Best selling products

Stilo Anti-Fog/Anti-Scratch Short Visor for the ST5 Helmet Stilo ST5 short visors fit all Stilo SA2020, SA2015, FIA 8859/8860 non-ABP model helmets. Stilo visors are available in over 4 different colors in different levels of gradient to make sure you have the perfect shield for every race condition. From the Stilo dark smoke to a selection of multiple iridiums, Stilo ST5 visors are a great way to ensure your best vision and lap time. Stilo ST5 GT Visor Part Number Chart: YA0854 ST5 Mirror dark visor YA0836 ST5 Iridium blue dark visor YA0837.2 ST5 Iridium red dark visor YA0838 ST5 Iridium yellow dark visor - Not FIA Certified High quality, Anti-fog visors shaped for the Stilo ST5 GT helmets. The Stilo ST5 series is unique in that the shield lock is located in the center position of the shield. The shield lock is released by squeezing the outboard sides together and that will then release it from the mount stud that is located in the center of the helmet. The reason for this is to "clean-up" the sides of the helmet where a side impact in a head containment seat may grab parts of the helmet. All Stilo ST5 shilds have the center release mechanism installed on it.All Stilo ST5 shields are treated with an anti-fog treatment and they do require special care. The best result we have by far is the Stilo Visor cleaner. Liberally spray the outside of the visor with the cleaner, and wipe in a single swipe with a micro fiber towel until clean and dry. If fingerprints or dirt remain, repeat as needed. A back and forth wiping motion will tend to leave lint from the rag on the visor, so the single pass works best. Repeat if necessary, but usually one pass works great.Stilo Visor Care: Do not use Windex or any glass cleaner containing ammonia, as this can harm the anti-scratch coating on the outside of the visor, and the anti-fog coating on the inside of the visor. This is the official Stilo Visor Cleaner.

Alpinestars Tech-1 K Race v2 Vertical Karting Gloves The Alpinestars Tech-1 K Race v2 Vertical Karting Gloves combine lightweight construction, responsive steering-wheel grip, and a bold digital design for recreational and competitive kart racers. Polyester bonded with polymesh provides a flexible, breathable feel while helping the gloves withstand regular track use. Internal seams create a traditional close-fitting profile, while the synthetic suede palm offers durability and direct steering feedback. Ergonomically positioned silicone printing across the palm and fingers increases traction, helping drivers maintain confident control throughout practice sessions, qualifying runs, and races. Lightweight Performance for Warm Karting Conditions The Tech-1 K Race v2 Vertical uses a lightweight polyester-mesh construction designed to provide excellent feel and enhanced comfort in warm weather. The flexible upper follows the shape of the hand without adding unnecessary bulk between the driver and steering wheel. This breathable construction makes the glove especially useful for indoor karting, summer competition, and extended track sessions where heat and moisture can reduce comfort. Synthetic Suede Palm for Durability and Feel The palm is constructed from synthetic suede to balance wear resistance with steering sensitivity. It creates a durable contact surface without the heavy or padded sensation that can reduce feedback from the wheel. The close palm construction allows drivers to feel subtle changes in steering resistance and make precise corrections through technical corners. Ergonomic Silicone Palm Grip Strategically placed silicone printing across the palm and fingers improves traction against the steering wheel. This added grip helps limit unwanted hand movement during aggressive steering inputs, braking zones, and high-load corners. Because the silicone surface helps hold the wheel securely, drivers can maintain control without squeezing excessively tightly, which may help reduce fatigue over longer sessions. Mesh and Lycra Finger Fourchettes The finger construction combines mesh fourchettes on one half of the fingers with Lycra panels on the other half. This combination provides a balance of airflow, flexibility, and durability. The mesh sections encourage ventilation between the fingers, while the Lycra panels stretch naturally as the hand opens, closes, and moves around the steering wheel. Pre-Curved Finger and Palm Design The fingers and palm are shaped in a pre-curved driving position that follows the natural form of the hand while holding a kart steering wheel. This design helps reduce material bunching around the fingers and palm. A more natural driving shape supports consistent steering feel and reduces the resistance that can occur when a flat glove is forced into a gripping position. Internal-Seam Construction The Tech-1 K Race v2 Vertical uses internal seams for a traditional karting-glove fit. The lightweight materials, flexible fourchettes, and pre-curved shape work together to maintain comfort while keeping the glove close to the hand. Open Cuff with 180-Degree Elasticated Wrist Alpinestars’ open-cuff design makes the glove