all

Bell Sport-TX Socks SFI 3.3 The Bell Sport-TX Socks SFI 3.3 are designed to provide an essential layer of fire-resistant protection for drivers competing in demanding racing environments. Built using modern materials and a streamlined design, these socks deliver reliable thermal protection without sacrificing comfort or fit. Designed for Serious Racing Protection Certified to SFI 3.3 standards, the Sport-TX Socks offer dependable heat and flame resistance for track days, wheel-to-wheel racing, and competitive motorsports where fire safety compliance is required. The lightweight construction helps reduce bulk inside racing shoes while maintaining full coverage and comfort. Features SFI 3.3 certified for fire-resistant protection Lightweight, breathable material for all-day comfort Designed for use in all forms of motorsports Modern construction for improved durability and fit Available in black or white Bell Sport-TX Socks SFI 3.3 FAQs: Are the Bell Sport-TX Socks SFI approved? Yes. These socks are certified to SFI 3.3 standards, making them suitable for racing series that require SFI-approved fire-resistant apparel. Can these socks be used for wheel-to-wheel racing? Yes. The SFI 3.3 rating makes them appropriate for wheel-to-wheel racing, track events, and other competitive motorsports where fire protection is required. Do these socks add bulk inside racing shoes? No. The Sport-TX Socks are designed to be lightweight and low-profile, allowing them to fit comfortably inside racing shoes without affecting pedal feel. What colors are available? The Bell Sport-TX Socks SFI 3.3 are available in black and white. If you’re looking for reliable, SFI-certified fire protection with modern comfort and performance, the Bell Sport-TX Socks SFI 3.3 are a smart addition to your racing safety gear.

OMP FIRST-R Racing Seat (2030 Expiry) The OMP FIRST-R Racing Seat is your gateway to the track, offering professional-grade safety and comfort in an entry-level package. Built with a fiberglass shell and upholstered entirely in velour, this seat isn’t just a place to sit—it’s your cockpit command center. With HANS® compatibility, W-side fixing points, and high side bolsters, it’s ready to keep you safe, comfortable, and in control as you chase your next personal best. FIRST-R Racing Seat Features & Benefits Fiberglass Shell Construction: Strong yet lightweight, the shell offers durability and support without adding unnecessary weight to your setup. Velour Upholstery: Fully upholstered in high-quality velour for a soft, comfortable feel that doesn’t compromise durability. HANS® Compatible: Designed to work seamlessly with your Head and Neck Support system for maximum safety on the track. High Side Bolsters: Provides excellent lateral leg support, keeping you securely in place through every high-speed turn. 5 Harness Slots: Equipped to accommodate a 5-point harness, ensuring a snug and secure fit. Removable Base Cushion: Customize your comfort level with the removable cushion, designed for optimal ergonomics. W-Side Fixing Points: Easy and secure side mounting for a hassle-free installation process. Picture This... It’s race day. You slide into the FIRST-R Racing Seat, and it feels like it was custom-made just for you. The velour upholstery hugs you like a trusted co-pilot, while the high side bolsters hold you steady as you dive into corners. The fiberglass shell absorbs the vibrations of the track, letting you focus on the perfect line. Lap after lap, you’re not just driving—you’re commanding. OMP FIRST-R Racing Seat Specifications Shell Material: Fiberglass Upholstery: Full velour Certifications: FIA 8855-1999 Harness Compatibility: 5 harness slots (compatible with 5-point harness systems) Mounting Points: W-side fixing points Additional Features: HANS® compatibility, removable base cushion Fit: Ideal for track day enthusiasts and entry-level racers FIRST-R Racing Seat FAQs Q: Is this seat FIA-approved?A: Yes! The FIRST-R Racing Seat meets FIA 8855-1999 standards, making it suitable for most entry-level motorsport events. Q: Can this seat be installed in a street car?A: While technically possible, it’s designed for track use. Make sure to check local regulations if you’re planning to use it on the road. Q: How does the removable base cushion work?A: The cushion can be removed or adjusted to fine-tune your seating position and comfort level during long stints. Q: Does the seat work with a 6-point harness?A: While designed for 5-point harnesses, the slots may accommodate a 6-point harness. Confirm fitment with your specific harness system. Why Choose the FIRST-R Racing Seat? When you’re starting your racing journey, you need gear that balances performance, safety, and value. The FIRST-R Racing Seat does all that and more, giving you professional-grade features without the pro-level price tag. Whether it’s your first track day or your tenth, this seat has your back—literally. Don’t just dream about the podium—make it your reality. Click Add to Cart now and get ready to feel the difference of racing with confidence!

Sabelt UI-600 Nomex Shirt   Discovery Parts Limited Edition The Sabelt UI-600 Nomex Shirt (Regular Fit) – Discovery Parts Limited Edition combines FIA 8856-2018 certified fire protection with premium comfort and modern stretch-fit construction. This limited edition version features an exclusive Discovery Parts logo and is available only while supplies last. Lightweight comfort with professional-grade fire protection Features FIA 8856-2018 certified for full compliance with international fire safety standards. Stretch-fit, nearly seamless construction ensures a comfortable, performance-driven fit for all body types. Made from Lenzing FR fibers derived from natural raw materials for superior moisture management and cooling performance. Incorporates modacrylic and elastane for total flexibility and long-lasting shape retention under intense heat and movement. Lightweight two-way stretch warp knit fabric delivers high wear resistance and unmatched breathability. Exclusive Discovery Parts Limited Edition—produced in limited quantities and never to be restocked. Sabelt UI-600 Nomex Shirt FAQs: Is the Sabelt UI-600 Nomex Shirt FIA approved? Yes, it’s fully certified under FIA 8856-2018, meeting the latest fire safety standards for motorsports. What makes the Discovery Parts Limited Edition unique? This version includes the Discovery Parts logo and is part of a one-time production run. Is this shirt lightweight and breathable? Absolutely. The advanced Lenzing FR and warp knit fabric ensure cool, dry comfort even under race suits. Does this shirt have a compression or regular fit? This is the regular fit model—designed for comfort and mobility during long stints. Can I machine wash the UI-600 shirt? Yes, wash gently in cold water and air dry to preserve fire-retardant properties and stretch integrity. Order your Sabelt UI-600 Nomex Shirt (Regular Fit) – Discovery Parts Limited Edition today and experience pro-level comfort with exclusive style while supplies last.  

