Best Selling Products

CMS Performance Bolt In Roll Bar For BMW F87 M2 (2016-2021) This Roll Bar Fits the Following Cars: BMW M2 (N55) 2016-2018 BMW M2 Competition (S55) 2019-2020 BMW M2 CS 2020-2021 THE PREMIER BOLT-IN ROLL BAR FOR THE ICONIC M2 The CMS Performance Roll Bar is the strongest, safest, most beautifully constructed bolt-in roll bar on the market for the BMW M2, M2 Competition, and M2 CS. Engineered with a premium on safety and structural rigidity, the exceptional design integrates perfectly with the M2's luxury/sport interior. CMS uses only advanced Docol R8 Advanced High-Strength Steel tubing throughout each roll bar, giving you unequalled tensile strength and occupant protection. Docol R8 is 15% stronger than 4130 CrMo steel and 30% stronger than mild (DOM) steel used in other bolt-in roll bars. It is superior in every way: resistance to deformation, weld strength, and energy dissipation. Our one-piece main hoop with fully-integrated X-bracing and harness bar bolts directly to the chassis, forming the backbone of the CMS Performance Roll Bar. Rearward "kicker" supports are optimized for support in a roll-over event while maintaining an unobstructed rear view. The harness bar is specifically designed to locate racing harness shoulder straps at the proper angle (0 to -20 ) to the driver's shoulders regardless of seat position. The CMS Performance BMW M2 Roll Bar is designed to bolt directly to the M2 chassis strong points without the need for any modification of existing interior trim or use of backing plates. Adding a CMS custom designed rear seat delete gives the whole installation a clean, factory appearance. Full 360o TIG welding throughout gives the CMS Performance Roll Bar unsurpassed strength and durability. Each roll bar includes custom powder coating in your choice of matched M2 factory colors1, satin black for a more stealthy appearance, or any of over 5,000 custom powder coat colors for a truly customized look. Our unwavering focus on using cutting-edge materials, unsurpassed design & construction, and premium fit & finish has taken CMS Performance Roll Bars to the top of the industry. The BMW M2 roll bar is the latest addition to our growing catalog, bringing safety, integrity, and beauty to customers taking their M2 to the track! Click Here for Installation Instructions CMS PERFORMANCE BMW F87 M2 ROLL BAR OPTIONS CMS premium Rear Seat Delete Kit is custom-designed for the F87 M2, giving your roll bar installation a factory-finished look. Schroth Profi II ASM four-point harnesses have a patented anti-submarine design to give you racing harness safety with your factory BMW seats. CMS Roll Bar Harness Collars help keep your shoulder straps safely and securely in place on the harness cross-bar. CMS PERFORMANCE BMW F87 M2 ROLL BAR DETAILS Manufacturer: CMS Performance Manufacturer part no.: CPRB-F87 Materials: Docol R8 Advanced High Strength Steel tubing 1.75 x 0.095; CNC-cut carbon steel mounting plates; CNC-machined solid steel interlocking roll bar joints Construction: full penetration 360º TIG welding Design features: one-piece main hoop for strength; three-piece kickers ease installation; allows full seat travel with virtually any seat Optional custom-designed rear seat delete All American-made Grade 8 hardware included Detailed installation instructions Installation requires removal of the factory rear seats. A rear seat delete kit is recommended but not required for roll bar installation. This product is intended for off-road use only. 1 Note: CMS Performance powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car.

D1-007 GiroDisc Replacement Rotors REPLACEMENT ROTOR DISCS ONLY, DOES NOT INCLUDE ALUMINUM HAT. The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.   The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

D1-008 GiroDisc Replacement Rotors FITS: MITSUBISHI EVO 6/7/8/9 REPLACEMENT ROTOR DISCS ONLY, DOES NOT INCLUDE ALUMINUM HAT. is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.   The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade 12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair. Features: • Built for racing reliability and consistent performance • Compatible with demanding track environments • Designed for perfect fit and easy installation FAQs: Is this part track-proven? Yes, it has been tested extensively under racing conditions. Does it require professional installation? While not required, professional installation is recommended for best performance. Will this fit my vehicle? Please refer to the fitment guide or contact us to confirm compatibility. Can I return this if it doesn’t fit? Yes, as long as it’s unused and in original packaging.

