Best selling products

A2-282 Girodisc BMW G8X M2, M3, M4 370mm Rear Rotors Give your BMW G87 M2, G80 M3, or G82 M4 the braking power it deserves with the Girodisc A2-282 2-piece rear rotors. These 370mm rotors are a direct replacement for the OEM rear iron rotors and are designed to improve heat dissipation, reduce unsprung weight, and deliver consistent performance under aggressive driving conditions. Track-Tested 2-Piece Rear Rotors for Your G8X FITMENT: BMW G87 M2, G80 M3, G82 M4 with 370mm rear iron rotors The Girodisc A2-282 rotors feature a lightweight aluminum hat bolted to a high-carbon cast iron rotor ring using a floating mount system. This setup allows for superior thermal expansion, reduced risk of cracking, and quick recovery from high temperatures—ideal for both spirited street driving and track use. The slotted face and 72 curved internal vanes pull cool air through the rotor, improving pad bite and minimizing brake fade. These rotors are fully compatible with factory calipers and pad shapes, so installation is easy—no modifications or special hardware required. When the rings eventually wear down, simply install D2-282 replacement rings and reuse the hats to minimize long-term maintenance costs. Sold and priced per pair. A2-282 Rear Rotor Features: Direct replacement for OEM 370mm rear rotors Fully compatible with factory calipers and brake pads 2-piece floating design reduces unsprung weight High-carbon alloy rotor rings with curved vane cooling Lightweight anodized 6061-T6 aluminum rotor hats Reusable hats pair with D2-282 replacement rings Made in the USA from high-quality domestic materials A2-282 Rear Rotor FAQs: Do I need new calipers or pads? No, the A2-282 rotors are designed to bolt right up using your factory hardware and brake pads. Can I use these on the street? Yes, they’re quiet and smooth enough for daily driving while offering the cooling and durability needed for track use. How do these compare to OEM rotors? They offer improved cooling, reduced weight, and replaceable rings for longer service life. When should I replace the rings? Replace them when they reach the minimum thickness or show signs of cracking. Use D2-282 replacement rings with the original hats. Whether you’re lapping your G8X on the weekend or just want race-grade stopping power on the road, the Girodisc A2-282 rear rotors offer the perfect balance of performance, longevity, and precision engineering.

D1-327 Girodisc Hyundai N 360mm Front Replacement Rings Keep your Hyundai Elantra N or Veloster N braking at its best with the Girodisc D1-327 front replacement rotor rings. Designed for use with the Girodisc A1-327 2-piece front rotor kit, these 360mm high-carbon steel rings restore performance without the cost of replacing your entire rotor assembly. Track-Ready Replacement Rings for Hyundai N Models FITMENT: Hyundai Elantra N, Veloster N with Girodisc A1-327 360mm front rotors When your Girodisc front rotors start to show wear, these D1-327 rings are the perfect refresh. Built from Girodisc’s proprietary high-carbon cast iron, they resist cracking and warping under extreme heat. The 72 curved vane internal design pumps cooling air through the disc, keeping temperatures in check during track sessions or spirited backroad drives. The slotted face improves pad bite and helps clear debris, making sure your brakes remain responsive and fade-free. These rings are precision-drilled and ready to mount to your existing Girodisc 6061-T6 aluminum rotor hats and floating hardware—no modifications needed. Sold and priced per pair. D1-327 Replacement Rotor Ring Features: Direct replacement for Girodisc A1-327 front 2-piece rotors 360mm diameter with high-carbon cast iron construction 72 curved internal vanes for optimized cooling airflow Slotted face for pad consistency and brake response Pairs with original Girodisc hats and floating hardware Manufactured in the USA with premium domestic materials D1-327 Rotor Ring FAQs: Will these fit OEM rotors or other brands? No, they’re made specifically for use with Girodisc A1-327 2-piece rotor systems. Do they include hats or mounting hardware? No, this is for the rotor rings only. Reuse your Girodisc aluminum hats and hardware. Are these good for daily driving? Yes, they offer quiet, smooth street performance and the durability to withstand aggressive driving. When should I replace the rotor rings? Replace them when worn to minimum thickness or when cracks extend to the outer edge. Inspect regularly if tracking your car. If you already run Girodisc front rotors on your Hyundai N and want to keep braking sharp without the cost of full replacement, the D1-327 replacement rings are the ideal solution.

