all

Sparco Advanced Thunder Kart Racing Suit FIA 8877-2022 Certified Safety, Comfort and Style The Sparco Thunder Advanced Kart Racing Suit delivers professional-grade protection, bold styling, and all-day comfort for racers at every level. Certified to the latest FIA 8877-2022 Grade 1 homologation, the Thunder Advanced provides the safety demanded by serious competitors, while remaining breathable and mobile enough for long, grueling sessions on the track. Constructed from lightweight, abrasion-resistant Cordura, this suit includes strategic stretch panels, mesh inserts, and pre-curved arms for maximum freedom of movement. Internally, soft cotton terry lining enhances comfort, while underarm and thigh vents help regulate body temperature during intense races. The Thunder’s ergonomic fit and half-floating sleeves reduce fatigue and let you focus on your performance. Make A Statement at the Kart Track The Sparco Thunder Advanced doesn’t just perform—it also makes a statement. Now available in seven new colorways, it features a lowered collar, contrast accents, and Sparco’s signature epaulettes. Side pockets and an adjustable belt add practical touches, while the elasticated back panel ensures a tailored fit in and out of the kart. Offered at an exceptional value, the Thunder Advanced brings premium features typically found in higher-end suits. Whether you're a beginner or a championship contender, this FIA-certified suit is a reliable investment in performance and protection. Available now at Discovery Parts, with expert sizing support and fast shipping. Features and Benefits of the Sparco Thunder Advanced Kart Suit FIA 8877-2022 Grade 1 Approval: This suit meets stringent FIA standards, ensuring you have reliable protection during races, giving you peace of mind when you're on the track so you can focus on what matters most, winning. Two-Layer Abrasion-Resistant Cordura Material: The durable fabric is designed to keep you safe so you can focus on performance. Large Rear Stretch Panel: The stretch panel at the back enhances comfort and fit in the seated position, allowing for better mobility and less restriction while driving. Perforated Stretch Panels: Located in the armpits and inner leg, these panels improve breathability and cooling, helping you maintain optimal body temperature during intense races. Semi-Floating Sleeves and Pre-Curved Arms: These features improve the overall fit of the suit, allowing for greater freedom of movement and enhanced comfort, particularly in a driving position. Ribbed Neck and Concealed Zip: The ribbed neck offers added comfort while the concealed zip provides a sleek look, contributing to a professional appearance on the track. Sparco Thunder Advanced Karting Suit Technology Elasticized back panel Lowered collar Breathable inserts on inner thigh and underarm Belt Side pockets FIA 8877-2022 Grade 1 approved Sparco Thunder Advanced Karting Suit Sizing Frequently Asked Questions (FAQ) – Sparco Thunder Advanced Kart Racing Suit What is the difference between a kart suit and an auto racing suit?A kart racing suit like the Sparco Advanced Thunder is specifically engineered for karting and focuses on abrasion resistance rather than fire protection. Since karting involves low fire risk, FIA kart suits like this one are not fire-retardant. In contrast, auto racing suits are constructed with flame-resistant materials and carry FIA or SFI fire certifications for use in motorsports involving fuel and fire hazards. Where are Sparco suits made?Sparco kart racing suits, including the Advanced Thunder, are proudly designed and manufactured in Italy. With a reputation built on precision engineering, Italian craftsmanship, and motorsport innovation, Sparco remains one of the most trusted names in racing gear across the globe. What is the Sparco Thunder Advanced kart racing suit?The Sparco Advanced Thunder is a high-performance FIA 8877-2022 Grade 1 kart suit designed for competitive kart racers seeking exceptional comfort, protection, and mobility. With a modern ergonomic cut, breathable mesh panels, and lightweight multi-layer construction, it's built to meet the demands of high-level racing while maintaining full FIA compliance. What is the Sparco Thunder Advanced made of?This lightweight kart suit is crafted with abrasion-resistant outer layers, internal mesh lining for breathability, and elastic stretch panels for optimal flexibility. The materials are selected to reduce fatigue, increase airflow, and provide a race-ready fit without compromising safety. Is the Sparco Thunder Advanced FIA certified?Yes. The Advanced Thunder is homologated to the latest FIA 8877-2022 Grade 1 kart suit standard, ensuring it meets the safety and durability requirements for national and international karting competitions. It’s fully approved for FIA-sanctioned events worldwide. Is this a lightweight kart suit?Yes. The Sparco Advanced Thunder is a true lightweight kart suit, designed to deliver maximum performance with reduced bulk. Its breathable and flexible design helps drivers stay cool and agile throughout intense race sessions. Who is the Sparco Thunder Advanced ideal for?This suit is ideal for serious kart racers of all levels—whether you're competing in junior, senior, or master classes. It’s designed for drivers who need a race-legal suit that combines FIA-certified protection, high-performance materials, and lasting comfort for extended use on track. Why choose Sparco for karting gear?Sparco kart racing suits are known for blending high-performance materials with race-proven functionality and Italian style. With a legacy rooted in professional motorsports, Sparco continues to deliver premium suits for drivers who demand the very best in safety, comfort, and design.

Sabelt Hypertouch TG-12 Auto Racing Gloves The Sabelt Hypertouch TG-12 Auto Racing Gloves combine certified fire-resistant protection, dependable steering-wheel grip, touchscreen compatibility, and an updated ergonomic fit. Designed for competitive motorsport, the TG-12 gives drivers the control and comfort needed for racing, endurance events, track days, and performance driving. A silicone-infused palm helps provide a secure connection with the steering wheel, while the reinforced internal palm improves durability in high-contact areas. Touchscreen-compatible fingertips allow drivers to operate compatible phones, lap-timing applications, and data-acquisition displays without removing their gloves. Certified to the FIA 8856-2018 standard, the Sabelt Hypertouch TG-12 is suitable for racing organizations and events that require current FIA-approved driver equipment. Silicone Palm for Enhanced Steering-Wheel Grip The TG-12 features silicone grip material across the palm to improve traction against the steering wheel. This surface helps the driver maintain a consistent grip during braking, cornering, shifting, and rapid steering inputs. Improved palm traction can also reduce the amount of gripping pressure required to control the wheel, helping minimize hand fatigue during longer driving sessions. Touchscreen-Compatible Fingertips Touchscreen-compatible fingertips allow the driver to operate compatible electronic devices without removing the gloves. This feature is useful when adjusting data-acquisition equipment, reviewing lap times, operating mobile applications, or using a phone between sessions. Touchscreen performance may vary depending on the device, screen protector, and operating conditions. Reinforced Internal Palm A strengthened internal palm improves durability in areas exposed to frequent contact with the steering wheel. The reinforced construction helps the glove withstand repeated use while maintaining the flexibility and steering feedback required for precise vehicle control. Updated Ergonomic Fit Sabelt designed the Hypertouch TG-12 with an updated fit that follows the natural shape of the hand. The close-fitting construction helps reduce excess material and improves dexterity when operating paddle shifters, steering-wheel controls, switches, and other cockpit equipment. The extended gauntlet-style cuff provides dependable coverage and overlap with the sleeve of a compatible racing suit. Streamlined Racing Design The TG-12 features a clean, low-profile design developed for performance driving. Its shaped fingers, extended cuff, and flexible construction provide a secure racing fit without unnecessary bulk. Distinctive Sabelt branding and contrasting graphics give the gloves a professional appearance that coordinates with a wide range of racing suits and driver equipment. FIA 8856-2018 Approved Racing Protection The Sabelt Hypertouch TG-12 is homologated to the FIA 8856-2018 standard for protective clothing used in automobile competition. This certification makes the gloves appropriate for many professional, amateur, endurance, rally, road-racing, and club-level motorsport applications. Drivers should always confirm the required certification with their racing organization or sanctioning body before competition. Sabelt Hypertouch TG-12 Features Fire-resistant auto-racing glove construction FIA 8856-2018 homologated Silicone-infused palm for enhanced steering-wheel grip Touchscreen-compatible fingertips Reinforced internal palm for improved durability Updated ergonomic fit Close-fitting design improves dexterity and control Extended gauntlet cuff provides racing-suit overlap Designed for competitive and performance driving Available in multiple colors and sizes Sabelt Hypertouch TG-12 Specifications Manufacturer: Sabelt Model: Hypertouch TG-12 Product Type: Auto Racing Gloves Homologation: FIA 8856-2018 Available Sizes: 8–12 Available Colors: Black, Red, and White Manufacturer SKU: RFTG12 Ideal for Multiple Motorsport Applications The Sabelt Hypertouch TG-12 Racing Gloves are suitable for a variety of motorsport disciplines, including: Circuit racing Endurance racing Sports-car competition Touring-car racing Rally and time trials Autocross Driver instruction High-performance track driving Why Choose Sabelt Hypertouch TG-12 Racing Gloves? The Sabelt Hypertouch TG-12 provides a balanced combination of certified protection, steering-wheel grip, touchscreen functionality, durability, and comfort. Its silicone palm improves control, while the reinforced internal construction helps the gloves withstand repeated racing use. For drivers seeking an FIA-approved racing glove with modern touchscreen convenience and a close, responsive fit, the TG-12 is a strong choice for both short sprint races and extended driving sessions. Sabelt Hypertouch TG-12 Size Chart Frequently Asked Questions How should the Sabelt Hypertouch TG-12 Racing Gloves fit?The gloves should fit closely around the hands and fingers without restricting movement. There should not be excessive material at the fingertips or uncomfortable pressure across the palm. Are the Sabelt Hypertouch TG-12 Gloves FIA approved?Yes. The TG-12 is homologated to the FIA 8856-2018 standard for protective clothing used in automobile competition. Do the Sabelt TG-12 Gloves work with touchscreen devices?Yes. The gloves include touchscreen-compatible fingertips for operating compatible phones, lap timers, and data-acquisition equipment. What type of grip material is used on the palm?The TG-12 uses silicone grip material to improve traction and control against the steering wheel. Does the TG-12 have a reinforced palm?Yes. The internal palm is strengthened to improve durability in areas exposed to frequent steering-wheel contact. What sizes are available?The Sabelt Hypertouch TG-12 is available in sizes 8 through 12. What colors are available?Available color options include Black, Red, and White. Are these gloves suitable for endurance racing?Yes. The close fit, silicone palm grip, reinforced construction, and FIA-approved protection make the TG-12 suitable for endurance racing and other extended driving sessions. Can the Sabelt TG-12 Racing Gloves be washed?Follow the care instructions supplied by Sabelt. Avoid bleach, harsh detergents, high heat, and cleaning methods that could damage the fire-resistant materials or silicone grip surface.

