Sparco S.p.A.
Sparco Track Set Seat Slider
$89.00
Sparco Track Set Seat Slider
The Sparco track set -- also known as seat sliders -- are recommended for any seat application. This seat track set allows you to adjust the seat position fore and aft for a customized, comfortable cockpit. Sparco seat tracks employ a double locking mechanisim for increased safety.
Sparco S.p.A.
Sparco Side Mount Brackets: Steel
$89.00
Sparco Steel Side Mount Seat Brackets
The Sparco Steel Side Mount competition seat mounting brackets have multiple holes, giving you the flexibility to find the safest and most comfortable mounting position for your racing seat.
Sparco Steel Side Mount Details
Manufacturer: Sparco
Manufacturer part no.: 004902
Material: steel
Finish: powder coated black
Weight: 5.0 lbs (2.3 kg) per set
Longacre
Longacre Toe Plates with Magnets
$86.99
Longacre Toe-In Plates with Magnets
The Longacre 52-79501 Toe-In Plates use magnets to hold the far end of the tape measure securely while you read the close-end measurement. Simple and easy to store in the spares kit, Longacre toe plates are a trackside must have. Longacre Toe Plates keep the highest value race cars at the front of the pack. Longacre Toe-In Plates with Magnets (pair) is a track side favorite with many teams from ChampCar to Grand-Am.
Longacre Toe Plates with Magnets Details:
Manufacturer: Longacre Racing
Manufacturer Part Number: 52-79501
Quickest and simplest way to measure toe-in
Rest one of these plates against the tire on each side and measure toe directly using the 2 tapes (included)
Formed design is rigid for accuracy and stays put against the tire
Magnets hold tape in place
Dimensions: 23 1/2" x 9"
How to use Longacre Toe Plates:
This is a fast way to check / set front end toe. It is affected by wheel or tire runout. Be certain wheels run true and tires have no bulges.
Turn wheels to straight ahead: Should be done on level ground. Set caster & camber first.
Lean plates up against wheels: Folded lip goes to the outside. Be sure the entire plate is up against the wheel.
Measure front width, then rear: Use the slots for the tape measure. Subtract one from the other for toe. Larger front width means toe-out.
Schroth Safety Products LLC
Schroth Tuning Harness Pads
$86.95
Schroth Tuning Harness Pads
Wearing a harness for long periods of time can irritate the skin your shoulders and neck where the shoulder straps are. In that case, you need a set of Schroth Tuning Harness Pads to give you a soft, safe cushion between you and your harness webbing. They can also simply be used as a stylish comfort add-on to your harness or even your factory three-point seat belt.
Made of high quality polyester, these pads can be washed easily and can be installed/removed in seconds. They come in a wide variety of colors with a Schroth Racing patch sewn in. Priced/sold in pairs, one set of Schroth Tuning Harness Pads covers a harness. These are 2" Size.
AeroCatch
AeroCatch 120 Series Flush Mount Hood Pins
$85.95
AeroCatch 120 Series Flush Mount Hood Pins
AeroCatch are installed on some of the fastest race cars on the planet. From Spec Miata to Daytona Prototype, AeroCatch hood pins are every race track every weekend.
AeroCatch 120 Series Plus flush mount hood pin kits consist of lightweight, high-strength glass-reinforced thermoplastic housings containing a hinged, spring-loaded stainless steel pin. This pin engages with the aluminum hood pin forming a secure latch. Compact and aerodynamic, Aerocatch Flush Mount Hood Pins are modern replacements for conventional hood pins, door latches and more. The 120 series are designed to be fitted from above the panel and include a cardboard template to ensure precise cutting and drilling.
Each AeroCatch 120 Hood Pin Kit includes two thermoplastic AeroCatch bodies, two nut fixing plates, two red aluminum strike pins, two rubber bump stops, all necessary fasteners, and an arrow sticker set. Keep your hood, trunk, tailgate, or bonnet shut at high speeds with a set of AeroCatch 120 Series Flush Mount Hood Pins.
AeroCatch 120 Series Flush Mount Hood Pins Details:
Manufacturer: AeroCatch
Manufacturer part number: 120-2000
Hood pin length: 126mm (~ 5.0")
Mounting: above panel
Mount location: top- or side-mount
Hood pin style: flush mount
Hood pin body finish: black
Arai Helmet Limited
Arai GP-5W Helmet Shields
from $85.25
Arai GP-5W Replacement Shields
Replacement shields for the Arai GP-5W auto racing helmet.