easy to put on and remove. A 180-degree elasticated wrist stretches during entry and then fits securely around the wrist to help prevent movement while driving. The streamlined gauntlet cuff also provides comfortable coverage between the glove and kart suit sleeve. Touchscreen-Compatible Fingertips Touch-compatible printing on the thumb and index finger allows drivers to operate many smartphones, lap timers, and touchscreen electronics without removing the gloves. This makes it easier to review lap data, adjust timing applications, or use a mobile device between sessions. Distinctive Vertical Graphic Design The Vertical edition features an aggressive digital print that gives the glove a recognizable appearance on the track. The graphic treatment complements the performance-focused construction without adding weight or restricting movement. Alpinestars Tech-1 K Race v2 Vertical Glove Features Lightweight polyester bonded with polymesh Breathable construction for warm-weather comfort Internal seams provide a traditional close fit Synthetic suede palm for durability and steering feel Ergonomic silicone printing on the palm and fingers Mesh and Lycra finger fourchettes Pre-curved finger and palm design Open gauntlet cuff for easy entry 180-degree elasticated wrist for a secure fit Touch-compatible thumb and index finger Bold Vertical digital-print graphics Technical Specifications Upper Material: Lightweight polyester bonded with polymesh Palm Material: Synthetic suede Grip: Ergonomic silicone printing on the palm and fingers Finger Panels: Mesh and Lycra fourchettes Seam Construction: Internal Fit: Pre-curved fingers and palm Cuff: Open gauntlet with 180-degree elasticated wrist Touchscreen Use: Compatible thumb and index fingertips Application: Kart racing Who Should Choose the Tech-1 K Race v2 Vertical? The Tech-1 K Race v2 Vertical is an excellent option for club racers, recreational drivers, rental-kart competitors, and developing kart racers who value lightweight comfort and dependable grip. Its combination of ventilation, synthetic suede durability, silicone traction, and touchscreen functionality makes it a practical glove for frequent track use. Alpinestars Tech-1 K Race v2 Vertical Karting Gloves Size Chart Frequently Asked Questions Are the Alpinestars Tech-1 K Race v2 Vertical Gloves designed for karting? Yes. They are purpose-built karting gloves designed to provide lightweight comfort, steering feel, flexibility, and grip. Do these gloves have internal or external seams? They use internal seams for a traditional close-fitting karting-glove feel. What material is used on the palm? The palm is made from synthetic suede, which provides durability while maintaining good steering-wheel sensitivity. How do the gloves improve steering-wheel grip? Ergonomically positioned silicone printing across the palm and fingers increases traction against the steering wheel. Are the Tech-1 K Race v2 Vertical Gloves breathable? Yes. Their lightweight polyester-mesh upper and mesh finger fourchettes promote airflow during warm or extended karting sessions. Why are mesh and Lycra both used between the fingers? Mesh improves airflow, while Lycra provides stretch and flexibility. Together, they create a balance of ventilation, comfort, and movement. Are the fingertips touchscreen compatible? Yes. The thumb and index finger include touch-compatible printing for operating many smartphones, lap timers, and touchscreen devices. What is the benefit of the pre-curved design? The pre-curved fingers and palm follow the natural position of the hand while holding a steering wheel, helping reduce bunching and hand fatigue. How does the cuff stay in place? The open gauntlet cuff uses a 180-degree elasticated wrist that provides easy entry and a secure fit around the wrist. Are these gloves approved for automobile racing? They are designed for karting and should not replace certified flame-resistant automobile racing gloves when FIA or SFI approval is required. How should karting gloves fit? They should fit snugly without restricting finger movement. A close fit helps maintain steering feel and prevents excess material from bunching around the palm.

Sparco Shield Tech Nomex Pants The Shield Tech line of Nomex undergarments provides the highest level of protection and technology for comfort and breathability. The Shield Tech is homologated to the newest FIA standard 8856-2018 which provides the highest fire protection. When designing this new line of undergarments, Sparco studied the drivers seating position to ensure ultimate fit and comfort. Strategic weaving of the material produces increased breathability along with articulation. Shield Tech uses a seamless construction with ultra-soft stretchable material. There are two different woven materials in key areas; thin stretch for comfort and mobility as well as a double perforated panels for increased breathability. The minimal seams are stitched flat with thin specialized thread for added comfort. All Shield Tech pieces are treated with Sparco’s X-Cool treatment, which draws heat from the body surface to cool the driver. In addition to cooling the driver, X-Cool treatment has an anti-bacterial effect. SHIELD TECH NOMEX UNDERLAYER PANT TECHNOLOGY Newest FIA rating, FIA 8856-2021 Seamless stretchable Nomex in key areas for mobility Perforated knit in key areas for breathability Designed for comfort in a driving position Minimal external seams increase driver comfort X-Cool Silver draws heat from the skin to cool the driver, and it has anti-bacterial effect

