Girodisc
D1-153 GiroDisc Replacement Rotors
$800.00
D1-153 GiroDisc Replacement Rotors
REPLACEMENT ROTOR RINGS ONLY, DOES NOT INCLUDE ALUMINUM HAT.
Need new rings for your Girodisc two-piece rotors? We've got them. Rings come complete with brand new hardware and full instructions for re-assembly.Sold and priced per pair
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
D2-146 Girodisc Rear Replacement Rotor Rings (Porsche 991 GT3-GT3RS) (Steel)
$1,030.00
D2-146 Girodisc Rear Replacement Rotor Rings (Porsche 991 GT3-GT3RS) (Steel)
Replacement rotor rings for the Girodisc A2-146 two-piece floating rotors for the Porsche 991 GT3/GT3RS (oem steel rotors). Includes all hardware necessary for safely replacing worn rotor rings.
Sold/priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A1-039 Girodisc 2pc Front Brake Rotors (Camaro 2010-2015)
$1,100.00
A1-039 Girodisc 2pc Front Brake Rotors (Camaro 2010-2015)
FITS: Chevy Camaro Gen 5 front (2010-2015)
is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products the same or next business day to ensure we meet your delivery deadline.
This Girodisc system upgrades the OEM brakes to a two-piece steel disc and aluminum hat. This two-piece "floating rotor" design will bolt directly to your Gen 5 Camaro front and work flawlessly with the OEM calipers.
Upgrading your brakes to lightweight, high-performance Girodisc rotors, you maintain the factory brake bias and ABS effectiveness. Much lighter than the OEM rotors, Girodisc rotors reduce rotational and unsprung mass giving you stronger braking and faster suspension response.
Combined with Pagid or PFC performance brake pads and RF-1 racing brake fluid, Girodisc rotors are the ultimate solution to overheated, cracked, warped rotors that result from high-performance driving.
The central hat of the rotor is made from 6061-T6 aircraft aluminum. The disc is manufactured in the USA from the same cast iron used by professional racing organizations. Its curved-vane design, developed in racing, acts like a centrifugal pump forcing cool air through the disc.
The disc and hat mount together through a floating mount system using ten cadmium plated, high-strength alloy steel drive pins manufactured by Girodisc. These drive pins transfer braking load while maintaining axial and radial float between the disc and hat to allow for heat expansion. Anti-noise spring washers eliminate the noise typically associated with floating rotors.
This two-piece Girodisc design allows for disc-only replacement, reusing the hat to minimize maintenance costs.
Sold/priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A1-053 Girodisc 2pc Front Brake Rotors
$995.00
A1-053 Girodisc 2pc Front Brake Rotors
This kit will not fit the Audi A6, RS6, or Allroad with the 4.2L V8 engine.
FITS THE FOLLOWING CARS:
Audi S4 (B5) and Audi A6/Allroad (C5) with Alcon or Stoptech 355x32mm big brake kit
Audi S4 (B5) and Audi A6/Allroad (C5) with the 2.7L twin-turbo engine
is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products the same or next business day to ensure we meet your delivery deadline.
This Girodisc system upgrades the OEM brakes to a two-piece steel disc and aluminum hat. This two-piece floating rotor design will bolt directly to your Audi front and work flawlessly with the OEM calipers.
Upgrading your brakes to lightweight, high-performance Girodisc rotors, you maintain the factory brake bias and ABS effectiveness. Much lighter than the OEM rotors, Girodisc rotors reduce rotational and unsprung mass giving you stronger braking and faster suspension response.
Combined with Pagid or PFC performance brake pads and RF-1 racing brake fluid, Girodisc rotors are the ultimate solution to overheated, cracked, warped rotors that result from high-performance driving.
The central hat of the rotor is made from 6061-T6 aircraft aluminum. The disc is manufactured in the USA from the same cast iron used by professional racing organizations. Its curved-vane design, developed in racing, acts like a centrifugal pump forcing cool air through the disc.
The disc and hat mount together through a floating mount system using ten cadmium plated, high-strength alloy steel drive pins manufactured by Girodisc. These drive pins transfer braking load while maintaining axial and radial float between the disc and hat to allow for heat expansion. Anti-noise spring washers eliminate the noise typically associated with floating rotors.
This two-piece Girodisc design allows for disc-only replacement, reusing the hat to minimize maintenance costs.
