Brakes by Vehicle

Image of Ferodo FCP1561W DS1.11 Nissan 350Z with Brembo Front Brake Pads

Ferodo Ferodo FCP1561W DS1.11 Nissan 350Z with Brembo Front Brake Pads $428.93

Ferodo FCP1561W-N DS1.11 Brake Pad Fitting the front of the Nissan 350Z with the Brembo Track Package, the Ferodo FCP1561W in the DS1.11 compound is a long duration endurance race pad that is also used in the Red Group of advanced track day drivers. Featuring a flat torque curve with an intermediate profile, the Ferodo DS1.11 is repeatable across the entire temperature range, making it a great choice for many track drivers and racers. Ferodo FCP1561W-N DS1.11 Brake Pad Details: Manufacturer: Ferodo Manufacturer part number: FCP1561W-N Use: Heavy Duty Endurance Average Coefficient of Friction: 0.46 Temperature Range (C): 200 - 750 C Temperature Range (F): 392 - 1382 F Ferodo DS1.11 Brake Compound Details: The Ferodo DS1.11 is a long duration endurance pad with an incredible flat torque curve across the workable range of 392 to 1382 . Designed to put you on the podium of your next World Racing League race, the Ferodo DS1.11 is a track only pad that is designed for repeatable stopping performance and feel across a very wide temperature spectrum. The Ferodo DS1.11 brake compound makes the chassis repeatable in every brake zone, lap after lap. The cold friction profile of the Ferodo DS1.11 is predictable and grows linear as your pad heats up with very good fade resistance all the way to its maximum 1382 F limit. Another common use of the Ferodo DS1.11 is an advanced track day driver in the red group in a well set-up chassis with sticky rubber and aero. Ferodo FRP1561W-N DS1.11 Brake Pad Fitment: 2002-2008 Nissan 350Z w/ Brembo Brake Package Front Axle 2003-2006 Nissan Sentra SE-R Spec V Front Axle

Image of Ferodo FCP1348H DS2500 Camaro Z28, ZL1 & 1LE Rear Brake Pads

Ferodo Ferodo FCP1348H DS2500 Camaro Z28, ZL1 & 1LE Rear Brake Pads $289.55

Ferodo FCP1348H-N DS2500 Camaro Z28/ZL1 Rear Brake Pads Fitting the Camaro SS, Z28, ZL1 and 1LE the Ferodo FCP1348H in the DS2500 compound is one of the best street/track pads available. No need to change to track pads and then to street pads every weekend. Now enjoy linear high-torque braking on the best of mountain rides and mild track days. Ferodo FCP1348H-N DS2500 Details: Manufacturer: Ferodo Manufacturer part number: FCP 1348H-N Primary Use: Street & Light Track Application: Touring Car, GT, Single Seat Average Coefficient of Friction: 0.41 Temperature Range C: 0 - 500 C Temperature Range F: 32 - 932 F Ferodo DS2500 Brake Compound Details:The Ferodo DS2500 is the best hybrid street and track day pad available. Designed for driving on the street, mountain runs and light track day with a stable average friction coefficient of 0,41 over a wide working temperature range of 32 to 932 F, (0 to 500 C)Featuring a moderately high initial bite and the solid fade resistance of a trackpad, but with relatively low dust and noise levels of a street pad. When the Ferodo DS2500 is used as a street pad, it can produce some squeal on most vehicle platforms. The most common use of the Ferodo DS2500 is mountain runs, autocross, and some light track duty on street tires in colder temperatures. When used on track on heavy (3,000+ lbs.+) track cars with high horsepower and R Compound tires, the DS2500 pad wear rates tend to be considerably higher vs. Ferodo Racing's other compounds. Do not expect to win the WRL GTU class on Ferodo DS2500 brake pads, but it is the perfect dual purpose street and light track day pad. Ferodo FCP1348H DS2500 Camaro Z28-ZL1 Rear Brake Pad Fitment: 2018 Chevrolet Camaro ZL1 2017 Chevrolet Camaro ZL1 2018 Chevrolet Camaro ZL1-1LE 2016 Chevrolet Camaro ZL1 2015 Chevrolet Camaro Z28 2014 Chevrolet Camaro Z28 2014 Chevrolet Camaro SS V8 2014 Chevrolet Camaro ZL1 2013 Chevrolet Camaro SS V8 2013 Chevrolet Camaro ZL1 2012 Chevrolet Camaro SS V8 2012 Chevrolet Camaro ZL1 2011 Chevrolet Camaro SS V8 2010 Chevrolet Camaro SS V8