Racetech RT4119HRW Racing Seat The Racetech RT4119HRW Racing Seat builds upon the success of Racetech's renowned 129 Series, delivering the same exceptional ergonomics, driver support, and safety features in a lighter and more cost-effective package. Trusted by professional racing teams worldwide, the RT4119HRW is engineered for drivers who demand superior containment, comfort, and performance in demanding motorsport environments. Constructed from lightweight fiberglass composite (GRP), the RT4119HRW features integrated head restraints, large harness openings, advanced ventilation to the driver's lower back, and Racetech's proven ergonomic shell design. Whether you're competing in road racing, endurance racing, rally, time attack, or track-day events, the RT4119HRW provides outstanding support and driver confidence. Available in multiple size configurations, the RT4119 Series can be further customized with optional low-profile base cushions and side cushions to achieve the ideal fit for virtually any driver. FIA-Approved Motorsport Performance The Racetech RT4119HRW is homologated to FIA 8855-1999 standards, providing the safety and performance required for a wide range of professional and amateur racing applications. The integrated head restraint design offers additional lateral head protection while maintaining excellent visibility and driver comfort. Mounting Options Side Mount Installation: Compatible with Racetech RTB1009M 5mm aluminum side-mount brackets (sold separately). Back Mount Installation: Compatible with the Racetech RTB2115B shoulder bracket and RTB2005C roll cage clamps. Clamp sizes are available to fit 38mm (1.5"), 41mm (1.625"), and 45mm (1.75") roll cage tubing. Important: To maintain FIA 8855-1999 compliance, most Racetech 119 Series seats require shoulder-level back mounting to the roll cage. The RT4119HRW is designed to meet FIA requirements without mandatory back mounting, making installation simpler while retaining exceptional strength and safety. Racetech RT4119HRW Features FIA 8855-1999 homologated racing seat Integrated head restraints for increased lateral protection Lightweight fiberglass composite (GRP) shell construction Shell weight starting at 7.6 kg (16.8 lb) Large harness guides for proper belt positioning Lower-back ventilation ducting for improved driver comfort Back-mount compatible design Professional-grade ergonomics for reduced driver fatigue Suitable for road racing, endurance racing, rally, autocross, and HPDE applications Available Sizes HRW – Standard Width with Head Restraints WHR – Wide with Head Restraints THR – Tall with Head Restraints WTHR – Wide & Tall with Head Restraints Technical Specifications Homologation: FIA 8855-1999 Shell Material: Fiberglass Composite (GRP) Minimum Weight: 7.6 kg (16.8 lb) Integrated Head Restraints: Yes Harness Compatibility: Multi-Point Racing Harnesses Mounting Type: Side Mount and Back Mount Compatible Available Sizes: Standard, Wide, Tall, and Wide & Tall Why Choose the Racetech RT4119HRW? The RT4119HRW offers the perfect combination of FIA-certified safety, lightweight construction, exceptional driver comfort, and professional-level support. With integrated head restraints, multiple sizing options, and Racetech's race-proven ergonomic design, it remains one of the most popular competition seats for serious racers worldwide. ```

Sabelt X-Pad Racing Seat The Sabelt X-Pad is the perfect seat for those racing Miatas, Corvettes and other cars with limited interior space who still demand the safety of a full-containment seat. The X-Pad is Sabelt’s most compact seat yet, specifically designed to fit in smaller cockpits where drivers want the additional security of a full-containment / halo seat. Sabelt has managed to do this while keeping the interior seat dimensions able to fit most average racing drivers. Sabelt has achieved the interior fit of the seat by replacing bulky seat padding with a significantly thinner, but still comfortable, foam padding. Exterior dimensions of the seat were reduced by changing key elements such as eliminating the "rolled" upper edges of the seat, which reduces the width significantly without narrowing the seat to the point where it would only fit small drivers. The Sabelt X-Pad is a prime example of how game-changing innovation can be discovered in plain-sight; it doesn't always require a shake-up to standard conventions. Sabelt X-Pad Racing Seat Features FIA 8855-1999 homologation. Weight: 19.3 lbs (8.75 kg). Standard side mounting. Perfect full-containment seat for small cockpit cars (Miata, Corvette, etc.) Shoulders and hips designed for Regulation 8862 to improve driver safety.> Rear structural reinforcement.

