Best selling products

Pagid Racing Brake Pad Shape No. 1903 Fits the Following Vehicles: Make Model Build (Year) Front Rear Ford Mustang (Saleen S281 Extreme) 2007 + X Mitsubishi Lancer Evo X R4 Tarmac Rally 2007 - 16 X Sin Cars R1 2015 + X X Sin Cars R1 RS 2015 + X X Sin Cars R1 GT4 2015 + X X Fits the Following Calipers: Make Type Remarks Shape No. Alcon TA6. CAR89, CAR11 [4489] D51 17mm,18mm,25mm 1538, 1903, 8018 AP Racing CP3894 D46 / D51 / D54 18mm 1852, 1903, 1904 Baer Brakes 6S 18mm 1903 Coleman Series IV 18mm 1903 StopTech ST60 18mm 1903 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSC 1 Compound (Ceramic Rotors Only) Race and track day compound for all known types of ceramic brake discs. RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Pagid Racing Brake Pad Shape No. 1896 Fits the Following Vehicles: Make Model Build (Year) Front Rear Ferrari 360 Challenge 1999 - 2005 X Skoda Fabia R5 2014 - 17 X Fits the Following Calipers: Make Type Remarks Shape No. Alcon TPC CAR26 [4426] 20mm,25mm,28mm 1618, 1619, 1896 AP Racing CP5788 D48 20mm 1896 Brembo 07.5169. [type 140 or B18 family] 16mm,17mm ,20mm,25mm,28mm 1616, 1618, 1619, 1896, 8030 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. RSL 19 Compound: Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications.

Pagid Racing Brake Pad Shape No. 1842 Fits the Following Vehicles: Make Model Build (Year) Front Rear Audi S8 99 - 02 X Porsche 928 5.4 GTS 32V 91 - 95 X Porsche 959 2.8 87 - 91 X X Porsche 964 3.3/3.6 Turbo & Turbo S 91 - 93 X Porsche 968 3.0 Coupe Turbo S 93 - 95 X Porsche 993 3.6 Turbo & Turbo GT2 95 - 97 X Porsche 993 3.8 Carrera RS & RSR 95 - 97 X Porsche 993 4S [turbo look] 96 - 97 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear.

