Sparco
Sparco Martini Polo Pocket
from $85.00
Sparco Martini Polo Pocket
When race day flair meets everyday wear, you get the Sparco Martini Polo Pocket. This sharp cotton polo brings Martini Racing heritage to your off-track wardrobe with subtle performance touches and iconic styling. Whether you're trackside, in the paddock, or grabbing post-session coffee, this polo delivers understated motorsport vibes with premium comfort.
Classic Comfort Meets Martini Racing Legacy
Features:
Iconic Martini Racing StyleIncludes embroidered logos and subtle striping details to channel vintage motorsport cool without going full race suit at dinner.
Everyday Cotton ComfortMade from 100% breathable cotton for all-day wearability—lightweight and race-fan approved.
Functional Chest PocketYes, it's real. And yes, it's perfect for your paddock pass, timing sheet, or that last-minute torque spec.
Tailored European FitRuns slim and sleek—just like your track car. We recommend ordering one size up for optimal fit.
Material: 100% cotton
Sizes: XS–3XL (European sizing—runs small)
Colors: White or Navy
Embroidered Martini Racing logos
Functional front pocket
Sparco Martini Polo Pocket FAQs:
Does the Sparco Martini Polo have a slim fit? Yes, it features a European cut and runs smaller than US sizing. We recommend sizing up.
Can I wear this at the track? Absolutely. It’s casual enough for the pits and polished enough for team dinner.
Is the pocket actually functional? Yes! It’s stitched on and usable—not just for looks. Fits most standard-size pit passes and notes.
Does the logo fade after washing? Not at all. The embroidered logo is durable and stays crisp after repeated washes. Just turn inside out and wash cold for best results.
Add some Italian motorsport class to your casual gear with the Sparco Martini Polo Pocket. It’s comfortable, functional, and quietly lets everyone know you live for apexes and brake markers—even on off days.
AiM Sports
AiM Water Thermocouple For Karting (0º-150º C)
$85.00
AiM Sports Water Temp Thermocouple
AiM Sports temperature sensors are the right sensors for AiM loggers and dashes to measure your exhaust gas temperatures (EGT), as well as oil, water, or any other fluid temperature. Their K-type thermocouples and thermoresistor sensors are available in a choice of M5 and M10 threads, as well as ceramic coated or exposed element ends.
Sometimes, racing is just common sense, and ideal operating temperatures can maximize performance. Monitor temperatures with AiM sensors for accurate data to maintain your race engine's optimum efficiency.
This AiM Water Temp Thermocouple has M10 threads at one end and a two-pin connector at the other. Temperature range is 0º to 150º C (32º to 302º F).
Racing Radios
Racing Radios Vertex VX246 Two-Way Headset Cable
$85.00
Racing Radios Vertex Two-Way Headset Cable
Motorola Two-Way Headset Cable By Racing Radios, Fits Vertex XV 246 series radios. This is the upgraded cable that has 2 thumb screws to securely hold the Vertex single pin connector into your Vertex VX246 radio.
Racing Radios Vertex VX246 Two-Way Headset Cable Details:
Manufacturer: Racing Radios
Manufacturer part number: RDH-246-W
End 1: Vertex 246 male with 2 thumb screws
End 2: Standard Headset Male snap-in fitting
Racing Radios
Racing Radios Motorola 3.5mm Two-Way Headset Cable
$85.00
Racing Radios Motorola 3.5mm Two-Way Headset Cable
FIts Motorola Hand Held Radios with a 3.5mm accessory jack.
Racing Radios
Racing Radios Motorola EX Series Two-Way Headset Cable
$85.00
Racing Radios Motorola EX Series Two-Way Headset Cable
FIts Motorola EX500 and EX600 Series Hand Held Radios
Trac-Com
Stilo to Garmin Adapter Cable
$85.00
Stilo to Garmin Adapter Cable
This cable can be used to connect your Garmin Catalyst Driver Performance Optimizer to your Stilo helmet. Includes 3.5mm connector on one end and Stilo male IMSA connector on the other. Made in the USA from thin ROHS-compliant cable.