Aluminum Racing Seat Brackets by Sabelt Laser cut from high-strength aluminum, these lightweight seat brackets are ideal for mounting most side-mount style racing seats. FEATURES: 5mm thick aluminum FIA compliant  Powder coated Black Standard Length: 15.5" long Long Length: 19.25" long    

AiM MXG 1.3 Large Color 7" Data-Logging Dash The AiM MXG 1.3 data-logging dash represents a huge leap forward in racing display flexibility. The brilliant 800x480 pixel, 7.0" color TFT display frees you from the constraints of a single, factory-designed dash display. The MXG shows you the data you want, the way you want in brilliant, high-contrast color. The AiM MXG 1.3 is a large, brilliant dash designed to acquire and display data coming from your ECU, an internal accelerometer and gyro, the included GPS09 module, analog/digital inputs, and pre-defined math channels. Performance data acquisition can be expanded by adding up to eight expansion modules (sold separately). The large 7" high-color TFT display makes it perfect for installation in wider cockpits in touring and GT cars. CONFIGURABLE PAGES You can define all the custom pages you wish, choosing from a large library of page styles and colors. Configure which data you want to see, where, and how it's displayed (including scale limits and units-of-measure) on a page-by-page basis. Moving from page to page is as easy as pushing a button! INPUT/OUTPUT FLEXIBILITY Eight fully configurable analog input channels can sample, log, and display a wide range of temperatures, pressures, and potentiometers (throttle position, steering wheel position, etc). CAN Inputs allow you to further expand the dash by adding an almost limitless number of AiM CAN Data Hubs (Part No. MC-329, sold separately). These hubs let you connect other inputs such as Lambda Controller (O2), SmartyCam 3, and channel expansion hubs, all without using any analog channels. A separate CAN output allows you to send messages to your vehicle's existing CAN network, adding to your vehicle system control possibilities! The MXG 1.3 can also be connected to many different ECUs to log data. An internal three-axis accelerometer, gyroscope, and magnetometer; GPS09C GPS input; four wheel-speed channels; lap time receiver input; and two digital outputs add up to a exceedingly flexible, expandable data-logger that can grow with you and your car set-up. It even has a screw-in port to add analog cameras used for a clear rear view in visibility-challenged race cars! ALARMS & SHIFT LIGHTS Flexible alarms on the MXG 1.3 include six configurable RGB alarm LEDs. You choose the conditions, you choose the colors. Select a solid alarm or flashing one (and the flashing frequency), choose to have an accompanying text message, and set the alarm priorities. The integrated shift light array features a host of advanced multi-colored RGB shift light patterns that can be customized as you like, including RPM max for each individual gear. DIGITAL OUTPUTS The MXG 1.3 features two digital outputs (low-side type, switch to ground) that can be configured to activate/deactivate external systems (switch on/off additional lights, cooling fan relays, fluid circulation pumps, etc.) based on those inputs. MEMORY & WIFI CONNECTIVITY The 4GB non-volatile memory can store hours of information for detailed analysis using AiM's latest RaceStudio 3 software. A secure 802.11 WiFi connection makes it even more convenient to configure, calibrate, and download your data wirelessly! No more need to move your PC close to the vehicle, you can do it from your trailer or tow vehicle up to 60 yards away. AiM SPORTS MXG 1.3 LARGE DASH & DATA LOGGER DETAILS Manufacturer: AiM Sports Manufacturer part no.:  Dimensions: 9.3" x 5.0" x 1.0" Housing: anodized aluminum Display: 7.0" high-contrast color TFT Display resolution: 800x480 pixels Inertial platform: internal 3 axis ±5G accelerometer+ 3 axis gyro max 100 Hz Internal memory: 4GB Connectors: Motorsport, 37-pin (1) Motorsport, 22-pin (1) Binder 712, 5-pin (1) Weight: 2.1 lbs (950g) Waterproof: IP67 ALL KITS INCLUDE: AiM MXG 1.3 data-logging dash GPS09C module with cable USB cable Wiring harness with 37-pin connector User manual & RaceStudio 3 software, downloadable here All other sensors and modules sold separately.

Alpinestars SP v3 Racing Shoes The Alpinestars SP v3 Racing Shoes deliver a refined combination of comfort, protection, and responsive pedal control for competitive auto racing. An anatomically profiled design provides a secure performance fit, while the lightweight racing outsole helps drivers maintain precise control over the brake, throttle, and clutch pedals. The premium suede upper offers excellent flexibility, durability, and comfort. Perforated suede across the tongue improves airflow, helping reduce heat buildup during demanding sprint races, endurance events, autocross, HPDE sessions, and track days. A heat-resistant para-aramidic fiber lining adds strength and protection without unnecessary weight. Lightweight microporous padding around the heel and insole provides additional cushioning, while the reinforced heel counter improves lateral stability under braking and rapid pedal transitions. Premium Suede Construction The SP v3 upper is constructed from premium suede selected for its balance of flexibility, durability, and comfort. Its soft construction allows the shoe to conform closely to the foot while maintaining the support required for accurate pedal operation. Anatomically Profiled Fit Alpinestars uses an anatomically shaped design to create a close, responsive fit around the foot. This streamlined profile helps reduce unnecessary movement inside the shoe and makes it easier to operate closely spaced racing pedals. Improved Ventilation Perforated