the device.  The V4 also incorporates a low-power backlit LCD screen that displays each user's volume and the device's battery status.  Speaking of batteries, we’ve completely rethought how the Trac-Com V4 is powered. For the first time, we’re incorporating a Dual Battery System with a built-in Li-Ion rechargeable battery and a compartment for a removable 9V battery. The lightweight internal battery can be used exclusively to power the V4, providing several hours of use and reducing operating costs.  Don’t have time to charge it? Insert a 9V battery, and you’ll add hours of use and never be without power again. If a 9V battery is installed in a fully charged (internal battery) Trac-Com V4, the device will favor the removable 9V, reserving the internal battery for later use.  Although the device is entirely new, we haven’t forgotten about our longtime Trac-Com users. The Trac-Com V4 uses the same 5-pin headset connectors customers have relied on for years, making this new version fully backward compatible with previous headsets and adapter cables.  The Trac-Com Dual Intercom System is the ultimate solution for driver-passenger communication. This state-of-the-art intercom system, created by RaceCom, offers superior sound and reliability in a flexible package. RaceCom has been providing top-quality racing communication solutions since 1995, making them a trusted name in the industry.Say goodbye to years of frustration with other in-helmet intercom systems, and experience the convenience and quality of Trac-Com. Designed and manufactured in the USA, Trac-Com is the premier choice for racing intercoms and driver/passenger communication. With its adaptable design, it can be used in a variety of applications. The Trac-Com Dual Intercom System includes one R TC INTERCOMV4 base unit, one R TC HS BOOMV2 boom mic/speaker headset, plus the necessary cable and headset for your helmet.  Say goodbye to years of frustration with inferior in-helmet intercom systems, and experience the convenience, quality, and reliability of Trac-Com. Don't settle for subpar communication on the track or on the road - upgrade to Trac-Com and experience the difference for yourself. Trac-Com Instructor Intercom System Includes: (1) Trac-Com Intercom Base Unit V4 (R TC TRACCOM V4) (1) Trac-Com boom mics (R TC HS BOOMV2) (1) Trac-Com Helmet kit V2 (R TC HK-IMSA) (1) Trac-Com Adapter - IMSA Female Adapter (R TC IMSA) (1) internal battery (1) tether

AiM 90 22 Pin Auxiliary Harness for MXP, MXG, MXS & MXL2 Dashes 90 This 90 harness plugs into the 22-pin connector on either the AiM MXP, MXL2, MXM, MXG, MXS dash, and AiM EVO5 Logger. Several of the advanced functions rely on this harness, which is not included with the standard kit. AiM 22 Pin Auxiliary Harness for MXP, MXG, MXS, MXL2 Dashes Details: Manufacturer: AiM Manufacturer part number: V02573020 Alternate part number: MC-249 Harness Angle: 90 The AiM 22 Pin Auxiliary Harness will provide access to the following functions: Analog sensor channels 5, 6, 7, 8 Digital wheel speed sensor inputs 2, 3, 4 Digital 12v outputs 1, 2 RS232 ECU connection The factory harness that comes with the AiM MXG, MXS, MXL2 allows only 4 inputs. If you would like more inputs then this is your harnessFor use with AiM MXS, MXP, MXL2, MXG, and EVO5 Dash/Loggers. Not compatible with older AiM MXL Pro / MXL Pro05 or AiM EVO series. AiM 22 Pin Auxiliary Harness for MXP, MXG, MXS, MXL2 Dashes Primary use: Adding analog sensors greater than 4. Your factory harness will allow up to 4 analog channels (sensors), this may be (1) Water Temperature, (2) Oil Temperature, (3) Oil Pressure and (4) Brake Pressure. Using the AiM 22 Pin Auxiliary harness you now can add four more analog channels (sensors) like (5) Steering Angle, (6) Throttle Position, (7) Gear Box Temperature, and (8) Differential Temp. Another way we see this cable used is independent shock travel (all corners) or engine oil temperature pre-cooler and oil temperature post-cooler.

