All

Pagid Racing Brake Pad Shape No. 8240USA Rear Fits the Following Vehicles: Make Model Build (Year) Rear Chevrolet Corvette C6 Grand Sport (multi-pad system) 2010–2013    X Chevrolet Corvette C6 Z06 (multi-pad system) 2006–2013    X This Pagid racing brake pad set consists of eight individual rear brake pads (four for each side). Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid R01 Compound: The R01 features a specially formulated compound designed for both street and light racing applications. This unique blend ensures consistent performance, allowing for quick heat recovery and reliable stopping power, whether you're navigating city streets or tackling a race track.

Pagid Racing Brake Pad Shape No. 1295 Fits the Following Vehicles: Make Model Build (Year) Front Rear BMW 330i [E46] 2000 - 05 X BMW M3 [E36] 3.0 & 3.2 1992 - 99 X BMW M3 [E46] & M3 CSL 2000 - 07 X BMW M5 [E34] 1988 - 97 X BMW Z3 M Coupe [E36] 1998 - 2003 X BMW Z3 M Roadster 3.2i 1997 - 2003 X BMW Z4 M Coupe 2006 - 09 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 2E Compound: RST 2E is perfect as a front axle application in mid-endurance GT and touring car racing, in the range of 2-6h race duration. Front and rear axle application on rally race cars. RST 2 and RST 2E are semi-metallic resin bonded materials containing steel fibers. Cold friction and initial bite make these materials most appropriate for rallying and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Pagid Racing Brake Pad Shape No. 1595 Fits the Following Vehicles: Make Model Build (Year) Front Rear Ferrari 360 Challenge 99 - 05 X Ford Fiesta R2 Tarmac Rally Spec 2016 15 - X Toyota GT86 2.0 GT R3 Rally 15 - X Fits the Following Calipers: Make Type Pad Thickness Shape No. Alcon B type [4441] 16mm, 18mm, 20mm, 22mm, 25mm 1595, 1607, 1674, 8037, 8267 Alcon R5 16mm 1595 Brembo 07.5139. [type 132 or B13 family] 16mm, 20mm, 22mm, 25mm, 26.5mm, 29mm 1595, 1607, 1674, 2704, 8037, 8191 Coleman Series III 16mm 1595 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid RST 4 Compound: RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typically use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing (tarmac and gravel) and for front engine cars. Also used in NASCAR on long ovals.

Ferodo FRP3143W DS1.11 Porsche 997 GT2, GT2 RS, GT3, GT3 RS Rear Brake Pads Fitting the Porsche 997 GT2, GT2 RS, GT3 and GT3 RS, the Ferodo FRP3143W in the DS1.11 compound is a long duration endurance race brake pad that is also used in the Red Group of advanced track day drivers. Featuring a flat torque curve with an intermediate profile, the Ferodo DS1.11 is repeatable across the entire temperature range, making it a great choice for many track drivers and racers. Ferodo FRP3143W DS1.11 Details: Manufacturer: Ferodo Manufacturer part number: FRP3143W-N Compound: DS1.11 Primary Use: Heavy Duty Endurance Race Street use: No Track only: Yes Application: All vehicle types Average Coefficient of Friction: 0.46µ Temperature Range C: 200 - 750 C Temperature Range F: 392 - 1382 F Compatible with ceramic discs: No Compatible with iron discs: Yes Ferodo DS1.11 Brake Compound Details:The Ferodo DS1.11 is a long duration endurance pad with an incredible flat torque curve across the workable range of 392 to 1382 . Designed to put you on the podium of your next World Racing League race, the Ferodo DS1.11 is a track only pad that is designed for repeatable stopping performance and feel across a very wide temperature spectrum. The Ferodo DS1.11 brake compound makes the chassis repeatable in every brake zone, lap after lap. The cold friction profile of the Ferodo DS1.11 is predictable and grows linear as your pad heats up with very good fade resistance all the way to its maximum 1382 F limit. Another common use of the Ferodo DS1.11 is an advanced track day driver in the red group in a well set-up chassis with sticky rubber and aero. Ferodo FRP3143W DS1-11 Porsche Brake Pad Fitment: 2012 Porsche 911 GT3, GT3 RS Iron disc 2012 Porsche 911 Turbo & Turbo Look Iron disc & Ctr Lock Wheels 2012 Porsche 911 Turbo & Turbo Look Iron disc & Std Wheels 2011 Porsche 911 GT3, GT3 RS Iron disc 2011 Porsche 911 Turbo & Turbo Look Iron disc & Ctr Lock Wheels 2011 Porsche 911 Turbo & Turbo Look Iron disc & Std Wheels 2010 Porsche 911 GT3, GT3 RS Iron disc 2010 Porsche 911 Turbo & Turbo Look Iron disc & Ctr Lock Wheels 2010 Porsche 911 Turbo & Turbo Look Iron disc & Std Wheels 2009 Porsche 911 GT3, GT3 RS Iron disc 2009 Porsche 911 Turbo & Turbo Look Iron disc 2009 Porsche 911 Turbo & Turbo Look Type 997 2007 Porsche 911 GT3, GT3 RS Iron disc 2007 Porsche 911 GT3, GT3 RS Type 997 2008 Porsche 911 GT3, GT3 RS Iron disc 2008 Porsche 911 GT3, GT3 RS Type 997 2008 Porsche 911 Turbo & Turbo Look Iron disc 2008 Porsche 911 Turbo & Turbo Look Type 997 2007 Porsche 911 Turbo & Turbo Look Iron disc 2007 Porsche 911 Turbo & Turbo Look Type 997