suede on the tongue promotes airflow through the shoe. The breathable construction helps manage heat and moisture during long driving sessions without adding bulky ventilation materials. Heat-Resistant Para-Aramidic Lining A para-aramidic fiber tubular lining provides excellent heat resistance, structural strength, and lightweight protection. The lining surrounds the foot while maintaining the flexibility needed for smooth and precise pedal inputs. Lightweight Heel and Insole Padding Microporous padding around the heel and insole improves comfort while keeping weight to a minimum. This cushioning helps reduce pressure and fatigue during extended periods behind the wheel. Reinforced Heel Support A compressed leather heel counter reinforces the rear of the shoe for improved protection and lateral stability. This supportive construction helps keep the heel properly positioned during hard braking and quick pedal transitions. Supportive Underfoot Construction A polypropylene lasting board works with leather reinforcement to provide underfoot support and comfort. The structure helps distribute pressure while preserving the sensitivity required from a professional racing shoe. Responsive Alpinestars Racing Sole The exclusive Alpinestars racing outsole uses a lightweight rubber compound with a textured grip pattern. Its low-profile construction provides dependable pedal traction and direct feedback through the brake, throttle, and clutch pedals. Alpinestars SP v3 Racing Shoe Features Premium suede upper for flexibility, comfort, and durability Anatomically profiled racing fit Perforated suede tongue for improved ventilation Heat-resistant para-aramidic fiber tubular lining Lightweight microporous heel and insole padding Compressed leather heel counter Improved lateral stability and heel support Polypropylene lasting board Leather underfoot reinforcement Lightweight Alpinestars rubber racing outsole Textured sole pattern for dependable pedal grip Low-profile design for responsive pedal feedback FIA 8856-2018 homologated Technical Specifications Product: Alpinestars SP v3 Racing Shoes Manufacturer: Alpinestars Upper Material: Premium suede Tongue: Perforated suede Lining: Para-aramidic fiber tubular construction Padding: Lightweight microporous material Heel Counter: Reinforced compressed leather Lasting Board: Polypropylene with leather reinforcement Outsole: Lightweight textured rubber racing sole Certification: FIA 8856-2018 Alpinestars SP v3 Racing Shoes Sizing Chart Frequently Asked Questions Are the Alpinestars SP v3 Racing Shoes FIA approved? Yes. The Alpinestars SP v3 Racing Shoes are homologated to the FIA 8856-2018 standard. Drivers should confirm the current footwear requirements for their racing organization, class, and event. What are the Alpinestars SP v3 Racing Shoes made from? The upper is constructed from premium suede with a perforated suede tongue. The interior uses a heat-resistant para-aramidic fiber tubular lining. How do the Alpinestars SP v3 Racing Shoes fit? The SP v3 has an anatomically profiled, performance-oriented fit designed to hold the foot securely and improve pedal feedback. Racing shoes should fit snugly without causing painful pressure points or restricting circulation. Are the Alpinestars SP v3 Racing Shoes breathable? Yes. Perforations in the suede tongue help circulate air through the shoe and reduce heat buildup during demanding driving sessions. Do the SP v3 Racing Shoes provide good pedal feel? Yes. The lightweight, low-profile rubber outsole is designed to provide direct pedal feedback, while its textured grip pattern helps maintain secure contact with the pedals. What does the reinforced heel counter do? The compressed leather heel counter supports the rear of the foot and improves lateral stability during hard braking, shifting, and rapid pedal transitions. Are these shoes suitable for HPDE and track days? Yes. Their secure fit, breathable construction, supportive heel, and responsive outsole make them suitable for professional competition, club racing, autocross, time trials, HPDE events, and track-day driving. Can the Alpinestars SP v3 be used for karting? The SP v3 can be worn for some karting applications, but it is designed and certified as an auto racing shoe. Karting-specific footwear may provide an outsole better suited to walking through kart paddocks and pit areas. How should I care for suede racing shoes? Allow the shoes to air dry naturally after use and keep them away from direct heat. Use a soft suede brush for light cleaning and avoid unnecessary walking on gravel, rough pavement, or other abrasive surfaces. Comfort, Protection, and Precise Pedal Control The Alpinestars SP v3 Racing Shoes combine premium suede, breathable construction, lightweight cushioning, reinforced heel support, and a responsive racing outsole. Their FIA-approved design provides the comfort, control, and protection required by competitive drivers and serious track-day enthusiasts.

