all

VP Racing Power Spout Fill Hose Kit The VP Power Spout screws directly on to the pull out spouts found on VP Racing Fuel five-gallon metal fuel cans, making pouring faster, cleaner and safer. "No-Glug" pouring features a 1/4" vent tube that extends to the bottom of the fuel can to allow air to enter for perfectly smooth, no-spill refueling of everything from your LO206 kart to your tire destroying late model. VP really did their research on the Power Spout, resulting in a true racer's favorite. VP Racing Power Spout Fill Hose Kit Details Manufacturer: VP Racing Manufacturer part number: 348 Fits 5 gallon VP metal fuel cans only Vent tube included Does not fit VP Racing HDPE motorsport utility jugs. VP Racing fuel can sold separately.

Sparco CRW Racing Gloves The Sparco CRW Racing Gloves are purpose-built for drivers competing in cold, damp, and challenging weather conditions. Their thermal neoprene construction helps retain warmth while maintaining the flexibility and steering-wheel feel needed for precise vehicle control. Thermally sealed seams help reduce moisture penetration, while the coated high-grip palm provides dependable traction when rain, spray, and low temperatures make the cockpit more difficult to manage. A flexible nylon and spandex outer layer supports natural hand movement without adding unnecessary bulk. Cold-Weather Protection for Motorsport Low temperatures can reduce hand dexterity, steering sensitivity, and driver comfort. The Sparco CRW Gloves provide added insulation for wet karting sessions, rally stages, autocross events, and other motorsport activities held in cold or unpredictable weather. The close-fitting construction helps preserve control of the steering wheel, paddle shifters, switches, and other cockpit components while providing more warmth than a traditional lightweight driving glove. Thermal Neoprene Construction Flexible neoprene forms the primary thermal layer of the Sparco CRW. The material helps retain body heat while conforming closely to the hand, allowing the driver to maintain a secure and natural grip. Unlike bulky winter gloves, the CRW is designed specifically for driving. Its streamlined shape limits excess material around the fingers and palm, helping preserve steering feedback and cockpit dexterity. Thermally Sealed Seams Thermally sealed seams help limit the entry of water and cold air through the glove construction. This provides improved comfort during light rain, track spray, damp paddock conditions, and low-temperature competition. The sealed design also helps retain warmth inside the glove, allowing the driver to remain focused when weather conditions begin to deteriorate. High-Grip Coated Palm A coated high-grip palm creates a secure connection between the driver and steering wheel. The grip surface is especially beneficial when the cockpit, wheel, or gloves become damp during wet-weather driving. The low-profile coating adds traction without creating excessive thickness, helping the driver retain steering sensitivity while reducing the need to squeeze the wheel tightly. Flexible Nylon and Spandex Outer Layer The exterior coating is constructed from 80% nylon and 20% spandex. This combination provides durability, stretch, and flexibility while allowing the glove to move naturally with the hand. The stretch outer layer supports repeated steering inputs and finger movement without compromising the thermal benefits of the neoprene construction. Elasticized Wrist An elasticized wrist provides a close, secure fit and helps reduce the entry of cold air. The streamlined closure also makes the gloves easy to put on and remove without requiring a bulky external adjustment strap. The extended wrist area provides additional coverage and can overlap with compatible outerwear or driving apparel for improved protection from the elements. Water-Resistant Construction The Sparco CRW Gloves are designed to resist moisture during damp and wet-weather use. Their neoprene materials and sealed seams help keep the hands warmer and more comfortable when exposed to rain or track spray. These gloves should be considered water resistant rather than completely waterproof, particularly during prolonged exposure or full immersion. Sparco CRW Racing Glove Features Thermal neoprene construction for cold-weather driving Thermally sealed seams help reduce moisture penetration Coated high-grip palm improves steering-wheel control Ergonomic shape supports natural hand movement Flexible construction helps preserve steering feedback Elasticized wrist helps retain warmth and block cold air Water-resistant design for damp and wet conditions Outer coating constructed from 80% nylon and 20% spandex Suitable for karting, rally, autocross, and track-day use Sparco CRW Glove Specifications Manufacturer: Sparco Model: CRW Product Type: Cold and Wet-Weather Racing Gloves Primary Material: Thermal Neoprene Outer Material: 80% Nylon and 20% Spandex Palm: Coated High-Grip Surface Seams: Thermally Sealed Wrist: Elasticized Entry Weather Protection: Water Resistant Recommended Conditions: Cold, Damp, and Wet-Weather Motorsport Why Choose the Sparco CRW Gloves? The Sparco CRW is designed for weather conditions where a conventional lightweight driving glove may not provide enough warmth or moisture protection. Its thermal neoprene construction, sealed seams, elasticized wrist, and coated palm work together to provide a practical balance of insulation, flexibility, and grip. For cold karting events, wet rally stages, early-season autocross competition, and rainy track days, the CRW helps drivers maintain comfort and confidence without sacrificing essential steering control. Sparco CRW Glove Size Chart Frequently Asked Questions Are the Sparco CRW Gloves waterproof?The gloves are water resistant and designed to help repel moisture during wet-weather driving. They are not intended to remain completely waterproof during prolonged exposure or full immersion. What conditions are the Sparco CRW Gloves designed for?They are designed for cold, damp, and wet motorsport conditions where additional warmth and moisture resistance are beneficial. What materials are used in the Sparco CRW Gloves?The gloves use a thermal neoprene construction with an outer coating made from 80% nylon and 20% spandex. Do the palms provide good steering-wheel grip?Yes. The coated high-grip palm is designed to improve traction and control, including when the steering wheel or gloves become damp. Will the neoprene construction restrict hand movement?The ergonomic shape and flexible materials are designed to provide warmth while preserving finger movement, steering feel, and cockpit dexterity. Do the gloves have sealed seams?Yes. Thermally sealed seams help reduce the entry of moisture and cold air while retaining warmth inside the gloves. Are the Sparco CRW Gloves suitable for karting?Yes. They are suitable for karting, rally, autocross, track days, and other driving activities held in cold or wet conditions. Are these gloves FIA homologated?The Sparco CRW is designed primarily as a cold and wet-weather driving glove. Confirm the current product certification and your sanctioning organization’s requirements before using it in an event that requires homologated fire-resistant gloves. Are the Sparco CRW Gloves suitable for warm-weather racing?They are primarily intended for cold and wet environments. A lighter and more breathable racing glove may be more comfortable in warm, dry conditions. How should the Sparco CRW Gloves be cleaned?Gently hand wash them with mild soap and cool water, then allow them to air dry completely. Avoid bleach, harsh chemicals, machine drying, and direct high heat.