Pagid Racing Brake Pad Shape No. 8053 Fits the Following Vehicles: Make Model Build (Year) Front Rear BMW 1 Series M Coupe [E82] 11 - 13 X BMW 320i - 330i [E90] 05 - 11 X BMW 335i . 335d [E90/E91/E92] 06 - 11 X BMW M3 [E90 / E92] 07 - 13 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 19 Compound: Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. Pagid RSL 1 Compound: Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RSC 1 Compound (Ceramic Rotors Only): A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RST 1 Compound: Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 2 Compound: The Pagid RST 2 Racing Brake Pads are a medium to high-friction pad designed for Rally, Sprint and Stock car racing. With aggressive in-stop behavior, instant pedal engagement, and a consistently firm feel regardless of temperature, the RST-2 gives maximum power regardless of the conditions. Excellent initial bite with excellent modulation and release characteristics. The medium torque Pagid RST-2 pads are fade resistant up to 800°C, and have the lowest thermal conductivity in the RST line Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Ferodo FCP1307R-N DS3000 Porsche 986 Base Front Brake Pads Fitting the front of the Porsche 986 base model and many others, the Ferodo FCP1307R in the DS3000 compound is a medium torque, track only brake pad. From the working temperature of 392 F to 650 F, the Ferodo DS3000 features a predictable torque curve with an average friction coefficient of 0.48µ. With good cold performance and a very flat torque curve from 450 C (850 F) to 650 C (1202 F) the DS3000 is a popular track day and sprint/intermediate race pad. Ferodo FCP1307R DS3000 Details: Manufacturer: Ferodo Manufacturer part number: FCP1307R-N Compound: DS3000 Primary Use: Track day, mid-range and sprint race Street use: No Track only: Yes Application: All vehicle types Average Coefficient of Friction: 0.48µ Temperature Range C: 200 - 650 C Temperature Range F: 392 - 1202 F Compatible with ceramic discs: No Compatible with iron discs: Yes Ferodo DS3000 Brake Compound Details:The Ferodo DS3000 is a track only brake pad designed with a predictable torque curve and good cold temperature characteristics. The DS3000 compound is a legacy compound with over 25 years of championships due to its predictability and repeatability. The Ferodo DS3000 is a very popular brake pad for vintage racers as the compound characteristics allow for extended disc life at the expense of pad wear. If you have a track car with expensive or hard to replace brake discs, the Ferodo DS3000 is a great choice.The average coefficient of friction of the Ferodo DS3000 is 0.48µ across the workable range of 392 to 1202 F. The cold friction coefficient starts at 0.40µ at 302 and reaches the peak of 0.51µ at 1022 F. This makes for a pad that is great on the early laps of a sprint race but still has the torque needed to maintain consistent pedal feel across a wide temperature range. The Ferodo DS3000 is a popular choice in brake pads for many track drivers and sprint/mid-range racers. Ferodo FCP1307R-N DS3000 Brake Pad Fitment Front Axle: 1997 Porsche Boxster All 1998 Porsche Boxster All 1999 Porsche Boxster All 2000 Porsche Boxster All 2001 Porsche Boxster All 2002 Porsche Boxster 986 non-S 2003 Porsche Boxster All 2004 Porsche Boxster All 2005 Porsche Boxster All 2006 Porsche Boxster All 2007 Porsche Boxster All 2008 Porsche Boxster All 2007 Porsche Cayman All 2009 Porsche Boxster All 2009 Porsche Cayman All 2008 Porsche Cayman All