Alpinestars Graphic 2 Engineered for precision and comfort in virtual racing The Alpinestars Graphic 2 Sim Racing Gloves are purpose-built for virtual racers demanding professional-grade control, precision, and comfort. Designed with feedback from top Sim drivers around the world, these gloves deliver the feel and responsiveness needed to perform at your peak during every session — whether you’re running an endurance race or perfecting lap times on your favorite circuit. Features Developed specifically for Sim racing with input from elite eSports and virtual racing professionals to meet the evolving demands of the Sim community. Lightweight, stretchable bonded textile construction provides maximum comfort, adaptability, and natural steering feedback during long sessions. Supremely soft Nanofront® palm fabric delivers exceptional tactile sensitivity, allowing precise throttle, brake, and steering inputs. Large perforations across the back of the hand, paired with smaller palm and finger perforations, promote optimal airflow and minimize sweat buildup. Elastic wrist cuff ensures a snug, secure fit while maintaining easy entry and removal. Bold printed graphics reflect Alpinestars’ racing heritage, combining professional aesthetics with advanced performance engineering. FAQs: Alpinestars Graphic 2 Are these gloves made for real racing or Sim use? These gloves are designed specifically for Sim racing, providing exceptional comfort, breathability, and control for long virtual racing sessions. Do they work with all Sim wheels and setups? Yes, the gloves are optimized for a wide range of steering wheels, including Alcantara, suede, and leather finishes. What makes the Nanofront® palm fabric special? The Nanofront® material offers superior grip, sensitivity, and feedback compared to traditional Sim gloves, improving fine control during driving. Are they breathable for long races? Absolutely. The perforated design ensures excellent ventilation, keeping your hands cool and comfortable even during endurance events. The Alpinestars Graphic 2 Sim Racing Gloves combine the brand’s motorsport DNA with next-generation materials, giving virtual racers the perfect blend of comfort, feedback, and control. Whether you're chasing podiums in iRacing or fine-tuning your technique in Assetto Corsa, these gloves deliver championship-level performance for your setup.

Sabelt Challenge Evo TG-2.2 Racing Gloves  The Sabelt Challenge Evo TG-2.2 Racing Gloves combine FIA-certified fire protection, dependable steering-wheel grip, and lightweight comfort for competitive motorsport use. Their durable aramid-fiber construction provides protection without excessive bulk, while the advanced silicone palm improves control and tactile feedback. Designed for wheel-to-wheel racing, endurance events, time attack, autocross, and performance track driving, the Challenge Evo TG-2.2 helps drivers maintain a secure connection with the steering wheel during braking, cornering, shifting, and rapid directional changes. The close racing fit supports natural hand movement and precise cockpit control, making these gloves a practical choice for drivers who need modern protection and consistent grip throughout demanding sessions. Advanced Silicone Palm Grip The palm features strategically applied silicone grip material designed to improve traction against the steering wheel. This high-grip surface helps reduce unwanted hand movement during aggressive steering inputs, heavy braking, and high-load cornering. The low-profile silicone pattern preserves steering feedback and allows the driver to maintain control without applying excessive gripping pressure. This can help reduce hand fatigue during longer races and repeated track sessions. High-Strength Aramid-Fiber Construction The Sabelt Challenge Evo TG-2.2 is constructed from durable fire-resistant aramid fiber. This lightweight material provides the protection required for motorsport competition while maintaining flexibility and comfort. The streamlined construction minimizes unnecessary bulk around the fingers and palm, supporting precise operation of paddle shifters, steering-wheel controls, switches, and other cockpit equipment. Lightweight Racing Fit The close anatomical fit allows the glove to move naturally with the hand. Reduced material around the fingers helps improve dexterity and prevents excessive bunching while gripping the steering wheel. This lightweight design is especially valuable during endurance racing, extended HPDE sessions, and other applications where comfort and control must remain consistent over time. Enhanced Steering-Wheel Feedback The combination of a thin palm construction and strategically positioned silicone grip provides clear feedback from the steering wheel. Drivers can better feel changes in grip, vibration, and steering load without sacrificing secure contact. This responsive feel supports more precise corrections and smoother control during demanding track conditions. Durable Printed Sabelt Graphics Printed Sabelt logos provide clean professional styling while maintaining the lightweight construction of the glove. The graphics complement the streamlined design without adding unnecessary layers or bulk. FIA 8856-2018 Certified Protection The Sabelt Challenge Evo TG-2.2 Racing Gloves are approved to the FIA 8856-2018 standard for protective clothing used in automobile competition. This certification makes them suitable for many professional, amateur, club-level, endurance, rally, and road-racing applications. Drivers should confirm the required glove certification and homologation date with their racing organization or sanctioning body before competition. Sabelt Challenge Evo TG-2.2 Racing Glove Features Fire-resistant auto-racing glove construction FIA 8856-2018 approved High-strength aramid-fiber material Advanced silicone palm grip Enhanced steering-wheel traction and control Responsive tactile feedback Lightweight construction helps reduce hand fatigue Close racing fit supports natural hand movement Low-profile palm preserves steering feel Printed Sabelt graphics Designed for competitive motorsport use Available in sizes 8 through 12 Sabelt Challenge Evo TG-2.2 Racing Glove Specifications Manufacturer: Sabelt Model: Challenge Evo TG-2.2 Product Type: Auto Racing Gloves Material: Fire-resistant aramid fiber Palm: Silicone-enhanced grip surface Available Sizes: 8–12 Homologation: FIA 8856-2018 Part Number: RFTG22RS12 Why Choose Sabelt Challenge Evo TG-2.2 Racing Gloves? The Challenge Evo TG-2.2 combines modern FIA-certified protection with the grip and sensitivity required for precise vehicle control. Its aramid construction offers dependable fire resistance, while the silicone palm provides confident steering-wheel traction. The lightweight fit helps reduce fatigue and preserves dexterity during long sessions. For drivers seeking a straightforward, competition-ready racing glove with excellent feedback and dependable grip, the Sabelt Challenge Evo TG-2.2 is a strong choice. Sabelt Challenge Evo TG-2.2 Nomex Glove Size Chart Frequently Asked Questions Are the Sabelt Challenge Evo TG-2.2 Gloves FIA approved?Yes. The gloves are approved to the FIA 8856-2018 standard for protective clothing used in automobile competition. What material are the gloves made from?They are constructed from durable fire-resistant aramid fiber. What is the benefit of the silicone palm?The silicone surface improves steering-wheel grip and helps reduce slippage while preserving tactile feedback. How should the Sabelt Challenge Evo TG-2.2 Gloves fit?They should fit closely around the hands and fingers without restricting movement or creating uncomfortable pressure at the fingertips. What sizes are available?The Sabelt Challenge Evo TG-2.2 Racing Gloves are available in sizes 8 through 12. Are these gloves suitable for endurance racing?Yes. Their lightweight construction, close fit, and silicone palm grip make them suitable for extended driving sessions. Can these gloves be used for track days?Yes. They are suitable for competitive racing, HPDE, time attack, autocross, driver instruction, and performance track driving. Do the gloves provide good steering-wheel feedback?Yes. The low-profile palm construction and silicone grip are designed to preserve steering sensitivity while providing secure traction. What is the part number?The listed part number is RFTG22RS12.