Sparco S.p.A.
Sparco Helmet Shields (Stealth RF)
$85.00
Sparco Helmet Shields (Stealth RF)
The Sparco Helmet Shields (Stealth RF) are designed to give you optimal clarity, visibility, and protection on track. Engineered from high-grade optical materials, these visors ensure minimal distortion while offering advanced anti-fog and anti-scratch coatings. Whether you’re running under blazing sun or in evening sessions, the Stealth RF shield keeps your vision sharp and your focus locked on the apex.
High-Performance Clarity for Racing Precision
Developed for Sparco’s premium racing helmet lineup, the Stealth RF visor delivers exceptional light management and UV defense. It’s built to handle everything from bright daylight to low-light endurance conditions, ensuring peak optical performance in all environments. The aerodynamic curvature minimizes wind resistance while maintaining a sleek, professional look for serious racers.
Features
• Compatible with Sparco full-face helmets (RF series)• Optically correct for distortion-free vision• Advanced anti-fog and anti-scratch coatings• UV-resistant for maximum eye protection• Available in multiple tints for varying light conditions• Easy tool-free installation and replacement• Lightweight and impact-resistant construction
Sparco Helmet Shields (Stealth RF) FAQs:
Are these shields compatible with all Sparco helmets? The Stealth RF shields are specifically designed for Sparco RF-series helmets, ensuring a perfect fit and seal.
Do the STEALTH RF shields come in different tints? Yes. They’re available in clear, light smoke, dark smoke, mirrored, and iridium finishes for various lighting conditions.
How do I clean my Sparco helmet shield? Use mild soap and water with a microfiber cloth. Avoid harsh cleaners that can damage the anti-fog coating.
Can I use this shield for night racing? Absolutely. The clear or light smoke variants are ideal for low-light or night track sessions.
Does this shield fit older Sparco models? It’s compatible with most recent RF-series helmets but not older GP or WTX models. Check your helmet’s model number before purchasing.
Upgrade your vision and protection with the Sparco Helmet Shields (Stealth RF) — engineered for racers who demand uncompromising clarity and performance on every lap.
AiM Sportline
AiM Water Thermocouple For Karting (0º-150º C)
$85.00
AiM Sports Water Temp Thermocouple
AiM Sports temperature sensors are the right sensors for AiM loggers and dashes to measure your exhaust gas temperatures (EGT), as well as oil, water, or any other fluid temperature. Their K-type thermocouples and thermoresistor sensors are available in a choice of M5 and M10 threads, as well as ceramic coated or exposed element ends.
Sometimes, racing is just common sense, and ideal operating temperatures can maximize performance. Monitor temperatures with AiM sensors for accurate data to maintain your race engine's optimum efficiency.
This AiM Water Temp Thermocouple has M10 threads at one end and a two-pin connector at the other. Temperature range is 0º to 150º C (32º to 302º F).
Trac-Com
Stilo to Garmin Adapter Cable
$85.00
Stilo to Garmin Adapter Cable
This cable can be used to connect your Garmin Catalyst Driver Performance Optimizer to your Stilo helmet. Includes 3.5mm connector on one end and Stilo male IMSA connector on the other. Made in the USA from thin ROHS-compliant cable.
SKU R AD GARMIN2STILO
Sabelt S.p.A.
Sabelt Seat Slider
$85.00
Sabelt Seat Slider
These seat sliders are recommended for any seat application and allow you to adjust the seat position. The seat tracks employ a double locking mechanisim for increased safety. Features double-locking mechanism for increased safety.
AiM Sportline
AiM Sports Exhaust Gas Temperature (EGT) Thermocouple Sensors
$85.00
AiM Sports EGT Thermocouple Sensors
Add the appropriate AiM Sports Exhaust Gas Temperature sensor to your AiM data set-up to retrieve exactly the information you need to maximize your data acquisition and take your racing to the next level! AiM devices can measure exhaust gas temperature using a sensor – thermocouple – placed in the exhaust header pipe. All AiM thermocouples are K-type sensors and fit car, motorcycle, and karting installations.
Cable length is 250mm (~10 in.)
TEMPERATURE SENSOR TYPES
K-type thermocouple, M5 thread
K-type thermocouple, T12 (CIK-FIA homologated)
Chillout Systems
Chillout Systems Wiring Harness
$85.00
Chillout Systems Wiring Harness
This 10 AWG wiring harness features a 10-foot shock-resistant rubber power cord wrapped in a protective textile fabric. Overall length is 14 feet.