Spa Extreme Novec SFI 17.1 Fire System 5lb Spare Bottle SPA Technique Extreme Novec 1230 5LB SFI 17.1 certified spare bottle is a complete, ready-to-install, filled and charged 5-lbs. aluminum spare bottle with a mechanical lever valve. SPA Extreme Novec SFI 17.1 Spare Bottle 5lb Details: Manufacturer: SPA Technique Manufacturer part number: EX-SFI5-B Certification: SFI 17.1 Agent: Novec 1230 Toxic: No Conductive: No Clean-up required: No Bottle height: 13.75" Bottle diameter: 4.25"   3M Novec 1230 is not only safer for drivers and crew, but also safer for the environment. It's also non-conductive (i.e., safe for electronics) and leaves no residue to clean up. SPA Technique fire systems are the perfect choice for drivers that want the best in SFI 17.1 certified fire safety. This pressurized fire bottle can only be shipped via Ground.

Pagid Racing Brake Pad Shape No. 8214 Fits the Following Vehicles: Make Model Build (Year) Front Rear Lotus Evora 3.5 2010 - 15      X Lotus Evora 3.5 S (supercharged) 2010 - 14      X Lotus Exige V6 Sport 350 2016 - 19      X Fits the Following Calipers: Make Type Remarks Shape No. AP Racing CP6627 D51 16.7 mm 8214 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.

Carbotech CT1835 Brake Pads Carbotech CT1835 brake pads are available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, and XP24 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT1835 Brake Pad Details: Manufacturer: Carbotech Manufacturer Part Number: CT1835 Hawk cross reference: HB843_604 Material thickness of backing plate and friction material: 15mm Material thickness of backing plate and friction material: .605" Compounds available: 1521, AX6, XP8, XP10, XP12, XP20, and XP24 Carbotech Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Fits: 2016 Cadillac CTS-V