Sparco Racing Hooded Full-Zip Lightweight Trackside Style, Sparco Racing Heritage The perfect balance of vintage racing style and modern-day comfort, the Sparco Racing Hooded Full Zip Jacket keeps things lightweight and authentic. Whether you're in the paddock or just want to rep your favorite livery in the wild, this hoodie-style zip jacket is your go-to layer for everyday motorsport life. Sparco Racing Hooded Full Zip Jacket Features Soft and Lightweight: Made from a premium 100% pre-shrunk cotton, this full zip jacket is ideal for layering without the bulk. Iconic Racing Design: Featuring timeless motorsport style. Color Options: Available in Black to suit your team look or everyday vibe. Sparco Racing Hooded Full Zip FAQs Does the Sparco Hooded Full Zip Jacket fit true to size? It has a European fit that runs smaller than typical U.S. sizing. Order one size up for best comfort and fit. Is the jacket heavy or more lightweight? It’s lightweight and perfect for layering or wearing during spring/fall temperatures—not overly bulky. Can I wear this jacket at the track? Absolutely—it's ideal for paddock wear, race weekends, or everyday use if you live the racing lifestyle.

Sparco Dakar Duffle Bag The Sparco Dakar 110L Duffle Bag is the race-weekend gear hauler built for drivers who are tired of playing trunk Tetris with helmets, suits, shoes, gloves, radios, and all the little things that somehow multiply before every track day. With a large 110L capacity, water-resistant construction, and the ability to carry it as either a duffle or backpack, the Dakar is made to move your gear from garage to paddock without turning the trip into a workout. Large-capacity Sparco gear bag with duffle and backpack carry options The Dakar 110L uses a spacious main compartment for bulky race gear, an internal mesh zippered pocket for smaller items, and an outer pocket for quick-access essentials. Detachable backpack straps, a removable shoulder strap, and reinforced carry handles give you multiple ways to haul it, whether you are loading up for a local autocross, a full HPDE weekend, or a long trailer trip. Features 110L large-size capacity for helmets, suits, shoes, gloves, and track-day gear Can be carried as a traditional duffle bag or worn as a backpack Water-resistant TPU/polyester construction with rain-proof zipper design Large main compartment with mesh zippered internal storage Convenient outer pocket for small items you need quickly Molle-style exterior attachment system for extra accessories Detachable shoulder strap and padded backpack straps Clear luggage tag holder for easy identification in the paddock or trailer Available in Black/Black, Black/Blue, and Black/Red Sparco Dakar 110L Duffle Bag FAQs How big is the Sparco Dakar 110L Duffle Bag? The large Dakar bag has a 110L capacity and measures about 27.5 inches long by 15.7 inches wide by 15.7 inches high. Can the Sparco Dakar 110L be used as a backpack? Yes. The Dakar is designed for dual use as a duffle bag or backpack, with detachable backpack straps for easier carrying through the paddock. Is the Sparco Dakar bag waterproof? It is built from water-resistant TPU/polyester material and uses a rain-proof zipper design to help protect your gear from wet paddock conditions and light weather exposure. Will this bag fit a helmet and race suit? Yes. The 110L large size is made for bulky race gear and is well suited for carrying a helmet, suit, shoes, gloves, head-and-neck restraint, and smaller accessories. What colors are available? This listing includes Black/Black, Black/Blue, and Black/Red color options. Pack your race gear like you actually planned ahead. Add the Sparco Dakar 110L Duffle Bag to your setup and make track-day loading a whole lot easier.

OMP OTW Pit Crew Shoes OMP Pit Crew Shoes: Where Comfort Meets Durability In the Pit Lane Ever felt like your feet were just another part of the car, absorbing every bump and vibration on the track? Well, kiss those days goodbye! The OMP Pit Crew Shoes are here to shift your foot comfort into high gear. Designed with the adrenaline junkie in mind, these shoes are the perfect co-pilot for over-the-wall crews, track workers, extreme off-road racers, and anyone who believes that life is too short to drive boring cars. OMP Pit Crew Shoes Features Built for the Long Haul: Crafted from the finest suede leather panels, these shoes aren't just a pretty face. They're tough, durable, and ready to handle the heat when the race is on. Safety First, But Make It Fashion: With inner protective material, these shoes don't just look good—they provide unmatched protection against the elements and the unexpected. Secure Your Victory: Laces and an ankle Velcro strap ensure your shoes stay on your feet, where they belong, no matter how intense the action gets. Comfort That Keeps on Giving: Internal padding, along with ankle and arch support, means your feet will feel as fresh at the finish line as they did at the starting line. Certified and Ready: SFI 3.3/5 homologated, because your safety is not a pit stop—it's the main event. Experience the Difference Imagine standing at the edge of the track, the roar of engines filling the air, the smell of burning rubber and victory in the nose. Your feet? They're as comfortable as they are in your favorite slippers, encased in the OMP Pit Crew Shoes. Whether you're sprinting to change a tire or navigating the rugged terrain of an off-road race, these shoes are your trusty sidekicks, ensuring every step is secure, protected, and oh-so-comfortable. OMP Pit Crew FAQs Q: Can these shoes really handle the heat of racing? A: Absolutely! Designed with the demands of racing in mind, they're built to withstand the heat, pressure, and intensity of the track. Q: Are they only for professional racers? A: Not at all! Whether you're a professional pit crew member, an amateur racer, or just someone who loves the racing lifestyle, these shoes are for you. Ready to Step Up Your Game? Don't let subpar footwear hold you back from crossing the finish line. With the OMP Pit Crew Shoes, you're not just buying a pair of shoes; you're investing in comfort, safety, and the sheer thrill of racing. So, why wait? Grab your pair today and feel the difference with every step, turn, and victory lap. Your feet (and your podium finish) will thank you.