Pagid Racing Brake Pad Shape No. 1674 Fits the Following Vehicles: Make Model Build (Year) Front Rear Aston Martin Vantage V8 GT4 ProDrive [race car] 6-piston front 2011 - 17 X Aston Martin Vantage V12 GT3 [race car] 2013 - 14 X Aston Martin Vantage V12 GT3 [race car] sprint 2015 - 17 X Audi R8 LMS Ultra GT3 [race car] 2012 - 15 X Audi R8 GT4 + GT4 Cup [race car] 2017 + X BMW M4 GT4 [F82] [race car] 2017 - 21 X BMW M6 GT3 [race car] 2016 + X BMW M6 GTLM [race car] 2016 - 17 X Chevrolet Corvette C7 GT3 [Callaway race car] 2015 + X Ferrari 355 Challenge 1995 - 2000 X X Ferrari 458 Italia GT3 [race car] 2013 - 16 X Ferrari 488 GT3 [race car] 2016 + X Ford Mustang Boss 302S 2013 + X KTM X-Bow GT4 2015 + X Lamborghini Gallardo GT3 [race car] 2014 - 15 X Lamborghini Gallardo LP 600 GT3 [race car] 2013 - 15 X Lamborghini Huracán GT3 [race car] 12015 + X Lamborghini Huracán Trofeo [race car] 2015 + X Lexus RC F GT3 2017 + X McLaren 650S GT3 [race car] AP caliper 2017 + X McLaren 720S GT3 [race car] Alcon calipers 2019 + X McLaren MP4-12C GT3 [race car] Akebono caliper 2013 - 15 X Mercedes AMG GT GT3 [race car] 2016 + X Mercedes AMG GT4 [race car] 2017 + X Mercedes SLS AMG GT3 [race car] 2013 - 15 X Porsche 991.2 GT3 R [race car] 2019 + X Porsche 991 RSR GTE [race car] 2017 + X Porsche 996 GT3 R & GT3 RS [race car] 2000 - 05 X Porsche 997 GT3 RSR 2007-12 X Porsche 997 GT3 R [race car. endurace caliper] 2007-12 X BMW M4 GT3 2021 + X Porsche 992 GT3 R [race car] 2022 + X BMW M4 GT4 [G82] [race car] 2022 + X Ferrari 296 GT3 [race car] 2022 + X Mercedes AMG GT2 2023 + X Fits the Following Calipers: Make Type Remarks Shape No. Alcon B type [4441] 16mm, 18mm, 20mm, 22mm, 25mm 1595, 1607, 1674, 8037, 8267 AP Racing CP6070 D49 25mm 1674 AP Racing CP6470 & CP6480 D49 25mm 1674 Brembo 07.5139. [type 132 or B13 family] 16mm, 20mm, 22mm, 25mm, 26.5mm, 29mm 1595, 1607, 1674, 2704, 8037, 8191 Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. Pagid Pre-Bedding Service Some Pagid racing brake pads are available pre-bedded and “ready to race”. Good preparation and adjustment of the car is the basic requirement for any successful race. Bedding the brake components requires good concentration, experience and a lot of training time. But time is often crucial and you need to save it for other purposes. Incorrectly bedded brakes reduce the controllability and the lifetime of the pads and discs. The maximum braking performance can only be achieved by correctly bedded brake parts. To save time and money, we offer pre-bedding brake pads via a computer controlled system. Using the right sensory input, we can precisely bed in your pads free from environmental influences like traffic, rain, and even driver training. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RSL 2 Compound: RSL 2 is a low metallic resin bonded material containing steel and aramid fibers with high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races on applications with high cooling efficiency. RSL 2 features excellent pad life and modulation, as well as friction stability at high temperatures. Applications include GT cars, touring cars and prototype endurance racing. Due to excellent modulation characteristics, RSL 2 is often also used in sprint races. RSL 19 Compound: Pagid RSL 19 is a low metallic resin bonded material containing steel and aramid fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristics. Rear axle usage in combination with RSL 1 or RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and touring cars. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. RS 44 Compound: The Pagid RS 44 (Orange) is a carbon-based, highly controllable pad with a progressive friction curve. It has a medium initial bite and good low temperature response. A very versatile pad for use on both front and rear axles, or in conjunction with RS14 on the front axle in FWD cars. Particularly popular in Porsche club racing, fitted as OEM on the Porsche 993 RS and GT2. Pagid RST 1 Compound Used in Rally tarmac, GT cars and touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors. RST 1 has a very high friction level and high temperature resistance. It is a semi-metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid RST 4 Compound: RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typically use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing (tarmac and gravel) and for front engine cars. Also used in NASCAR on long ovals.

Pagid Racing Brake Pad Shape No. 1587 Fits the Following Vehicles: Make Model Build (Year) Front Rear KTM X-Bow 2008 + X Mitsubishi Lancer Evo V - Evo IX 1998 - 2006 X Nissan 350Z Coupe Track 2002 - 08 X Subaru WRX STI 3rd & 4th Gen 2003 - 16 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RS 14 Compound: The Pagid RS 14 (Black) is a high friction value ceramic compound with very good modulation and high fade resistance. A very popular, aggressive pad with strong initial bite and high torque. In addition to the track-day environment, RS14 has shown success in short- to medium-distance circuit racing as well as gravel and tarmac rallying. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. RS 42 Compound: RS 42 is a low metallic resin bonded material containing steel and aramid fibers. The characteristics make this material appropriate for small formula cars. Pagid RS 42 is regarded as a classic rally racing brake pad compound, as well as being very popular in small formula and touring cars. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. Pagid RST 4 Compound: RST 4 is a semi-metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance. Typically use is in formula cars and open wheel racing. It is also very popular as a rear-axle material for rally racing (tarmac and gravel) and for front engine cars. Also used in NASCAR on long ovals.