OMP Sport Gloves FIA 8856-2018 The OMP Sport Gloves provide modern FIA-certified protection, dependable steering-wheel grip, and lightweight comfort at an accessible price. Designed for drivers who need certified fire-resistant gloves without unnecessary bulk, the OMP Sport combines a silicone-printed palm, flexible construction, and an elastic wrist opening for a secure, straightforward fit. Certified to FIA 8856-2018, these gloves are built for competitive motorsport while remaining comfortable enough for extended driving sessions. Multiple color options make it easy to coordinate the OMP Sport Gloves with your racing suit, shoes, helmet, or team colors. Lightweight Fire-Resistant Racing Gloves The OMP Sport is designed to provide essential protection without making the glove feel heavy or restrictive. Its lightweight fire-resistant construction allows natural finger movement and helps reduce hand fatigue during longer sessions. The streamlined design also minimizes unnecessary material between the driver and the steering wheel, supporting clear feedback and precise control. Silicone-Printed Palm Grip A silicone grip pattern is printed directly onto the palm to improve traction against the steering wheel. The low-profile application provides a secure hold without adding the thickness of a separate reinforcement layer. The printed silicone helps the driver maintain consistent control during braking, cornering, shifting, and repeated steering corrections while preserving sensitivity through the wheel. Reliable Grip as Temperatures Rise Steering wheels and cockpit surfaces can become warm during extended sessions. The silicone-printed palm helps maintain traction as temperatures increase, reducing the need to squeeze the wheel excessively. A more relaxed grip can improve comfort and help the driver maintain smoother steering inputs over the course of a race or track session. Elastic Wrist Entry An elasticated wrist opening makes the OMP Sport Gloves easy to put on and remove while maintaining a snug fit once worn. The strapless design avoids bulky closures and allows clean overlap with a compatible racing suit sleeve. The elastic wrist also helps prevent the glove from shifting during aggressive steering inputs or rapid cockpit movements. Comfort for Extended Driving Sessions The OMP Sport Gloves are shaped to remain comfortable during prolonged use. Their lightweight materials and uncomplicated construction allow the hand to flex naturally around the steering wheel, shifter, and cockpit controls. The glove’s close fit helps reduce excess material at the fingertips and palm, improving dexterity without sacrificing fire-resistant coverage. FIA 8856-2018 Homologated Protection The OMP Sport Gloves are certified to the FIA 8856-2018 homologation standard for protective clothing used in automobile competition. This certification makes them suitable for racing organizations and events that require current FIA-approved fire-resistant driver gloves. Drivers should confirm the specific equipment rules of their sanctioning organization before competition. OMP Sport Nomex Glove Features Lightweight fire-resistant racing glove construction Silicone-printed palm provides dependable steering-wheel grip Low-profile grip pattern preserves steering sensitivity Elastic wrist allows easy entry and secure retention Strapless design reduces bulk beneath the racing suit sleeve Comfortable construction for extended driving sessions Available in multiple color options FIA 8856-2018 homologated OMP Sport Racing Glove Specifications Manufacturer: OMP Model: Sport Product Type: Fire-Resistant Auto Racing Gloves Palm: Silicone-printed grip Wrist: Elasticated entry Closure: Strapless Construction: Lightweight fire-resistant material Homologation: FIA 8856-2018 Accessible FIA-Certified Performance The OMP Sport focuses on the features drivers need most: certified fire protection, secure palm grip, comfortable wrist retention, and a lightweight feel. Its simple construction makes it a practical option for drivers purchasing their first FIA-approved gloves or replacing older equipment with a current homologation. For drivers who value straightforward performance and reliable protection, the OMP Sport delivers a strong balance of comfort, grip, and affordability. OMP Sport Nomex Glove Size Chart Frequently Asked Questions Are the OMP Sport Gloves FIA approved?Yes. The OMP Sport Gloves are homologated to the FIA 8856-2018 standard. Can these gloves be used for wheel-to-wheel racing?Yes, provided the racing organization accepts FIA 8856-2018-certified gloves. Always confirm the current rules for your series or event. How do the OMP Sport Gloves fit?They follow OMP’s standard glove fit and should feel close around the fingers and palm without restricting movement. A snug new fit may relax slightly after several sessions. Do the gloves have silicone palm grip?Yes. Silicone is printed directly onto the palm to improve steering-wheel traction while preserving sensitivity. Does the silicone maintain grip when the steering wheel becomes warm?Yes. The printed silicone is designed to provide consistent traction during extended driving sessions as cockpit temperatures increase. Do the OMP Sport Gloves have a wrist strap?No. An elasticated wrist opening keeps the gloves securely fitted without a separate adjustment strap. Are the OMP Sport Gloves comfortable for long sessions?Yes. Their lightweight construction and low-bulk palm design help reduce hand fatigue during extended driving. How should racing gloves fit at the fingertips?There should be minimal excess material beyond the fingertips. The gloves should fit closely without compressing the fingers or limiting movement.

Alpinestars Graphic 1 Engineered for precision and comfort in virtual racing The Alpinestars Graphic 1 Sim Racing Gloves are purpose-built for virtual racers demanding professional-grade control, precision, and comfort. Designed with feedback from top SIM drivers around the world, these gloves deliver the feel and responsiveness needed to perform at your peak during every session — whether you’re running an endurance race or perfecting lap times on your favorite circuit. Features Developed specifically for Sim racing with input from elite eSports and virtual racing professionals to meet the evolving demands of the SIM community. Lightweight, stretchable bonded textile construction provides maximum comfort, adaptability, and natural steering feedback during long sessions. Supremely soft Nanofront® palm fabric delivers exceptional tactile sensitivity, allowing precise throttle, brake, and steering inputs. Large perforations across the back of the hand, paired with smaller palm and finger perforations, promote optimal airflow and minimize sweat buildup. Elastic wrist cuff ensures a snug, secure fit while maintaining easy entry and removal. Bold printed graphics reflect Alpinestars’ racing heritage, combining professional aesthetics with advanced performance engineering. Alpinestars Graphic 1 Sim Glove FAQ's Are these gloves made for real racing or Sim use? These gloves are designed specifically for Sim racing, providing exceptional comfort, breathability, and control for long virtual racing sessions. Do they work with all Sim wheels and setups? Yes, the gloves are optimized for a wide range of steering wheels, including Alcantara, suede, and leather finishes. What makes the Nanofront® palm fabric special? The Nanofront® material offers superior grip, sensitivity, and feedback compared to traditional Sim gloves, improving fine control during driving. Are they breathable for long races? Absolutely. The perforated design ensures excellent ventilation, keeping your hands cool and comfortable even during endurance events. The Alpinestars Graphic 1 Sim Racing Gloves combine the brand’s motorsport DNA with next-generation materials, giving virtual racers the perfect blend of comfort, feedback, and control. Whether you're chasing podiums in iRacing or fine-tuning your technique in Assetto Corsa, these gloves deliver championship-level performance for your setup.