OMP KS-4 ART Kart Racing Gloves The OMP KS-4 ART Kart Racing Gloves combine lightweight steering feel, dependable silicone grip, and distinctive printed graphics in an accessible karting glove for youth and adult drivers. Designed for competitive and recreational karting, the KS-4 ART helps drivers maintain a secure connection with the steering wheel without the bulk of a heavily padded palm. Internal seams create a clean exterior profile, while the lightweight palm improves responsiveness across changing grip conditions. A straight-cut wrist with elastic retention keeps the glove securely positioned, making the KS-4 ART a practical choice for practice sessions, club competition, rental karting, and drivers purchasing their first dedicated pair of kart gloves. Lightweight Palm for Responsive Steering Feel The KS-4 ART uses a lightweight palm construction that minimizes unnecessary material between the driver and steering wheel. This helps preserve the feedback needed to recognize changes in steering load, front-tire grip, and chassis movement. The streamlined design is particularly well suited to racers who prefer direct steering sensitivity rather than thick cushioning or substantial vibration-damping material. Silicone-Rubber Ultragrip Palm A silicone-rubber ultragrip pattern increases traction against the steering wheel. The grippy surface helps keep the hands securely positioned during braking, cornering, and rapid changes of direction. Improved traction can also reduce the amount of gripping force needed to control the wheel, helping the driver maintain a more relaxed hand position during longer sessions. Internal Seam Construction The KS-4 ART uses internal seams to create a smooth, streamlined exterior. This construction keeps the outside edges of the fingers clean and reduces exposed stitching that could contact the steering wheel. Correct sizing is important with internally stitched gloves. The glove should fit closely without allowing the seams to press uncomfortably against the fingertips or sides of the fingers. Close, Flexible Karting Fit The glove is designed to follow the shape and movement of the hand while steering. A close fit helps prevent loose fabric from shifting independently of the fingers or bunching between the palm and wheel. The fingertips should be filled without painful pressure, and the driver should be able to open and close the hand freely before using the gloves on track. Straight Wrist with Elastic Closure A straight-cut wrist gives the KS-4 ART a clean, simple opening. Integrated elastic helps keep the glove securely positioned without requiring a bulky hook-and-loop strap. The flexible wrist also makes the gloves quick to put on and remove between sessions while maintaining dependable retention once they are in place. Three Printed Graphic Designs The KS-4 ART is offered in three printed graphic designs that give the glove a more distinctive appearance than a basic solid-color karting glove. The graphic treatment adds visual impact without relying on thick decorative overlays. Drivers can choose a design that coordinates with their karting suit, helmet, kart graphics, or team colors. Adult and Youth Karting Sizes The KS-4 ART is available in both adult and children’s sizes. Dedicated smaller sizes provide young drivers with a closer and more functional fit than attempting to use an oversized adult glove. Glove size should be selected from the driver’s actual hand measurement rather than age alone, since palm width and finger length can vary considerably among junior racers. OMP KS-4 ART Kart Racing Glove Features Lightweight karting-glove construction Responsive palm preserves steering-wheel feedback Silicone-rubber ultragrip palm improves control Internal seams create a clean exterior profile Close fit reduces loose material and bunching Straight-cut wrist provides a streamlined opening Elastic wrist closure keeps the glove securely positioned Available in three printed graphic designs Offered in adult and children’s sizes Designed for competitive and recreational karting OMP KS-4 ART Kart Racing Glove Specifications Manufacturer: OMP Model: KS-4 ART Product Type: Kart Racing Gloves Product Code: KB0-2757-A01 Palm: Lightweight Silicone-Rubber Ultragrip Palm Seam Construction: Internal Wrist: Straight Cut with Elastic Closure Graphics: Three Printed Designs Adult Sizes: XXS through XL Children’s Sizes: 4, 5, and 6 Intended Use: Kart Racing How the KS-4 ART Differs from the Standard KS-4 The KS-4 ART uses a silicone-rubber ultragrip palm and a selection of printed graphic designs. The standard KS-4 is listed with a suede-leather palm and a simpler silicone-printed design on the back of the glove. Drivers seeking a more modern appearance and a more responsive silicone grip surface may prefer the KS-4 ART. Those wanting a traditional suede palm may favor the standard KS-4. How the KS-4 ART Compares with the OMP KS-2 ART The KS-4 ART uses internal seams and is positioned as a simpler, value-focused karting glove. The KS-2 ART uses external seams and a lightweight stretch-polyester construction intended to provide a more performance-oriented fit. Drivers who are sensitive to stitching inside the fingers may prefer the externally stitched KS-2 ART. Racers prioritizing affordability, lightweight grip, and bold graphics may find the KS-4 ART better suited to their needs. Who Should Choose the OMP KS-4 ART? The KS-4 ART is a strong option for junior racers, rental-kart drivers, club competitors, and recreational karters ready to move beyond general-purpose gloves. Its lightweight palm and silicone grip also make it useful for practice sessions where direct steering feel is important. Drivers entering a championship with mandatory glove homologation should confirm the event rules before purchasing, since OMP does not list FIA 8877-2022 approval for this model. OMP KS-4 ART Kart Racing Gloves Size Chart Frequently Asked Questions Are the OMP KS-4 ART Gloves FIA 8877-2022 approved?OMP does not list FIA 8877-2022 homologation for the KS-4 ART. Drivers competing in events with mandatory certified gloves should confirm eligibility with their championship before ordering. Are these fire-resistant gloves for automobile racing?No fire-resistant automobile-racing approval is listed. The KS-4 ART is a karting glove and should not replace FIA- or SFI-approved Nomex gloves when flame-resistant equipment is required. Does the KS-4 ART have a suede palm?No. The official KS-4 ART specification identifies a silicone-rubber ultragrip palm. The standard OMP KS-4 is the related model listed with a suede-leather palm. Are the seams inside or outside the fingers?The KS-4 ART uses internal seams. Drivers who strongly prefer stitching outside the fingers should consider an externally stitched model such as the OMP KS-2 ART. Will the internal seams be uncomfortable?They should not cause discomfort when the glove is correctly sized. A glove that is too short or narrow may press the seams against the fingertips and finger sides. Is the KS-4 ART heavily padded?No. Its lightweight palm emphasizes steering response and sensitivity rather than substantial vibration damping. How does the ultragrip palm feel on a suede steering wheel?The silicone-rubber pattern creates a secure, tacky connection with common kart steering-wheel materials. The exact grip level will vary with wheel condition, cleanliness, and moisture. Will the grip make hand repositioning difficult?The palm is designed to resist slipping, so drivers may need to lift the hand slightly rather than drag it across the steering wheel during repositioning. Are dedicated children’s sizes available?Yes. OMP lists children’s sizes 4, 5, and 6 in addition to adult sizes XXS through XL. Should I buy a larger youth size so my child can grow into it?Oversized gloves can leave loose material at the fingertips and reduce steering control. Choose the size that fits correctly now rather than allowing substantial room for growth. How should the KS-4 ART fit?The glove should fit closely around the palm and fingers without restricting circulation or movement. There should be little empty space at the fingertips. Is the KS-4 ART suitable for indoor rental karting?Yes. Its lightweight construction, silicone grip, and elastic wrist make it a practical choice for indoor and outdoor recreational karting. Can the KS-4 ART be used for sim racing?Yes. The low-profile palm and silicone grip can provide good wheel control for sim racing, although the glove is designed primarily for karting. How should the gloves be cleaned?Hand wash them gently in cool water with mild soap, then allow them to air dry naturally. Avoid bleach, machine drying, radiators, and direct high heat. How can I prevent the silicone palm from wearing prematurely?Use the gloves mainly for driving and avoid handling rough bodywork, tools, chains, exposed fasteners, or abrasive surfaces while wearing them.

