Harnesses & Restraints

Safecraft 7-Point Racing Harness For Elan NP01 Prototype Note: standard six-point harness is pictured for illustrative purposes. Safecraft Restraints are without a doubt the most easily adjustable and secure racing harnesses on the market. The first time you race with a set of Safecraft harnesses will be the last time you'll ever use anything else. This Safecraft Restraint Systems 7-Point Racing Harness is specifically designed for the Èlan NP01 prototype racer. It is available with an SFI rating, typically good for two years. However, Safecraft will re-web your harnesses once for free, extending its life to four years. SMOOTH OPERATORS MADE IN AMERICA The adjusters are buttery smooth, far easier to adjust than any other set of racing harnesses we've tried (when you're in this business, you try them all). The mechanical components are of such high quality you won't believe they haven't been "precision-engineered" in Italy or Germany. We're happy to tell you Safecraft Restraints are made in America -- Chicago, in fact -- by Grand-Am and Tudor United Sports Car Championship driver Charles Espenlaub. SAFECRAFT 7 POINT RACING HARNESS FOR ELAN NP01 DETAILS SFI 16.5 certification Seven-point specialty harness specifically designed to fit the Èlan NP01 Head-and-neck restraint compatible 3"/2" shoulder belts Shoulder belts include wrap-around hardware to mount to a harness bar behind the driver Less bulky, more comfortable 2" lap belts with pull-down adjusters 2" belts are designed to cinch down lower on your hip bone Foam pulls at the ends of the belts make adjusting belts easy, even while wearing Nomex racing gloves Bungee tabs on the shoulder belts to hold them out of the way when not in use Available in Black or Red Safecraft harnesses have a special anti-sub tang integrated into the camlock. This tang must be properly positioned relative to the driver's legs. Because of this, we do not recommend Safecraft harnesses for multi-driver endurance teams in which drivers differ dramatically in size. For teams with similarly-sized drivers, however, this is the ideal harness for quick pit stops.

Safecraft Restraints SFI 6 Point Racing Harness 5010 Safecraft Restraints are without a doubt the most easily adjustable and secure racing harnesses on the market. The first time you race with a set of Safecraft harnesses will be the last time you'll ever use anything else. The adjusters are buttery smooth and far easier to adjust than any other set of racing harnesses we've tried; and when you're in this business, you try them all. The mechanical components are of such high quality you won't believe they haven't been "precision-engineered" in Japan or Germany. SMOOTH OPERATOR MADE IN AMERICA We're happy to tell you Safecraft Restraints are made in America -- Chicago, in fact -- by Grand-Am and Tudor United Sports Car Championship driver Charles Espenlaub. This Safecraft 6 Point Racing Harness comes with an SFI 16.5 rating. SFI-rated harnesses are typically good for two years, but Safecraft will re-web your harness one time at no charge, extending its life to four years. SAFECRAFT SFI 6 POINT RACING HARNESS 5010 DETAILS SFI 16.5 certified Your choice of snap hook or bolt-in mounting for sub and lap belts Shoulder belts include wrap-around hardware to mount to a harness bar behind the driver Head and neck restraint compatible 3"/2" shoulder belts.Less bulky and more comfortable 2" lap belts with pull-down adjusters 2" belts are designed to cinch down lower on your hip bone Foam pulls at the ends of the belts make adjusting belts easy, even while wearing nomex racing gloves Bungee tabs on the shoulder belts to hold them out of the way when not in use Available in Red or Black Safecraft harnesses have a special anti-sub tang integrated into the camlock. This tang must be properly positioned relative to the driver's legs. Because of this, we do not recommend Safecraft harnesses for multi-driver endurance teams with drivers who differ dramatically in size. For teams with similarly sized drivers, however, this is the ideal harness for quick pit stops!

Schroth Clubman 2x2 6 Point Racing Harness Schroth's Clubman has one aim: to provide a superior harness for people needing a lower-cost belt. The Clubman features Frontal Head Restraint (FHR) specific 2” shoulder belts, 2" Clubman pull up lap belts, and a T-bar non adjustable sub strap. Shoulders and sub strap hardware is wrapped in. The FHR specific shoulder belts are designed to make FHR use safer and more comfortable. The full 2" shoulder webbing fits perfecting on a FHR device, creating optimal force distribution on the surface of the device. ADJUSTERS AND OPTIONS The adjusters on the Clubman belt are heavier and not as easy to use. They are, however, cheaper and bring down the overall cost of the harness. In addition the sub strap does not have adjusters and the lap hardware is not interchangeable. Only available with snap-in, pull-up lap belts. Laps are not reversible like they are on the Flexi 2x2. FEATURES: 2” shoulder belts 2” Profi pull-up lap belts with sewn-in snap-in hardware T-bar sub non-adjustable strap Rotary cam lock

