Closeout Products

Sparco EVO QRT Racing Seat 2030 Expiry As Sparco's most well known competition seat, it was a no-brainer to provide the refreshed Evo with Sparco's QRT Ultra-Light Technology. Not content to leave well enough alone, Sparco went a step further by improving the overall fit and feel of the Sparco Evo QRT. Starting with the shoulder bolsters, Sparco trimmed down the width to help fitment into smaller cars without sacrificing support. Sparco then lowered the side bolsters just enough to improve ingress/egress into/out of the car. Finally, the shoulder belt guides have been raised for improved harness fit in all drivers. With small sports cars in mind (the Sparco Evo QRT fits perfectly in a Miata!), the Sparco Evo QRT is sure be a mainstay at the track! The Sparco EVO QRT series of seats feature the most back angle rake of all Sparco seats for a very comfortable driving position. Available in cloth or vinyl. The Sparco EVO QRT is FIA approved. Sparco EVO QRT Racing Seat Sizing The Sparco EVO series is among the most versatile competition seats we carry, available in the following four sizes to ensure proper fitment: EVO S – Small (up to 32” waist) EVO – Medium (up to 34” waist) EVO L – Large (up to 36” waist) EVO XL – Extra Large (38” waist) What Is Sparco QRT? Designed and developed at the Sparco OEM Composite Laboratory in Italy, QRT is a patented state-of-the-art technical process, based on aerospace technologies. QRT creates an unparalleled mechanical strength to weight ratio. This innovative production method generates the lightest fiberglass composite seat shells currently on the market; in fact, it guarantees a reduction in total weight of up to 30% compared to traditional production methods. The QRT seats approach the weight of a comparable carbon fiber seat at a lower price point. Sparco EVO QRT Racing Seat Technology QRT Ultralight fiberglass composite shell Excellent fitment into small cockpits 4 Sizes: Small through XL Excellent ergonomics Fire retardant fabric Special non-slip fabric FIA approved Sparco EVO QRT Racing Seat Dimensions EVO S Dimensions EVO Dimensions EVO L / XL Dimensions

Sparco Prime Spec 1 Driver Race Suit Save $1,300 off suggested retail price! The Sparco Prime Spec 1 Race Suit is a USA-exclusive suit that improves on Sparco’s original version of the Prime SP-16. The first thing you will notice is the new suit design. The Prime Spec 1 introduces two new multi-color options. In addition to a new design, the Sparco Prime Spec 1 adds extra features like fully-floating sleeves, belted waist, and internal pockets. The Sparco Prime Spec 1 Race Suit was made in collaboration with the McLaren Formula One team, resulting in the lightest FIA-approved racing suit in the world. The Prime Spec 1 has unparalleled technological features developed in Sparco’s vaunted R&D laboratories. This development project involved optimizing every race suit detail in terms of materials and construction. Details like an ultra-slim zipper, soft seamless Nomex/Vicosa® wrist and ankle cuffs, further reduced neck and shoulder pads, use of thinner thread, and ultra-flat stitching. The Sparco Prime Spec 1 Race Suit uses a three-layer construction with proprietary Sparco technology. The third, outer layer is a double-faced mesh made from original DuPont Nomex Comfort, an innovative fabric that delivers both extreme protection and maximum comfort, woven using the Kompact® system. The resulting material contains a high percentage of antistatic fibers, giving it extremely effective antistatic properties as well as excellent breathability. The Sparco Prime Spec 1 Race Suit features pre-curved arms and legs along with strategically-placed mesh stretch panels, giving this racing suit unbelievable comfort. The Sparco Prime Spec 1 is available in two color options. Sparco Prim Spec 1 Driver Race Suit Details: FIA 8856-2000 homologated Lightest FIA-approved suit in the world Exclusive DuPont Nomex fibers provide superior fire protection and comfort Pre-curved arms and legs Strategically located stretch panels Seamless arms and legs

