All

Motorola Antenna Adapter Antenna Adapter for Motorola CP200D / PR400 Portable Radio To BNC Antenna Adapter. Use this to connect your 1/4 turn BNC antenna to the fully threaded adapter on the back of your Motorola CP200D or Motorola PR400 Motorola Part Number: 5886564Z01 Use: Adapt BNC Antenna to Motorola CP200D or Motorola PR400 Handheld Radio

Longacre Toe-In Plates with Magnets The Longacre 52-79501 Toe-In Plates use magnets to hold the far end of the tape measure securely while you read the close-end measurement. Simple and easy to store in the spares kit, Longacre toe plates are a trackside must have. Longacre Toe Plates keep the highest value race cars at the front of the pack. Longacre Toe-In Plates with Magnets (pair) is a track side favorite with many teams from ChampCar to Grand-Am. Longacre Toe Plates with Magnets Details: Manufacturer: Longacre Racing Manufacturer Part Number: 52-79501 Quickest and simplest way to measure toe-in Rest one of these plates against the tire on each side and measure toe directly using the 2 tapes (included) Formed design is rigid for accuracy and stays put against the tire Magnets hold tape in place Dimensions: 23 1/2" x 9" How to use Longacre Toe Plates: This is a fast way to check / set front end toe. It is affected by wheel or tire runout. Be certain wheels run true and tires have no bulges. Turn wheels to straight ahead: Should be done on level ground. Set caster & camber first. Lean plates up against wheels: Folded lip goes to the outside. Be sure the entire plate is up against the wheel. Measure front width, then rear: Use the slots for the tape measure. Subtract one from the other for toe. Larger front width means toe-out.

Schroth Tuning Harness Pads Wearing a harness for long periods of time can irritate the skin your shoulders and neck where the shoulder straps are. In that case, you need a set of Schroth Tuning Harness Pads to give you a soft, safe cushion between you and your harness webbing. They can also simply be used as a stylish comfort add-on to your harness or even your factory three-point seat belt. Made of high quality polyester, these pads can be washed easily and can be installed/removed in seconds. They come in a wide variety of colors with a Schroth Racing patch sewn in. Priced/sold in pairs, one set of Schroth Tuning Harness Pads covers a harness. These are 2" Size.

AeroCatch 120 Series Flush Mount Hood Pins AeroCatch are installed on some of the fastest race cars on the planet. From Spec Miata to Daytona Prototype, AeroCatch hood pins are every race track every weekend. AeroCatch 120 Series Plus flush mount hood pin kits consist of lightweight, high-strength glass-reinforced thermoplastic housings containing a hinged, spring-loaded stainless steel pin. This pin engages with the aluminum hood pin forming a secure latch. Compact and aerodynamic, Aerocatch Flush Mount Hood Pins are modern replacements for conventional hood pins, door latches and more. The 120 series are designed to be fitted from above the panel and include a cardboard template to ensure precise cutting and drilling. Each AeroCatch 120 Hood Pin Kit includes two thermoplastic AeroCatch bodies, two nut fixing plates, two red aluminum strike pins, two rubber bump stops, all necessary fasteners, and an arrow sticker set. Keep your hood, trunk, tailgate, or bonnet shut at high speeds with a set of AeroCatch 120 Series Flush Mount Hood Pins. AeroCatch 120 Series Flush Mount Hood Pins Details: Manufacturer: AeroCatch Manufacturer part number: 120-2000 Hood pin length: 126mm (~ 5.0") Mounting: above panel Mount location: top- or side-mount Hood pin style: flush mount Hood pin body finish: black

Arai GP-5W Replacement Shields Replacement shields for the Arai GP-5W auto racing helmet.