Schroth QuickFit Pro 4 Point Harness For the first time, a four-point harness has been designed for use with a HANS device with stock seats! Perfect for HPDE, track day, and driving school cars, the Schroth QuickFit Pro 4 Point Harness provides a safer, more authentic race driving experience by allowing the use of a HANS device. With this harness, you don't have to spend thousands of dollars on a roll bar, new seats, and six-point harnesses to run safely on the track! Coupled with your vehicle’s existing safety systems, the Schroth QuickFit Pro 4 Point Harness is designed to maximize effectiveness of your HANS device. Traditional four-point harnesses are sewn to lap belts, and don’t join at the center cam lock. This creates a six- to eight-inch gap. The Schroth QuickFit Pro 4 Point Harness answers this problem by allowing each shoulder belt to angle towards the cam lock, integrating with the HANS device. The Schroth QuickFit Pro 4 Point Harness works in conjunction with your car’s seat belt pre-tensioner and airbag for additional peace of mind. The Quick Fit Pro clicks into the car’s female seat belt receptacle, notifying the car’s airbag computer that the seat is in use and the driver is restrained. The pre-tensioner is also activated. This device ignites a pyrotechnic charge if an accident happens, tightening the lap belt and holding your driver in snugly. The Schroth QuickFit Pro 4 Point Harness is meant to be used with your car's factory-fitted, stock seats that have passed a seat-back strength test.

The Formula 2x2: Your Go-To Belt for Formula Type Cars The Formula 2x2 features Frontal Head Restraint (FHR) specific 2” shoulder belts, 2" non-adjustable Formula lap belts, and individual non-adjustable sub straps. Individual Sub Straps Make the Formula 2x2 Different The sub straps loop through the lap belts and latch into the shoulder belts. The classic “D” ring used in previous Formula belts has been replaced with sewn-in webbing, creating a more lightweight and comfortable fit. The sub straps are typically anchored very far rearward, almost to the lap belt mounting points. See Schroth Harness Installation documents for more details. This racing harness is typically used in single-seat open-wheeled cars with very reclined seating positions. It's not recommended for use in traditional road-racing sports cars or vehicles with more upright seating positions. Comes with wrapped snap-in attachments at all six points. Bolt-in attachments can be purchased separately. The Formula 2x2 is available in Black or Red. FEATURES: FHR/HANS specific 2” shoulder belts 2” Formula non-adjustable lap belts Individual non-adjustable sub straps Rotary cam lock FIA 8853-2016 approved

Sabelt Porsche GT3/GT4 4 Point Harness Built specifically for the Porsche GT2, GT3, and GT4, these four-point racing harnesses provide all the safety and security you've come to expect from Sabelt in a package that makes adding safety to your Porsche extremely fast and easy. The harness is easily adjusted using the bright yellow tabs that pull down, making securing and releasing your harness simpler than ever. A number of other handy features have been added, including communication/hydration routing on top of shoulder straps and silicone grip on the underside to keep your head-and-neck restraint device securely in place while on the track.Sabelt is an industry leading manufacturer of motorsport harnesses and accessories, for good reason. FEATURES: NOT FIA or SFI CERTIFIED Easily adjusted using the yellow pull-down straps. Velcro patches on shoulder straps for securing loose ends. Communication/hydration routing on shoulder belts keep lines secure and out of the way.

Sabelt Sewn-In Arm Restraints Add-on to Sabelt fire suits. Not for individual sale.

Safecraft Restraint Systems Quick Release Kevlar Head Net  *Picture shown with optional strap adapter.  The Safecraft Restraint Systems Quick-Release Kevlar Head Net adds driver security to your roll cage, preventing ejection in the event of a crash and helping keep the driver's head from impacting the roll cage (depending on orientation to the driver). The push-button quick release gets the net out of the way immediately for emergency egress or driver changes. Safecraft is a premium brand of racing safety equipment, run by racers with products designed and handcrafted in the USA by skilled craftsman. Some sanctioning organizations require a window net system for competition. FEATURES:   Choose SFI 37.1 or FIA 8863/2013 certification (+$45 for FIA) Kevlar webbing Choose Left or Right side Measures: 15" tall (tallest vertical strap) by 26" long (tip to back of web), three 29" attachment straps Includes net and quick-release hardware Standard netting color is black

Safecraft Restraint Systems Kevlar Racing Net This Safecraft Restraint Systems Kevlar Racing Net will change the way you look at racing nets. It installs easily and has the most sophisticated and easily-adjustable ratchet-latch tension adjustment you'll ever use. Specify installation as Left or Center/Right of driver, and SFI or FIA certification. Some sanctioning organizations require a window net system for competition. FEATURES: Available with SFI 37.1 or FIA 8863/2013 certification (+$40 for FIA). Kevlar webbing. Measures 15" tall (on tallest vertical strap) by 26" long (from point to back of web), with three 28"-31" long straps to attach the net in the back. Includes racing net and ratchet-latch tensioner. Standard webbing color is Black.