Sold/priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A1-152 Girodisc 2pc Front Brake Rotors for Audi TT RS (380mm)
$1,150.00
A1-152 Girodisc 2pc Front Brake Rotors for Audi TT RS (380mm)
FITMENT: Audi TT RS (8J), Front
This Girodisc system is an upgrade from the 365mm stock front brake rotors to a two-piece, 380mm steel rotors and aluminum hat combination . It is a direct replacement for the OEM brake rotors, needing no modifications. The two-piece floating rotors will bolt directly to your Audi and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency.
Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response.
When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (available from ), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance.
Sold/priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A1-123 Girodisc 2pc Front Brake Rotors for Mercedes SLS AMG
$1,550.00
A1-123 Girodisc 2pc Front Brake Rotors for Mercedes SLS AMG
FITMENT: Mercedes SLS AMG
is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake rotors. These two-piece floating rotors will bolt directly to the car and work with your OEM calipers perfectly. By upgrading your brakes with these lightweight, high-performance replacements (as opposed to a big brake kit), your factory brake bias is maintained, along with your ABS efficiency.
Girodisc two-piece floating rotors are lighter than OEM brake rotors. This reduction in rotational mass and unsprung weight allows for quicker acceleration, sharper steering, and faster suspension response.
When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (available from ), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance.
Sold/priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
D2-081 Girodisc Rear Replacement Rotor Rings
$580.00
D2-081 Girodisc Rear Replacement Rotor Rings
This high-performance product is built to meet the demands of competitive racing. Designed for durability, precision, and track-day performance.
Engineered for Performance on the Track
FITMENT (REAR):
Ford Shelby GT500 (2007-12)
Ford Mustang BOSS 302(S)
Ford Mustang GT (2011-14 w/ Brembo calipers)
REPLACEMENT ROTOR RINGS ONLY.
Need new rings for your Girodisc two-piece rotors? We've got them. Replacement rings come complete with new hardware and full instructions for re-assembly. Or, if you like, you can send us the hats and we will do all the re-assembly for only the cost of shipping. This service is available for the life of your rotors.Price is for a pair of rings and two hardware kits.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A1-091 Girodisc 2pc Front Brake Rotors (Ford GT500 2013-2014)
$1,150.00
A1-091 Girodisc 2pc Front Brake Rotors (Ford GT500 2013-2014)
FITMENT: Ford Mustang GT500 w/ 380mm rotors (2013-14)
is an authorized dealer for Girodisc products and we are one of the largest stocking dealers in the country. We ship most products same or next business day to ensure we meet your delivery deadline.
The Girodisc system is an upgrade to a two-piece steel rotor and aluminum hat combination as a direct replacement for the OEM brake rotors. The two-piece floating rotors will bolt directly to your GT500 and work flawlessly with the OEM calipers. By upgrading your brakes with these lightweight, high-performance replacements -- as opposed to a big brake kit -- your factory bias is maintained as well as your ABS effectiveness and efficiency.
Girodisc rotors are lighter than OEM pieces; this reduction in rotational and unsprung weight (8 lbs./3.6kg per corner!) allows for quicker acceleration, stronger braking, and faster suspension response.
When used with Pagid racing brake pads and RF-1 racing brake fluid, you have the best possible solution to overheating, cracking, and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron constructed in the USA, made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes ten high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade-12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The two-piece Girodisc design allows for disc-only replacement as well, minimizing future replacement costs and delivering outstanding performance.
Sold/priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A2-155 Girodisc 2pc Rear Brake Rotors (OEM Steel)
$1,750.00
A2-155 Girodisc 2pc Rear Brake Rotors (OEM Steel)
These Rotors Fit The Following Cars (w/ OEM Steel Rotors):
Porsche 981 Cayman GT4 Rear
Porsche 718 Cayman GT4 Rear
Porsche 991 Turbo/Turbo S Rear
This Girodisc system upgrades your Porsche OEM rear brakes to 380mm two-piece steel discs and aluminum hats. This two-piece floating rotor design will bolt directly to your Porsche GT4 or Turbo and work flawlessly with the OEM calipers using the included machined aluminum spacers. Especially when paired with the Girodisc A1-066 front Porsche rotors , upgrading your brakes to lightweight, high-performance Girodisc rotors, you maintain the factory brake bias and ABS effectiveness. Much lighter than the OEM rotors, Girodisc rotors reduce rotational and unsprung mass giving you stronger braking and faster suspension response.
Combined with Pagid or PFC racing brake pads and Performance RF1 racing brake fluid, Girodisc rotors are the ultimate solution to overheated, cracked OEM Porsche rotors that result from high-performance driving. The central hat of the rotor is made from 6061-T6 aircraft aluminum. The disc is manufactured in the USA from the same cast iron used by professional racing organizations. Its curved-vane design, developed in racing, acts like a centrifugal pump forcing cool air through the disc.