Paragon Everest Helmet Cooling Insert The Paragon Everest Helmet Cooling Insert is designed specifically to cool your head while you're wearing a racing helmet, and it works in concert with any other Paragon cooling garments. The Paragon Everest Helmet Insert requires replacement after each racing season due the material qualities that provide its extremely light weight and flexibility. The Paragon Everest Helmet Cooling Insert is designed for optimum performance and cooling efficiency under the harshest, hottest racing conditions. Pair It With A Paragon Cooling System The Paragon Everest Helmet Cooling Insert can be used on its own, but it is especially effective when paired with Paragon Cooling Water Shirt and a Viking System or Arctic Bag System (each sold separately). Using a Paragon Guardian Y-Hose, this allows you to circulate ice-chilled water over the wearer's head and torso, keeping you comfortable and focused especially during those hot, late laps when heat fatigue can easily set in. Paragon Everest Helmet Cooling Insert Details Manufacturer: Paragon Sizes: one size Weight: 1 lb. Dimensions in inches: 12 x 5 x 1

Sparco Ice Vest Stay cool, focused, and ready to conquer the track with the Sparco Ice Vest. Engineered to provide exceptional cooling before and after races, this revolutionary gear is a game-changer for auto racing enthusiasts who prioritize performance and comfort.The Sparco Ice Vest combines advanced cooling technology with a lightweight and ergonomic design, making it the ultimate choice for drivers seeking optimal temperature regulation in high-intensity racing environments.  The Sparco Ice Vest was originally developed for Sparco’s professional drivers in Formula 1 and INDY Car. The Ice Vest is designed to be used before and after racing. Cooling the body core temperature before driving has proven to help driver performance. The Ice Vest uses eight reusable medical grade ice packs placed strategically in the vest. The Ice Vest has internal mesh pockets for maximum cold transfer and a waterproof membrane. The medical ice packs are non-allergenic and reusable.Introducing the Sparco Ice Vest: Unmatched Driver Cooling for Peak Performance SPARCO ICE VEST FEATURES Advanced Cooling Technology: The Sparco Ice Vest harnesses state-of-the-art cooling technology to rapidly lower body temperature, ensuring maximum comfort and peak performance. Engineered to combat heat and humidity, this vest guarantees an unbeatable cooling experience.2. Pre and Post-Race Comfort: Designed with the needs of drivers in mind, the Sparco Ice Vest is specifically tailored to provide exceptional cooling both before and after races. Before the race, it helps lower body temperature, preparing you for optimal performance. After the race, it aids in reducing post-exertion heat, promoting faster recovery.3. Lightweight and Ergonomic Design: Weighing just a few ounces, the Sparco Ice Vest is incredibly lightweight and non-restrictive. Its ergonomic design contours to your body, ensuring a snug fit without hindering your movements. Experience unparalleled freedom and flexibility on the track.4. Easy to Use: The Sparco Ice Vest is designed for hassle-free use. Simply activate the cooling technology by submerging the vest in cold water for a few minutes. Once activated, the vest will provide long-lasting cooling relief, allowing you to focus solely on your performance.5. Durable and Reliable: Crafted with the highest quality materials, the Sparco Ice Vest is built to withstand the demands of auto racing. Its rugged construction ensures durability, while reinforced stitching guarantees long-lasting performance, race after race.Revolutionize your racing experience with the Sparco Ice Vest, the ultimate cooling gear for auto racing drivers. Whether you're preparing for a race or recovering afterward, this vest provides unbeatable cooling comfort, helping you maintain your competitive edge.Don't let heat compromise your performance. Invest in the Sparco Ice Vest today and experience the difference it can make in your racing performance.Available in X-Small - XXX-Large. SPARCO ICE VEST TECHNOLOGY Maximum body cooling8 Reusable Medical Grade ice packsBreathable mesh lining for maximum cold transferNon-Allergenic and

