Best selling products

Bell Esteban Ocon 2026 F1 Mini Helmet Celebrate Esteban Ocon’s 2026 Formula 1 season with the Bell HP77 1:2 Scale Esteban Ocon Mini Helmet, a detailed collectible inspired by the helmet worn by Ocon while competing with the Haas F1 Team. Ocon’s 2026 helmet design features a bold red finish with crisp white graphics and his signature Eiffel Tower motif across the top. The distinctive styling gives the helmet an unmistakable look while paying tribute to Ocon’s French identity. Handmade using Bell’s specialized mini-helmet manufacturing process, this collectible recreates the appearance of the full-size Bell HP77 in a compact half-scale format. It is an ideal display piece for Esteban Ocon fans, Haas F1 Team supporters, Formula 1 collectors, and motorsport enthusiasts. Key Features Official 1:2 Scale Replica: Detailed half-scale reproduction of the Bell HP77 Formula 1 helmet. Esteban Ocon 2026 Design: Inspired by Ocon’s distinctive red helmet graphics for the 2026 Formula 1 season. Bold Red and White Graphics: Features a striking red finish highlighted by crisp white detailing. Signature Eiffel Tower Motif: Includes one of the most recognizable elements associated with Ocon’s helmet designs. Handmade Construction: Produced using Bell’s specialized mini-helmet manufacturing process. Detailed Interior: Designed to recreate the character and appearance of a full-size Formula 1 racing helmet at half scale. Display Ready: Ideal for Formula 1 collections, offices, shelves, desks, trophy rooms, and dedicated mini helmet display cases. Presentation Box: Supplied in an individual cardboard presentation box with dedicated graphics. Technical Details Scale: 1:2 scale Helmet Model: Bell HP77 replica Helmet Dimensions: 6.49 x 5.07 x 5.19 in (16.5 x 12.9 x 13.2 cm) Box Dimensions: 7.09 x 5.31 x 5.51 in (180 x 135 x 140 mm) Approximate Packaged Weight: 13 oz (355 g) Materials: Fiber-reinforced plastic, cotton fabric, foam, and hardware Country of Origin: Kingdom of Bahrain Manufacturer Part Number: 4100565 Perfect for Formula 1 Collectors The Esteban Ocon 2026 mini helmet is a distinctive addition to any Formula 1 memorabilia collection. Its compact 1:2 scale makes it easy to display while retaining the bold red graphics and signature design elements associated with Ocon’s race helmet. Whether displayed alongside other Formula 1 mini helmets, Haas F1 Team memorabilia, die-cast models, or Esteban Ocon collectibles, this Bell HP77 mini helmet makes a standout display piece for motorsport enthusiasts. Important Information This product is a collectible display helmet only. It is not a wearable racing helmet, is not approved for motorsport competition, and is not intended for children under 14 years old. FAQ Is this a full-size Esteban Ocon racing helmet?No. This is a 1:2 scale collectible replica inspired by Esteban Ocon’s Bell HP77 Formula 1 helmet. Is this based on Esteban Ocon’s 2026 helmet?Yes. The design is inspired by Ocon’s 2026 Formula 1 season with the Haas F1 Team. Does the helmet include Ocon’s Eiffel Tower design?Yes. The helmet features Ocon’s recognizable Eiffel Tower motif across the top as part of the 2026 graphics. Can this mini helmet be worn?No. This helmet is designed strictly as a collectible display piece and is not intended to be worn. Is this helmet certified for racing?No. The mini helmet carries no motorsport safety certification and must not be used for competition or driving. What are the dimensions of the mini helmet?The helmet measures approximately 6.49 x 5.07 x 5.19 inches (16.5 x 12.9 x 13.2 cm).

Bell Alex Albon 2026 F1 Mini Helmet Celebrate Alex Albon’s 2026 Formula 1 season with the Bell HP77 1:2 Scale Alex Albon Mini Helmet, a detailed collectible inspired by the helmet worn by Albon while competing with Williams Racing. The refreshed 2026 design features a clean white base with chrome-style accents, blue detailing, Alex Albon’s name, and Thai flag elements representing Thailand. The result is a distinctive Formula 1 collectible that closely recreates the appearance of Albon’s full-size Bell HP77 helmet in a compact half-scale format. Handmade using Bell’s specialized mini-helmet manufacturing process, this collectible is ideal for Alex Albon fans, Williams Racing supporters, Formula 1 memorabilia collectors, and motorsport enthusiasts looking for a premium display piece for an office, desk, shelf, trophy room, or dedicated mini helmet collection. Key Features Official 1:2 Scale Replica: Detailed half-scale reproduction of the Bell HP77 Formula 1 helmet. Alex Albon 2026 Design: Inspired by Albon’s updated Williams Racing helmet graphics for the 2026 Formula 1 season. White and Chrome-Inspired Finish: Features a clean white base with distinctive chrome-style and blue detailing. Thai-Inspired Details: Includes Alex Albon’s name and Thai flag elements representing Thailand. Handmade Construction: Produced using Bell’s specialized mini-helmet manufacturing process. Detailed Interior: Designed to recreate the appearance and character of a full-size Formula 1 racing helmet at half scale. Display Ready: Ideal for Formula 1 collections, offices, shelves, desks, trophy rooms, and mini helmet display cases. Presentation Box: Supplied in an individual cardboard presentation box with dedicated graphics. Technical Details Scale: 1:2 scale Helmet Model: Bell HP77 replica Helmet Dimensions: 6.49 x 5.07 x 5.19 in (16.5 x 12.9 x 13.2 cm) Box Dimensions: 7.09 x 5.31 x 5.51 in (180 x 135 x 140 mm) Approximate Packaged Weight: 13 oz (355 g) Materials: Fiber-reinforced plastic, cotton fabric, foam, and hardware Country of Origin: Kingdom of Bahrain Manufacturer Part Number: 4100562 Perfect for Formula 1 Collectors The Alex Albon 2026 mini helmet is an excellent addition to any Formula 1 memorabilia collection. Its compact 1:2 scale makes it easy to display while retaining the distinctive graphics and design elements associated with Albon’s Williams Racing helmet. Whether displayed alongside other Formula 1 mini helmets, Williams Racing memorabilia, die-cast models, or Alex Albon collectibles, this Bell HP77 mini helmet makes a standout piece for motorsport enthusiasts. Important Information This product is a collectible display helmet only. It is not a wearable racing helmet, is not approved for motorsport competition, and is not intended for children under 14 years old. FAQ Is this a full-size Alex Albon racing helmet?No. This is a 1:2 scale collectible replica inspired by Alex Albon’s Bell HP77 Formula 1 helmet. Is this based on Alex Albon’s 2026 helmet?Yes. The graphics are inspired by Albon’s 2026 Formula 1 season with Williams Racing. Does the helmet feature Thai flag details?Yes. The design includes Thai flag elements representing Thailand along with Alex Albon’s name and distinctive blue detailing. Can this mini helmet be worn?No. This helmet is designed strictly as a collectible display piece and is not intended to be worn. Is this helmet certified for racing?No. The mini helmet carries no motorsport safety certification and must not be used for competition or driving. Does it come with a presentation box?Yes. It is supplied in an individual cardboard presentation box featuring dedicated graphics. What are the dimensions of the mini helmet?The helmet measures approximately 6.49 x 5.07 x 5.19 inches (16.5 x 12.9 x 13.2 cm).