HANS Tether for Sport I, Adjustable, Pro Ultra, & Pro For Quick Click Anchors  Hans Device Replacement Tether For your Hans Adjustable, Pro Ultra, Sport I, and Hans Professional with Quick Click anchors. This Hans replacement tether and slider kit comes in the standard 16.5" length and others for special applications. HANS Tether for Sport I, Adjustable, Pro Ultra, & Pro For Quick Click Anchors Details: Manufacturer: Simpson Manufacturer part number: TK.1241.4 Length: Standard 16.5" / 420cm length works in most applications and is the one that comes standard with every adult device. Some race series require replacements between 2 and 5 years A great upgrade for an older fixed tether device. Kit includes one tether, two tether carriers and 4 new mount screws Length of X-Short tether from inside of both loops: 14.5" / 370cm TK12414XS Length of Short tether from inside of both loops: 15.5" / 395cm TK12414S Length of Standard tether from inside of both loops: 16.5" / 420cm TK12414 Length of Long tether from inside of both loops: 17.5" / 445cm TK12414L If you have a medium or large device, please stay with the standard 16.5" length Your device is safest with the factory installed and tested 16.5" length. If you feel you need a special length, please call us at 706-344-1235 so we can make sure you have the safest set-up.

Sparco Martini Racing Hooded Full-Zip Jacket Lightweight Trackside Style, Martini Racing Heritage The perfect balance of vintage racing style and modern-day comfort, the Sparco Martini Racing Hooded Full Zip Jacket keeps things lightweight and authentic. Whether you're in the paddock or just want to rep your favorite livery in the wild, this hoodie-style zip jacket is your go-to layer for everyday motorsport life. Sparco Martini Racing Hooded Full Zip Jacket Features Soft and Lightweight: Made from a premium 70% cotton / 30% polyester blend, this full zip jacket is ideal for layering without the bulk. Iconic Martini Racing Design: Featuring the unmistakable Martini stripes and embroidered logos, this jacket delivers timeless motorsport style. Jersey-Lined Hood: Designed for comfort on cooler days and breezy track mornings, with a full zip front and adjustable drawstrings. Made in Italy: Tailored in Italy for a sleek European fit—runs smaller than standard U.S. sizing. We recommend ordering one size up. Color Options: Available in navy or white to suit your team look or everyday vibe. Sparco Martini Racing Hooded Full Zip FAQs Does the Sparco Hooded Full Zip Jacket fit true to size? It has a European fit that runs smaller than typical U.S. sizing. Order one size up for best comfort and fit. Is the jacket heavy or more lightweight? It’s lightweight and perfect for layering or wearing during spring/fall temperatures—not overly bulky. Are the logos screen-printed? No, the Martini Racing logos and stripes are embroidered for a premium, authentic finish. Can I wear this jacket at the track? Absolutely—it's ideal for paddock wear, race weekends, or everyday use if you live the racing lifestyle. Celebrate the legacy of Martini Racing with the Sparco Hooded Full Zip Jacket. It's track-inspired comfort you can wear anywhere, whether you're wrenching, watching, or just living motorsport 24/7.

SILVER ROCKET MINI-MAG QUICK CONNECT FORCED AIR HELMET KIT The ultimate forced air solution for Bell HP7, HP77, RS7, and GP3 helmets! Because Good Enough Wasn't Good Enough We built this kit because, quite frankly, the options out there just weren’t cutting it—especially for the SR Enduro Forced Air Adapter for GT4RS. If you're serious about racing and want the best forced air setup, you’ve found it. Why You Need This Silver Rocket Mini-Mag quick connect Forced-Air helmet Kit Ultra-Compact & Durable – Featuring the world’s smallest mini-mag connector, precision-machined from 6061 aluminum. Lightweight yet built to take a beating. Low Profile Design – No more bulky connectors catching on roll cages, roofs, or even your helmet bag. This kit sits flush with your helmet, so you get maximum airflow with minimal interference. Side Outlet for Better Usability – The side-exit design reduces rear top interference, making it easier to use while optimizing airflow direction. Why It's a Game-Changer Seamless Quick Connect – No more fumbling with connections. Snap it in and hit the track. Rugged Construction – Built to withstand the demands of endurance racing. Perfect Fit for Bell Helmets – Specifically designed for HP7, HP77, RS7, and GP3 models. Silver Rocket Mini-Mag quick connect Forced-Air helmet Kit Technical Specs Material: 6061 Aluminum Connector Type: Mini-Mag Quick Connect Helmet Compatibility: Bell HP7, HP77, RS7, GP3 Outlet: Side Exit for Optimal Airflow Silver Rocket Mini-Mag quick connect Forced-Air helmet Kit FAQs Is this compatible with all forced air systems?Designed for the SR Enduro Forced Air Adapter for GT4RS, but works with most forced air systems using mini-mag connectors. Will this interfere with my roll cage or seat clearance?Nope! The low-profile, flush-mount design ensures zero interference. How difficult is installation? Super easy! Just attach it to your Bell helmet and connect your forced air system—you're good to go. Get Yours Today! If you're tired of clunky, awkward forced air setups that barely do the job, this is your solution. Upgrade to the Silver Rocket Mini-Mag quick connect Forced-Air helmet Kit and breathe easy—literally. ORDER NOW and experience the difference on your next race day! 