Performance Friction PFC Brake Pads 1609.XX.17.44 PFC Brakes offers a wide range of sports car applications. Each PFC product is meticulously created to the highest performance and technology expectations. For PFC, we take pride in the accomplishments of the drivers and race teams that run our product. With More Championships than Any Other™, PFC are the best brakes on the market. Known around the globe in the Sports Car market, we know It’s Quicker. PFC is involved with numerous Sports Car events across the globe, including: IMSA Continental Tire Sports car Challenge  Porsche Cup Racing Pirelli World Challenge With over 35 years of friction knowledge, and on-track experience, our process enables us to provide you with the proper friction every time. NO COMPROMISES™ All PFC pad compounds have been thoroughly processed and are “Race Ready”. This means very easy burnishing to bed pads and discs.  PFC 11 Compound A new generation sprint and medium-distance friction compound, PFC 11 gives you the ultimate in control and modulation, along with superior disc conditioning. Developed from PFC's ultra-popular 01 compound with improved bite, modulation, and release characteristics. PFC 11 is ultra-smooth, developed to reduce wheel locking at the end of braking while giving more hot and cold bite than the endurance-oriented 08 compound. Brake with ultimate control, modulation, and confidence. PFC 08 Compound One of PFC's most popular compounds which came to fame in Endurance sports car and GT racing due to its performance in applications where smooth initial bite is a must. PFC 08 has a slight friction rise with temperature, with excellent release and modulation characteristics. Despite its considerable performance, PFC 08 has the lowest wear rate of all PFC compounds, easily matching the wear characteristics of competitors' materials but with much higher bite and consistent performance across a broad temperature range. FITMENTS: BMW F2x 2-Series with Sport calipers BMW F3x 3- and 4-Series with Sport calipers BMW F8x M2/M3/M4 (without carbon ceramic brakes) BMW M135i / M140i F20/F21 2011-BMW M2 excluding C/CS 2016-BMW 228i Blue Caliper 2014-BMW 228i xDrive Blue Caliper 2015-BMW 320d / 320i Blue Caliper 2016-BMW 320i xDrive Blue Caliper 2016-BMW 328d xDrive Blue Caliper 2014-BMW 328i 2012-BMW 328i Blue Caliper 2013-BMW 328i M Sport 2016-BMW 328i GT xDrive Blue Caliper 2014-BMW 328i xDrive Blue Caliper 2013-BMW 330i M Sport 2017-BMW 335d xDrive 2013-BMW 335i Sedan 2012-BMW 335i 2013-BMW 335i Blue Caliper 2013-BMW 335i M Sport 2013-BMW 335i Blue Caliper 2014-BMW 335i 2014-BMW 335i M Sport 2014-BMW 335i 2015-BMW 335i Blue Caliper 2015-BMW 335i M Sport 2015-BMW 335i GT xDrive 2014-BMW 335i GT xDrive Blue Caliper 2014-BMW 335i GT xDrive M Sport 2014-BMW 335i GT xDrive 2015-BMW 335i GT xDrive Blue Caliper 2015-BMW 335i GT xDrive M Sport 2015-BMW 335i GT xDrive 2016-BMW 335i xDrive 2013-BMW 335i xDrive Blue Caliper 2013-BMW 335i xDrive M Sport 2013-BMW 340i 2016-BMW 340i GT xDrive 2017-BMW 340i xDrive 2016- BMW M235i 2014-BMW M235i xDrive 2015-BMW M3 2015-BMW M4 2015-BMW 428i Blue Caliper 2014-BMW 428i M Sport 2016-BMW 428i Gran Coupé Blue Caliper 2015-BMW 428i Gran Coupé M Sport 2016-BMW 428i xDrive Blue Caliper 2014-BMW 428i xDrive M Sport 2016-BMW 428i xDrive Gran Coupé Blue Caliper 2015-BMW 428i xDrive Gran Coupé M Sport 2016-BMW 430i M Sport 2017-BMW 430i Gran Coupé M Sport 2017-BMW 430i xDrive M Sport 2017-BMW 430i xDrive Gran Coupé M Sport 2017-BMW 435i Blue Caliper 2014-BMW 435i 2014-BMW 435i M Sport 2014-BMW 435i Gran Coupé 2015-BMW 435i Gran Coupé Blue Caliper 2015-BMW 435i Gran Coupé M Sport 2015-BMW 435i xDrive 2014-BMW 435i xDrive Blue Caliper 2014-BMW 435i xDrive M Sport 2014-BMW 435i xDrive Gran Coupé 2015-BMW 435i xDrive Gran Coupé Blue Caliper 2015-BMW 435i xDrive Gran Coupé M Sport 2015-BMW 440i 2017-BMW 440i Gran Coupé 2017-BMW 440i xDrive 2017-BMW 440i xDrive Gran Coupé 2017-BMW ActiveHybrid 3 2013-BMW ActiveHybrid 3 Blue Caliper 2013-BMW ActiveHybrid 3 M Sport 2013-BMW i8 2015-. .

Sparco Prime-T Racing Shoes The Prime-T racing shoe was originally designed by Sparco for Formula One use and is currently being used by Formula One drivers. Formula One teams are always pushing for weight reductions and that push inspires innovative solutions. The Prime-T is one of the lightest race shoes available. It features a soft leather upper with a full Velcro closure system. The lightweight perforated Velcro closure covers a breathable cloth tongue which is extremely comfortable. The Prime-T has the next generation sole made in pure lightweight rubber which enhances the pedal feel and is also anti-static, fuel and oil resistant. The sole is was designed with a stiff setting for vehicles that require maximum pedal force for braking.  The Prime-T is available in European sizes 37-48 and is FIA approved. SPARCO PRIME -T RACE SHOE TECHNOLOGY Ultra-lightweight soft leather construction Velcro closure system Stiff sole for maximum pedal feel FIA approved 8856-2018