Image of Ferodo FCP4611H DS2500 BMW M235i, M2, M3, M4 Front Brake Pads

Ferodo Ferodo FCP4611H DS2500 BMW M235i, M2, M3, M4 Front Brake Pads $318.40

Ferodo FCP4611H DS2500 Brake Pad Set BMW Fitment Fitting many BMW M235, M3 and M4 front calipers, the Ferodo FCP 4611H in the DS2500 compound fis one of the best street/track pads available. No need to change to track pads and then to street pads every weekend. Now enjoy linear high-torque braking on the best of mountain rides and mild track days. Ferodo FCP4611H DS2500 Brake Pad Set Details: Manufacturer: Ferodo Manufacturer part number: FCP-FCP4611H Primary Use: Street & Light Track Application: Touring Car, GT, Single Seat Average Coefficient of Friction: 0.41 Temperature Range C: 0 - 500 C Temperature Rance F: 32 - 932 F Ferodo DS2500 Brake Compound Details:The Ferodo DS2500 is the best hybrid street and track day pad available. Designed for driving on the street, mountain runs and light track day with a stable average friction coefficient of 0,41 over a wide working temperature range of 32 to 932 F, (0 to 500 C)Featuring a moderately high initial bite and the solid fade resistance of a trackpad, but with relatively low dust and noise levels of a street pad. When the Ferodo DS2500 is used as a street pad, it can produce some squeal on most vehicle platforms. The most common use of the Ferodo DS2500 is mountain runs, autocross, and some light track duty on street tires in colder temperatures.When used on track on heavy (3,000+ lbs.+) track cars with high horsepower and R Compound tires, the DS2500 pad wear rates tend to be considerably higher vs. Ferodo Racing's other compounds. Do not expect to win the WRL GTU class on Ferodo DS2500 brake pads, but it is the perfect dual purpose street and light track day pad. Ferodo FCP4611H DS2500 Cross Referance: Pagid: U4931 Ferodo FCP4611H DS2500 Front Axle Fitment: 2015 BMW M3 F80 Iron Discs 2015 BMW M4 F82 Iron Discs 2014 BMW M3 F80 Iron Discs 2014 BMW M4 F82 Iron Discs 2016 BMW M235i F22 All 2015 BMW M235i F22 All 2016 BMW M3 F80 Iron Discs 2016 BMW M4 F82 Iron Discs 2016 BMW M2 F87 All 2017 BMW M2 F87 All 2017 BMW M3 F80 Iron Discs 2017 BMW M4 F82 Iron Discs 2018 BMW M2 F87 All 2018 BMW M3 F80 Iron Discs 2018 BMW M4 F82 Iron Discs 2019 BMW M3 F80 Iron Discs 2020 BMW M3 F80 Iron Discs 2019 BMW M4 F82 Iron Discs 2020 BMW M4 F82 Iron Discs 2014 BMW M235i F22 All 2017 BMW M240i F22 All 2018 BMW M240i F22 All 2019 BMW M240i F22 All 2020 BMW M240i F22 All 2021 BMW M240i Coupe (F22) All

Image of Ferodo FCP4611W DS1.11 BMW M235i, M3 F80, M4 F82 Front Brake Pads

Ferodo Ferodo FCP4611W DS1.11 BMW M235i, M3 F80, M4 F82 Front Brake Pads $427.12

Ferodo FCP4611W DS1.11 Brake Pads Fitting many BMW M235, M3 F80, and M4 F82 calipers, the Ferodo FCP 4611W in the DS1.11 compound is a long duration endurance race pad that is also used in the Red Group of advanced track day drivers. Featuring a flat torque curve with an intermediate profile, the Ferodo DS1.11 is repeatable across the entire temperature range, making it a great choice for many track drivers and racers. Ferodo FCP4611W DS1.11 Brake Pad Set Details: Manufacturer: Ferodo Manufacturer part number: FCP 4611W-N Primary Use: Heavy Duty Endurance Application: All vehicle types Average Coefficient of Friction: 0.46 Temperature Range C: 200 - 750 C Temperature Rance F: 392 - 1382 F Thickness: .709" Thickness: 18mm Ferodo DS1.11 Brake Compound Details:The Ferodo DS1.11 is a long duration endurance pad with an incredible flat torque curve across the workable range of 392 to 1382 . Designed to put you on the podium of your next World Racing League race, the Ferodo DS1.11 is a track only pad that is designed for repeatable stopping performance and feel across a very wide temperature spectrum. The Ferodo DS1.11 brake compound makes the chassis repeatable in every brake zone, lap after lap. The cold friction profile of the Ferodo DS1.11 is predictable and grows linear as your pad heats up with very good fade resistance all the way to its maximum 1382 F limit. Another common use of the Ferodo DS1.11 is an advanced track day driver in the red group in a well set-up chassis with sticky rubber and aero. Ferodo FCP4611W DS1.11 Cross Referance: Pagid: U4931 Ferodo FCP4611W DS1.11 Front Axle Fitment: Alpina B3[E90/E92] 2007 - 2011 BMW M135i [F20 & F21] 2011 BMW M235i [F22] 2013 BMW M3 [F80] 2014 BMW M4 [F82] 2014

Image of Ferodo FCP1562W DS1.11 Nissan 350Z & Subaru WRX STI Brembo Rear Brake Pads

Ferodo Ferodo FCP1562W DS1.11 Nissan 350Z & Subaru WRX STI Brembo Rear Brake Pads $335.22