Paragon 1.5" Hose End Fitting Paragon’s 1.5” Hose End Fitting is custom made for connecting Paragon 1.5” Air Hose to the PVC inlet of your Paragon Viking Pro or Viking Pro Dual cooler.

Antigravity Lithium Car Battery If you're tired of your heavy, sluggish OEM battery dragging down performance, the Antigravity H7/Group-94R Lithium Car Battery is your answer. This drop-in replacement delivers monster cranking power, ultra-lightweight construction, and exclusive wireless jump-starting—all packed into a direct-fit Group-94R case. Whether you're building a street beast or refining a daily driver, this battery is the weight-saving, power-packed upgrade you didn’t know you needed. Massive Power – Minimal Weight – OEM Fit Anti-Gravity Battery Features: Direct-fit H7/Group 94R case size: no modifications needed Wireless RE-START technology: jump-start at the press of a button Built-in full Battery Management System (BMS) for maximum safety Choose from 40Ah, 60Ah, or 80Ah capacities with up to ~2000 cranking amps LiFePO4 lithium iron phosphate chemistry: safer, cooler, more stable power 70% Lighter than OEM - drop up to 40 lbs! Threaded M8x1.25 terminals for secure connections Dimensions: 12.25" x 7" x 7.5" Performance Vehicles That Use H7 Size Aston Martin Audi BMW Cadillac (All ATS/CTS) Chevy Camaro (2010 and later) Chevy Corvette (2013 and later) Charger/Challenger (2010 and later) Lamborghini Lotus Mini Cooper Porsche Antigravity H7/Group 94R Lithium Car Battery FAQs: Does this battery fit my car if I currently have a Group-94R? Yes, it's a direct-fit replacement with OEM dimensions for seamless installation. How does the RE-START function work? If the battery is drained, press the RE-START button on the included key fob to instantly wake the reserve power and start your car—no jumper cables needed. What's the difference between the 40Ah, 60Ah, and 80Ah versions? The capacity determines how much power is stored. 40Ah is great for most builds, while 80Ah is ideal for high-demand electronics or harsh climates. Why can’t the 80Ah version ship by air? Due to lithium shipping regulations, the larger 80Ah size must be shipped ground with adult signature required. NEW! Lightweight Lithium Batteries with Wireless Remote Built-In Jump Starting! Antigravity Batteries has changed the game again with their latest Lithium-Ion Car Batteries. The newest RE-START line of batteries offers built-in WIRELESS Jump-Starting! That means if your battery is ever discharged, simply press the button on the provided key fob, start the car, and drive away! No need for a jump starter or roadside assistance. You don’t even have to open the hood—activate it from inside your vehicle! If you want to track your battery status via Bluetooth, you can use the Bluetooth Battery Tracker PLUS (sold separately).

