Carbotech CT635 1.8L Miata Front 1994-2005
Carbotech Brakes Carbotech CT635 1.8L Miata Front 1994-2005 from $123.00
Carbotech Brake Pads Carbotech 1.8L Miata Front Brake Pads for 1994-2005 Mazda Miata. 2nd Generation Miata front brake pads in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. Carbotech makes many different compounds for your NB 1.8L Miata and for the track, the most popular set-up is XP10 Front and XP8 rear. This seems to balance out the Hoosier Spec tire to the suspension nicely. If you run a stickier tire, you want to start with XP10/XP8 and maybe go to XP12 after you determine you can handle the increased torque without getting into the ABS. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT635 [img-12122-left-large_default] BRAKE COMPOUNDS Carbotech™ 1521™ The Carbotech™ 1521™ is our high performance street compound. The 1521™ compound is known for its release and modulation, along with unmatched rotor friendliness. 1521™ is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech™ 1521™ operating range starts out at ambient and goes up to 800°F (426°C+). 1521™ is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech™ 1521™ is NOT recommended for ANY track use. Carbotech™ AX6™ The AX6™ is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50°F to 1000°F + (10°C to 537°C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6™ for street driving as well, even though Carbotech™ doesn't recommend street driving with AX6™ due to possible elevated levels of dust and noise. AX6™ is NOT recommended as a race compound in most applications. Carbotech™ XP8™ A high torque brake compound with a wide operating temperature range of 200°F-1250°F+ (93°C to 676°C+). Carbotech™ XP8™ is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech™ does NOT recommended XP8™ as a daily driven street pad due to elevated levels of dust and noise. Carbotech™ XP8™ is a great compound on the front & rear of most open wheel and sports racers. Carbotech™ XP10™ When Carbotech™ unleashed the XP10™ to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10™ has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475°F (801°C). XP10™ still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech™ compounds so successful. Carbotech™ XP10™ is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP12™ Another highly successful XP™ series compound with an excellent initial bite, torque and fade resistance over and above the XP10™ compound. XP12™ has temperature range of 250°F to 1850°F+ (121°C to 1010°C+). The XP12™ has that excellent Carbotech™ release and modulation that has made all other Carbotech™ compounds so successful. The XP12™ is more rotor aggressive than XP10™, but compared to the competition the XP12™ is still very rotor friendly. XP12™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP20™ The latest iteration of the highly successful XP™ series of compounds. XP20™ is a step up from the highly successful XP16™ compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20™ is another major step in progression of the highly successful XP™ series line of compounds from Carbotech™. XP20™ has a temperature range of 275°F to 2000°F+ (135°C to 1093°C+). Carbotech™ XP20™ maintains our tradition of having the outstanding release and modulation that has made all other Carbotech™ compounds so successful. Carbotech™ XP20™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP24™ XP24™ is the pinnacle compound of the extremely successful XP™ Series of compounds engineered by Carbotech™. This compound is based on the same fundamentals that exist in all other Carbotech™ formulations. XP24™ has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech™ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech™ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24™ has a temperature range of 400°F to 2000°F+ (204°C to 1093°C+). Carbotech™ XP24™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech™ RP2™ The RP2™ compound was engineered for endurance racing based on our highly successful XP™ Series formulations. RP2™ has strong initial bite, a little less modulation than our XP12™, but still maintains the rotor friendliness of our XP™ series compounds. RP2™ has great fade resistance with a temperature range of 250°F to 1450°F+ (121°C to 787°C). RP2™ is as rotor friendly as our XP™ series compounds. Carbotech™ RP2™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ 913 Kelated Metallic™ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech™ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750°F. [img-12122-left-large_default]
Carbotech CT636 1.8L Miata Rear 1994-2005
Carbotech Brakes Carbotech CT636 1.8L Miata Rear 1994-2005 from $114.00
Carbotech Brake Pads Carbotech 1.8L Miata Rear Brake Pads for 1994-2005 Mazda Miata. 2nd Generation Miata rear brake pads in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. Carbotech makes many different compounds for your NB 1.8L Miata and for the track, the most popular set-up is XP10 Front and XP8 rear. This seems to balance out the Hoosier Spec tire to the suspension nicely. If you run a stickier tire, you want to start with XP10/XP8 and maybe go to XP12 after you determine you can handle the increased torque without getting into the ABS. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT636 [img-12123-left-large_default] Brake Compounds Carbotech™ 1521™ The Carbotech™ 1521™ is our high performance street compound. The 1521™ compound is known for its release and modulation, along with unmatched rotor friendliness. 1521™ is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech™ 1521™ operating range starts out at ambient and goes up to 800°F (426°C+). 1521™ is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech™ 1521™ is NOT recommended for ANY track use. Carbotech™ AX6™ The AX6™ is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50°F to 1000°F + (10°C to 537°C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6™ for street driving as well, even though Carbotech™ doesn't recommend street driving with AX6™ due to possible elevated levels of dust and noise. AX6™ is NOT recommended as a race compound in most applications. Carbotech™ XP8™ A high torque brake compound with a wide operating temperature range of 200°F-1250°F+ (93°C to 676°C+). Carbotech™ XP8™ is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech™ does NOT recommended XP8™ as a daily driven street pad due to elevated levels of dust and noise. Carbotech™ XP8™ is a great compound on the front & rear of most open wheel and sports racers. Carbotech™ XP10™ When Carbotech™ unleashed the XP10™ to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10™ has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475°F (801°C). XP10™ still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech™ compounds so successful. Carbotech™ XP10™ is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP12™ Another highly successful XP™ series compound with an excellent initial bite, torque and fade resistance over and above the XP10™ compound. XP12™ has temperature range of 250°F to 1850°F+ (121°C to 1010°C+). The XP12™ has that excellent Carbotech™ release and modulation that has made all other Carbotech™ compounds so successful. The XP12™ is more rotor aggressive than XP10™, but compared to the competition the XP12™ is still very rotor friendly. XP12™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP20™ The latest iteration of the highly successful XP™ series of compounds. XP20™ is a step up from the highly successful XP16™ compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20™ is another major step in progression of the highly successful XP™ series line of compounds from Carbotech™. XP20™ has a temperature range of 275°F to 2000°F+ (135°C to 1093°C+). Carbotech™ XP20™ maintains our tradition of having the outstanding release and modulation that has made all other Carbotech™ compounds so successful. Carbotech™ XP20™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP24™ XP24™ is the pinnacle compound of the extremely successful XP™ Series of compounds engineered by Carbotech™. This compound is based on the same fundamentals that exist in all other Carbotech™ formulations. XP24™ has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech™ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech™ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24™ has a temperature range of 400°F to 2000°F+ (204°C to 1093°C+). Carbotech™ XP24™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech™ RP2™ The RP2™ compound was engineered for endurance racing based on our highly successful XP™ Series formulations. RP2™ has strong initial bite, a little less modulation than our XP12™, but still maintains the rotor friendliness of our XP™ series compounds. RP2™ has great fade resistance with a temperature range of 250°F to 1450°F+ (121°C to 787°C). RP2™ is as rotor friendly as our XP™ series compounds. Carbotech™ RP2™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ 913 Kelated Metallic™ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech™ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750°F. [img-12123-left-large_default]
Carbotech CT525 1.6L Miata Front 1990-1993
Carbotech Brakes Carbotech CT525 1.6L Miata Front 1990-1993 from $174.00
Carbotech Brake Pads Carbotech 1.6L Miata Front Brake Pads for 1990-1993 Mazda Miata. 1st Generation Miata front brake pads in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. Carbotech makes many different compounds for your NA 1.6L Miata and for the track, the most popular set-up is XP10 Front and XP8 rear. This seems to balance out the Hoosier Spec tire to the suspension nicely. If you run a stickier tire, you want to start with XP10/XP8 and maybe go to XP12 after you determine you can handle the increased torque without getting into the ABS. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT525 Thickness: .560" (14mm) Hawk equivalant: HB148_. Brake Compounds Carbotech™ 1521™ The Carbotech™ 1521™ is our high performance street compound. The 1521™ compound is known for its release and modulation, along with unmatched rotor friendliness. 1521™ is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech™ 1521™ operating range starts out at ambient and goes up to 800°F (426°C+). 1521™ is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech™ 1521™ is NOT recommended for ANY track use. Carbotech™ AX6™ The AX6™ is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50°F to 1000°F + (10°C to 537°C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6™ for street driving as well, even though Carbotech™ doesn't recommend street driving with AX6™ due to possible elevated levels of dust and noise. AX6™ is NOT recommended as a race compound in most applications. Carbotech™ XP8™ A high torque brake compound with a wide operating temperature range of 200°F-1250°F+ (93°C to 676°C+). Carbotech™ XP8™ is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech™ does NOT recommended XP8™ as a daily driven street pad due to elevated levels of dust and noise. Carbotech™ XP8™ is a great compound on the front & rear of most open wheel and sports racers. Carbotech™ XP10™ When Carbotech™ unleashed the XP10™ to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10™ has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475°F (801°C). XP10™ still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech™ compounds so successful. Carbotech™ XP10™ is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP12™ Another highly successful XP™ series compound with an excellent initial bite, torque and fade resistance over and above the XP10™ compound. XP12™ has temperature range of 250°F to 1850°F+ (121°C to 1010°C+). The XP12™ has that excellent Carbotech™ release and modulation that has made all other Carbotech™ compounds so successful. The XP12™ is more rotor aggressive than XP10™, but compared to the competition the XP12™ is still very rotor friendly. XP12™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP20™ The latest iteration of the highly successful XP™ series of compounds. XP20™ is a step up from the highly successful XP16™ compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20™ is another major step in progression of the highly successful XP™ series line of compounds from Carbotech™. XP20™ has a temperature range of 275°F to 2000°F+ (135°C to 1093°C+). Carbotech™ XP20™ maintains our tradition of having the outstanding release and modulation that has made all other Carbotech™ compounds so successful. Carbotech™ XP20™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP24™ XP24™ is the pinnacle compound of the extremely successful XP™ Series of compounds engineered by Carbotech™. This compound is based on the same fundamentals that exist in all other Carbotech™ formulations. XP24™ has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech™ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech™ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24™ has a temperature range of 400°F to 2000°F+ (204°C to 1093°C+). Carbotech™ XP24™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech™ RP2™ The RP2™ compound was engineered for endurance racing based on our highly successful XP™ Series formulations. RP2™ has strong initial bite, a little less modulation than our XP12™, but still maintains the rotor friendliness of our XP™ series compounds. RP2™ has great fade resistance with a temperature range of 250°F to 1450°F+ (121°C to 787°C). RP2™ is as rotor friendly as our XP™ series compounds. Carbotech™ RP2™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ 913 Kelated Metallic™ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech™ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750°F.
