Brake Pads

Carbotech CT412 C5 Corvette, 1994-2004 Mustang - Cobra, Bullitt, Mach 1 Carbotech CT412 fits the the Chevrolet Camaro, Corvette, Trans-Am, 1994-2004 Mustang - Cobra, Bullitt, Mach 1 are available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT412 G-Loc equivalent: GLC412 Hawk Brake equivalent: HB111_.610 Thickness of backing plate and pad material: .610" Thickness of backing plate and pad material: 15mm Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT412 Fitment: 2004 Ford Mustang Mach 1 2004 Ford Mustang Cobra & SVT, MACH 1 2004 Ford Mustang Cobra 2003 Ford Mustang Mach 1 2003 Ford Mustang Cobra & SVT, MACH 1 2003 Ford Mustang Cobra 2002 Ford Mustang Cobra F5ZZ2001A 2001 Ford Mustang Cobra & Bullitt 2001 Ford Mustang Cobra 2001 Ford Mustang Bullitt 2000 Ford Mustang Cobra & Bullitt 1999 Ford Mustang Cobra & Bullitt 1999 Ford Mustang Cobra 1998 Ford Mustang Cobra 1997 Ford Mustang Cobra 1996 Ford Mustang Cobra 1996 Chevrolet Corvette 1995 Ford Mustang Cobra SVT 1995 Ford Mustang Cobra R 1995 Ford Mustang Cobra 1995 Chevrolet Corvette Heavy Duty Suspension 1995 Chevrolet Corvette except heavy duty suspension 1994 Ford Mustang Cobra 1994 Chevrolet Corvette Heavy Duty Suspension 1994 Chevrolet Corvette except heavy duty suspension 1993 Chevrolet Corvette Heavy Duty Suspension 1993 Chevrolet Corvette except heavy duty suspension 1992 Pontiac Firebird w/Performance Package 1992 Pontiac Firebird Trans Am GTA w/Performance Package 1992 Pontiac Firebird Performance Pkg. 1992 Pontiac Firebird Formula w/Performance Package 1992 Chevrolet Corvette Heavy Duty Suspension 1992 Chevrolet Corvette except heavy duty suspension 1992 Chevrolet Camaro Z28 w/Heavy Duty Brakes 1992 Chevrolet Camaro RS w/Heavy Duty Brakes 1992 Chevrolet Camaro Rear Disc with 1LE Performance Pkg. 1991 Pontiac Firebird w/Performance Package 1991 Pontiac Firebird Trans Am GTA w/Performance Package 1991 Pontiac Firebird Performance Pkg. 1991 Pontiac Firebird Formula w/Performance Package 1991 Chevrolet Corvette Heavy Duty Suspension 1991 Chevrolet Corvette except heavy duty suspension 1991 Chevrolet Camaro Z28 w/Heavy Duty Brakes 1991 Chevrolet Camaro RS w/Heavy Duty Brakes 1991 Chevrolet Camaro Rear Disc with 1LE Performance Pkg. 1990 Pontiac Firebird w/Performance Package 1990 Pontiac Firebird Trans Am GTA w/Performance Package 1990 Pontiac Firebird Performance Pkg. 1990 Pontiac Firebird Formula w/Performance Package 1990 Chevrolet Corvette Heavy Duty Suspension 1990 Chevrolet Corvette except heavy duty suspension 1990 Chevrolet Camaro RS w/Heavy Duty Brakes 1990 Chevrolet Camaro Rear Disc with 1LE Performance Pkg. 1990 Chevrolet Camaro Iroc-Z w/Heavy Duty Brakes 1989 Pontiac Firebird w/Performance Package 1989 Pontiac Firebird Trans Am GTA w/Performance Package 1989 Pontiac Firebird Trans Am GTA SE w/Performance Package 1989 Pontiac Firebird Performance Pkg. 1989 Pontiac Firebird Formula w/Performance Package 1989 Chevrolet Corvette Heavy Duty Suspension 1989 Chevrolet Corvette except heavy duty suspension 1989 Chevrolet Camaro w/Heavy Duty Brakes 1989 Chevrolet Camaro Rear Disc with 1LE Performance Pkg. 1988 Pontiac Firebird w/Performance Package 1988 Pontiac Firebird Performance Pkg. 1988 Chevrolet Corvette Heavy Duty Suspension 1988 Chevrolet Corvette except heavy duty suspension 1988 Chevrolet Camaro w/Heavy Duty Brakes 1988 Chevrolet Camaro Rear Disc - with Performance Pkg. 1987 Chevrolet Camaro Rear Disc - with Performance Pkg. 1986 Chevrolet Camaro Rear Disc - with Performance Pkg. 1985 Chevrolet Camaro Rear Disc - with Performance Pkg.