Sparco Prime Extreme Racing Shoes The Sparco Prime Extreme Racing Shoes are premium motorsport shoes designed for drivers who demand lightweight performance, advanced safety, and precise pedal feel. Made in Italy, the Prime Evo combines high-end materials, FIA and SFI approval, and professional-level construction for serious racing and track use. Built with an ultra-lightweight fabric upper, breathable viscose blend lining, flexible carbon fiber insole, and oil and hydrocarbon resistant rubber sole, the Sparco Prime Evo delivers the comfort, protection, and control needed inside the cockpit. These shoes are designed for both professional and amateur drivers who want dependable performance without sacrificing comfort. Sparco Prime Extreme Racing Shoe Features FIA 8856-2018 approved for motorsport competition use. SFI 3.3/5 homologated for additional racing safety compliance. Designed and manufactured entirely in Italy. Printable ultra-lightweight fabric upper for reduced weight and premium style. Breathable fresh viscose blend lining helps keep feet cool and dry. Ultra-lightweight external lacing system provides a secure and low-profile fit. Oil and hydrocarbon resistant rubber sole designed for racing environments. Rear spoiler sole design improves grip and control. Flexible carbon fiber insole enhances pedal sensitivity and driver feedback. Expanded foam protection insert on the side toe improves lateral impact protection. Transparent silicone toe reinforcement adds durability and protection. Optional carbon fiber heel counter customization available on request. FIA and SFI Approved Racing Footwear The Sparco Prime Extreme Racing Shoes are approved to FIA 8856-2018 and SFI 3.3/5 standards, making them suitable for a wide range of racing and competition environments. These certifications help ensure the shoes meet strict motorsport requirements for safety, performance, and fire-resistant protection. Made in Italy Performance Designed and manufactured entirely in Italy, the Prime Evo reflects Sparco’s focus on motorsport craftsmanship, advanced materials, and driver-focused design. The result is a professional racing shoe that feels lightweight, precise, and refined in the cockpit. Ultra-Lightweight Fabric Upper The printable ultra-lightweight fabric upper helps reduce overall shoe weight while maintaining comfort and support. This construction also allows for a clean, modern look and customization potential, making the Prime Extreme a standout choice for drivers who want both performance and style. Breathable Viscose Blend Lining A breathable fresh viscose blend lining helps manage heat and moisture during intense driving sessions. This helps keep the foot cool and comfortable, which is especially important during endurance racing, hot track days, and long sessions in the car. Carbon Fiber Insole for Pedal Sensitivity The flexible carbon fiber insole is designed to improve sensitivity and control through the pedals. It helps drivers feel brake pressure, throttle input, and pedal movement more clearly, giving better feedback during precise driving situations. Oil and Hydrocarbon Resistant Sole The rubber sole is resistant to oil and hydrocarbons, making it well suited for the paddock, garage, and cockpit environment. The rear spoiler design helps improve grip and support, giving drivers confidence when moving around the car or working the pedals. Protection and Durability The Sparco Prime Extreme includes an expanded foam protection insert on the side toe for improved lateral protection. A transparent silicone reinforcement on the toe adds durability in a high-wear area while preserving the clean design of the shoe. Sparco Prime Extreme Racing Shoe Specifications Approval: FIA 8856-2018 and SFI 3.3/5 Origin: Made in Italy Upper: Printable ultra-lightweight fabric Lining: Breathable viscose blend lining Lacing: Ultra-lightweight external lacing system Sole: Oil and hydrocarbon resistant rubber sole with rear spoiler Insole: Flexible carbon fiber insole Protection: Expanded foam side toe insert and transparent silicone toe reinforcement Optional Customization: Carbon fiber heel counter available on request Use: Professional racing, amateur racing, track days, and automotive competition Sparco Prime Extreme Racing Shoe FAQs Are the Sparco Prime Extreme Racing Shoes FIA approved?Yes. The Sparco Prime Extreme Racing Shoes are FIA 8856-2018 approved for motorsport competition use. Are these shoes SFI approved?Yes. The Sparco Prime Extreme Racing Shoes are also SFI 3.3/5 homologated. Are the Sparco Prime Extreme Racing Shoes made in Italy?Yes. The Sparco Prime Extreme Racing Shoes are designed and manufactured entirely in Italy. What makes these shoes good for pedal feel?The flexible carbon fiber insole and racing-focused sole construction help improve pedal sensitivity, allowing drivers to feel brake, throttle, and clutch inputs more precisely. Are these shoes breathable?Yes. The breathable viscose blend lining helps keep feet cool and dry during intense driving sessions. Can the Sparco Prime Extreme Racing Shoes be customized?Yes. Customization with a carbon fiber heel counter is available on request for additional support and protection.

Stilo ST6 FN Carbon Fiber SA2025 Racing Helmet   The Legendary Stilo Carbon Helmet - Forever Ahead For over 25 years, Stilo has led racing helmet innovation and the ST6 Carbon ushers in a bold new chapter. With input from top programs, engineers refined the front and top aerodynamics for stable performance at speed. Developed with drivers from Formula One and endurance racing, the ST6 reflects real-world needs at every level. The ST6 Carbon is among the lightest full-face helmets available, pairing airflow, visibility, and comfort with modern safety. From the track-tested aero to the dual-lock visor system, every update is aimed at confidence and consistency behind the wheel. The ST6 improves on the market-leading ST5 in key areas: 10% lighter than the Stilo ST5 26% more airflow than the Stilo ST5 11% more visibility Refined liner and cheek pads More shell sizes to optimize weight Reworked visor construction for durability and easy care Updated visor hardware for reliability Stilo ST6 Auto Racing Helmet Features Puro Tech: Stilo carbon process minimizes additional coatings to reduce mass while maintaining protection. New Shell Size Options: now offered in four shell sizes, the ST6 FN helps deliver the smallest, lightest shell appropriate for your head size. Increased Airflow Design: redesigned front ventilation and standard top venting route air through EPS channels to reduce sweat and moisture. Increased Downward Visibility: improved eyeport makes harness fastening faster and enhances situational awareness. Interior Comfort: reshaped cheek pads stabilize fit and comfort at speed. Injection Molded Visor: clear optics with a washable high-performance anti-fog treatment. Dual Visor Lock: complies with FIA standards in both closed and vent positions. Updated Visor Hardware: smoother actuation and easier installation; available in multiple anodized finishes. Stilo ST6 FN Carbon Fiber Helmet Details Manufacturer: Stilo Helmets Manufacturer part number: AA0810AF1X Homologation: FIA 8858-2015 Certification: Snell SA2025 Compatible shields: Stilo ST6 helmet shields Open-ear FN design (no earmuffs) for maximum awareness and cooling Other Versions of the Stilo ST6 Racing Helmet Stilo ST6 GT SA2025 Carbon Fiber Helmet Stilo Helmet ST6 FN 8859-ABP Helmet Stilo ST6 FN Zero 8860-2018 Carbon Fiber Helmet Stilo ST6 FN Zero ABP 8860-2018 Carbon Fiber Helmet Stilo ST6 GT Composite Helmet Stilo ST6 FN 8859-ABP Helmet Stilo ST6 GT 8860 Carbon Fiber Helmet Stilo ST6 FN 8860 Carbon Fiber Helmet Stilo ST6 FN 8860-ABP Carbon Fiber Helmet Stilo ST6 GT ZERO 8860-2018 Carbon Fiber Helmet What Changing in SA2025 Auto Racing Helmets? SA2025 helmets are here, and while the changes may not be groundbreaking, they represent an important evolution in motorsport safety. According to the Snell Memorial Foundation, the SA2025 standard is an evolutionary update from SA2020‚Äînot a complete overhaul. Unlike the M2025 motorcycle standard, which adds rotational impact testing, the SA2025 auto racing helmet standard does not include rotational force requirements. Key SA2025 Helmet Safety Enhancements: Increased Impact Protection: SA2025 helmets are required to handle slightly higher impact speeds and achieve lower maximum peak G-force thresholds across all head-form sizes. Global FIA Alignment: These updated requirements bring the SA2025 standard into alignment with the new FIA 8859-2024 helmet safety regulation, creating more consistency across international motorsports. In short: SA2025 helmets are designed to offer enhanced linear impact protection, making them the safest Snell-rated auto racing helmets to date. Whether you're a competitive racer or a weekend track day enthusiast, upgrading to an SA2025-certified helmet ensures compliance with future racing regulations and gives you peace of mind at speed. Stilo ST6 FN Carbon Fiber SA2025 Helmet FAQs: Is this helmet Snell SA2025 certified? Yes, this listing reflects SA2025 certification for U.S. auto racing. What does FN mean? FN is the open-ear version for maximum cockpit awareness and airflow; GT includes earmuffs for noise reduction and comms. Can I reuse my ST5 shields? No. The ST6 uses its own shield system; choose ST6-specific shields and hardware. How should I choose my size? Measure head circumference and consult the size/pad chart. If between sizes, many drivers prefer the tighter fit for stability. Stilo ST6 FN Carbon Fiber Helmet Sizing Chart Measuring Your Head For Your New Stilo ST6 FN Carbon Fiber Helmet The most effective helmet is one that fits properly. Have an assistant measure around your head about an inch above the eyebrows, around the largest point at the back, and back to the front. Take multiple measurements and use the largest. This helmet will ship with signature required for delivery.