The disc and hat mount together through a floating mount system using ten cadmium plated, high-strength alloy steel drive pins manufactured by Girodisc. These drive pins transfer braking load while maintaining axial and radial float between the disc and hat to allow for heat expansion. Anti-noise spring washers eliminate the noise typically associated with floating rotors.This two-piece Girodisc design allows for disc-only replacement, reusing the hat to minimize maintenance costs.
Sold/priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A1-031 Girodisc 2pc Front Brake Rotors (340mm)
$1,250.00
A1-031 Girodisc 2pc Front Brake Rotors (340mm)
FITS PORSCHE:
986 Boxster S (front)
987 Boxster S/Cayman S (front)
996 Carrera 2/Carrera 4(front)
997.1 Carrera 2/Carrera 4(front)
is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products the same or next business day to ensure we meet your delivery deadline.
This Girodisc system upgrades the 317mm OEM one-piece front rotors to 340mm two-piece steel discs and aluminum hats. Caliper spacers are included to accommodate the larger rotors. This two-piece "floating rotor" design will bolt directly to your Porsche front and work flawlessly with the OEM calipers.
Upgrading your brakes to lightweight, high-performance Girodisc rotors, you maintain the factory brake bias and ABS effectiveness. Much lighter than the OEM rotors, Girodisc rotors reduce rotational and unsprung mass giving you stronger braking and faster suspension response.
Combined with Pagid or PFC performance brake pads and RF-1 racing brake fluid, Girodisc rotors are the ultimate solution to overheated, cracked, warped rotors that result from high-performance driving.
The central hat of the rotor is made from 6061-T6 aircraft aluminum. The disc is manufactured in the USA from the same cast iron used by professional racing organizations. Its curved-vane design, developed in racing, acts like a centrifugal pump forcing cool air through the disc.
The disc and hat mount together through a floating mount system using ten cadmium plated, high-strength alloy steel drive pins manufactured by Girodisc. These drive pins transfer braking load while maintaining axial and radial float between the disc and hat to allow for heat expansion. Anti-noise spring washers eliminate the noise typically associated with floating rotors.
This two-piece Girodisc design allows for disc-only replacement, reusing the hat to minimize maintenance costs.
Sold/priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A2-035 Girodisc 2pc REAR Brake Rotors (325mm)
$1,250.00
A2-035 Girodisc 2pc REAR Brake Rotors (325mm)
The Girodisc system is an upgrade to a 325mm two-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The two-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
When used with Girodisc Magic Pads on the street, Pagid or PFC racing pads on track, and RF1 brake fluid (all available from ), you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by Girodisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The two-piece Girodisc design allows for rotor only replacement as well to minimize future replacement costs.
Sold/Priced per pair
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
D1-031 GiroDisc Replacement Rotors
$780.00
D1-031 GiroDisc Replacement Rotors
Replacement Rotor Rings Only -- No Center Hat
The Girodisc replacement rotor system is a direct rotor disc replacement for the Girodisc 2-piece hat and rotor and no modifications are necessary.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by Girodisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece Girodisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling.
Sold/priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A2-049 Girodisc 2pc REAR Brake Rotors (OEM PCCB)
$1,350.00
A2-049 Girodisc 2pc REAR Brake Rotors (OEM PCCB)
This high-performance product is built to meet the demands of competitive racing. Designed for durability, precision, and track-day performance.
Engineered for Performance on the Track
FITS:
PORSCHE 987 Boxster S / Spyder / Cayman S / Cayman R WITH OEM PCCB
PORSCHE 981 Cayman S / Boxster S WITH OEM PCCB
The Girodisc system is an upgrade to a 350mm 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency.
When used with Pagid or PFC performance brake pads, and RF-1 brake fluid (also available from Discovery Parts), you have an amazing solution to overheated or cracking PCCB rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors' curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to their own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by Grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece Girodisc design allows for rotor only replacement as well to minimize future replacement costs.
Sold/Priced per pair.
Features:
• Built for racing reliability and consistent performance
• Compatible with demanding track environments
• Designed for perfect fit and easy installation
FAQs:
Is this part track-proven? Yes, it has been tested extensively under racing conditions.
Does it require professional installation? While not required, professional installation is recommended for best performance.
Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility.
Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.