Ferodo FCP1562W DS1.11 Compound Fitting the rear of the Nissan 350Z, Subaru WRX STI, and Mitsubishi Lancer Evolution Evo VII-IX with the Brembo Brake Package, the Ferodo FCP1562W in the DS1.11 compound is a long duration endurance race pad that is also used in the Red Group of advanced track day drivers. Featuring a flat torque curve with an intermediate profile, the Ferodo DS1.11 is repeatable across the entire temperature range, making it a great choice for many track drivers and racers. Ferodo FCP1562W DS1.11 Details: Manufacturer: Ferodo Manufacturer part number: FCP 1562W-N Primary Use: Heavy Duty Endurance Application: All vehicle types Average Coefficient of Friction: 0.46µ Temperature Range C: 200 - 750 C Temperature Range F: 392 - 1382 F Ferodo DS1.11 Brake Compound Details:The Ferodo DS1.11 is a long duration endurance pad with an incredible flat torque curve across the workable range of 392 to 1382 . Designed to put you on the podium of your next World Racing League race, the Ferodo DS1.11 is a track only pad that is designed for repeatable stopping performance and feel across a very wide temperature spectrum. The Ferodo DS1.11 brake compound makes the chassis repeatable in every brake zone, lap after lap. The cold friction profile of the Ferodo DS1.11 is predictable and grows linear as your pad heats up with very good fade resistance all the way to its maximum 1382 F limit. Another common use of the Ferodo DS1.11 is an advanced track day driver in the red group in a well set-up chassis with sticky rubber and aero. Ferodo FCP1562W Rear Axle Fitment: 2003 Mitsubishi Lancer Evolution Evo VII-IX 2004 Mitsubishi Lancer Evolution Evo VII-IX 2005 Mitsubishi Lancer Evolution Evo VII-IX 2006 Mitsubishi Lancer Evolution Evo VII-IX 2002 Nissan 350Z Brembo Brakes 2003 Nissan 350Z Brembo Brakes 2004 Nissan 350Z Brembo Brakes 2005 Nissan 350Z Brembo Brakes 2006 Nissan 350Z Brembo Brakes 2007 Nissan 350Z Brembo Brakes 2008 Nissan 350Z Brembo Brakes 2003 Subaru Impreza WRX STI All 2004 Subaru Impreza WRX STI All 2005 Subaru Impreza WRX STI All 2006 Subaru Impreza WRX STI All 2007 Subaru Impreza WRX STI All 2008 Subaru Impreza WRX STI All 2009 Subaru Impreza WRX STI All 2010 Subaru Impreza WRX STI All 2011 Subaru Impreza WRX STI All 2012 Subaru Impreza WRX STI All 2013 Subaru Impreza WRX STI All 2015 Subaru Impreza WRX STI All 2017 Subaru Impreza WRX STI All 2016 Subaru Impreza WRX STI All 9999 AP Racing CP5316 D50 9999 AP Racing CP5317 D50 Ferodo FRP1562W Cross Reference: Carbotech: CT960 G-Loc: GP960 Hawk Brake: HB545_.564 We believe the above information is correct, but have not checked every brand fitment. Please verify the above part numbers before purchase.

Carbotech Brakes Carbotech CT1440 Brake Pads Lexus Brembo Caliper from $323.00

Carbotech CT1440 Brake Pads Lexus Brembo Caliper Carbotech CT1440 fits many versions of the 2010+ Lexus LS460 with Brembo Sport Package. Available in Carbotech 1521, AX6, XP8, XP10 and XP12 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced. How To Properly Bed In Carbotech Racing Brake Pads [img-12215-left-large_default] Carbotech CT1440 Brake Pads Lexus Brembo Caliper Details: Manufacturer: Carbotech Manufacturer Part Number: CT1440 Material thickness of pad material and backing plate: .654" (17mm) [img-12215-left-large_default] CARBOTECH BRAKE COMPOUNDS Carbotech 1521 The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotech AX6 The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech CT1440 Brake Pads Lexus Brembo Caliper Brake Pads Fitment: 07-17 Lexus LS460 w/ Brembo Sport Package 07-17 Lexus LS460 L w/ Brembo Sport Package 07-17 Lexus LS600h w/ Brembo Sport Package 07-17 Lexus LS600h L w/ Brembo Sport Package [img-12588-left-large_default]

Carbotech Brakes Carbotech CT1977 Brake Pads - 16-17 Focus RS from $212.00

Carbotech CT1977 Brake Pads Carbotech CT1977 fits the front Ford Focus RS applications and is available in Carbotech 1521, AX6, XP8, XP10 and XP12 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT1977 Brake Pads Details: Manufacturer: Carbotech Manufacturer Part Number: CT1977 Material thickness of pad material and backing plate: .550" (14mm) FMSI Number: D1977 Hawk interchange: HB889_.550 CARBOTECH BRAKE COMPOUNDS Carbotech 1521 The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotech AX6 The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech CT1977 Brake Pads Fitment: 2016 Ford Focus RS Front 2017 Ford Focus RS Front

Image of Ferodo FRP3097H DS2500 AP CP8350, Wilwood Superlight 4 & Superlight 6 Brake Pads

Ferodo Ferodo FRP3097H DS2500 AP CP8350, Wilwood Superlight 4 & Superlight 6 Brake Pads $237.88