Bell HP7 EVO III Carbon Fiber FIA 8860-2018 Helmet The Bell HP7 EVO III Carbon Fiber Racing Helmet is a professional-level full-face helmet developed from Bell Racing's Formula 1-proven HP7 platform. Designed in collaboration with leading drivers and teams, the HP7 EVO III combines an ultra-lightweight carbon fiber shell, advanced energy management, aerodynamic efficiency, excellent ventilation, and the protection required by the FIA 8860-2018 Advanced Helmet standard. Created for high-speed professional motorsport, the HP7 EVO III is equally at home in open-wheel and open-cockpit race cars as it is in sports cars, prototypes, and GT applications. Its combination of low weight, aerodynamic stability, driver comfort, and premium optical performance makes it one of Bell's most advanced carbon racing helmets. FIA 8860-2018 Advanced Helmet Protection The Bell HP7 EVO III is homologated to FIA 8860-2018, the FIA's Advanced Helmet standard developed for drivers competing at the highest levels of motorsport. The specification places demanding requirements on impact performance and energy management while allowing manufacturers to use advanced materials and construction techniques to minimize helmet weight. The HP7 EVO III should not be confused with the Bell HP77. The HP77 adds Advanced Ballistic Protection for FIA 8860-2018 ABP applications, while the HP7 EVO III is the standard FIA 8860-2018 configuration. Ultra-Light High-Modulus Carbon Fiber Shell The HP7 EVO III uses a high-strength, high-modulus carbon fiber shell engineered to deliver exceptional structural performance while keeping overall helmet mass as low as possible. Bell's High Performance Series uses aerospace-inspired composite manufacturing techniques to create a compact, exceptionally lightweight shell for racers exposed to high lateral loads, heavy braking forces, aerodynamic buffeting, and long race durations. The exposed matte carbon finish gives the HP7 EVO III the unmistakable appearance of Bell's premier professional racing helmets. Advanced Multi-Density Energy-Absorbing Liner Beneath the carbon shell is an advanced multi-density, multi-piece liner engineered to manage impact energy across a range of impact conditions. The combination of a rigid carbon outer structure and carefully engineered internal energy-management materials allows Bell to deliver the high level of protection required for FIA 8860-2018 competition without unnecessary helmet weight or bulk. Optical-Grade SE07 DSAF Visor The Bell HP7 EVO III uses the Bell SE07 3mm shield, one of Bell's premium racing visor systems. The optical-grade visor incorporates Double Screen Anti-Fog technology to help control fogging in high-temperature, high-humidity, and rapidly changing racing conditions. The dual-screen design helps maintain a clear view while reducing the need for additional anti-fog treatments during a race weekend. Replacement SE07 shields are available in several finishes for different lighting and track conditions. 12-Channel Ventilation System The HP7 EVO III features a powerful top and chin-bar ventilation system with 12 intake and extraction channels designed to move cooling air through the helmet while allowing hot air and moisture to escape. The system uses a combination of upper and chin-bar airflow to improve driver comfort during long sessions and in hot cockpits. Bell's aerodynamic air-intake accessories can also be used to direct additional airflow into the helmet depending on the vehicle and cockpit configuration. Developed for Aerodynamic Stability Aerodynamic performance is particularly important in open-cockpit racing, where a helmet is directly exposed to high-speed airflow. Bell designed the HP7 shell and visor as an integrated aerodynamic package to help reduce lift, turbulence, and unwanted helmet movement while also minimizing internal noise. Optional aerodynamic accessories allow the helmet to be tuned for individual applications and seating positions. Available With or Without Duckbill The HP7 EVO III platform is available in configurations with or without Bell's front duckbill chin spoiler. The duckbill is designed to influence airflow around the chin area and can be useful in certain open-cockpit applications where additional aerodynamic control is desired. Optional Aero Tuning Accessories Bell offers several aerodynamic components for the HP7 platform, allowing drivers and teams to fine-tune helmet stability according to cockpit airflow. Rear spoiler Top gurney Chin-bar gurney Air intake components Low-profile side air intakes Side air extractors These components can be combined according to the aerodynamic requirements of the car and driver's seating position. Integrated Communication Routing The HP7 EVO III incorporates channels within the face area to simplify installation of compatible racing communication equipment. Radio wiring can be routed more cleanly through the helmet without unnecessarily interfering with the interior fit, giving professional drivers and teams greater flexibility when configuring communication systems. Drink Tube Compatible The integrated routing channels can also accommodate compatible driver hydration equipment. This makes it possible to configure the HP7 EVO III with a drink tube for endurance racing, long-distance competition, or other applications where hydration while driving is important. Factory-Installed HANS Anchors The Bell HP7 EVO III includes factory-installed HANS anchors as original equipment. This allows the helmet to be paired with a compatible Head and Neck Restraint system without requiring a separate anchor installation before use. Eyeport Gasket for Dirt and Water Protection A synthetic rubber gasket surrounds the visor opening to help