Pagid Racing Brake Pad Shape No. 1427 Fits the Following Vehicles: Make Model Build (Year) Front Rear BMW 850 [E31] 1990 - 99 X Ferrari 456 GT 1994 - 96 X Ferrari 575M Maranello 2002 - 06 X Ferrari F512M & 550 X Maserati Spyder 4.2 & Coupe 3.2 2002 - 07 X Nissan 350Z Coupe, Track 2002 - 08 X Nissan Skyline GT-R 1989 - 95 X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability. RS 42 Compound: RS 42 is a low metallic resin bonded material containing steel and aramid fibers. The characteristics make this material appropriate for small formula cars. Pagid RS 42 is regarded as a classic rally racing brake pad compound, as well as being very popular in small formula and touring cars.

Pagid Racing Brake Pads No. 1408 Fits the Following Vehicles: Make Model Build (Year) Front Rear Aston Martin DB9 04 - 16 X Aston Martin Vanquish 03 - 08 X Aston Martin Vantage V8 GT4 ProDrive [race car] stock OE caliper 12 - X Cadillac CTS-V (4 piston front caliper) 03 - 09 X Cadillac CTS-V (6 piston front caliper) 10 - 14 X Chevrolet Camaro SS [Gen 5] 09 - 15 X Chevrolet Camaro ZL1 [Gen 5] 12 - 15 X Chevrolet Camaro ZL1 and ZL1 1LE [Gen 6] 16 - X Dodge Challenger HellCat & 392 15 - X Ferrari 360 all models 99 - 05 X X Ferrari F430 [cast iron brakes] 05 - 10 X X Pagid Racing Brake Pads are engineered for high-performance driving, delivering exceptional stopping power, durability, and control under the most demanding conditions. Trusted by professional racers and performance enthusiasts worldwide, these pads are crafted using advanced friction materials and cutting-edge technology to ensure consistent performance, low fade, and excellent modulation. Whether you're on the track or tackling aggressive street driving, Pagid Racing Brake Pads provide the reliability and confidence you need to push your vehicle to its limits. Pagid Racing Brake compounds are for steel (cast iron) rotors only unless otherwise noted. RSL 29 Compound: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1 Compound Used in GT cars, touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well. RSL 1 is a low metallic resin bonded material containing steel and aramid fibers with very high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its reduced wear rate and disc friendliness make this material appropriate for endurance races. Pagid RSC 1 Compound (Ceramic Rotors Only) A race and track day compound for all known types of ceramic brake discs, RSC 1 is a low metallic resin bonded material containing steel and aramid fibers. This material features good all-round characteristics and is suitable for all types of usage. Pagid RST 3 Compound: RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. Rally tarmac and gravel, GT cars, touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.

Bosch 82mm Throttle Body for Porsche Genuine Bosch 82mm throttle body made in Germany. Used as original equipment on the GT3 and some Porsche Turbos, this throttle body is also used with many IPD Competition Plenums to dramatically increase horsepower and torque in Porsches originally equipped with smaller throttle bodies and restrictive intake systems. Don't fall for cheap knock-offs; they're out there, but they'll give you nothing but trouble. Especially if you run your Porsche at the track where heat becomes a factor. Bosch is the OEM throttle body on all Porsches, including track animals like the GT3 and GT3RS, and can be relied upon to work flawlessly under any conditions.