Stilo ST5 GT Composite Racing Helmet   Snell SA2020 / FIA 8859-2015 The Stilo ST5 GT Composite Racing Helmet combines lightweight fiberglass/Kevlar composite construction, exceptional visibility, and one of the most versatile integrated accessory systems in motorsports. Designed for GT racing, endurance competition, road racing, and performance driving, the ST5 GT delivers professional racing helmet technology with the flexibility to accommodate a wide range of driver equipment. Certified to Snell SA2020 and FIA 8859-2015, the Stilo ST5 GT Composite features an advanced Multi Sandwich Fiber (MSF) shell, an expansive eyeport, a clear anti-fog visor, noise-attenuating earmuffs, and integrated side ports for compatible communication, hydration, and ventilation accessories. Its Intermediate Oval interior shape, removable comfort padding, and two-shell construction provide a secure, customizable fit. Whether preparing for sprint races, endurance events, or track days, the Stilo ST5 GT Composite offers an excellent combination of comfort, safety engineering, and versatility. Stilo ST5 GT Composite Racing Helmet Features Snell SA2020 Certified: Meets the Snell SA2020 automotive racing helmet safety standard. FIA 8859-2015 Homologated: Approved to the FIA 8859-2015 motorsport helmet standard. Fiberglass/Kevlar Composite Shell: Multi Sandwich Fiber construction engineered for strength, impact management, and comfort. Autoclave-Molded Construction: Advanced shell manufacturing process designed to deliver consistent structural performance. Wide Eyeport: Expansive viewing area improves peripheral vision and cockpit awareness. Clear Anti-Fog Visor: Includes a 3mm clear shield with an anti-fog treatment. Central Visor Lock: Convenient center-mounted closure designed for operation while wearing racing gloves. Integrated Side Accessory Ports: Accommodate compatible radio, hydration, and ventilation accessories. Noise-Attenuating Earmuffs: Included removable earmuff cushions help reduce unwanted cockpit noise. Removable Cheek and Crown Padding: Allows fit adjustments using compatible Stilo interior components. Intermediate Oval Fit: Designed for a comfortable, secure fit across a variety of head shapes. Two Shell Sizes: Small and large exterior shells reduce unnecessary bulk. M6 FHR Terminals: Factory-installed threaded receivers accommodate approved HANS and head-and-neck-restraint anchors. Optional Forced-Air Compatibility: Supports compatible Stilo air-cooling accessories. Multiple Visor Options: Compatible with selected clear, tinted, mirrored, and iridium ST5 shields. Made in Italy: Manufactured and assembled using Stilo's motorsport helmet production processes. Lightweight Fiberglass/Kevlar Multi Sandwich Fiber Shell The Stilo ST5 GT Composite features an advanced Fiberglass/Kevlar Multi Sandwich Fiber (MSF) shell designed to balance structural strength, impact-energy management, and helmet weight. Its composite shell construction uses multiple reinforcing materials arranged to provide the protective performance required by Snell SA2020 and FIA 8859-2015. Stilo manufactures the composite shell using an autoclave molding process designed to deliver consistent construction and strength throughout the helmet. The ST5 GT Composite offers a premium alternative to conventional fiberglass racing helmets while maintaining a comfortable, manageable weight for extended driving sessions. Snell SA2020 and FIA 8859-2015 Racing Certification The Stilo ST5 GT Composite carries two recognized automotive motorsport safety certifications: Snell SA2020: Automotive racing helmet certification addressing impact performance and other motorsport-specific safety requirements. FIA 8859-2015: FIA homologation for racing helmets used in approved motorsport applications. These certifications make the ST5 GT Composite suitable for numerous road racing, club racing, track-day, and endurance racing applications where the relevant standards remain accepted. Important: FIA 8859-2015 is not the same as FIA 8860-2018. Racing organizations establish their own accepted certification standards and expiration requirements. Always verify helmet eligibility before competition. Large Eyeport for Exceptional Driver Visibility Visibility is one of the defining characteristics of the Stilo ST5 GT Composite. Its generous eyeport design provides excellent peripheral vision, allowing drivers to maintain greater awareness of mirrors, approaching competitors, dashboard instruments, and cockpit surroundings. The expanded opening is particularly valuable for GT and endurance racing, where situational awareness is essential when navigating traffic and monitoring vehicle information. The helmet's eyeport design also supports Stilo's extensive selection of replacement visors and optical accessories. 3mm Clear Anti-Fog Racing Visor The ST5 GT Composite includes a 3mm clear visor with anti-fog treatment designed to help maintain visibility in changing cockpit conditions. Stilo's central visor locking mechanism provides an accessible closure point that can be operated while wearing racing gloves. The ST5 visor platform supports multiple optional shield finishes, allowing drivers to tailor their setup for different lighting conditions. Compatible options may include clear, smoke, mirrored, and iridium finishes, depending on availability. Explore the Stilo ST5 and ST5.1 Replacement Helmet Shields for additional options. Integrated Side Ports for Maximum Customization One of the ST5 GT Composite's most distinctive features is its integrated side accessory port system. Unlike conventional racing helmets that may require external accessory mounting arrangements, Stilo designed the ST5 shell with dedicated side ports that accommodate compatible components while maintaining a clean helmet profile. Depending on the selected installation, the helmet can accommodate: Integrated communication electronics Compatible microphones and speakers Radio and intercom connection systems Driver hydration equipment and drinking tubes Side-air ventilation accessories Compatible air-cooling systems This modular configuration makes the ST5 GT particularly useful for endurance racing teams and drivers who need to customize their helmets for different vehicles. Communication electronics, hydration systems, air accessories, and other optional equipment are sold separately unless specifically included in the selected configuration. Noise-Attenuating Earmuffs for GT and Endurance Racing The Stilo ST5 GT Composite includes removable noise-attenuating earmuff cushions designed to reduce unwanted sound inside noisy competition vehicles. By creating additional isolation around the ears, these cushions can help improve driver comfort during extended racing sessions. They also provide a useful foundation for compatible integrated communication systems, allowing microphone and speaker equipment to be installed according to driver preference. For endurance racers, effective sound management can make radio communication easier to understand during long stints. Removable Cheek Pads and Adjustable Interior Fit Proper helmet fit is essential for protective performance, comfort, and stability. The ST5 GT Composite incorporates removable cheek and crown comfort padding, allowing compatible interior components to be exchanged when appropriate. This flexibility enables drivers to fine-tune the helmet's fit without compromising the integrity of the protective shell. The black Nomex interior provides fire-resistant materials suitable for automotive motorsport applications. Stilo's Intermediate Oval interior shape is designed to provide secure contact around the head while accommodating a broad range of drivers. Replacement pads must be selected specifically for the ST5 helmet platform and installed according to manufacturer recommendations. Two Shell Sizes for Reduced Weight and Bulk The Stilo ST5 GT Composite uses two exterior shell sizes to provide more proportional helmet dimensions across its available size range. The smaller shell accommodates helmet sizes 54, 55, 