Bell Fernando Alonso 2026 F1 Mini Helmet Celebrate Fernando Alonso’s 2026 Formula 1 season with the Bell HP77 1:2 Scale Fernando Alonso Mini Helmet, a detailed collectible inspired by the helmet worn by Alonso while competing with the Aston Martin Formula One Team. This half-scale display helmet recreates the unmistakable look of Alonso’s full-size Bell HP77 in a compact collectible format. The 2026 design features his signature blue and yellow Asturias-inspired color scheme, Spanish flag accents, and sharp racing graphics associated with one of Formula 1’s most recognizable drivers. Handmade using Bell’s specialized mini-helmet manufacturing process, this collectible is designed for Formula 1 fans, Fernando Alonso supporters, motorsport memorabilia collectors, and anyone looking for a premium display piece for an office, shelf, desk, trophy room, or dedicated mini helmet collection. Key Features Official 1:2 Scale Replica: Detailed half-scale reproduction of the Bell HP77 Formula 1 helmet. Fernando Alonso 2026 Design: Inspired by Alonso’s 2026 Aston Martin Formula One Team helmet graphics. Asturias-Inspired Colors: Features Alonso’s signature blue and yellow color combination. Spanish Flag Accents: Red detailing pays tribute to Alonso’s Spanish heritage. Handmade Construction: Produced using Bell’s specialized mini-helmet manufacturing process. Detailed Interior: Designed to recreate the appearance and character of a full-size racing helmet at half scale. Display Ready: Ideal for Formula 1 collections, offices, desks, shelves, trophy rooms, and mini helmet display cases. Presentation Box: Supplied in an individual cardboard presentation box featuring dedicated graphics. Technical Details Scale: 1:2 scale Helmet Model: Bell HP77 replica Helmet Dimensions: 6.49 x 5.07 x 5.19 in (16.5 x 12.9 x 13.2 cm) Box Dimensions: 7.09 x 5.31 x 5.51 in (180 x 135 x 140 mm) Approximate Packaged Weight: 13 oz (355 g) Materials: Fiber-reinforced plastic, cotton fabric, foam, and hardware Country of Origin: Kingdom of Bahrain Manufacturer Part Number: 4100556 Perfect for Formula 1 Collectors The Fernando Alonso 2026 mini helmet is an excellent addition to any Formula 1 memorabilia collection. Its compact 1:2 scale makes it easy to display while retaining the distinctive graphics and visual details associated with Alonso’s racing helmet. Whether displayed alongside other Formula 1 mini helmets, driver memorabilia, die-cast models, or Aston Martin collectibles, the Bell Fernando Alonso HP77 mini helmet makes a standout centerpiece for motorsport enthusiasts. Important Information This product is a collectible display helmet only. It is not a wearable racing helmet, is not approved for motorsport competition, and is not intended for children under 14 years old. FAQ Is this a full-size Fernando Alonso racing helmet?No. This is a 1:2 scale collectible replica of Fernando Alonso’s Bell HP77 Formula 1 helmet. Is this based on Fernando Alonso’s 2026 helmet?Yes. The graphics are inspired by Alonso’s 2026 Formula 1 season with the Aston Martin Formula One Team. Can this mini helmet be worn?No. This helmet is designed strictly as a collectible display piece and is not intended to be worn. Is this helmet certified for racing?No. The mini helmet carries no motorsport safety certification and must not be used for competition or driving. Does it come with a display box?It is supplied in an individual cardboard presentation box with dedicated graphics. What are the dimensions of the mini helmet?The helmet measures approximately 6.49 x 5.07 x 5.19 inches (16.5 x 12.9 x 13.2 cm).

Bell Franco Colapinto 2026 F1 Mini Helmet Celebrate Franco Colapinto’s 2026 Formula 1 season with the Bell HP77 1:2 Scale Franco Colapinto Mini Helmet, a detailed collectible inspired by the helmet design worn by Colapinto with the BWT Alpine Formula One Team. The 2026 design combines Argentina’s signature sky blue and white colors with Alpine-inspired graphics, metallic details, geometric patterns, and Colapinto’s number 43. The result is a distinctive half-scale collectible that captures the appearance of the full-size Bell HP77 in a compact display-ready format. Handmade using Bell’s specialized mini-helmet manufacturing process, this collectible is ideal for Franco Colapinto fans, Alpine supporters, Formula 1 memorabilia collectors, and motorsport enthusiasts looking for a standout display piece for a home, office, shelf, desk, or dedicated mini helmet case. Key Features Official 1:2 Scale Replica: Detailed half-scale reproduction of the Bell HP77 Formula 1 helmet. Franco Colapinto 2026 Design: Inspired by Colapinto’s 2026 BWT Alpine Formula One Team helmet graphics. Argentine-Inspired Colors: Features sky blue and white elements inspired by Argentina. Number 43 Details: Includes Colapinto’s racing number as part of the helmet artwork. Alpine-Inspired Graphics: Incorporates metallic details and geometric patterns that enhance the design. Handmade Construction: Produced using Bell’s specialized mini-helmet manufacturing process. Detailed Interior: Designed to recreate the appearance and character of a full-size Formula 1 racing helmet at half scale. Display Ready: Ideal for Formula 1 collections, offices, shelves, desks, and display cases. Presentation Box: Supplied in an individual cardboard presentation box with dedicated graphics. Technical Details Scale: 1:2 scale Helmet Model: Bell HP77 replica Helmet Dimensions: 6.49 x 5.07 x 5.19 in (16.5 x 12.9 x 13.2 cm) Box Dimensions: 7.09 x 5.31 x 5.51 in (180 x 135 x 140 mm) Approximate Packaged Weight: 13 oz (355 g) Materials: Fiber-reinforced plastic, cotton fabric, foam, and hardware Country of Origin: Kingdom of Bahrain Manufacturer Part Number: 4100567 Perfect for Formula 1 Collectors The Franco Colapinto 2026 mini helmet is a standout addition to any Formula 1 memorabilia collection. Its compact 1:2 scale makes it easy to display while preserving the unique color combination, number details, and Alpine-inspired styling associated with Colapinto’s helmet design. Whether displayed alongside other Formula 1 mini helmets, BWT Alpine memorabilia, die-cast models, or driver collectibles, this Bell HP77 mini helmet makes an eye-catching display piece for motorsport enthusiasts. Important Information This product is a collectible display helmet only. It is not a wearable racing helmet, is not approved for motorsport competition, and is not intended for children under 14 years old. FAQ Is this a full-size Franco Colapinto racing helmet?No. This is a 1:2 scale collectible replica inspired by Franco Colapinto’s Bell HP77 Formula 1 helmet. Is this based on Franco Colapinto’s 2026 helmet?Yes. The graphics are inspired by Colapinto’s 2026 Formula 1 season with the BWT Alpine Formula One Team. Does the helmet feature Colapinto’s number 43?Yes. The design includes Colapinto’s number 43 as part of the helmet artwork. Can this mini helmet be worn?No. This helmet is designed strictly as a collectible display piece and is not intended to be worn. Is this helmet certified for racing?No. The mini helmet carries no motorsport safety certification and must not be used for competition or driving. What are the dimensions of the mini helmet?The helmet measures approximately 6.49 x 5.07 x 5.19 inches (16.5 x 12.9 x 13.2 cm).