A1-327 Girodisc Hyundai N 360mm Front Rotors Upgrade your Hyundai Elantra N or Veloster N with the Girodisc A1-327 2-piece front rotors. Designed to replace the factory 360mm front rotors, this lightweight and high-performance setup delivers improved braking response, lower unsprung weight, and superior heat management for spirited street driving or full-on track duty. Direct-Fit 2-Piece Rotors for Hyundai Elantra N & Veloster N FITMENT: Hyundai Elantra N, Veloster N with 360mm front rotors The A1-327 Girodisc rotors feature a two-piece design consisting of a lightweight 6061-T6 aluminum hat and a high-carbon cast iron rotor ring. The rotor rings use a slotted face and 72 curved internal vanes to maximize airflow and cooling, giving you consistent performance under hard braking. These rotors bolt directly to your vehicle with no modifications, and they work perfectly with factory calipers and brake pads. The floating design allows the rotors to expand and contract with heat, reducing the risk of warping or cracking and maintaining excellent pedal feel under repeated heavy use. When the rotor rings eventually wear out, simply reuse the aluminum hats and install D1-327 replacement rings to save on long-term maintenance. Sold and priced per pair. A1-327 Front Rotor Features: Direct bolt-on upgrade for OEM 360mm front rotors 2-piece floating construction improves thermal performance High-carbon alloy cast iron rotor rings with slotted face 72 curved vane design for optimized cooling efficiency 6061-T6 anodized aluminum hats reduce unsprung weight Replaceable rings (D1-327) minimize long-term rotor costs Made in the USA using premium domestic materials A1-327 Rotor FAQs: Do these work with stock calipers and pads? Yes, the A1-327 rotors are fully compatible with OEM Hyundai N calipers and pad shapes. Are these suitable for both street and track? Absolutely. They are engineered for quiet and smooth street driving, with the thermal capacity needed for high-performance track use. Do I need any additional parts for installation? No, these rotors are a direct replacement and reuse your factory hardware. When should I replace the rotor rings? Replace them when they reach minimum thickness or show edge cracks. Use D1-327 replacement rings to restore full function without replacing the hats. Whether you're chasing lap times or just want confidence-inspiring braking on your favorite backroad, the Girodisc A1-327 front rotors are the ultimate performance upgrade for your Hyundai N.

Competition Motorsport Titanium Wheel Lug Bolts for Lamborghini Priced and sold in sets of ten wheel lug bolts.  Enough for one axle of your Lamborghini Urus. These Wheel Lug Bolts Fit The Following Cars: Lamborghini Urus Lamborghini Urus S Lamborghini Urus Performante    Premium, Strongest Lug Bolts for Modern Lamborghini These titanium lug bolts from Competition Motorsport are meticulously designed and manufactured for your Lamborghini. Each bolt is crafted from aerospace-grade Ti-6Al-4V titanium alloy, ensuring superior strength and an exceptionally lightweight profile (half the weight of high-strength steel). Competition Motorsport Titanium Lug Bolts feature rolled threads, not cut, providing maximum strength, precision, and durability. Custom Bolt Lengths Available for Wheel Spacers Competition Motorsport Titanium Lug Bolts are available in both OEM lengths and longer lengths for those using wheel spacers. Specifications: Material: Grade 5 Ti-6AL-4V Titanium Alloy Yield Strength: 128,000 psi Ultimate Tensile Strength: 138,000 psi Shear Strength: 79,800 psi Density: 0.160 lb/in³ Attributes: Extremely high resistance to corrosion and low heat conductivity. Note: This listing is for one set of 10 lug bolts. Two sets are required for a complete car