57, and 59, while the larger shell accommodates sizes 60, 61, 63, and 64. This approach helps reduce unnecessary exterior material around smaller head sizes while providing adequate interior dimensions for larger drivers. The transition between the small and large shell occurs at size 60, making it particularly important to evaluate fit when selecting between sizes 59 and 60. M6 HANS and FHR Anchor Compatibility The Stilo ST5 GT Composite includes factory-installed M6 threaded mounting receivers designed for approved Frontal Head Restraint hardware. These threaded mounting points allow compatible HANS and other FHR anchor posts to be installed without modifying the helmet shell. Important: M6 threaded receivers are included, but HANS/FHR anchor posts are sold separately unless specified in the selected package. Always use approved anchor hardware and follow the installation requirements of the helmet and head-and-neck-restraint manufacturers. Optional Forced-Air Cooling and Hydration Systems For drivers competing in hot environments or extended endurance races, the ST5 GT Composite can be configured with compatible Stilo ventilation and hydration accessories. Available configurations include selected side-air and top-air systems that can help introduce external cooling air into the helmet. Hydration accessories allow compatible drinking tubes to be routed through the helmet's integrated accessory system. The helmet's modular design helps keep these systems organized while reducing interference with the driver's comfort padding and cockpit equipment. Air-cooling hardware, hydration components, and external cooling equipment are available separately. Stilo ST5 GT Composite Helmet Specifications Manufacturer: Stilo Model: ST5 GT Composite Helmet Type: Full-face automotive racing helmet Snell Certification: SA2020 FIA Homologation: FIA 8859-2015 Shell Material: Fiberglass/Kevlar Multi Sandwich Fiber Shell Construction: Autoclave-molded composite Exterior Shell Sizes: Two Fit Profile: Intermediate Oval Interior: Black Nomex Comfort Padding: Removable cheek and crown pads Earmuffs: Removable noise-attenuating cushions included Included Shield: 3mm clear anti-fog visor Visor System: Central locking mechanism Compatible Shields: Stilo ST5 and ST5.1 FHR Mounting: Factory-installed M6 threaded receivers FHR Anchor Posts: Sold separately Accessory Ports: Integrated side-mounted system Communication System: Optional Hydration System: Optional Forced-Air Compatibility: Yes, with compatible accessories Chin Strap: Double D-ring Helmet Bag: Included Available Finishes: Silver, Matte Black, White Manufacturer Country: Italy Stilo ST5 GT Composite Sizing Chart  Stilo ST5 GT Composite Available Colors The ST5 GT Composite is offered in three traditional racing finishes: Silver: Metallic motorsport appearance with a premium gloss finish. Matte Black: Subtle, understated styling with a non-gloss exterior. White: Classic racing helmet appearance suitable for a wide range of driver equipment. Color and size availability may vary by remaining manufacturer inventory. Stilo ST5 GT Composite vs. ST5 GT Carbon The Stilo ST5 GT Composite and ST5 GT Carbon share the versatile ST5 platform, large eyeport, integrated accessory ports, and motorsport-focused design. The primary difference is the outer shell construction. ST5 GT Composite: Uses Stilo's fiberglass/Kevlar Multi Sandwich Fiber construction, providing a balance of performance, durability, and value. ST5 GT Carbon: Uses a carbon fiber shell designed to reduce weight while preserving the ST5 platform's flexibility and accessory compatibility. Both versions are intended for drivers who value integrated equipment options and a customizable GT racing helmet configuration. Ideal Applications for the Stilo ST5 GT Composite The ST5 GT Composite is designed for a wide range of automotive motorsport applications: GT Racing: Wide eyeport, noise-attenuating earmuffs, and optional communication integration. Endurance Racing: Compatible hydration, air-cooling, and radio accessory systems. Club Racing: Full-face construction and recognized Snell and FIA certifications. Track Days and HPDE: Comfortable, secure helmet design for performance driving. Touring Car Racing: Wide field of vision and modular communication options. Time Trials: Lightweight construction and supportive interior fit. Sprint Racing: Professional motorsport helmet features for competitive driving sessions. Always confirm that the helmet's Snell SA2020 and FIA 8859-2015 certifications remain accepted by your racing organization. Stilo ST5 GT Composite Frequently Asked Questions What certifications does the Stilo ST5 GT Composite have? The ST5 GT Composite carries Snell SA2020 and FIA 8859-2015 certifications. Confirm that these standards are accepted for your intended racing application. Is the Stilo ST5 GT Composite made from carbon fiber? The ST5 GT Composite uses a fiberglass/Kevlar Multi Sandwich Fiber shell. The ST5 GT Carbon is a separate model featuring carbon fiber construction. Does the Stilo ST5 GT Composite include HANS anchors? The helmet includes factory-installed M6 threaded receivers, but compatible HANS/FHR anchor posts are sold separately. Does the ST5 GT Composite come with a visor? Yes. A clear 3mm anti-fog visor is included. Can I install tinted or mirrored shields? Yes. Compatible Stilo ST5 and ST5.1 replacement shields are available in several optional finishes. Does the ST5 GT include built-in communications? The standard helmet includes accessory ports and removable earmuffs. Radio electronics, microphones, speakers, and compatible communication kits are available separately. Can I install a hydration system? Yes. The integrated side accessory ports support compatible Stilo hydration components. Can the ST5 GT Composite use a forced-air cooling system? Yes. Compatible side-air and top-air accessories allow integration with selected external cooling systems. Are the cheek pads removable? Yes. The comfort cheek pads can be removed or replaced with compatible Stilo components. Does the helmet include noise-attenuating earmuffs? Yes. Removable earmuff cushions are included to help reduce unwanted cockpit noise. What is the head shape of the ST5 GT Composite? The helmet has an Intermediate Oval interior profile. Proper fit should be confirmed by measuring and trying on the helmet. How many shell sizes does the ST5 GT Composite have? The helmet uses two exterior shell sizes. The smaller shell accommodates sizes 54 through 59, while the larger shell accommodates sizes 60 through 64 in the manufacturer's listed size options. Can I use ST5 replacement visors on an ST5.1 helmet? Stilo lists ST5 and ST5.1 visor compatibility for the corresponding shield family. Always verify the specific visor part number before ordering. Does the Stilo ST5 GT Composite include a helmet bag? Yes. A helmet bag is included with the standard helmet package. What is the difference between the ST5 GT Composite and ST5 GT Carbon? The Composite version uses fiberglass/Kevlar construction, while the Carbon model uses carbon fiber construction. Both share the modular ST5 GT design and compatible accessory systems. Is the Stilo ST5 GT Composite suitable for endurance racing? Yes. Its modular communication, hydration, and cooling compatibility make it well suited to endurance racing where the helmet's certification is accepted. Why Choose the Stilo ST5 GT Composite Racing Helmet? The Stilo ST5 GT Composite Snell SA2020 Racing Helmet delivers an outstanding combination of protective construction, comfortable interior design, excellent visibility, and integrated accessory versatility. From track-day driving to competitive endurance racing, its fiberglass/Kevlar composite shell, noise-attenuating earmuffs, wide eyeport, and modular side ports provide a configurable platform for drivers with a wide variety of racing requirements. Choose the ST5 GT Composite for proven Stilo engineering, professional motorsport performance, and the flexibility to build a helmet setup around your driving needs.