Performance Friction PFC Brake Pads 7745.XX.16.44 PFC Brakes offers a wide range of sports car applications. Each PFC product is meticulously created to the highest performance and technology expectations. For PFC, we take pride in the accomplishments of the drivers and race teams that run our product. With More Championships than Any Other™, PFC are the best brakes on the market. Known around the globe in the Sports Car market, we know It’s Quicker. PFC is involved with numerous Sports Car events across the globe, including: IMSA Continental Tire Sports car Challenge  Porsche Cup Racing Pirelli World Challenge With over 35 years of friction knowledge, and on-track experience, our process enables us to provide you with the proper friction every time. NO COMPROMISES™ All PFC pad compounds have been thoroughly processed and are “Race Ready”. This means very easy burnishing to bed pads and discs.  PFC 01 COMPOUND The Performance Friction PFC 01 compound is the standard by which all other racing brake pads are judged. The PFC 01 has a very high initial bite and torque, with very little temperature-induced torque rise. At the end of braking, less torque scatter exists for improved modulation and excellent release. With its low-wear characteristics and excellent disc conditioning properties, it's no wonder the PFC 01 compound has won more World and National Championships than any other brake pad on the market! PFC 11 Compound A new-generation sprint and medium distance friction material, giving you the ultimate in control with superior disc conditioning. Developed from PFC 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation. PFC 13 Compound The new generation of ultimate high bite-high friction. Performance Friction's 13 compound has been developed with increased bite, modulation, with superior disc conditioning and release characteristics for exceptional control. Ultra-smooth and great for tracks with high grip or high downforce cars. It is the ultimate combination of high bite and infinite control. Ideal use where high bite in the first third of the stop is desired. 13’s wear is on a par with PFC’s legendary 01 compound and will operate at higher temperatures if called to. 13 has a very high threshold for fade resistance. Out of all the high bite, high torque pads on the market 13 has shown to have one of the lowest taper wear in a properly designed race caliper.   COMMON CALIPER FITMENTS: Manufacturer: Model: Alcon H-Type AP Racing CP4567 CP5040-10/11/12/13S4 CP5100 CP5108 CP6760  

Carbotech CTW7912 Wilwood Powerlight Caliper Brake Pads Fitting many Wilwood Calipers like the 7912 the Carbotech CTW7912 brake pad set is available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, and XP24 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CTW7912 Wilwood Powerlight Caliper Brake Pads Details: Manufacturer: Carbotech Manufacturer Part Number: CTW7912 Most popular track combination: XP10 Front, XP8 Rear Carbotech CTW7912 Wilwood Powerlight Caliper Brake Pads Fitment: Wilwood Powerlight 7912 [img-12190-left-large_default] BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. [img-12190-left-large_default]

Carbotech Dynapro Caliper Brake Pads CTW7812 Fitting many Wilwood Dynapro caliper fitments, the Carbotech CTW7812 brake pad set is available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT7812 Wilwood 12mm Brake Pad Details: Manufacturer: Carbotech Manufacturer Part Number: CTW7812 Most popular track combination: XP10 Front, XP8 Rear G-Loc cross reference: GP7812 Hawk cross reference: HB542_.490 Material thickness of pad of backing plate and pad material: .490" Material thickness of pad of backing plate and pad material: 12mm [img-12169-left-large_default] BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT7812 Brake Pad Fitment: Billet Dynalite - Side Inlet Dynapro Dust-Boot Dynapro Lug Mount Dynapro Lug Mount Dynapro Lug Mount Dynapro Lug Mount Forged DPHA Narrow Dynapro Radial Mount Narrow Dynapro Radial Mount [img-12168-left-large_default]