reduce the amount of dirt and water entering around the shield. This provides additional protection in open-cockpit competition and during races where drivers may encounter rain, spray, debris, or changing weather conditions. Bell HP7 EVO III Features FIA 8860-2018 homologation Developed with input from professional Formula 1 drivers and teams High-strength, high-modulus carbon fiber shell Ultra-lightweight professional racing construction Advanced multi-density, multi-piece energy-absorbing liner Optical-grade SE07 3mm shield Double Screen Anti-Fog visor technology 12 intake and extraction ventilation channels Top and chin-bar ventilation system Aerodynamically optimized shell and visor design Designed to reduce internal noise and aerodynamic disturbance Integrated channels for racing communications Drink-tube routing capability Factory-installed HANS anchors Synthetic rubber eyeport gasket Available with or without duckbill chin spoiler Compatible with optional Bell aerodynamic accessories Matte carbon fiber finish Available in sizes 54 through 61+ Built for Open-Cockpit and GT Racing The HP7 EVO III was developed for professional drivers competing in extremely fast cars where low helmet weight and aerodynamic stability can have a meaningful effect on driver comfort and fatigue. Its aerodynamic design makes it particularly well suited to open-wheel and open-cockpit racing, while its excellent comfort, ventilation, communications compatibility, and FIA 8860 protection also make it an outstanding choice for GT, prototype, and sports-car competition. HP7 EVO III vs. Bell HP77 The HP7 EVO III meets the FIA 8860-2018 Advanced Helmet standard. The Bell HP77 is based on the same professional HP7 design philosophy but incorporates additional frontal ballistic protection required for FIA 8860-2018 ABP homologation. Drivers whose championship specifically requires Advanced Ballistic Protection should use an HP77 or another helmet carrying the required ABP homologation. When FIA 8860-2018 without ABP is required, the HP7 EVO III provides Bell's premium carbon racing platform. SE07 Shield Compatibility The HP7 EVO III uses Bell's SE07 3mm shield and compatible SV pivot hardware. SE07 replacement shields are available in multiple configurations for different track conditions, allowing drivers to tailor visibility to daylight, bright sun, and changing weather. Interior Fabric Options The standard HP7 EVO III interior uses a Grey fire-resistant comfort fabric. Alternative interior colors may be available by special order, including Black, White, Red, Tan, Purple, Blue, Green, and Neon Yellow. Special-order interiors may involve additional cost and production time. Getting the Correct Bell HP7 Fit Proper helmet fit is essential for both protection and comfort. The helmet should fit firmly and evenly around the entire head without concentrated painful pressure points. Measure the circumference of the head around its widest portion, approximately one inch above the eyebrows and around the back of the skull. Take the measurement several times and use the largest consistent measurement when comparing your head circumference with the Bell sizing chart. The helmet should remain secure when the driver moves or shakes their head and should not rotate independently around the head. Bell HP7 EVO III Carbon Fiber Helmet Sizing Chart Bell HP7 EVO III Carbon Fiber Helmet Questions & Answers What certification does the Bell HP7 EVO III have?The Bell HP7 EVO III is homologated to the FIA 8860-2018 Advanced Helmet standard. Is the Bell HP7 EVO III carbon fiber?Yes. The helmet uses a high-strength and high-modulus carbon fiber shell designed to provide professional-level protection while minimizing helmet weight. Is the HP7 EVO III designed for Formula racing?Yes. The HP7 platform was developed in collaboration with leading Formula 1 drivers and teams and is particularly well suited to open-wheel and open-cockpit competition. Can the HP7 EVO III also be used in GT or sports-car racing?Yes. Its comfort, ventilation, communications compatibility, and FIA 8860-2018 homologation also make it an excellent helmet for GT, prototype, sports-car, and endurance racing. What shield does the Bell HP7 EVO III use?The HP7 EVO III uses the Bell SE07 3mm shield with compatible SV pivot hardware. Does the HP7 visor have anti-fog protection?Yes. The optical-grade SE07 shield uses Bell's Double Screen Anti-Fog system to help control fogging and maintain clear visibility. How many ventilation channels does the EVO III have?The HP7 EVO III configuration features 12 intake and extraction channels through its top and chin-bar ventilation system. Does the Bell HP7 EVO III include HANS anchors?Yes. Factory-installed HANS anchors are included as original equipment. Can a radio communication system be installed?Yes. Integrated channels in the face area allow compatible communication wiring and equipment to be routed through the helmet. Can a drink tube be installed?Yes. The HP7 platform provides routing options that allow compatible hydration equipment to be integrated into the driver's setup. What is the difference between the HP7 and HP77?The HP7 meets FIA 8860-2018, while the HP77 adds Advanced Ballistic Protection and is homologated to FIA 8860-2018 ABP. Are aerodynamic accessories available?Yes. Bell offers compatible rear spoilers, top gurneys, chin-bar gurneys, air intakes, and other aerodynamic accessories for the HP7 platform. What sizes are available?The Bell HP7 platform is available in sizes 54 through 61+, providing several closely spaced sizing options for a precise professional fit. Does this helmet require a signature for delivery?Yes. This helmet ships with signature required for delivery