Ferodo FRP3097H-N DS2500 Compound Fitting the AP CP8350, Wilwood Superlight 4 & Superlight 6 calipers the Ferodo FRP3097H in the DS2500 compound is one of the best street/track pads available. No need to change to track pads and then to street pads every weekend. Now enjoy linear high-torque braking on the best of mountain rides and mild track days Ferodo FRP3097H-N Details: Manufacturer: Ferodo Manufacturer part number: FRP3097H-N Pads in box: 4 Primary Use: Street Performance & Light Track Application: All vehicle types Average Coefficient of Friction: 0.41µ Temperature Range C: 0 - 500 C Temperature Range F: 32 - 932 F Ferodo DS2500 Brake Compound Details:The Ferodo DS2500 is the best hybrid street and track day pad available. Designed for driving on the street, mountain runs and light track day with a stable average friction coefficient of 0,41 over a wide working temperature range of 32 to 932 F, (0 to 500 C)Featuring a moderately high initial bite and the solid fade resistance of a trackpad, but with relatively low dust and noise levels of a street pad. When the Ferodo DS2500 is used as a street pad, it can produce some squeal on most vehicle platforms. The most common use of the Ferodo DS2500 is mountain runs, autocross, and some light track duty on street tires in colder temperatures.When used on track on heavy (3,000+ lbs.+) track cars with high horsepower and R Compound tires, the DS2500 pad wear rates tend to be considerably higher vs. Ferodo Racing's other compounds. Do not expect to win the WRL GTU class on Ferodo DS2500 brake pads, but it is the perfect dual purpose street and light track day pad. Ferodo FRP3097H-N Fitment: AP Racing CP8350 D42 Wilwood Superlite 4 Bridgebolt D42 Wilwood Superlite 6 D42

Carbotech Brakes Carbotech CT1091 Acura Front Caliper Brake Pads from $244.00

Carbotech CT1091 Acura Front Caliper Brake Pads Fitting many Acura Calipers, the Carbotech CT1091 brake pad set is available in Carbotech 1521, AX6, XP8, XP10, XP12, XP20, and XP24 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT1091 Acura Front Caliper Brake Pads Details: Manufacturer: Carbotech Manufacturer Part Number: CT1091 Most popular track combination: XP10 Front, XP8 Rear Carbotech CT1091 Acura Front Caliper Brake Pads Fitment: Acura RL Front [img-12191-left-large_default] BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. [img-12191-left-large_default]

Carbotech Brakes Carbotech CT1779 Brake Pads - VW GTI Mk7 from $236.00

Carbotech CT1779 Brake Pads Fitting many VW and Audi track cars the Carbotech CT1779 brake pad set is available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT1779 Brake Pads Details: Manufacturer: Carbotech Manufacturer Part Number: CT1779 Most popular track combination: XP10 Front, XP8 Rear G-Loc cross reference: GP1779 Hawk cross reference: HB836_.651 Material thickness of pad of backing plate and pad material: .836" Material thickness of pad of backing plate and pad material: 16.5mm BRAKE COMPOUNDS Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. Carbotech CT1779 Brake Pad Fitment: 2015 VOLKSWAGEN GOLF FRONT: OE TO 09/21/2014 OE FROM 5QD698151 SAME FMSI (2015) 2015 VOLKSWAGEN GOLF SPORTWAGEN NO SUBMODEL (2015) 2015 VOLKSWAGEN GTI FRONT TO 06/30/2014 - AFTER 5QD698151 (2015) 2015 VOLKSWAGEN PASSAT NO SUBMODEL (2015) 2016 AUDI Q3 NO SUBMODEL (2016) 2016 AUDI Q3 QUATTRO NO SUBMODEL (2016) 2016 VOLKSWAGEN GOLF NO SUBMODEL (2016) 2016 VOLKSWAGEN GOLF SPORTWAGEN NO SUBMODEL (2016) 2016 VOLKSWAGEN GTI NO SUBMODEL (2016) 2016 VOLKSWAGEN PASSAT NO SUBMODEL (2016) 2017 AUDI Q3 NO SUBMODEL (2017) 2017 AUDI Q3 QUATTRO NO SUBMODEL (2017) 2017 VOLKSWAGEN ALLTRACK NO SUBMODEL (2017) 2017 VOLKSWAGEN GOLF NO SUBMODEL (2017)