Pagid 4924 Racing Brake Pads Pads Fit The Following Vehicles: Porsche 991 GT3 [iron brakes] Front 2014-2019 Porsche 991 GT3 RS [iron brakes] 2016-2019 Porsche 991 Turbo [iron brakes] 2013-2019 Porsche 981 & 718 Cayman GT4 2016+ Pagid RSL 29: The Pagid RSL 29 (Yellow) is the world-leading endurance brake pad used by most of the winning teams in motorsport. Although designed primarily for endurance racing, many competitors use this material successfully for sprint and short distance races also. RS29 has also found favor in the growing track day market due to the level of control, good cold performance, long life and low disc wear. Pagid RSL 1: The Pagid RSL 1 has a high ceramic content with superior thermal insulation and higher heat resistance than metallic pad compounds. They feature excellent pad wear under endurance conditions, excellent rotor life, and are less aggressive than RST pads with excellent brake balance and modulation. Pagid RST 1: The Pagid RST 1 is a high average friction, aggressive pad with instant pedal response, quick release, a firm pedal at all temperatures, and a progressive torque curve. Suitable for applications with high down-force and/or very high grip. Pagid RST 3: The Pagid RST 3 is a medium-high friction metal-ceramic compound containing steel fibers and is therefore the perfect complement of the RST product family. It is exceptional in its low heat conductivity. Ideal for rally tarmac and gravel, GT cars, Touring Cars, prototype circuit racing, formula cars and club racing. It has a wide range of applications due to its combination of bite, friction and controllability.

