Fire Systems

SPA Mechanical Lever Assembly Systems SPA AFFF Mechanical lever valve assembly for all mechanically actuated SPA Technique fire systems used in the Pre-FIA 2018 approved systems. SPA Mechanical Lever Assembly Details: Manufacturer: Spa Technique Manufacturer part number: 02-SP-056 Actuation type: Mechanical Fits Pre-FIA 18 systems: Yes Fits FIA 18 Systems: No Pressure in green band: 8 Bar If your Pre-FIA 2018 Spa Technique discharge lever is damaged, this is the replacement part needed to get you back on track. The Pre-FIA 2018 systems are identified by having 6mm tubing going to the 6mm nozzles. The Pre-FIA 2018 system is charged to 8 Bar compared to the new 16 Bar.

SPA Dip Tube Assembly LWM50 SPA Dip Tube Assembly for all LWM50 Series Fire Systems SPA Dip Tube Assembly LWM50 Details: Manufacturer: Spa Technique Manufacturer part number: 02-SP-169

Part Number: 920-100-008-FIA Bracket & Straps – Medium – Stored PressureFits the following:Zero 2000 2.25ltr Fire Marshal Slimline MechanicalZero 2000 2.25ltr Electric SlimlineZero 360 FIA 2.25kg FE36 Stored Pressure MechanicalZero 360 FIA 2.25kg FE36 Stored Pressure ElectricZero 360 FIA 2.25kg Novec 1230 Stored Pressure MechanicalZero 360 FIA 2.25kg Novec 1230 Stored Pressure ElectricZero 360 FIA 3.0kg Novec 1230 Stored Pressure MechanicalZero 360 FIA 3.0kg Novec 1230 Stored Pressure Electric

Heat Detection Cable Protectowire 356oF / 180oC Priced by the Meter Protectowire is an electrical circuit containing heat-sensitive materials. When the outer covering melts, the wires will make contact and complete the circuit, activating the fire system. This can be a critical extra safety feature especially if the driver becomes incapacitated in an accident. MOUNTING: Mount along the ceiling of the cabin using an "S-pattern". Some additional wiring may be required between the Protectowire and your system's electrical trigger. Use care to not crimp or crease the outer sheath and create a weak spot. Keep away from heat sources including the engine compartment, transmission, differential, exhaust, direct sunlight, or hot surfaces. Keep away from any sharp edges that could cut or cause an abrasion on the sheathing. An inline plug can be used to disconnect the sensor cable during storage, transport, etc. The cable we sell is set to trigger at 356 F (180 C).Currently, Protectowire is only compatible with Lifeline electric systems.

SPA AFFF Discharge Nozzle - 8mm SPA Technique AFFF system 8mm discharge nozzle fits all FIA 18 systems and has a threaded body with jam nut for easy mounting. If you need a replacement SPA Technique fire system discharge nozzle, this is the part. Can I run this SPA discharge nozzle with my aluminum line from another manufacturer? No, SPA Technique Decabon tubing and fittings are unique unto themselves and are not interchangeable with other manufacturers' products. Can I add more SPA Technique discharge nozzles than what my kit came with? Sorry, no. SPA Technique designs each fire system with a specific number of nozzles for complete coverage with the fire-suppression agent available in the fire bottle for that system. If you add nozzles, your system my be unable to deliver enough agent where you it's needed. SPA Lite AFFF Discharge Nozzle 8mm Details: Manufacturer: SPA Technique Manufacturer part number: SP-031 Trade name: Discharge Nozzle Use: replacement of a lost or damaged SPA Technique 8mm discharge nozzle

SPA Technique Internal Fire Button w/ Shroud Spa Technique Replacement Internal Discharge Button w/ Safety Shroud. Used in every Spa Technique electrically discharged fire system, this is an exact SPA replacement Internal Fire System Discharge Button with a red safety guard cover to prevent accidental discharge. SPA Technique Internal Fire Button w/ Shroud Details: Manufacturer: Spa Technique Manufacturer part number: SSP 011 Button Color: Red Contacts: 2 Shroud included: Yes Shroud color: Red Quantity in kit: One

SPA Technique AFFF Discharge Nozzle - 6mm SPA Technique Discharge Nozzle for 6mm Decabon tubing used with SPA fire systems. If you need a replacement SPA fire system discharge nozzle, this is the part. Can I run this SPA Technique Discharge Nozzle with my aluminum line from another manufacturer? You can't. SPA Technique Decabon tubing and fittings are unique unto themselves and are not interchangeable with other manufacturers. Should I add more SPA Technique Discharge Nozzles to my system than it originally came with? You shouldn't. SPA Technique designs each fire system with a precise number of nozzles accounting for the amount of fire suppressant in the fire bottle. Adding nozzles may leave you with too little suppressing agent where you need it most. SPA AFFF Discharge Nozzle 6mm Details: Manufacturer: SPA Technique Manufacturer part number: SP-030 Trade name: Discharge Nozzle Usage: replacing a lost or damaged SPA Discharge Nozzle

SPA Technique Fire System Pull Cable - 12 feet The 12 foot pull cable can be used with all of SPA's mechanical fire systems. Replace a worn or damaged pull cable with this easy to install replacement.