Carbotech Brakes Carbotech CT558 BMW Brake Pad Set from $176.00

Carbotech CT558 Brake Pads BMW Calipers Fitting many BMW 3 series cars from 1992-2005 the Carbotech CT558 brake pad set is available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT558 BMW Brake Pad Set Details: Manufacturer: Carbotech Manufacturer part number: CT558 Most popular track combination: XP10 Front, XP8 Rear G-Loc cross reference: GP558 Hawk cross reference: HB136._690 Material thickness of pad of backing plate and pad material: .690" Material thickness of pad of backing plate and pad material: 18mm [img-12161-left-large_default] Carbotech Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. [img-12161-left-large_default] Carbotech CT1465 Brake Pad Fitment: 1992 BMW 318 SERIES E36 (5 LUG) #N/A (1992) 1992 BMW 318I E36 (5 LUG) (1992) 1992 BMW 318I NO SUBMODEL ALL (1992) 1992 BMW 318IS E36 (5 LUG) (1992) 1992 BMW 318IS NO SUBMODEL ALL (1992) 1992 BMW 325 SERIES E36 MODELS #N/A (1992) 1992 BMW 325I E36 MODELS (1992) 1992 BMW 325I E36 ALL (1992) 1992 BMW 325IS E36 MODELS (1992) 1992 BMW 325IS NO SUBMODEL ALL (1992) 1993 BMW 316I NO SUBMODEL #N/A (1993) 1993 BMW 318 SERIES E36 318I, 318IS #N/A (1993) 1993 BMW 318I E36 318I, 318IS (1993) 1993 BMW 318I NO SUBMODEL ALL (1993) 1993 BMW 318IS E36 318I, 318IS (1993) 1993 BMW 318IS NO SUBMODEL ALL (1993) 1993 BMW 325 SERIES NO SUBMODEL #N/A (1993) 1993 BMW 325I E36 ALL (1993) 1993 BMW 325I NO SUBMODEL (1993) 1993 BMW 325IS NO SUBMODEL (1993) 1993 BMW 325IS NO SUBMODEL ALL (1993) 1994 BMW 316I NO SUBMODEL #N/A (1994) 1994 BMW 318 SERIES E36 318I, 318IS #N/A (1994) 1994 BMW 318I E36 318I, 318IS (1994) 1994 BMW 318I NO SUBMODEL ALL (1994) 1994 BMW 318IS E36 318I, 318IS (1994) 1994 BMW 318IS NO SUBMODEL ALL (1994) 1994 BMW 325 SERIES NO SUBMODEL #N/A (1994) 1994 BMW 325I E36 ALL (1994) 1994 BMW 325I NO SUBMODEL (1994) 1994 BMW 325IS NO SUBMODEL (1994) 1994 BMW 325IS NO SUBMODEL ALL (1994) 1995 BMW 316I NO SUBMODEL #N/A (1995) 1995 BMW 318 SERIES 318TI #N/A (1995) 1995 BMW 318 SERIES E36 318I, 318IS #N/A (1995) 1995 BMW 318I E36 318I, 318IS (1995) 1995 BMW 318I NO SUBMODEL ALL (1995) 1995 BMW 318IS E36 318I, 318IS (1995) 1995 BMW 318IS NO SUBMODEL ALL (1995) 1995 BMW 318TI 318TI (1995) 1995 BMW 318TI NO SUBMODEL ALL (1995) 1995 BMW 325 SERIES NO SUBMODEL #N/A (1995) 1995 BMW 325I E36 ALL (1995) 1995 BMW 325I NO SUBMODEL (1995) 1995 BMW 325IS NO SUBMODEL (1995) 1995 BMW 325IS NO SUBMODEL ALL (1995) 1996 BMW 316I NO SUBMODEL #N/A (1996) 1996 BMW 318 SERIES 318TI #N/A (1996) 1996 BMW 318 SERIES E36 318I, 318IS #N/A (1996) 1996 BMW 318I E36 318I, 318IS (1996) 1996 BMW 318I NO SUBMODEL ALL (1996) 1996 BMW 318IS E36 318I, 318IS (1996) 1996 BMW 318IS NO SUBMODEL ALL (1996) 1996 BMW 318TI 318TI (1996) 1996 BMW 318TI NO SUBMODEL ALL (1996) 1996 BMW 325I E36 ALL (1996) 1996 BMW 328 SERIES CONVERTIBLE - VENTED REAR DISC #N/A (1996) 1996 BMW 328 SERIES SEDAN/COUPE - SOLID REAR DISC #N/A (1996) 1996 BMW 328I CONVERTIBLE - VENTED REAR DISC (1996) 1996 BMW 328I SEDAN/COUPE - SOLID REAR DISC (1996) 1996 BMW 328IS CONVERTIBLE - VENTED REAR DISC (1996) 1996 BMW 328IS SEDAN/COUPE - SOLID REAR DISC (1996) 1996 BMW Z3 4 CYLINDER (1996) 1996 BMW Z3 6 CYLINDER (1996) 1996 BMW Z3 ROADSTER ALL (1996) 1997 BMW 318 SERIES 318TI #N/A (1997) 1997 BMW 318 SERIES E36 318I, 318IS #N/A (1997) 1997 BMW 318I E36 318I, 318IS (1997) 1997 BMW 318I NO SUBMODEL ALL (1997) 1997 BMW 318IS E36 318I, 318IS (1997) 1997 BMW 318IS NO SUBMODEL ALL (1997) 1997 BMW 318TI 318TI (1997) 1997 BMW 318TI NO SUBMODEL ALL (1997) 1997 BMW 328 SERIES 328CI CONVERTIBLE E36 #N/A (1997) 1997 BMW 328 SERIES SEDAN & COUPE E36 #N/A (1997) 1997 BMW 328I SEDAN & COUPE E36 (1997) 1997 BMW 328IS SEDAN & COUPE E36 (1997) 1997 BMW Z3 4 CYLINDER (1997) 1997 BMW Z3 6 CYLINDER (1997) 1997 BMW Z3 ROADSTER ALL (1997) 1998 BMW 318 SERIES 318TI #N/A (1998) 1998 BMW 318 SERIES E36 318I, 318IS #N/A (1998) 1998 BMW 318I E36 318I, 318IS (1998) 1998 BMW 318I NO SUBMODEL ALL (1998) 1998 BMW 318TI 318TI (1998) 1998 BMW 318TI NO SUBMODEL ALL (1998) 1998 BMW 323 SERIES 323I E36 CONVERTIBLE - VENTED REAR ROTORS #N/A (1998) 1998 BMW 323 SERIES 323IS E36 COUPE - SOLID