SKU R AD GARMIN2STILO
Sabelt
Sabelt Seat Slider
$85.00
Sabelt Seat Slider
These seat sliders are recommended for any seat application and allow you to adjust the seat position. The seat tracks employ a double locking mechanisim for increased safety. Features double-locking mechanism for increased safety.
AiM Sports
AiM Sports Exhaust Gas Temperature (EGT) Thermocouple Sensors
$85.00
AiM Sports EGT Thermocouple Sensors
Add the appropriate AiM Sports Exhaust Gas Temperature sensor to your AiM data set-up to retrieve exactly the information you need to maximize your data acquisition and take your racing to the next level! AiM devices can measure exhaust gas temperature using a sensor – thermocouple – placed in the exhaust header pipe. All AiM thermocouples are K-type sensors and fit car, motorcycle, and karting installations.
Cable length is 250mm (~10 in.)
TEMPERATURE SENSOR TYPES
K-type thermocouple, M5 thread
K-type thermocouple, T12 (CIK-FIA homologated)
Chillout Systems
Chillout Systems Wiring Harness
$85.00
Chillout Systems Wiring Harness
This 10 AWG wiring harness features a 10-foot shock-resistant rubber power cord wrapped in a protective textile fabric. Overall length is 14 feet.
Sabelt
Sabelt Steel Side Mount Brackets
$85.00
Sabelt Steel Side Mount Brackets
For use mounting most side mount racing seats.
FEATURES:
3mm thick
FIA compliant
Standard length
290mm (11.42-inch) bolt pattern
Painted Black
AiM Sports
AiM Sports 4-Port CAN Data Hub
$85.00
Aim Sports 4-Port Data Hub
The acquisition of the essential data you need to evaluate your race car's performance requires the connection of a lot of peripherals to your AiM data-logger. This, in turn, requires a great number of cables. To solve this problem, AiM developed the Data Hub, a CAN connection multiplier that works as an interface between all AiM data-loggers and their various peripherals.
Extend the capabilities of your AiM data-logger without occupying any more channels or running more cables to your dash. Each AiM 4-Port CAN Data Hub connects up to four CAN peripherals. You can even stack as many as four AiM Data Hubs, multiplying the number of available connections!
Accepts any AiM CAN accessory, including GPS, LCU-One Lambda Controller, Memory Key, or TC (thermocouple) Hubs. Any channel can be selected for display on the dash. Includes a 15-inch cable.
AiM 4-PORT CAN DATA HUB DETAILS
Manufacturer: AiM Sports
Manufacturer part no: X08HUB010
Connectors 1-4: Binder 712 5-pin, female (from peripherals)
Connector 5: Binder 712 5-pin, male (to dash)
Dimensions: 123 x 30 x 23.5mm (4.8 x 1.2 x 0.9 in.)
CAN cable length: 40cm (15.75 in.)
Weight: 97g (3.4 oz.)
Waterproof: IP65
AN EXAMPLE OF A COMPLEX SETUP
Let's take a V-8 race car with an AiM MXG 1.3 dash plus the following peripherals:
One EGT sensor on every cylinder (8)
Two CHT sensors on each cylinder bank (4)
One Lambda sensor on each exhaust header (2)
One GPS09C module
One AiM Memory Key
You would need three TC Hubs and two Data Hubs. The EGT and CHT thermocouples would all connect to the three TC Hubs. The TC Hubs and the GPS09C connected to one 4-Port Data Hub. That Data Hub would be connected, the two Lambda controllers, and the Memory Key connect to a second 4-Port Data Hub. And that Data Hub would connect to your AiM MXG 1.3 dash.
That's sixteen channels monitored by the MXG 1.3 in addition to the other channels still available. That puts an enormous amount of data right at your fingertips!
Girodisc
Caliper rebuild kit for Alfa Guilia CCM Front 28mm/32mm/38mm
$84.00
CALPIER REBUILD KIT FOR ALFA GUILIA CCM FRONT 28mm/32mm/38mm
GiroDisc CCRK1-209 front caliper rebuild kit for Alfa Guilia CCM front caliper with 28mm/32mm/38mm seals.