ChillOut Motorsports IceBox 12V Automotive Hardwire Kit Keep your ChillOut Motorsports IceBox powered directly from your vehicle with the IceBox 12V Automotive Hardwire Kit. Designed as a simple alternative to running the IceBox from a portable power pack, this kit connects the cooler's USB Type-C power input directly to your vehicle's 12V electrical system. The 10-foot cable provides plenty of length for clean routing through a race car, track car, or support vehicle, while the bare-wire connection allows for a permanent or semi-permanent installation. With direct vehicle power, there is no battery pack to recharge or swap between sessions. Key Features Designed for the ChillOut Motorsports IceBox cooling system USB Type-C connector to bare-wire power leads Connects the IceBox directly to a vehicle's 12V electrical system 10 ft / 3048 mm cable length Rated for up to 3 amps Eliminates the need to rely on a separate portable power pack Ideal for race cars, track cars, and other motorsports applications Provides continuous IceBox power while the vehicle electrical system is supplying power Direct 12V Power for Your IceBox For drivers who want a more permanent IceBox installation, the 12V Automotive Hardwire Kit provides a clean way to integrate the cooling system into the vehicle. Instead of monitoring and recharging a separate battery pack, the IceBox can receive power directly from the car. This setup is especially useful for endurance racing, track days, HPDE events, and other applications where the cooling system may be used for extended periods throughout the day. Specifications Connection: USB Type-C to bare wire Input application: 12V automotive electrical system Cable length: 10 ft / 3048 mm Current rating: 3 A Application: ChillOut Motorsports IceBox Installation Notes The bare-wire end of the harness is intended to be connected to an appropriate 12V power source in the vehicle. Proper circuit protection and wiring practices should be used when integrating accessories into any automotive electrical system. Route the cable away from excessive heat, sharp edges, moving components, and other areas that could damage the wiring. Frequently Asked Questions Q: What does the IceBox 12V Automotive Hardwire Kit do?A: It allows the ChillOut Motorsports IceBox to receive power directly from a vehicle's 12V electrical system instead of relying on a separate portable power pack. Q: What connectors are included?A: The kit uses a USB Type-C connector for the IceBox and bare wires on the vehicle side for installation into a 12V electrical circuit. Q: How long is the cable?A: The cable is approximately 10 feet, or 3048 mm, long. Q: What is the amperage rating?A: The hardwire kit is rated for up to 3 amps. Q: Does this replace the IceBox power pack?A: It provides an alternative way to power the IceBox directly from the vehicle, eliminating the need to use a portable power pack while the hardwired system is supplying power. Q: Is this intended for permanent installation?A: It can be used for a clean permanent or semi-permanent vehicle installation depending on how the 12V connection is configured.

Premium FIA Racing Restraint for Endurance, GT and High-Level Track Cars The Sabelt Enduro Platinum Full 2" is designed for drivers who want more than basic FIA compliance from their restraint system. This six-point harness combines Sabelt's top-level endurance hardware with a compact, driver-focused design built around fast adjustment, clean cockpit packaging, and compatibility with modern frontal head restraint systems. What separates the Enduro Platinum from a conventional racing harness is not one oversized feature. It is the collection of small engineering decisions that make the harness easier to live with once it is installed in a real race car: a billet-machined camlock, pull-down lap adjustment positioned close to the driver, full 2-inch shoulder webbing, compact sub-belt integration, and lightweight hardware designed for serious competition use. For endurance racers, multi-driver teams, and owners building premium GT or track cars, the Enduro Platinum is one of Sabelt's most complete restraint systems. What Makes the Enduro Platinum Different? Nearly every properly selected FIA racing harness has the same basic job: hold the driver securely in position and manage occupant loads during an impact. The differences between entry-level and flagship systems are often found in how well the harness integrates into the cockpit and how easily the driver can use it. The Enduro Platinum is engineered around those details. The lap belts use pull-down adjustment close to the center buckle, making them easier to access once the driver is seated. The center camlock is machined rather than treated as generic hardware. The 2-inch shoulder belts are well suited to modern HANS and FHR devices. The overall package is compact and deliberate, which matters in cars with deep side bolsters, halo seats, narrow cockpits, or multiple drivers sharing the same seating position. Sabelt Enduro Platinum Key Features FIA 8853-2016 homologated six-point racing harness Full 2-inch belt configuration 2-inch shoulder belts designed for modern FHR and HANS use Billet-machined lightweight camlock assembly Guided buckle-entry design for easier belt-tongue engagement Integrated pull-down lap-belt adjusters Lap adjustment located close to the center buckle Compact sub-belt integration Lightweight shoulder-belt hardware High-visibility adjustment loops Shoulder-area grip treatment to help belt positioning Designed for endurance, GT, touring, and professional motorsport use Available in Black, Blue, and Red Easy Adjustment Is More Important Than It Sounds A harness that is difficult to adjust is inconvenient in any race car. In a multi-driver endurance car, it can become a real problem. Different drivers often require substantially different lap and shoulder settings. One driver may sit low and close to the wheel while another may need more seat travel or a different seating position. During a pit stop, the incoming driver and crew need to make those adjustments quickly and confidently. The Enduro Platinum's lap adjusters are positioned near the buckle, where they remain accessible even when the driver is surrounded by deep seat bolsters and cockpit hardware. Instead of reaching toward an adjuster buried near the side of the seat, the driver can tighten the lap section using a natural pull-down motion. This is one of the most useful characteristics of the Platinum and one of the biggest reasons it makes sense for cars shared by multiple drivers. Why Lap-Belt Position Matters The lap belts are designed to restrain the pelvis, not the abdomen. For that reason, both mounting geometry and adjustment are critical. A properly positioned lap section should sit low across the driver's pelvis and remain securely tensioned. If the belt is difficult to reach or tighten once the driver is seated, achieving that position can become more difficult than it needs to be. Sabelt's pull-down configuration gives the driver direct access to the lap adjustment area, making it easier to fine-tune fit after settling into the seat. For a premium restraint system, ease of adjustment is not simply a convenience feature. It supports more consistent belt positioning every time the car goes on track. Billet Camlock and Premium Hardware The center buckle is one of the defining features of the Enduro Platinum. Sabelt uses a billet-machined camlock designed to reduce