All

Sparco Racing Seats ADV Elite Carbon Seat The Sparco ADV Elite Carbon is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating FIA 8862-2009. This means that the Sparco ADV Elite Carbon seat has been tested to an impact of approximately 70G. This rating is required for WRC racing, and the Sparco ADV Elite Carbon seat was specially designed with an upright driving position preferred by Rally drivers. In addition to the Rally driving position, the outer dimensions have been reduced to fit into typically smaller WRC cockpits. With strength at the top of its class, the Sparco ADV Elite carbon seat can withstand over 6,600 lbs. of lateral force. The Sparco ADV Elite carbon seat has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric and special non-slip fabric in the shoulders and seat area. The Sparco ADV Elite carbon seat is FIA approved when mounted with the Sparco #004988ADV side-mount brackets. Sparco Racing Seats ADV Elite Carbon TECHNOLOGY Ultra-light weight Carbon Fiber construction FIA 8862-2009 approved Testing to an impact of 70G Designed for WRC Rally cockpits & driver position Hans device compatible Fire retardant fabric Special non-slip fabric Sparco Racing Seats ADV Elite Carbon DIMENSIONS

Recaro P1300 GT LW Light Weight Racing Seat THE NEXT EVOLUTIONARY STEP Always on the cutting edge of racing seat technology, Recaro's P1300 GT LW is the first racing seat receive FIA certification with a sliding seat adapter (fore/aft adjustment). By continuously optimizing their entire production process, Recaro have improved their top-of-the-line racing shell (the P1300 GT) by 11%. The result is the new P1300 GT LW, combining low weight, maximum safety and individual comfort to place it at the top of the premium racing seat category. Despite its lower weight, this racing shell meets the FIA 8862-2009 standard for "Advanced Racing Seats" and can be adjusted fore-aft thanks to the flexible side mount. Interchangeable pads available in three sizes plus the optional flexible side mount provide drivers with a maximum of individual fitting possibilities. This customizability makes the P1300 GT LW ideally suited for racing applications with frequent and fast driver changeovers. The Recaro P1300 GT LW is homologated for use in GT and touring car sport.   Recaro P1300 GT LW Racing Seat Details: Certified according to FIA 8862-2009 (Advanced Racing Seat) Recaro high-integrity, lightweight, Carbon-Kevlar® carbon fiber reinforced polymer (CFRP) comfort shell FIA certified and crash tested for 10 year’s use in FIA-sanctioned races Includes the P1300 GT flexible adapter, an FIA-certified sliding seat adapter system Side-impact neck protection, developed and optimized in cooperation with HANS to work with head and neck safety systems Recaro proprietary ergonomics: S-shaped backrest with “built-in” lumbar support that protects against spinal compression in high-impact accidents Aggressive thigh & torso bolstering High-quality, shock-absorbing foam in flexible pad system Highly flame-retardant upholstery materials (ISO 3795) Screw-mounted panels and belt slots Suitable for 4, 5, or 6 point harness Recaro P1300 GT LW Accessories: Flexible side mount Pad Kits: S, M, M Mid, and L offer replaceable pads for drivers of small, medium, or large build Lumbar pad Side support pads Helmet support pads Recaro P1300 GT LW pictured with several optional accessories (sold separately).

ÄãThe most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware. Single block calipers in billet aluminium with racing characteristics: lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing. Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick. Pads provide optimum performance in various driving conditions The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.

ÄãThe most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware. Single block calipers in billet aluminium with racing characteristics: lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing. Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick. Pads provide optimum performance in various driving conditions The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.

ÄãThe most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware. Single block calipers in billet aluminium with racing characteristics: lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing. Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick. Pads provide optimum performance in various driving conditions The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.

ÄãThe most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware. Single block calipers in billet aluminium with racing characteristics: lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing. Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick. Pads provide optimum performance in various driving conditions The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.

ÄãThe most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware. Single block calipers in billet aluminium with racing characteristics: lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing. Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick. Pads provide optimum performance in various driving conditions The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.