Track days can be especially hard on the piston seals and dust boots in your brake calipers. Heat, in particular, will do a number on them. (Titanium heat shields behind your pads can help with that.) This kit is put together from the highest-quality components to rebuild a brake caliper back to like-new condition.
One kit is required per caliper (we suggest doing them both as long as you're doing it). Once you rebuild them, get the Ti heat shields as well and lengthen the interval between rebuilds. The shields and seals are available as a kit for convenience (and a bit of savings).
We only source superior quality brake components (brakes for track use are serious business); some kits don't take it as seriously. Any questions give us a call, we're happy to help!
Roux Helmets
Roux Clear Shield, Fits Roux R-1 Helmets
$84.00
Roux Clear Shield, Fits Roux R-1 Helmets
Fitting the Roux R-1 helmet family, the clear helmet shield is the perfect choice for late night or inclement weather racing. The clear Roux helmet shields are precision formed and optically correct and will provide many fast laps in style. Don't let a scratched shield make you miss your apex or worse, the podium finish you worked so hard for.
All Roux helmet shields come with adjustable tear-off posts included.
Roux Clear Shield, Fits Roux R-1 Helmets Details:
Manufacturer: Roux
Manufacturer part number: RXHS01-15888
Gradient: Clear
Optically correct: Yes
Tear-off posts included: Yes
[img-6472-left-large_default]
Roux Helmets
Roux Dark Smoke Shield, Fits Roux R-1 Helmets
$84.00
Roux Dark Smoke Shield, Fits Roux R-1 Helmets
Roux dark smoke helmet shields are the ideal addition for your Roux R-1 helmet - perfect for the long summer race weekends. The Roux dark smoke helmet shield offers the darkest tint (approx 80%) from the driver's view making it a great shield for any endurance or late afternoon racer. You will find that Genuine Roux shields are precision formed and optically correct to suit your needs.
All Roux helmet shields come with adjustable tear-off posts included.
Roux Dark Smoke Shield, Fits Roux R-1 Helmets Details:
Manufacturer: Roux
Manufacturer part number: RXHS01-15555
Gradient: Dark Smoke
Optically correct: Yes
Tear-off posts included: Yes
[img-6496-left-large_default]
Roux Helmets
Roux Amber-Yellow Shield, Fits Roux R-1 Helmets
$84.00
Roux Amber/Yellow Shield, Fits Roux R-1 Helmets
Fitting the Roux R-1 helmet family, the amber/yellow helmet shield is not only the perfect choice for late night, overcast, or rain racing, it is an Auto-Crosser's favorite. Make the cones jump out in almost a neon fashion. Auto-X is won by 1/100 of a second. You gave yourself a competitive advantage with your Roux R-1 helmet and the perfect vision amber/yellow Roux helmet shield.
All Roux helmet shields come with adjustable tear-off posts included.
Roux Amber/Yellow Shield, Fits Roux R-1 Helmets Details:
Manufacturer: Roux
Manufacturer part number: RXHS01-15999
Gradient: Amber / Yellow
Optically correct: Yes
Tear-off posts included: Yes
Roux Helmets
Roux Light Smoke Shield, Fits Roux R-1 Helmets
$84.00
Roux Light Smoke Shield, Fits Roux R-1 Helmets
Roux light smoke helmet shields are the perfect addition for your Roux R-1 helmet that cover just enough sun when needed. The light smoke helmet shield offers a mid tint (approx 50%) from the driver's view and is a great shield for any endurance or late afternoon racer. You will find that Genuine Roux shields are precision formed and optically correct to suit your needs.
All Roux helmet shields come with adjustable tear-off posts included.
Roux Light Smoke Shield, Fits Roux R-1 Helmets Details:
Manufacturer: Roux
Manufacturer part number: RXHS01-15444
Gradient: Light Smoke
Optically correct: Yes
Tear-off posts included: Yes
[img-6495-left-large_default]