Carbotech Brake Pads How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT787 Fits: Honda Applications from 1999-2014 Honda Accord and other front pads. Carbotech Brake Pads are available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. [img-12121-left-large_default] Carbotech Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. [img-7276-left-large_default] Carbotech CT787 Brake Pads | Honda & Acura Fitment Guide: 1999 ACURA RL NO SUBMODEL (1999, 1999) 1999 ACURA RL NO SUBMODEL ALL (1999, 1999) 1999 ACURA TL NO SUBMODEL ALL (1999, 1999) 2000 ACURA RL NO SUBMODEL (2000, 2000) 2000 ACURA RL NO SUBMODEL ALL (2000, 2000) 2000 ACURA TL NO SUBMODEL ALL (2000, 2000) 2001 ACURA CL NO SUBMODEL ALL (2001, 2001) 2001 ACURA CL TYPE-S ALL (2001, 2001) 2001 ACURA RL NO SUBMODEL (2001, 2001) 2001 ACURA RL NO SUBMODEL ALL (2001, 2001) 2001 ACURA TL NO SUBMODEL ALL (2001, 2001) 2002 ACURA CL 45022S0KA11 (2002, 2002) 2002 ACURA RL NO SUBMODEL (2002, 2002) 2002 ACURA RL NO SUBMODEL ALL (2002, 2002) 2002 ACURA TL NO SUBMODEL ALL (2002, 2002) 2002 ACURA TL TYPE-S ALL (2002, 2002) 2003 ACURA CL 45022S0KA11 (2003, 2003) 2003 ACURA RL NO SUBMODEL (2003, 2003) 2003 ACURA RL NO SUBMODEL ALL (2003, 2003) 2003 ACURA TL NO SUBMODEL ALL (2003, 2003) 2003 ACURA TL TYPE-S ALL (2003, 2003) 2003 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2003, 2003) 2003 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2003, 2003) 2003 HONDA ACCORD SEDAN 6 CYLINDER (2003, 2003) 2004 ACURA RL NO SUBMODEL (2004, 2004) 2004 ACURA RL NO SUBMODEL ALL (2004, 2004) 2004 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2004, 2004) 2004 ACURA TSX NO SUBMODEL (2004, 2004) 2004 ACURA TSX NO SUBMODEL ALL (2004, 2004) 2004 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2004, 2004) 2004 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2004, 2004) 2004 HONDA ACCORD SEDAN 6 CYLINDER (2004, 2004) 2005 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2005, 2005) 2005 ACURA TSX NO SUBMODEL (2005, 2005) 2005 ACURA TSX NO SUBMODEL ALL (2005, 2005) 2005 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2005, 2005) 2005 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2005, 2005) 2005 HONDA ACCORD SEDAN 6 CYLINDER; EXCEPT HYBRID (2005, 2005) 2006 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2006, 2006) 2006 ACURA TSX NO SUBMODEL (2006, 2006) 2006 ACURA TSX NO SUBMODEL ALL (2006, 2006) 2006 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2006, 2006) 2006 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2006, 2006) 2006 HONDA ACCORD HYBRID V6 HYBRID (2006, 2006) 2006 HONDA ACCORD HYBRID, SEDAN 3.0L (2006, 2006) 2006 HONDA ACCORD SEDAN 6 CYLINDER; EXCEPT HYBRID (2006, 2006) 2006 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2006, 2006) 2007 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2007, 2007) 2007 ACURA TSX NO SUBMODEL (2007, 2007) 2007 ACURA TSX NO SUBMODEL ALL (2007, 2007) 2007 HONDA ACCORD COUPE V6 MODELS WITH AUTOMATIC TRANS (2007, 2007) 2007 HONDA ACCORD COUPE V6 MODELS WITH MANUAL TRANS (2007, 2007) 2007 HONDA ACCORD HYBRID V6 HYBRID (2007, 2007) 2007 HONDA ACCORD HYBRID, SEDAN 3.0L (2007, 2007) 2007 HONDA ACCORD SEDAN 6 CYL; EXCEPT HYBRID (2007, 2007) 2007 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2007, 2007) 2008 ACURA TL W/O BREMBO FRONT CALIPERS ALL (2008, 2008) 2008 ACURA TSX NO SUBMODEL (2008, 2008) 2008 ACURA TSX NO SUBMODEL ALL (2008, 2008) 2008 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2008, 2008) 2008 HONDA ACCORD EX, COUPE 2.4L (2008, 2008) 2008 HONDA ACCORD EX, COUPE 3.5L (2008, 2008) 2008 HONDA ACCORD EX, SEDAN 2.4L (2008, 2008) 2008 HONDA ACCORD EX, SEDAN 3.5L (2008, 2008) 2008 HONDA ACCORD SEDAN EX, EX-L (2008, 2008) 2008 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2008, 2008) 2009 ACURA TSX NO SUBMODEL ALL (2009, 2009) 2009 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2009, 2009) 2009 HONDA ACCORD EX, COUPE 2.4L (2009, 2009) 2009 HONDA ACCORD EX, COUPE 3.5L (2009, 2009) 2009 HONDA ACCORD EX, SEDAN 2.4L (2009, 2009) 2009 HONDA ACCORD EX, SEDAN 3.5L (2009, 2009) 2009 HONDA ACCORD SEDAN EX, EX-L (2009, 2009) 2009 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2009, 2009) 2010 ACURA TSX NO SUBMODEL ALL (2010, 2010) 2010 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2010, 2010) 2010 HONDA ACCORD EX, COUPE 2.4L (2010, 2010) 2010 HONDA ACCORD EX, COUPE 3.5L (2010, 2010) 2010 HONDA ACCORD EX, SEDAN 2.4L (2010, 2010) 2010 HONDA ACCORD EX, SEDAN 3.5L (2010, 2010) 2010 HONDA ACCORD SEDAN EX, EX-L (2010, 2010) 2010 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2010, 2010) 2011 ACURA TSX NO SUBMODEL ALL (2011, 2011) 2011 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2011, 2011) 2011 HONDA ACCORD EX, COUPE 2.4L (2011, 2011) 2011 HONDA ACCORD EX, COUPE 3.5L (2011, 2011) 2011 HONDA ACCORD EX, SEDAN 2.4L (2011, 2011) 2011 HONDA ACCORD EX, SEDAN 3.5L (2011, 2011) 2011 HONDA ACCORD SEDAN EX, EX-L (2011, 2011) 2011 HONDA CIVIC SEDAN GX; W/REAR DRUMS (2011, 2011) 2012 ACURA TSX NO SUBMODEL ALL (2012, 2012) 2012 HONDA ACCORD COUPE EX, EX-L 4 CYLINDER OR EX-L V6 (2012, 2012) 2012 HONDA ACCORD EX, COUPE 2.4L (2012, 2012) 2012 HONDA ACCORD EX, COUPE 3.5L (2012, 2012) 2012 HONDA ACCORD EX, SEDAN 2.4L (2012, 2012) 2012 HONDA ACCORD EX, SEDAN 3.5L (2012, 2012) 2012 HONDA ACCORD SEDAN EX, EX-L (2012, 2012) 2013 ACURA TSX NO SUBMODEL ALL (2013, 2013) 2014 ACURA TSX NO SUBMODEL ALL (2014, 2014) [img-12121-left-large_default]

Carbotech Brake Pads Carbotech Brake Pads for 2010-2013 Camaro SS 6.2L & ZL1 Rear. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT1053 Material Thickness (inch): .600" Material Thickness (mm): 15.24mm Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.