Sparco K-Ring Karting Neck Collar The Sparco K-Ring Karting Neck Collar is an anatomically designed 360-degree neck support collar built for karting drivers who want added helmet support, comfort, and impact absorption around the neck and shoulders. Made with high-density impact foam, the K-Ring helps support the helmet while spreading load across the sternum, shoulders, and upper back. 360-Degree Karting Neck Support With Magnetic Closure The K-Ring uses a full 360-degree collar shape for consistent neck support, plus sternum and upper back support areas designed to help absorb energy across the shoulders. A hidden magnetic closure system with a Velcro security strap makes the collar quick to put on, remove, and secure before heading to grid. Features Anatomically designed 360-degree karting neck collar High-density impact foam construction for firmer support Sternum and upper back support areas help distribute energy across the shoulders Hidden magnetic closure system for quick fitting and removal Velcro security strap helps keep the collar closed and secure Available in Youth and Standard sizes Available in Black/Red and Black/White color options Designed for karting drivers looking for added neck and helmet support Sparco K-Ring Karting Neck Collar FAQs What is the Sparco K-Ring used for? The Sparco K-Ring is a karting neck support collar designed to help support helmet weight and provide added impact-absorbing support around the neck, shoulders, sternum, and upper back. What sizes are available? The K-Ring is available in Youth and Standard sizes. What colors are available? This listing includes Black/Red and Black/White color options. How does the collar close? The K-Ring uses hidden magnets for quick closure along with a Velcro strap for added security. Is this a head-and-neck restraint? No. This is a karting neck support collar and is not a substitute for a certified head-and-neck restraint used in full-size auto racing. Add the Sparco K-Ring Karting Neck Collar to your karting setup for comfortable helmet support and added confidence on track.

Sparco Helmet Shields (Stealth RF) The Sparco Helmet Shields (Stealth RF) are designed to give you optimal clarity, visibility, and protection on track. Engineered from high-grade optical materials, these visors ensure minimal distortion while offering advanced anti-fog and anti-scratch coatings. Whether you’re running under blazing sun or in evening sessions, the Stealth RF shield keeps your vision sharp and your focus locked on the apex. High-Performance Clarity for Racing Precision Developed for Sparco’s premium racing helmet lineup, the Stealth RF visor delivers exceptional light management and UV defense. It’s built to handle everything from bright daylight to low-light endurance conditions, ensuring peak optical performance in all environments. The aerodynamic curvature minimizes wind resistance while maintaining a sleek, professional look for serious racers. Features • Compatible with Sparco full-face helmets (RF series)• Optically correct for distortion-free vision• Advanced anti-fog and anti-scratch coatings• UV-resistant for maximum eye protection• Available in multiple tints for varying light conditions• Easy tool-free installation and replacement• Lightweight and impact-resistant construction Sparco Helmet Shields (Stealth RF) FAQs: Are these shields compatible with all Sparco helmets? The Stealth RF shields are specifically designed for Sparco RF-series helmets, ensuring a perfect fit and seal. Do the STEALTH RF shields come in different tints? Yes. They’re available in clear, light smoke, dark smoke, mirrored, and iridium finishes for various lighting conditions. How do I clean my Sparco helmet shield? Use mild soap and water with a microfiber cloth. Avoid harsh cleaners that can damage the anti-fog coating. Can I use this shield for night racing? Absolutely. The clear or light smoke variants are ideal for low-light or night track sessions. Does this shield fit older Sparco models? It’s compatible with most recent RF-series helmets but not older GP or WTX models. Check your helmet’s model number before purchasing. Upgrade your vision and protection with the Sparco Helmet Shields (Stealth RF) — engineered for racers who demand uncompromising clarity and performance on every lap.

Stilo to IMSA Adapter Cable (Female/Female) This cable enables connection between an IMSA helmet kit and a Stilo intercom. All of our cables are built at our Mooresville location with U.S. manufactured mil-spec hardware. RaceCom cables are very strong and have been pull tested by a certified lab - our meticulous build process has been proven to outlast and outperform all others in the business.