Stilo Venti4 WRC Composite White SA2025 FIA 8859 Rally Helmet Factory-Integrated Rally Communications in a Composite Open-Face Helmet The Stilo Venti4 WRC Composite White SA2025 FIA 8859 Rally Helmet is designed for drivers and co-drivers who need clear in-car communication, open-face visibility, and current race-ready certification. Built on Stilo’s proven Venti WRC platform, this gloss white composite helmet includes integrated intercom hardware, an improved microphone boom shape, and factory-fitted HANS post anchors for serious rally and performance driving use. Stilo’s Venti4 WRC line is an evolution of the championship-proven WRC helmet family, now offered with Snell SA2025 and FIA 8859-2024 certification. The composite shell construction keeps this helmet positioned as a strong value within Stilo’s premium rally range, while the adjustable peak and short-visor compatibility help tailor visibility to changing stage conditions. Stilo Venti4 WRC Features Snell SA2025 approved open-face motorsports helmet FIA 8859-2024 certified Prepreg composite shell construction Gloss white finish Built-in Stilo rally intercom system Improved microphone boom shape designed to deflect cabin noise Compatible with WRC intercom systems Factory-fitted HANS post anchors Adjustable peak for improved visibility in changing light Compatible with optional short visors Speaker compatible with speaker cutouts Wired for audio Black Nomex interior liner Removable interior padding Double D-ring chin strap Helmet bag included Sold individually Stilo Venti4 WRC Composite Sizing Chart   Built for Rally Communication The Venti4 WRC Composite White is engineered around the communication demands of rally competition. Its factory-integrated intercom setup and refined microphone boom shape are designed to improve voice clarity in noisy cabins, helping drivers and co-drivers stay connected through rough stages, quick notes, and high-concentration sections. Open-Face Visibility with Adjustable Peak Control Rally drivers often need a wide, unobstructed field of view, and the Venti WRC platform delivers that classic open-face layout. The adjustable peak helps manage overhead glare, while compatibility with optional short visors gives racers another way to refine visibility for their preferred cockpit setup. Modern Certification with HANS Anchors Included Stilo lists this Venti4 WRC Composite White helmet with Snell SA2025 and FIA 8859-2024 approval, along with factory-fitted HANS post anchors. That combination makes it a purpose-built choice for competitors who want a current-generation rally helmet with key safety hardware already integrated. Stilo Venti4 WRC Specifications Brand: Stilo Model: Venti4 WRC Composite White SA2025 8859 Helmet Family: Venti WRC Helmet Type: Open Face Auto Racing Helmet Certification Rating: Snell SA2025 and FIA 8859-2024 Outer Shell Material: Composite Finish: Gloss Graphic Design: Gloss White Shell Color: White Face Shield Included: No - Sold Separately Shield Release Mechanism: Not Applicable Head and Neck Restraint Compatible: Yes Factory-Fitted HANS Post Anchors: Yes Interior Liner Material: Nomex Interior Liner Color: Black Removable Inside Liner: Yes Intercom Included: Yes Speaker Compatible: Yes Speaker Cutouts: Yes Wired for Audio: Yes Internal Sun Visor Included: No Tear-Off Post Compatible: No Tear-Off Posts Included: No Chin Strap Type: Double D Ring Ventilation: Yes Helmet Bag Included: Yes Quantity Sold: Individually Stilo Venti4 WRC FAQs Does the Stilo Venti4 WRC Composite White helmet include communications?Yes. Stilo lists this Venti4 WRC model with a built-in intercom system, speaker compatibility, speaker cutouts, and wired-for-audio construction. What certifications does this Venti4 WRC helmet carry?Stilo lists the helmet with Snell SA2025 approval and FIA 8859-2024 certification. Are HANS posts included on this helmet?Yes. Stilo states that the Venti WRC platform includes factory-fitted HANS post anchors. Does it come with a face shield?No. Stilo lists the face shield as not included and sold separately. The helmet is compatible with optional short visors. What is the purpose of the adjustable peak?The adjustable peak is designed to help optimize visibility in changing light conditions during motorsports use. Why is the microphone boom shape different on the Venti4 WRC?Stilo says the updated boom shape is designed to better deflect cabin noise for clearer driver and co-driver communication. The Stilo Venti4 WRC Composite White SA2025 FIA 8859 Rally Helmet combines professional rally communication features, modern certification, and Stilo’s iconic open-face WRC design for drivers who want confidence, clarity, and competition-ready refinement.