Carbotech FRS/BRZ/GT86 w/ standard Front Brake Pad Set Carbotech brake pads for the front of Subaru BRZ, Scion FRS, or Toyota GT86 with the standard calipers (not BBS). AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT929 Brake Compounds Carbotech 1521 The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotech AX6 The AX6 is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6 due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotech XP8 is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech does NOT recommended XP8 as a daily driven street pad due to elevated levels of dust and noise. Carbotech XP8 is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotech unleashed the XP10 to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10 has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10 still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech compounds so successful. Carbotech XP10 is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XP series compound with an excellent initial bite, torque and fade resistance over and above the XP10 compound. XP12 has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12 has that excellent Carbotech release and modulation that has made all other Carbotech compounds so successful. The XP12 is more rotor aggressive than XP10â , but compared to the competition the XP12 is still very rotor friendly. XP12 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP20 The latest iteration of the highly successful XP series of compounds. XP20 is a step up from the highly successful XP16 compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20 is another major step in progression of the highly successful XP series line of compounds from Carbotech . XP20 has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotech XP20 maintains our tradition of having the outstanding release and modulation that has made all other Carbotech compounds so successful. Carbotech XP20 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP24 XP24 is the pinnacle compound of the extremely successful XP Series of compounds engineered by Carbotech . This compound is based on the same fundamentals that exist in all other Carbotech formulations. XP24 has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24 has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotech XP24 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech RP2 The RP2 compound was engineered for endurance racing based on our highly successful XP Series formulations. RP2 has strong initial bite, a little less modulation than our XP12 , but still maintains the rotor friendliness of our XP series compounds. RP2 has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2 is as rotor friendly as our XPâ series compounds. Carbotech RP2 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech 913 Kelated Metallic A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.  

Performance Friction PFC Brake Pads 0394.XX.20.44 PFC Brakes offers a wide range of sports car applications. Each PFC product is meticulously created to the highest performance and technology expectations. For PFC, we take pride in the accomplishments of the drivers and race teams that run our product. With More Championships than Any Other™, PFC are the best brakes on the market. Known around the globe in the Sports Car market, we know It’s Quicker. PFC is involved with numerous Sports Car events across the globe, including: IMSA Continental Tire Sports car Challenge  Porsche Cup Racing Pirelli World Challenge With over 35 years of friction knowledge, and on-track experience, our process enables us to provide you with the proper friction every time. NO COMPROMISES™ All PFC pad compounds have been thoroughly processed and are “Race Ready”. This means very easy burnishing to bed pads and discs.  The PFC 0394.11.16.44 and PFC 0394.08.18.44 have dominated the NASA Spec E46 class since inception. The PFC 0394 pad shape fits the front axle of the E46 non-M, M3 chassis and comes in three popular compounds, the 08, 11 and brand new 332. PFC 0394.11.18.44 Brake Pad 11 Compound A new generation sprint and medium distance friction: the ultimate in control with superior disc conditioning. Developed from 01 compound with improved bite, modulation, and release characteristics. It is ultra smooth and developed to reduce wheel locking at the end of braking while giving more cold and hot bite than the endurance oriented 08 compound. Brake with confidence; brake with ultimate control and modulation. PFC 0394.08.18.44 Brake Pad 08 Compound One of PFC's most popular compounds which came to fame in Endurance Sportscar and GT racing due to its performance in applications where smooth initial bite is a must. PFC08 has a slight friction rise with temperature, excellent release and modulation characteristics. Despite its considerable performance, 08 has the lowest wear rate of all PFC compounds and can easily match the wear characteristics of the other competitors' materials but with much higher bite and consistent performance across a broad temperature range. PFC 0394.331.18.44 Brake Pad 331 Compound 331 is the next generation of PFC endurance material. Improved control with ABS, and gentle on discs. The 331 Carbon Metallic ® compound has been developed with higher initial bite than PFC’s renowned 08 endurance compound. The 331 has improved release, and continues to offer exceptional control and feel. It boasts low wear rate and exceptional disc conditioning. 0394.xx.20.44 FITS: BMW 120d / 130i 2006-12 E81 / E87 BMW M3 incl Evo 1992-99 E36 E36-M3 BMW 330i 2000-06 E46 E46-330i BMW M3 incl CSL 2000-06 E46 E46-M3 BMW 330d / 330i 2008- E92 E92-330i BMW 5 Series 1988-95 E34 incl M5 BMW 5 Series 1995- E39 (not M5) BMW 6 Series 1982-89 E24 BMW Z3 Z3M 1992-99 E36 BMW Z3 3.2 litre 1997- Coupé / Roadster BMW Z4M 2006- E85 M Roadster & Coupé