Sabelt Right Side Net The Sabelt right-side driver's net epitomizes top-tier driver safety, securely fastening to the roll cage of your race car. Crafted from polyester, these nets boast superior durability compared to conventional nylon counterparts, as polyester is less susceptible to UV degradation over time. Considered a vital component of safety gear, we regard right-side nets, also known as "cage nets," as indispensable. In the event of an impact, the body naturally moves forward by 6-8 inches, a crucial mechanism to prevent injury, with the harness providing the necessary stretch to decelerate the body. In lateral impacts, where forces act from the side, a right-side net becomes essential. Without it, the body can easily wrap around the seat when harnesses have stretched, posing a risk of injury. The right-side net prevents this by guiding the head and shoulders back into the seat, averting potential harm. Key Details: Triangular assembly. 1” tribar adjusters. 2” front strap with steel adjuster Ergonomic handle and push button buckle Sabelt nets undergo rigorous testing with dynamic loads to more accurately simulate real-world scenarios. Installation instructions emphasize compliance with FIA requirements, including the necessity of two vertical sections in contact with the seat back for support. Schroth enhances its FIA net by incorporating additional vertical sections, distinguishing it from SFI-rated nets. The FIA recommends installing a net on both sides of the seat for driver restraint, emphasizing the inadequacy of an exterior net alone. The Tudor series enforces this by mandating two interior nets and a window net. FIA guidelines stipulate that the net must be mounted with horizontal sections of webbing on the inside, creating a smooth surface for the driver's helmet to slide down during impact. Sabelt nets facilitate this by allowing reversal on both sides. Sabelt's innovative quick-release design complies with FIA requirements, ensuring the button can be released under load. The new-style quick-release replaces the ratchet strap and metal clasp found in previous nets, offering a lighter and safer alternative.

Sparco 4 Point Racing Harness (3" Shoulder Straps) STRAP IN AND LEVEL-UP YOUR RIDE The Sparco 4 Point Racing Harness is here to redefine your driving experience, turning every ride into a secure, race-ready adventure. And no, we're not just pulling your leg... or should we say, your lap belt? THE SPARCO HARNESS: THE CO-PILOT YOU DIDN'T KNOW YOU NEEDED Unity in safety: Designed to work in perfect harmony with Sparco's competition seats, this harness doesn't just keep you in place; it becomes one with your racing setup. It's like finding the peanut butter to your jelly. Quality that speaks volumes: Crafted from top-notch fabric and boasting durable fasteners, this harness ensures that once you're strapped in, you're in for a secure and comfy ride. No more wiggling around trying to find that sweet spot! Perfect fit: With 2-inch lap and 3-inch shoulder straps, this 4-point masterpiece offers a snug embrace. And thanks to the aircraft-quality quick-release buckle with integrated anti-submarine belts, getting in and out is a breeze—no advanced engineering degree required. Smooth operator: The lightweight steel adjusters are like butter, making tensioning smooth and clamping just perfect. Because who has time for complicated adjustments when the track is calling? Snap to it: Each belt comes with snap-on fixings, making installation a snap (pun intended). And since they're FIA approved, you can hit the track with confidence, knowing you're as safe as can be. SPARCO TECH SPECS TO IMPRESS Lap of luxury: 2" lap belts for that just-right fit. Shoulder the load: 3" shoulder straps to keep you snug without the hug-too-tight feel. Pull for power: Pull-up lap belts for on-the-fly adjustments. Smooth moves: Lightweight steel adjusters for that seamless tensioning. Snap happy: Snap-in Kit Mounting included because who doesn't love convenience? Seal of approval: FIA approved, because your safety is non-negotiable. Imagine hitting each corner with the confidence of a pro, strapped in securely and focused on the finish line, not on your seatbelt. That's what the Sparco 4 Point Racing Harness brings to the table — or should we say, to the driver's seat. Sparco’s full line of harnesses works in unity with most competition seats. Crafted from high-quality fabric and fitted with durable fasteners, each harness restrains the body for added safety and protection. The 4-point harness features 2-inch lap and 3-inch shoulder straps that attach in the center using an aircraft-quality quick-release buckle. The lightweight steel adjusters allow for smooth, quick adjustments and perfect clamping. Each belt attaches to the car using snap-on fixings. Available in pull up only. SPARCO 4 POINT RACING HARNESS DETAILS 2" lap and 3" shoulder straps Pull-up lap belts Light-weight steel adjusters for smooth and quick tensioning Snap-in mounting kit included FIA approved