Carbotech MX-5 (NC & ND) Rear 2006-2021 CT1180
Carbotech Brakes Carbotech MX-5 (NC & ND) Rear 2006-2021 CT1180 from $160.00
Carbotech MX-5 (NC & ND) Rear 2006-2018 Brake Pads Carbotech MX-5 (NC & ND) Rear Brake Pads for 2006-2021 Carbotech CT1180 Rear MX-5 Brake Pads in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. Most popular MX-5 Carbotech track pad set up is XP-10 on the front and XP-8 on the rear. This balances out the car very well and is predictable in all temperature ranges. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT1180 [img-12137-left-large_default] BRAKE COMPOUNDS Carbotech™ 1521™ The Carbotech™ 1521™ is our high performance street compound. The 1521™ compound is known for its release and modulation, along with unmatched rotor friendliness. 1521™ is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech™ 1521™ operating range starts out at ambient and goes up to 800°F (426°C+). 1521™ is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech™ 1521™ is NOT recommended for ANY track use. Carbotech™ AX6™ The AX6™ is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50°F to 1000°F + (10°C to 537°C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6™ for street driving as well, even though Carbotech™ doesn't recommend street driving with AX6™ due to possible elevated levels of dust and noise. AX6™ is NOT recommended as a race compound in most applications. Carbotech™ XP8™ A high torque brake compound with a wide operating temperature range of 200°F-1250°F+ (93°C to 676°C+). Carbotech™ XP8™ is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech™ does NOT recommended XP8™ as a daily driven street pad due to elevated levels of dust and noise. Carbotech™ XP8™ is a great compound on the front & rear of most open wheel and sports racers. Carbotech™ XP10™ When Carbotech™ unleashed the XP10™ to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10™ has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475°F (801°C). XP10™ still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech™ compounds so successful. Carbotech™ XP10™ is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP12™ Another highly successful XP™ series compound with an excellent initial bite, torque and fade resistance over and above the XP10™ compound. XP12™ has temperature range of 250°F to 1850°F+ (121°C to 1010°C+). The XP12™ has that excellent Carbotech™ release and modulation that has made all other Carbotech™ compounds so successful. The XP12™ is more rotor aggressive than XP10™, but compared to the competition the XP12™ is still very rotor friendly. XP12™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP20™ The latest iteration of the highly successful XP™ series of compounds. XP20™ is a step up from the highly successful XP16™ compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20™ is another major step in progression of the highly successful XP™ series line of compounds from Carbotech™. XP20™ has a temperature range of 275°F to 2000°F+ (135°C to 1093°C+). Carbotech™ XP20™ maintains our tradition of having the outstanding release and modulation that has made all other Carbotech™ compounds so successful. Carbotech™ XP20™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP24™ XP24™ is the pinnacle compound of the extremely successful XP™ Series of compounds engineered by Carbotech™. This compound is based on the same fundamentals that exist in all other Carbotech™ formulations. XP24™ has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech™ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech™ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24™ has a temperature range of 400°F to 2000°F+ (204°C to 1093°C+). Carbotech™ XP24™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech™ RP2™ The RP2™ compound was engineered for endurance racing based on our highly successful XP™ Series formulations. RP2™ has strong initial bite, a little less modulation than our XP12™, but still maintains the rotor friendliness of our XP™ series compounds. RP2™ has great fade resistance with a temperature range of 250°F to 1450°F+ (121°C to 787°C). RP2™ is as rotor friendly as our XP™ series compounds. Carbotech™ RP2™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ 913 Kelated Metallic™ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech™ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750°F. [img-12137-left-large_default]
Carbotech CT458 1.6L Miata Rear 1990-1993
Carbotech Brakes Carbotech CT458 1.6L Miata Rear 1990-1993 from $186.00
Carbotech Brake Pads Carbotech 1.6L Miata Rear Brake Pads for 1990-1993 Mazda Miata. 1st Generation Miata rear brake pads in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. Carbotech makes many different compounds for your NA 1.6L Miata and for the track, the most popular set-up is XP10 Front and XP8 rear. This seems to balance out the Hoosier Spec tire to the suspension nicely. If you run a stickier tire, you want to start with XP10/XP8 and maybe go to XP12 after you determine you can handle the increased torque without getting into the ABS. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT458 Cross reference to Hawk Brake: HB157 Cross reference to G-Loc Brakes: GLC-458 [img-12098-left-large_default] Brake Compounds Carbotech™ 1521™ The Carbotech™ 1521™ is our high performance street compound. The 1521™ compound is known for its release and modulation, along with unmatched rotor friendliness. 1521™ is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech™ 1521™ operating range starts out at ambient and goes up to 800°F (426°C+). 1521™ is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech™ 1521™ is NOT recommended for ANY track use. Carbotech™ AX6™ The AX6™ is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50°F to 1000°F + (10°C to 537°C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6™ for street driving as well, even though Carbotech™ doesn't recommend street driving with AX6™ due to possible elevated levels of dust and noise. AX6™ is NOT recommended as a race compound in most applications. Carbotech™ XP8™ A high torque brake compound with a wide operating temperature range of 200°F-1250°F+ (93°C to 676°C+). Carbotech™ XP8™ is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech™ does NOT recommended XP8™ as a daily driven street pad due to elevated levels of dust and noise. Carbotech™ XP8™ is a great compound on the front & rear of most open wheel and sports racers. Carbotech™ XP10™ When Carbotech™ unleashed the XP10™ to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10™ has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475°F (801°C). XP10™ still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech™ compounds so successful. Carbotech™ XP10™ is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP12™ Another highly successful XP™ series compound with an excellent initial bite, torque and fade resistance over and above the XP10™ compound. XP12™ has temperature range of 250°F to 1850°F+ (121°C to 1010°C+). The XP12™ has that excellent Carbotech™ release and modulation that has made all other Carbotech™ compounds so successful. The XP12™ is more rotor aggressive than XP10™, but compared to the competition the XP12™ is still very rotor friendly. XP12™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP20™ The latest iteration of the highly successful XP™ series of compounds. XP20™ is a step up from the highly successful XP16™ compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20™ is another major step in progression of the highly successful XP™ series line of compounds from Carbotech™. XP20™ has a temperature range of 275°F to 2000°F+ (135°C to 1093°C+). Carbotech™ XP20™ maintains our tradition of having the outstanding release and modulation that has made all other Carbotech™ compounds so successful. Carbotech™ XP20™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP24™ XP24™ is the pinnacle compound of the extremely successful XP™ Series of compounds engineered by Carbotech™. This compound is based on the same fundamentals that exist in all other Carbotech™ formulations. XP24™ has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech™ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech™ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24™ has a temperature range of 400°F to 2000°F+ (204°C to 1093°C+). Carbotech™ XP24™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech™ RP2™ The RP2™ compound was engineered for endurance racing based on our highly successful XP™ Series formulations. RP2™ has strong initial bite, a little less modulation than our XP12™, but still maintains the rotor friendliness of our XP™ series compounds. RP2™ has great fade resistance with a temperature range of 250°F to 1450°F+ (121°C to 787°C). RP2™ is as rotor friendly as our XP™ series compounds. Carbotech™ RP2™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ 913 Kelated Metallic™ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech™ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750°F. [img-12098-left-large_default]
Carbotech CT1179R MX-5 (NC) 06-14 Front Race Pads
Carbotech Brakes Carbotech CT1179R MX-5 (NC) 06-14 Front Race Pads from $193.00
Carbotech Brake Pads Carbotech CT1179R MX-5 Front Brake Pads for 2006-2014 Carbotech CT1179 Front MX-5 Brake Pads in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. This is the larger "R" full width pad that you must remove the caliper to pad end clips. The larger pads eliminate the tapered edges on the stock pads, give you a larger contact patch on the pad. This is one of the best brake upgrades you can make while retaining the stock NC calipers. Most popular MX-5 Carbotech track pad set up is XP-10 on the front and XP-8 on the rear. This balances out the car very well and is predictable in all temperature ranges. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer part number: CT1179R Fits: 2005-2015 Mazda MX-5 Front Axle Compounds available: AX6, XP8, XP10, SP12, XP20, XP24 Thickness of backing plate and pad material: .565" Most popular track combination: XP10 Front, XP8 Rear G-Loc equivelant: GLC-CP1179 Hawk Brake equivelant: HB522_.565 [img-12156-left-large_default] BRAKE COMPOUNDS Carbotech™ 1521™ The Carbotech™ 1521™ is our high performance street compound. The 1521™ compound is known for its release and modulation, along with unmatched rotor friendliness. 1521™ is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech™ 1521™ operating range starts out at ambient and goes up to 800°F (426°C+). 1521™ is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech™ 1521™ is NOT recommended for ANY track use. Carbotech™ AX6™ The AX6™ is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50°F to 1000°F + (10°C to 537°C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6™ for street driving as well, even though Carbotech™ doesn't recommend street driving with AX6™ due to possible elevated levels of dust and noise. AX6™ is NOT recommended as a race compound in most applications. Carbotech™ XP8™ A high torque brake compound with a wide operating temperature range of 200°F-1250°F+ (93°C to 676°C+). Carbotech™ XP8™ is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech™ does NOT recommended XP8™ as a daily driven street pad due to elevated levels of dust and noise. Carbotech™ XP8™ is a great compound on the front & rear of most open wheel and sports racers. Carbotech™ XP10™ When Carbotech™ unleashed the XP10™ to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10™ has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475°F (801°C). XP10™ still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech™ compounds so successful. Carbotech™ XP10™ is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP12™ Another highly successful XP™ series compound with an excellent initial bite, torque and fade resistance over and above the XP10™ compound. XP12™ has temperature range of 250°F to 1850°F+ (121°C to 1010°C+). The XP12™ has that excellent Carbotech™ release and modulation that has made all other Carbotech™ compounds so successful. The XP12™ is more rotor aggressive than XP10™, but compared to the competition the XP12™ is still very rotor friendly. XP12™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP20™ The latest iteration of the highly successful XP™ series of compounds. XP20™ is a step up from the highly successful XP16™ compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20™ is another major step in progression of the highly successful XP™ series line of compounds from Carbotech™. XP20™ has a temperature range of 275°F to 2000°F+ (135°C to 1093°C+). Carbotech™ XP20™ maintains our tradition of having the outstanding release and modulation that has made all other Carbotech™ compounds so successful. Carbotech™ XP20™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP24™ XP24™ is the pinnacle compound of the extremely successful XP™ Series of compounds engineered by Carbotech™. This compound is based on the same fundamentals that exist in all other Carbotech™ formulations. XP24™ has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech™ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech™ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24™ has a temperature range of 400°F to 2000°F+ (204°C to 1093°C+). Carbotech™ XP24™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech™ RP2™ The RP2™ compound was engineered for endurance racing based on our highly successful XP™ Series formulations. RP2™ has strong initial bite, a little less modulation than our XP12™, but still maintains the rotor friendliness of our XP™ series compounds. RP2™ has great fade resistance with a temperature range of 250°F to 1450°F+ (121°C to 787°C). RP2™ is as rotor friendly as our XP™ series compounds. Carbotech™ RP2™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ 913 Kelated Metallic™ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech™ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750°F. [img-12156-left-large_default]