Carbotech CTBBK Brake Pads for Brembo Gran Turismo 6-Piston Calipers Fitting many Brembo caliper fitments, the Carbotech CTBBK brake pad set is available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, and XP24 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CTBBK Brembo Brake Pad Details: Manufacturer: Carbotech Manufacturer Part Number: CTBBK Most popular track combination: XP10 Front, XP8 Rear Radial Depth: 54mm Total pad height: 73.2mm Material thickness of pad of backing plate and pad material: 16.8mm BRAKE COMPOUNDS Carbotech 1521 The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotech AX6 The AX6 is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6 is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotech XP8 is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech does NOT recommended XP8 as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8 is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP20 The latest iteration of the highly successful XP series of compounds. XP20 is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XP series line of compounds from Carbotech . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotech XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotech compounds so successful. Carbotech XP20 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP24 XP24â is the pinnacle compound of the extremely successful XP Series of compounds engineered by Carbotech . This compound is based on the same fundamentals that exist in all other Carbotech formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24 has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24 is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech RP2 The RP2 compound was engineered for endurance racing based on our highly successful XP Series formulations. RP2 has strong initial bite, a little less modulation than our XP12 , but still maintains the rotor friendliness of our XP series compounds. RP2 has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XP series compounds. Carbotech RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallic A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CTBBK Brake Pad Fitment: Brembo GT 6 Piston

Carbotech CT78772 2020+ Supra (A90) 3.0 Rear Performance Package Brake Pads Carbotech CT78772-RP fits the rear axle of the 2020+ Toyota Supra with the Performance Package. Available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced. Carbotech CT78772 2020 Supra 3.0 (A90) Rear Brake Pads Details: Manufacturer: Carbotech Manufacturer part number: CT78772-RP Fits: Rear of 2020+ Toyota Supra 3.0 with the Performance Package Fits 2020+ Toyota Supra with standard package: No Compounds available: 1521, AX6, XP8, XP10, XP12, XP20, XP24, & RP2 Most popular track combination: XP12 Front, XP10 Rear Carbotech Brake Compounds Carbotech 1521 The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotech AX6 The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP20 The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech XP24 XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech RP2 The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech CT78772 Fitment (Rear) 2020+ Toyota Supra 3.0 (A90) with Performance Package

Carbotech CTCP5070-D54 Brake Pads AP CP9660, CP5555, CP5060 Carbotech CTCP5070-D54 fits the 6 piston AP Racing CP9660, AP Racing CP5060-2/3/4/5ST, AP Racing CP5555, Rotora FC6 and many others with a 54mm annulus. Available in Carbotech 1521, AX6, XP8, XP10 and XP12 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced. How To Properly Bed In Carbotech Racing Brake Pads [img-12179-left-large_default] Carbotech CTCP5070-D54 Brake Pads AP CP9660, CP5555, CP5060 Details: Manufacturer: Carbotech Manufacturer Part Number: CTCP5555-D54 Annulus: 54mm Material thickness of pad material and backing plate: .710" (18mm) Pagid interchange: 1904 Eyelet on the top center of the pad: No, it is removed [img-12179-left-large_default] CARBOTECH BRAKE COMPOUNDS Carbotech 1521 The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotech AX6 The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech CTCP5555 Brake Pads Fitment: AP Racing CP9660 AP Racing CP5060-2/3/4/5ST AP Racing CP5555 Rotora FC6 Alfa RomeoGiulietta TCR18 Front Axle Alfa RomeoGiulietta TCR15 - 17 FordMustang FP350S (race car by FORD Performance) AP brakes18 Front Axle Honda (Acura)Civic TCR [race car]15 - 17 Front Axle MitsubishiLancer Evo X R4 Tarmac Rally07 - 16 Front Axle [img-12179-left-large_default]

Carbotech CT1134 Brake Pads Porsche 997/987/991/981 Rear Brake Pads Carbotech Race and Track Pads CT 1134 is a popular Porsche 997, 991, 981 981 Cayman and Boxster rear pad. Measuring 16mm thick and available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT1134 Most popular track combination: R10 Front, R8 Rear G-Loc cross reference: GP1134 Hawk cross reference: HB665._577 Material thickness of pad of backing plate and pad material: .577" Material thickness of pad of backing plate and pad material: 15mm Carbotech Brake Compounds Carbotech 1521 The Carbotech 1521 is our high performance street compound. The 1521 compound is known for its release and modulation, along with unmatched rotor friendliness. 1521 is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech 1521 operating range starts out at ambient and goes up to 800F (426C+). 1521 is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech 1521 is NOT recommended for ANY track use. Carbotech AX6 The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.