Sparco Prime-R Racing Shoes The Sparco Prime-R Racing Shoes deliver an ultralight design, responsive pedal feedback, and premium comfort for demanding competitive drivers. Developed for high-level motorsports, the Prime-R weighs approximately 240 grams in size 42, helping reduce unnecessary weight without compromising support or protection. The soft kangaroo leather upper provides a lightweight and flexible fit that moves naturally with the driver’s foot. Strategically placed perforations, a breathable lining, and an ultra-breathable padded tongue help control heat and perspiration during long races and demanding track sessions. A thin rubber outsole with differentiated grip textures provides direct pedal feedback while maintaining dependable traction. The sole is also designed to resist fuel and oil and features optimized stiffness for race cars that require high brake-pedal pressure. Lightweight Kangaroo Leather Construction The Prime-R’s kangaroo leather upper provides an excellent combination of low weight, flexibility, and durability. Fully inkjet-printed graphics reduce the need for heavier decorative materials while creating the shoe’s distinctive professional appearance. Breathable Racing Comfort Perforations throughout the upper promote airflow around the foot. An anti-perspiration breathable lining and padded fabric tongue provide additional comfort during sprint races, endurance events, qualifying sessions, and extended track use. Secure Lace and Ankle Closure Ultralight flat laces provide a close, adjustable fit, while the ultra-grip hook-and-loop ankle strap secures both the laces and ankle. This helps reduce unwanted movement and keeps the closure system safely contained while driving. Responsive Racing Sole The thin rubber sole is engineered to provide excellent pedal sensitivity, allowing the driver to better feel brake pressure, throttle position, and pedal movement. Differentiated grip textures provide traction where it is needed without adding unnecessary bulk. Sparco Prime-R Racing Shoe Features FIA 8856-2018 homologated SFI 3.3/5 homologated Approximately 240 grams in size 42 Soft and lightweight kangaroo leather upper Fully inkjet-printed graphics for reduced weight Perforated upper for improved breathability High abrasion-resistant leather inserts Ultralight flat racing laces Ultra-grip hook-and-loop ankle strap Strap helps secure the ankle and contain the laces Comfortable racing insole Anti-perspiration breathable lining Padded tongue made from ultra-breathable fabric Thin rubber sole for responsive pedal feedback Differentiated outsole grip texture Fuel- and oil-resistant outsole construction Technical Specifications Product: Sparco Prime-R Racing Shoes Manufacturer: Sparco Model: Prime-R Upper Material: Kangaroo leather Outsole: Thin rubber with differentiated grip texture Closure: Flat laces with hook-and-loop ankle strap Lining: Anti-perspiration and breathable Ventilation: Perforated upper and breathable tongue Weight: Approximately 240 grams in size 42 Certification: FIA 8856-2018 and SFI 3.3/5 Sizes: EU 36–48 Sparco Prime-R Racing Shoes Sizing Chart Frequently Asked Questions Are the Sparco Prime-R Racing Shoes FIA approved? Yes. The Sparco Prime-R is homologated to the FIA 8856-2018 standard for use in many sanctioned auto racing competitions. Are the Sparco Prime-R Racing Shoes SFI approved? Yes. The Prime-R is also homologated to the SFI 3.3/5 standard. Drivers should confirm the current footwear requirements for their racing series and class. How much do the Sparco Prime-R Racing Shoes weigh? The Prime-R weighs approximately 240 grams in EU size 42. Weight may vary slightly depending on shoe size. What are the Sparco Prime-R Racing Shoes made from? The upper is constructed from lightweight kangaroo leather with breathable perforations and high abrasion-resistant leather inserts in key areas. How do the Sparco Prime-R Racing Shoes fit? The Prime-R has a close, performance-oriented racing fit. The flat laces and hook-and-loop ankle strap allow the driver to adjust the fit while helping secure the foot and contain the laces. Are these shoes suitable for HPDE and track-day driving? Yes. Their lightweight construction, thin sole, and responsive pedal feel make them suitable for professional competition, club racing, time trials, autocross, HPDE events, and track days. Can the Sparco Prime-R be used for karting? The Prime-R can be worn for karting, but it is designed and certified as an auto racing shoe. Karting-specific shoes may provide outsole construction better suited to walking through paddock and pit areas. How should I care for kangaroo leather racing shoes? Keep the shoes dry, avoid unnecessary walking on abrasive surfaces, and allow them to air dry naturally after use. Clean the leather carefully with products intended for delicate leather and do not place the shoes near direct heat. Ultralight Performance and Precise Pedal Control The Sparco Prime-R Racing Shoes combine premium kangaroo leather, breathable comfort, secure ankle support, and an exceptionally thin racing sole. Their lightweight design and direct pedal feedback make them an excellent choice for drivers who demand precision during every braking, throttle, and shifting input.