COBB Tuning Accessport V3 for Porsche 718 (All Models) The COBB Accessport V3 is the most advanced and best-selling ECU tuning upgrade for the Porsche 718 Boxster and Cayman. Porsche’s factory ECU mapping is conservative by design, leaving untapped power and torque on the table. COBB’s OTS (off-the-shelf) performance maps unlock sharper throttle response, increased midrange torque, and greater top-end power across the full rev range. As you add bolt-on performance upgrades, the Accessport grows with your build—providing map support for most intakes, exhausts, intercoolers, and more. It’s the last tuning device your 718 will ever need. Installation takes about 20 minutes: download your preferred maps from COBB, connect the Accessport to your OBD2 port, flash the ECU, and you're ready to drive. Your factory tune is safely backed up so you can revert to stock anytime. The Accessport V3 features a large full-color high-resolution display, customizable multi-gauge layouts, and support for 100 calibrations. Choose from a wide range of mounts and bezel options to create your ideal cockpit setup. Warning: Installing an Accessport over non-OEM or non-COBB software may result in ECU/TCU failure. Confirmed Applications Boxster 2017–2021 Porsche 718 Boxster MT / PDK 2017–2021 Porsche 718 Boxster S MT / PDK 2018–2019 Porsche 718 Boxster GTS MT / PDK Cayman 2017–2021 Porsche 718 Cayman MT / PDK 2017–2021 Porsche 718 Cayman S MT / PDK 2018–2019 Porsche 718 Cayman GTS MT / PDK Features Large full-color high-resolution display Customizable multi-gauge monitoring layout In-vehicle mount with on/off switch User-customizable startup screen Interchangeable faceplates COBB Accessport V3 Dyno Graphs Key Benefits Unlocks significant horsepower and torque across the powerband Improves throttle response and drivability Supports OTS maps for popular bolt-on upgrades Customizable multi-gauge layouts for street, track, or dyno use Quick installation and easy map switching Stores up to 100 maps for flexible tuning High-resolution display with interchangeable faceplates Can revert to stock mapping anytime Competition Motorsport | sales@competitionmotorsport.com | (844) 438-7244

A1-159 Girodisc 2pc Front Brake Rotors for McLaren 570S/650S w/CCB FITMENT: McLaren 570S, Front McLaren 650S, Front This Girodisc system for the McLaren 650S or 570S is a direct replacement for the OEM McLaren carbon ceramic front rotors1. It is an upgrade to a two-piece steel rotor and aluminum hat combination. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. When used with the proper brake pads1 and high-temperature racing brake fluid, these Girodisc replacement rotors give you an excellent, race-proven solution to the fragile and expensive carbon-ceramic OEM rotors on your McLaren. The central hat section of each Girodisc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair. 1 Note: These Girodisc rotors have a different annulus (pad swept area) than the OEM carbon-ceramic rotors, in order to maintain their light weight. A brake pad with an annulus of 66mm or less must be used with these Girodisc rotors. We recommend the Pagid 8081 racing brake pads in either RS29 (endurance racing) or RS14 (sprint racing) compound.  If there's another specific pad and/or compound you're after please, contact us at 888 748 7223 and we'll get you what you need! Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

D2-043 Girodisc Rear Replacement Rotor Rings FITMENT (REAR): Ford GT is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. REPLACEMENT ROTOR RINGS ONLY. Need new rings for your Girodisc (or Brembo or Stoptech) two-piece rotors? We've got them. Replacement rings come complete with new hardware and full instructions for re-assembly. Or, if you like, you can send us the hats and we will do all the re-assembly for only the cost of shipping.  This service is available for the life of your rotors.Price is for a pair of rings and two hardware kits. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

D1-043 GiroDisc Replacement Rotors FITMENT (Front): Ford GT is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. Need new rings for your Girodisc (or Brembo or Stoptech) two-piece rotors? We've got them. Replacement rings come complete with new hardware and full instructions for re-assembly. Or, if you like, you can send us the hats and we will do all the re-assembly for only the cost of shipping.  This service is available for the life of your rotors.Price is for a pair of rings and two hardware kits. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