Sabelt S.p.A.
Sabelt Steel Side Mount Brackets
$85.00
Sabelt Steel Side Mount Brackets
For use mounting most side mount racing seats.
FEATURES:
3mm thick
FIA compliant
Standard length
290mm (11.42-inch) bolt pattern
Painted Black
AiM Sportline
AiM Sports 4-Port CAN Data Hub
$85.00
Aim Sports 4-Port Data Hub
The acquisition of the essential data you need to evaluate your race car's performance requires the connection of a lot of peripherals to your AiM data-logger. This, in turn, requires a great number of cables. To solve this problem, AiM developed the Data Hub, a CAN connection multiplier that works as an interface between all AiM data-loggers and their various peripherals.
Extend the capabilities of your AiM data-logger without occupying any more channels or running more cables to your dash. Each AiM 4-Port CAN Data Hub connects up to four CAN peripherals. You can even stack as many as four AiM Data Hubs, multiplying the number of available connections!
Accepts any AiM CAN accessory, including GPS, LCU-One Lambda Controller, Memory Key, or TC (thermocouple) Hubs. Any channel can be selected for display on the dash. Includes a 15-inch cable.
AiM 4-PORT CAN DATA HUB DETAILS
Manufacturer: AiM Sports
Manufacturer part no: X08HUB010
Connectors 1-4: Binder 712 5-pin, female (from peripherals)
Connector 5: Binder 712 5-pin, male (to dash)
Dimensions: 123 x 30 x 23.5mm (4.8 x 1.2 x 0.9 in.)
CAN cable length: 40cm (15.75 in.)
Weight: 97g (3.4 oz.)
Waterproof: IP65
AN EXAMPLE OF A COMPLEX SETUP
Let's take a V-8 race car with an AiM MXG 1.3 dash plus the following peripherals:
One EGT sensor on every cylinder (8)
Two CHT sensors on each cylinder bank (4)
One Lambda sensor on each exhaust header (2)
One GPS09C module
One AiM Memory Key
You would need three TC Hubs and two Data Hubs. The EGT and CHT thermocouples would all connect to the three TC Hubs. The TC Hubs and the GPS09C connected to one 4-Port Data Hub. That Data Hub would be connected, the two Lambda controllers, and the Memory Key connect to a second 4-Port Data Hub. And that Data Hub would connect to your AiM MXG 1.3 dash.
That's sixteen channels monitored by the MXG 1.3 in addition to the other channels still available. That puts an enormous amount of data right at your fingertips!
Sparco S.p.A.
Sparco Land Classic Nomex Gloves
$84.66
$129.00
Sparco Land Classic Nomex Gloves
The Land Classic is Sparco's Land glove in vintage color schemes. The Land Classics is an entry-level competition glove that provides excellent protection and feedback. The ergonomic palm design with reinforced stitching conforms to the hand’s position. The palm has been redesigned with new suede anti-slip fingertip and palm grips to provide greater performance. The elastic wrist and wide range of sizes helps ensure proper fitment. The Land Classic is SFI and FIA approved.
SPARCO LAND CLASSIC NOMEX GLOVE TECHNOLOGY
Ergonomic palm design with reinforced stitching conforms to the hand’s position
New suede anti-slip fingertip and palm grips provide greater performance
Available in Cream or Navy
SFI and FIA 8856-2018 approved
SPARCO LAND CLASSIC NOMEX GLOVE SIZE CHART
Sparco S.p.A.
Sparco Land+ Nomex Gloves
$84.66
$129.00
SPARCO LAND+ NOMEX AUTO RACING GLOVES
The Land + glove is an upgraded version of our popular Land competition glove. The palm has been redesigned with new high-grip silicon printed fingertip and palm to provide greater feedback and control performance. The ergonomic palm design with reinforced stitching conforms to the hand’s position. The elastic wrist and wide range of sizes helps ensure proper fitment. New colors available: Black, Blue, Red and Yellow. The Land + is SFI and FIA approved.
SPARCO LAND+ NOMEX GLOVE TECHNOLOGY
New printed high-grip silicon fingertips and palm
Ergonomic palm design with reinforced stitching conforms to the hand
Elastic wrist support for easy on-off
SFI and FIA approved
SPARCO LAND+ NOMEX GLOVE SIZE CHART