Stilo ST6 ABP Helmet Cheek Pads Replacement cheek pads for Stilo ST6 ABP helmets help you customize your helmet to provide the perfect fit! These are only for ABP versions of the Stilo ST6 helmet.  If you have a non-ABP Stilo ST6 helmet, please order this version for non-ABP helmets.  We will not accept returns on these items.

Stilo ST5 Breath Deflector Anti-Fog Kit Fitting all ST5 helmets, the Stilo ST5 anti-fog breath deflector kit uses four special components to bring visor fog to a standstill. Your Stilo ST5 helmet - be it an ST5 Composite, Offshore, Carbon, Carbon 8860 or the DiscoveryParts favorite, the Carbon 8860 Zero - came to you with a special anti-fog coating on the visor. By combining the Stilo YA0873 anti-fog breath deflector kit with your specially coated Stilo shield, your best vision is ahead. The four components included in the Stilo YA0873 kit perfectly match your Stilo ST5 chin pad to stop air from coming in through the front air vents. The specially shaped front pad is attached to the inside of your chin pad with a little "lip" of extra material to go between your upper lip and nose. This fire resistant fabric flap with the three vent plugs are a perfect addition to our Stilo accessory department. Stilo ST5 Breath Deflector Anti-Fog Kit Details: Manufacturer: Stilo Manufacturer part number: YA0873 Fits all Stilo ST5 helmets: Yes Fits Stilo ST4 Helmets: No

OMP Tecnica Super Light Race Suit Featherweight Performance, Maximum Protection The OMP Tecnica Super Light Race Suit is built for drivers who want lightweight protection, breathable comfort, and a race-ready fit without unnecessary bulk. When every movement matters and every millisecond counts, the Tecnica Super Light keeps you focused, comfortable, and ready to push harder behind the wheel. Engineered for high-performance drivers, this OMP race suit uses advanced fire-resistant materials, ergonomic stretch panels, and breathable inserts to deliver a lightweight feel without compromising safety. Whether you are competing in endurance racing, sprint racing, or serious track events, the Tecnica Super Light is designed to help you stay cool, comfortable, and confident. Ultra-Lightweight Fireproof Protection The OMP Tecnica Super Light Driver Race Suit uses advanced 2-layer inner compound technology with soft knitted fabric quilted to meta-aramid non-woven fabric. This construction provides serious fire-resistant protection while keeping the suit light and comfortable. The result is a driver suit that feels less bulky than traditional race suits while still meeting the demands of modern motorsport competition. Ergonomic Race-Ready Fit Strategically placed bielastic inserts provide flexibility where drivers need it most. These stretch panels help the suit move naturally with the body, giving you a more tailored fit when steering, shifting, braking, and moving in the cockpit. Pre-curved arms and legs are designed around the natural driving position, helping reduce bunching and improving comfort when seated in a race car. Stay Cool Under Pressure Breathable inserts under the arms and at the sides help improve airflow through the suit. This ventilation helps reduce heat buildup during long sessions, hot race weekends, and demanding endurance events. The Tecnica Super Light is designed to deliver lightweight performance while helping drivers stay cool and focused lap after lap. Smooth Operator Comfort Ultraflat, anti-rubbing seams with fishbone outside top stitching help reduce irritation and chafing. This detail is especially important during long stints, endurance racing, and extended time in the car. Contrast color details on the pockets, inner collar, and suit edges give the Tecnica Super Light a sharp, professional motorsport look. OMP Tecnica Super Light Race Suit Features FIA 8856-2018 approved Lightweight 2-layer inner compound construction Soft knitted meta-aramid fabric Fire-resistant driver suit design Bielastic stretch inserts for improved flexibility Breathable inserts under the arms and at the sides Ultraflat anti-rubbing seams Fishbone outside top stitching Pre-curved arms and legs for the natural driving position Ergonomic race-ready fit Contrast color details on pockets, inner collar, and suit edges Designed for sprint racing, endurance racing, and track competition Why Choose The OMP Tecnica Super Light Race Suit? The OMP Tecnica Super Light Driver Race Suit is a strong choice for racers who want a lightweight FIA-approved suit with serious protection and premium comfort. Its combination of 2-layer fire-resistant construction, stretch inserts, breathable panels, and ultraflat seams makes it ideal for drivers who need comfort and mobility without sacrificing safety. If you want a race suit that feels light, moves well in the car, and offers professional motorsport protection, the Tecnica Super Light is built for exactly that. OMP TECNICA SUPER LIGHT SUIT SIZE CHART Frequently Asked Questions Q: Is the OMP Tecnica Super Light FIA approved?A: Yes. The OMP Tecnica Super Light Race Suit is FIA 8856-2018 approved. Q: Is the OMP Tecnica Super Light suitable for endurance racing?A: Yes. The suit is built for comfort, breathability, and extended wear, making it suitable for both sprint racing and endurance racing. Q: What material is used in the OMP Tecnica Super Light?A: The suit uses lightweight 2-layer inner compound technology with soft knitted fabric quilted to meta-aramid non-woven fabric. Q: Does the Tecnica Super Light have stretch panels?A: Yes. Bielastic inserts are strategically placed to improve flexibility and driver mobility. Q: Does this suit help keep drivers cool?A: Yes. Breathable inserts under the arms and at the sides help improve airflow and reduce heat buildup. Q: Are the arms and legs pre-curved?A: Yes. The suit features pre-curved arms and legs designed for a natural seated driving position. Q: Can I wash the OMP Tecnica Super Light Race Suit?A: Yes, but always follow OMP’s care instructions to protect the fire-resistant materials and maintain the suit’s performance. Q: What should I wear under this race suit?A: Fire-resistant undergarments are recommended for added protection, comfort, and proper motorsport safety layering.