Carbotech CT890 1.8L Miata Sport Front 2001-2005
Carbotech Brakes Carbotech CT890 1.8L Miata Sport Front 2001-2005 from $182.00
Carbotech 1.8L Miata Sport Front 2001-2005 Fitting the front Mazda Sport brake package on the NB chassis 2001-2005 calipers, the Carbotech CT890 brake pad set is available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech 1.8L Miata Sport Front 2001-2005 Details: Manufacturer: Carbotech Manufacturer Part Number: CT890 Most popular track combination: XP10 Front, XP8 Rear G-Loc cross reference: GP890 Hawk cross reference: HB431._606 Material thickness of pad of backing plate and pad material: .606" Material thickness of pad of backing plate and pad material: 15mm [img-12163-left-large_default] BRAKE COMPOUNDS Carbotech™ 1521™ The Carbotech™ 1521™ is our high performance street compound. The 1521™ compound is known for its release and modulation, along with unmatched rotor friendliness. 1521™ is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech™ 1521™ operating range starts out at ambient and goes up to 800°F (426°C+). 1521™ is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech™ 1521™ is NOT recommended for ANY track use. Carbotech™ AX6™ The AX6™ is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50°F to 1000°F + (10°C to 537°C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6™ for street driving as well, even though Carbotech™ doesn't recommend street driving with AX6™ due to possible elevated levels of dust and noise. AX6™ is NOT recommended as a race compound in most applications. Carbotech™ XP8™ A high torque brake compound with a wide operating temperature range of 200°F-1250°F+ (93°C to 676°C+). Carbotech™ XP8™ is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech™ does NOT recommended XP8™ as a daily driven street pad due to elevated levels of dust and noise. Carbotech™ XP8™ is a great compound on the front & rear of most open wheel and sports racers. Carbotech™ XP10™ When Carbotech™ unleashed the XP10™ to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10™ has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475°F (801°C). XP10™ still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech™ compounds so successful. Carbotech™ XP10™ is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP12™ Another highly successful XP™ series compound with an excellent initial bite, torque and fade resistance over and above the XP10™ compound. XP12™ has temperature range of 250°F to 1850°F+ (121°C to 1010°C+). The XP12™ has that excellent Carbotech™ release and modulation that has made all other Carbotech™ compounds so successful. The XP12™ is more rotor aggressive than XP10™, but compared to the competition the XP12™ is still very rotor friendly. XP12™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP20™ The latest iteration of the highly successful XP™ series of compounds. XP20™ is a step up from the highly successful XP16™ compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20™ is another major step in progression of the highly successful XP™ series line of compounds from Carbotech™. XP20™ has a temperature range of 275°F to 2000°F+ (135°C to 1093°C+). Carbotech™ XP20™ maintains our tradition of having the outstanding release and modulation that has made all other Carbotech™ compounds so successful. Carbotech™ XP20™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP24™ XP24™ is the pinnacle compound of the extremely successful XP™ Series of compounds engineered by Carbotech™. This compound is based on the same fundamentals that exist in all other Carbotech™ formulations. XP24™ has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech™ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech™ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24™ has a temperature range of 400°F to 2000°F+ (204°C to 1093°C+). Carbotech™ XP24™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech™ RP2™ The RP2™ compound was engineered for endurance racing based on our highly successful XP™ Series formulations. RP2™ has strong initial bite, a little less modulation than our XP12™, but still maintains the rotor friendliness of our XP™ series compounds. RP2™ has great fade resistance with a temperature range of 250°F to 1450°F+ (121°C to 787°C). RP2™ is as rotor friendly as our XP™ series compounds. Carbotech™ RP2™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ 913 Kelated Metallic™ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech™ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750°F. Carbotech CT890 1.8L Miata Sport Front 2001-2005 Fitment: 2001 MAZDA MIATA W/ SPORT SUSPENSION ALL (2001, 2001) 2001 MAZDA MIATA WITH HARD OR SPORT SUSPENSION (2001, 2001) 2001 MAZDA MIATA WITH HARD OR SPORT SUSPENSION #N/A (2001) 2002 MAZDA MIATA W/ SPORT SUSPENSION ALL (2002, 2002) 2002 MAZDA MIATA WITH HARD OR SPORT SUSPENSION (2002, 2002) 2002 MAZDA MIATA WITH HARD OR SPORT SUSPENSION #N/A (2002) 2003 MAZDA MIATA W/ SPORT SUSPENSION ALL (2003, 2003) 2003 MAZDA MIATA NO SUBMODEL #N/A (2003) 2004 MAZDA MIATA W/ SPORT SUSPENSION ALL (2004, 2004) 2004 MAZDA MIATA MAZDASPEED ALL (2004, 2004) 2004 MAZDA MIATA NO SUBMODEL #N/A (2004) 2005 MAZDA MIATA W/ SPORT SUSPENSION ALL (2005, 2005) 2005 MAZDA MIATA MAZDASPEED ALL (2005, 2005) 2005 MAZDA MIATA NO SUBMODEL #N/A (2005) [img-12163-left-large_default]
Carbotech CT891 1.8L Miata Sport Rear 2001-2005
Carbotech Brakes Carbotech CT891 1.8L Miata Sport Rear 2001-2005 from $166.00