Brembo Rear 380x28 Rotors & Six-Piston Calipers FITS: BMW M2 (F87) BMW M3 (F80) BMW M4 (F82) The Most Sophisticated High Performance Braking System Ever Manufactured for Your BMW This is a lightweight two-piece rotor and caliper system for racing, track days, and high-performance driving. Brembo's GT System combines increased thermal capacity and lightweight characteristics of 2-piece floating rotors for an extremely versatile and durable system on or off the track. Brembo's GT Systems are designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars. These kits offer superlative performance for both everyday driving and demanding track-day sessions. The heart of the kit consists of monoblock aluminium calipers, machined from a single billet of cast aluminium to ensure outstanding rigidity and minimized deformation under heavy braking. The 2-piece floating rotors supplied in the kit feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled and slotted finishes are designed and executed with meticulous precision. These features in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for the M2, M3, and M4; TUV/DOT homologated metal-braided hoses; plus an adapter and high-quality fastener hardware complete the kit. Racing-Derived Monoblock Calipers in Billet Aluminium Lightweight, rigid and resistant to high temperatures, Brembo's GT-R calipers are made from billet aluminium with a radial 6-piston arrangement. They reduce unsprung weight, improving suspension dynamics and vehicle performance. These Brembo calipers are designed to provide constant, predictable braking strength and a stable, reliable pedal. Individual pistons with stainless steel radiators allow a significant reduction in heat transmission during extreme driving, reducing brake wear and fade to a minimum. Brembo GT-R calipers are nickel plated to guarantee protection against corrosion, providing longevity and high quality in the field. The Brembo logo is CNC machined in red embossing. Two-Piece Floating Discs Reduce Unsprung Weight and Dissipate Heat Quickly GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are 380mm in diameter and 28 in diameter and 28 mm thick. Pads Provide Optimum Performance in Various Driving Conditions The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake lines.

ÄãThe most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware. Single block calipers in billet aluminium with racing characteristics: lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing. Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick. Pads provide optimum performance in various driving conditions The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.

ÄãThe most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware. Single block calipers in billet aluminium with racing characteristics: lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing. Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick. Pads provide optimum performance in various driving conditions The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.

ÄãThe most sophisticated high performance braking system ever manufactured for cars The GT-R braking systems are designed to meet the needs of aggressive braking whether on the road or the track.GT-R is the most advanced expression of all Brembo's experience in braking system design. The GT-R Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware. Single block calipers in billet aluminium with racing characteristics: lightweight, rigid and resistant to high temperatures. The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing. Two piece floating discs to reduce the suspended weight and dissipate heat quickly.GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.The discs are available in sizes of 345 mm and 405 mm, 28 in diameter and 34 mm thick. Pads provide optimum performance in various driving conditions The GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.

Brembo Front 365x29 Rotors & Four-Piston Calipers FITS: BMW Z3 M-Coupe The Most Sophisticated High Performance Braking System Ever Manufactured for Your BMW This is a lightweight two-piece rotor and caliper system for racing, track days, and high-performance driving. Brembo's GT System combines increased thermal capacity and lightweight characteristics of 2-piece floating rotors for an extremely versatile and durable system on or off the track. Brembo's GT Systems are designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars. These kits offer superlative performance for both everyday driving and demanding track-day sessions. The heart of the kit consists of monoblock aluminium calipers, machined from a single billet of cast aluminium to ensure outstanding rigidity and minimized deformation under heavy braking. The 2-piece floating rotors supplied in the kit feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled and slotted finishes are designed and executed with meticulous precision. These features in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for the Z3 M-Coupe; TUV/DOT homologated metal-braided hoses; plus an adapter and high-quality fastener hardware complete the kit. Racing-Derived Monoblock Calipers in Billet Aluminium Lightweight, rigid and resistant to high temperatures, Brembo's GT-R calipers are made from billet aluminium with a radial 4-piston arrangement. They reduce unsprung weight, improving suspension dynamics and vehicle performance. These Brembo calipers are designed to provide constant, predictable braking strength and a stable, reliable pedal. Individual pistons with stainless steel radiators allow a significant reduction in heat transmission during extreme driving, reducing brake wear and fade to a minimum. Brembo GT-R calipers are nickel plated to guarantee protection against corrosion, providing longevity and high quality in the field. The Brembo logo is CNC machined in red embossing. Two piece floating discs to reduce the suspended weight and dissipate heat quickly. GT-R braking systems include two-piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition. The discs are 365 mm in diameter and 29 mm thick. Pads Provide Optimum Performance in Various Driving Conditions The GT-R range offers a series of friction materials able to meet a wide range of driving types. They offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake lines.