unnecessary bulk while providing a precise, high-quality engagement point for the harness tongues. The buckle-entry areas are shaped to help guide the tongues into position, which is particularly useful when the driver or crew member is working by feel rather than looking directly at the buckle. This kind of refinement becomes noticeable in cars where the harness is frequently connected, released, and adjusted. Why Pay More for Better Hardware? The answer is not simply appearance or weight. Premium hardware improves the way the system functions in daily use. A cleaner buckle, accessible adjusters, and reduced component bulk make the harness easier to operate and easier to package inside a crowded cockpit. If you only need FIA compliance, less expensive harnesses exist. If you want a more refined restraint system that feels engineered rather than assembled, the Platinum begins to justify its price. Designed Around Modern HANS and FHR Devices The Enduro Platinum uses 2-inch shoulder belts rather than the wider 3-inch shoulder webbing found on many traditional harnesses. That narrower belt width is well suited to the contact surface of modern frontal head restraint systems. The belt sits naturally on the shoulder section of a HANS-style device and avoids the excess width associated with older harness designs. Sabelt also incorporates grip treatment in the shoulder area to help the belts remain positioned on the FHR device during use. For drivers already using a modern helmet, racing seat, and FHR, the 2-inch configuration provides a cleaner overall restraint package. Where the Enduro Platinum Makes the Most Sense Endurance Racing This is the Platinum's natural environment. Driver changes place a premium on adjustment speed, accessibility, and ease of engagement. The harness is designed with those exact situations in mind. GT and Touring Cars Deep racing seats and narrow cockpit openings can make traditional belt adjusters difficult to reach. The Platinum's more central adjustment points work particularly well in these installations. High-End Track Cars A properly prepared Porsche, BMW, Corvette, Ferrari, Lotus, Radical, or similar track car can benefit from the same compact packaging and premium hardware even when it is not being used in long-distance competition. Shared Driver Cars If multiple drivers regularly use the same car, the ability to quickly change belt tension and fit can make the Platinum considerably more useful than a conventional fixed-adjustment harness. Professional and Club Racing The Enduro Platinum is appropriate for professional-level builds but is not limited to professional competition. It can also make sense in serious club-racing cars where the owner wants top-level equipment and ergonomics. Technical Specifications Specification Details Manufacturer Sabelt Model Enduro Platinum Full 2" Harness Type 6-Point Homologation FIA 8853-2016 Shoulder Belt Width 2" Lap Belt Width 2" Sub-Belt Width 2" Lap Adjustment Pull-Down Camlock Billet-Machined Lightweight Assembly FHR Compatible Yes Primary Use Endurance, GT, Touring and Track Competition Colors Black, Blue, Red Is the Enduro Platinum the Right Harness for You? The Enduro Platinum is not automatically the best harness for every driver. If you are building a straightforward club-racing car and primarily need an FIA 8853-2016 restraint system at the lowest practical cost, you may be better served by a less expensive Sabelt model. The Platinum becomes the better choice when you value: Faster adjustment between drivers Compact cockpit packaging Premium machined hardware Easy-access lap adjusters Modern 2-inch FHR-friendly shoulder belts Reduced bulk around the buckle area Professional-level fit and finish Those features are especially valuable in endurance cars, high-end track builds, and vehicles where the rest of the safety system has already been selected at a similar level. Enduro Platinum vs. a Conventional FIA Harness Feature Sabelt Enduro Platinum Typical FIA Harness FIA Homologation FIA 8853-2016 Varies by Model Shoulder Belt Width Full 2" 2" or 3" Lap Adjustment Integrated Pull-Down Varies Center Buckle Billet-Machined Premium Camlock Conventional Camlock Driver-Change Focus High Varies Cockpit Packaging Compact and Endurance Focused Standard Best Use Endurance, GT, Premium Track Builds General Competition Use The key takeaway is that the Platinum's value is not simply its FIA label. The premium lies in how the harness functions once installed. Installation and Compatibility A high-end harness still depends on correct installation. Before ordering, verify that your racing seat, roll structure or harness bar, floor mounting points, and driver position can accommodate a six-point harness with the correct geometry. Shoulder-Belt Routing The shoulder belts should pass cleanly through the racing seat and terminate at approved structural mounting points. Correct routing is important for both driver restraint and proper interaction with the FHR device. Lap-Belt Routing The lap belts must sit low across the pelvis and route through the appropriate seat openings without being forced upward by the seat shell or bolsters. Sub-Belt Routing The anti-submarine belts must pass through the correct openings beneath the driver and attach to suitable structural mounting points. Their angle and position are part of the overall restraint geometry. Think of the Harness as One Part of a System The harness should be selected together with the racing seat, seat mounts, FHR device, helmet, rollover protection, driver nets, and seating position. A restraint system works best when all of those components are designed to work together. Discovery Parts Expert Tip Before choosing a harness, sit in the car with your seat, HANS device, helmet, and normal driving gear and determine where the lap adjusters will actually end up. On many deeply bolstered seats, conventional adjusters can disappear between the driver and the seat shell. That makes tightening the belts unnecessarily difficult. If your cockpit is narrow or your car is shared by multiple drivers, the Enduro Platinum's buckle-side pull-down adjustment can be one of its most valuable features. Frequently Asked Questions Is the Sabelt Enduro Platinum FIA homologated? Yes. The Enduro Platinum Full 2" is homologated to FIA 8853-2016. Always verify that this standard is accepted by your race series or sanctioning organization. Is this a six-point harness? Yes. It uses two shoulder belts, two lap belts, and two anti-submarine belts. Is the Enduro Platinum compatible with HANS devices? Yes. The full 2-inch shoulder configuration is particularly well suited to modern HANS and other frontal head restraint systems. Why does Sabelt use 2-inch shoulder belts? The narrower shoulder webbing sits naturally on the bearing surface of modern FHR devices and creates a cleaner interface than wider traditional shoulder belts. What does pull-down adjustment mean? It refers to the direction the free end of the lap belt is pulled to tighten the harness. On the Platinum, the adjusters are positioned near the center buckle and the driver pulls downward and away from the buckle. Is the Enduro Platinum intended only for endurance racing? No. Endurance racing is where its design advantages are most obvious, but it can also be an excellent choice for GT cars, club-racing cars, and premium track vehicles. Is it worth the price for HPDE? That depends on the car and how it is used. For a basic HPDE build, a