Carbotech 1.8L Miata Sport Rear 2001-2005 Fitting the Mazda Sport brake package on the NB chassis 2001-2005 rear calipers, the Carbotech CT891 brake pad set is available in Carbotech AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. How To Properly Bed In Carbotech Racing Brake Pads Carbotech 1.8L Miata Sport Rear 2001-2005 Details: Manufacturer: Carbotech Manufacturer Part Number: CT891 Most popular track combination: XP10 Front, XP8 Rear G-Loc cross reference: GP891 Hawk cross reference: HB442._606 Material thickness of pad of backing plate and pad material: .496" Material thickness of pad of backing plate and pad material: 13mm [img-12164-left-large_default] BRAKE COMPOUNDS Carbotech™ 1521™ The Carbotech™ 1521™ is our high performance street compound. The 1521™ compound is known for its release and modulation, along with unmatched rotor friendliness. 1521™ is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech™ 1521™ operating range starts out at ambient and goes up to 800°F (426°C+). 1521™ is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech™ 1521™ is NOT recommended for ANY track use. Carbotech™ AX6™ The AX6™ is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50°F to 1000°F + (10°C to 537°C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6™ for street driving as well, even though Carbotech™ doesn't recommend street driving with AX6™ due to possible elevated levels of dust and noise. AX6™ is NOT recommended as a race compound in most applications. Carbotech™ XP8™ A high torque brake compound with a wide operating temperature range of 200°F-1250°F+ (93°C to 676°C+). Carbotech™ XP8™ is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech™ does NOT recommended XP8™ as a daily driven street pad due to elevated levels of dust and noise. Carbotech™ XP8™ is a great compound on the front & rear of most open wheel and sports racers. Carbotech™ XP10™ When Carbotech™ unleashed the XP10™ to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10™ has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475°F (801°C). XP10™ still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech™ compounds so successful. Carbotech™ XP10™ is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP12™ Another highly successful XP™ series compound with an excellent initial bite, torque and fade resistance over and above the XP10™ compound. XP12™ has temperature range of 250°F to 1850°F+ (121°C to 1010°C+). The XP12™ has that excellent Carbotech™ release and modulation that has made all other Carbotech™ compounds so successful. The XP12™ is more rotor aggressive than XP10™, but compared to the competition the XP12™ is still very rotor friendly. XP12™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP20™ The latest iteration of the highly successful XP™ series of compounds. XP20™ is a step up from the highly successful XP16™ compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20™ is another major step in progression of the highly successful XP™ series line of compounds from Carbotech™. XP20™ has a temperature range of 275°F to 2000°F+ (135°C to 1093°C+). Carbotech™ XP20™ maintains our tradition of having the outstanding release and modulation that has made all other Carbotech™ compounds so successful. Carbotech™ XP20™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP24™ XP24™ is the pinnacle compound of the extremely successful XP™ Series of compounds engineered by Carbotech™. This compound is based on the same fundamentals that exist in all other Carbotech™ formulations. XP24™ has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech™ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech™ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24™ has a temperature range of 400°F to 2000°F+ (204°C to 1093°C+). Carbotech™ XP24™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech™ RP2™ The RP2™ compound was engineered for endurance racing based on our highly successful XP™ Series formulations. RP2™ has strong initial bite, a little less modulation than our XP12™, but still maintains the rotor friendliness of our XP™ series compounds. RP2™ has great fade resistance with a temperature range of 250°F to 1450°F+ (121°C to 787°C). RP2™ is as rotor friendly as our XP™ series compounds. Carbotech™ RP2™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ 913 Kelated Metallic™ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech™ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750°F. Carbotech 1.8L Miata Sport Rear 2001-2005 Fitment: 2001 MAZDA MIATA WITH HARD OR SPORT SUSPENSION #N/A (2001) 2001 MAZDA MIATA WITH SPORT SUSPENSION (2001) 2002 MAZDA MIATA WITH HARD OR SPORT SUSPENSION #N/A (2002) 2002 MAZDA MIATA WITH SPORT SUSPENSION (2002) 2003 MAZDA MIATA WITH SPORT SUSPENSION (2003) 2003 MAZDA MIATA NO SUBMODEL #N/A (2003) 2004 MAZDA MIATA NO SUBMODEL #N/A (2004) 2005 MAZDA MIATA NO SUBMODEL #N/A (2005) [img-12164-left-large_default]
Carbotech CT1179 MX-5 (NC) Front 2006-2014
Carbotech Brakes Carbotech CT1179 MX-5 (NC) Front 2006-2014 from $178.00
Carbotech Brake Pads Carbotech MX-5 Front Brake Pads for 2006-2014 Carbotech CT1179 Front MX-5 Brake Pads in 1521, AX6, XP8, XP10, XP12, XP20, XP24 and RP2 compounds. Most popular MX-5 Carbotech track pad set up is XP-10 on the front and XP-8 on the rear. This balances out the car very well and is predictable in all temperature ranges. How To Properly Bed In Carbotech Racing Brake Pads Manufacturer: Carbotech Manufacturer Part Number: CT1179 [img-12138-left-large_default] BRAKE COMPOUNDS Carbotech™ 1521™ The Carbotech™ 1521™ is our high performance street compound. The 1521™ compound is known for its release and modulation, along with unmatched rotor friendliness. 1521™ is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech™ 1521™ operating range starts out at ambient and goes up to 800°F (426°C+). 1521™ is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech™ 1521™ is NOT recommended for ANY track use. Carbotech™ AX6™ The AX6™ is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50°F to 1000°F + (10°C to 537°C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6™ for street driving as well, even though Carbotech™ doesn't recommend street driving with AX6™ due to possible elevated levels of dust and noise. AX6™ is NOT recommended as a race compound in most applications. Carbotech™ XP8™ A high torque brake compound with a wide operating temperature range of 200°F-1250°F+ (93°C to 676°C+). Carbotech™ XP8™ is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech™ does NOT recommended XP8™ as a daily driven street pad due to elevated levels of dust and noise. Carbotech™ XP8™ is a great compound on the front & rear of most open wheel and sports racers. Carbotech™ XP10™ When Carbotech™ unleashed the XP10™ to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10™ has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475°F (801°C). XP10™ still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech™ compounds so successful. Carbotech™ XP10™ is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP12™ Another highly successful XP™ series compound with an excellent initial bite, torque and fade resistance over and above the XP10™ compound. XP12™ has temperature range of 250°F to 1850°F+ (121°C to 1010°C+). The XP12™ has that excellent Carbotech™ release and modulation that has made all other Carbotech™ compounds so successful. The XP12™ is more rotor aggressive