D1-015 GiroDisc Replacement Rotors FITS: FERRARI 360 CHALLENGE REPLACEMENT ROTOR DISC ONLY, DOES NOT INCLUDE ALUMINUM HAT. is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.   The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

D1-001 GiroDisc Replacement Rotors Fitment: Ferrari F430 REPLACEMENT ROTOR DISC ONLY, DOES NOT INCLUDE ALUMINUM HAT. Need new rings for the Girodisc two-piece rotors on your Ferrai F430 or 360 Modena?  We've got them.  Rings come complete with all-new hardware and full instructions for re-assembly.Sold/priced per pair.

D1-002 GiroDisc Replacement Rotors FITS: FERRARI 348/355 REPLACEMENT ROTOR DISC ONLY, DOES NOT INCLUDE ALUMINUM HAT. is an Authorized dealer for GiroDisc products and we are one of the largest stocking dealers in the country.  We ship most products same or next business day to ensure we meet your delivery deadline. The GiroDisc replacement rotor system is a direct rotor disc replacement for the Giro Disc 2-piece hat and rotor and no modifications are necessary.   >The rotor and hat mount together through a floating mount system which utilizes 8-10 high strength alloy steel drive pins manufactured by GiroDisc in the USA to our own specifications and are cadmium plated for corrosion resistance.  The alloy drive pins transfer the load from the brake action while maintaining the axial and radial float between the disc rotor and hat.  The pins are secured by grade12 cap screws with hardened washers and mounted with anti-noise spring washers to allow for heat expansion while eliminating the rattle and noise associated with floating rotors. The 2-piece GiroDisc design allows for rotor only replacement to minimize replacement costs and deliver outstanding performance and cooling. Sold/Priced per pair.

CMS Performance Bolt-In Roll Bar for Porsche 987 HANDS DOWN THE BEST ROLL BAR FOR THE CAYMAN The CMS Performance Roll Bar is the strongest, safest, and most beautifully constructed roll bar on the market for your Porsche 987 Cayman (base, S, GTS, or R). In designing our roll bar, safety and structural rigidity were our primary goals. That's why we use 1.75" x .095" premium Docol R8 Advanced High-Strength Steel tubing, vs. the weaker, more brittle 4130 tubing others use. Click Here for Installation Instructions RENOWNED CMS PERFORMANCE ATTENTION TO DETAIL Our attention to detail puts your harness shoulder straps at the proper angle (0 to -20 ) and distance relative to the driver, regardless of seat position. Our unique design provides an ideal mount for a Smarty Cam video camera. Our use of thicker state-of-the-art Docol tubing throughout allows us to keep the driver's rear view unobstructed by diagonal bracing, giving you unfettered access to the engine cover with the roll bar in place. (Our competitors make you remove part of your roll bar to get at your engine, risking damage to the bar and your interior!) The CMS roll bar's rear kickers bolt to the Cayman's rear shock towers, the safest, strongest mounting points. This allows the roll bar to contribute tremendous rigidity to your chassis and suspension. The main roll hoop is mounted to the frame structure across the rear bulkhead for lighter weight and superior strength. EXCEPTIONAL STRENGTH & UNCOMMON BEAUTY Each CMS roll bar is fully powder coated in your choice of colors custom-matched to Porsche's 987 color palette1, or you can choose from over 6,000 custom colors -- no extra charge. Fully TIG welded by our master welders, using superior materials, and custom powder coated in-house by CMS Coatings. The design, strength, fit, and finish of the CMS roll bar all add up to this: you can spend more on a roll bar, but you only get the best from CMS. CMS PERFORMANCE PORSCHE 987 ROLL BAR DETAILS 1.75" X .095" Docol R8 Advanced High-Strength Steel for superior strength and safety Fully TIG welded for durability, strength, and beauty One-piece main hoop for incredible strength and safety. Full access to your engine without removal of any part of the roll bar Minimal cutting of trim required, for a factory-installed look CNC plasma-cut mounting plates Designed, built, and powder-coated by CMS in the USA CNC machined high-strength steel interlocking clamps to ease installation Allows full seat travel with any seat Straightforward installation and perfect fitment Detailed installation instructions and all necessary hardware included This product is intended for off-road use only. 1 Note: CMS Performance powder coat colors are professionally matched to be as close as possible to factory paint codes. However, color-matching powder is not the same as mixing liquid paint. In a few cases, slight color variance is normal and is not perceptible with the roll bar installed inside the car.