less expensive FIA harness may make more sense. For a high-end track car, a shared-driver vehicle, or a cockpit where adjustment access is difficult, the Platinum can be easier to justify. What is special about the camlock? The Platinum uses a billet-machined lightweight camlock with a guided entry design intended to make engaging the belt tongues easier. Can more than one driver use the harness? Yes. Multi-driver use is one of the strongest applications for the Platinum because its adjustment system makes belt changes between drivers easier. Can the Enduro Platinum be installed with a factory seat? It is intended to be used as part of a properly prepared motorsport restraint system with a compatible racing seat, appropriate mounting points, and other required safety equipment. Do I need a harness bar? The shoulder belts require suitable structural mounting. Depending on the vehicle, that may be a harness bar, cage tube, or another approved mounting solution. Can I use the harness without an FHR device? Harness use should be evaluated as part of the complete safety system and according to the rules of your event. For modern competition use, an appropriate FHR device is strongly recommended. Does an FIA racing harness expire? Harness validity depends on the FIA label and the rules of your sanctioning organization. Always check the specific harness label and current event regulations. Should the harness be replaced after a crash? Any harness involved in a significant impact should be inspected in accordance with manufacturer and sanctioning-body guidance. Replace it if there is any doubt about the condition of the webbing, stitching, buckle, adjusters, or hardware. What colors are available? The Enduro Platinum is available in Black, Blue, and Red, subject to inventory availability. Why Buy from Discovery Parts? Choosing the right harness is not just about matching a certification number. Belt width, adjustment direction, mounting geometry, racing seat design, FHR compatibility, and cockpit space all affect which system makes the most sense for your car. Discovery Parts can help you compare the Enduro Platinum with other Sabelt harnesses and alternative restraint systems so you can choose based on your actual installation and type of driving. If you know the Platinum is the right fit, select your preferred color and order online. If you are still comparing options, contact us with your vehicle, racing seat, and intended use and we can help narrow down the right configuration. Should You Choose the Sabelt Enduro Platinum? Choose the Enduro Platinum if you want Sabelt's highest-level endurance restraint system and place real value on adjustment access, compact hardware, FHR integration, and cockpit refinement. It is not the least expensive way to install an FIA 8853-2016 harness, and that is not what it is trying to be. The Platinum is for the driver who wants the harness to work as well in the car as it looks on the specification sheet. For endurance teams, shared-driver cars, premium GT builds, and serious track vehicles, that distinction can be worth the investment.

Bell 1:2 Scale Oliver Bearman Haas 2026 F1 Mini Helmet Celebrate Oliver Bearman's 2026 Formula 1 season with the Bell 1:2 Scale F1 Mini Helmet Oliver Bearman / Haas. This premium collectible recreates the helmet design worn by Bearman with Haas F1 Team in the 2026 Formula 1 World Championship, capturing the bold colors, graphics, and details of his full-size Bell HP77 race helmet. Featuring a brighter blue, yellow, and white color palette along with Bearman's distinctive bear graphic, this half-scale replica is designed for Formula 1 fans, Haas supporters, and serious motorsport collectors who want an authentic display piece tied directly to one of the sport's rising young drivers. Manufactured by Bell Racing Helmets using processes and materials inspired by its full-size racing helmets, the Oliver Bearman 2026 Mini Helmet delivers exceptional detail, premium construction, and a highly authentic appearance. Official Oliver Bearman 2026 Helmet Design This 1:2 scale collectible replicates the helmet design used by Oliver Bearman during the 2026 Formula 1 season with Haas F1 Team. The design features a vibrant combination of blue, yellow, and white along with Bearman's recognizable bear motif, creating a distinctive helmet that reflects both his identity and British racing heritage. From the shell graphics to the visor and interior detailing, Bell has recreated the look of Bearman's full-size HP77 helmet in a compact display format. Authentic Bell HP77 Half-Scale Replica The Oliver Bearman 2026 Mini Helmet is modeled after Bell's HP77 Formula 1 racing helmet and manufactured at approximately half the size of the full racing helmet. Bell produces its F1 mini helmets using manufacturing methods derived from its full-size competition helmets, giving the replica a level of construction and detail that sets it apart from standard decorative models. The result is a premium collectible that closely captures the proportions, appearance, graphics, and overall character of the helmet Bearman wears on track. Premium Collectible Construction Bell constructs this mini helmet using fiber-reinforced plastic, fabric, foam, and detailed hardware to create a realistic representation of the full-size racing helmet. 77% fiber-reinforced plastic 15% cotton fabric and foam 8% hardware Detailed visor and helmet hardware Realistic interior padding Authentic Bell Racing helmet proportions High-quality graphics replicating Bearman's 2026 helmet design Perfect for Display At half scale, the Bell Oliver Bearman Mini Helmet is large enough to showcase the helmet's intricate details while remaining compact enough for a desk, bookshelf, display cabinet, office, race room, or motorsport collection. Its detailed construction makes it an excellent centerpiece alongside die-cast Formula 1 cars, autographed memorabilia, team apparel, race-used collectibles, and other F1 mini helmets. Collector's Display Packaging The helmet is supplied in presentation packaging designed to protect the collectible during storage and display. The packaging also makes the Bell Oliver Bearman 2026 Mini Helmet an excellent gift for Formula 1 fans, Haas supporters, Bell helmet collectors, and Oliver Bearman fans. Bell Oliver Bearman 2026 Mini Helmet Features Official-style Oliver Bearman 2026 Formula 1 helmet design Haas F1 Team 2026 season collectible 1:2 scale Bell HP77 helmet replica Signature Oliver Bearman bear graphic Vibrant blue, yellow, and white design Detailed visor and helmet hardware Realistic interior construction Premium Bell Racing craftsmanship Compact size ideal for home or office display Collector's presentation packaging Excellent gift for Formula 1 and Haas fans Designed exclusively as a collectible display piece Bell Oliver Bearman Mini Helmet Dimensions Length: 6.49 in / 16.5 cm Width: 5.07 in / 12.9 cm Height: 5.19 in / 13.2 cm Packaging Specifications Box Length: 180 mm Box Width: 135 mm Box Height: 140 mm Gross Weight: 13 oz / 355 g including packaging Manufacturer Information Manufacturer: Bell Racing Helmets Model: Oliver Bearman Haas 2026 F1 Mini Helmet Scale: 1:2 Full-Size Helmet Inspiration: Bell HP77 Manufacturer Part Number: 4100564 For Display and Collecting Only This Bell 1:2 Scale F1 Mini Helmet is a collectible display item only. It is not a protective helmet and must not be worn or used for motorsport, karting, cycling, or any other activity