Alpinestars ZX EVO v3 Nomex Underlayer Shirt Ready to turn up the heat without breaking a sweat? The Alpinestars ZX EVO V3 Long Sleeve Top is your secret weapon for staying cool, comfortable, and fully protected on the track. This isn’t just any racing underlayer; it’s Formula 1-specification, crafted with advanced LENZING™ FR fabric—a sustainably produced, flame-resistant viscose fiber that’s as kind to the planet as it is tough on heat. Slide this on under your suit, and you’ll feel the difference instantly: lightweight, breathable, and incredibly soft, like a second skin that’s ready to tackle even the most intense laps. Alpinestars ZX EVO v3 Fireproof Shirt Features & Benefits Unmatched Flame Resistance: Thanks to LENZING™ FR, this top provides permanent flame resistance and thermal insulation, so you can focus on your line without worrying about heat transfer. Barely-There Comfort: Designed to be ultra-light and seamless, it sits perfectly on your torso, reducing pressure points and giving you full freedom to move. Cool & Dry Performance: With advanced moisture-wicking properties, the ZX EVO V3 draws sweat away from your skin, keeping you cooler and fresher, lap after lap. Breathable & Flexible: All-new jacquard mesh with diamond construction provides enhanced stretch and fit, plus top-notch ventilation to keep you in the zone. Imagine slipping into this F1-spec top on a sweltering race day. The soft touch of the LENZING™ FR fabric feels like a cool breeze against your skin, even when the cockpit heats up. And when the race is on, you’ll barely feel it as it fits like a second skin, giving you complete freedom and focus on every turn, every straight. This is performance and comfort engineered for champions. Alpinestars ZX EVO v3 Fireproof Shirt Product Specifications Material: LENZING™ FR cellulosic fiber for flame resistance and thermal insulation Weight: 255g/sqm – designed to keep weight minimal while maximizing comfort Construction: Lightweight, seamless tubular torso with reduced collar seams Fit: Improved stretch fit with breathability and moisture-wicking properties Certifications: FIA 8856-2018 & SFI 3.3 homologated Alpinestars ZX EVO v3 Fireproof Shirt FAQs Is the ZX EVO V3 approved for competitive racing?Yes! It’s certified to both FIA 8856-2018 and SFI 3.3 standards, so you’re good to go for professional racing events. Does the top run true to size?Alpinestars designed the ZX EVO V3 with a revised pattern that offers a snug, optimized fit. If you’re between sizes, consider sizing up for a perfect feel. How does it compare to regular racing tops?With its Formula 1 pedigree, the ZX EVO V3 is leagues ahead in terms of comfort, breathability, and flame resistance, thanks to the LENZING™ FR material. So, are you ready to race with confidence, style, and the ultimate protection? Hit that checkout button and let the ZX EVO V3 take your driving comfort and safety to the next level

Alpinestars Tempest V2 Waterproof Karting Gloves The Alpinestars Tempest V2 Waterproof Karting Gloves are designed for racers facing rain, cold temperatures, standing water, and difficult track conditions. Their three-layer construction combines waterproof protection with a soft fleece lining to help keep the hands warm, dry, and responsive throughout the session. An advanced rubber-composite palm provides dependable traction against a wet steering wheel, while pre-curved fingers reduce material bunching around the joints. The extended gauntlet, adjustable cuff, and elasticated wrist create a secure fit that helps limit the entry of wind and water. Three-Layer Waterproof Construction The Tempest V2 uses a three-layer design developed specifically for wet-weather karting. Its protective construction helps prevent rain and track spray from reaching the hands while retaining enough flexibility for precise steering inputs. This makes the Tempest V2 substantially more suitable for rain racing than a conventional lightweight kart glove, which may quickly absorb water and lose insulation. Full Fleece Lining for Cold Conditions A full fleece lining provides warmth and a soft interior feel during cold or damp sessions. Maintaining hand temperature is important because cold fingers can become stiff, reducing grip strength and slowing steering corrections. The insulated construction is designed to offer useful warmth without turning the glove into a bulky general-purpose winter glove. Advanced Rubber-Composite Palm The palm uses an advanced rubber-composite material that provides reliable steering-wheel grip in difficult weather. Its textured surface helps prevent the hands from slipping when moisture reaches the wheel or glove. The palm construction also preserves the feedback needed to recognize steering load, front-tire grip, and changes in track conditions. Pre-Curved Finger Construction The fingers are shaped around the natural position of the hand while holding a kart steering wheel. This pre-curved design reduces material bunching and limits the effort required to maintain a secure driving position. Reducing resistance through the fingers can improve dexterity and comfort during long rain races, testing sessions, and repeated wet-weather heats. Straight-Cut Gauntlet Cuff An extended straight-cut gauntlet provides additional coverage around the wrist and creates a protective overlap with the karting-suit sleeve. The longer cuff helps reduce gaps where rain or cold airflow could enter. Correct cuff positioning is especially important in heavy rain, since water can travel along the sleeve and into a glove that is not properly overlapped. Adjustable Cuff Closure An adjustable closure allows the driver to tighten the gauntlet around the wrist or suit sleeve. This helps keep the glove securely positioned while improving protection against water and wind. The adjustable design also accommodates differences in suit-sleeve thickness and driver preference. 