Sparco Sprint Pro Race Suit The Sparco Sprint Pro race suit is the latest evolution of the legendary Sprint, redesigned to incorporate significant upgrades. The Sparco Sprint has always offered tremendous fire protection, style and value. The new two-layer construction is lighter and more breathable than the previous model. The Sprint Pro has pre-curved, fully-floating sleeves and multiple stretch panels throughout for better breathability, mobility and comfort. The Sparco Sprint Pro is designed as a classic mono-color suit with dynamic contrasting colors on the side. It is available in sizes EU46 to EU66. Sparco Sprint Pro Race Suit Details: SFI 3.2A/5 and FIA 8856-2018 approved Fully-floating sleeves Pre-curved arms Ultra-soft knit arm and leg cuffs (under the outer fabric on the boot cuff) Multiple stretch panels for comfort Available in standard or boot cuff

Sabelt Enduro Silver Series Porsche GT2/GT3/GT4 Racing Harness 2030 Expiry Built specifically for the Porsche GT2, GT3, and GT4, this six-point Sabelt Enduro Silver Series racing harness provides all the safety and security you've come to expect from Sabelt in a package that makes installation in your Porsche extremely fast and easy. The Sabelt Silver Series harness is easily adjusted using bright yellow tabs that pull down, making securing and releasing your harness simpler than ever. NEW FULLY INTEGRATED CAM LOCK The newly designed cam lock buckle now integrates the sub belts into the fixture, greatly increasing driver safety in the event of an impact. A number of other handy features have been added, including Velcro communication/hydration routing on top of shoulder straps and silicone grip on the underside to keep your head-and-neck restraint device securely in place while on the track. Sabelt is an industry-leading manufacturer of motorsport harnesses and safety accessories, and their Silver Series Enduro Porsche racing harnesses stand out for good reason. SABELT SILVER SERIES ENDURO PORSCHE RACING HARNESS DETAILS Manufacturer: Sabelt Manufacturer part no.: CFCIxxx00024 FIA 8853-2016 homologation Available in black, blue, or red webbing New camlock buckle fully integrated with the sub belts Bright yellow pull-down straps for easy adjustment Velcro on shoulder straps secures loose ends Communication/hydration routing on shoulder belts

Alpinestars GP Pro Comp Complete Driver Gear Bundle – Suit, Gloves & Shoes The Alpinestars GP Pro Comp Complete Driver Gear Bundle combines three premium pieces of Alpinestars racing equipment into one complete driver setup: Alpinestars GP Pro Comp Race Suit – Boot Cuff Leg Alpinestars Tech-1 ZX v3 Nomex Racing Gloves Alpinestars Tech-1 Z v2 Racing Shoes This bundle is designed for racers who want a coordinated Alpinestars setup without having to purchase each piece separately. Suit, glove, and shoe sizes can be selected individually so each part of the package can be properly fitted to the driver. Alpinestars GP Pro Comp Race Suit – Boot Cuff Leg The GP Pro Comp Race Suit provides lightweight fire-resistant protection with a driver-focused construction designed for comfort and mobility inside the cockpit. Its three-layer aramid construction is combined with strategically positioned stretch panels to reduce restriction while driving. The fully floating arm design helps improve shoulder and arm movement, while the pre-shaped construction is designed around the seated racing position. The boot cuff leg extends over the top of the racing shoe for the clean professional appearance commonly seen in high-level motorsport. GP Pro Comp Suit Features: FIA 8856-2000 homologated SFI 3.2A/5 certified Lightweight three-layer construction 100% aramid outer shell Boot cuff leg design Knitted stretch panels Fully floating arm construction Pre-shaped racing fit Tall ribbed collar Adjustable waist belt Double-slider YKK front zipper Integrated thigh pockets Alpinestars Tech-1 ZX v3 Nomex Racing Gloves The Tech-1 ZX v3 is a premium Alpinestars racing glove engineered for high levels of protection while maintaining excellent steering-wheel feedback. Its dual-layer honeycomb aramid construction provides fire-resistant protection without creating unnecessary bulk. External seams help reduce pressure points inside the glove, while the pre-curved fingers follow the natural position of the hand around the steering wheel. A 3D silicone grip pattern on the palm and fingers provides secure steering-wheel contact while maintaining excellent feel and flexibility. Tech-1 ZX v3 Glove Features: FIA 8856-2018 homologated Dual-layer honeycomb aramid construction External seams Pre-curved fingers and palm 3D silicone palm and finger grip Lightweight and breathable construction Excellent steering-wheel sensitivity Touchscreen-compatible thumb and index finger Alpinestars Tech-1 Z v2 Racing Shoes The Tech-1 Z v2 Racing Shoe is designed around lightweight construction, secure foot support, and precise pedal feel. Its close-fitting sock-style construction wraps around the foot and ankle while helping reduce unnecessary bulk. The Alpinestars speed-lacing system provides a secure fit, while the thin racing outsole helps maximize feedback through the throttle, brake, and clutch pedals. Perforated sections help improve airflow during long track sessions. Tech-1 Z v2 Shoe Features: SFI 3.3/5 homologated Premium bovine leather upper Sock-style ankle construction Aramid speed-lacing system Lace Lock System Para-aramid tubular lining Lightweight heel and footbed padding Perforated construction for ventilation Thin racing rubber outsole Excellent pedal sensitivity Integrated toe and heel reinforcement Complete Alpinestars Driver Setup This package creates a complete Alpinestars driver gear combination from the pedals to the steering wheel. The GP Pro Comp suit provides the primary layer of protection, the Tech-1 ZX v3 gloves provide secure steering-wheel grip and feedback, and the Tech-1 Z v2 shoes provide the sensitivity needed for precise pedal control. Because each item is sized independently, drivers do not have to compromise by purchasing a bundle with predetermined matching sizes. Bundle Certifications GP Pro Comp Suit: FIA 8856-2000 / SFI 3.2A/5 Tech-1 ZX v3 Gloves: FIA 8856-2018 Tech-1 Z v2 Shoes: SFI 3.3/5 Certification requirements can vary by racing organization and class. Always verify your sanctioning body's current requirements before competition. Questions About the Alpinestars Driver Gear Bundle Can I choose different sizes for the suit, gloves, and shoes?Yes. The suit, gloves, and shoes can each be sized individually so you can build the proper fit for your complete racing setup. Does the bundle include all three products?Yes. The bundle includes one GP Pro Comp boot cuff race suit, one pair of Tech-1 ZX v3 Nomex racing gloves, and one pair of Tech-1 Z v2 racing shoes. What does boot cuff leg mean?The boot cuff design allows the lower portion of the suit leg to extend over the top of the racing shoe rather than ending with a traditional elastic ankle cuff. Are all three pieces certified to the same standard?No. Each product carries its own certification based on the type of racing equipment. Always check your racing organization's requirements. Are the Tech-1 ZX v3 gloves designed for a close fit?Yes. They use a pre-curved, close-fitting racing design intended to minimize excess material and maintain steering-wheel feel. Are the Tech-1 Z v2 shoes designed for pedal feel?Yes. Their lightweight construction and thin racing sole are specifically designed to improve sensitivity and feedback through the pedals.