Alpinestars Atom Graphic Driver Race Suit The Alpinestars Atom Graphic Driver Race Suit is built for drivers who need FIA-approved protection, breathable comfort, and race-ready mobility in a clean, modern Alpinestars design. With a two-layer construction, soft knitted liner, and aramid outer shell, the Atom Graphic suit delivers strong heat and flame protection while keeping the driver comfortable in the cockpit. Certified to the latest FIA 8856-2018 standard, this race suit combines professional safety features with practical comfort details, including fully-floating arms, pre-curved arms and legs, stretch panels, and an adjustable belted waist. Two-Layer Construction With Aramid Protection The Alpinestars Atom Graphic Driver Race Suit uses a two-layer construction with a 100% aramidic outer shell fabric for exceptional heat and flame resistance. A soft aramidic knitted liner helps improve comfort and breathability during long track sessions. The suit is designed to balance protection, airflow, and flexibility, making it a strong choice for drivers who want certified Alpinestars racewear without unnecessary bulk. Comfortable Fit In The Driving Position Anatomical arms, legs, and torso paneling are patterned for comfort while seated in the driving position. Pre-curved arms and legs help reduce restriction, while Alpinestars fully-floating arm construction with stretchable knit fabric minimizes material resistance when steering, shifting, and moving inside the cockpit. Knitted Stretch Panels For Mobility Aramidic knitted stretch panels are positioned on the back, waist, and crotch to improve comfort and ease of movement. These stretch zones help the suit move naturally with the driver while also improving breathability. Regular Leg Cuff Design This FIA-approved Alpinestars Atom Graphic suit features regular leg cuffs, making it a traditional cuffed-leg race suit for drivers who prefer a standard fit around the ankles. Alpinestars Atom Graphic Driver Race Suit Features Certified to the latest FIA 8856-2018 standard Two-layer driver race suit construction Soft knitted liner for driver comfort 100% aramidic outer shell fabric Heat and flame-resistant protection Knitted stretch panels for comfort and breathability Fully-floating arm construction Pre-curved arms and legs Stretch panels on the back, waist, and crotch Regular leg cuffs Regular fit design Weight: 420 g/m² Alpinestars Atom Graphic Driver Race Suit Construction Aramidic knitted stretch panels on the back, waist, and crotch Ergonomic collar with soft stretchable insert Extended neck coverage for driver comfort Adjustable belted waist for a secure fit Anatomical arms, legs, and torso paneling Alpinestars shoulder epaulette construction for driver extraction Ribbed elasticized wrists and cuffs Premium YKK double-slider metal zipper Thigh pockets for convenient storage Why Choose The Alpinestars Atom Graphic Driver Race Suit? The Alpinestars Atom Graphic Driver Race Suit is ideal for drivers who want FIA-certified protection, Alpinestars styling, and comfortable mobility at a strong value. With its two-layer aramid construction, breathable stretch panels, floating arms, pre-curved fit, adjustable waist, and regular leg cuffs, the Atom Graphic suit delivers the performance features racers need for serious track use. Frequently Asked Questions Q: Is the Alpinestars Atom Graphic Driver Race Suit FIA approved?A: Yes. The suit is certified to the latest FIA 8856-2018 standard. Q: Is this a two-layer race suit?A: Yes. The Alpinestars Atom Graphic Driver Race Suit uses a two-layer construction with a soft knitted liner. Q: What material is used in the Atom Graphic suit?A: The suit uses a 100% aramidic outer shell fabric with aramidic knitted stretch panels for protection, breathability, and comfort. Q: Does this suit have floating arms?A: Yes. It features Alpinestars fully-floating arm construction with stretchable knit fabric to reduce material resistance while driving. Q: Does the Alpinestars Atom Graphic suit have stretch panels?A: Yes. Stretch panels are positioned on the back, waist, and crotch to improve comfort and ease of movement. Q: Does this suit have boot cuffs?A: No. This FIA-approved race suit has regular leg cuffs. Q: What is the suit weight?A: The Alpinestars Atom Graphic Driver Race Suit weighs 420 g/m². Alpinestars Atom Graphic Driver Race Suit Size Chart

Sparco Competition Lady Race Suit For Women Finally!  A women's racing suit that isn't only available in pink or light blue! The Sparco Competition Lady women's race suit is an all-new lightweight, three-layer race suit specifically tailored for women. It offers superior fire protection, breathability, and comfort. The Sparco Competition Lady women's race suit is made from a new generation of fabrics offering a soft, lightweight outer fabric and breathable inserts at the sides and underarms. It has pro features like large stretch panels and fully-floating sleeves for maximum comfort. It also uses a light-weight zipper, a soft knit collar, pre-curved arms and legs, hidden pockets, tone-on-tone stitching, and Sparco signature epaulettes. Sparco Competition Lady Driver Race Suit Details: FIA 8856-2018 SFI 3.2A/5 Tailored specifically for women Lightweight three-layer construction Fully-floating sleeves Pre-curved arms and legs Ultra-soft knit cuffs and collar Lightweight YKK zipper Multiple stretch panels for comfort