OMP KS-3X ART Kart Racing Suit FIA 8877-2022 Grade 1 Homologated Designed for kart racers who demand both performance and style, the OMP KS-3X ART Kart Racing Suit delivers the latest in lightweight comfort and bold visual impact. Now fully FIA 8877-2022 certified, the KS-3X ART blends OMP’s race-winning heritage with an aggressive graphic design built to stand out on and off the grid. This two-layer suit features breathable, abrasion-resistant fabric and strategically placed stretch panels for unrestricted mobility during intense wheel-to-wheel action. Whether you're battling in a national championship or clocking laps at your local track, the KS-3X ART provides the safety, airflow, and flexibility you need to stay focused and fast. OMP KS-3X ART Kart Racing Suit Features FIA 8877-2022 Grade 1 Certified: Legal for FIA-sanctioned karting worldwide. Three-Layer Construction: Lightweight outer with soft inner lining for optimal comfort. Breathability: Ultra-breathable outer fabric for temperature regulation Mesh inserts at legs, crotch, and underarms maximize airflow. Ergonomic Design: Pre-curved sleeves, low-cut collar, and stretch panels improve mobility and reduce fatigue.  Internal thigh and underarm stretch panels for comfort and fit. Printed Graphics: Modern, race-inspired graphic design with vibrant color options. Bold, full-body design in multiple two-tone color options. Utility Pockets: Two outer pockets for storage on and off track. OMP KS-3X ART Kart Racing Suit Specifications Certification: FIA 8877-2022 Grade 1 Sizes: Euro 42–60 Materials: Lightweight abrasion-resistant shell, breathable mesh inserts Fit: Athletic cut with elastic inserts for movement OMP KS-3X ART Kart Racing Suit Size Chart OMP KS-3X ART Kart Racing Suit FAQs Q: Is the OMP KS-3X ART kart racing suit fireproof?No, this is not a fire suit. The KS-3X ART is designed for karting and provides abrasion protection, not fire resistance. Q: Who is the OMP KS-3X ART kart racing suit best for?Ideal for competitive kart racers of all levels—junior to masters—seeking FIA-approved gear. Q: Is the OMP KS-3X ART kart racing suit lightweight?Yes. The KS-3X ART is engineered for comfort, agility, and cooling airflow during long stints. Q: Where is the OMP KS-3X ART kart racing suit made?Designed and manufactured in Italy by OMP Racing. Q: What does FIA 8877‑2022 certification mean?FIA 8877‑2022 is the newest international safety standard for karting suits, gloves, and shoes. It replaces the older LEVEL 1 and LEVEL 2 classifications with the upgraded GRADE system and includes stricter tests, like abrasion resistance, to ensure higher safety across all racing events. GRADE 1 suits offer entry-level protection, while GRADE 2 delivers motorcycle-level protection for long circuits. This standard also requires homologation holograms to prevent counterfeit gear. Q: Is the OMP KS‑3X ART suit FIA 8877‑2022 certified?Yes, the OMP KS‑3X ART Kart Racing Suit is fully certified to meet the FIA 8877‑2022 standard—ensuring compliance with the latest homologation requirements for top-tier karting competition. Q: When did FIA 8877‑2022 enforcement begin?Homologation under FIA 8877‑2022 began on June 29, 2022. From January 1, 2025, all FIA-sanctioned karting competitions must mandate suits, gloves, and shoes certified to this standard. Q: How does this suit compare to the old Level 2 standards?The GRADE 1 standard now sets a higher protection baseline compared to the previous Level 2 suits. The KS‑3X ART delivers upgraded abrasion resistance and durability through modern materials and construction techniques—even though it’s lighter, it offers better protection overall.