than XP10™, but compared to the competition the XP12™ is still very rotor friendly. XP12™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP20™ The latest iteration of the highly successful XP™ series of compounds. XP20™ is a step up from the highly successful XP16™ compound. With an extremely aggressive initial bite, linear torque curve and excellent fade resistance the XP20™ is another major step in progression of the highly successful XP™ series line of compounds from Carbotech™. XP20™ has a temperature range of 275°F to 2000°F+ (135°C to 1093°C+). Carbotech™ XP20™ maintains our tradition of having the outstanding release and modulation that has made all other Carbotech™ compounds so successful. Carbotech™ XP20™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ XP24™ XP24™ is the pinnacle compound of the extremely successful XP™ Series of compounds engineered by Carbotech™. This compound is based on the same fundamentals that exist in all other Carbotech™ formulations. XP24™ has even more initial bite, more overall bite, and more torque along with the most linear torque curve we have ever offered. The thermal characteristics are of the highest Carbotech™ offers along with one of the highest coefficient of friction ratings offered by anyone in the braking industry. This compound is the longest wearing compound Carbotech™ offers as it was originally engineered for endurance applications at the highest pro racing levels. This revolutionary new compound has been extremely successful with open wheel, closed wheel, sprint and endurance applications. XP24™ has a temperature range of 400°F to 2000°F+ (204°C to 1093°C+). Carbotech™ XP24™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise along with the necessary heat required to work properly. Carbotech™ RP2™ The RP2™ compound was engineered for endurance racing based on our highly successful XP™ Series formulations. RP2™ has strong initial bite, a little less modulation than our XP12™, but still maintains the rotor friendliness of our XP™ series compounds. RP2™ has great fade resistance with a temperature range of 250°F to 1450°F+ (121°C to 787°C). RP2™ is as rotor friendly as our XP™ series compounds. Carbotech™ RP2™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech™ 913 Kelated Metallic™ A D.O.T.-approved high-performance compound for brake shoes on high performance street vehicles and race cars. Carbotech™ Kelated Metallic (CKM) achieves a very high coefficient of friction (approx. 0.48 to 0.50) by taking advantage of a chemical reaction within the friction mass, which creates a tri-alloy metallic film at the liner/drum interface when subjected to heat and pressure. Designed to overcome the shortcomings of other liner materials, CKM is a very versatile and provides excellent braking performance in a wide variety of applications. Excellent wear characteristics and a very high resistance to lock-up under hard braking. Optimal recommended operating temperature range is from ambient to 750°F. [img-12138-left-large_default]
Carbotech CT1379 Brake Pads For Mazda ND Club with Brembo Front
Carbotech Brakes Carbotech CT1379 Brake Pads For Mazda ND Club with Brembo Front from $188.00
Carbotech CT1379 Brake Pads For Mazda ND Club with Brembo Front Fitting the front of the Mazda MX-5 Miata Club series with Brembo calipers, the Carbotech CT1379 is available in Carbotech 1521, AX6, XP8, XP10, XP12 and XP20 compounds. Carbotech offers a variety of compounds that can bring you to the deepest of brake zones, smooth consistent spirited mountain or track days, or the best street pads ever produced. How To Properly Bed In Carbotech Racing Brake Pads Carbotech CT1379 Brake Pads For Mazda ND Club with Brembo Front Details: Manufacturer: Carbotech Manufacturer Part Number: CT1379 Available compounds: 1521, AX6, XP6, XP8, XP10, XP12 Most popular track combination: XP10 Front, XP8 Rear Hawk cross reference: HB548U._590 Material thickness of pad of backing plate and pad material: .590" Material thickness of pad of backing plate and pad material: 15mm CARBOTECH BRAKE COMPOUNDS Carbotech 1521 The Carbotech™ 1521™ is our high performance street compound. The 1521™ compound is known for its release and modulation, along with unmatched rotor friendliness. 1521™ is also a very low dusting and low noise compound with an excellent initial bite. This compound's excellent linear torque production provides incredible braking force without ABS intervention. Carbotech™ 1521™ operating range starts out at ambient and goes up to 800°F (426°C+). 1521™ is suitable for ALL street cars, perfect for your tow vehicle or fleet vehicle. Carbotech™ 1521™ is NOT recommended for ANY track use. Carbotech AX6 The AX6™ is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50°F to 1000°F + (10°C to 537°C+). The advanced compound matrix provides an excellent initial bite, high coefficient of friction at lower temperatures along with very progressive brake modulation and release characteristics. Many drivers use the AX6™ for street driving as well, even though Carbotech™ doesn't recommend street driving with AX6™ due to possible elevated levels of dust and noise. AX6™ is NOT recommended as a race compound in most applications. Carbotech XP8 A high torque brake compound with a wide operating temperature range of 200°F-1250°F+ (93°C to 676°C+). Carbotech™ XP8™ is the first of our racing compounds. Good initial bite at race temperatures, high coefficient of friction, excellent modulation and release characteristics. Extremely high fade resistance and very rotor friendly. Perfect for track day use with any tire and can still be driven safely to and from the track. Carbotech™ does NOT recommended XP8™ as a daily driven street pad due to elevated levels of dust and noise. Carbotech™ XP8™ is a great compound on the front & rear of most open wheel and sports racers. Carbotech XP10 When Carbotech™ unleashed the XP10™ to the general public it immediately gathered multiple regional, divisional, and national championships. The XP10™ has a very strong initial bite with a coefficient of friction and rotor friendliness unmatched in the industry. Fade resistance is in excess of 1475°F (801°C). XP10™ still maintains the highly praised release, excellent modulation and rotor friendliness that have made all Carbotech™ compounds so successful. Carbotech™ XP10™ is not recommended as a daily-driven street pad due to possible elevated levels of dust and noise. Carbotech XP12 Another highly successful XP™ series compound with an excellent initial bite, torque and fade resistance over and above the XP10™ compound. XP12™ has temperature range of 250°F to 1850°F+ (121°C to 1010°C+). The XP12™ has that excellent Carbotech™ release and