Competition Motorsport Titanium Wheel Lug Bolts for Ferrari Priced and sold in sets of ten wheel lug bolts.  Enough for one axle. These Wheel Lug Bolts Fit The Following Cars:   Ferrari 812 Superfast/GTS (2018+) Ferrari 458 (2010-2015) Ferrari F8 (2019-2023) Ferrari Roma (2020+) Ferrari 488 (2016-2019) Ferrari FF (2012-2016) Ferrari California (2008-2017) Ferrari F12 (2012-2017) Ferrari GTC4 Lusso (2016-2020) The Best, Strongest Lug Bolts For Modern Ferraris This titanium lug bolt set from Competition Motorsport is designed and manufactured specifically for your Ferrari. Each bolt is machined from aerospace-grade Ti-6Al-4V titanium alloy for superior strength and extraordinarily light weight (half the weight of high-strength steel). Competition Motorsport Titanium Lug Bolts feature rolled threads -- never cut -- for maximum strength, precision, and durability. Custom Bolt Lengths Available For Wheel Spacers Competition Motorsport Titanium Lug Bolts come in both OEM length and longer lengths if you are using wheel spacers Specifications of Competition Motorsport Titanium Lug Bolts Grade 5 Ti-6AL-4V Titanium Alloy Yield Strength: 128,000 psi Ultimate Tensile Strength: 138,000 psi Shear Strength: 79,800 psi Density: 0.160 lb/in3 Extremely high resistance to corrosion and low heat conductivity. NOTE This is one set of 10 lug bolts. Two sets are required for one complete car.

Anodized Aluminum Front Camber Shims for Porsche 992 GT3 or Cup Car Porsche GT3 or Cup Car Front Shims Precision laser-cut from 6061-T6 aluminum and anodized for durability, these shims are used to adjust camber by changing length of your Porsche OEM or similarly configured lower control arm (such as RSS units). Thickness in millimeters is silk screened on each shim for easy sorting. One degree of negative camber is approximately a 5mm shim. Competition Motorsport Shims Available in the Following Sizes: 1 mm 3 mm 5 mm Package Savings: Enthusiast (two of each shim) save 10% Racer (four of each shim) save 15% Team (eight of each shim) save 20% These fit all two-piece Porsche lower control arms for 992 GT3/GT3RS front. Shims are priced individually (other than packages). They are typically used in pairs or in multiple-shim combinations.  This version of the Competition Motorsport Performance shims are used on 992 FRONT with two-piece lower control arms (commonly referred to as "GT3" control arms).

Anodized Aluminum Porsche GT3 Rear Control Arm Shims Porsche GT3 991 or 992 Similar Two-Piece Rear Lower Control Arms Save 60% vs oem shims! Precision laser-cut from 6061-T6 aluminum and anodized for durability, these shims are used to adjust camber by changing length of your Porsche OEM or similarly configured lower control arm (such as RSS units). Thickness in millimeters is silk screened on each shim for easy sorting. One degree of negative camber is approximately 5mm shim. Competition Motorsport Shims Available in the Following Sizes: 1 mm 3 mm 5 mm Package Savings: Enthusiast (two of each shim) save 10% Racer (four of each shim) save 15% Team (eight of each shim) save 20% These fit all two-piece Porsche lower control arms for 991 or 992 GT3/GT3RS rear. Shims are priced individually (other than packages). They are typically used in pairs or in multiple-shim combinations.  This version of the Competition Motorsport Performance shims are used on 991 and 992 REAR fitted with two-piece lower control arms (commonly referred to as "GT3" control arms).