Sparco Sprint Driver Race Suit The Sparco Sprint Driver Race Suit is the latest evolution of Sparco’s legendary Sprint suit, redesigned with meaningful upgrades for improved comfort, protection, and value. Long trusted by drivers for dependable fire protection and classic Sparco styling, the updated Sprint brings a lighter and more breathable 2-layer aramid construction to one of the most popular entry-level racing suits in motorsports. Designed for drivers who need certified safety without sacrificing mobility, the Sparco Sprint features pre-curved arms, full-floating sleeves, ultra-soft knit cuffs, and multiple stretch panels throughout the suit. These updates help improve flexibility in the car while reducing restriction around the shoulders, arms, and waist. The Sprint is built with clean mono-color styling and subtle contrasting accents, giving drivers a professional look that works across club racing, HPDE, endurance racing, and competition use. Available in both standard cuff and boot cuff options, the Sparco Sprint Driver Race Suit delivers strong safety, comfort, and value for racers building a complete driver gear setup. Sparco Sprint Driver Race Suit Details 2-Layer Aramid Construction: Lighter and more breathable than the previous Sprint design while maintaining dependable fire protection. Full-Floating Sleeves: Allows better arm movement and reduces restriction while driving. Pre-Curved Arms: Designed around the natural seated driving position for improved comfort behind the wheel. Ultra-Soft Knit Cuffs: Soft arm and leg cuffs provide comfort and help keep the suit positioned correctly. Multiple Stretch Panels: Stretch zones improve mobility, breathability, and overall fit. Classic Mono-Color Styling: Clean single-color suit design with subtle contrasting shades for a professional race-ready look. Standard or Boot Cuff Options: Available in traditional standard cuff or boot cuff configurations depending on driver preference. Safety Approved: SFI 3.2A/5 and FIA approved for competition use. Sparco Sprint Race Suit Technology Full-floating sleeves for improved driving mobility. Pre-curved arms for reduced bunching in the cockpit. Ultra-soft knit cuffs for added comfort. Multiple stretch panels for flexibility and better fit. Lightweight 2-layer aramid construction. Available in standard cuff or boot cuff versions. SFI 3.2A/5 and FIA approved. Sparco Sprint Driver Race Suit Sizing Chart  Why Choose the Sparco Sprint Driver Race Suit? The Sparco Sprint Driver Race Suit is ideal for racers who want proven Sparco protection, a comfortable fit, and excellent value. Its lightweight 2-layer construction, floating sleeves, pre-curved arms, and stretch panels make it easier to move naturally in the car while still providing certified fire protection for competition use. Whether you are building your first complete racewear setup or replacing older driver gear, the Sparco Sprint remains one of the best-value racing suits for drivers who need real safety, comfort, and classic Sparco style.

Alpinestars GP Tech v3 Driver Race Suit The Alpinestars GP Tech v3 race suit features an outer shell twill material developed exclusively for Alpinestars, combined with an innovative aramidic-based knit lining for optimum levels of comfort, protection, light weight, and comfort. Thanks to this aramidic base lining with its open-weave structure, plus breathable mesh side panels, this Alpinestars GP Tech v3 is superb at maintaining air flow and regulating body temperature. The Alpinestars GP Tech v3 race suit also incorporates lightweight stretchable panels at the center back, lower back, elbows, crotch, and knee areas to provide great flexibility both in and out of the car. Alpinestars GP Tech v3 Race Suit Protection Certified to the latest FIA 8856-2018 homologation standard Super lightweight and breathable multi-layer suit incorporating thin stretchable panels for maximum comfort and effective regulation of body temperature Nomex antistatic outer shell fabric for exceptional heat- and flame-resistance Laundry bag included for convenience and effective material fiber protection Alpinestars GP Tech v3 Race Suit Construction Strategically positioned Formula One derived stretch panels on the center back and spine, lower back, elbows, crotch and knees for enhanced maneuverability both in and out the car. Alpinestars fully-floating arms with stretchable knit fabric ensure minimal material resistance while driving Soft, thin wrist and ankle cuffs for maximum comfort and reduced weight Soft knit collar with secure hook-and-loop closure for improved comfort Alpinestars exclusive shoulder epaulette construction provides for effective driver extraction in the event of a crash Printed logos help maintain outer material integrity and reduce weight Alpinestars GP Tech v3 Race Suit Details Manufacturer: Alpinestars Manufacturer part no.: 3354120 Premium YKK lightweight zipper with Alpinestars leather pull and double slider for a versatile, customizable fit. Thigh pockets for convenient, unobtrusive storage. Athletic fit Weight: 325g/m2 Alpinestars GP Tech v3 Driver Race Suit Sizing Chart