modulation that has made all other Carbotech™ compounds so successful. The XP12™ is more rotor aggressive than XP10™, but compared to the competition the XP12™ is still very rotor friendly. XP12™ is NOT recommended for use as a daily driven street pad due to possible elevated levels of dust and noise. Carbotech CT1379 Brake Pads For Front Axle Fitment: 2019 Mazda MX-5 Miata RF Club Brembo Brakes 2019 Mazda MX-5 Miata Club Brembo Brakes 2018 Mazda MX-5 Miata RF Club Brembo Brakes 2018 Mazda MX-5 Miata Club Brembo Brakes 2017 Mazda MX-5 Miata RF Club Brembo Brakes 2017 Mazda MX-5 Miata Club Brembo Brakes 2017 Alfa Romeo 4C Spider Incl.Disc Brake Pad Wear Sensor 2017 Alfa Romeo 4C Base Incl.Disc Brake Pad Wear Sensor 2016 Mazda MX-5 Miata Club Brembo Brakes 2016 Alfa Romeo 4C Spider Incl.Disc Brake Pad Wear Sensor 2016 Alfa Romeo 4C Base Incl.Disc Brake Pad Wear Sensor 2016 Alfa Romeo 4C 2015 Alfa Romeo 4C Spider Incl.Disc Brake Pad Wear Sensor 2015 Alfa Romeo 4C Launch Edition Incl.Disc Brake Pad Wear Sensor 2015 Alfa Romeo 4C Base Incl.Disc Brake Pad Wear Sensor 2015 Alfa Romeo 4C 2010 CHEVROLET HHR SS 2010 CHEVROLET Cobalt SS 2009 CHEVROLET HHR SS 2009 CHEVROLET Cobalt SS 2008 CHEVROLET HHR SS 2008 CHEVROLET Cobalt SS
Hawk HB157E.484
Hawk Brakes Hawk HB157E.484 "Blue" Race Pads - Miata 1.6L Rear $152.99
Hawk HB157E.484 Blue Miata 1.6 Rear Hawk HB157E.484 BLUE 9012 Miata 1.6 Rear Race Pads Details: Manufacturer: Hawk Performance Brakes Manfuacturer Pad Shape: HB157_.484 Manufacturer Pad Compound: E; Blue 9012 Low to mid temperature range Low to intermediate torque Excellent modulation Multi-purpose compound  
Hawk HB148E.560 BLUE 9012 Race Pads - Miata 1.6 Front
Hawk Brakes Hawk HB148E.560 BLUE 9012 Race Pads - Miata 1.6 Front $166.99
Hawk HB148E.560 Blue Miata 1.6 Front Hawk HB148E.560 BLUE 9012 Miata 1.6 Front Race Pads Details: Manufacturer: Hawk Performance Brakes Manfuacturer Pad Shape: HB148_.560 Manufacturer Pad Compound: E; Blue 9012 Low to mid temperature range Low to intermediate torque Excellent modulation Multi-purpose compound This part will fit (make sure that your vehicle is in the list): 1990 GEO STORM 2+2 GSI L4 1,6 GAS FI (1990) 1990 GEO STORM 2+2 L4 1,6 GAS FI (1990) 1990 GEO STORM BASE L4 1,6 GAS FI (1990) 1990 ISUZU IMPULSE XS L4 1,6 GAS FI (1990) 1990 MAZDA MIATA BASE L4 1,6 GAS FI (1990) 1991 GEO STORM 2+2 GSI L4 1,6 GAS FI (1991) 1991 GEO STORM 2+2 L4 1,6 GAS FI (1991) 1991 GEO STORM BASE L4 1,6 GAS FI (1991) 1991 ISUZU IMPULSE RS L4 1,6 GAS FI (1991) 1991 ISUZU IMPULSE XS L4 1,6 GAS FI (1991) 1991 MAZDA MIATA BASE L4 1,6 GAS FI (1991) 1991 MAZDA MIATA SE L4 1,6 GAS FI (1991) 1992 GEO STORM 2+2 GSI L4 1,8 GAS FI (1992) 1992 GEO STORM 2+2 L4 1,6 GAS FI (1992) 1992 GEO STORM BASE L4 1,6 GAS FI (1992) 1992 ISUZU IMPULSE RS L4 1,6 GAS FI (1992) 1992 ISUZU IMPULSE XS L4 1,8 GAS FI (1992) 1992 MAZDA MIATA BASE L4 1,6 GAS FI (1992) 1993 GEO STORM 2+2 GSI L4 1,8 GAS FI (1993) 1993 GEO STORM 2+2 L4 1,6 GAS FI (1993) 1993 GEO STORM BASE L4 1,6 GAS FI (1993) 1993 MAZDA MIATA BASE L4 1,6 GAS FI (1993) 1993 MAZDA MIATA LE L4 1,6 GAS FI (1993)  
Ferodo FCP1307H DS2500 Brake Pad Base Porsche 986 Front
Ferodo Ferodo FCP1307H DS2500 Brake Pad Base Porsche 986 Front $261.08
Ferodo FCP1307H DS2500 Brake Pad Base Porsche 986 Front The Ferodo FCP1307H brakle pad in the popular DS2500 compound fits the Porsche 986 base model (non-s) front axle. Popular in street and track dual purpose applications, the Ferodo DS2500 is one of the best street/track pads. No need to change to track pads and then to street pads every weekend. Now enjoy linear high-torque braking on the best of mountain rides and mild track days. Ferodo FCP1307H DS2500 Brake Pad Base Porsche 986 Front Details: Manufacturer: Ferodo Manufacturer part number: FCP-FCP1307H-N Primary Use: Street & Light Track Average Coefficient of Friction: 0.42 Temperature Range C: 0° - 500° C
Ferodo FCP1894H DS2500 MX-5 (NC & ND) Rear Brake Pad Set
Ferodo Ferodo FCP1894H DS2500 MX-5 (NC & ND) Rear Brake Pad Set $251.05
Ferodo FCP1894H DS2500 MX-5 (NC & ND) Rear Brake Pad Set Fitting the rear of the Miata MX-5 (NC & ND), the Ferodo DS2500 is one of the best street/track pads. No need to change to track pads and then to street pads every weekend. Now enjoy linear high-torque braking on the best of mountain rides and mild track days. Note: This rear brake pad set fits all NC & ND chassis Miata MX-5 with stock rear brakes, regardless of optional Brembo package. Ferodo FCP1894H DS2500 MX-5 (NC & ND) Rear Brake Pad Set¬†Details: Manufacturer: Ferodo Manufacturer part number: FCP-FCP1894H-N Primary Use: Street & Light Track Average Coefficient of Friction: 0.42 Temperature Range C: 0° - 500° C Temperature Range F: 32° - 932° F Ferodo FCP1894H DS2500 Complete Fitment Guide (Rear): 2006 Mazda Miata MX-5 2007 Mazda Miata MX-5 2008 Mazda Miata MX-5 2009 Mazda Miata MX-5 2010 Mazda Miata MX-5 2011 Mazda Miata MX-5 2012 Mazda Miata MX-5 2013 Mazda Miata MX-5 2014 Mazda Miata MX-5 2015 Mazda Miata MX-5 2016 Mazda Miata MX-5 w/ Brembo Package 2016 Mazda Miata MX-5 non-Brembo 2017 Mazda Miata MX-5 w/ Brembo Package 2017 Mazda Miata MX-5 non-Brembo 2018 Mazda Miata MX-5 w/ Brembo Package 2018 Mazda Miata MX-5 non-Brembo 2019 Mazda Miata MX-5 w/ Brembo Package 2019 Mazda Miata MX-5 non-Brembo 2020 Mazda Miata MX-5 w/ Brembo Package 2020 Mazda Miata MX-5 non-Brembo 2016 Fiat 124 Spider w/ Brembo Package 2016 Fiat 124 Spider non-Brembo 2017 Fiat 124 Spider w/ Brembo Package 2017 Fiat 124 Spider non-Brembo 2018 Fiat 124 Spider w/ Brembo Package 2018 Fiat 124 Spider non-Brembo
Ferodo FCP4821H DS2500 MX-5 (ND) w- Brembo Front Brake Pad Set
Ferodo Ferodo FCP4821H DS2500 MX-5 (ND) w- Brembo Front Brake Pad Set $292.38
Ferodo FCP4821H DS2500 MX-5 (ND) w/ Brembo Front Brake Pad Set Fitting the front of the Miata MX-5 (ND) equipped with the Brembo Package, the Ferodo DS2500 is one of the best street/track pads. No need to change to track pads and then to street pads every weekend. Now enjoy linear high-torque braking on the best of mountain rides and mild track days.   Ferodo FCP4821H DS2500 MX-5 (ND) w/ Brembo Front Brake Pad Set Details: Manufacturer: Ferodo Manufacturer part number: FCP-FCP4821H-N Primary Use: Street & Light Track Average Coefficient of Friction: 0.42 Temperature Range C: 0° - 500° C Temperature Range F: 32° - 932° F Ferodo FCP4821H DS2500 Complete Fitment Guide (Front): 2016 Mazda Miata MX-5 w/ Brembo Package 2017 Mazda Miata MX-5 w/ Brembo Package 2018 Mazda Miata MX-5 w/ Brembo Package 2019 Mazda Miata MX-5 w/ Brembo Package 2020 Mazda Miata MX-5 w/ Brembo Package 2016 Fiat 124 Spider w/ Brembo Package 2017 Fiat 124 Spider w/ Brembo Package 2018 Fiat 124 Spider w/ Brembo Package