CMS Performance Ultimate Race Seat Mounting Kit This Kit Fits the Following Vehicles: BMW F87 M2 (2016-2020) BMW G22 2-SERIES (2014-2020) Introducing Our Complete Race Seat Mounting Kit: The Ultimate Upgrade for Motorsports Enthusiasts! Are you a racing or track-day aficionado looking to upgrade your on-track safety and performance? Look no further than the CMS Performance Ultimate Racing Seat Mounting Kit. One of the very best upgrades you can make for driving your BMW on the race track is adding a dedicated racing seat. CMS Performance designed this kit to give you a complete solution to installing your choice of seat in your BMW. No mixing-and-matching, hunting for parts and wondering whether it'll all work together. The CMS Performance Ultimate Race Seat Mounting Kit has everything you need! Precision Engineering for BMW Excellence The CMS Performance Ultimate Race Seat Mounting Kit is precision- engineered, tailor-made to fit a variety of race seats safely and securely in your Porsche. Crafted with meticulous attention to detail from 3/16" carbon steel, this kit draws on our many years of experience with track-prepped Porsches. Let CMS Performance help you unlock the full potential of your high-performance BMW on the race track. Custom Powder Coat to Match Your BMW The CMS Performance Ultimate Race Seat Mounting Kit comes standard in a durable satin black finish powder coat. CMS Performance can also custom powder-coat your kit in just about any BMW OEM paint color you like. Simply choose "Custom Color" in the dropdown above and specify the BMW color you want in your Order Notes at check-out. See Assembly Instructions Here CMS Performance Ultimate Race Seat Mounting Kit Includes: Mounting base w/ integrated sub strap bar (bolts securely to factory BMW seat mounting holes) Two steel side-mount race seat brackets All necessary hardware (Grade 8) Detailed installation instructions Optional: high-performance race seat slider Key Features of This Kit: Race-Ready Compatibility: Designed to seamlessly integrate with a wide range of racing seats from Sparco, OMP, Racetech and Sabelt. Our mounting kit ensures a perfect fit on the driver and/or passenger side of your BMW. CMS Performance has you covered. Fully Integrated: The CMS Performance kit includes everything you need to install a racing seat in your BMW. No mixing-and-matching, so you can spend less time installing and more time racing. Lightweight Durability: Constructed from premium materials, our kit prioritizes strength without compromising on weight. The integrated design puts a premium on maintaining structural integrity. Customization Options: Tailor your installation to perfection with multiple options, including racing sliders and custom powder-coat colors. Enhanced Safety: Safety is paramount in motorsports, and our kit doesn't cut corners. It's designed to meet or exceed industry safety standards, keeping you protected during the most demanding races. Quick and Easy Installation: The CMS Performance Racing Seat Mounting Kit is engineered for straightforward installation and precise fitment. Not included: CMS Performance roll bar and race seats are available separately. Seat mounting kit is shown with optional Recaro seat slider.

Bell HP77 2024 Esteban Ocon 1:2 Mini Helmet Bell has teamed up with Formula 1 driver Esteban Ocon to create this 1:2 scale replica special edition Mini Helmet featuring Esteban Ocon's helmet livery with BWT Alpine Racing for the 2024 F1 season. This meticulously-crafted replica, at a scale of 1:2, faithfully captures the essence of his original helmet. Esteban worked closely with Bell's paint team to ensure the graphics and signature elements are closely matched to his own F1 helmet. Show your support for Esteban Ocon with this new replica helmet from Bell! Note: this is a replica helmet for display purposes only and is not certified for any type of motorsport use.

AP Racing by Essex 2-piece Spline Drive Competition J Hook front disc pair for Porsche 911 (991) GT3 Cup: 380mm x 32mm (14.96" x 1.26") 72 Vane, D54 radial depth Innovative Spline Drive disc system derived from professional racing applications Designed for: club racing, time trial, autocross, HPDE Works with OE calipers, no modifications required Ultralight 2-piece fully-floating AP Racing J Hook disc with anodized billet aluminum hat

AP Racing by Essex 2-piece Spline Drive Competition J Hook rear disc pair for Porsche 911 (991) GT3 Cup: 380mm x 30mm (14.96" x 1.18") 72 Vane, D47 radial depth Innovative Spline Drive disc system derived from professional racing applications Designed for: club racing, time trial, autocross, HPDE Works with OE calipers, no modifications required Ultralight 2-piece fully-floating AP Racing J Hook disc with anodized billet aluminum hat

AP Racing by Essex 2-piece Spline Drive Competition J Hook front disc pair for Porsche 981 / 718 (982) Cayman GT4 Clubsport: 380mm x 32mm (14.96" x 1.26") 72 Vane, D54 radial depth Innovative Spline Drive disc system derived from professional racing applications Designed for: club racing, time trial, autocross, HPDE Works with OE calipers, no modifications required Ultralight 2-piece fully-floating AP Racing J Hook disc with anodized billet aluminum hat