Brembo Front 365x29 Rotors & Four-Piston Calipers FITS: BMW M3 (E36) The Most Sophisticated High Performance Braking System Ever Manufactured for Your BMW This is a lightweight two-piece rotor and caliper system for racing, track days, and high-performance driving. Brembo's GT System combines increased thermal capacity and lightweight characteristics of 2-piece floating rotors for an extremely versatile and durable system on or off the track. Brembo's GT Systems are designed and tested specifically for track-day enthusiasts and drivers who demand the utmost performance from their cars. These kits offer superlative performance for both everyday driving and demanding track-day sessions. The heart of the kit consists of monoblock aluminium calipers, machined from a single billet of cast aluminium to ensure outstanding rigidity and minimized deformation under heavy braking. The 2-piece floating rotors supplied in the kit feature an exclusive venting system that improves cooling capacity and increases resistance to cracking caused by thermal shock by over 40%. Cross-drilled and slotted finishes are designed and executed with meticulous precision. These features in the braking surface help dissipate heat and eliminate brake dust and gases. A set of high-performance brake pads with specific friction materials for the E36; TUV/DOT homologated metal-braided hoses; plus an adapter and high-quality fastener hardware complete the kit. Racing-Derived Monoblock Calipers in Billet Aluminium Lightweight, rigid and resistant to high temperatures, Brembo's GT-R calipers are made from billet aluminium with a radial 4-piston arrangement. They reduce unsprung weight, improving suspension dynamics and vehicle performance. These Brembo calipers are designed to provide constant, predictable braking strength and a stable, reliable pedal. Individual pistons with stainless steel radiators allow a significant reduction in heat transmission during extreme driving, reducing brake wear and fade to a minimum. Brembo GT-R calipers are nickel plated to guarantee protection against corrosion, providing longevity and high quality in the field. The Brembo logo is CNC machined in red embossing. Two piece floating discs to reduce the suspended weight and dissipate heat quickly. GT-R braking systems include two-piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition. The discs are 365 mm in diameter and 29 mm thick. Pads Provide Optimum Performance in Various Driving Conditions The GT-R range offers a series of friction materials able to meet a wide range of driving types. They offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake lines.

Forgeline Track Package For McLaren 19" FRONTS AND 20" REARS We've sold hundreds of Forgeline Motorsport Series wheels to customers taking their supercars to the next level, both on the street and at the track. From this experience, we have optimized wheel sizes, offsets, brake and fender clearance, tire sizes, etc., so you get the pinnacle of forged-wheel performance and a customized look while taking the guesswork out of getting everything right. Forgeline's GS1R and GTD1 are the two most popular designs with our McLaren customers, but if you have another Forgeline style in mind give our wheel experts a call at 888-748-7223 and we'll customize a package to your needs. Whether you're upgrading to R-compound street tires, or moving up to Hoosier's incredible R7 track-day tires, we have you covered! Choose your wheel style, select your color, add TPMS and tires if you like, and we'll get your custom Forgeline package started*. It's that easy! BASE PRICES INCLUDE: Two front 19-inch and two rear 20-inch Forgeline wheels, optimized for your McLaren, finished in any standard color, and shipped to your door. ("McLaren" logo machined aluminum center caps are optional.) OPTIONAL TPMS AND TIRES OEM TPMS with stems hard-anodized silver, gunmetal, or black to maintain the functionality of your TPMS system. Choose your tires: Hoosier R7 DOT slicks, TOYO R888R, Pirelli Trofeo R, or Bridgestone RE71R. Tires are professionally mounted and Road Force balanced so everything arrives at your door-step ready to bolt onto your McLaren and go! CALL ANYTIME Of course, if you prefer to talk to one of our Forgeline specialists about options, specs, or with any question you have, just give us a call at 888-748-7223 and we'll help you make the perfect choice! FORGELINE GS1R: Originally designed for professional racing teams competing in the IMSA Continental Tire SportsCar Challenge Grand Sport (GS) class, the Forgeline GS1R exemplifies the latest in advanced wheel technology, including one-piece forged monoblock construction, motorsport engineered design, and I-beamed spokes. It's engineered to withstand the rigors of top-level endurance racing with a 2100 lb. street tire load rating and exceptional deflection stiffness. The GS1R features an open-lug center area for up to a pound in additional weight reduction and improved access to the lugs. Combined with a chamfered outer lip, this enables faster wheel changes. FORGELINE GTD1: The Forgeline GTD1 five-lug is a 10-spoke derivative of Forgeline's race-winning centerlock GTD1 wheel. This wheel features the latest in advanced wheel technology, including one-piece forged monoblock construction, motorsport engineered design, I-beamed spokes and channelled spoke spans. The GTD1 is engineered to withstand the rigors of top-level endurance racing, delivering uncompromised strength and exceptional deflection stiffness. Made from the same forgings and similar design as Forgeline's centerlock GTD1, the GTD1 five-lug wheel has been re-engineered with 10 spokes and features an open lug center to reduce mass and enable easy access to your lug nuts. The GTD1 five-lug is machined from a single forging of 6061-T6 aluminum. And just like any Forgeline wheel, it is available with fully customizable finish options. * Forgeline Competition Series wheels are custom made to order. Lead time is typically three to five weeks from order to shipment.