REAR ROTORS #N/A (1998) 1998 BMW 323I 323I E36 CONVERTIBLE - VENTED REAR ROTORS (1998) 1998 BMW 323IS 323IS E36 COUPE - SOLID REAR ROTORS (1998) 1998 BMW 328 SERIES 328CI CONVERTIBLE E36 #N/A (1998) 1998 BMW 328 SERIES SEDAN & COUPE E36 #N/A (1998) 1998 BMW 328I SEDAN & COUPE E36 (1998) 1998 BMW 328IC NO SUBMODEL ALL (1998) 1998 BMW 328IS SEDAN & COUPE E36 (1998) 1998 BMW 328IS NO SUBMODEL ALL (1998) 1998 BMW Z3 4 CYLINDER (1998) 1998 BMW Z3 6 CYLINDER EXC. M SERIES (1998) 1998 BMW Z3 ROADSTER ALL (1998) 1999 BMW 318 SERIES 318TI #N/A (1999) 1999 BMW 318TI 318TI (1999) 1999 BMW 318TI NO SUBMODEL ALL (1999) 1999 BMW 323 SERIES 323I - E36 CONVERTIBLE #N/A (1999) 1999 BMW 323 SERIES 323I - E46 SEDAN, COUPE #N/A (1999) 1999 BMW 323 SERIES 323I, 323IS - E36 SEDAN, COUPE #N/A (1999) 1999 BMW 323I 323I - E36 CONVERTIBLE (1999) 1999 BMW 323I 323I - E46 SEDAN, COUPE (1999) 1999 BMW 323I 323I, 323IS - E36 SEDAN, COUPE (1999) 1999 BMW 323IS 323I, 323IS - E36 SEDAN, COUPE (1999) 1999 BMW 328 SERIES E36 328CI CONVERTIBLE #N/A (1999) 1999 BMW 328 SERIES E36 328I COUPE/SEDAN #N/A (1999) 1999 BMW 328 SERIES E46 SEDAN #N/A (1999) 1999 BMW 328I E36 328I COUPE/SEDAN (1999) 1999 BMW 328I E46 SEDAN (1999) 1999 BMW 328IC NO SUBMODEL ALL (1999) 1999 BMW 328IS E46 SEDAN (1999) 1999 BMW 328IS NO SUBMODEL ALL (1999) 1999 BMW Z3 EXCEPT M SERIES (1999) 1999 BMW Z3 ROADSTER ALL (1999) 2000 BMW 323 SERIES 323I - E46 WAGON #N/A (2000) 2000 BMW 323 SERIES 323I, 323CI - E46 SEDAN, COUPE, CONVERTIBLE #N/A (2000) 2000 BMW 323CI 323I, 323CI - E46 SEDAN, COUPE, CONVERTIBLE (2000) 2000 BMW 323I 323I - E46 WAGON (2000) 2000 BMW 323I 323I, 323CI - E46 SEDAN, COUPE, CONVERTIBLE (2000) 2000 BMW 328 SERIES E46 SEDAN #N/A (2000) 2000 BMW 328CI E46 SEDAN (2000) 2000 BMW 328CI NO SUBMODEL 2.8L (2000) 2000 BMW 328I E46 SEDAN (2000) 2000 BMW Z3 EXCEPT M SERIES (2000) 2001 BMW 325 SERIES 325I; 325CI RWD (E46) #N/A (2001) 2001 BMW 325 SERIES 325XI AWD ONLY (E46) #N/A (2001) 2001 BMW 325CI 325I; 325CI RWD (E46) (2001) 2001 BMW 325CI NO SUBMODEL ALL (2001) 2001 BMW 325I 325I; 325CI RWD (E46) (2001) 2001 BMW 325I SPORT WAGON ALL (2001) 2001 BMW 325XI 325XI AWD ONLY (E46) (2001) 2001 BMW 325XI NO SUBMODEL ALL (2001) 2001 BMW 325XI SPORT WAGON ALL (2001) 2001 BMW Z3 2.5L (2001) 2001 BMW Z3 3.0L (2001) 2002 BMW 325 SERIES 325I; 325CI RWD (E46) #N/A (2002) 2002 BMW 325 SERIES 325XI AWD ONLY (E46) #N/A (2002) 2002 BMW 325CI 325I; 325CI RWD (E46) (2002) 2002 BMW 325CI NO SUBMODEL ALL (2002) 2002 BMW 325I 325I; 325CI RWD (E46) (2002) 2002 BMW 325I SPORT WAGON ALL (2002) 2002 BMW 325XI 325XI AWD ONLY (E46) (2002) 2002 BMW 325XI NO SUBMODEL ALL (2002) 2002 BMW 325XI SPORT WAGON ALL (2002) 2002 BMW Z3 2.5L (2002) 2002 BMW Z3 3.0L (2002) 2003 BMW 325 SERIES 325I; 325CI RWD (E46) #N/A (2003) 2003 BMW 325 SERIES 325XI AWD ONLY (E46) #N/A (2003) 2003 BMW 325CI 325I; 325CI RWD (E46) (2003) 2003 BMW 325CI NO SUBMODEL ALL (2003) 2003 BMW 325I 325I; 325CI RWD (E46) (2003) 2003 BMW 325I SPORT WAGON ALL (2003) 2003 BMW 325XI 325XI AWD ONLY (E46) (2003) 2003 BMW 325XI NO SUBMODEL ALL (2003) 2003 BMW 325XI SPORT WAGON ALL (2003) 2003 BMW Z4 2.5I (2003) 2003 BMW Z4 3.0I (2003) 2004 BMW 325 SERIES 325I; 325CI RWD (E46) #N/A (2004) 2004 BMW 325 SERIES 325XI AWD ONLY (E46) #N/A (2004) 2004 BMW 325CI 325I; 325CI RWD (E46) (2004) 2004 BMW 325CI NO SUBMODEL ALL (2004) 2004 BMW 325I 325I; 325CI RWD (E46) (2004) 2004 BMW 325XI 325XI AWD ONLY (E46) (2004) 2004 BMW 325XI NO SUBMODEL ALL (2004) 2004 BMW Z4 2.5I (2004) 2004 BMW Z4 3.0I (2004) 2005 BMW 325 SERIES 325I; 325CI RWD (E46) #N/A (2005) 2005 BMW 325 SERIES 325XI AWD ONLY (E46) #N/A (2005) 2005 BMW 325CI 325I; 325CI RWD (E46) (2005) 2005 BMW 325CI NO SUBMODEL ALL (2005) 2005 BMW 325I 325I; 325CI RWD (E46) (2005) 2005 BMW 325XI 325XI AWD ONLY (E46) (2005) 2005 BMW 325XI NO SUBMODEL ALL (2005) 2005 BMW Z4 2.5I (2005) 2005 BMW Z4 3.0I (2005) 2006 BMW 325 SERIES CI COUPE & CONVERTIBLE (E46) #N/A (2006) 2006 BMW 325CI CI COUPE & CONVERTIBLE (E46) (2006) 2006 BMW 325CI NO SUBMODEL ALL (2006) 2006 BMW Z4 3.0I (2006) 2007 BMW 325CI NO SUBMODEL ALL (2007) 2007 BMW Z4 3.0I (2007) 2008 BMW Z4 3.0I (2008) [img-12161-left-large_default]