Bell Sport-TX Balaclava The Bell Sport-TX Balaclava provides lightweight fire-resistant protection, breathable comfort, and race-ready performance for drivers competing in demanding motorsports environments. Designed to be worn beneath a racing helmet, the Sport-TX balaclava adds critical thermal protection for the head and neck while maintaining exceptional comfort during long sessions on track. Constructed using a soft knit aramid fabric blend, the Bell Sport-TX Balaclava delivers permanent flame resistance that will never wash out over time. Its breathable single-layer design helps drivers stay comfortable while maintaining the protection required for motorsports competition. Bell Sport-TX Balaclava Features Single-layer breathable soft knit construction Permanently flame-retardant aramid fibers Lightweight fire-resistant design Large eye opening for unrestricted visibility Extended front bib for improved neck coverage Flat-sewn seams improve long-session comfort Designed to fit comfortably beneath racing helmets SFI 3.3 homologation approved Additional Head and Neck Protection Fire-resistant balaclavas provide a critical additional layer of thermal protection for the head and neck beneath a racing helmet. The Bell Sport-TX Balaclava is engineered to help reduce heat transfer while maintaining comfort and breathability during intense racing conditions. Comfortable Low-Bulk Design The extended front bib tucks neatly into a racing suit collar without bunching over the shoulders, improving comfort and fit during long races. Flat-sewn seams reduce irritation and pressure points while the large eye opening provides unrestricted peripheral vision inside the cockpit. Bell Sport-TX Balaclava Specifications Certification: SFI 3.3 Single-layer fire-resistant aramid construction Breathable soft knit fabric design Large unrestricted eye opening Extended front bib coverage Flat-sewn seam construction Available Colors: White Black Small Bell logo positioned on front neck area Essential Motorsports Safety Equipment Many racing sanctioning bodies require fire-resistant undergarments including balaclavas, socks, and underwear as part of approved driver safety equipment. The Bell Sport-TX Balaclava adds an important thermal protection layer beneath a racing helmet while maintaining lightweight comfort and breathability. Why Buy the Bell Sport-TX Balaclava from Discovery Parts? Discovery Parts supplies premium motorsports safety equipment trusted by racers across all levels of competition. Our knowledgeable team provides expert support, fast shipping, and race-proven products designed for driver protection, comfort, and performance. Bell Sport-TX Balaclava FAQs What certification does the Bell Sport-TX Balaclava carry? The Bell Sport-TX Balaclava is certified to SFI 3.3 standards for fire-resistant motorsports head and neck protection. What material is used in the Bell Sport-TX Balaclava? The balaclava is constructed using soft knit aramid fibers that provide permanent flame resistance and breathable comfort. Will the flame resistance wash out over time? No. The aramid fibers provide permanent flame retardance that remains effective throughout the life of the balaclava. Does the Bell Sport-TX Balaclava fit comfortably under a helmet? Yes. The lightweight low-bulk construction is specifically designed for comfortable use beneath racing helmets. What is the purpose of the extended front bib? The extended front bib provides additional neck protection and tucks neatly into a racing suit collar without bunching. What colors are available for the Bell Sport-TX Balaclava? The Bell Sport-TX Balaclava is available in White and Black color options. Order Your Bell Sport-TX Balaclava Today Upgrade your motorsports safety system with the Bell Sport-TX Balaclava from Discovery Parts. Designed for racers who demand lightweight comfort and dependable fire-resistant head and neck protection.

Bell XD7 PRO Racing Helmet – Snell SA2025 Certified The Bell XD7 PRO Racing Helmet is the next generation of Bell Racing's proven GTX3 helmet, engineered for competitive drivers demanding advanced protection, exceptional airflow, and outstanding visibility in demanding motorsport environments. Designed with dirt track, oval racing, and open-wheel competition in mind, the XD7 PRO combines a lightweight premium carbon-fiberglass composite shell with an advanced multi-density impact liner and Bell's innovative Venturi ventilation system. Certified to Snell SA2025, the XD7 PRO features an optical-grade SE07 Double Screen Anti-Fog (DSAF) shield, Bell Racing SmartLock mechanism, factory-installed HANS anchors, and integrated channels for optional radio communications and hydration systems. A redesigned ventilation system with rear-facing chin bar vents and strategically positioned extraction ports helps maintain airflow while reducing the amount of dirt and dust entering the helmet. This makes the XD7 PRO especially well suited for drivers competing in dusty and challenging racing environments. Available in White and Matte Black, the Bell XD7 PRO brings modern racing helmet technology to drivers seeking an advanced successor to the legendary GTX3. Bell XD7 PRO Racing Helmet Key Features Snell SA2025 Certified: Meets the latest Snell automotive racing helmet certification standard. Premium Carbon-Fiberglass Composite Shell: Lightweight shell construction engineered for impact protection, structural strength, and driver comfort. Advanced Multi-Density Impact Liner: Multi-piece liner designed to maximize energy absorption during impacts. Next-Generation GTX3 Design: Builds on Bell's proven GTX3 racing helmet platform with updated ventilation, optics, and comfort. Venturi Ventilation System: Rear-facing chin bar vents and extraction ports promote airflow while helping limit dust intrusion. Adjustable Upper Air Intakes: Allows drivers to regulate airflow according to racing conditions. SE07 3mm DSAF Shield: Optical-grade Double Screen Anti-Fog shield provides clear visibility and improved fog resistance. Bell Racing SmartLock Mechanism: Secure shield retention system designed for demanding motorsport conditions. Synthetic Rubber Eyeport Gasket: Helps prevent dirt, water, and unwanted airflow from entering around the shield opening. Integrated Communication Channels: Accommodates optional microphones, radio wiring, and other communication equipment. Hydration System Compatible: Built-in channels allow installation of compatible drinking tubes and hydration valves. Factory-Installed HANS Anchors: Includes mounting posts for compatible frontal head restraint systems. Interior Customization: Compatible interior kits are available for ear cup or cheek pad configurations. Fire-Resistant Interior: Dark grey high-strength, high-comfort FR fabric. Lightweight Carbon-Fiberglass Composite Shell The Bell XD7 PRO features a lightweight premium carbon-fiberglass composite shell