Alpinestars Graphic 3 Engineered for precision and comfort in virtual racing The Alpinestars Graphic 3 Sim Racing Gloves are purpose-built for virtual racers demanding professional-grade control, precision, and comfort. Designed with feedback from top Sim drivers around the world, these gloves deliver the feel and responsiveness needed to perform at your peak during every session — whether you’re running an endurance race or perfecting lap times on your favorite circuit. Features Developed specifically for Sim racing with input from elite eSports and virtual racing professionals to meet the evolving demands of the Sim community. Lightweight, stretchable bonded textile construction provides maximum comfort, adaptability, and natural steering feedback during long sessions. Supremely soft Nanofront® palm fabric delivers exceptional tactile sensitivity, allowing precise throttle, brake, and steering inputs. Large perforations across the back of the hand, paired with smaller palm and finger perforations, promote optimal airflow and minimize sweat buildup. Elastic wrist cuff ensures a snug, secure fit while maintaining easy entry and removal. Bold printed graphics reflect Alpinestars’ racing heritage, combining professional aesthetics with advanced performance engineering. FAQs: Alpinestars Graphic 3 Are these gloves made for real racing or Sim use? These gloves are designed specifically for Sim racing, providing exceptional comfort, breathability, and control for long virtual racing sessions. Do they work with all Sim wheels and setups? Yes, the gloves are optimized for a wide range of steering wheels, including Alcantara, suede, and leather finishes. What makes the Nanofront® palm fabric special? The Nanofront® material offers superior grip, sensitivity, and feedback compared to traditional Sim gloves, improving fine control during driving. Are they breathable for long races? Absolutely. The perforated design ensures excellent ventilation, keeping your hands cool and comfortable even during endurance events. The Alpinestars Graphic 3 Sim Racing Gloves combine the brand’s motorsport DNA with next-generation materials, giving virtual racers the perfect blend of comfort, feedback, and control. Whether you're chasing podiums in iRacing or fine-tuning your technique in Assetto Corsa, these gloves deliver championship-level performance for your setup.

OMP Tecnica FIA 8856-2018 Racing Gloves The OMP Tecnica Racing Gloves provide FIA-certified fire protection, precise steering-wheel feel, and dependable comfort for demanding motorsport applications. Their anatomical, pre-curved construction follows the natural shape of the hand to help reduce fatigue during qualifying sessions, sprint races, endurance events, and performance track driving. Multi-zone silicone grip material across the palm and fingers provides secure contact with the steering wheel, shifter, and paddle controls. A breathable, flame-resistant construction and flexible back panel help manage heat while preserving the close fit required for accurate cockpit control. Certified to the FIA 8856-2018 standard, the OMP Tecnica is designed for drivers who need competition-approved protection without sacrificing sensitivity, flexibility, or comfort. Pre-Curved Anatomical Fit The OMP Tecnica features pre-curved fingers that follow the natural position of the hand around the steering wheel. This construction reduces resistance through the fingers and allows the driver to maintain a more relaxed grip during extended sessions. The close anatomical fit also improves dexterity when operating paddle shifters, steering-wheel buttons, switches, sequential shifters, and other cockpit controls. Multi-Zone Silicone Palm Grip High-grip silicone material is strategically printed across the palm and fingers to provide dependable steering-wheel traction. The grip pattern is positioned to support the primary contact areas used during braking, cornering, shifting, and rapid steering inputs. The low-profile silicone surface helps preserve steering feedback while reducing the amount of gripping pressure needed to maintain control. This can help minimize hand fatigue during long races and repeated track sessions. Comfort-Focused Seam Construction The Tecnica glove construction is designed to minimize uncomfortable pressure points around the fingers and palm. Its carefully positioned seams create a smooth interior feel while maintaining the durability required for repeated competition use. This comfort-focused design is especially beneficial during endurance racing and other applications where the driver's hands remain wrapped around the steering wheel for extended periods. Breathable Flame-Resistant Construction Fire-resistant materials provide certified motorsport protection, while the breathable upper construction helps manage heat inside the glove. A flexible back section allows the glove to move naturally as the driver grips and releases the steering wheel. The combination of ventilation, stretch, and close-fitting construction provides a balance of cooling, flexibility, and protection without adding unnecessary bulk. Elastic Wrist and Pull Tab An elasticated wrist helps hold the glove securely in place while maintaining a streamlined fit beneath the sleeve of a compatible racing suit. The integrated pull tab makes the glove easier to put on between sessions. The low-profile wrist construction eliminates the need for a bulky external closure and provides dependable overlap with the racing-suit sleeve. FIA 8856-2018 Homologated The OMP Tecnica Racing Gloves are homologated to the FIA 8856-2018 standard for protective clothing used in automobile competition. This certification makes them suitable for many professional, amateur, club-level, endurance, rally, and road-racing applications. Drivers should confirm the required certification and homologation date with their racing organization or sanctioning body before competition. OMP Tecnica Racing Glove Features Fire-resistant auto-racing glove construction FIA 8856-2018 homologated Anatomical racing fit Pre-curved fingers reduce resistance and hand fatigue Multi-zone silicone grip across the palm and fingers Grip pattern optimized for the steering wheel and shifting controls Comfort-focused seams help reduce pressure points Breathable upper construction helps manage heat Flexible back panel supports natural hand movement Elastic wrist provides a secure, streamlined fit Pull tab assists with entry and removal Designed for sprint and endurance racing OMP Tecnica Racing Glove Specifications Manufacturer: OMP Model: Tecnica Product Type: Auto Racing Gloves Certification: FIA 8856-2018 Fit: Anatomical with pre-curved fingers Grip: Multi-zone silicone palm and finger print Wrist: Elasticated with pull tab Recommended Use: Auto racing, endurance competition, sprint racing, HPDE, and track driving Care: Hand wash cold and air dry away from direct heat Ideal for Multiple Motorsport Applications The OMP Tecnica Racing Gloves are designed for a wide range of competitive and performance-driving applications, including: Circuit racing Endurance racing Sprint racing Sports-car competition Touring-car racing Rally and time trials Autocross Driver instruction HPDE and performance track driving Why Choose OMP Tecnica Racing Gloves? The OMP Tecnica combines FIA-certified protection with the grip, dexterity, and comfort required for serious competition. Its pre-curved fingers provide a natural steering-wheel position, while the strategically placed silicone print delivers confident control without limiting feedback. Breathable flame-resistant materials, a flexible back panel, and a streamlined elastic wrist make the Tecnica suitable for both short qualifying runs and extended endurance stints. It is a strong choice for drivers seeking dependable protection and precise control in a lightweight racing glove. OMP Tecnica Glove Size Chart Frequently Asked Questions Are the OMP Tecnica Racing Gloves FIA approved?Yes. The OMP Tecnica is homologated to the FIA 8856-2018 standard for protective clothing used in automobile competition. How should OMP Tecnica Gloves fit?They should fit closely around the hand and fingers without restricting movement. There should not be excessive material at the fingertips or uncomfortable pressure across the palm. What type of grip is used on the palm?The Tecnica uses strategically positioned silicone grip material across the palm and fingers for secure steering-wheel, shifter, and paddle contact. What is the benefit of the pre-curved fingers?The pre-curved shape follows the natural position of the hand around the steering wheel, reducing resistance and helping minimize fatigue. Are the OMP Tecnica Gloves suitable for endurance racing?Yes. Their breathable construction, flexible fit, silicone palm grip, and comfort-focused design make them well suited for extended driving sessions. Can these gloves be used with paddle shifters?Yes. The close anatomical fit and finger grip zones provide the dexterity needed to operate paddle shifters and steering-wheel controls. Do the gloves use a wrist strap?No. An elasticated wrist provides a secure, streamlined fit without a bulky external closure. How should OMP Tecnica Racing Gloves be cleaned?Hand wash them in cold water using a mild detergent, then allow them to air dry away from direct sunlight or heat. Do not use a clothes dryer. Will the silicone palm grip wear over time?All grip surfaces can show wear with repeated use. Longevity depends on the steering-wheel material, frequency of use, storage conditions, and cleaning practices.