Sparco Victory 3.0 Driver Race Suit The Sparco Victory 3.0 Driver Race Suit brings lightweight comfort, professional Sparco technology, and certified protection to weekend racers and serious competitors. Built in Italy, the Victory 3.0 uses Sparco’s advanced HOCOTEX® fabric construction to deliver a breathable, lightweight race suit with the protection required for competition use. The Victory 3.0 is the latest evolution of the popular Sparco Victory racing suit. Sparco updated the classic Victory design with modern color options, an improved cut, better fit, and enhanced mobility. The result is a soft, lightweight, and breathable race suit that offers premium performance at a strong value. Sparco’s patented HOCOTEX® technology uses a honeycomb structure with thousands of protective microcapsules woven into a thin, breathable fabric. This single-layer construction provides multi-layer-style protection while reducing bulk and improving airflow. The Victory 3.0 is twice as breathable as a standard multi-layer race suit while maintaining both FIA 8856-2018 and SFI 3.2A/5 approvals. Sparco Victory 3.0 Driver Race Suit Details HOCOTEX® Construction: Single-layer Sparco technology designed to provide multi-layer protection with less bulk. FIA and SFI Approved: FIA 8856-2018 and SFI 3.2A/5 approved for competition use. Lightweight and Breathable: Twice as breathable as a standard multi-layer race suit for improved driver comfort. Fully-Floating Pre-Formed Sleeves: Designed to improve steering movement and reduce restriction in the cockpit. Stretch Panels for Mobility: Improved lower-back stretch panel helps increase flexibility while seated. Shoulder and Armpit Gussets: Additional flexible gussets improve movement and comfort while driving. Hidden Front Pockets: Integrated pockets provide clean styling and practical storage. Made in Italy: Built with Sparco’s patented HOCOTEX® technology and Italian craftsmanship. Single-Layer SFI Protection: One of the only single-layer SFI 3.2A/5 approved race suits available. Sparco Victory 3.0 Race Suit Technology Soft and lightweight HOCOTEX® fabric construction. Single-layer construction with multi-layer protection. Honeycomb microcell structure for improved thermal protection. Twice as breathable as a standard multi-layer race suit. Fully-floating pre-formed sleeves. Stretch panel on the lower back for improved mobility. Flexible gussets in the shoulders and armpits. Hidden front pockets. FIA 8856-2018 and SFI 3.2A/5 approved. Why Choose the Sparco Victory 3.0 Driver Race Suit? The Sparco Victory 3.0 Driver Race Suit is built for drivers who want lightweight comfort, breathable performance, and certified fire protection without jumping into the highest price range. Its HOCOTEX® single-layer construction reduces bulk while maintaining serious protection, and the added stretch panels, floating sleeves, and flexible gussets help the suit move naturally with the driver. For weekend racers, club racers, endurance drivers, and competitive motorsport athletes, the Sparco Victory 3.0 delivers an excellent balance of protection, comfort, breathability, and value. Sparco Victory 3.0 Race Suit Sizing Chart 