180-Degree Elasticated Wrist The palm side of the wrist incorporates 180-degree elasticated construction. This allows the opening to stretch during entry and then contract around the wrist once the glove is in place. The elastic section helps prevent the glove from moving independently of the hand during quick steering corrections. Wet-Weather Control Without Excessive Bulk Waterproof gloves must balance protection with steering sensitivity. The Tempest V2 is thicker than a dry-weather kart glove because of its layered construction and fleece insulation, but its ergonomic shape helps limit unnecessary bulk. The result is a specialized rain glove that provides significantly more weather protection while retaining the hand movement required for competitive karting. Alpinestars Tempest V2 Waterproof Glove Features Three-layer construction provides waterproof performance Full fleece lining delivers warmth in cold conditions Advanced rubber-composite palm improves wet-weather grip Pre-curved fingers reduce material bunching Ergonomic shape supports precise steering movement Straight-cut gauntlet provides extended wrist coverage Adjustable cuff allows a secure personalized fit 180-degree elasticated wrist assists entry and retention Designed specifically for cold and wet karting conditions Black and fluorescent-green Alpinestars styling Alpinestars Tempest V2 Waterproof Glove Specifications Manufacturer: Alpinestars Model: Tempest V2 Waterproof Product Type: Wet-Weather Karting Gloves Construction: Three-Layer Waterproof Design Interior: Full Fleece Lining Palm: Advanced Rubber Composite Finger Shape: Pre-Curved Cuff: Adjustable Straight-Cut Gauntlet Wrist: 180-Degree Elasticated Construction Color: Black and Fluorescent Green Intended Use: Cold and Wet-Weather Karting Tempest V2 Versus Tempest V3 The Tempest V2 is the previous-generation Alpinestars wet-weather karting glove. It provides three-layer waterproof construction, fleece insulation, an advanced rubber-composite palm, and an adjustable extended cuff. The newer Tempest V3 uses updated styling and current-generation construction. Drivers entering events with mandatory glove homologation should verify the required standard and choose the version carrying the certification accepted by their series. When to Choose the Tempest V2 The Tempest V2 is best suited to rain races, cold testing days, winter karting, and unpredictable outdoor events. It is especially useful for drivers whose hands become cold or numb in conventional uninsulated gloves. For warm and dry racing, a thinner ventilated glove will normally provide better airflow and more direct steering feel. Alpinestars Tempest V2 Waterproof Karting Glove Size Chart Frequently Asked Questions Is the Alpinestars Tempest V2 fully waterproof?Alpinestars describes the Tempest V2 as having a three-layer construction for waterproof performance. Correct cuff positioning is still important because water may enter through the opening if rain runs down the sleeve. Is the Tempest V2 currently FIA 8877-2022 approved?The current Alpinestars product information does not state FIA 8877-2022 homologation for the Tempest V2. Racers competing under mandatory equipment rules should verify acceptance with their series before ordering. Was the Tempest V2 CIK-FIA Level 2 homologated?Some older retailer listings describe it as CIK-FIA Level 2, but the current official product page does not display that certification. Check the physical homologation label on the glove and confirm it with the event organizer before relying on it for competition eligibility. How does the Tempest V2 palm differ from the Tempest V3?The Tempest V2 uses an advanced rubber-composite palm. The newer Tempest V3 is described with a silicone-printed palm, giving the two generations different grip constructions. Will the fleece lining make the gloves feel tighter?Yes. The lining and waterproof layers take up more interior space than a dry-weather glove. The fit should remain secure without compressing the fingers or limiting circulation. Should I order one size larger than my normal kart gloves?Not automatically. Begin with the Alpinestars size chart and account for the insulated construction. Move up only when the measured size or hand shape indicates that the regular size would be restrictive. Can I wear a liner glove underneath the Tempest V2?Only when enough room remains for unrestricted movement. A liner can make the glove too tight, which may reduce circulation, warmth, and steering sensitivity. Are the Tempest V2 Gloves good for temperatures below freezing?They provide more insulation than standard kart gloves, but they are not heavily insulated snow gloves. Comfort below freezing depends on session length, wind, moisture, and the driver’s sensitivity to cold. How should the cuff overlap the karting suit?Arrange the cuff and suit sleeve so water cannot run directly into the glove opening. The best orientation can depend on the suit sleeve and the direction in which water travels across the arm. Can these gloves be used during a dry but cold race?Yes. Their fleece lining and wind protection can be useful in cold, dry conditions. In warmer weather, they may feel too insulated compared with a lightweight kart glove. Are they suitable for rental karting or sim racing?They can be used for either, but their waterproof membrane and fleece lining are unnecessary in a climate-controlled environment. A lighter glove will usually be cooler and provide a more direct feel. How should wet Tempest V2 Gloves be dried?Allow them to air dry naturally in a ventilated area. Do not place them on a radiator, use a heated dryer, or expose them to direct high heat, which may damage the membrane, lining, or palm material. Can the Tempest V2 be machine washed?Gentle hand cleaning with cool water and mild detergent is the safer option. Avoid bleach, fabric softener, harsh chemicals, machine drying, and aggressive scrubbing of the palm. How should waterproof karting gloves be stored?Make sure they are completely dry before storage. Keep them in a cool, ventilated location rather than sealing damp gloves inside a gear bag.

HANS Sport 2 Tether Kits Replace the tether kit on your HANS Sport 2 if you're involved in an incident, or swap out your existing tether for a longer or shorter one. For use with Sliding tethers and post anchors only.