Sparco AIR-15 Pants The Sparco AIR-15 Pants are purpose-built for serious drag racers who demand uncompromising protection without sacrificing comfort. Designed with lightweight materials and tailored ventilation, these pants meet the stringent SFI 3.2A/15 certification while offering the breathable performance needed for long days at the strip. Whether you're staging a Pro Mod or dialing in your bracket car, the AIR-15 Pants are race-day essentials. SFI 15 Certified Drag Racing Pants for Maximum Safety Features Certified to SFI 3.2A/15 for high-level fire protection Lightweight, multi-layer construction designed for drag racing Strategically ventilated for breathability and heat management Comfortable tailored fit for optimal mobility and reduced bulk Finished in sleek black, available here in Size 68 Ideal for pairing with Sparco AIR-15 Jacket (sold separately) Sparco AIR-15 Pants FAQs Are the AIR-15 Pants approved for NHRA and other sanctioning bodies? Yes, they are SFI 3.2A/15 certified, which meets the fire protection requirements for most high-horsepower drag racing classes. What’s the benefit of the AIR-15 design? The AIR-15 Pants use advanced lightweight materials and integrated ventilation to keep racers cool while maintaining top-level protection. Are these pants meant to be used with a jacket? Yes, they’re typically paired with the Sparco AIR-15 Jacket to form a complete fire-resistant driver suit. Is Size 68 a standard fit? Sparco Size 68 is designed for larger drivers; please refer to Sparco's sizing chart for exact waist and inseam measurements. Built for racers who won’t compromise on safety or comfort, the Sparco AIR-15 Pants give you the confidence to focus on one thing—winning.

Sabelt Geckotech TG-11 Auto Racing Gloves The Sabelt Geckotech TG-11 Auto Racing Gloves are engineered to provide FIA-certified protection, dependable steering-wheel grip, and a close, comfortable fit for competitive motorsport. Their lightweight, streamlined construction helps improve dexterity while reducing unnecessary bulk inside confined racing cockpits. A silicone-treated palm creates a secure connection with the steering wheel, while reinforced internal palm construction adds durability in high-wear areas. The updated ergonomic fit allows the gloves to follow the natural shape of the hands for improved comfort, control, and precision during demanding race conditions. FIA 8856-2018 Certified Protection The Sabelt TG-11 Geckotech Gloves are homologated to the FIA 8856-2018 standard for fire-resistant driver equipment. This certification makes them suitable for many professional, club-level, road-racing, endurance, rally, and international motorsport applications. Drivers should always confirm the required safety standard with their racing organization or sanctioning body before competition. Silicone Palm Grip The Geckotech palm uses strategically applied silicone grip material to improve contact with the steering wheel. This high-grip surface helps reduce unwanted hand movement and allows the driver to maintain accurate steering input without applying excessive gripping pressure. Improved palm traction can also help reduce hand fatigue during long races, track sessions, and high-vibration driving conditions. Reinforced Internal Palm A strengthened internal palm increases durability in the areas exposed to the greatest pressure and friction. This reinforcement helps the TG-11 withstand repeated use while maintaining the flexibility and steering-wheel feel required for competitive driving. The durable construction makes these gloves well suited for drivers who regularly participate in racing, testing, instruction, or performance track events. Updated Ergonomic Fit Sabelt developed the TG-11 with an updated fit that follows the natural shape of the hand. The close-fitting construction reduces excess material around the palm and fingers, improving dexterity and reducing distraction inside the cockpit. The streamlined design also makes it easier to operate paddle shifters, steering-wheel buttons, switches, and other controls while maintaining a secure grip. Lightweight, Streamlined Construction The Geckotech TG-11 features a clean, low-profile design developed for comfort and performance. Its lightweight construction helps preserve natural hand movement while minimizing bulky material around the fingers, palm, and wrist. This driver-focused shape provides a precise feel that is suitable for sprint races, endurance events, rally competition, time trials, autocross, and performance driving. Sabelt Geckotech TG-11 Glove Features Premium fire-resistant auto-racing glove construction FIA 8856-2018 homologated Silicone-treated palm for enhanced steering-wheel grip Reinforced internal palm for improved durability Updated ergonomic fit Streamlined construction reduces excess bulk Designed for improved dexterity and steering precision Suitable for confined racing cockpits Available in black, red, and white Available in sizes 8 through 12 Sabelt Geckotech TG-11 Specifications Manufacturer: Sabelt Model: Geckotech TG-11 SKU: RFTG11 Homologation: FIA 8856-2018 Available Sizes: 8–12 Available Colors: Black, Red, and White Ideal for Multiple Motorsport Disciplines The Sabelt TG-11 is designed for drivers who need certified fire protection and reliable control across a wide range of motorsport applications. Its silicone grip, reinforced palm, and close ergonomic fit make it suitable for circuit racing, endurance competition, rally, time trials, autocross, and performance track driving. The lightweight construction provides the control required for short sprint events while remaining comfortable enough for extended driving sessions. Why Choose Sabelt Geckotech TG-11 Racing Gloves? The Sabelt Geckotech TG-11 combines FIA-approved protection with a high-grip palm and durable driver-focused construction. Its streamlined shape minimizes bulk, while the updated ergonomic fit provides a secure and natural connection with the steering wheel. For drivers seeking a modern Sabelt racing glove with dependable grip, reinforced durability, and FIA 8856-2018 homologation, the TG-11 offers an excellent balance of protection, comfort, and control. Sabelt Geckotech TG-11 Auto Racing Glove Size Chart Frequently Asked Questions What safety certification do the Sabelt TG-11 Gloves have?The Sabelt Geckotech TG-11 Gloves are homologated to the FIA 8856-2018 standard. Do these gloves have silicone palm grip?Yes. The palm features silicone grip material designed to improve steering-wheel control and reduce unwanted hand movement. Is the palm reinforced?Yes. The internal palm is strengthened to improve durability in high-wear areas. What sizes are available?The Sabelt Geckotech TG-11 Racing Gloves are available in sizes 8 through 12. What colors are available?Available color options include black, red, and white. How should Sabelt racing gloves fit?They should fit closely around the hand and fingers without restricting movement or creating uncomfortable pressure at the fingertips. Are these gloves suitable for track days?Yes. They are suitable for racing, track days, time trials, driver instruction, and other performance-driving applications where FIA-approved gloves are preferred or required. Can the Sabelt TG-11 Gloves be washed?Follow the care instructions supplied by Sabelt. Avoid harsh detergents, bleach, high heat, or cleaning methods that could damage the fire-resistant materials.