Schroth Quick-Fit 4-Point Harness The Quick Fit Harness from Schroth is an excellent harness solution for people who have dual-duty cars (track and street). Not many of us have the means to support a full-time race vehicle as well as a street car, and still more of us like driving track-prepared cars on the street. The safest restraint solution is, of course, a 6- or 7-point competition harness, a fixed-back carbon fiber racing seat, a multi-point welded roll cage, and a HANS device. But none of us is going to do that (nor do we recommend it) in our street car. WHAT'S THE NEXT BEST THING? The Schroth Quick Fit Harness is the next best thing. It anchors to factory points, which are load tested to withstand a 3,000-pound force for six seconds. It has ASM (anti-submarine) technology that keeps the lap belt low and your rear end firmly planted in the seat. You don't want the lap belt riding up and squeezing your insides. The Schroth Quick Fit harness is specially designed not to. The Quick Fit Harnesses also take advantage of the factory seat belt pre-tensioner, a device that tightens the belt 1" to 2" in the event of an accident. The airbags will deploy as the engineers of the system intended for someone buckled in. With any other harness, the car wouldn't detect that someone was buckled in, so the airbags would deploy faster and harder. Schroth Quick Fit harnesses also come completely out of the car, giving you full use of your street car for carrying people or cargo. If you have any questions regarding a harness solution for you, please contact us. Please note: These harnesses are designed to be used with the stock, factory-installed seats in vehicles listed in the drop-downs above. These seats have passed a rigorous seat-back strength test to assure the corresponding QuickFit harness can be used safely. QuickFit harnesses are not approved for use with any aftermarket seats, with the following exceptions: Cobra Nogaro Recaro Pole Position ABE This harness is not compatible with HANS or other head-and-neck restraint devices. If you plan on using a HANS, you want the Schroth Quick Fit Pro version.

Schroth Rallye Cross ASM 4 Point Tuning Harness The Schroth Rallye Cross ASM is among the most basic harnesses we sell. There are no quick disconnects between the front and rear sections, just four straps that each bolt to the car (the shoulder belts can also be wrapped around your roll bar). The Schroth Rallye Cross ASM is a four-point harness with Schroth's patented ASM technology, which makes it as safe as a four-point belt can be. What differentiates it from the Schroth Rallye 4 is the shoulder straps. DIRECT MOUNTED SHOULDER STRAPS ADD SAFETY Where the Rallye 4 has a quick-disconnect buckle between the front section of the harness and the tail straps, the Schroth Rallye Cross ASM has two independent shoulder straps that go directly to the mounting point. These shoulder straps can be mounted either by wrapping them around a roll bar/harness bar or by bolting them to the bar or the chassis. The Schroth Rallye Cross ASM harness is perfect for someone who's still using stock seats, but wants a safe harness solution for track driving in a car where access to the back seat is not necessary, or in cars with no back seat to begin with. Note: The harness attachment points for the shoulder straps must be structural. They must not be bolted only to sheet metal or to rear child-seat anchors. They must be properly reinforced, either from the factory or by the use of backing plates. SCHROTH RALLYE CROSS ASM 4 POINT HARNESS DETAILS Manufacturer: Schroth Meets FMVSS 209 specification for use on US roads Waist belt ends: sewn in, bolt to chassis Shoulder belt ends: choose wrap-around or bolt-on Click here for operating and installation instructions In light of recent testing, all Rallye Cross harnesses no longer have a specific Left or Right (Driver or Passenger) side. This harness is not compatible with a HANS or any other head-and-neck restraint device. This harness is not approved for all vehicles and may exceeded the maximum shoulder strap downward angle recommended by Schroth. If you have questions about using it in your car, please give us a call at (888) 748-7223. 