requiring head protection. Bell Oliver Bearman 2026 F1 Mini Helmet FAQs Q: Is this Oliver Bearman's 2026 Formula 1 helmet?A: This is a 1:2 scale collectible replica based on Oliver Bearman's 2026 helmet design with Haas F1 Team. Q: What full-size helmet is the mini helmet based on?A: The collectible is modeled after the Bell HP77 helmet used by Oliver Bearman in Formula 1 competition. Q: What scale is this mini helmet?A: It is a 1:2 scale replica, approximately half the size of the full racing helmet. Q: Is this an actual wearable racing helmet?A: No. This mini helmet is designed strictly for display and collecting and does not provide protective functionality. Q: What makes the 2026 Oliver Bearman design distinctive?A: The 2026 design features a vibrant blue, yellow, and white color scheme along with Bearman's signature bear graphic. Q: Is the interior detailed?A: Yes. Bell mini helmets incorporate realistic interior padding, visor hardware, and construction details to closely resemble the full-size helmet. Q: What are the dimensions?A: The helmet measures approximately 6.49 inches long, 5.07 inches wide, and 5.19 inches high. Q: Does it come with collector's packaging?A: Yes. The helmet is supplied in presentation packaging suitable for storage, display, or gifting. Q: What is the Bell part number?A: The manufacturer part number is 4100564. A Must-Have Oliver Bearman and Haas F1 Collectible The Bell 1:2 Scale Oliver Bearman Haas 2026 F1 Mini Helmet brings one of the most recognizable pieces of a Formula 1 driver's equipment into a premium collectible format. With authentic Bell styling, detailed HP77-inspired construction, Bearman's distinctive 2026 graphics, and a display-friendly half-scale size, it is an outstanding addition to any Formula 1, Haas, Bell Racing, or Oliver Bearman collection.

Arai GPV-R Helmet Cheek Pads Fine-Tune the Fit of Your Arai GPV-R Your helmet can be the right size and still need a little fine-tuning. Arai GPV-R Cheek Pads let you customize the fit around your cheeks and jaw for a more secure, comfortable feel behind the wheel. Whether you're replacing worn-out padding or dialing in the fit of a new GPV-R, multiple thickness options make it easy to add a little room—or snug things up for a more precise fit. Choose Your Cheek Pad Thickness Thinner cheek pads provide more room inside the helmet, while thicker cheek pads create a snugger fit. This allows you to adjust cheek pressure without changing the helmet's primary shell or crown fit. 12mm: Thinner option for significantly more cheek room 15mm: Thinner option for additional cheek room 20mm: Standard cheek pad thickness for size Large 25mm: Standard cheek pad thickness for sizes XS, Small, Medium, and XL 30mm: Thicker option for a snugger cheek fit 35mm: Extra-thick option for increased cheek support 40mm: Thickest option for the snuggest available cheek fit Refresh an Older Helmet Cheek pads naturally compress with use. If your GPV-R doesn't feel as secure as it once did, a fresh set of cheek pads can restore much of that snug, supportive feel without replacing the entire helmet. Arai GPV-R Cheek Pad Details Fits Arai GPV-R helmets Sold as a replacement cheek pad set Available in multiple thicknesses for personalized fit Ideal for replacing worn or compressed cheek pads Allows cheek and jaw fit to be adjusted independently of helmet size Fit Tip: If your current cheek pads feel too tight, choose a thinner set. If the helmet feels loose around your cheeks or jaw, choose a thicker set.

Arai GPV-R Replacement Shields for GPV-R and SKV-R Helmets Refresh your visibility and customize your helmet with a genuine Arai GPV-R Helmet Shield. Designed for both Arai GPV-R auto racing helmets and Arai SKV-R karting helmets, these replacement shields provide the correct fit and operation for your Arai helmet. Choose from a wide selection of standard, tinted, dual-pane, and mirrored shield options to match your driving conditions and preferred look. Available Arai GPV-R Shield Colors and Options Clear – Maximum light transmission for low-light, overcast, nighttime, and general racing conditions. Semi-Tint – Reduces glare while allowing more light through than a dark tint. Dark Tint – Designed for bright daytime conditions where reduced light and glare are preferred. Dual-Pane Clear – Clear dual-pane configuration designed for improved performance in conditions where fogging may be a concern. Dual-Pane Semi-Tint – Combines a tinted appearance with a dual-pane shield configuration. Dual-Pane Dark Tint – Dark-tinted dual-pane option for bright conditions. Mirror Medium Tint Gold – Medium-tint shield with a gold mirrored finish. Mirror Medium Tint Silver – Medium-tint shield with a silver mirrored finish. Mirror Medium Tint Blue – Medium-tint shield with a blue mirrored finish. Mirror Medium Tint Green – Medium-tint shield with a green mirrored finish. Mirror Medium Tint Red – Medium-tint shield with a red mirrored finish. Arai GPV-R Helmet Shield Features Fits Arai GPV-R auto racing helmets Fits Arai SKV-R karting helmets Multiple clear, tinted, dual-pane, and mirrored options available Direct replacement for scratched, damaged, or worn shields Excellent spare shield for race weekends and track days Genuine Arai replacement component Designed for proper fit and operation with compatible Arai helmets Choose the Right Shield for Track Conditions Different lighting conditions can dramatically affect visibility behind the wheel. A clear shield is an excellent choice for low-light conditions and night racing, while Semi-Tint and Dark Tint options can help reduce glare during daytime sessions. For racers who want a more distinctive appearance, Arai's mirrored GPV-R shields are available in several finishes, including Gold, Silver, Blue, Green, and Red. Keeping multiple shields in your gear bag allows you to change your setup as sunlight, weather, and track conditions change throughout the day. Important Installation and Care Information Do not remove the latch from the shield. The latch is part of the shield assembly and should remain installed for proper fit and operation. Install the shield according to Arai instructions and verify that it opens, closes, and latches securely before using the helmet. For mirrored shields, Arai recommends cleaning the shield only with warm water and a microfiber towel. Frequently Asked Questions What helmets do Arai GPV-R shields fit?Arai GPV-R shields fit both Arai GPV-R auto racing helmets and Arai SKV-R karting helmets. What shield colors are available?Available options include Clear, Semi-Tint, Dark Tint, dual-pane versions, and mirrored finishes including Gold, Silver, Blue, Green, and Red. Can I remove the latch from the shield?No. Do not remove the latch from the shield. It should remain installed for proper shield operation and fitment. Which shield is best for night racing?Clear is generally the preferred choice when maximum light transmission is needed, including nighttime and low-light conditions. Which shield is best for bright daytime conditions?Dark Tint and the medium-tint mirrored options are intended for brighter conditions where reducing incoming light and glare is desirable. How should I clean a mirrored Arai GPV-R shield?Arai specifies cleaning mirrored GPV-R shields with warm water and a microfiber towel. Should I carry more than one shield?Yes. Keeping multiple shield options in your race bag makes it easier to adapt to changing sunlight, weather, and track conditions.