Alpinestars GP Race v2 Boot Cut Driver Suit The GP Race v2 Race Suit is a multi-layer race suit developed for all-round drivers racing in advanced competitions. Compliant with FIA Standard 8856-2018, the GP Race v2 race suit has an athletic regular fit and has a three-layer construction; one layer of aramidic twill and two layers of aramidic base knit. This assembly offers an increase of 5% in breathability performance, while still maintaining a light weight at 400g/sqm. The race suit also incorporates knitted stretch panels for maximum comfort on the armholes, lower back and crotch areas, with a larger and longer back panel to really aid driver flexibility and range of movement, while the internal flat seam, fully floating arm and extended shoulders provide even greater levels of driver comfort. ALPINESTARS GP RACE V2 BOOT CUT RACE SUIT PROTECTION Certified to the new FIA 8856-2018 homologation standard. Alpinestars fully floating arm construction with stretchable knit fabric ensures minimal material resistance while driving. Sold with laundry bag for convenience and effective material fiber protection. ALPINESTARS GP RACE V2 BOOT CUT RACE SUIT CONSTRUCTION Multi-layer lightweight race suit incorporating knitted stretchable panels for maximum comfort and excellent breathability. Aramidic knitted stretchable panels on back, waist and crotch for enhanced comfort and ease of movement. Ergonomic collar with soft knitted lining for extended coverage and maximum comfort. 100% Aramidic outer shell fabric for exceptional heat and flame-resistant proprieties. Adjustable collar and belted waist ensure a precise fit. Anatomical arm, leg and torso patterned paneling for an optimum fit in the driving position. Alpinestars exclusive shoulder epaulette construction provides an effective feature for the extraction of the driver in the event of a crash. ALPINESTARS GP RACE V2 BOOT CUT RACE SUIT KEY FEATURES Ribbed, stretchable wrist and foot cuffs for optimum comfort Premium YKK double-slider zipper personalized for a versatile and customizable fit Thigh pockets for convenient, peace-of-mind storage Regular fit design Weighs 400 g/m2

Alpinestars GP Race v2 Driver Suit The GP Race v2 Suit is a multi-layer race suit developed for all-round drivers racing in advanced competitions. Compliant with the new FIA Standard 8856-2018, the GP Race v2 Suit has an athletic regular fit and has a three-layer construction; one layer of aramidic twill and two layers of aramidic base knit. This assembly offers an increase of 5% in breathability performance, while still maintaining a light weight at 400 g/m2. The suit also incorporates knitted stretch panels for maximum comfort on the armholes, lower back and crotch areas, with a larger and longer back panel to really aid driver flexibility and range of movement, while the internal flat seam, fully floating arm and extended shoulders provide even greater levels of driver comfort. ALPINESTARS GP RACE V2 SUIT PROTECTION Certified to the new FIA 8856-2018 homologation standard. Alpinestars fully floating arm construction with stretchable knit fabric ensures minimal material resistance while driving. Includes laundry bag for convenience and effective suit fiber protection. ALPINESTARS GP RACE V2 SUIT CONSTRUCTION Multi-layer lightweight suit incorporating knitted stretchable panels for maximum comfort and excellent breathability. Aramidic knitted stretchable panels on back, waist and crotch for enhanced comfort and ease of movement. Ergonomic collar with soft knitted lining for extended coverage and maximum comfort. 100% Aramidic outer shell fabric for exceptional heat and flame-resistant proprieties. Adjustable collar and belted waist ensure a precise fit. Anatomical arm, leg and torso patterned paneling for an optimum fit in the driving position. Alpinestars exclusive shoulder epaulette construction provides for the extraction of the driver in the event of a crash. ALPINESTARS GP RACE V2 SUIT KEY FEATURES Ribbed, stretchable wrist and foot cuffs for optimum comfort. Premium YKK double slider zipper for a versatile and customizable fit. Thigh pockets for convenient, peace-of-mind storage. Regular fit design. Weighs 400 g/m2 SKU 3355020

Sparco Eagle LT Driver Race Suit (Limited Edition) The Sparco Eagle LT is a limited-edition race suit available only for the US market. The Sparco Eagle LT race suit features an all-new design boasting two terrific colorways. Because this is a limited edition suit, it is only available while supplies last. Single-Layer Comfort, Multi-Layer Protection The Sparco Eagle LT race suit is the result of more than three years of Sparco research and development. Among other innovations, Sparco patented a new race suit material technology called HOCOTEX®, which revolutionizes the way racing fire suits are made. This exclusive Sparco technology creates a single-layer fabric that exhibits heat and fire protection previously achievable only using multi-layer suit construction. As a result, the Sparco Eagle LT race suit is a single-layer racing fire suit that is FIA 8856-2000 certified. Breathability And Flexibility Thanks to HOCOTEX®, the Sparco Eagle LT race suit is three times more breathable than a race suit offering similar fire protection, but produced using traditional technology. The use of this single-layer fabric, along with large side and rear stretch panels and 360º arm gussets, gives the Sparco Eagle LT amazingly easy flexibility and range-of-motion. The flexible panels in the Eagle LT use another new Sparco material called Eagle fabric. This elasticized mesh is lighter, more breathable, and more abrasion resistant than traditional stretch material. Again, all while maintaining exceptional heat- and fire-resistance. How Does HOCOTEX® Work, Exactly? Traditional racing suits have two or three layers of fabric sewn together with a quilted pattern embroidered into them. The quilting creates air pockets between the layers which expand when heated. This is how traditional racing fire suits provide thermal protection to the wearer. HOCOTEX®, on the other hand, consists of a honeycomb structure with 60,000 internal air microcells that insulate the wearer from fire and heat to an even greater degree than traditional box quilting. The result is the Sparco Eagle LT provides a 10% to 12% increase in heat-protection performance. Sparco Eagle LT Driver Race Suit Details FIA 8856-2000 approved Single-layer construction, multi-layer protection Three times more breathable than a standard racing suit Fully-floating 360o arm gussets Large stretch panels on the sides and back with new breathable fabric HOCOTEX® and Eagle patented Sparco material technology Designed and made in Italy

Sparco Extrema S Driver Race Suit Save $1,100 off the suggested retail price! The Sparco Extrema S racing suit takes the same patented Hocotex® material used in Sparco's successful Eagle line and incorporates it into a classically-styled fire suit. Three times as breathable as a traditional multi-layered racing suit, 360º fully-floating arm gussets on the Sparco Extrema S are combined with a stretchable mesh back panel for maximum flexibility and comfort. Extra-flat seams provide additional comfort, while traditional design touches such as classic Sparco epaulettes and seamless ankle/wrist cuffs make this suit a perfect platform for sponsor logos! How Does Sparco Hocotex Work? Racing suits are traditionally constructed using multiple layers of fabric sewn together with an embroidered quilted pattern. This quilting creates air pockets between the layers which expand when exposed to extreme heat and flames, creating a thermal protection barrier for the driver. Sparco Hocotex® uses a honeycomb structure with over 60,000 internal air cells, compared to 300 quilted chambers in a traditional suit. The result is a 10% to 12% increase in protection from heat versus the traditional quilting method. Sparco Extrema S Driver Race Suit Details: FIA 8856-2000 approved Weight: 290 to 320 g/m2 Pre-curved arms and legs Strategically-placed mesh stretch panels Seamless arm and leg cuffs Available in white or black Available in EU sizes 48 to 66