OMP KS-3X Kart Racing Suit FIA 8877-2022 FIA 8877-2022 Grade 1 Engineered for serious racers who demand a blend of safety, comfort, and style, the OMP KS-3X Karting Racing Suit stands out as one of the best karting suits in its class. Certified to the latest FIA 8877-2022 Grade 1 kart suit standard, the KS-3X delivers professional-grade protection while maintaining the breathability and flexibility needed for competitive driving. Whether you're competing at the local, national, or international level, this suit offers the confidence and performance edge every driver needs. As part of the next generation of OMP kart racing suits, the KS-3X features a lightweight three-layer construction with strategically placed breathable mesh panels and elastic inserts for unrestricted movement. Its pre-curved arms and ergonomic design reduce fatigue over long sessions, while the bold modern styling ensures you look as sharp as you drive. Ideal for both youth and adult racers, the KS-3X is the go-to OMP suit for karting enthusiasts who prioritize both function and form. Shop the OMP KS-3X today at —your trusted source for FIA kart suits, expert fitment advice, and fast shipping to keep you race-ready all season long. Designed To Push The Limits When you're pushing the limits of speed, the last thing you need is a restrictive, uncomfortable suit holding you back. The OMP KS-3X Kart Racing Suit is designed for serious racers who demand freedom of movement, durability, and pro-level performance. Whether you're battling for the podium or just shaving tenths off your lap time, this suit delivers everything you need to stay fast, focused, and comfortable. Engineered with lightweight yet durable fabric, an ultra-soft knit inner lining, and a 360° floating arm hole, this suit provides unmatched mobility and breathability while keeping you protected. Plus, with a fresh, modern design available in multiple colorways, you'll look as fast as you drive. Why Choose the OMP KS-3X Karting Suit?  Race-Ready Freedom of MovementThe 360° floating armholes give you unrestricted mobility, allowing for smooth, effortless steering inputs without resistance. Lightweight, Durable ProtectionThe external fabric is tough yet lightweight, designed to withstand the wear and tear of intense racing while keeping you agile on track. Soft, Comfortable InteriorPlush knit inner lining, this suit keeps you comfortable throughout long stints—because the only thing burning up should be your lap times, not your skin. Optimized Fit & FunctionalityA modern, tailored fit enhances aerodynamics without sacrificing comfort. Plus, two outer pockets keep your essentials within reach when you're off-track. Fresh New LookAvailable in a wide range of colors, the KS-3X is designed to match your kart, your gear, and your winning attitude. OMP KS-3X Kart Racing Suit Technical Specifications Material: Lightweight, abrasion-resistant outer fabric with soft knit interior Mobility: 360° floating armholes for full range of motion Comfort: Breathable and moisture-wicking inner lining Storage: Two outer pockets for added convenience Fit: Ergonomic design with a streamlined cut Homologation: FIA 8877-2022 Grade 1 homologation for competitive karting FAQs – Everything You Need to Know about the OMP KS-3X kart Racing Suit Is the OMP KS-3X suit FIA approved?This suit is FIA 8878-2022 Grade 1 certified, meaning it meets the safety requirements for karting competitions. However, it is not FIA-certified for auto racing. How does this compare to the OMP KS-4 suit?The KS-3X offers a more tailored fit, improved breathability, and enhanced mobility thanks to its upgraded floating armholes and premium fabric. What sizes are available?The KS-3X comes in a wide range of sizes from youth (120-160cm height) to EU42-EU60 (US32-US50) to fit kart racers of all ages and body types. Be sure to check the OMP sizing chart before ordering! How should I wash and maintain my suit?Hand wash or machine wash on a gentle cycle with cold water. Do not tumble dry—let it air dry to maintain its shape and performance. What is the difference between a kart suit and an auto racing suit?A karting suit like the OMP KS-3X is designed specifically for kart racing, focused on abrasion protection. It does not include fire-retardant materials, as fire risk in karting is minimal. Auto racing suits, on the other hand, are constructed with fire-retardant fabrics and carry FIA and/or SFI heat- and flame-resistance certifications for protection in automotive racing environments. Where are OMP suits made?OMP racing products, including the OMP KS-3X kart suit, are designed and manufactured in Italy. OMP’s facility in Genoa is known for its high standards of craftsmanship and attention to detail, producing racewear trusted by drivers worldwide. OMP KS-3X Kart Racing Suit Size Chart