AiM MyChron 5 Battery Replacement Pack Have a charged extra MyChron 5 battery pack, ready to go. Be ready for anything on the kart track with this rechargeable Lithium battery. You will no longer need to carry with you or worse, locate at your track, your dead MyChron 5 Battery. The MyChron 5 rechargeable battery lasts more than ten hours. Charge it in your shop, trailer, or truck just like a cell phone and use it all day long. MyChron 5 can also be powered by an external 12V power source if you are running external sensors or AiM SmartyCams. AiM MyChron 5 Battery Replacement Pack Details: Manufacturer: AiM Manufacturer part number: 2BT18650TDM Manufacturer alternate part number: AIM-MC-111 Fits MyChron 5 and MyChron 5 2T: Yes Fits MyChron 4: No

OMP KS-1 Pro FIA 8870-2018 Rib Protector Professional FIA 8870-2018 Karting Body Protection The OMP KS-1 Pro Rib Protector delivers professional-level protection for competitive kart racers with a lightweight, ergonomic design that prioritizes both safety and comfort. Homologated to the FIA 8870-2018 Karting Body Protection (KBP) standard, the KS-1 Pro provides comprehensive protection for the ribs, chest, and back while maintaining exceptional freedom of movement behind the wheel. Constructed with a high-strength polycarbonate outer shell, nitrile rubber impact layer, and energy-absorbing memory foam, the KS-1 Pro is engineered to dissipate impact energy while remaining lightweight enough for long race weekends. An auto-adjustable fitting system, combined with fully adjustable shoulder and waist straps, provides a secure, personalized fit for drivers of virtually every body type. Available in multiple sizes, including Wide versions for broader drivers, the KS-1 Pro has become a popular choice among club racers, national competitors, and international karting professionals looking for FIA-approved protection without sacrificing comfort. OMP KS-1 Pro Rib Protector Features FIA 8870-2018 homologated Karting Body Protector (KBP) High-strength polycarbonate outer shell Nitrile rubber and energy-absorbing memory foam impact protection Protects the ribs, chest, and back Auto-adjustable fit system for outstanding comfort Fully adjustable shoulder and waist straps with hook-and-loop closures Ergonomic front shield improves comfort while driving Available in multiple sizes, including Wide fit options Designed for sprint karting, shifter karting, and endurance kart racing Why Choose the OMP KS-1 Pro? The KS-1 Pro combines FIA-certified protection with exceptional ergonomics, making it an outstanding choice for serious kart racers. Its lightweight construction, advanced impact-absorbing materials, and highly adjustable fit allow drivers to stay protected without compromising comfort or mobility. OMP KS-1 Pro Rib Protector Size Chart Frequently Asked Questions Is the OMP KS-1 Pro FIA certified? Yes. The KS-1 Pro is homologated to the FIA 8870-2018 Karting Body Protection (KBP) standard and is approved for FIA karting competition. Is the KS-1 Pro made from carbon fiber? No. The KS-1 Pro uses a high-strength polycarbonate outer shell combined with nitrile rubber and memory foam to provide outstanding impact protection while keeping weight low. What areas does the KS-1 Pro protect? The protector is designed to provide coverage for the ribs, chest, and back while maintaining excellent driver mobility. What makes the KS-1 Pro different from basic rib protectors? The KS-1 Pro combines FIA 8870-2018 homologation, advanced impact-absorbing materials, an ergonomic design, and an auto-adjustable fitting system for professional-level protection and comfort. Can it be worn under modern kart suits? Yes. The low-profile ergonomic design is intended to fit comfortably under modern FIA 8877-2022 karting suits without restricting movement. Are Wide sizes available? Yes. Wide versions are available in select sizes to provide improved comfort and fit for drivers with broader chest and torso measurements. Is the KS-1 Pro suitable for junior drivers? OMP offers multiple sizes, allowing many junior drivers to achieve a proper fit. Always use the official sizing chart to select the correct size for maximum protection.

Stilo WRC Intercom Systems The Stilo WRC Series Intercom Systems were designed to be securely installed on the roll bar, where it's easy to reach and convenient to adjust. They plug directly into your Stilo helmet with the included IMSA cables for clear, pitch-perfect audio while on track. The WRC Series feature an automatic On/Off switch controlled through co-driver plug connection; no more starting races disconnected. Individual volume adjustment for each connected helmet. Nine-volt power supply standard (uses a 9V battery), with 12V available as option to plug into the car's electrical supply. Camera and radio connections are also possible with these units. WRC 03 INTERCOM SYSTEM The Stilo WRC 03 intercom is equipped with top-of-the-line WRC electronics. Designed for compatibility with Trophy Plus, WRC, and ST5 helmets, as well as WRC headsets. Amplify sound clarity with matched electronics. Runs on standard 9-volt battery, with optional car adapter for continuous power. WRC DES INTERCOM SYSTEM The WRC DES includes an advanced noise-canceling "extra filter" which effectively eliminates background noise to make driver/co-driver communications clearer than ever! WRC DG-10 INTERCOM SYSTEM For more advanced communication needs, the DG-10 includes noise-cancellation as well as a Bluetooth connection for simplicity at its finest. DG-10 Includes the following: Digital active noise cancellation with SDA filter Integrated Bluetooth for mobile phone connection Camera and radio connections WRC DG-30 INTERCOM SYSTEM Digital active noise cancellation with SDA filter Separate main intercom box which can be positioned under the seats to offer a lower center of gravity Remote control panel GSM module integrated into the intercom box with a SIM card slot Camera and radio connections DG-30 includes the following: Main unit with GSM module integrated remote control panel external aerial Stilo WRC 03 SKU: AB0200 Stilo WRC-DES SKU: AB0214 Stilo WRC DG-10 SKU: AB0500 Stilo WRC DG-30 SKU: AB0600