engineered to deliver a balance of strength, weight reduction, and impact protection. Composite shell construction combines the structural properties of carbon and fiberglass materials, helping minimize unnecessary helmet mass while maintaining protection required by Snell SA2025 certification. Reduced helmet weight can help improve driver comfort during extended racing sessions, especially when subjected to repeated braking, cornering, vibration, and high-speed forces. Inside the shell, Bell uses an advanced multi-density, multi-piece impact liner engineered to manage impact energy across a range of racing conditions. This combination gives the XD7 PRO professional racing helmet construction with the versatility required for demanding dirt track and open-wheel motorsport. Advanced Venturi Ventilation System for Dirt Track Racing One of the defining features of the Bell XD7 PRO is its redesigned Venturi ventilation system. Unlike conventional ventilation arrangements that primarily rely on forward-facing intake openings, the XD7 PRO incorporates strategically positioned rear-facing chin bar vents and extraction ports designed to encourage airflow while helping reduce dust entering the helmet. The system uses airflow moving around the helmet to support ventilation and extraction, helping drivers remain comfortable in demanding dirt track racing environments. Additional upper chin bar ventilation and adjustable upper air intake openings allow drivers to manage airflow according to track conditions and personal preferences. The XD7 PRO's ventilation system is especially beneficial for dirt oval, sprint car, midget, and other motorsport applications where dust, heat, and ventilation are important concerns. Optical-Grade SE07 Double Screen Anti-Fog Shield The Bell XD7 PRO is equipped with an optical-grade SE07 3mm Double Screen Anti-Fog (DSAF) shield designed to provide reliable visibility during demanding racing conditions. Double Screen Anti-Fog technology helps reduce condensation when cockpit temperature and humidity change, allowing drivers to maintain better visibility during extended track sessions. The XD7 PRO uses Bell's SE07 shield platform and compatible SV(SE07) pivot hardware. This system provides access to compatible replacement shields, tear-off accessories, and replacement hardware for maintaining the helmet throughout the racing season. Important for drivers upgrading from the GTX3: The XD7 PRO uses the SE07 shield platform rather than the previous GTX3 SE03 system. Older SE03 shields, tear-offs, and pivot components should not be assumed compatible. Bell Racing SmartLock Shield Mechanism The XD7 PRO incorporates Bell Racing's SmartLock mechanism, engineered to provide secure shield retention under demanding racing conditions. SmartLock helps maintain reliable shield closure while allowing the driver to operate the shield when needed. A synthetic rubber gasket surrounds the eyeport to help create a protective seal against unwanted air, water, and dust intrusion. Combined with the SE07 DSAF shield, this arrangement provides dependable visibility and shield performance for high-speed motorsport applications. Engineered for Dirt Track and Open-Wheel Competition The Bell XD7 PRO is designed for drivers competing in racing environments where aerodynamic efficiency, airflow management, and protection against dirt and debris are essential. Its GTX3-inspired design incorporates modern ventilation engineering and an aerodynamic composite shell to meet the needs of demanding motorsport competition. The rear-facing ventilation design is particularly useful in dirt racing applications where forward-facing air intakes can be exposed to significant dust and debris. Typical applications include: Dirt Track and Dirt Oval Racing Sprint Car Racing Midget Racing Open-Wheel Racing Oval Track Competition Other Sanctioned Auto Racing Applications Allowing Snell SA2025 Helmets Integrated Communication and Hydration Compatibility The Bell XD7 PRO includes integrated accessory channels in the facepiece to support compatible racing radio systems and driver hydration equipment. These internal routing provisions allow optional microphone wiring, drinking tubes, and related equipment to be installed without unnecessarily interfering with helmet fit. For drivers who depend on reliable pit communication, compatible radio accessories can be installed using the helmet's interior routing features. Optional hydration equipment is especially useful during longer racing events and in hot environments where maintaining fluid intake is important. Note: Communication systems, microphones, radio electronics, drinking tubes, and hydration kits are sold separately. Factory-Installed HANS Anchors The Bell XD7 PRO comes equipped with factory-installed HANS anchors as standard equipment. These mounting posts allow connection to compatible frontal head restraint systems without requiring separate helmet anchor installation. Drivers should verify compatibility with their head and neck restraint equipment and follow all applicable racing organization safety requirements. Fire-Resistant Interior and Customizable Comfort The XD7 PRO features a dark grey high-strength, high-comfort fire-resistant interior designed for extended use in motorsport environments. The helmet's advanced impact liner works with the interior fit padding to provide secure, consistent contact around the driver's head. Compatible Bell interior accessory kits are available to configure the helmet with ear cups or cheek pads depending on driver preference and communication requirements. Alternative interior colors may also be available by special order through Bell Racing. Proper helmet fit is essential. Measure your head circumference and select the appropriate size according to Bell's sizing recommendations. Bell XD7 PRO Racing Helmet Technical Specifications Manufacturer: Bell Racing Helmets Model: XD7 PRO Helmet Series: Bell Pro Series Helmet Type: Full-Face Racing Helmet Snell Certification: SA2025 FIA 8859-2024 Certification: Not Listed for XD7 PRO Shell Material: Premium Carbon-Fiberglass Composite Impact Liner: Advanced Multi-Density, Multi-Piece Construction Shield: Optical-Grade Double Screen Anti-Fog Shield Type: SE07 3mm Pivot Hardware: Bell SV(SE07) Shield Retention: Bell Racing SmartLock Ventilation: Venturi System With Rear-Facing Chin Bar Vents and Extraction Ports Adjustable Upper Vents: Yes Eyeport Seal: Synthetic Rubber Gasket Interior: Dark Grey Fire-Resistant Comfort Fabric Interior Configuration: Compatible Ear Cup and Cheek Pad Accessory Kits HANS Anchors: Factory Installed Communication Ready: Yes, With Optional Equipment Hydration Compatible: Yes, With Optional Equipment Available Colors: White and Matte Black Available Sizes: 57, 58, 59, 60, 61, 61+ Primary Application: Dirt Track, Sprint Car, Midget, Open-Wheel, and Oval Racing Quantity: Sold Individually