AP Racing by Essex 2-piece Spline Drive Competition J Hook rear disc pair for Porsche 981 / 718 (982) Cayman GT4 Clubsport: 380mm x 30mm (14.96" x 1.18") 72 Vane, D47 radial depth Innovative Spline Drive disc system derived from professional racing applications Designed for: club racing, time trial, autocross, HPDE Works with OE calipers, no modifications required Ultralight 2-piece fully-floating AP Racing J Hook disc with anodized billet aluminum hat

Bell HP77 2024 Kevin Magnussen 1:2 Mini Helmet Bell teamed up with Formula 1 driver Kevin Magnussen to create this 1:2 scale replica special edition Mini Helmet featuring Kevin Magnussen and Haas livery for the 2024 Formula 1 season. This meticulously-crafted replica, at a scale of 1:2, faithfully captures the essence of Kevin's original helmet. In fact, Magnussen worked closely with Bell's paint team to ensure the graphics and signature elements are closely matched to his own F1 helmet. Show your support for Kevin Magnussen and Haas with this new replica helmet from Bell! Note: this is a replica helmet for display purposes only and is not certified for any type of motorsport use.

Sabelt GT-635 Carbon Fiber Racing Seat for Ferrari Challange Through the years, the Sabelt GT-635 racing seat design is known as the OEM fitment for Ferrari Challenge race cars. The latest Sabelt GT-635 racing seat was developed in partnership with the fastest teams in both Ferrari Challenge series and GT Championships. The result is a racing seat that's both light weight and incredibly comfortable. Offered in Medium, Large or XL to accommodate a wide range of drivers, the GT-635 is beautifully constructed and upholstered to offer excellent support and breathability. The GT-635 carbon seats flat bottom and specific back inclination design provides proper fitting suitable for either circuit and rally cars. The shell has undergone extensive studies and trials to be the most ergonomically optimal position for the driver. The DCT halo offers invaluable head protection. The double shoulder harness slots improve the fitting of different drivers torso heights. The carbon fiber shell is available in two sizes: M (small shell,) and L/XL (big shell.) The fire retardant anti-slip fabric with improved grip on specific key areas also features improved comfort thanks to 3D breathable mesh materials and high density foam. The GT-635 is available for use with FIA certified sliders (circuit only) or fixed brackets (GT/rally/circuit). Be sure to select the correct model from the drop down menu for your specific application. The sliders and brackets are sold separately. FIA 8862-2009 certified.

Recaro Speed V SEAT Superb Style and Amazing Performance! The RECARO Speed V seat is based on Recaro's popular Speed model, with unique design features and upholstery options to complement the styling of high-end sports cars and sports sedans. The seat was inspired by Recaro's world-renowned racing seat shells, with comfort and performance designed for the rigors of performance driving. When you sit in a RECARO Speed V seat, you can feel the difference that superior engineering and ergonomics can make. The entire seat is lined with thick, dense, high-quality foam that keeps you firmly in place and ensures long lasting support and comfort. After a long drive, your body feels relaxed and you feel refreshed. The RECARO Speed V is the perfect combination of comfortable sports seat and pure racing shell. The innovative lightweight shell boasts an exclusive slim design, plus outstanding lateral and shoulder support. The Recaro Speed V features highly fire-resistant leather upholstery1 with red, blue, cloud grey, or yellow suede accents. The bottom cushion of the Speed V can be had with sub-strap hole so the Recaro Speed V can accommodate a 5- or 6-point harness. Recaro Speed V Features and Attributes A high-value sports seat with high-end styling and high-tech features RECARO’s proprietary integrated lumbar support technology provides superior comfort and support Look and feel of a racing seat, with comfort for everyday driving Pronounced seat cushion and backrest bolsters provide firm lateral hold Shoulder, back and thigh bolsters designed to hold you in a correct seating position for high-performance driving Backrest easily adjustable with a manual dial for millimeter precision Integrated headrest and belt pass-through openings Optional sub-strap hole in Speed V cushion for 5- or 6-point harness Flame-retardant materials RECARO SPEED V SEAT SPECIFICATIONS Weight: Approximately 14.5 kg / 31.0 lbs. Max Height: 82.0 cm / 32.5 in. Materials: High-quality glass fiber-reinforced plastic. Dimensions: Check the product photos, because size does matter. Made in Germany: Precision engineering at its finest. 1 The Recaro Speed V is not FIA or SFI approved for use in competition.