Stilo to Garmin Adapter Cable This cable can be used to connect your Garmin Catalyst Driver Performance Optimizer to your Stilo helmet. Includes 3.5mm connector on one end and Stilo male IMSA connector on the other. Made in the USA from thin ROHS-compliant cable. SKU R AD GARMIN2STILO

GiroDisc "Magic Pads" are the solution to your squeaky, dusty, expensive factory replacement pads. They have lower dust than typical factory pads and much less than other performance pads. You won't be cleaning your wheels nearly as often! Additionally, they have great initial bite, something most less-expensive pads lack. But the real reason people like Magic Pads so much is they are the "silver bullet" to brake noise problems. Magic Pads are a semi-metallic composition that is easy on rotors and on your wallet. We recommend always replacing pads as a whole car set when switching compounds. All Magic Pads come with anti-noise shields pre-installed and included in the price. If you have any questions, give us a call at 888-748-7223. We're happy to help!

AiM Sports EGT Thermocouple Sensors Add the appropriate AiM Sports Exhaust Gas Temperature sensor to your AiM data set-up to retrieve exactly the information you need to maximize your data acquisition and take your racing to the next level! AiM devices can measure exhaust gas temperature using a sensor – thermocouple – placed in the exhaust header pipe. All AiM thermocouples are K-type sensors and fit car, motorcycle, and karting installations. Cable length is 250mm (~10 in.) TEMPERATURE SENSOR TYPES K-type thermocouple, M5 thread  K-type thermocouple, T12 (CIK-FIA homologated)

Chillout Systems Wiring Harness This 10 AWG wiring harness features a 10-foot shock-resistant rubber power cord wrapped in a protective textile fabric. Overall length is 14 feet.

Aim Sports 4-Port Data Hub The acquisition of the essential data you need to evaluate your race car's performance requires the connection of a lot of peripherals to your AiM data-logger. This, in turn, requires a great number of cables. To solve this problem, AiM developed the Data Hub, a CAN connection multiplier that works as an interface between all AiM data-loggers and their various peripherals. Extend the capabilities of your AiM data-logger without occupying any more channels or running more cables to your dash. Each AiM 4-Port CAN Data Hub connects up to four CAN peripherals. You can even stack as many as four AiM Data Hubs, multiplying the number of available connections! Accepts any AiM CAN accessory, including GPS, LCU-One Lambda Controller, Memory Key, or TC (thermocouple) Hubs. Any channel can be selected for display on the dash. Includes a 15-inch cable. AiM 4-PORT CAN DATA HUB DETAILS Manufacturer: AiM Sports Manufacturer part no: X08HUB010 Connectors 1-4: Binder 712 5-pin, female (from peripherals) Connector 5: Binder 712 5-pin, male (to dash) Dimensions: 123 x 30 x 23.5mm (4.8 x 1.2 x 0.9 in.) CAN cable length: 40cm (15.75 in.) Weight: 97g (3.4 oz.) Waterproof: IP65 AN EXAMPLE OF A COMPLEX SETUP Let's take a V-8 race car with an AiM MXG 1.3 dash plus the following peripherals: One EGT sensor on every cylinder (8) Two CHT sensors on each cylinder bank (4) One Lambda sensor on each exhaust header (2) One GPS09C module One AiM Memory Key You would need three TC Hubs and two Data Hubs. The EGT and CHT thermocouples would all connect to the three TC Hubs. The TC Hubs and the GPS09C connected to one 4-Port Data Hub. That Data Hub would be connected, the two Lambda controllers, and the Memory Key connect to a second 4-Port Data Hub. And that Data Hub would connect to your AiM MXG 1.3 dash. That's sixteen channels monitored by the MXG 1.3 in addition to the other channels still available. That puts an enormous amount of data  right at your fingertips!

HANS Helmet Post Anchors HANS helmet post anchors to attach your HANS or Stand21 head-and-neck restraint to your Snell SA2020 or SA2025 helmet. These post anchors are FIA-approved and screw right into the pre-installed M6 inserts in your helmet.