Image of Ferodo FRP219Z DSUNO AP Racing CP5100 Caliper Brake Pad Set

Ferodo Ferodo FRP219Z DSUNO AP Racing CP5100 Caliper Brake Pad Set $410.17

Ferodo FRP219Z DSUNO AP Racing CP5100 Caliper Fitment Fitting the AP Racing CP5100 D44 caliper, the Ferodo FRP219Z in the in the DSUNO compound is a medium torque, endurance brake pad. From the working temperature of 392 F to 1382 F, the Ferodo DSUNO features a predictable torque curve with an average friction coefficient of 0.48µ. With a wide temperature range and level torque curve, the Ferodo DSUNO is a popular mid-distance endurance race and track day pad. Ferodo FRP219Z DSUNO Details: Manufacturer: Ferodo Manufacturer part number: FRP219Z-N Compound: DSUNO Primary Use: Mid range endurance 6~ hours, track days Street use: No Track only: Yes Application: All vehicle types Average Coefficient of Friction: 0.48µ Temperature Range C: 200 - 750 C Temperature Range F: 392 - 1382 F Compatible with ceramic discs: No Compatible with iron discs: Yes Ferodo DSUNO Brake Compound Details:The Ferodo DSUNO is a predictable mid-endurance compound designed for repeatable stopping, lap after lap. Featuring one of the flattest torque curves of the Ferodo brake pad line, the Ferodo DSUNO is a mid-distance endurance compound with an average coefficient of friction of 0.48µ across the workable range of 392 to 1382 F. The cold friction profile of the Ferodo DSUNO is low, proper bedding and warm-up is recommended for optimum performance all the way to its maximum 1382 F limit. The Ferodo DSUNO is a popular choice in brake pads for many track drivers and endurance racers. Ferodo FRP219Z DSUNO Cross Referance: AP Racing: CP5100D54 Pagid: 1904 Ferodo FRP219Z DSUNO Fitment: AP Racing CP5100 D44

Image of Ferodo FRP3083H DS2500 McLaren 540C, 600LT, 650S, & Select AP Caliper Brake Pads

Ferodo Ferodo FRP3083H DS2500 McLaren 540C, 600LT, 650S, & Select AP Caliper Brake Pads $228.84