Schroth Rallye 4 ASM Harness The Schroth Rallye 4 is the de-facto standard for anyone looking for a simple, safe, DOT-approved 4 point harness. The technology built into this harness puts it in a category above belts made by other manufacturers. Schroth's years of testing and motorsport experience are brought to bear in making this 4-point harness as safe as it can be. SCHROTH TECHNOLOGY STANDS ABOVE THE REST There are two main reasons why the Schroth harnesses are the only safe 4-point harnesses: first, ASM technology; second, the ability to install the harness using stock mounting locations. ASM stands for "Anti-Submarining". It's an extra flap of technical material sewn into the inboard shoulder belt that prevents you from sliding underneath the lap belt in a crash. In a typical 4-point harness, the two shoulder straps restrain your upper body equally, keeping your chest from moving forward but also pulling up on the lap belts. This allows your pelvis to slide under the lap belt, which can cause serious damage. With ASM, the shoulder belts will elongate at different rates, allowing your torso to turn slightly which forces your pelvis down into the seat cushion. Upon rebound, you will be placed back in an upright position with the belt correctly placed over your body. STOCK MOUNTING POINTS ARE THE STRONGEST Being able to mount a Schroth Rallye 4 ASM harness to stock mounting locations means you're using the points engineered by the car maker to withstand extremely high forces for a specified length of time. That means the mounting bolts won't pull out of the sheet metal. It also means (in the case of a Schroth harness) that you can retain the use of your stock 3-point harness, allowing you the use of the backseat of your car. If you have the need to transport passengers (or cargo) in your backseat, it is possible to disconnect the tailstrap (a feature only Schroth has) and use your normal 3 point belts. See Schroth Harness Installation Checklist Here

Bolt-In Window Net Kit with Schroth Net Our Bolt-In Window Net Kit includes a Schroth ribbon net and is designed to make window net installation fast and easy using normal hand tools. Available in two sizes, the small is 16.5" wide that is perfect for Spec Miata and Honda S2000's while the large 20" wide version fits BMW Spec E46, Trans-Am TA2 and other larger door openings. Installation parts include both weld and clamp on options, with all required hardware included. Bolt-In Window Net Kit with Schroth Net Details: Mounting style: Bolt-in or weld-in Net rating: SFI 27.1 Small size: 16" x 16" Large size: 20" wide x 18.5" tall Part number small left black: WINKIT SGT BLK-NET Part number small left blue: WINKIT SGT BLU-NET Part number small left red: WINKIT SGT RED-NET Part number large left black: WINKIT LGT BLK-NET Part number large left blue: WINKIT LGT BLU-NET Part number large left red: WINKIT LGT RED-NET Upper Mount Bar:The upper bar is secured to the cage using your choice of the included clamp-on bracket or welded tabs. The round upper bar uses a spring-loaded mechanism that fits perfectly between the two mount brackets to provide an easy to install net kit that keeps debris out and hands and arms in. Lower mount Bar:To secure the bottom bar and adjust window net tension, two nylon mounting straps with adjustable lock bars connect the bottom round bar to your roll cage.  Bolt-In Window Net Kit with Schroth Net Contents: Choice of Small 16" x 16" or Large 20" wide x 18.5" tall SFI 27.1 net Long Mounting Tab qty 1 Short Mounting tab qty 1 Mounting band clamps qty 4 Collar Clamps qty 2 Clamp Handle with #6-32x38 screw qty 1 Round Spring Loaded bar (Upper) qty 1 Round Lower Bar qty 1 1 Meter long Bottom Mounting Straps (1” wide) qty 2 3 bar side (1” wide) qty 4

Sub Strap Mount for Porsche LWB   For cars with Porsche OEM CFRP Full Bucket ("Lightweight Bucket" or "LWB") Seats Only. FITMENT: 992 GT3/GT3RS 991.1 & .2 GT3/GT3RS 992 GT3/GT3RS 991.2 GT2RS 981 Cayman GT4 718 Cayman GT4 The Performance Sub Strap Mount is a must-have for Porsche GT2RS, GT3/GT3RS, and GT4 owners using five-, six-, or seven-point harnesses with the factory CFRP Full Bucket Seats (also called Lighweight Bucket Seats). Designed to easily bolt in using existing seat hardware without having to fully remove the seats from the car, the Performance Sub Strap Mount properly anchors your harness anti-submarine straps ("sub straps") to your seat base. The Performance Sub Strap Mount fits either driver- or passenger-side seats. Performance Sub Strap Mounts are designed, manufactured, and powder-coated entirely in-house in the USA. Made of solid steel while only weighing 1.4 lbs (625g), there's not a stronger, more affordable solution available. The Sub Strap Mounts allow full seat adjustment, fore/aft and up/down, while maintaining the ideal sub strap angle to your body for maximum safety.     FEATURES: Solid steel construction for maximum safety Allows full fore/aft and up/down seat adjustment Powder-coated to match OEM seat base Fits driver or passenger seat (Porsche LWB only) Simple to install Compatible with OEM seat belt and airbag hardware