Sparco 6 Point 3" Competition Pull Down Aluminum Racing Harness (2030 Expiry) When you’re pushing the limits on track, your harness is your lifeline. The Sparco 6-Point Competition H-3 PD Racing Harness is engineered to keep you secure, focused, and in control through every braking zone and corner. The Sparco FIA H-3 Competition 6-Point Aluminum Racing Harness boasts 3" shoulder straps, 2" lap and sub belts, an aluminum camlock, and aluminum adjusters. The snap-in hardware and eyebolts included with the six mounting points facilitate a simple installation process. Its professional aircraft-style camlock buckle guarantees effortless belt engagement, while the steel adjusters allow for easy adjustments. Whether you're chasing tenths in time attack or racing wheel-to-wheel, this FIA-approved harness is built for serious performance and protection. Why Choose the Sparco Pull Down Aluminum Racing Harness? 6-Point Design: Helps keep the driver stable and secure under braking and cornering loads. 3" FHR Shoulder Straps: Designed for use with HANS and other FHR devices. 2" lap and sub strap belts Aluminum Buckle: Lightweight quick-release design for fast exit. Aluminum Adjusters: Durable hardware for a secure fit. Pull-Down Abdominal Adjusters: Easy tightening and adjustment. Snap Hooks and Compact T-Bar: Secure attachment and straightforward installation. Sparco Pull Down Aluminum Racing Harness Specifications Type: 6-Point Racing Harness Strap Width: 3" FHR-specific Material: High-strength webbing with aluminum and steel components Adjusters: High-resistance steel with pull-down abdominal adjustment Attachment: Snap hooks with compact T-bar FIA Certification: HOM. NO: SH.076.20-T-6 Sparco Pull Down Aluminum Racing Harness FAQs Is this harness FIA approved?Yes. It carries FIA HOM. NO: SH.076.20-T-6 certification for competition use. Can I use it with a HANS device?Yes. The 3-inch shoulder straps are designed for FHR compatibility. How does it install?The harness uses snap hooks for easy mounting. Reinforced eye-bolt anchors are recommended for custom installations. Is it suitable for endurance racing?Yes. The pull-down adjusters and compact T-bar help maintain comfort and alignment during long sessions. Lock In. Stay Safe. Drive Faster. The Sparco 6-Point Competition H-3 PD Racing Harness delivers FIA-approved protection, secure fitment, and race-ready confidence for serious drivers.

Sparco Winter Jacket The Sparco Winter Jacket merges iconic racing style with advanced cold-weather tech, so you can stay toasty, dry, and seriously stylish whether you’re trackside or tackling your morning commute. Ultimate waterproof and windproof winter protection Sparco Winter Jacket Features Waterproof dual-density insulation that traps heat without bulk Windproof shell to block bone-chilling gusts Insulated hood with magnetic neck closure for quick adjustments Elastic cuffs seal out drafts and snow European fit that runs small—order one size up Sizes: XS – 3XL; made in Italy Sparco Winter Jacket FAQs How can I avoid looking like a marshmallow under all that insulation? You won’t. The dual-density insulation is sleek and lightweight, so you’ll stay warm without the fluff. Is the magnetic neck closure reliable? It’s like a pit-stop pitstop—snap it shut once and you’re locked in without wrestling with zippers. Can I still rock this jacket off-track? Totally. With Italian craftsmanship, it’s built to turn heads at winter coffee runs or casual outings. What size should I grab? Because of the European cut, size up from your usual US fit for the perfect balance of warmth and mobility. Dominate winter with the Sparco Winter Jacket—where performance meets legendary racing heritage. Add to cart now and stay in pole position, no matter the forecast.