OMP ONE-S AIR Racing Suit  The OMP ONE-S AIR Racing Suit is engineered for professional drivers and race teams seeking maximum lightness, enhanced airflow, and unrestricted movement without compromising FIA-certified protection. Featuring advanced OMP Air technology and a minimalist construction optimized for customization, the ONE-S AIR is built for demanding motorsport environments where comfort and concentration matter most. Ultralight Performance With Enhanced Breathability Designed using an advanced lightweight fabric construction, the ONE-S AIR is 18% lighter and 10% more breathable than the previous generation ONE-S suit. The highly ventilated structure helps reduce heat buildup inside the cockpit while maintaining excellent comfort during long race sessions.   OMP One-S Air Racing Suit Features Dual homologated racing suit (SFI and FIA) OMP Air technology improves airflow and driver cooling 18% lighter than the previous ONE-S generation 10% more breathable for improved thermal management Minimal cut construction designed for easy team customization Pre-shaped sleeves improve natural driving position comfort Elastic stretch inserts enhance flexibility and mobility Stretch panels located in the back, crotch, and armholes Ultra-flat seams reduce pressure points and irritation Soft-touch inner lining improves overall comfort Refined stitching details with differentiated thread patterns Premium metal zipper for durability and smooth operation Low-profile cuffs reduce bulk inside gloves and shoes Shaped collar with OMP branded Velcro closure Engineered For Driver Comfort And Team Customization The simplified panel layout was specifically developed to maximize available space for sponsor logos, embroidery, and custom team graphics. Combined with ergonomic shaping and lightweight materials, the ONE-S AIR allows drivers to maintain focus by reducing fatigue and improving mobility throughout every session. Ideal For Professional Motorsport Applications The OMP ONE-S AIR is suitable for a wide range of competitive racing disciplines including GT racing, endurance racing, formula racing, touring cars, and professional track competition where lightweight protection and breathability are critical. OMP One-S Air Driver Race Suit Size Chart OMP One-S Air Racing Suit FAQs What certification does the OMP ONE-S AIR Racing Suit carry? The suit is FIA 8856-2018 homologated and can also be produced with SFI certification upon request. How much lighter is the ONE-S AIR compared to the previous ONE-S suit? The ONE-S AIR is approximately 18% lighter than the previous generation while also improving airflow and comfort. What makes the ONE-S AIR more breathable? OMP Air technology and advanced lightweight fabric construction increase airflow and reduce heat retention inside the suit. Is the ONE-S AIR suitable for custom team branding? Yes. The suit features a simplified cut and panel design optimized for sponsor logos, embroidery, and custom graphics. Does the suit include stretch panels? Yes. Stretch inserts in the back, crotch, and armholes improve flexibility and freedom of movement while driving. What type of closure system does the suit use? The ONE-S AIR uses a premium metal zipper along with a shaped collar featuring an OMP branded Velcro closure. Upgrade your racewear with the OMP ONE-S AIR Racing Suit and experience ultralight comfort, advanced airflow management, and SFI/FIA-certified protection trusted by professional drivers worldwide. Contact Discovery Parts today for sizing, availability, and custom team options.