OMP First Racing Gloves The OMP First Racing Gloves combine lightweight construction, precise steering feedback, and premium comfort at an accessible price. Designed with features commonly found on higher-priced competition gloves, the OMP First uses external seams, a pre-curved hand shape, and low-profile silicone-rubber palm grip to improve control while reducing driver fatigue. An elasticated wrist keeps the glove securely positioned without adding a bulky closure, while the straight-cut extended gauntlet provides clean overlap with a compatible racing suit sleeve. FIA 8856-2018 homologation makes the OMP First suitable for modern motorsport competition where current FIA-approved driver gloves are required. Premium Racing-Glove Features at an Accessible Price The OMP First is designed for drivers who want comfort and performance without stepping into the highest-priced glove category. Its construction focuses on the features that have the greatest effect behind the wheel: smooth internal comfort, secure steering-wheel grip, natural hand movement, and certified fire-resistant protection. The result is a dependable racing glove that feels refined without becoming overly complicated or bulky. External Seams for Maximum Comfort The finger seams are positioned on the outside of the glove rather than against the driver’s skin. This creates a smoother internal surface and reduces pressure points when the fingers are wrapped around the steering wheel. External stitching is often reserved for premium racing gloves because it can significantly improve comfort during long races, testing sessions, and repeated track use. Pre-Curved Driving Fit The OMP First is shaped around the natural position of the hand while gripping a steering wheel. Pre-curved fingers require less effort to close and help prevent excess material from bunching across the palm. This design supports a more relaxed grip, helping reduce hand fatigue while maintaining precise control of paddle shifters, switches, buttons, and gear levers. Printed Silicone-Rubber Palm Grip Fire-retardant silicone-rubber inserts are printed directly onto the palm to provide dependable steering-wheel traction with minimal added thickness. The low-profile grip pattern helps maintain sensitivity and allows the driver to feel steering resistance, vibration, and changes in front-end grip. Because the silicone is printed directly onto the glove, it improves control without creating the bulk of a separate palm reinforcement layer. Secure Grip with Minimal Material Bunching The grip zones are positioned to support the primary contact areas between the hand and steering wheel. This placement improves traction while allowing the glove to flex naturally through braking, cornering, and rapid steering corrections. The combination of a pre-curved shape and thin printed grip helps the glove remain stable without restricting movement. Straight-Cut Extended Gauntlet The straight-cut gauntlet gives the OMP First a clean, traditional appearance while providing additional wrist coverage. Its extended length helps maintain proper overlap with the sleeve of a compatible fire-resistant racing suit. The longer cuff is designed in accordance with current FIA homologation requirements for improved protection against heat and flame exposure. Elasticated Wrist for Easy Entry An elastic band around the wrist keeps the glove securely fitted without requiring a hook-and-loop strap. The flexible opening makes the OMP First easy to put on and remove between sessions while helping prevent unwanted movement during aggressive steering inputs. The strapless design also eliminates a bulky adjustment point beneath the racing suit cuff. FIA 8856-2018 Homologated Protection The OMP First Racing Gloves are certified to the FIA 8856-2018 standard for protective clothing used in automobile competition. The fire-resistant construction and extended cuff provide current protection for the hands and wrists in demanding motorsport environments. Drivers should verify the exact glove certification required by their sanctioning body before competition. OMP First Racing Glove Construction Lightweight fire-resistant racing glove construction External seams reduce interior pressure points Pre-curved fingers follow the natural driving position Printed fire-retardant silicone-rubber palm inserts Low-profile grip preserves steering sensitivity Strategically positioned grip zones reduce bunching Straight-cut extended gauntlet Elastic wrist provides secure retention Easy on-and-off strapless design OMP First Racing Glove Protection Fire-resistant materials designed for motorsport use Extended cuff provides increased wrist coverage Designed for protection against heat and flame exposure FIA 8856-2018 homologated OMP First Racing Glove Specifications Manufacturer: OMP Model: First Product Type: Fire-Resistant Auto Racing Gloves Fit: Pre-curved Seams: External Palm: Printed fire-retardant silicone-rubber inserts Wrist: Elasticated Gauntlet: Straight-cut extended cuff Homologation: FIA 8856-2018 Why Drivers Choose the OMP First The OMP First delivers several construction features normally associated with more expensive racing gloves. External seams help keep stitching away from the fingers, the pre-curved shape reduces hand fatigue, and the printed silicone palm provides secure traction without dulling steering feedback. For drivers seeking an FIA-approved glove with a comfortable fit, dependable grip, and strong overall value, the OMP First remains a proven competition choice. OMP First Racing Glove Size Chart Frequently Asked Questions Are the OMP First Racing Gloves FIA approved?Yes. The OMP First Racing Gloves are homologated to the FIA 8856-2018 standard. What is the advantage of external seams?External seams move the main stitching away from the inside of the fingers, reducing pressure points while gripping the steering wheel. Do the OMP First Gloves have silicone palm grip?Yes. Fire-retardant silicone-rubber inserts are printed directly onto the palm to improve traction and steering sensitivity. How does the pre-curved design improve comfort?The pre-curved shape follows the natural position of the hand around the steering wheel, reducing resistance, material bunching, and fatigue. Do these gloves have a wrist strap?No. An elasticated wrist keeps the glove securely positioned without a separate closure strap. Why does the OMP First have an extended cuff?The extended gauntlet provides additional wrist protection and proper overlap with a compatible racing suit sleeve. How should the OMP First Racing Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excessive material at the fingertips. Are the OMP First Gloves comfortable for long races?Yes. Their external seams, pre-curved construction, lightweight design, and low-profile palm grip are intended to improve comfort during extended driving sessions.

OMP First Evo Racing Gloves   The OMP First Evo Racing Gloves deliver premium comfort, responsive steering feel, and FIA-certified protection at an accessible price. Their lightweight construction combines external seams, a pre-curved hand shape, and low-profile silicone-rubber palm inserts to provide many of the features normally associated with higher-priced competition gloves. An elasticated wrist keeps the glove securely positioned without adding a bulky closure, while the straight-cut extended gauntlet provides clean overlap with a compatible racing suit sleeve. FIA 8856-2018 homologation makes the OMP First Evo a dependable option for modern motorsport competition. Premium Comfort Without the Premium Price The OMP First Evo is designed for drivers who want advanced glove construction without moving into the highest price category. Its streamlined design focuses on the features that make the greatest difference behind the wheel: reduced pressure points, secure grip, natural hand movement, and lightweight fire-resistant protection. This combination makes the First Evo a strong choice for drivers who value both performance and overall value. External Seams Reduce Pressure Points The primary finger seams are positioned on the outside of the glove rather than against the driver’s skin. This creates a smoother interior and reduces pressure along the fingers while gripping the steering wheel. External stitching is often found on premium racing gloves because it can significantly improve comfort during endurance races, testing sessions, and long track days. Pre-Curved Driving Fit The OMP First Evo is shaped around the natural position of the hand while holding a steering wheel. Its pre-curved fingers require less effort to close and help prevent excess material from gathering across the palm. This driving-specific shape promotes a more relaxed grip, reducing hand fatigue while maintaining precise operation of paddle shifters, switches, buttons, and gear levers. Printed Silicone-Rubber Palm Grip Fire-retardant silicone-rubber inserts are printed directly onto the palm to provide dependable steering-wheel traction with minimal added thickness. The low-profile grip improves control while preserving sensitivity through the wheel. Drivers can maintain a secure hold while still feeling steering resistance, vibration, and changes in front-end grip. Maximum Grip with Minimum Bulk The printed grip surface eliminates the need for a thick, separate palm reinforcement layer. This helps the glove flex naturally and keeps unnecessary material away from the primary steering-wheel contact areas. The combination of silicone grip and a pre-curved palm allows the driver to maintain control without squeezing the wheel excessively. Straight-Cut Extended Gauntlet The straight-cut gauntlet gives the OMP First Evo a clean, traditional appearance while providing additional wrist coverage. Its extended length helps maintain proper overlap with the sleeve of a compatible fire-resistant racing suit. The longer cuff is designed in accordance with current FIA homologation requirements for increased protection against heat and flame exposure. Elasticated Wrist for Secure Retention An elastic band around the wrist keeps the glove securely fitted without requiring a hook-and-loop strap. The flexible opening makes the First Evo easy to put on and remove while helping prevent unwanted movement during aggressive steering inputs. The strapless design also eliminates a bulky adjustment point beneath the racing suit sleeve. FIA 8856-2018 Homologated Protection The OMP First Evo Racing Gloves are certified to the FIA 8856-2018 standard for protective clothing used in automobile competition. Their fire-resistant construction and extended cuff provide current protection for the hands and wrists in demanding motorsport environments. Drivers should verify the exact glove certification required by their sanctioning organization before competition. OMP First Evo Nomex Glove Construction Lightweight fire-resistant racing glove construction External seams reduce interior pressure points Pre-curved fingers follow the natural driving position Printed fire-retardant silicone-rubber palm inserts Low-profile grip preserves steering sensitivity Straight-cut extended gauntlet Elastic wrist provides secure retention Easy on-and-off strapless design OMP First Evo Nomex Glove Protection Fire-resistant construction developed for auto racing Extended cuff increases wrist and sleeve coverage Designed for protection against heat and flame exposure FIA 8856-2018 homologated OMP First Evo Racing Glove Specifications Manufacturer: OMP Model: First Evo Product Type: Fire-Resistant Auto Racing Gloves Fit: Pre-curved Seams: External Palm: Printed fire-retardant silicone-rubber inserts Wrist: Elasticated Gauntlet: Straight-cut extended cuff Homologation: FIA 8856-2018 Why Drivers Choose the OMP First Evo The OMP First Evo combines several construction features normally associated with more expensive racing gloves. External seams help keep stitching away from the fingers, the pre-curved shape reduces hand fatigue, and the printed silicone palm provides secure traction without dulling steering feedback. For drivers seeking an FIA-approved glove with a refined fit, dependable grip, and strong overall value, the OMP First Evo is an excellent competition-ready choice. OMP First Evo Nomex Glove Size Chart Frequently Asked Questions Are the OMP First Evo Racing Gloves FIA approved?Yes. The OMP First Evo is homologated to the FIA 8856-2018 standard. What is the benefit of external seams?External seams move the main stitching away from the inside of the fingers, reducing pressure points and improving comfort while holding the steering wheel. Do the OMP First Evo Gloves have silicone palm grip?Yes. Fire-retardant silicone-rubber inserts are printed directly onto the palm to improve traction and steering sensitivity. How does the pre-curved shape improve comfort?The pre-curved design follows the natural position of the hand around the steering wheel, reducing resistance, material bunching, and fatigue. Do these gloves use a wrist strap?No. An elasticated wrist keeps the gloves securely positioned without a separate closure strap. Why does the OMP First Evo have an extended cuff?The extended gauntlet provides additional wrist protection and proper overlap with a compatible racing suit sleeve. How should OMP First Evo Racing Gloves fit?They should fit closely around the fingers and palm without restricting movement or leaving excessive material at the fingertips. Are the OMP First Evo Gloves comfortable for long races?Yes. Their external seams, pre-curved construction, lightweight design, and low-profile palm grip are intended to improve comfort during extended driving sessions.