SPA Fire System Pull Cable - 6 Ft The 6-foot pull cable can be used with all of SPA's mechanical fire systems. Replace a worn or damaged pull cable with a Genuine SPA Technique fire system discharge pull cable kit. OEM replacement Manufacturer: SPA Manufacturer Part Number: SPA-02-SP-018 Length: 6'  

  SPA Technique 6" Bottle Mount Bracket Spa Technique Replacement Bottle Mount for all 6" Diameter Bottles. This is included with all Spa Technique systems that include a 6" diameter bottle. Get genuine Spa Technique replacement parts, like this fire bottle mount clamp to keep your race car on-track safely. Fits 4L, 3.375L, 2.25L and Extreme 2.5Kg, 3.0Kg, and 4.0Kg bottles with 6" Diamater. This is quantity one, two are required for install. SPA Technique 6" Bottle Mount Bracket Details: Manufacturer: Spa Technique Manufacturer part number: SPAT 126 Part Type: Bottle Clamp Diameter: 6" Quantity in kit: One

SPA Pressure Gauge 8-12 bar SPA Pressure Gauge 8-12 bar SPA Pressure Gauge 8-12 bar Details: Manufacturer: Spa Technique Manufacturer part number: 02-SP-040 Range: 8-12 bar

  Spa Technique Decabon (Synflex) 10mm Tubing Add Extra Length To Your Spa Techniques Fire System Using Synflex 10mm Tubing (formerly known as Decabon or Decoron 1300). Decabon / Synflex is easy to form, looks professional, and is what is used in 4 Liter and larger AFFF fire suppression systems for discharge tubing. Spa Technique Decabon (Synflex) 10mm Tubing Details: Manufacturer: Spa Technique Manufacturer part number: SP-072 OD: 10mm Part of every Spa Technique 4L and larger AFFF Kit: Yes A thin aluminum inner layer is covered with a thick plastic outer layer. This combination provides the strength and rigidity of aluminum tubing with the lightweight and corrosion resistance of plastic tubing. It is also considerably less expensive than tubing manufactured of corrosion-resistant metal. Synflex can be bent by hand (no special tools required), but it will hold its shape like metal tubing. It can be easily cut with a tubing cutter, wire cutters, or even a shop knife (expect to replace the shop knife blade after cutting this tubing). Sold in continuous 1-foot lengths, cut lengths are not returnable.

Part Number: 920-101-003-FIA

SPA Technique 1/8 NPT x 8mm 90º Fitting SPA Technique 1/8 NPT to SPA 8mm Decabon 90º elbow connector for 8mm Decabon tubing used with SPA firing heads. If you need to install a firing head in a tight location, this is the fitting you need to do it correctly. This SPA Technique 90º degree connector cannot be used with aluminum line from another manufacturer. SPA Technique Decabon tubing and fittings are unique unto themselves and are not interchangeable with products from other manufacturers. SPA Technique 1/8 NPT to 8mm 90º Connector Details: Manufacturer: SPA Technique Manufacturer part number: SP-026-90 Trade name: 1/8 NPT x 8mm 90º Fitting Use: installation of firing heads at 90 degrees from 8mm Decabon tubing

SPA Technique 1/8 NPT x 6mm 90º Fitting SPA 1/8 NPT to SPA 6mm Decabon 90-degree  connector fitting for 6mm Decabon tubing used with SPA firing heads. If you need to install a firing head in a tight location, this is the way to do it correctly. SPA 6mm Straight Connector Details: Manufacturer: SPA Technique Manufacturer part number: SP-021-90 Trade name: 1/8 NPT x 6mm 90 Fitting Usage: Installing a firing head 90 degrees from 6mm tubing Can I run this SPA Technique 90 degree connector fitting with my aluminum line from another manufacturer? No. SPA Technique Decabon tubing and fittings are unique unto themselves and are not interchangeable with products from other manufacturers.