A2-043 Girodisc 2pc Rear Brake Rotors FITMENT (REAR): Ford GT is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. This Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination as a direct replacement for the OEM brake discs.  The Girodisc floating rotors will bolt directly to your Mustang and work flawlessly with OEM calipers.  By upgrading your brakes with these lightweight high-performance replacements, as opposed to a big brake kit, your factory bias is maintained as well as your ABS effectiveness and efficiency.  These 20-lb. Girodisc rotors are lighter than OEM pieces, resulting in a reduction in rotational and unsprung weight allowing for quicker acceleration, stronger braking, and faster suspension response. When used with Pagid or PFC performance brake pads, and RF-1 brake fluid, you have the best possible solution to overheating, cracking, and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum.  The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations.  The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.   The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling. Sold/priced per pair. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

A1-043 Girodisc 2pc Front Brake Rotors FITS: Ford GT (2005-2006) is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products the same or next business day to ensure we meet your delivery deadline. This Girodisc system upgrades the OEM brakes to a two-piece steel disc and aluminum hat. This two-piece "floating rotor" design will bolt directly to your Ford GT front and work flawlessly with the OEM calipers. Upgrading your brakes to lightweight, high-performance Girodisc rotors, you maintain the factory brake bias and ABS effectiveness. Much lighter than the OEM rotors, Girodisc rotors reduce rotational and unsprung mass giving you stronger braking and faster suspension response. Combined with Pagid or PFC performance brake pads and RF-1 racing brake fluid, Girodisc rotors are the ultimate solution to overheated, cracked, warped rotors that result from high-performance driving. The central hat of the rotor is made from 6061-T6 aircraft aluminum. The disc is manufactured in the USA from the same cast iron used by professional racing organizations. Its curved-vane design, developed in racing, acts like a centrifugal pump forcing cool air through the disc. The disc and hat mount together through a floating mount system using ten cadmium plated, high-strength alloy steel drive pins manufactured by Girodisc. These drive pins transfer braking load while maintaining axial and radial float between the disc and hat to allow for heat expansion. Anti-noise spring washers eliminate the noise typically associated with floating rotors. This two-piece Girodisc design allows for disc-only replacement, reusing the hat to minimize maintenance costs. Sold/priced per pair. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

A1-112 Girodisc 2pc Front Brake Rotors (Mustang FR500S) FITMENT: Ford Mustang FR500S, Front is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline. The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency. Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response. When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (available from ), you have an amazing solution to overheating, cracking and warping rotors. The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc. The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance. Sold/priced per pair. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

Sparco Racing Seats ADV Elite Carbon Seat The Sparco ADV Elite Carbon is an extremely strong, ultra-light weight carbon fiber seat designed to pass the FIA’s highest seat rating FIA 8862-2009. This means that the Sparco ADV Elite Carbon seat has been tested to an impact of approximately 70G. This rating is required for WRC racing, and the Sparco ADV Elite Carbon seat was specially designed with an upright driving position preferred by Rally drivers. In addition to the Rally driving position, the outer dimensions have been reduced to fit into typically smaller WRC cockpits. With strength at the top of its class, the Sparco ADV Elite carbon seat can withstand over 6,600 lbs. of lateral force. The Sparco ADV Elite carbon seat has an energy absorbing system in the areas subjected to the highest stress to protect the driver. The entire seat is covered in self-extinguishing fabric and special non-slip fabric in the shoulders and seat area. The Sparco ADV Elite carbon seat is FIA approved when mounted with the Sparco #004988ADV side-mount brackets. Sparco Racing Seats ADV Elite Carbon TECHNOLOGY Ultra-light weight Carbon Fiber construction FIA 8862-2009 approved Testing to an impact of 70G Designed for WRC Rally cockpits & driver position Hans device compatible Fire retardant fabric Special non-slip fabric Sparco Racing Seats ADV Elite Carbon DIMENSIONS