Carbotech Brake Pads Carbotech Race and Track Pads For the rear of 2005 - 2014 Ford Mustang. Measuring a full 17mm thick and available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT1465 Most popular track combination: R10 Front, R8 Rear G-Loc cross reference: GP1465 Hawk cross reference: HB485._656 Material thickness of pad of backing plate and pad material: .656" Material thickness of pad of backing plate and pad material: 17mm [img-12119-left-large_default] Carbotech Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT1465 Brake Pad Fitment: 2005 FORD MUSTANG V6 - 4.0L (2005, 2005) 2005 FORD MUSTANG V8 4.6L (2005, 2005) 2005 FORD MUSTANG V6 (2005, 2005) 2006 FORD MUSTANG V6 - 4.0L (2006, 2006) 2006 FORD MUSTANG V8 4.6L (2006, 2006) 2006 FORD MUSTANG V6 (2006, 2006) 2007 FORD MUSTANG SHELBY GT (2007, 2007) 2007 FORD MUSTANG SHELBY GT500 (2007, 2007) 2007 FORD MUSTANG V6 - 4.0L (2007, 2007) 2007 FORD MUSTANG V8 4.6L (2007, 2007) 2007 FORD MUSTANG SHELBY GT500 5.4L (2007, 2007) 2007 FORD MUSTANG V6 (2007, 2007) 2008 FORD MUSTANG SHELBY GT (2008, 2008) 2008 FORD MUSTANG SHELBY GT500 (2008, 2008) 2008 FORD MUSTANG V6 (2008, 2008) 2008 FORD MUSTANG V8; GT (2008, 2008) 2008 FORD MUSTANG SHELBY GT500 5.4L (2008, 2008) 2008 FORD MUSTANG SHELBY GT500 ALL (2008, 2008) 2008 FORD MUSTANG V6 (2008, 2008) 2009 FORD MUSTANG SHELBY (2009, 2009) 2009 FORD MUSTANG V6 (2009, 2009) 2009 FORD MUSTANG V8; GT (2009, 2009) 2009 FORD MUSTANG SHELBY GT500 5.4L (2009, 2009) 2009 FORD MUSTANG SHELBY GT500 ALL (2009, 2009) 2009 FORD MUSTANG V6 (2009, 2009) 2010 FORD MUSTANG BASE OR GT WITH BREMBO FRONT CALIPERS (2010, 2010) 2010 FORD MUSTANG SHELBY (2010, 2010) 2010 FORD MUSTANG V6 MFG AFTER 3/21/2010 - EXCEPT MODELS WITH BREMBO FRONT CALIPERS (2010, 2010) 2010 FORD MUSTANG V6 MFG UP TO 3/20/2010 (2010, 2010) 2010 FORD MUSTANG V8; GT MFG AFTER 3/21/2010 - EXCEPT MODELS WITH BREMBO FRONT CALIPERS (2010, 2010) 2010 FORD MUSTANG V8; GT MFG UP TO 3/20/2010 (2010, 2010) 2010 FORD MUSTANG SHELBY GT500 ALL (2010, 2010) 2010 FORD MUSTANG V6 (2010, 2010) 2011 FORD MUSTANG BASE OR GT WITH BREMBO FRONT CALIPERS (2011, 2011) 2011 FORD MUSTANG SHELBY (2011, 2011) 2011 FORD MUSTANG V6 MODELS WITHOUT BREMBO FRONT CALIPERS (2011, 2011) 2011 FORD MUSTANG V8; GT MODELS WITHOUT BREMBO FRONT CALIPERS (2011, 2011) 2011 FORD MUSTANG 5.0L PERFORMANCE W/BREMBO BRAKES 5.0L (2011, 2011) 2011 FORD MUSTANG SHELBY GT500 ALL (2011, 2011) 2011 FORD MUSTANG V6 FRONT ROTOR FITS MODELS W/O PERFORMANCE BRAKE PKG 3.7L (2011, 2011) 2012 FORD MUSTANG BASE, GT, OR BOSS 302 WITH BREMBO FRONT CALIPERS (2012, 2012) 2012 FORD MUSTANG V6 MODELS WITHOUT BREMBO FRONT CALIPERS (2012, 2012) 2012 FORD MUSTANG V8; GT MODELS WITHOUT BREMBO FRONT CALIPERS (2012, 2012) 2012 FORD MUSTANG 5.0L