C3 Carbon Porsche GT2 RS Wing End Plates FITS: 991.2 Porsche GT2 RS C3 Carbon GT2 RS 100% carbon fiber rear-wing end plates offer the uncompromising look, fitment, and finish to match the GT2 RS carbon rear wing perfectly. C3 uses 3D laser scanning to make an ultra-precise mold CNC-machined into an aluminum billet for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts. The look and finish are simply glorious. These really are the pieces Porsche should have put on the GT2 RS in the first place. The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. Available in high-gloss or matte/satin clear automotive urethane top coat, or satin black top coat. FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing Available in gloss or matte/satin clear, or satin black top coat OEM-perfect fit Installs in minutes without any modification using original hardware Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Installation Instructions Here Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

GT2 RS Style Wing End Plates for the GT3 RS FITS: 991.1 & 991.2 Porsche GT3 RS C3 Carbon has created a GT2-Style, 100% dry carbon fiber rear-wing end plates that bolt directly to the factory GT3 RS wing! The OEM GT2 RS end plates use a completely different attachment system (adhesive) than the OEM GT3 RS end plates (bolt-on). But we love the look of the GT2 RS wing ends. So we married the two, giving our customers the look of the GT2 RS on their GT3 RS! The C3 Carbon end plates precisely match the uncompromising look, fitment, and finish of the factory Porsche carbon rear wing. They attach in exactly the same way as the OEM GT3RS end plates; no drilling, modifying, etc. required. Just bolt them up and go. C3 starts with 3D laser scanning to make an ultra-precise, CNC-machined aluminum billet mould for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts. The look and finish are truly amazing! The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. Available in either high-gloss or matte/satin automotive urethane clear coat, or satin black automotive coating. FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing Gloss clear, satin clear, or satin black finish available OEM-perfect fit Installs in minutes without any modification using original hardware Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Installation Instructions Here Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

Carbon Fiber Wing End Plates For Porsche GT3 RS FITS: 991.1 and 991.2 Porsche GT3 RS C3 Carbon 100% carbon fiber rear-wing end plates with the look, fitment, and finish that matches your GT3 RS carbon rear wing perfectly. C3 uses 3D laser scanning to make an ultra-precise mold CNC-machined into an aluminum billet for these RS end plates. The result of countless hours of refinement, the fitment is what you expect from OEM Porsche parts. There's no modification, drilling, etc. needed -- the C3 Carbon parts are ready to bolt on. The look, however, is pure carbon fiber! These really are the pieces Porsche should have put on the GT3 RS in the first place. The 2x2 carbon weave matches that of the rear wing to perfection, lining up seamlessly with the wing's weave. The high-gloss automotive urethane top coat is hand-applied and polished to a smooth mirror finish. FEATURES: Autoclaved pre-preg dry carbon fiber 2x2 weave matched to Porsche's factory carbon wing Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Easy bolt-on, no modifications required Installs in minutes without any modification using original hardware Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Installation Instructions Here Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon McLaren MP4-12C & 650S Carbon Fiber Coolant Tank Cover (Smooth) Vehicle Fitment McLaren MP4-12C (2012-2014) McLaren 650S (2015-2016) Refine your McLaren's engine bay with the sleek appearance of the C3 Carbon Smooth Carbon Fiber Coolant Tank Cover. Designed as a direct replacement for the factory coolant tank cover on the McLaren MP4-12C and 650S, this premium dry carbon fiber component delivers an OEM-quality fit while creating a clean, understated motorsport aesthetic. Manufactured from aerospace-grade autoclaved pre-preg dry carbon fiber, this coolant tank cover features the same 3K 2x2 twill weave found on OEM McLaren carbon fiber components for a seamless factory appearance. Available in either a brilliant high-gloss or satin automotive clear coat, it complements both factory and aftermarket carbon fiber trim throughout the engine compartment. Complete the look by pairing this coolant tank cover with other C3 Carbon engine bay components, or choose the complete McLaren Engine Bay Carbon Package for a fully integrated appearance. C3 Carbon McLaren Coolant Tank Cover Features Direct replacement for the factory coolant tank cover Fits 2012-2014 McLaren MP4-12C and 2015-2016 McLaren 650S Smooth surface design for a clean OEM+ appearance Autoclaved pre-preg dry 3K carbon fiber construction OEM-matched 2x2 twill weave Available in high-gloss or satin automotive urethane clear coat Digitally 3D laser scanned for precise OEM fitment Manufactured in CNC-machined billet aluminum molds Lightweight, exceptionally rigid, and built to last Installs using factory mounting locations Why Choose C3 Carbon? C3 Carbon (Competition Carbon Components) specializes in premium dry carbon fiber upgrades engineered specifically for today's exotic and high-performance vehicles. Every component is manufactured using aerospace-grade pre-preg carbon fiber and cured in an autoclave under controlled heat and pressure, producing exceptional strength, low weight, and OEM-level dimensional accuracy. Unlike many aftermarket carbon fiber parts that rely on wet layup construction or fiberglass with a cosmetic carbon overlay, C3 Carbon components are manufactured from true structural dry carbon fiber. The result is a stronger, lighter, and more precisely fitting component with a flawless finish worthy of a McLaren. Every product begins with a digital 3D laser scan of the factory component before being formed in precision CNC-machined billet aluminum molds. A premium UV-resistant automotive urethane clear coat protects the carbon weave from fading or yellowing while maintaining a deep, factory-quality finish for years of ownership.