Alpinestars Knoxville v2 Driver Race Suit The Alpinestars Knoxville v2 Driver Race Suit is built for racers who need trusted SFI-rated protection, comfort, and mobility in a durable multi-layer design. Featuring a strong fire-resistant cotton twill outer shell, Feltro padding, and a comfortable inner lining, the Knoxville v2 delivers dependable heat and flame protection for competitive motorsport use. Certified to the SFI 3.2A/5 homologation standard, the Alpinestars Knoxville v2 combines three-layer protection with stretch panel construction in key movement zones. Stretch panels at the crotch, waist, underarms, shoulders, and back help improve driver comfort and range of motion while seated in the cockpit. Three-Layer SFI 3.2A/5 Protection The Knoxville v2 racing suit features a multi-layer construction with fire-resistant fabric throughout for high heat and flame resistance. Its cotton twill shell and lining are paired with Feltro padding to provide the protection drivers need while maintaining a comfortable feel during long sessions behind the wheel. Designed for Driver Comfort and Mobility Alpinestars stretch arm construction with aramidic knit fabric helps reduce material resistance while driving. Anatomically patterned arms, legs, and torso panels are designed to optimize fit in the seated driving position, while pre-curved arms and legs allow the suit to move naturally with the driver. Secure Fit and Professional Racing Details The Alpinestars Knoxville v2 includes a belted waist for a precise fit, ribbed stretchable wrist and foot cuffs for comfort, and a boot-cut leg design with inner knitted elasticated cuffs for added fire protection. The extended ergonomic collar with soft knitted lining improves coverage and comfort, while thigh pockets provide convenient storage. Alpinestars Knoxville v2 Driver Race Suit Features Certified to SFI 3.2A/5 homologation standard Three-layer fire-resistant racing suit construction Strong fire-resistant cotton twill outer shell and lining Feltro padding for enhanced driver protection Fire-resistant fabric throughout for high heat and flame resistance Alpinestars stretch arm construction with aramidic knit fabric Knitted stretch panels for comfort and heat resistance Aramidic stretch panels on the back, waist, and crotch Stretch panels at crotch, waist, shoulders, and underarms Pre-curved arms and legs for improved driving position fit Anatomical arm, leg, and torso patterned paneling Extended ergonomic collar with soft knitted lining Alpinestars-exclusive shoulder epaulette construction for driver extraction Boot-cut leg design with inner knitted elasticated cuffs Ribbed stretchable wrist and foot cuffs Premium metal double-slider zipper Thigh pockets for convenient storage Belted waist for a precise fit Comfort fit design Fabric weight: 550 g/m² Why Choose the Alpinestars Knoxville v2 Driver Race Suit? The Alpinestars Knoxville v2 is a strong choice for drivers looking for SFI 3.2A/5 protection with a comfortable, mobility-focused design. With its three-layer construction, stretch panel layout, pre-curved fit, and Alpinestars driver extraction features, the Knoxville v2 is built to support serious racers in demanding conditions. Alpinestars Knoxville v2 Driver Race Suit FAQs Is the Alpinestars Knoxville v2 Driver Race Suit SFI approved?Yes. The Alpinestars Knoxville v2 Driver Race Suit is certified to the SFI 3.2A/5 homologation standard. How many layers does the Alpinestars Knoxville v2 suit have?The Knoxville v2 uses a three-layer construction with fire-resistant cotton twill and Feltro padding for driver protection. Does the Knoxville v2 have stretch panels?Yes. The suit includes stretch panels on the crotch, waist, underarms, shoulders, and back for improved comfort and mobility. Is the Alpinestars Knoxville v2 comfortable in the driving position?Yes. The suit features pre-curved arms and legs, anatomical paneling, stretch arm construction, and a comfort fit design optimized for seated driving. What is the fabric weight of the Alpinestars Knoxville v2?The Alpinestars Knoxville v2 has a fabric weight of 550 g/m².

Sparco X-Light+ Racing Shoes The Sparco X-Light+ Racing Shoes are ultra-lightweight professional racing shoes designed for drivers who want maximum weight savings, breathable comfort, and exceptional pedal feel. Built with FIA 8856-2018 approval, fire-retardant stretch fabric, Kevlar support cables, and a carbon fiber midsole, the X-Light+ is engineered for elite-level motorsport performance. The X-Light+ uses a full fabric upper that wraps the foot like a second skin, helping keep dust, debris, and unwanted material out of the shoe while maintaining comfort and flexibility. This breathable fireproof stretch fabric was developed by Sparco to provide protection, durability, and a close fit without unnecessary weight. Sparco X-Light+ Racing Shoe Features FIA 8856-2018 approved for motorsport competition use. Ultra-lightweight fire-retardant stretch fabric upper. Full fabric upper fits like a second skin for comfort and support. Kevlar cables woven into the upper provide added foot support. Full carbon fiber inlayed sole runs from heel to toe. Ultra-thin outsole improves pedal sensitivity and control. Anti-static, oil-resistant, and fuel-resistant outsole construction. Highly breathable design helps reduce heat buildup. Cushioned inner sole with printed silicone pattern improves traction and pedal feel. Designed for top-level professional drivers focused on weight savings and performance. Ultra-Lightweight Second-Skin Fit The Sparco X-Light+ is built around a fire-retardant stretch fabric upper that conforms closely to the foot. This second-skin fit helps reduce excess movement while keeping the shoe lightweight and breathable. The fabric construction also helps prevent dust, soil, and debris from entering the shoe during race use. Kevlar Cable Support Kevlar cables are woven into the upper to provide the right amount of support without adding unnecessary bulk. This helps the shoe remain flexible and comfortable while still giving the driver a secure, confidence-inspiring fit. Carbon Fiber Midsole The X-Light+ features a full carbon fiber inlayed sole developed by Sparco engineers. This flexible carbon fiber structure runs from the heel to the toe and is visible through the ultra-thin outsole. The design helps deliver outstanding pedal sensitivity while maintaining support and protection. Ultra-Thin Racing Outsole The outsole is ultra thin to maximize pedal feel and driver feedback. It is also anti-static, oil resistant, and fuel resistant, making it suitable for the cockpit, paddock, and garage environment. Printed Silicone Inner Sole The cushioned inner sole includes a printed silicone pattern to improve traction inside the shoe. This helps keep the foot planted while enhancing overall pedal feel and control during braking, throttle modulation, and quick pedal transitions. Available Colors Black White/Black Black/Orange Black/Yellow Black/Red Sparco X-Light+ Racing Shoe Specifications Approval: FIA 8856-2018 Upper: Fire-retardant stretch fabric with soft leather construction Support: Kevlar cables woven into the upper Sole: Full carbon fiber inlayed sole Outsole: Ultra-thin, anti-static, oil-resistant, and fuel-resistant Inner Sole: Cushioned inner sole with printed silicone pattern Fit: Breathable second-skin fit Use: Professional motorsport, road racing, endurance racing, track days, and competition driving Sparco X-Light+ Racing Shoes Sizing Chart Sparco X-Light+ Racing Shoe FAQs Are the Sparco X-Light+ Racing Shoes FIA approved?Yes. The Sparco X-Light+ Racing Shoes are FIA 8856-2018 approved for motorsport competition use. What makes the Sparco X-Light+ so lightweight?The X-Light+ uses a fire-retardant stretch fabric upper, lightweight support materials, and an ultra-thin racing outsole to reduce weight while maintaining protection and performance. Does the Sparco X-Light+ have a carbon fiber sole?Yes. The X-Light+ features a full carbon fiber inlayed sole that runs from heel to toe for support, flexibility, and pedal sensitivity. Are these shoes breathable?Yes. The stretch fabric upper is highly breathable and designed to fit closely around the foot while helping reduce heat buildup. Is the outsole oil and fuel resistant?Yes. The ultra-thin outsole is anti-static, oil resistant, and fuel resistant for racing and paddock environments. What colors are available?The Sparco X-Light+ Racing Shoes are available in Black, White/Black, Black/Orange, Black/Yellow, and Black/Red.