Girodisc
A1-032 Girodisc 2pc Front Brake Rotors (350mm)
$1,350.00
A1-032 Girodisc 2pc Front Brake Rotors (350mm)
Commonly also used in the 718 GTS 4.0 Non-PCCB. is an authorized dealer for Girodisc products. As one of the largest stocking dealers in the country, we ship most products the same or next business day to ensure we meet your delivery deadline.
This Girodisc system upgrades the OEM brakes to a two-piece steel disc and aluminum hat. This two-piece "floating rotor" design will bolt directly to your car and work flawlessly with the OEM calipers.
Upgrading your brakes to lightweight, high-performance Girodisc rotors, you maintain the factory brake bias and ABS effectiveness. Much lighter than the OEM rotors, Girodisc rotors reduce rotational and unsprung mass giving you stronger braking and faster suspension response.
Combined with Pagid or PFC performance brake pads and RF-1 racing brake fluid, Girodisc rotors are the ultimate solution to overheated, cracked, warped rotors that result from high-performance driving.
The central hat of the rotor is made from 6061-T6 aircraft aluminum. The disc is manufactured in the USA from the same cast iron used by professional racing organizations. Its curved-vane design, developed in racing, acts like a centrifugal pump forcing cool air through the disc.
The disc and hat mount together through a floating mount system using ten cadmium plated, high-strength alloy steel drive pins manufactured by Girodisc. These drive pins transfer braking load while maintaining axial and radial float between the disc and hat to allow for heat expansion. Anti-noise spring washers eliminate the noise typically associated with floating rotors.
This two-piece Girodisc design allows for disc-only replacement, reusing the hat to minimize maintenance costs.
Sold/priced per pair.
Girodisc
A2-031 Girodisc 2pc Rear Brake Rotors (325mm)
$1,250.00
A2-031 Girodisc 2pc Rear Brake Rotors (325mm)
The Girodisc system is an upgrade to a 325mm 2-piece steel rotor and aluminum hat combination and is a direct replacement for the OEM brake disc. The 2-piece floating disc will bolt directly to the car and work with OEM calipers perfectly. By upgrading your brakes with these lightweight high-performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc rotors are lighter than OEM pieces. The reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.
When used with Pagid or PFC racing brake pads and Performance RF-1 racing brake fluid, you have an amazing solution to overheating, cracking and warping rotors.
The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is manufactured from cast iron which is constructed in the USA and is made to the same specification with the same material used by professional racing organizations. The rotors curved vane design was developed in racing and acts as a centrifugal pump to force cooling air through the disc.
The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by Girodisc in the USA to our own specifications and are cadmium plated for corrosion resistance. The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat. The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors.
The 2-piece Girodisc design allows for rotor only replacement as well to minimize future replacement costs and deliver outstanding performance and cooling.
Sold/priced per pair.
Girodisc
A1-066 Girodisc 2pc Front Brake Rotors (OEM Steel)
$1,750.00
A1-066 Girodisc 2pc Front Brake Rotors (OEM Steel)
FITS THE FOLLOWING CARS (OEM Steel Rotors):
Porsche 981 Cayman GT4
Porsche 718 Cayman GT4
Porsche 991 Turbo/Turbo S
Porsche 997 Turbo
This Girodisc system upgrades the OEM front brakes to a 380mm two-piece steel disc and aluminum hat. This two-piece "floating rotor" design will bolt directly to your GT4 front and work flawlessly with the OEM calipers. Particularly when paired with the Girodisc A2-155 rear rotors, upgrading your brakes to lightweight, high-performance Girodisc rotors maintains the factory brake bias and ABS effectiveness. Much lighter than the OEM rotors, Girodisc rotors reduce rotational and unsprung mass giving you stronger braking and faster suspension response.Combined with Pagid or PFC racing brake pads and RF1 racing brake fluid, Girodisc rotors are the ultimate solution to overheated, cracked, warped OEM Porsche rotors that result from high-performance driving.
The central hat of the rotor is made from 6061-T6 aircraft aluminum. The disc is manufactured in the USA from the same cast iron used by professional racing organizations. Its curved-vane design, developed in racing, acts like a centrifugal pump forcing cool air through the disc.The disc and hat mount together through a floating mount system using ten cadmium plated, high-strength alloy steel drive pins manufactured by Girodisc. These drive pins transfer braking load while maintaining axial and radial float between the disc and hat to allow for heat expansion. Anti-noise spring washers eliminate the noise typically associated with floating rotors.
This two-piece Girodisc design allows for disc-only replacement, reusing the hat to minimize maintenance costs.
Sold/priced per pair.