C3 Carbon McLaren MP4-12C & 650S Carbon Fiber Coolant Tank Cover (Ribbed) Vehicle Fitment McLaren MP4-12C (2012-2014) McLaren 650S (2015-2016) Enhance the appearance of your McLaren's engine bay with the C3 Carbon Ribbed Carbon Fiber Coolant Tank Cover. Designed as a direct replacement for the factory coolant tank cover on the McLaren MP4-12C and 650S, this premium carbon fiber upgrade delivers an OEM-quality fit while adding an unmistakable motorsport-inspired appearance. Manufactured from autoclaved pre-preg dry carbon fiber, this coolant tank cover matches McLaren's factory 3K 2x2 twill weave for a seamless OEM appearance. Available in your choice of a high-gloss or satin automotive clear coat, it offers exceptional durability, UV resistance, and show-quality finish. For enthusiasts looking to completely transform their engine compartment, this component is also available as part of the complete C3 Carbon McLaren Engine Bay Carbon Package. C3 Carbon McLaren Coolant Tank Cover Features Direct replacement for the factory coolant tank cover Fits 2012-2014 McLaren MP4-12C and 2015-2016 McLaren 650S Autoclaved pre-preg dry 3K carbon fiber construction OEM-matched 2x2 twill weave Available in high-gloss or satin automotive urethane clear coat Digitally 3D laser scanned for precise OEM fitment Manufactured in CNC-machined billet aluminum molds Lightweight, extremely rigid, and exceptionally durable Simple installation using factory mounting locations Why Choose C3 Carbon? C3 Carbon (Competition Carbon Components) has earned a reputation for producing some of the highest-quality carbon fiber components available for exotic and high-performance vehicles. Every component is manufactured using aerospace-grade pre-preg dry carbon fiber, then cured under heat and pressure in an autoclave to achieve exceptional strength, reduced weight, and outstanding dimensional accuracy. Unlike many aftermarket carbon fiber products that use wet layup construction or fiberglass with a cosmetic carbon overlay, C3 Carbon components are engineered from true structural dry carbon fiber. The result is a lighter, stronger, and more consistent part with an OEM-quality fit and finish. Each component is created from digitally laser-scanned factory parts and formed in precision CNC-machined billet aluminum molds. The final automotive-grade UV-resistant urethane clear coat helps prevent yellowing while maintaining a deep, rich carbon fiber appearance for years to come.

C3 Carbon Ferrari F12 Carbon Fiber Engine Bay Panels When you open the hood of your F12, you see a beautiful 6.2L Ferrari V12 surrounded by dull-black plastic trim. Replace that trim with C3's autoclaved, pre-impregnated (pre-preg) dry 3k carbon fiber engine bay trim. Fit and finish are as perfect as the factory carbon pieces, bringsing the beauty of carbon fiber to your engine bay. C3 has matched the OEM Ferrari 1x1 weave for an original Ferrari appearance. Easy installation makes this a must-have for any F12 Berlinetta owner. Fits 2013-2014 Ferrari F12 Berlinetta models FEATURES: Autoclaved pre-preg dry 3k carbon fiber with 1x1 weave matched to Ferrari OEM carbon fiber Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs in minutes without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.