Antigravity SC-10 Super-Charger The Antigravity SC-10 Super-Charger is the high-output 10-Amp charging solution that keeps every vehicle battery in your garage ready for action. Whether you’re maintaining a race car between track days, waking up a lithium battery with BMS protection, or topping off the truck before a weekend haul, this Super-Charger handles it all with speed, safety, and intelligence. No guesswork, no clunky old chargers—just modern charging performance in one compact package. Next-generation charging for every battery AntiGravity SC-10 Features Large LCD display: real-time readouts for voltage, current, state of charge, and function icons. No vague LED lights—just clear, accurate information. Easy two-button operation: select battery type or special function in seconds. Charger remembers your last setting after power loss. Voltage test mode: instantly check battery health without a separate multimeter. Multi-use versatility: cars, trucks, motorcycles, ATVs, UTVs, RVs, boats, tractors, and more. Multi-chemistry support: compatible with Lithium (LiFePO4/LFP) and Lead/Acid (AGM, STD, GEL, WET, VRLA). Multi-voltage charging: works with 6v and 12v lithium plus 12v lead/acid batteries. BMS Re-Set: wakes lithium batteries that have gone into protection mode. Power supply mode: delivers up to 10A at 12–14V to maintain vehicle electronics during battery swaps or power small 12V devices. Recondition mode: helps restore performance in damaged or sulfated lead/acid batteries. Maintenance charging: safe low-amp mode for smaller lead/acid batteries such as lawn tractors. Automatic Winter Mode: snowflake icon shows when charging adapts for cold weather. Complete protection suite: safeguards against short-circuit, overload, low/high voltage, over-charge, over-discharge, over-temp, and reverse connection. Specifications Input Voltage 110–120V AC ~ 50–60 Hz (US plug) Output Voltage 6V / 12V DC Max Output Current @ 6V 2A Max Output Current @ 12V STD/AGM/LFP 10A Battery Capacity Range 3Ah – 200Ah Recondition Mode 16.5V DC / 2.5A (lead/acid only) Operating Temperature -4°F to 104°F (-20°C to 40°C) Protection Class Class II, IP65 Dimensions 9.4" × 4.4" × 2.5" Warranty 3 years UPC 711811704918 SKU AG-BC-SC-10 FAQs: Antigravity SC-10 Super-Charger What does the LCD screen show? It displays voltage, amps, charge level (20–100%), battery type (STD, AGM, LFP), and function icons like BMS reset, voltage test, power supply, and winter mode. Is it easy to use for someone not technical? Yes. With only two buttons, it’s simple to set up. Just pick your battery type, select a function if needed, and connect the clamps. The charger does the rest automatically. Can I use the power supply mode for ECU tuning? No. The SC-10 delivers up to 10A at 12–14V, which is perfect for swaps and small 12V devices, but not high-current ECU tuning that requires specialized equipment. Will it recover an old battery? The Recondition function can help revive lead/acid batteries damaged by sulfation or undercharging. Results vary depending on battery condition, but it gives you a chance to restore performance before replacing. Keep every vehicle ready to fire up with the Antigravity SC-10 Super-Charger. Order today and enjoy a modern, versatile charging system built for performance and reliability.

Sabelt Racing Seat Pads Sabelt Seat Pads allow drivers to fine-tune the fit and comfort of their Sabelt racing seat. Designed to improve ergonomics and driver support, these pads help achieve a more secure seating position for track days, club racing, and professional competition. Available options include lumbar support, back support, or a combined set, making it easy to tailor your seat to your body and driving style.

Sparco QRT Side Mount Seat Brackets Sparco QRT side mounts are specifically designed for the QRT-R and other QRT Performance seats. The QRT side mounts are designed for the unique bottom shape of QRT seats. Mutliple side holes allow your QRT seat to be mounted low in the vehicle and with the proper amount of recline or rake. Available in black. TECHNOLOGY Designed for unique QRT bottom shell shape Allows for low mounting in vehicle and proper recline or rake Available in steel or aluminum

Sabelt 2 Inch Harness Pads Sabelt 2-inch harness pads offer additional padding for your harness shoulder straps, with easy-to-use Velcro closure. Sold in pairs.