Ferodo FRP3083H DS2500 Compound Fitting the McLaren 540C, 600LT, 650S, and Select AP Calipers, the Ferodo FRP3083H in the DS2500 compound is one of the best street/track pads available. No need to change to track pads and then to street pads every weekend. Now enjoy linear high-torque braking on the best of mountain rides and mild track days.Ferodo FRP3083H Details: Manufacturer: Ferodo Manufacturer part number: FRP3083 Primary Use: Street Performance & Light Track Application: All vehicle types Average Coefficient of Friction: 0.41µ Temperature Range C: 0 - 500 C Temperature Range F: 32 - 932 F Ferodo DS2500 Brake Compound Details:The Ferodo DS2500 is the best hybrid street and track day pad available. Designed for driving on the street, mountain runs and light track day with a stable average friction coefficient of 0,41 over a wide working temperature range of 32 to 932 F, (0 to 500 C)Featuring a moderately high initial bite and the solid fade resistance of a trackpad, but with relatively low dust and noise levels of a street pad. When the Ferodo DS2500 is used as a street pad, it can produce some squeal on most vehicle platforms. The most common use of the Ferodo DS2500 is mountain runs, autocross, and some light track duty on street tires in colder temperatures.When used on track on heavy (3,000+ lbs.+) track cars with high horsepower and R Compound tires, the DS2500 pad wear rates tend to be considerably higher vs. Ferodo Racing's other compounds. Do not expect to win the WRL GTU class on Ferodo DS2500 brake pads, but it is the perfect dual purpose street and light track day pad.Ferodo FRP3083 Cross Reference: AP Racing: CP6600D55 Endless: RCP100 Pagid: 4345 Ferodo FRP3083 Fitment: 2018+ McLaren 600LT w/ Iron discs 2015+ McLaren 570S w/ Iron discs 2014-17 650S / Spyder w/ Iron discs 2011-14 McLaren MP4-12C w/ Iron discs AP Racing CP6600 D55 AP Racing CP9540 D55 AP Racing CP9541 D55 AP Racing CP9542 D55 AP Racing CP8530 D55 AP Racing CP8540 D55 AP Racing CP8560 D55

Carbotech Brakes Carbotech 1986-1999 Acura Integra Rear Pads from $152.00

Carbotech Brake Pads How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT374 Fits:1986-1999 Acura Integra [img-12096-left-large_default] Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F. [img-12096-left-large_default]

Carbotech Brakes Carbotech 1999-2001 Subaru Impreza Front Pads (NON-RS) from $130.00

Carbotech Brake Pads How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT722 Fits: 1999-2001 Subaru Impreza Does NOT Fit: Subaru Impreza with RS package Brake Compounds Carbotechâ 1521â The Carbotechâ 1521â is our high performance street compound. The 1521â compound is known for its release and modulation, along with unmatched rotor friendliness. 1521â is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotechâ 1521â operating range starts out at ambient and goes up to 800 F (426 C+). 1521â is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotechâ 1521â is NOT recommended for ANY track use. Carbotechâ AX6â The AX6â is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50 F to 1000 F + (10 C to 537 C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6â for street driving as well, even though Carbotechâ doesn't recommend street driving with AX6â due to possible elevated levels of dust and noise. AX6â is NOT recommended as a race compound in most applications. Carbotechâ XP8â A high torque brake compound with a wide operating temperature range of 200 F-1250 F+ (93 C to 676 C+). Carbotechâ XP8â is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotechâ does NOT recommended XP8â as a daily driven street pad due to elevated levels of dust and noise. Carbotechâ XP8â is a great compound on the front & rear of most open wheel and sports racers. Carbotechâ XP10â When Carbotechâ unleashed the XP10â to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10â has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475 F (801 C). XP10â still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotechâ compounds so successful. Carbotechâ XP10â is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP12â Another highly successful XPâ series compound with an excellent initial bite, torque and fade resistance over and above the XP10â compound. XP12â has temperature range of 250 F to 1850 F+ (121 C to 1010 C+). The XP12â has that excellent Carbotechâ release and modulation that has made all other Carbotechâ compounds so successful. The XP12â is more rotor aggressive than XP10â , but compared to the competition the XP12â is still very rotor friendly. XP12â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP20â The latest iteration of the highly successful XPâ series of compounds. XP20â is a step up from the highly successful XP16â compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20â is another major step in progression of the highly successful XPâ series line of compounds from Carbotechâ . XP20â has a temperature range of 275 F to 2000 F+ (135 C to 1093 C+). Carbotechâ XP20â maintains our tradition of having the outstanding release and modulation that has made all other Carbotechâ compounds so successful. Carbotechâ XP20â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ XP24â XP24â is the pinnacle compound of the extremely successful XPâ Series of compounds engineered by Carbotechâ . This compound is based on the same fundamentals that exist in all other Carbotechâ formulations. XP24â has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotechâ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotechâ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24â has a temperature range of 400 F to 2000 F+ (204 C to 1093 C+). Carbotechâ XP24â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotechâ RP2â The RP2â compound was engineered for endurance racing based on our highly successful XPâ Series formulations. RP2â has strong initial bite, a little less modulation than our XP12â , but still maintains the rotor friendliness of our XPâ series compounds. RP2â has great fade resistance with a temperature range of 250 F to 1450 F+ (121 C to 787 C). RP2â is as rotor friendly as our XPâ series compounds. Carbotechâ RP2â is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotechâ 913 Kelated Metallicâ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotechâ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750 F.

Find anything you need

Discovery Parts offers premium racing brake products only from top manufacturers.

Racing brake components ensure you have consistent and repeatable performance from white flag to checker.

Select your vehicle make below to see the best racing brakes for your car.