Bell XD-7 Pro Helmet Size Chart Bell XD7 PRO Helmet Care and Maintenance Regular cleaning and maintenance help keep the Bell XD7 PRO performing properly throughout the racing season. Exterior Care: Clean the composite shell using a soft microfiber cloth and products approved for automotive helmet finishes. Avoid aggressive chemicals, solvents, and abrasive cleaning materials. Shield Care: Clean the SE07 DSAF shield using appropriate non-abrasive cleaning products. Inspect the shield regularly for scratches or damage that may affect visibility. Ventilation Maintenance: Check rear-facing chin bar vents, upper air intakes, and extraction openings for accumulated dirt or debris after racing in dusty environments. Interior Care: Gently clean the interior fit padding according to Bell Racing's recommendations. Avoid excessive moisture and allow the helmet to dry completely before storage. Inspection: Check the helmet shell, chin strap, shield mechanism, HANS anchors, and ventilation components before every event. Storage: Store the helmet in a clean, cool, dry environment away from direct sunlight, excessive heat, and chemical exposure. Bell XD7 PRO Racing Helmet FAQs Is the Bell XD7 PRO Snell SA2025 certified?Yes. The Bell XD7 PRO carries Snell SA2025 certification for applicable automotive racing applications. Is the Bell XD7 PRO FIA 8859-2024 certified?No. Bell lists the XD7 PRO as Snell SA2025 certified. Drivers requiring FIA 8859-2024 homologation should consider the separate XD7 ULTRA, which carries both certifications. What helmet does the XD7 PRO replace?The XD7 PRO is the next-generation successor to Bell Racing's popular GTX3 helmet. What is the difference between the Bell XD7 PRO and XD7 ULTRA?The XD7 PRO features a premium carbon-fiberglass composite shell and Snell SA2025 certification. The XD7 ULTRA uses an ultra-lightweight carbon shell and carries both Snell SA2025 and FIA 8859-2024 homologations. Is the XD7 PRO suitable for dirt track racing?Yes. The helmet's Venturi ventilation system and rear-facing chin bar vents are designed to help manage airflow while reducing dust intrusion during dirt racing. What is the Venturi ventilation system?The system uses strategically positioned rear-facing vents and extraction openings to promote air exchange while helping reduce the amount of dust entering the helmet. Does the Bell XD7 PRO have adjustable ventilation?Yes. The helmet features adjustable upper air intake vents along with strategically positioned chin bar ventilation and extraction openings. Does the XD7 PRO come with an anti-fog shield?Yes. The helmet features an optical-grade SE07 3mm Double Screen Anti-Fog shield. Will my old Bell GTX3 shields fit the XD7 PRO?No. The XD7 PRO uses the SE07 shield system, replacing the older GTX3 SE03 platform. Purchase compatible SE07 shields, tear-offs, and pivot hardware. Does the Bell XD7 PRO include HANS anchors?Yes. Factory-installed HANS anchors are included as standard equipment. Can I install a racing radio system?Yes. Integrated channels accommodate compatible optional microphones, radio equipment, and related communication accessories. Can I install a hydration system?Yes. The helmet supports compatible drinking tubes and hydration systems through integrated facepiece channels. Can I customize the helmet interior?Yes. Compatible interior accessory kits are available for ear cup and cheek pad configurations. What sizes are available?Bell offers the XD7 PRO in sizes 57, 58, 59, 60, 61, and 61+. What colors are available?The XD7 PRO is available in White and Matte Black, subject to inventory availability. Is the XD7 PRO suitable for sprint car racing?Yes. Its dirt-oriented ventilation, advanced composite construction, and Snell SA2025 certification make it suitable for sprint car competition when approved by the applicable racing organization. Next-Generation Dirt Racing Performance With Bell XD7 PRO The Bell XD7 PRO SA2025 Racing Helmet combines the proven heritage of the GTX3 with modern composite construction, advanced impact protection, and specialized Venturi ventilation technology. With its SE07 Double Screen Anti-Fog shield, SmartLock mechanism, factory-installed HANS anchors, and integrated communication and hydration compatibility, the XD7 PRO delivers the features serious dirt track and open-wheel racers demand. Choose the Bell XD7 PRO for dependable Snell SA2025 protection, optimized ventilation, and race-ready comfort.

Bell HP77 Oscar Piastri 1:2 Mini Helmet McLaren 2025 Formula One Season Bell teamed up with Formula 1 star Oscar Piastri to create this 1:2 scale replica special edition Mini Helmet featuring Oscar Piastri and McLaren livery for the 2025 F1 season. Oscar is part of the reborn McLaren Formula 1 team looking to get back where they belong: at the front of the grid. This meticulously-crafted replica, at a scale of 1:2, faithfully captures the essence of Piastri's original helmet. Using high-tech components, the shell, interior, and visor are made with similar materials to the real racing helmet. Working closely with Oscar, Bell's paint team ensured the graphics and signature elements closely match his actual F1 helmet. Show your support for Oscar Piastri and McLaren with this new replica helmet from Bell! Note: this is a replica helmet for display purposes only and is not certified for any type of motorsport use.

Bell 1:2 Scale Alex Albon 2024 Williams F1 Mini Helmet Celebrate Alex Albon’s 2024 Formula 1 season with this officially licensed Bell 1:2 Scale Mini Helmet. This exact half-scale replica of Albon’s Bell HP77 race helmet faithfully reproduces the design he wore throughout the 2024 F1 World Championship while driving for Williams Racing. Crafted by Bell Racing Helmets using the same manufacturing processes as full-size helmets, this collectible delivers unmatched authenticity, detail, and display quality. It’s a standout piece for any Formula 1 collection and the perfect way to honor one of the sport’s most exciting drivers. Key Features Accurate 1:2 Scale Replica: Recreates Alex Albon’s 2024 Williams F1 Bell HP77 helmet with precise graphics and colors. Premium Construction: Manufactured by Bell using similar materials and processes as real F1 helmets. Ideal Display Size: Perfect for desks, shelves, offices, and display cases. Collector Packaging: Presented in a premium display box—excellent for gifting or preservation. Official F1 Collectible: A must-have for Alex Albon fans, Williams Racing supporters, and Formula 1 memorabilia collectors. Technical Details Half-scale replica of the Bell HP77 helmet used by Alex Albon in the 2024 season. Manufactured with the same process Bell uses for full-size racing helmets. Dimensions Helmet: 6.3 x 4.7 x 4.3 in Box: 7 x 5.5 x 5.3 in Weight: 1.1 lbs Manufacturer Part Number: 4100313 Note: this is a replica helmet for display purposes only and is not certified for any type of motorsport use.