PERFORMANCE W/BREMBO BRAKES 5.0L (2012, 2012) 2012 FORD MUSTANG BOSS 302 5.0L (2012, 2012) 2012 FORD MUSTANG GT BREMBO ALL (2012, 2012) 2012 FORD MUSTANG GT STANDARD BRAKES 5.0L (2012, 2012) 2012 FORD MUSTANG V6 FRONT ROTOR FITS MODELS W/O PERFORMANCE BRAKE PKG 3.7L (2012, 2012) 2013 FORD MUSTANG BASE, GT, OR BOSS 302 WITH BREMBO FRONT CALIPERS (2013, 2013) 2013 FORD MUSTANG MODELS WITH STANDARD FRONT CALIPERS AND 316MM (12.45") FRONT ROTORS (2013, 2013) 2013 FORD MUSTANG MODELS WITH STANDARD FRONT CALIPERS AND 336MM (13.23") FRONT ROTORS (2013, 2013) 2013 FORD MUSTANG SHELBY GT500 (2013, 2013) 2013 FORD MUSTANG BOSS 302 5.0L (2013, 2013) 2013 FORD MUSTANG GT PERFORMANCE BRAKES ALL (2013, 2013) 2013 FORD MUSTANG GT STANDARD BRAKES 5.0L (2013, 2013) 2013 FORD MUSTANG V6 FRONT ROTOR FITS MODELS W/O PERFORMANCE BRAKE PKG 3.7L (2013, 2013) 2014 FORD MUSTANG BASE, GT, OR BOSS 302 WITH BREMBO FRONT CALIPERS (2014, 2014) 2014 FORD MUSTANG MODELS WITH STANDARD FRONT CALIPERS AND 316MM (12.45") FRONT ROTORS (2014, 2014) 2014 FORD MUSTANG MODELS WITH STANDARD FRONT CALIPERS AND 336MM (13.23") FRONT ROTORS (2014, 2014) 2014 FORD MUSTANG SHELBY GT500 (2014, 2014) 2014 FORD MUSTANG GT BREMBO TRACK ALL (2014, 2014) 2014 FORD MUSTANG GT BREMBO W/AUTO TRANS ALL (2014, 2014) 2014 FORD MUSTANG GT PERFORMANCE BRAKES ALL (2014, 2014) 2014 FORD MUSTANG GT STANDARD BRAKES 5.0L (2014, 2014) 2014 FORD MUSTANG SHELBY GT500 ALL (2014, 2014) 2014 FORD MUSTANG V6 FRONT ROTOR FITS MODELS W/O PERFORMANCE BRAKE PKG 3.7L (2014, 2014) [img-12119-left-large_default]

Carbotech Brake Pads 1994-2004 Mustang Cobra, Cobra R, Bullitt, Mach 1, Shelby and SVT Rear Carbotech Brake Pads are available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT627 Fits: 1994-2004 Mustang Cobra, Cobra R, Bullitt, Mach 1, Shelby and SVT Cobra. Does NOT fit 1994-2004 Base model Mustang. Those cars take the Carbotech CT627A (with the A in the part number) The Carbotech 627 fits the vented rear rotor cars and each pad is .595" thick including both backing plate and pad material [img-12186-left-large_default] Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. [img-12186-left-large_default]

Carbotech CTPG8062 Brembo Gran Turismo 6-Piston Brake Pads Fitting many Brembo caliper fitments, the Carbotech CTPG8062 brake pad set is available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, and XP24 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CTPG8062 Brembo Brake Pad Details: Manufacturer: Carbotech Manufacturer Part Number: CTPG8062 Most popular track combination: XP10 Front, XP8 Rear Pagid cross reference: 8062 Material thickness of pad of backing plate and pad material: 16.8mm BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CTPG8062 Brake Pad Fitment: Brembo GT 6 Piston