Alpinestars GP Pro Comp Complete Driver Gear Bundle – Suit, Gloves & Shoes The Alpinestars GP Pro Comp Complete Driver Gear Bundle combines three premium pieces of Alpinestars racing equipment into one complete driver setup: Alpinestars GP Pro Comp Race Suit – Boot Cuff Leg Alpinestars Tech-1 ZX v3 Nomex Racing Gloves Alpinestars Tech-1 Z v2 Racing Shoes This bundle is designed for racers who want a coordinated Alpinestars setup without having to purchase each piece separately. Suit, glove, and shoe sizes can be selected individually so each part of the package can be properly fitted to the driver. Alpinestars GP Pro Comp Race Suit – Boot Cuff Leg The GP Pro Comp Race Suit provides lightweight fire-resistant protection with a driver-focused construction designed for comfort and mobility inside the cockpit. Its three-layer aramid construction is combined with strategically positioned stretch panels to reduce restriction while driving. The fully floating arm design helps improve shoulder and arm movement, while the pre-shaped construction is designed around the seated racing position. The boot cuff leg extends over the top of the racing shoe for the clean professional appearance commonly seen in high-level motorsport. GP Pro Comp Suit Features: FIA 8856-2000 homologated SFI 3.2A/5 certified Lightweight three-layer construction 100% aramid outer shell Boot cuff leg design Knitted stretch panels Fully floating arm construction Pre-shaped racing fit Tall ribbed collar Adjustable waist belt Double-slider YKK front zipper Integrated thigh pockets Alpinestars Tech-1 ZX v3 Nomex Racing Gloves The Tech-1 ZX v3 is a premium Alpinestars racing glove engineered for high levels of protection while maintaining excellent steering-wheel feedback. Its dual-layer honeycomb aramid construction provides fire-resistant protection without creating unnecessary bulk. External seams help reduce pressure points inside the glove, while the pre-curved fingers follow the natural position of the hand around the steering wheel. A 3D silicone grip pattern on the palm and fingers provides secure steering-wheel contact while maintaining excellent feel and flexibility. Tech-1 ZX v3 Glove Features: FIA 8856-2018 homologated Dual-layer honeycomb aramid construction External seams Pre-curved fingers and palm 3D silicone palm and finger grip Lightweight and breathable construction Excellent steering-wheel sensitivity Touchscreen-compatible thumb and index finger Alpinestars Tech-1 Z v2 Racing Shoes The Tech-1 Z v2 Racing Shoe is designed around lightweight construction, secure foot support, and precise pedal feel. Its close-fitting sock-style construction wraps around the foot and ankle while helping reduce unnecessary bulk. The Alpinestars speed-lacing system provides a secure fit, while the thin racing outsole helps maximize feedback through the throttle, brake, and clutch pedals. Perforated sections help improve airflow during long track sessions. Tech-1 Z v2 Shoe Features: SFI 3.3/5 homologated Premium bovine leather upper Sock-style ankle construction Aramid speed-lacing system Lace Lock System Para-aramid tubular lining Lightweight heel and footbed padding Perforated construction for ventilation Thin racing rubber outsole Excellent pedal sensitivity Integrated toe and heel reinforcement Complete Alpinestars Driver Setup This package creates a complete Alpinestars driver gear combination from the pedals to the steering wheel. The GP Pro Comp suit provides the primary layer of protection, the Tech-1 ZX v3 gloves provide secure steering-wheel grip and feedback, and the Tech-1 Z v2 shoes provide the sensitivity needed for precise pedal control. Because each item is sized independently, drivers do not have to compromise by purchasing a bundle with predetermined matching sizes. Bundle Certifications GP Pro Comp Suit: FIA 8856-2000 / SFI 3.2A/5 Tech-1 ZX v3 Gloves: FIA 8856-2018 Tech-1 Z v2 Shoes: SFI 3.3/5 Certification requirements can vary by racing organization and class. Always verify your sanctioning body's current requirements before competition. Questions About the Alpinestars Driver Gear Bundle Can I choose different sizes for the suit, gloves, and shoes?Yes. The suit, gloves, and shoes can each be sized individually so you can build the proper fit for your complete racing setup. Does the bundle include all three products?Yes. The bundle includes one GP Pro Comp boot cuff race suit, one pair of Tech-1 ZX v3 Nomex racing gloves, and one pair of Tech-1 Z v2 racing shoes. What does boot cuff leg mean?The boot cuff design allows the lower portion of the suit leg to extend over the top of the racing shoe rather than ending with a traditional elastic ankle cuff. Are all three pieces certified to the same standard?No. Each product carries its own certification based on the type of racing equipment. Always check your racing organization's requirements. Are the Tech-1 ZX v3 gloves designed for a close fit?Yes. They use a pre-curved, close-fitting racing design intended to minimize excess material and maintain steering-wheel feel. Are the Tech-1 Z v2 shoes designed for pedal feel?Yes. Their lightweight construction and thin racing sole are specifically designed to improve sensitivity and feedback through the pedals.

Arai PED Kit Maximize Your Helmet’s Aerodynamic Performance Strap in, because the Arai PED (Performance Enhancing Device) Kit is about to change the way you feel the wind at high speeds. Designed specifically for the Arai GP-6 series helmets (GP-6RC, GP-6, GP-6S), this kit transforms your helmet into an aerodynamic machine that glides through the air like a jet on race day. It’s not just about looking cool—though, let’s face it, you will—it’s about improving your stability and reducing that pesky helmet lift and buffeting. Feel like you're getting a bit of a head-bobble when you're pushing high speeds in your open-cockpit beast? The Arai PED Kit is here to keep your helmet (and you) in check. This kit includes a front chin spoiler to add downforce and a rear spoiler to eliminate lift. Whether you’re slicing through the air on a straightaway or taking a tight corner, the Arai PED Kit gives you the aerodynamic edge you didn’t even know you needed. Arai PED Kit Features Aerodynamic Spoilers: Includes one front chin spoiler and one rear spoiler for superior high-speed stability. Custom Fit for Arai GP-6 Series: Compatible with GP-6RC, GP-6, GP-6S, and even the GP-5W and SK-6 karting helmets. Modular Use: Use the front and rear spoilers independently or together—choose the level of aerodynamic wizardry that suits your needs. Transparent Design: Clear plastic keeps your helmet’s paint job front and center, or you can paint it to match for a seamless look. Easy Installation: Pre-applied double-sided tape makes installation a breeze. Just peel, stick, and hit the track. Arai PED Kit Product Specifications Manufacturer: Arai Helmets Manufacturer part no.: 10-2064 Material: clear plastic (paintable) Included in kit: one front chin spoiler, one rear spoiler Fits these Arai helmets: GP-6RC GP-6 GP-6S GP-5W SK-6 Installation: pre-applied high strength double-sided tape Frequently Asked Questions (FAQs): Will this fit my Arai helmet? Answer: If you’re rocking an Arai GP-6RC, GP-6, GP-6S, GP-5W, or SK-6 helmet, the PED Kit is your aerodynamic best friend. For other models, it may not fit quite right, so be sure to check compatibility. Do I need both the front and rear spoilers? Answer: Not necessarily! You can use either spoiler independently depending on what kind of aerodynamic stability you’re looking for. Want downforce on the front? Just use the chin spoiler. Need to fight helmet lift? The rear spoiler has your back (or head, really). How easy is the installation? Answer: It’s as easy as peeling off the backing of double-sided tape and sticking the spoilers to your helmet. No tools, no fuss, just a fast mod that makes a big difference on track days. Will it affect my helmet’s paint job? Answer: Not at all! The spoilers are clear to let your custom paint shine through, but you can also paint them if you’re looking to blend them into your helmet’s design. Why You Need This Kit: Spoil Yourself (and Your Helmet) Imagine this: You’re screaming down the straightaway, engine roaring, but your helmet stays locked in place with pinpoint stability. The buffeting? Gone. The lift? A thing of the past. All thanks to your new Arai PED Kit. You’re not just racing; you’re gliding through the air with precision. Why settle for standard when you can enhance your performance and experience pure aerodynamic bliss? Ready to boost your helmet’s performance? Click “Add to Cart” now and get the edge on your next track day!