C3 Carbon McLaren MP4-12C Carbon Fiber Shift Paddles Vehicle Fitment McLaren MP4-12C (2012-2015) Upgrade your McLaren cockpit with the premium appearance of C3 Carbon Carbon Fiber Shift Paddles. Designed specifically for the McLaren MP4-12C, these beautifully crafted paddle covers add the unmistakable look of dry carbon fiber to one of the most frequently touched areas of your interior. Manufactured from aerospace-grade autoclaved pre-preg dry carbon fiber, each paddle is finished in an OEM-matched 3K twill weave that perfectly complements the factory carbon fiber trim found throughout the MP4-12C. Installation takes just minutes using pre-applied 3M VHB™ automotive tape, providing a secure fit without permanent modification. Whether you're carving through canyon roads or shifting at full throttle on track, these carbon fiber shift paddles add an unmistakable motorsport feel every time you get behind the wheel. C3 Carbon McLaren Shift Paddle Features Designed specifically for the 2012-2015 McLaren MP4-12C OEM-style 3K 2x2 twill weave matches factory McLaren carbon fiber Autoclaved pre-preg dry carbon fiber construction Premium automotive urethane clear coat with hand-polished finish Precision fit with no trimming or modification required Installs in minutes using genuine 3M VHB™ automotive tape Digitally 3D laser scanned for OEM-level fitment Manufactured in CNC-machined billet aluminum molds Lightweight, durable, and UV resistant Why Choose C3 Carbon? C3 Carbon (Competition Carbon Components) manufactures premium dry carbon fiber upgrades for exotic and high-performance vehicles using the same advanced construction methods employed by leading OEM manufacturers. Every component is produced from aerospace-grade pre-preg carbon fiber and cured in an autoclave under high heat and pressure, resulting in exceptional strength, reduced weight, and flawless dimensional accuracy. Unlike wet-lay carbon fiber or fiberglass components with cosmetic carbon overlays, C3 Carbon products are true structural dry carbon fiber. Every part begins with a digital 3D laser scan of the original factory component before being manufactured in precision CNC-machined billet aluminum molds. The result is an OEM-quality fit, superior finish, and long-term durability. Each component is protected with a premium UV-resistant automotive urethane clear coat that preserves the deep carbon weave while resisting fading and yellowing over years of ownership.

C3 Carbon Ferrari F12 Carbon Fiber Rear Spoiler Upgrade your F12's rear end with an autoclaved, pre-impregnated (pre-preg) dry carbon fiber rear spoiler from C3 Carbon. C3 matches the factory 1x1 3K plain weave for an original Ferrari appearance; meticulously hand-laid, C3 Carbon gives you the luxurious look of carbon at a fraction of the Ferrari price. The C3 carbon rear spoiler is fully functional, installs easily, and dramatically upgrades the look of your F12 Berlinetta! FITS Ferrari F12 Berlinetta FEATURES: Autoclaved pre-preg dry carbon fiber with 1x1 3K plain weave matched to Ferrari factory carbon Clear-coated with automotive urethane, hand polished to a mirror finish OEM-perfect fit Installs easily without any modification Digitally 3D laser scanned for guaranteed fitment Autoclave formed in billet aluminum molds at more than 100 psi and 200 degrees Fahrenheit Experience the Difference of C3 Carbon Products Competition Carbon Components (C3 Carbon) has been steadily gaining in popularity amongst today high-performance driving enthusiasts due to several key factors that help C3 Carbon stand out in a market full of sub-par aftermarket offerings. Each C3 Carbon product is manufactured to provide perfect fit and extreme strength while reducing weight, maximizing quality and ensuring years of exceptional finish. We provide all of this for significantly less money than OEM parts. Every product we make uses pre-impregnated dry carbon formed in a CNC-machined billet aluminum mold which is manufactured by laser-scanning the OEM component(s) so you know you ll have a perfect fit, every time. Dry carbon is stronger and lighter than wet carbon, often weighing 1/3 of our competitors products. Our manufacturing methods also produce a smoother surface on each part for more dimensional accuracy; shaving edges, widening mounting holes and flexing pieces to make them fit are a thing of the past. C3 Carbon also applies an automotive urethane clear-coat which is U/V cured for durability and guarantees C3 Carbon parts won't yellow over time. Many of our competitors use wet carbon (which is heavier), and some use fiberglass with a carbon overlay (much heavier, as the carbon fiber has epoxy literally painted onto it). These materials and manufacturing methods produce a poor finish due to air contamination, and because the epoxy isn t applied uniformly throughout the weave. These products are also much weaker than C3 Carbon products. Finally, most competitors use a fiberglass mold, which is far less expensive but cannot maintain the strict tolerances we demand of our own products. In the end, the fit and finish simply cannot stand up to C3 Carbon products.