Sabelt Hero Superlight Women's TS-10 Driver Race Suit Light, Comfortable, and FIA 8856-2018 Approved The Sabelt Hero Superlight Women's TS-10 Driver Race Suit is a professional-level women’s racing suit designed for drivers who want ultra-lightweight comfort, modern protection, and a fit tailored specifically for female racers. Built with premium multi-layer Nomex materials, the TS-10 delivers FIA-approved safety without unnecessary bulk. At only 265 g/m², the Hero Superlight TS-10 is one of the lightest women’s driver suits available. Its slim, ergonomic cut helps reduce excess material, while stretch panels in key movement zones improve flexibility and comfort in the cockpit. Built Specifically For Women Racing Drivers Unlike many race suits that simply resize a standard men’s pattern, the Sabelt Hero Superlight Women's TS-10 is tailored for a women-specific fit. The suit is shaped for comfort while seated in a race car, helping reduce bunching, restriction, and driver fatigue. Pre-curved sleeves help maintain a natural driving position, while elastic stretch panels around the elbows, knees, and lumbar area provide added movement and ventilation during long sessions. The lower-profile collar helps reduce restriction around the neck, making the suit more comfortable during extended track time. Lightweight Multi-Layer Nomex Protection The TS-10 uses a three-layer fire-resistant construction designed to balance protection, comfort, and weight savings. The outer layer is made from an extremely light woven flame-resistant material, while the soft Nomex inner layer adds comfort against the body. A honeycomb middle layer provides insulation without adding unnecessary bulk. For maximum lightness, this women’s racing suit does not use a waist belt. Instead, the clean slim-fitting design eliminates excess seams and unnecessary material. Even the accent stripes are printed to help save weight. Sabelt Hero Superlight Women's TS-10 Details FIA 8856-2018 approved Women-specific driver race suit fit Lightweight 265 g/m² fabric construction Multi-layer fireproof Nomex materials Soft knit Nomex inner layer for comfort Honeycomb middle layer for insulation Breathable and ergonomic construction Stretch panels for comfort and mobility Full floating sleeves Anti-bunching pre-curved arms Lower-profile collar for reduced restriction Front cellphone pocket No waist belt for reduced weight Black knit wrist and ankle cuffs Printed Sabelt logo details Available in multiple color options Why Choose The Sabelt Hero Superlight Women's TS-10? The Sabelt Hero Superlight Women's TS-10 Race Suit is ideal for women drivers who want a lightweight FIA-approved suit without sacrificing comfort or professional protection. Its low weight, slim fit, stretch panels, and women-specific tailoring make it a strong choice for club racing, endurance racing, HPDE competition, and serious motorsport use. With its clean design and premium Sabelt construction, the TS-10 delivers the comfort and mobility drivers need while maintaining the safety standards required for modern racing. Sabelt Women's Race Suit Sizing Proper race suit sizing is important for both comfort and safety. The Sabelt Hero Superlight Women's TS-10 is designed with a women-specific fit, so use the Sabelt women’s size chart when selecting your size. Frequently Asked Questions Q: Is the Sabelt Hero Superlight Women's TS-10 FIA approved?A: Yes. The Sabelt Hero Superlight Women's TS-10 Driver Race Suit is FIA 8856-2018 approved for motorsport use. Q: Is this race suit made specifically for women?A: Yes. The TS-10 is tailored with a women-specific fit instead of using a resized men’s suit pattern. Q: How lightweight is the Sabelt Hero Superlight TS-10?A: The suit uses lightweight 265 g/m² fabric construction, making it one of Sabelt’s lighter professional-level women’s race suits. Q: Does the TS-10 have a waist belt?A: No. The Sabelt Hero Superlight Women's TS-10 does not use a waist belt in order to reduce weight and keep the suit slim and clean. Q: What materials are used in this suit?A: The TS-10 uses multi-layer fireproof Nomex materials, including a light woven outer layer, honeycomb insulation layer, and soft knit Nomex inner layer. Q: Is this suit comfortable for long races?A: Yes. Stretch panels, pre-curved arms, breathable construction, and a lower-profile collar help improve comfort during long sessions. Q: What colors are available?A: The Sabelt Hero Superlight Women's TS-10 is available in multiple color options, including pink, black, and white versions. Sabelt Women's Race Suit Sizing:

Sabelt Challenge TS-2 Racing Driver Suit The Sabelt Challenge TS-2 Racing Driver Suit delivers lightweight FIA-certified protection, classic motorsport styling, and the high-quality tailoring Sabelt is known for. Weighing just 360 g/m², the Challenge TS-2 is even lighter than its predecessor, making it a strong choice for drivers who want comfort, mobility, and reliable fire-resistant performance. Built with a Nomex fire-retardant anti-bubbling external layer, this Sabelt race suit is designed for serious track use while maintaining a clean, traditional racing look. The lower-profile collar improves comfort around the neck, while pre-curved arms and full-floating sleeves help reduce restriction behind the wheel. Whether you are racing, testing, or spending long sessions in the car, the Challenge TS-2 is made to move naturally with the driver. Lightweight FIA-Certified Race Suit The Sabelt Challenge TS-2 is FIA 8856-2018 certified, meeting modern safety requirements for auto racing competition. Its lightweight 360 g/m² construction helps reduce bulk without sacrificing the protection expected from a professional-grade racing suit. Designed for Driver Comfort and Mobility Sabelt designed the Challenge TS-2 with several driver-focused features, including full-floating sleeves, pre-curved arms, an internal elastic waist band, and an outer waist belt. These details help improve fit, comfort, and freedom of movement while seated in a race car. Sabelt Challenge TS-2 Driver Suit Details FIA 8856-2018 certified racing driver suit Lightweight 360 g/m² fabric construction Nomex fire-retardant anti-bubbling external layer Low-profile collar for improved comfort Pre-curved arms for natural driving position Full-floating sleeves for improved range of motion Internal elastic waist band Adjustable outer waist belt External pockets Hidden shoulder handles under embroidered Sabelt logos Available in EU sizes 46 to 66 Available colors: Black/White, Black/Yellow, Red, White, and Blue Why Choose the Sabelt Challenge TS-2 Racing Suit? The Challenge TS-2 is ideal for drivers looking for a lightweight FIA race suit with traditional styling, modern safety certification, and Sabelt’s refined fit. With its combination of fire-resistant Nomex construction, mobility-focused sleeve design, and clean color options, the TS-2 is a versatile choice for club racers, HPDE drivers moving into competition, and experienced racers who want reliable performance without unnecessary bulk. Sabelt Challenge TS-2 Race Suit FAQs Is the Sabelt Challenge TS-2 FIA certified?Yes, the Sabelt Challenge TS-2 Racing Driver Suit is FIA 8856-2018 certified. How much does the Sabelt Challenge TS-2 weigh?The Challenge TS-2 has a lightweight fabric weight of 360 g/m². What material is used in the Sabelt Challenge TS-2?The suit uses a Nomex fire-retardant anti-bubbling external layer designed for motorsport use. What sizes are available?The Sabelt Challenge TS-2 is available in EU sizes 46 to 66, which approximately correspond to US sizes 36 to 56. What colors does the Challenge TS-2 come in?Available colors include Black/White, Black/Yellow, Red, White, and Blue. Does the Sabelt Challenge TS-2 have floating sleeves?Yes, the suit features full-floating sleeves to improve range of motion while driving.

Sabelt Custom Superlight TS-10 Driver Race Suit The Sabelt Custom Superlight TS-10 Driver Race Suit is built for drivers who want the lightest possible FIA-approved fire suit with a fully personalized design and fit. If you have ever wanted a race suit tailored to your body, designed around your livery, and customized with your name, flag, colors, logos, and sponsor branding, the Sabelt Custom Superlight TS-10 delivers a true professional-level solution. The Sabelt Superlight TS-10 is one of the lightest driver race suits available, with a fabric weight of only 265 g/m² while still meeting the latest FIA 8856-2018 homologation for modern motorsport safety. The custom version allows you to choose primary, secondary, and tertiary colors, select thread colors if desired, and add custom logos, manufacturer logos, series logos, driver details, and more. Sabelt Custom Superlight TS-10 Race Suit Options Name on suit Country flag on suit Belt on suit Choice of slim or regular fit Cooling shirt tube pass-through: none, left, or right Boot-cut or standard cuff Pockets: none, normal, and/or cellphone Sponsor logos printed or embroidered Custom colors, patterns, and thread colors Manufacturer, sponsor, team, and series logo placement Standard Sabelt Superlight TS-10 Race Suit Features FIA 8856-2018 approved Ultra-lightweight 265 g/m² fabric construction Full floating sleeves for improved range of motion Large stretch panel in the lumbar and hip areas Driver cooling tube pass-through on the left hip Cellphone pocket on the front right thigh Pre-curved arms for comfort in the driving position Professional motorsport fit and construction Fully Custom Race Suit Design The Sabelt Custom Superlight TS-10 can be designed around your racing program, team branding, car livery, sponsor package, or personal style. You can select your colors, add logos, adjust design elements, and configure suit options to create a finished product that looks professional and fits your exact needs. Whether you compete in IMSA, WEC, Ferrari Challenge, Porsche Sprint Challenge, SCCA, NASA, or another racing series, Discovery Parts can help guide the custom suit process. We understand how series logos, manufacturer logos, and sponsor placement need to be handled for a clean, compliant, professional appearance. If you are not competing in a pro or semi-pro series, the Sabelt Custom Superlight TS-10 is still an excellent choice for drivers who want a premium custom fire suit built to match their car, helmet, team colors, or personal livery. Without series compliance requirements, the design possibilities are wide open. Lightweight Performance And Driver Comfort At only 265 g/m², the Superlight TS-10 is designed for drivers who want reduced weight without sacrificing certified fire protection. Full floating sleeves, pre-curved arms, and stretch panels in the lumbar and hip areas help the suit move naturally with the driver while seated in the car. The result is a lightweight custom race suit built for long sessions, endurance events, sprint racing, and serious track use. Important Pricing And Ordering Information The Sabelt Custom Superlight TS-10 Driver Race Suit is a special-order product and is estimated to ship in approximately two to three weeks. Returns are not accepted on special-order custom suits. The standard price includes basic customization, colors, and patterns. After your order is placed, a custom suit specialist from Discovery Parts will contact you to confirm your sizing, color selections, series compliance needs, logo placement, and other design details. You will be sent a measurement chart and may submit photos of your car livery, sponsor logos, example suits, or other references to help create the artwork for your custom suit. A proof will be sent for review, revisions, and approval, typically within two to three business days. Once the final design, colors, sizing, logos, and options are approved, the final cost of your custom suit will be confirmed with a supplemental invoice. Final pricing may vary based on the number of logos, design complexity, custom colors, embroidery, and additional options selected. Sabelt Custom Superlight TS-10 Driver Race Suit FAQs Is the Sabelt Custom Superlight TS-10 FIA approved?Yes, the Sabelt Superlight TS-10 is FIA 8856-2018 approved. How light is the Sabelt Superlight TS-10?The suit has a fabric weight of only 265 g/m², making it an extremely lightweight FIA-approved driver suit. Can I choose custom colors?Yes, you can choose primary, secondary, and tertiary colors, and thread colors may also be selected if desired. Can sponsor logos be added?Yes, sponsor logos, manufacturer logos, series logos, team logos, and custom branding can be added to the suit. Can logos be printed or embroidered?Yes, sponsor logos and other graphics can be printed or embroidered depending on the design and option selected. Can the suit be made to fit me?Yes, the suit can be configured with custom measurement information and fit preferences, including slim or regular fit. How long does a custom Sabelt TS-10 suit take to ship?The estimated ship time is approximately two to three weeks after the design, sizing, and custom options are approved. Are custom Sabelt suits returnable?No, custom and special-order suits are not eligible for return once ordered.

Sparco Martini Racing Driver Suit The Golden Age of Rally Racing Brought Back to Life! In the golden years of rally racing, Sparco and Martini Racing contributed to the triumphs of the best racing drivers in the world. Now this partnership is renewed, and fans of the Martini Racing historical livery have access to beautiful re-creations of the original Sparco products. All of Sparco's Martini Racing reproductions have been updated with the newest Sparco safety technology and carry current FIA homologations. Classic Racing Heritage Meets Modern Technology The Sparco Martini Racing Replica Race Suit is made with all-new lightweight three-layer fabric. It offers superior fire protection, breathability, and comfort when compared to the original worn back in the day. The suit features iconic Martini Racing embroideries and patches to faithfully recreate the original look. The Martini Racing replica race suit is made from Sparco's latest generation fabrics, offering a soft, lightweight outer fabric and breathable inserts at the sides, plus a large lower-back stretch panel for maximum comfort. The Sparco Martini Racing Replica Race Suit also features a light-weight zipper and collar, pre-curved arms, pockets, classic tone-on-tone box quilt stitching and Sparco's signature epaulettes. Available in sizes EU48 - EU66. Sparco Martini Replica Race Suit Details: Martini Racing embroideries Lightweight three-layer fabric Pre-curved arms  Lightweight zipper and collar Breathable stretch panels FIA 8856-2018 approved