Bell HP77 Fernando Alonso 2025 Mini Bell Helmet Replica 1:2 The Bell HP77 Fernando Alonso 2025 Mini Helmet is a stunning 1:2 scale replica of the helmet worn by Alonso during the 2025 Formula One season. Handcrafted by Bell Racing Helmets in the same factory as the full-size HP77 race helmets, this collector’s piece perfectly captures the precision, design, and flair of Aston Martin Aramco Formula One team. Precision Replica of the 2025 Fernando Alonso Helmet Each Bell 1:2 scale mini helmet is crafted using premium materials, mirroring the shell structure, visor design, and internal padding of the full-scale original. Produced under the guidance of Bell’s top engineers, these replicas showcase the same attention to aerodynamics, safety design, and finish that define the real HP77 helmet. Features Scale: 1:2 Crafted by Bell Racing Helmets for Aston Martin Aramco F1 Shell Material: 77% Fibre Reinforced Plastic Interior: 15% Cotton Fabric + Foam Hardware: 8% Metal Components Weight: 0.5 kg Dimensions: 180mm (W) x 140mm (H) x 135mm (D) Bell HP77 Fernando Alonso 2025 Mini Bell Helmet FAQs: Is this the same design Fernando Alonso wore during the 2025 F1 season? Yes, this mini helmet replicates the exact 2025 season design worn by Fernando Alonso while driving for Aston Martin Aramco. Is the Bell HP77 Mini Helmet officially licensed? Absolutely. It’s officially licensed by the Aston Martin Aramco Formula One Team and produced by Bell Racing Helmets. Can the visor be opened or adjusted? The visor is fixed for display purposes, designed to maintain structural integrity and an authentic look. Does the helmet come with a display case or box? Yes, each helmet includes a custom-designed collector’s box for safe storage and presentation. What materials are used to make the helmet? The helmet combines fibre-reinforced plastic, cotton fabric with foam interior, and metal components—mirroring the composition of the full-scale HP77. Celebrate the speed, precision, and craftsmanship of Formula One with this Bell HP77 Fernando Alonso 2025 Mini Helmet Replica.

Bell 1:2 Scale Carlos Sainz 2025 Williams F1 Mini Helmet Celebrate Carlos Sainz’s debut season with Williams Racing with this officially licensed Bell 1:2 Scale Mini Helmet. Designed for the 2025 Formula 1 World Championship, this replica captures the exact look of Sainz’s Bell HP77 race helmet—complete with Spanish flag colors, Williams blue accents, the iconic chili pepper emblem, and a star honoring María de Villota. Crafted by Bell Racing Helmets using the same manufacturing process as full-size race helmets, this premium collectible delivers exceptional detail, authenticity, and display quality. It’s the perfect centerpiece for any F1 collection and a must-have for Carlos Sainz or Williams Racing fans. Key Features Authentic 1:2 Scale Replica: Precisely reproduces Carlos Sainz’s 2025 Williams Racing Bell HP77 helmet graphics and design. Premium Construction: Built with high-quality materials for durability and a true motorsport look and feel. Perfect Display Size: Ideal for shelves, desks, offices, or display cases. Collector Presentation: Packaged in an attractive display box—excellent for gifting or preservation. Limited Edition: Exclusive 2025 collectible celebrating Sainz’s first season with Williams. Technical Details Half-scale reproduction of the Bell HP77 with Carlos Sainz’s 2025 Williams F1 helmet livery. Manufactured by Bell using the same processes as full-size racing helmets. Materials: 77% Fiber Reinforced Plastic (recyclable), 15% cotton fabric & foam, 8% hardware. Dimensions Helmet: 6.49 x 5.07 x 5.19 in (16.5 x 12.9 x 13.2 cm) Box: 180 x 135 x 140 mm Weight: 13 oz / 355 g (with packaging) For display only. Not suitable for racing or protective use. Manufacturer Part Number: 4100420 Competition Motorsport | sales@competitionmotorsport.com | (844) 438-7244

CMS Performance Ultimate Race Seat Mounting Kit This Kit Fits the Following Vehicles: BMW E46 M3 (2001-2006) BMW E46 3-SERIES (1999-2005) Introducing Our Complete Race Seat Mounting Kit: The Ultimate Upgrade for Motorsports Enthusiasts! Are you a racing or track-day aficionado looking to upgrade your on-track safety and performance? Look no further than the CMS Performance Ultimate Racing Seat Mounting Kit. One of the very best upgrades you can make for driving your BMW on the race track is adding a dedicated racing seat. CMS Performance designed this kit to give you a complete solution to installing your choice of seat in your BMW. No mixing-and-matching, hunting for parts and wondering whether it'll all work together. The CMS Performance Ultimate Race Seat Mounting Kit has everything you need! Precision Engineering for BMW Excellence The CMS Performance Ultimate Race Seat Mounting Kit is precision- engineered, tailor-made to fit a variety of race seats safely and securely in your BMW. Crafted with meticulous attention to detail from 3/16" carbon steel, this kit draws on our many years of experience with track-prepped BMWs. Let CMS Performance help you unlock the full potential of your high-performance BMW on the race track. Custom Powder Coat to Match Your BMW The CMS Performance Ultimate Race Seat Mounting Kit comes standard in a durable satin black finish powder coat. CMS Performance can also custom powder-coat your kit in just about any BMW OEM paint color you like. Simply choose "Custom Color" in the dropdown above and specify the BMW color you want in your Order Notes at check-out. See Assembly Instructions Here CMS Performance Ultimate Race Seat Mounting Kit Includes: Mounting base w/ integrated sub strap bar (bolts securely to factory BMW seat mounting holes) Two steel side-mount race seat brackets All necessary hardware (Grade 8) Detailed installation instructions Optional: high-performance race seat slider Key Features of This Kit: Race-Ready Compatibility: Designed to seamlessly integrate with a wide range of racing seats from Sparco, OMP, Racetech and Sabelt. Our mounting kit ensures a perfect fit on the driver and/or passenger side of your BMW. CMS Performance has you covered. Fully Integrated: The CMS Performance kit includes everything you need to install a racing seat in your BMW. No mixing-and-matching, so you can spend less time installing and more time racing. Lightweight Durability: Constructed from premium materials, our kit prioritizes strength without compromising on weight. The integrated design puts a premium on maintaining structural integrity. Customization Options: Tailor your installation to perfection with multiple options, including racing sliders and custom powder-coat colors. Enhanced Safety: Safety is paramount in motorsports, and our kit doesn't cut corners. It's designed to meet or exceed industry safety standards, keeping you protected during the most demanding races. Quick and Easy Installation: The CMS Performance Ultimate Race Seat Mounting Kit is engineered for straightforward installation and precise fitment. Not included: CMS Performance roll bar and race seats are available separately. Seat mounting kit is shown with optional Recaro seat slider.